Kjøp brukt Stocker (198)

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2000, driftstimer: 10 194 h, lastekapasitet: 7 000 kg, løftehøyde: 4 000 mm, fri løftehøyde: 325 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 2 900 mm, gaffelbærerbredde: 1 450 mm, egenvekt: 9 840 kg, total lengde: 4 800 mm, drivtype: Diesel, konstruksjonsbredde: 2 200 mm, Sideload forklift Load centre: 700 mm Kwedpfxowacbdo Afret Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 3.00-15 Rear tyres type: Superelastic Rear tyres size: 3.00-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk facilities. Visit our website - sago-online. Hire-purchase and financing on attractive terms are always available. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr Peter Sawitzki, will be pleased to advise you in detail about this J/SH70/14/40. P.S.: Our master workshop is specialised in repair, maintenance, overhauls, and custom builds for forklifts from 8 tons and up. We are also happy to showcase your vehicle for commission sale at our facility. Heater, full cab, Platform height: 1,030 mm

Tilstand: nesten som ny (brukt), Byggeår: 2022, Nous proposons actuellement une sélection de moteurs SEW Eurodrive neufs (jamais utilisés). Les moteurs étaient auparavant stockés comme pièces de rechange dans un grand entrepôt automatisé. Tous les moteurs sont en état « comme neuf ». Ils peuvent être achetés individuellement ou en lot. Expédition possible sur demande. Consultez les informations de stock ci-dessous : Palette 1 : - 1 moteur réducteur — Réf. : R67 DRN100L4/BE5HR/T - 1 moteur réducteur Movimot — Réf. : R37 DRN90L4/MM15/MO - 2 moteurs réducteurs à couple conique hélicoïdal — Réf. : KA49T DRN90S4/BE2HR/TF Palette 2 : - 2 moteurs réducteurs à couple conique hélicoïdal — Réf. : KA49T DRN90S4/BE2HR/TF - 1 moteur réducteur à couple conique hélicoïdal — Réf. : KA67/T DRN112M4/BE5HR/TF - 1 moteur réducteur Movimot — Réf. : R37 DRN90L4/BE2/MM15 Kwsdpfxoxr N R To Afret Palette 3 : - 1 moteur réducteur — Réf. : R27 DRN80M4/BE1 - 1 moteur réducteur Movimot — Réf. : R27 DRN80MK/BE05/MM05/MO/IV - 1 moteur réducteur Spiroplan — Réf. : WF30 DRN80M4/BE1HF/TH/ES7S - 1 moteur réducteur Movimot — Réf. : R37DRN90L4/BE2/MM15 Palette 4 : - 3 moteurs réducteurs Spiroplan Movimot — Réf. : WA30/T DRN71M4/MM03

Byggeår: 2010, Tilstand: svært god (brukt), maskin-/kjøretøynummer: RESHGFW, DEMAG KBK Crane System Crane Runway – various cranes with different dimensions in stock – please inquire! Load Capacity / Lifting Capacity 125 KG – 1000 KG – Please inquire Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with elevated travel mechanism – crane girder is positioned between both running rails for maximum lifting height Ksdpfx Afjrwi Slsrswt System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/suspenders, etc. incl. chain hoist Crane is dismantled and immediately available Several cranes available, pictures are for illustration purposes Very good condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are standard stock items! Other KBK systems also in stock. Load capacity 125 KG – 1600 KG Please inquire about your crane runway with required load capacity and dimensions without obligation.

Tilstand: ny, Byggeår: 2024, Funksjonalitet: fullt funksjonell, type innstrømsstrøm: trefaset, total høyde: 690 mm, total bredde: 325 mm, total lengde: 890 mm, inngangsspenning: 400 V, jordkabel lengde: 3 000 mm, totalvekt: 42 kg, garantiperioden: 24 måneder, sveisstrøm ved 60 % intermittens: 250 A, Hello, we are the Belgian importer for the Stayer range, and we have a large stock of this unit available. Quantity pricing available: - For 1 unit: €1,800 excl. VAT / unit - For 3 units: €1,440 excl. VAT / unit - For 10 units: €1,080 excl. VAT / unit Synergic MIG-MAG welding machine, suitable for coated electrodes and spot welding. - Easy polarity reversal for flux-cored wire. - Two high-brightness displays for simultaneous real-time monitoring of current and voltage. - Manufactured in compliance with strict European directives 2014/35/EU, 2014/30/EU, 2011/65/EU and IEC 60974. - Suitable for 3x400 generator operation. Handles voltage fluctuations of ±17%. - Professional wire feeder with a 60W motor, safe and stable transmission, designed for large 15kg reels. Includes wire feed rollers with grooves for 0.6 mm, 0.8 mm and 1 mm wire. Technical Data: - Power: 250 A Kodpfx Afeuh A U Aorewt - Voltage: 230 / 400 V - Duty Cycle: 60% - Electrode diameter: 1.6 - 6.0 mm - Wire thickness: 0.6 - 0.8 - 1.0 mm - Spool capacity: 5 - 15 kg - To be used with generator: 12 KVA / 230V ±17% - Dimensions: 89 x 69 x 32.5 cm - Weight: 42 kg - DINSE terminal 1/2” (35 - 50) ø - Power cable: 2 m x 2.5 mm² - Earth clamp cable: 3 m - 25 mm² - Electrode holder cable: 3 m - 25 mm² - MIG torch 25 AK - Gas hose: 3 m - x2 (0.8 - 1.0) mm

Tilstand: svært god (brukt), Byggeår: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine/Device Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200-250 VAC, 50 to 60 Hz, typical. Star Connection: 3-phase network with neutral, 200-250 V between L and N. Delta Connection: 3-phase network without neutral, 200-250 V between two phases. LOAD CONNECTION 16 A per channel (fuse 16 A super-fast "FF 16A") Phase load: max. 32 A Phase L1: Channels 1-6, 19-24 Phase L2: Channels 7-12 Phase L3: Channels 13-18 MAXIMUM OUTPUTS DPT6 7.3 kW (1 x 32 A) TYPE OF LOAD Only resistive loads permitted SENSOR CONNECTION Thermocouple Type L (Fe-CuNi) (compensation electronic) Thermocouple Type J (Fe-CuNi) (compensation electronic) Thermocouple Type K (NiCr-Ni) (compensation electronic) Thermocouple Type N (NiCrSi-NiSi) (compensation electronic) OK OUTPUT Potential-free normally open contact (max. 230V/1 A, not fused) DECREASE INPUT Connection for a potential-free normally open contact MAINS CABLE CEE Plug 32 A (prepared for star wiring) HOT RUNNER CONNECTION Load connection: 2 x 24-pole HAN-E socket connectors Thermo connection: 2 x 24-pole HAN-E pin connectors FUSES Load output fuse: FF 16A, 6.3 x 32 mm, type Schurter SA Control fuse slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 - 700°C / 0 - 999°F DECREASE Adjustable from 0 - 200°C / 0 - 360°F INCREASE Adjustable from 0 - 100°C / 0 - 180°F SAFETY SHUTOFF Adjustable from 0 - 700°C / 0 - 999°F DATA BACKUP Power failure safe, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C Kjdpfoxx Ti Tjx Afrowt OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x x mm Approx. 16.0 kg HOUSING COLOR Aluminum / blue / gray (RAL 9006 / RAL 5002)

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1999, driftstimer: 13 969 h, lastekapasitet: 6 000 kg, løftehøyde: 4 010 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 3 500 mm, gaffelbærerbredde: 1 200 mm, gaffellengde: 1 390 mm, egenvekt: 11 800 kg, total lengde: 4 480 mm, drivtype: Diesel, konstruksjonsbredde: 2 200 mm, Sideload forklift Kjdpfx Afswbk N Ssrswt Load center: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Fantuzzi model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing options are always available at attractive conditions. We also purchase your used machines outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this SF60U. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your equipment for commission sale at our facility. Heater, full cabin, Platform height: 1050 mm

Tilstand: brukt, Byggeår: 2018, Nr. 3085 Chopper / Recyclable Material Shredder WEIMA WLK 800 Used, year of manufacture: 08/2018 Approx. 1,200 operating hours Suitable for various materials such as hard plastics, paper, films, filaments, wood or textiles. Feed opening: 800 x 1450 mm F-Rotor Rotor diameter: 260 mm Rotor speed: approx. 100 rpm Motor power: 30 kW Bolted knives Including various spare knives and screens Transport dimensions: approx. 3400 x 1750 x 2100 mm (LxWxH) Weight: approx. 2,500 kg Sale on behalf of customer, ex location Hesse To avoid potential misunderstandings, an on-site inspection by prior appointment is possible and recommended. Sale is as-is. Technical data, condition description, year of manufacture and delivery scope as per manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. No warranty on used machines. Sale is as seen and agreed. Images and videos are for reference only and do not represent the actual scope of delivery. Kwodekzkwmepfx Afret Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex-stock or location

Tilstand: ny, Byggeår: 2025, Condition: new Year of manufacture: 2025 Stock number: 080112 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €86,376 Leasing rate: €1,438.29 Quantity in stock: 1 Special price: €76,100 Pressing force: 175 tons Kjdpfxswirano Afrjwt Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth: 450 mm Open height: 530 mm Drive system: hydraulic Rapid traverse Y axis: 160 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 100 mm/s Back gauge speed X axis: 500 mm/s Back gauge speed R axis: 350 mm/s Back gauge stroke R axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 10,900 kg 4 axes (Y1, Y2, X and R axis) CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touch-screen operation (easy contour drawing with your finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of blank length for sheet metal cutting - Graphic product and tool storage - Correction capability - USB ports for backup and program transfer - PC software allows programs to be created on a PC and then transferred to the machine via USB Servo-driven back gauge on linear guides and ball screws Back gauge fingers on dual linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and goosenecked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Increased stroke, open height, and throat depth - Higher approach and return speed of upper beam - Higher back gauge speed - Back gauge fingers on double rather than single linear guides - More options available, e.g. additional back gauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls … OPTIONS (DELIVERY TIME FOR THESE OPTIONS APPROX. 10 WEEKS): Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamping lever for top tool

Tilstand: nesten som ny (brukt), "Mogensen Sizer Type SL 2066" for sale You can find our complete stock list on our website. Kwodpfsggfkxox Afrst Manufacturer: Mogensen Type: SL 2066 Machine No.: D 5474 Year of manufacture: 2001 Width: 2,000 mm Decks: 6 Includes 2 counterweight drives, drive shafts, 15 kW / 970 rpm electric motor, and springs. The sizer is in good operating condition and can be sandblasted and painted upon request.

Tilstand: ny, Byggeår: 2025, Funksjonalitet: fullt funksjonell, vandring X-akse: 1 016 mm, vandring Y-aksen: 508 mm, bevegelsesavstand Z-akse: 508 mm, hurtigmating X-akse: 24 m/min, hurtig tverrslag Y-akse: 24 m/min, hurtigmating Z-akse: 24 m/min, nominell (tilsynelatende) effekt: 22 kVA, dreiemoment: 102 Nm, kontrollerprodusent: Milltronics, kontrollermodell: CNC 9000, total høyde: 2 565 mm, total lengde: 3 722 mm, total bredde: 3 210 mm, bordbredde: 508 mm, bordlengde: 1 168 mm, bordbelastning: 1 710 kg, totalvekt: 4 125 kg, spindelhastighet (maks.): 10 000 o/min, avstand fra bordets sentrum til spindelnesen: 610 mm, spindelmotoreffekt: 15 000 W, spindelnese: Big Plus ISO 40, antall spindler: 1, antall plasser i verktøymagasinet: 20, verktøylengde: 240 mm, verktøydiameter: 80 mm, verktøyvekt: 7 000 g, inngangsspenning: 230 V, type innstrømsstrøm: trefaset, Utstyr: dokumentasjon / manual, rotasjonshastighet trinnløst variabel, spontransportør, => Machine price within Germany. => Machine available from stock. Transport from warehouse in the Netherlands or Czech Republic is to be arranged by the buyer. Additional machine sizes available. Includes screw-type chip conveyor and all software options such as: • Milltronics 9000-DGI CNC, including all options for desktop, programming, and milling strategies • 15" color LCD touchscreen monitor • 120 GB solid-state drive • 4 GB RAM • Two USB ports • Productivity software: ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: ICT (internal coolant supply) through spindle, 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling through spindle ICT preparation for Milltronics ICT system allows easy on-site installation of the Milltronics ICT system ICT preparation for ChipBlaster® ICT system allows easy on-site installation of the ChipBlaster® ICT system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis model TDE-MV-200, complete with controller and motors LCM 4th axis model TDE-MV-250, complete with controller and motors 5AX LCM-BSC-200, complete with controller, motors, and cables 4th axis electronics package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electronics package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electronics package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electronics package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm 3-jaw chuck with adapter flange (for Milltronics M-170 and M-200 rotary tables only) 230 mm 3-jaw chuck with adapter flange (for Milltronics M-250 rotary table only) Tsudakoma 4th axis model RNE-160R with motor (4th axis electronics package must be ordered additionally) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis model RNE-200R with motor (4th axis electronics package must be ordered additionally) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 touch probe with optical signal transmission and macros OTS tool setter with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Kwsdpfx Afex Akgworet Hinged belt chip conveyor External keyboard (uses 1 USB port) Electronic spindle cooler Additional work light Additional "M" functions block with 4 pcs Programming manual in paper format Machine manual in paper format

Tilstand: som ny (utstillingsmaskin), HD-generator for high-definition plasma cutting. New, never used, from warehouse stock. Immediately available, subject to prior sale. Special offer. Kwedpfxsg Tcufs Afrjt

Tilstand: ny, Byggeår: 2024, SCHORR belted dumper with tipping skip, hydraulic tipping and ride-on platform, 500kg load capacity, 9.2 HP engine -- Self-propelled and powerful rubber track drive -- Large and high-quality tipping skip -- Foldable ride-on platform as standard -- Width of only 680mm -- Excellent price-performance ratio -- NEW & AVAILABLE IMMEDIATELY! The SCHORR tracked dumper RR500DHKB is equipped with hydraulic tipping and has a payload capacity of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke petrol engine. Thanks to its slim construction (680mm), the mini dumper can also pass through narrow paths and doorways, making it an extremely flexible means of transport. The robust rubber track drive allows you to easily handle rough terrain, gradients and kerbs. The rubber tracks provide a secure footing in any work area. Raising and lowering the tipping skip is effortless even when fully loaded, thanks to the hydraulic system. With a sturdy skip made from thick sheet steel and removable side panels, the loading area can be enlarged as needed, allowing you to transport items such as Euro pallets or firewood. SCHORR Mini Dumper RR500DHKB - Highlights at a glance: -- Self-propelled and powerful rubber tracked drive -- Large, high-quality tipping skip -- Foldable ride-on platform included as standard -- Removable side panels allow for an enlarged loading area Technical data: Payload: 500kg Weight: 284kg Tipping mechanism: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Recoil starter Length: 950mm Width: 680mm Height: 465mm Track width: 180mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable skip Packaging: Plywood crate Packing size: 167x77x113cm Our mini dumper is extremely manoeuvrable and is often used on construction sites, in agriculture and forestry, and in landscaping or for renovation work. Especially when combined with one of our mini excavators, the tracked dumper is a worthwhile investment. Excavated material can be easily transported to containers or similar with the mini dumper. Of course, we have all spare parts in stock at all times and can deliver them quickly should you ever encounter an issue. If you require technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Whether you want the mini dumper delivered or prefer to collect it from us in 48465 Schüttorf, we have the right solution for you. Please feel free to contact us. To make collections and viewings as convenient as possible, please note that these are only possible by prior telephone appointment. Kwedpfx Aomv Eu Rofret Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various possibilities. We look forward to your enquiry! We at SCHORR are happy to answer any remaining questions you have about our mini dumpers. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Tilstand: ny, Byggeår: 2024, SCHORR belted dumper with hydraulic tipping and ride-on platform – 500kg load capacity, 9.2 HP engine -- Self-propelled and powerful tracked drive -- Large, high-quality tipping skip -- Foldable operator platform fitted as standard -- Only 680mm wide -- Excellent value for money -- NEW & IMMEDIATELY AVAILABLE! The SCHORR tracked dumper RR500DHKA features a hydraulic tipping system and offers a payload capacity of 500kg, powered by a robust 9.2 HP single-cylinder 4-stroke petrol engine. Thanks to its slim design (680mm width), this mini dumper can pass through tight pathways and narrow doorways, making it an extremely versatile transport solution. With its strong track drive, the mini dumper can easily handle rough terrain, slopes, and curbs. The rubber tracks provide a secure foothold in any working environment. The skip can be lifted and lowered effortlessly, even when fully loaded, thanks to the hydraulic tipping system. Another advantage of this mini dumper is its extra-large hydraulic oil tank with oil filter, which ensures a long service life and minimizes maintenance requirements. The robust skip, made from thick steel and featuring a straight outlet for fast and easy discharge, makes this dumper a must-have for anyone needing to transport heavy loads. Tipping on slight inclines is no problem at all. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort and makes the mini dumper indispensable for all those who value efficiency and performance. SCHORR Mini Dumper – Advantages at a glance: -- Self-propelled, powerful tracked drive -- Large, high-quality tipping skip -- Standard foldable operator platform Technical Data: Payload: 500kg Weight: 280kg Tipping system: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Recoil starter Length: 950mm Width: 680mm Height: 465mm Track size: 180mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable skip Type of packaging: Plywood crate Package size: 167x77x113cm Our mini dumper is extremely maneuverable and widely used on construction sites, in agriculture and forestry, landscaping, and during renovation works. Naturally, we keep all spare parts in stock and can deliver them promptly in case of any issues. Should you require technical support, we have the necessary expertise and can carry out repairs in our in-house workshop. To make pick-ups and viewings as convenient as possible, please note that these are only available by prior appointment over the phone. Kwedpfemv Evrjx Afrot Would you prefer to finance or lease this equipment? No problem! We also offer attractive finance and leasing options. Just contact us, and we will advise you on the various possibilities. We look forward to your enquiry! If you have further questions about our mini dumpers, the SCHORR team is happy to help. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with advice.

Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2025, driftstimer: 19 h, SCHORR crawler dumper with skip, hydraulic tipping, and ride-on platform - 500 kg payload, 9.2 HP engine Kodpfowh I Avex Afrewt Powerful mini dumper in excellent condition for sale! The machine is in very well-maintained condition and ready for immediate use. Condition: Used, very good Operating hours: 19h Year of manufacture: 2025 -- Self-propelled with robust crawler drive -- Large and high-quality tipping skip -- Foldable ride-on platform as standard -- Only 680 mm wide -- Excellent price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR crawler dumper RR500DHKB features a hydraulic tipping mechanism and offers a payload of 500 kg along with a powerful 9.2 HP single-cylinder 4-stroke petrol engine. Its slim design (680 mm) allows the mini dumper to pass through narrow paths and doorways, making it an extremely flexible transport solution. Thanks to the strong track drive, the mini dumper easily tackles rough terrain, inclines, and kerbs. The rubber tracks ensure a safe footing in any working environment. Lifting and lowering the skip is effortless, even when fully loaded. The robust skip, made from thick sheet metal and with removable side panels, allows the loading area to be expanded for transporting items such as Euro pallets or firewood. SCHORR Mini Dumper RR500DHKB – At a glance: -- Self-propelled with powerful crawler drive -- Large, high-quality tipping skip -- Foldable ride-on platform as standard -- Removable side panels for expanding the loading area Technical data: Payload: 500 kg Weight: 284 kg Tipping mechanism: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Recoil starter Length: 950 mm Width: 680 mm Height: 465 mm Track width: 180 mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable skip Packing type: Plywood crate Packing dimensions: 167x77x113 cm Our mini dumper is highly maneuverable and frequently used on construction sites, in agriculture and forestry, landscaping, and for renovation work. Especially in combination with one of our mini excavators, the crawler dumper is a worthwhile investment. Excavated material can be easily transported to a container or similar by the dumper. Naturally, we always have all spare parts in stock and can deliver quickly should any issues arise. If you require technical assistance, we have the necessary expertise and can carry out repairs in our in-house workshop. Whether you prefer delivery or wish to collect the mini dumper from our site in 48465 Schüttorf, we have the right solution for you. Feel free to contact us. To make collections and inspections as convenient as possible for you, please note that these are only possible by prior telephone appointment. We at SCHORR are happy to answer any further questions regarding our mini dumpers. You can reach our experienced team by phone or email. We look forward to hearing from you and assisting with your enquiry.

Tilstand: ny, Byggeår: 2024, Bore capacity in steel (diameter): 25 mm Throat depth: 255 mm Drilling stroke: 135 mm Spindle speeds: 8, from 105-2900 rpm Table size: 500 x 350 mm Column diameter: 100 mm Spindle taper: MT 3 Total power requirement: 0.65 / 0.9 kW Machine weight approx. 190 kg Required space approx. 0.5 x 0.5 x 1.7 m Unused demonstration machine available at a special price: Gear-driven machine, 2-speed right-/left-hand rotation, height-adjustable drill head, design principle “Arboga - Sweden”, maintenance-free gearbox with helical gears, drill head and table can be rotated 360 degrees around the column, chip guard with electric switch, drill depth display. This is a demonstration unit offered at a special price, therefore we sell without any warranty. Kwodpfxewqr Ibo Afrjt STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Tilstand: nesten som ny (brukt), Byggeår: 2005, Funksjonalitet: fullt funksjonell, Vi tilbyr et parti på 23 identiske, ubrukte (New Old Stock) Festo pneumatiske sylindre, modell DNG-160-100-PPV-A-S2. Ideelle for automatisering, tung klemkraft, pressing eller som vedlikeholdslager. Detaljer: Antall: 23 stk Stempeldiameter: 160 mm Slaglengde: 100 mm Maks trykk: 10 bar Justerbar pneumatisk demping (PPV) Samsvar: ISO 15552 / VDMA Tilstand: Ubrukt, lagret med stempelstangbeskyttelse Kodowxfrpopfx Afrewt Pris: Enkeltstykk: €410 3–5 stk: €390/stk 10+ stk: €370/stk Hele partiet: €340/stk

Tilstand: brukt, Plate thickness: 4 mm Max. cutting thickness (at 60 kg/mm²): 3 mm Blade length: 90 mm Weight: approx. 30 kg Space requirement: approx. 0.45 x 0.30 x 0.2 m Notching unit for installation under a hydraulic or eccentric press. The cutting thickness values are conservatively estimated. Ksdpsu I Et Rsfx Afrewt STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Tilstand: brukt, driftstimer: 172 h, totalvekt: 1 500 kg, drivstofftype: elektrisk, HAKO floor cleaning machine / scrubber-dryer Model: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / EXCELLENT condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see image – visually EXCELLENT Hour meter reading: "172" 4 brushes Electric drive Battery: Full power, 36 V DC / 5.5 kW Weight: 1,500 kg Original price approx. €39,900 Price is for collection from warehouse: 47441 Moers Kwedpfxjwfflvj Afrjt Various cleaning and scrubber-dryer machines in stock. We sell as shown in the photos. Viewing is expressly encouraged. General information: We offer various items, described as accurately as possible, with detailed photos. No further information can be provided. Inspections are possible Tuesdays and Thursdays between 9 a.m. and 4 p.m. by prior telephone arrangement. If needed, collection is possible immediately. Due to time constraints, we can only respond to enquiries if you provide a phone number with your request. Unless explicitly described otherwise, this offer concerns USED EQUIPMENT. Goods are sold as pictured. All offers ex stock 47441 Moers. If shipping is required, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance) All dimensions are approximate.

Byggeår: 2016, Tilstand: god (brukt), Thermocontainer Thermo Cabinet Thermo Tray Blanco Year of manufacture: 2016 – visually in very good condition We are offering a used tray transport trolley / plate warming cabinet / food warming cabinet: 2 folding doors – see photos Manufacturer: BLANCO Year of manufacture: approx. 2016 / Various cabinets in stock Model: TTW 2x12 Weight: approx. 85 kg total Tray slots: 2x12 Large caster wheels, 2 of which are lockable (simple foot operation) Also ideal for use as a workshop cabinet, suitable for outdoor use New price from other manufacturers seen at €4,200 Dimensions: Height: 178 cm Width: 100 cm Kjdpfxjiwxygs Afrjwt Depth: 70 cm Various transport trolleys and workshop cabinets in stock Temperature is well maintained thanks to thermal insulation walls Collection from warehouse 47441 Moers Viewing is expressly encouraged. More equipment available in stock General information: We offer items from various company liquidations, described to the best of our abilities and provided with representative photos. Further details about the item cannot be given. We offer viewing by appointment on Tuesday and Thursday between 9am and 4pm by prior telephone arrangement. If required, the item can be taken immediately. Unless otherwise stated, this offer is for used goods (from business closures). Items have been visually inspected and are in acceptable condition. Please refer to the photos. Functional test performed – result: OK. All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. All dimensions are approximate. Photos for reference.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, total lengde: 600 mm, total bredde: 400 mm, total høyde: 320 mm, totalvekt: 3 kg, Plastic bins, Euro standard 600x400x320 mm – Silverline – Sold as is ISC Recycle offers a large stock of Silverline industrial plastic bins – Euro standard 600x400 mm, height 320 mm. Robust and reliable, these bins are ideal for internal logistics, storage, transportation, or automated systems (conveyors, flow racks, stacker cranes, etc.). 🔹 Technical specifications: Brand: Silverline Dimensions: 600 x 400 x 320 mm Volume: 60 litres Material: Polypropylene (PP) – robust and impact resistant Reinforced base and solid sides Thermal resistance: from -40°C to +90°C 100% recyclable Sold as-is (inspected used bins, in very good condition) 🔹 Available options: Bin dividers available: Small dividers: €0.20 / each Large dividers: €0.50 / each Bulk sales possible by pallet (24 bins per pallet) Total stock: 3,000+ units Kwjdpfx Aexqdx Asfrot 🔹 Quantity-based pricing: €6 net / unit – single unit €5.50 net / unit – from 1,000 units €5 net / unit – from 2,000 units Delivery possible or collection on site

Tilstand: verkstedoverhalt (brukt), Funksjonalitet: fullt funksjonell, Hohner heftestift 48/5S for standard stapling suitable for Duplo DBM-400, DBM-300, DBM-250, DBM-200 Kwedowi Tuaopfx Afrjt The stapling head has been factory overhauled, and maintenance was performed according to the manufacturer's specifications. A 6-month warranty is provided. The stapling head is available from stock in Barsbüttel, near Hamburg. Optional shipping within Germany can be negotiated.

Byggeår: 2001, Tilstand: svært god (brukt), maskin-/kjøretøynummer: 20020232 EG 1 Brücke, DEMAG KBK crane system crane runway with dimensions approx. 31 x 6 m (6 m bridge – double girder crane) Lifting capacity / rated load 1000 kg – 1 ton Technical data of the unit: Crane runway made of Demag KBK2 rails with integrated power supply System is delivered complete: KBK rails, rail connectors, travel trolleys, end plates, cable carrier, brackets/hangers, etc. Kedpfsty Tcqex Afrewt Incl. Demag DK5 – 1000 kg electric chain hoist – lifting height approx. 4 m Crane is dismantled and available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping via freight forwarder or pickup by prior arrangement only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Lifting capacity 125 kg – 1600 kg. Please send a non-binding inquiry for your crane runway with required load capacity and dimensions.

Byggeår: 1985, Tilstand: svært god (brukt), maskin-/kjøretøynummer: 20020298 EG, DEMAG KBK crane system overhead crane runway with dimensions approx. 10.5x9m (9m bridge – double girder crane) Payload / Lifting capacity: 500 KG – 0.5 t Technical Data of the system: Crane runway made from Demag KBK2 rails with integrated power supply The system is delivered complete: KBK rails, rail connectors, carriages, end plates, cable carrier, brackets/hangers, etc. Including Demag PK2 500KG electric chain hoist – lifting height approx. 5m Crane is dismantled and immediately available Used condition, see pictures Kjdpfoty S T Uox Afrowt Item location is 75053 Gondelsheim Shipping via freight forwarding or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems also available. Payload 125KG – 1600KG Please feel free to inquire about your crane runway with required lifting capacity and dimensions.

Tilstand: svært god (brukt), Holder for reaming mandrel (2845) MT 3 / 16 Diameter of taper for reamer: 16 mm Kodpjmk E S Sofx Afrowt Unused, from stock clearance Other sizes available on request

Tilstand: svært god (brukt), Chuck Trepads chucks Manufacturer: Forkhardt Type: F 315 Diameter: 315 mm with short taper mount KK 11 Taper diameter: 196.88 mm 6 studs M20 Bolt circle diameter: 235 mm Through-hole: 86 mm Stock number (28597) Kodjv Ava Hepfx Afrswt