Kjøp brukt Stocker (179)

Tilstand: svært god (brukt), Rundmagnet/permanent Diameter: 200 mm Height: 93 mm Clamping surface diameter: 210 mm Weight: 16.5 kg Hedpfowf Hgusx Acvonu Stock number: (28622)

Tilstand: nesten som ny (brukt), maskin-/kjøretøynummer: ML170mm 1554142W, Dr. Johannes Heidenhain glass scale ML170mm 1554142W LS903 IdNo. 20908102 Length Measuring Device Scale Manufacturer: Heidenhain Type: ML170mm 1554142W IdNo. 20908102 For further technical data, please refer to the nameplate in the attached photos. Otherwise, please note the following information and contact us if necessary. Thank you. • Condition: Please refer to the photos. The item was held in stock as a spare part, taken from the spare parts inventory or dismantled from an existing system. • Additional information: Please note that the item may have already been in use. Therefore, scratches, stains, discolorations or remaining cable assemblies may be present. • The item is being offered as used, without any guarantee or warranty. • Some items have been dismantled from functioning production systems, or are unused surplus stock. • Items have been in storage for several years and are explicitly offered as "used goods", even if they were hardly used or only kept as spares. • Deviations from technical data or mistakes in the product description may occur and are subject to change. • Condition/packaging as shown in the photos or as individually agreed. • For further questions or requests for additional photos, please contact us. • For international shipping, please inquire as shipping costs may vary. • For technical or other questions, feel free to contact us at any time. • Appointments for inspection or self-collection are possible by arrangement. If you have any questions or wish to arrange a viewing, please get in touch. Hsdpfevakg Nox Acvonu Thank you for your interest.

Tilstand: brukt, Byggeår: 2001, Transnorm Spiral Helix Belt Curve Conveyor Right GKF 90°-775-600 IR500, 210mm incline RA2009 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Tapered drums and a specially developed belt guide system ensure the smoothest possible operation. Technical Data: Designation: Belt Curve Conveyor TS 1600-105 Hnedpfx Aek Abttecvsu Frame width (NB): 775 mm Belt width (GuB): 600 mm Overall height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 90° Incline: 210mm rising / 90° = 840mm / 360° height difference Support feet: optionally available Conveying speed (v m/s): please inquire Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: defective, replacement belt in stock, at extra charge Year of manufacture: 2001 Optionally available: Supports Side guides single-sided and double-sided Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or e-mail. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics.

Tilstand: god (brukt), Byggeår: 2013, ca. 200 sections of wide-span shelving / shelving racks, SSI Schäfer, with steel shelves – used – : Price per section ex-location: Now only €99 instead of €225 (net), dismantled, packaged, and loaded! Additional single cross beams: €5 (net) / piece Price per section without steel shelves ex-location: €225 (net), dismantled, packaged, and loaded! Additional single cross beams: €5 (net) / piece Manufacturer: SSI-Schäfer Type: converted carton flow rack Year of manufacture: 2013 Each section with 3 shelf levels! Frame width: approx. 6 cm Frame depth: approx. 85 cm Beam height: approx. 6 cm Steel shelf dimensions: Depth: approx. 76.5 cm, Width: approx. 30 cm, Height: approx. 2 cm, Stock: approx. 130 pcs Depth: approx. 76.5 cm, Width: approx. 20 cm, Height: approx. 2 cm, Stock: approx. 76 pcs Bracing beam: Height approx. 6.5 cm Available frame heights: Rack height: approx. 2.20 m Depth: 85 cm Number of frames: 288 pcs Rack height: approx. 2.50 m Depth: 85 cm Number of frames: approx. 145 pcs Available bay widths: Hnjdpfx Acevxh Arevju Clear bay width: 1.80 m Beam with upstand for steel shelves: 180 cm – 58 pcs Beam without upstand (as used in pallet racking – also suitable for placing chipboard panels) 180 cm – 344 pcs Clear bay width: approx. 2.20 m Beam with upstand for steel shelves: 220 cm – 7 pcs Beam without upstand (as used in pallet racking – also suitable for placing chipboard panels) 220 cm – 237 pcs Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Tilstand: brukt, Byggeår: 2000, Stock A-14 V567A/1650P er en høyhastighets lamineringsmaskin utviklet spesielt for emballasjeindustrien. Den benytter avansert teknologi for effektiv laminering av ulike materialer, noe som gir forbedret holdbarhet og beskyttelse av emballasjeproduktene. Format: 1640 x 1640 mm Utstyr: Mater: Kantinnmating (MIRUS) Arkinnmating via transportkjeder Pressehastighet: 3 000 sykluser/t Styring: Siemens PLC-styring / Micro Control System Hsdswcqwxjpfx Acvonu Limstasjon Lamineringsstasjon Tekniske detaljer Maks. størrelse: 1640 x 1640 mm Min. størrelse: 500 x 500 mm Arkvekt: Kartong 100 – 800 g/kvm Innmatingshøyde: 1 400 / 1 800 mm Bærekartong: Enkeltsidig bølgepapp, E-/B- og F-bølge, dobbeltsidig bølgepapp opptil 7 mm tykkelse, kartong fra 0,5 mm tykkelse

Tilstand: god (brukt), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: a Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This Swiss-made precision machine is ideal for small gear production, toolrooms, and manufacturers seeking reliable, high-precision gear cutting capabilities. Mikron is renowned for its robust construction and reliable performance in gear hobbing applications, making it an excellent solution for cutting spur gears, helical gears, and splines with consistent precision. Condition Used Stock number 968859 State Good Maximum diameter 100mm (4") Hjdpfx Aoxlabcjcvsnu Maximum length 100mm (4") Number of teeth 6-400 Maximum pitch in steel 15 D.P. 12 table rotations Geometrically calibrated between 200 and 2,400 rpm Feed Horizontal or plunge cut Main motor 1.5 HP Coolant pump motor 0.1 HP Hydraulic system motor 0.1 HP Dimensions 1120x1120x1680mm Machine weight 500kg

Tilstand: svært god (brukt), Digital display Manufacturer: Heidenhain Type: Positip 850 Stock number: 28595 The display is used and has been tested. Hsdjvx Nkdopfx Acvenu Please note: The uneven coloration is due to poor photography.

Tilstand: svært god (brukt), Byggeår: 2007, Funksjonalitet: fullt funksjonell, slipelengde: 3 200 mm, total lengde: 9 500 mm, Favretto MD 300 Universal Flat Grinding Machine CNC Manufacturer: Favretto Model: MD 300 Control unit: DTG Plus / Siemens 840D Year of manufacture: 10/2006 Table size: 3,220 mm Grinding travel (X/Y/Z): 3,200 x 900 x 725 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic chuck) Grinding wheel dimensions: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Hnedpfjxluh Rjx Acvju Grinding spindle motor power: 22 kW Machine weight approx.: 17,500 kg Machine dimensions (L x W x H): 9,400 x 3,550 x 3,000 mm Accessories: - Magnetic table - Coolant system with paper filter - Various grinding wheels - Documentation Inspection under power can be arranged at short notice. For further questions, please contact us. Price: ex stock, plus VAT Condition: good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice

Byggeår: 2010, Tilstand: svært god (brukt), maskin-/kjøretøynummer: RESHGFW, DEMAG KBK Crane System Crane Runway – various cranes with different dimensions in stock – please inquire! Load Capacity / Lifting Capacity 125 KG – 1000 KG – Please inquire Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with elevated travel mechanism – crane girder is positioned between both running rails for maximum lifting height System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/suspenders, etc. incl. chain hoist Crane is dismantled and immediately available Several cranes available, pictures are for illustration purposes Very good condition, see pictures Item location: 75053 Gondelsheim Hnedpfx Ajrwi Sljcvju Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are standard stock items! Other KBK systems also in stock. Load capacity 125 KG – 1600 KG Please inquire about your crane runway with required load capacity and dimensions without obligation.

Tilstand: ny, Byggeår: 2025, Netting bag packaging machine. Suitable for PE netting bags in pillow or gusseted form for fresh vegetables and fruits, e.g.: potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwi, etc. Complete stainless steel version, PLC control with touchscreen. Registration mark sensor. Suitable films: PE net, net-film laminate, etc. Bag types: flat bags, stand-up pouches with/without carrying handle. - Specifications: max. film width: 620mm; bag length: 100-380mm; bag width: 110-300mm; max. idle machine cycle rate: 20 cycles/minute; compressed air: 0.36m³/6bar; power: 220V, 3kW. The machine/system is also available in various versions for different packaging sizes and packaging speeds. Hnsdpfxsv Nm Alo Acveu Please note that our new prices are often lower than the typical prices for used units. Feel free to contact us and let us know your specific packaging requirements. - Normally, we always have 30-50 different new machines available ex-stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from around 3 weeks. - All machines come with a full warranty.

Tilstand: nesten som ny (brukt), Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: D32070, Byggeår: 2021, driftstimer: 41 h, total lengde: 864 mm, total høyde: 1 626 mm, total bredde: 711 mm, type innstrømsstrøm: Likestrøm, totalvekt: 227 kg, inngangsspenning: 220 V, Utstyr: CE-merking, À vendre : Imprimante FDM Stratasys F370 (Série F123) + SCA 3600, idéale pour une production fiable et conviviale en environnement de bureau de pièces fonctionnelles, outillages et prototypes techniques. Vendue avec un important lot de consommables neufs et scellés, têtes d’impression neuves, ainsi qu’un bac de retrait du support Stratasys SCA 3600, permettant un démarrage immédiat et une autonomie prolongée. Caractéristiques principales Technologie : FDM avec support soluble QSR Volume de fabrication : env. 355 × 254 × 355 mm (14 × 10 × 14 in) Matériaux typiques (selon la tête) : PLA, ABS, ASA, élastomères, ABS-CF10 Compatible avec l’élimination des supports solubles (NaOH/QSR) Inclus avec la machine : Chimie / Support Hnsdpfoxk Tbgjx Acvsu 7× boîtes de soude caustique Stratasys (NaOH), réf. 300-00600 1× bobine QSR support soluble 1× bac de retrait du support Stratasys SCA 3600 Bobines de matériaux (toutes neuves) 7× PLA translucide 1× PLA bleu clair 1× ASA jaune 1× ABS noir 1× ABS jaune 1× ABS ivoire Plateaux d’impression 6× cartons de plateaux standards 1× carton de plateau haute température Têtes d’impression (toutes neuves) 7× têtes de refroidissement PLA 4× têtes d’extrusion PLA 4× têtes support / modèle 1× tête élastomères 1× tête ABS-CF10 Accessoires inclus Accessoires et câbles d'origine [Manuels d’utilisation / kit de maintenance / caisse de transport—si applicable] Essai d’impression avant enlèvement possible Logistique Inspection : sur rendez-vous Expédition : transport sur palette possible à la charge de l’acheteur ou enlèvement sur place Paiement : Virement bancaire. Facture délivrée. Pourquoi cette machine ? F370 entretenue, en excellent état, avec un stock rare et complet de plateaux, têtes et matériaux—du PLA à l’ABS-CF10 ainsi que les élastomères—et équipée d’un bac SCA 3600 pour un retrait des supports solubles efficace. Réduisez les arrêts et les délais d’approvisionnement en consommables dès la première utilisation.

Tilstand: god (brukt), Byggeår: 2001, Funksjonalitet: fullt funksjonell, Worm Gear Grinding Machine Grinding Machine Gear Gleason Pfauter G320 CNC + Promot Automation – Gear grinding machine Manufacturer: Gleason Pfauter G320 + with Promot Automation Handling Unit Type: G 320 Control unit: Siemens 840 Incl. operator panel Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z”: 200mm Horizontal slide stroke “X”: 230mm Tangential slide stroke (SHIFTING) “Y”: 135mm Swivel angle clamping head “A”: +-45° Quill stroke – tailstock centre: 125mm tangential slide stroke – dressing “V”: 180mm radial slide stroke – dressing “U”: 110mm Grinding wheel speed during operation: 3000 rpm max - stepless Linear axis feed rate: 10,000 mm/min Max. table rotary speed: 240 RPM Table resolution: 0.001° Feed rates: stepless Operation feeds: stepless Grinding wheel dimensions Min/Max diameter: 270/350mm Width: 104mm max Bore: 160mm Machine weight: 11,500kg Accessories: as per pictures +Promot Automation +Conveyor belt +Cooling band system +Hydraulic unit Hnedpfxju Sqgqj Acvsu Required machine space approx. (W x D x H): 3.7m x 2.4m x 2.75m Required space for Promot Automation approx. (W x D x H): 4.5m x 1.6m x 4.0m Full documentation available. Functionality and machine features: Gear grinding machine with 8 numerically controlled axes for machining gears with straight and helical teeth manufacturable by generating, including dressable worm profile grinding wheel. Linear and rotary main axes are hydrostatically guided. High-performance machine for finishing cylindrical gears with straight or helical involute gearing. Inspection under power can be arranged at short notice. For further questions, please do not hesitate to contact us. Price: ex stock here plus VAT. Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Subject to prior sale and errors. We kindly ask for your order. Further machines and systems available ex stock – please enquire. We look forward to hearing from you.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products into pillow bags with longitudinal seams. The flow pack packaging machine is suitable for packing single or multiple, dry, uniform or non-uniform products. A special feeding system is installed ahead of the flow wrapper. Sorting and feeding the products in line to the carriers (infeed table flow wrapper) is handled by the six servo-driven side belts. This eliminates the need for manual placement of each individual product, which significantly boosts production efficiency and contributes considerably to the flow wrapper's economic benefits. AMTEC’s flow pack packaging machine is optimally matched to the bag length regarding the rotating knives and their diameter, ensuring speed optimization as a result. — Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (70-200) x W (15-60) x H (5-30) mm; Number of rotating knives: 2; Max. machine cycle rate (idle): 400 cycles/min; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3500 kg. Hnsdpfx Acev Nli Devsu Please note that our new prices frequently undercut typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. — We usually have 30–50 different new machines available from stock for immediate delivery. Lead times for custom-manufactured machines are also very short, starting from around 3 weeks. — All machines come with full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seams. The flow pack packaging machine is suitable for packaging single or multiple, dry, uniform or non-uniform products. A special infeed system is positioned upstream of the flow wrapper. The sorting and feeding of the products in line to the lug conveyor (infeed table of the flow wrapper) is handled by the six side belts driven by servo motors. This eliminates the need for manual individual feeding, providing significant production advantages and contributing greatly to the efficiency of the flow wrapper. AMTEC’s flow pack packaging machine is perfectly matched to the bag length in terms of the rotating knives and their diameter, resulting in optimized speed. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15–60) x H (5–30) mm; Bag dimensions: L (48–60) x W (15–60) x H (5–30) mm; Number of rotating knives: 5 pieces; Maximum machine cycle rate in idle: 1,000 cycles/minute; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924mm; Weight: 3,500kg. Hjdpjv Nlkzsfx Acvenu Please note that our new prices are often below the usual used equipment prices. Feel free to contact us and let us know your packaging requirements. – Typically, 30–50 different new machines are always available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting at around 3 weeks. – All machines come with a full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seam. The flowpack packaging machine is suitable for packaging single or multiple, dry, uniform or non-uniform products. A special feeding system is installed upstream of the flow wrapper. Sorting and feeding of the products in sequence to the carriers (infeed table of the flow wrapper) is handled by the six side conveyor belts driven by servo motors. As a result, products do not need to be placed individually by hand, which brings a considerable production advantage and significantly contributes to the overall efficiency of the flow wrapper. AMTEC's flowpack packaging machine is perfectly matched to the bag length in terms of the rotating knives and their diameter, optimizing speed as a result. – Specifications: Suitable product dimensions: L(depends on bag length)xW(15-60)xH(5-30)mm; Bag dimensions: L(48-60)xW(15-60)xH(5-30)mm; Number of rotating knives: 6; Max. machine cycle rate (idle): 1200 cycles/minute; Film type: BOPP/OPP (transparent, printed or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734xW1110xH1924mm; Weight: 3500kg. Hjdsv Nllfepfx Acvonu Please note that our new prices are often lower than typical used prices. Simply contact us with your packaging requirements. – We usually have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are available with a full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in longitudinal seam flow packs. The flow pack packaging machine is suitable for packaging single or multiple, dry, uniform, or non-uniform products. A special infeed system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the pick-up devices (infeed table of the flow wrapper) is performed by the six side belts driven by servo motors. This means that the products do not need to be placed individually by hand, which provides a significant production advantage and contributes greatly to the efficiency of the flow wrapper. AMTEC’s flow pack packaging machine is perfectly adapted to the bag length regarding the rotating knives and their diameter, resulting in optimized speed. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (80-170) x W (15-60) x H (5-30) mm; Number of rotating knives: 3 units; Max. machine cycle rate (idle): 600 cycles/minute; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L 9734 x W 1110 x H 1924 mm; Weight: 3500 kg. Hodpfx Acsv Nlkhjvsnu Please note that our new prices are often below the typical used prices. Simply contact us and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in flow packs with longitudinal seams. The flow pack packaging machine is suitable for packaging individual or multiple dry, uniform or irregularly shaped products. A special feeding system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the carriers (infeed conveyor of the flow wrapper) is performed by six servo motor-driven side belts. This means that the products do not need to be inserted manually one by one, resulting in a significant production advantage and greatly contributing to the cost-effectiveness of the flow wrapper. AMTEC’s flow pack packaging machine is optimally matched to the bag length with respect to the rotary knives and their diameter, achieving optimized speed as a result. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15–60) x H (5–30) mm; bag dimensions: L (55–85) x W (15–60) x H (5–30) mm; number of rotary knives: 4 pieces; max. idle machine cycle rate: 800 cycles/minute; film types: BOPP/OPP (transparent, printed, or laminated); power: 380 V, 9.5 kW; machine dimensions: L 9734 x W 1110 x H 1924 mm; weight: 3500 kg. Please note that our new prices are often lower than the usual prices for used machines. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-made machines, our delivery times are also very short, starting from approx. 3 weeks. – All machines are available with full warranty. Hsdsv Nlknepfx Acvjnu

Tilstand: ny, Byggeår: 2025, Box-motion flowwrapper for wide and tall products. Top film feed. Servo-driven infeed, longitudinal and end sealing, PLC controlled, operation via touchscreen. "No product – no bag" function. - Specifications: max. machine cycle rate (idle): 40 cycles/minute; bag dimensions (not product dimensions): L(50–unlimited)×W(25–215)×H(10–90)mm, with W+H max. 215mm; suitable film width max.: 450mm; suitable film thickness: 30–75μm; number of blades: 1 piece; end sealing: oscillating (reciprocating); number of servo motors: 3 (infeed, longitudinal and end sealing); machine frame (standard version): painted steel; product-contact parts: stainless steel 304; power supply: 220V, single phase, 50Hz; rated power: 4kW; machine dimensions (L×W×H): 4200×1000×1300mm; weight: 960kg. Hodov Nlgcepfx Acvonu Please note that our new prices are often below standard used equipment prices. Feel free to inquire and let us know your packaging requirements. - Typically, 30–50 different new machines are immediately available from stock. Additionally, for custom-built machines we offer very short delivery times from approx. 3 weeks. - All machines come with full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products into pillow bags with longitudinal seams. The flowpack packaging machine is suitable for packaging single or multiple, dry, uniform or non-uniform products. A specialized feeding system is installed upstream of the Flow Wrapper. Sorting and single-line feeding of products to the carriers (infeed conveyor of the Flow Wrapper) is performed by the 6 servo-driven side belts. This eliminates the need for manual single placement of products, providing a significant production advantage and contributing considerably to the cost-effectiveness of the Flow Wrapper. AMTEC’s flowpack packaging machine is precisely optimized for bag length with regard to the rotating knives and their diameter, optimizing speed as a result. – Specifications: Suitable product dimensions: L(depending on bag length)xW(15-60)xH(5-30)mm; Bag dimensions: L(70-150)xW(15-60)xH(5-30)mm; Number of rotating knives: 3; Maximum machine cycle rate (idle): 600 cycles/minute; Film type: BOPP/OPP (transparent, printed or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734xW1110xH1924mm; Weight: 3,500kg Hedpfov Nlkbex Acvenu Please note that our new equipment prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seams. The flow pack packaging machine is suitable for packaging single or multiple dry, uniform or non-uniform products. A special feed system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the carriers (flow wrapper feed table) is handled by six side conveyor belts driven by servo motors. This eliminates the need to manually insert individual products, providing a significant production advantage and greatly contributing to the flow wrapper’s cost-effectiveness. AMTEC’s flow pack packaging machine is perfectly matched to the bag length in terms of rotating knives and their diameters, resulting in optimized speed. Hnjdpfev Nlk Ijx Acvsu – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30)mm; Bag dimensions: L (50-65) x W (15-60) x H (5-30)mm; Number of rotating knives: 5 pieces; Max. machine cycle rate in idle mode: 1000 cycles/minute; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924mm; Weight: 3500kg. Please note that our new prices are often below the standard used machine prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in longitudinally sealed tubular bags. The flowpack packaging machine is suitable for packing single or multiple, dry, uniform or irregularly shaped products. A special infeed system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the pusher lugs (Flow Wrapper infeed conveyor) is handled by six servo-driven side belts. This eliminates the need for manual placement of individual products, which provides a significant production advantage and contributes substantially to the efficiency of the flow wrapper. AMTEC’s flowpack packaging machine is perfectly matched to bag length with regard to the rotating knives and their diameter, resulting in optimized cutting speed. – Specifications: Suitable product dimensions: L(depending on bag length)xW(15-60)xH(5-30)mm; Bag dimensions: L(45-55)xW(15-60)xH(5-30)mm; Number of rotary knives: 6 units; Max. machine cycles in idle: 1200 cycles/minute; Film type: BOPP/OPP (transparent, printed or laminated); Power supply: 380V, 9.5kW; Machine dimensions: L9734xW1110xH1924mm; Weight: 3500kg. Please note that our new machine prices are often lower than typical used equipment prices. Simply contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines in stock and available for immediate delivery. For custom-built machines, our lead times are very short starting from just 3 weeks. – All machines are supplied with a full warranty. Hnjdpfx Ajv Nlk Uocvju

Byggeår: 2025, Tilstand: ny, Netting bag packaging machine. Suitable for PE netting bags in pillow or gusseted form for fresh vegetables and fruit, e.g.: potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Complete stainless steel version, PLC control with touchscreen. Print mark sensor. Suitable films: PE nets, net-film composites, etc. Bag types: flat bags, stand-up pouches with/without carrying handle. – Specifications: max. film width: 800mm; bag length: 100–480mm; bag width: 160–390mm; max. machine cycle rate (idle): 15 cycles/minute; compressed air: 0.40m³/6bar; power supply: 220V, 4kW. Hnodpfx Acjv Nm Arsvju The machine/system is also available in further versions for different packaging sizes and speeds. Please note that our prices for new machines are often below standard used machine prices. Feel free to contact us and let us know your packaging requirements. – We normally have 30–50 different new machines in stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from about 3 weeks. – All machines are available with full warranty.

Tilstand: ny, Byggeår: 2025, Full-automatic filling and capping machine for pharmaceutical liquids in vials. Suitable for aseptic filling and vaccines. The main unit doses safely and precisely using a peristaltic pump system and caps the vials with a lyophilization stopper. The 8-head capping unit also operates very quickly and precisely and is suitable for aluminum screw caps. Vials are guided individually, enabling safe and rapid filling and sealing. Also included is a collection table for finished products, which can be flexibly combined with the capping and main machines to form a complete line. All machines/modules are equipped with dust protection covers and a laminar flow hood. Hnedpfxev Nlcds Acvju – Specifications of the filling and sealing system: Number of filling stations: 4; Number of stopper capping heads: 1; Number of aluminum screw capping heads: 8; Filling volume: max. 30ml per vial; Idle speed: up to 150 bottles/min (with 4 filling stations and 5ml per vial); Accuracy: ± 1-3%; Suitable bottles: glass; Power: 3.35 kW; 220/380V; Line dimensions: depending on customer-specific configuration; Total weight: approx. 1215kg. The photo shows only the main machine. Photos of other modules are available on request. Please note that our new prices are often below typical used prices. Just ask and tell us about your packaging requirements. – We usually have 30–50 different new machines available from stock at any time. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. – All machines are available with full warranty.

Tilstand: ny, Byggeår: 2025, Flow wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seams. The flowpack packaging machine is suitable for packaging single or multiple, dry, uniform or irregularly shaped products. A special infeed system is installed upstream of the flow wrapper. Sorting and feeding the products in line with the carriers (infeed conveyor of the flow wrapper) is handled by six side-running belts driven by servomotors. This means the products do not need to be inserted manually, providing a significant production advantage and substantially contributing to the efficiency of the flow wrapper. AMTEC’s flowpack packaging machine is perfectly adapted to the bag length, with regard to the rotating knives and their diameter, resulting in optimal speed performance. – Specifications: Suitable product dimensions: L(depending on bag length)xW(15-60)xH(5-30)mm; Bag dimensions: L(90-220)xW(15-60)xH(5-30)mm; Number of rotary knives: 2; Max. machine cycles (idle): 400 cycles/minute; Film type: BOPP/OPP (transparent, printed or laminated); Power supply: 380V, 9.5kW; Machine dimensions: L9734xW1110xH1924mm; Weight: 3500kg. Please note that our new prices are often lower than common used machine prices. Feel free to inquire and let us know your packaging requirements. – As a rule, 30-50 different new machines are always available immediately from stock. In addition, we offer very short lead times for custom-built machines, starting from approx. 3 weeks. – All machines are available with a full warranty. Hnsdpfx Acsv Nli Reveu

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seam. The flow pack packaging machine is suitable for packing single or multiple, dry, uniform or non-uniform products. A special infeed system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the feeders (infeed table of the flow wrapper) is handled by six side conveyor belts driven by servomotors. This eliminates the need for individual manual product placement, providing a significant production advantage and contributing considerably to the cost-effectiveness of the flow wrapper. AMTEC’s flow pack packaging machine is perfectly aligned to the bag length with regard to the rotating knives and their diameter, optimizing speed as a result. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30)mm; Bag dimensions: L (60-100) x W (15-60) x H (5-30)mm; Number of rotary knives: 4 units; Max. machine cycle rate idle: 800 cycles/minute; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L 9734 x W 1110 x H 1924mm; Weight: 3500kg. Hnjdov Nlkuopfx Acvsu Please note that our new prices are often below typical used equipment prices. Feel free to send us an inquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always immediately available from stock. For custom-built machines, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty.