Kjøp brukt Stocker (207)

Tilstand: brukt, Byggeår: 1997, Wheel diameter – max. 215 mm Wheel width – 40.65 mm Module – max. Total power requirement: 20 kW Machine weight approx. 10 t GLEASON (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model: PHOENIX HG 200 Year of manufacture: 1997 Max. outer diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Tooth count range: 5 – 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51 – 190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0 – 30 rpm Workpiece spindle bore (tapered): 3 29/32 inch Dodst Hwxhjpfx Ab Heup Total drive power approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Features: • FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters • Large, sophisticated cooling system with filter unit, belt filter, etc. • Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle • Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel offers advantages in terms of heat generation and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be produced in high quality, consistent accuracy, at low cost and with short setup times. For further details refer to the brochure copy on our website. Condition: Very good – available for demonstration under power Delivery: Ex stock – as inspected Payment: Net, payable on receipt of invoice We look forward to your order. Other gear cutting machines in stock at all times. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0 – 30 rpm Workpiece spindle bore (tapered): 3 29/32 inch Total drive power approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Features: • FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters • Large, sophisticated cooling system with filter unit, belt filter, etc. • Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle • Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel...

Tilstand: brukt, Byggeår: 1977, Bore capacity in steel (diameter): 75 mm Arm reach: 1700 mm Workpiece height – max.: 370 – 1700 mm Total power requirement: 12 kW Machine weight approx.: 7000 kg Space required approx.: [please specify] CSEPEL (Hungary) Radial Drilling Machine Type: RFh 75 / 2 000 Year of manufacture: 1977 61158 --- Drilling capacity in steel / cast iron: 75 / 90 mm Tapping in steel/cast iron: 60 / 70 mm Dujdpfst Hw Uvox Ab Hop Max. arm outreach: approx. 1700 mm Max. workpiece height: 370 to 1700 mm Table clamping surface: 1100 x 2300 mm Intermediate table approx.: 600 x 1200 x 300 mm Table height above floor approx.: 600 mm Tool holder: MT 5 21 spindle speeds: 19 – 1,900 rpm 12 feed rates: 0.047 – 2 mm/rev Spindle stroke: 380 mm Vertical adjustment of arm: 950 mm Cross adjustment of drill slide: 1,500 mm Drill spindle drive approx.: 10 kW Total drive approx.: 12 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Dimensions (L x W x H): approx. 3,600 x 1,400 x 3,400 mm (height) Accessories / Special features: • Pre-selection switch for hydraulic speed adjustment • Mechanical feed pre-selection • Drilling with or without feed, or with manual fine feed • Drill slide adjustable by hand, vertical arm adjustment via electric motor, feed length/depth set by cams on quill vernier, with automatic depth cut-off and quill retraction • Electro-mechanical clamping of arm and drill head via push button • Coolant system built into sub-table • VOGEL central lubrication, intermediate table, etc. Condition: satisfactory to good – ready for demonstration under power, robust machine with high drilling performance Delivery: ex-stock – as inspected Payment: strictly net – on receipt of invoice

Tilstand: brukt, Bore diameter: 165 mm Stroke: 120 mm Center height: 100 mm Total power requirement: 1.5 kW Machine weight approx.: 1 t Manufacturer: SUNNEN (USA) Horizontal Automatic Honing Machine Model: MBC 1804 G Year of manufacture: 1K1-90075 Honing range – Ø - with measuring control: 1.5 – 51 mm - with automatic stroke: 1.5 – 95 mm - with manual stroke: 1.5 – 165 mm Max. workpiece length: approx. 400 mm Max. workpiece length with measuring control: 254 mm 12 spindle speeds: 200 – 2,500 rpm 5 stroke rates: 80 – 310 strokes/min Stroke length with automatic stroke: 6 – 120 mm Drive for honing spindle/stroke motor: 0.75 / 0.37 kW – 380 V – 50 Hz Total power approx.: 1.5 kW – 380 V – 50 Hz Duodpfew U U Iqsx Ab Hep Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shut-off when the target diameter is reached. • Electro-mechanical measuring control opposite the tool spindle, accepts a measurement probe to the target diameter, initiating automatic shut-off. • Infinitely adjustable expansion pressure • Foot switch for manual operation • Built-in honing oil supply • Operating manuals included. Unfortunately, no tool holders or other accessories available. Condition: Very good! Suitable for all honing tasks! For a video of the machine, please click here shortly. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Byggeår: 2002, Tilstand: brukt, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required space approx. m T I M E S A V E R S (Netherlands) Wide-belt Deburring and Finishing – Grinding Machine Type 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial no. 2313-03 _____ Grinding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed steplessly adjustable approx. 1 – 10 m/min Consists of the following assemblies: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the belt center, Belt feed motor approx. 3 kW, frequency controlled for stepless feed 1 – 10 m/min, Toggle switch for belt forward and reverse, digital display for belt speed and stepless adjustment of table height. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, Belt speed approx. 11-22 m/sec, with fine height adjustment and pneumatic oscillation in cross direction, various grinding belts included. 3.) Vertical grinding/deburring disc (disc brushing system) approx. Ø 1200 mm, consists of self-adhesive non-woven nylon in different qualities available, specifically for deburring and cleaning surfaces and for radiusing edges of workpieces. Also suitable for workpieces with different heights. Drive approx. 7.5 kW, disc oscillates motorically (2.2 kW) over the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Belt speed approx. 11 m/sec, with fine height adjustment and pneumatic oscillation in cross direction, various grinding belts included. Duodpfx Abet Hw Shj Hjp 5.) Wet execution = complete coolant system consisting of Belt filter unit with pump integrated in the machine base, rotary feedthrough at the top of the deburring disc spindle, water return via vacuum table, as well as a water mist separator installed above the machine, with blower approx. 5.3 kW. Side doors made of stainless V2A sheet metal. Oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position display and speed indicators. Joystick for feed belt and table adjustment, 3 x ammeters, etc., as well as pressure rollers for workpieces at front and rear, emergency stop Total drive approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – powered-up and ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Tilstand: brukt, Byggeår: 1985, Bore capacity in steel (diameter): 30 mm X-axis travel: 850 mm Y-axis travel: 435 mm Controller: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: (not specified) F E H L M A N N (Switzerland) CNC-controlled Precision Drilling and Milling Machine Model: PICOMAX 100 CNC – 2+ Am, Year of manufacture: 1985, Serial no.: 16 085109 X-axis (longitudinal): 850 mm Y-axis (cross): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle – table top: 140 / 690 mm Vertical (motorised) adjustment travel of drill head: 540 mm Drill spindle overhang approx.: 450 mm Spindle mount: SF 32 Drilling performance in steel: 30 mm Spindle stroke (quill), vertical max.: 210 mm Spindle speeds (stepless, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feeds, 6 automatic: 0.03/0.07 up to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW – 380 V – 50 Hz Weight approx.: 3,500 kg Accessories / Special equipment: • HEIDENHAIN CNC 2-axis path control Type TNC 150 with colour monitor, graphics, all standard subprograms and cycles, thread cutting cycles, hand control device or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via the control. • Drilling depth can be pre-set via a 12-position turret stop with digital display on the monitor. • The drill head itself can also be programmed for three preset positions via a height positioning device. • Precision coordinate table for X/Y CNC axes with hardened ball screw spindles • With quick-change tool system and various tool holders, several drill chucks, coolant system, etc. Condition: good to very good – ready for demonstration under power Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice Duodpfxst Hxa He Ab Hep

Tilstand: brukt, Byggeår: 1989, Plate width: 2500 mm Plate thickness: 12.5 mm Frame gap: mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Djdpet Hwr Isfx Ab Hjup BRÜCK Mechanical guillotine shear Type SCT 1225 SS Year of manufacture: 1989 ----- With adjustable cutting gap, hydraulic hold-down devices, and automatic backgauge adjustment for plate shearing, program and batch quantity input, plate transport and stacking device. Material width x plate thickness: 2500 x 12.5 mm Weight, approx.: 19,000 kg Drive: 40 kW Condition: good - ready for demonstration Delivery: ex stock - as inspected Payment: net - upon receipt of invoice

Tilstand: svært god (brukt), Industrial fans from chillers/water-cooled units: Trane, Carrier, Climaveneta, Bluebox, Clivet, Emicon, Other brands. Quantity: 50 units. Various diameters: 80-110 cm For more information and exact pricing, please contact us by phone. The listed price is net (excluding VAT). Comprehensive and professional consultancy regarding the selection of water-cooled units. Djdpskzkvwofx Ab Heup 12-month warranty included in the price, provided that commissioning is carried out by our technical service team. Shipping (priced individually) or personal collection possible at our central warehouse near Lublin. We have been active on the Polish market since 2016. Due to currency fluctuations and frequent changes in stock levels, please contact us for a final quotation and up-to-date availability. We also offer more water-cooled units—new-OUTLET and used. Over 150 devices available in our warehouse. Visit our website to explore our full offer.

Tilstand: klar til bruk (brukt), BAUMÜLLER BUH2-90/90-62-102-00 power converter device AC/DC Duedpfx Abetrlt Eo Hep good condition, tested Signs of storage, warehouse find as pictured Please refer to the images for further technical information. Scope of delivery as shown in the pictures. Auction price includes 19% VAT and invoice. Shipping/pick-up by arrangement Express shipping worldwide possible. No warranty / Guarantee Due to the new warranty law, we are obliged to point out the following: Even if the item is new or used, we sell the item as a spare part without warranty, as we often deal with used products from dismantling or insolvency stock and therefore cannot provide warranty within the legal framework. Business-to-business transactions are a way to exclude the legally prescribed guarantee or warranty. If you have any questions, please contact us. Ref. No. B6491

Tilstand: som ny (utstillingsmaskin), Fronius TPS 2700 Pulse Unit Ready to Weld ---> Scope of delivery: ➤Fronius TPS 2700 Power Source (270A TRANS PULS SYNERGIC) ➤Fronius Torch Package with Display on the Torch (arc, amperage jobs, etc. adjustable directly from the torch) ➤Ground Cable 3-4m ➤Brand new Messer Pressure Regulator ➤Gas Hose ➤15kg Spool Adapter ►►► Perfect for mobile use This unit is ideal for quick and mobile applications. Easy to load into a vehicle and take anywhere – yet it delivers consistent welding quality without compromise. Of course, it's equally suitable for stationary use. Questions: ----- How old is the machine? Our customers typically phase out their equipment after 3-5 years. Sometimes more, sometimes less. What is the condition, and does the machine work flawlessly? Yes! Everything works as it should! We fully disassemble, clean, replace worn parts, reassemble, and test every device. All machines are clean – we do not sell units that look run down! Excellent condition! Only minimal signs of use. All photos are original pictures of our machines – sample images. We guarantee no torches with burn marks on the displays. Can I negotiate the price with you? If you purchase multiple units, we can discuss a better price. Is shipping available? Yes, we can ship. The unit is packed on a pallet and shipped insured via our freight forwarder. Can I view the units in person? We operate as an online business, but you are welcome to pick up a unit in person and, of course, test it with us before payment. We do not have regular opening hours. Visits are strictly by appointment. All equipment is configured to your requirements and dispatched once payment is received – that’s our standard process. Do you offer a warranty? Duedpevl D Idsfx Ab Hsp No, we do not offer a warranty. We sell nearly new, affordable professional welding equipment – typically at 1/4 to 1/2 the new price. For the price difference compared to new, you could purchase two additional units from us, or use the savings for many years of maintenance. For example, the Fronius TPS 2700 as listed here costs around €8,500 new. We offer it for less than 1/3 of the new price. All prices are base prices – machines can be configured as needed. Robot unit or hand unit. Long or short connection package. Various torch packages available. Synchropulse. We have 270, 400, or 500 amp units in stock. CMT version available as either manual or robotic. The best way is to call us – we’ll discuss your application and provide an initial price estimate.

Tilstand: som ny (utstillingsmaskin), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A UNIT) Alu Edition ✅ Scope of delivery: ➤ Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 water cooling unit ➤ Fronius torch package with display on the torch (arc, amperage jobs etc. adjustable directly from torch) ➤ Fronius transport trolley ➤ Earth cable 3-4m ➤ Brand new Messer pressure regulator ➤ Gas hose ►►► Perfect for aluminium The Fronius TPS 2700 Alu Edition is especially suitable for welding aluminium. Precise welding technology - user-friendly operation ----- Duodpfxewbitvs Ab Hsp IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping available with no problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What condition are the units in? For clarification: we purchase used devices in near-new condition, disassemble them, check all components, replace wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean, with no burn holes in the displays, and no countless burn marks or dents scattered over the machine! With us, you'll buy an item that is also ⭐ visually appealing and doesn't look completely worn out! ►►► Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment methods are available? Prepayment or cash upon personal collection. ►►► Is insured shipping possible? Yes, we are happy to send your purchased set well packed and insured on a Euro pallet. ►►► Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty at this price. However, you are welcome to test the units on site and pay cash. ►►► Why buy from us? We are professionals for this Fronius welding equipment series and always have 60–80 units in stock – exclusively Fronius, no other brands! We know these units inside out and do not sell anything we are not familiar with.

Tilstand: svært god (brukt), Fronius TPSi 270 gas-cooled variant with long Job Master torch package (UP/DOWN adjustable incl. display) ✅ Scope of delivery: ➤ Fronius TPS 270i power source ➤ Fronius Job Master torch package, 4.5 meters long with display and all adjustment options on the torch ➤ Ground cable ➤ Pressure regulator Scope of delivery as shown in the photo. Powerful and versatile welding unit, 270 amperes, gas-cooled – lightweight and compact design – ideal for mobile use. Naturally, also perfectly suitable for stationary use. Reachable via Whatsapp / Viber ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►How old are the machines? Most machines come to us after being removed from company accounting. Due to the high turnover and different prior usage, we do not place special value on the machine's age. For us, it’s crucial that every device works flawlessly! ►►►What is the condition of the equipment? For explanation: we buy as-new used equipment, disassemble, thoroughly check everything, replace wear parts if necessary, and only after successful test welding do we release the device for sale. "All" units are clean, have no burn marks on the displays, and do not feature numerous burn holes or dents! You are buying an item from us that is also ⭐ visually appealing and not in a completely worn-out condition! ►►►Will you receive an invoice when buying from us? Yes, we provide a proper invoice. If you have a valid VAT ID, and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal pick-up Dodpfowblkqex Ab Hjup ►►►Is insured shipping possible? Yes, we will gladly ship your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one third of the new price and, unfortunately, cannot offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60–80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and only sell what we truly understand. If you have machines you wish to dispose of, sell, or trade in, please call us. Thank you.

Tilstand: som ny (utstillingsmaskin), ⭐ FRONIUS TPS 4000 ⭐ Full Equipment Device Description / Scope of Supply: Fronius TPS 4000 unit fully equipped – nothing left to be desired! - Power source Pulse 400 Amps - FK 4000 FC cooling unit with optional filter incl. flow control (==> if no water is circulating, the unit shuts down to protect the torch package). - VR 4000 with the optional rollers underneath + long interconnecting hose package + metal drive rolls – only the best components are installed. - Fronius AW5000 torch package with Job Master function on the torch (==> display on the torch / amperage, job, wire feed, arc adjustment directly on the torch) Photo = Delivery scope. Djdjvlwh Djpfx Ab Houp All indicated prices are base prices. Final prices are individually calculated according to your configuration requirements. Retail price approx. €15,000 (net), we offer it for 1/3 of the original price. Not to be compared with Transsteel scrap. Why buy from us instead of someone else: - We are professionals when it comes to this Fronius welding machine series. We have about 60-80 units constantly in stock. Only these Fronius machines, no other brands! - We don’t just push the machines through, but disassemble, inspect, and replace wear parts if needed. Devices are only sold once everything works flawlessly. - All our devices are sold with the popular Fronius torches. NO €100 E*b*a*y torches, but QUALITY! Fronius torches cost between €650 and €900 net, depending on features! - All our devices are clean and do not have burn marks on the displays or numerous burn marks/dents scattered across the unit! You’re buying a device from us that is also presentable – not one that's completely worn out! - As our customer, you have the chance to purchase matching spare parts and receive support at reasonable prices if needed. - You receive a proper invoice with stated VAT. All devices can be viewed, paid for, and collected at our main warehouse in Vienna by appointment! Insured pallet shipping is, of course, available! All prices are base prices; you can configure the units with us. Robot device or manual unit. Long or short interconnecting hose package. Various torch packages available. Synchropulse. 270, 400, or 500-amp units in stock. CMT version available for manual or robotic use. It’s best to call us to discuss your application area, and you’ll receive an initial price estimate from us.

Byggeår: 2023, Tilstand: ny, With the use of bolted, welded, and horizontal types, silos are used to store cement, fly ash, bentonite, and other bulk materials. Welded Silos Welded silos are preferred for low storage capacities, as they can be assembled and operated within 2 hours using a crane. They are ideal for local solutions where transport costs can be neglected. Semix is capable of manufacturing welded silos with capacities ranging from 50 to 150 tonnes. Duodpfx Abogau U Rs Hop Bolted Silos Bolted silos are preferred for their compactness during transportation. They can be shipped in containers to minimize transport costs. Thanks to their modularity, Semix is capable of manufacturing bolted silos with capacities ranging from 100 to 2,000 tonnes. Semix also provides a mechanical supervisor to ensure correct assembly of bolted silos. Semix has successfully installed bolted silos in Peru, Israel, Germany, and the United Kingdom.

Tilstand: klar til bruk (brukt), Plate magnet, lifting magnet, overband magnet, police magnet, magnetic filter, magnetic separator We constantly keep a variety of magnetic materials, models, and sizes in stock. Available standard sizes: 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 820 x 520 x 200 mm 820 x 520 x 250 mm 1000 x 500 x 180 mm 1200 x 500 x 180 mm 1200 x 500 x 200 mm 1200 x 500 x 250 mm 1500 x 500 x 180 mm 1500 x 500 x 200 mm 1500 x 500 x 250 mm 2000 x 500 x 180 mm 2000 x 500 x 200 mm 2000 x 500 x 250 mm All information is provided without guarantee, subject to prior sale! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, ferrous-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competency is providing customers with exactly what they need. Working together with our clients, we develop custom, tailor-made solutions and supply the corresponding equipment from our own production. Feel free to contact us by phone to find the right solution for your application. Djdpohupizofx Ab Heup Installation possible over all types of conveyor systems...

Byggeår: 2019, Tilstand: svært god (brukt), Plate magnet, lifting magnet, overband magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Design in stainless steel VA 1.4301, tightly welded SrFe strontium ferrite magnetic core, deep magnetic field! Dimensions: 620 x 520 x 200 mm 4 pcs. M16 eyebolts on the rear side Dodpfx Ashuphveb Hjup This lifting magnet was used as a "police magnet" by one of our customers in the meat processing industry. The stated price refers to one unit. Currently, 1 unit available from stock for immediate delivery! All information without guarantee, only while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competence is delivering exactly what the customer truly needs. We work together with our customers to develop custom, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Design in stainless steel VA 1.4301, tightly welded 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 820 x 520 x 200 mm 820 x 520 x 250 mm Fully welded stainless steel housing to protect the magnetic core Lifting eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Installation possible above all conveyor systems...

Byggeår: 2021, Tilstand: ny, Overband plate magnet from remaining stock / overproduction Design in stainless steel VA 1.4301, tightly sealed For sale is a plate magnet with threaded holes on the back. The magnet can be mounted either as a "police magnet" or used for extracting metal contaminants above a conveyor belt. Lifting eyes for suspension are included. Magnet block dimensions: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other sizes available from stock. Djdpfx Asfktk Hjb Heup

Byggeår: 2020, Tilstand: ny, Overband Plate Magnet from surplus stock / overproduction Dedpefktk Nsfx Ab Hsup Manufactured in stainless steel (VA 1.4301), hermetically sealed. For sale is a plate magnet with threaded holes on the reverse side. The magnet can be mounted either as a 'police magnet' or for extracting metal contaminants over a conveyor belt. Lifting eyes for suspension are included. Dimensions of the magnet block: 800 x 500 x 180 mm Only one unit available for immediate delivery. Many other sizes available from stock.

Byggeår: 2024, Tilstand: ny, Plate-type overband magnet with cleaning mechanism Manufactured from stainless steel VA 1.4301, fully welded Including pull-out cleaning drawer Dedpfx Ashfwmdsb Hjup Dimensions: 800x500x180mm 4 pcs M16 lifting eye bolts at the rear These two lifting magnets were previously used by one of our customers as "police magnets" in the meat processing industry. Both overband magnets are in excellent condition. The stated price refers to 1 piece. Currently, 2 units available immediately from stock! All information provided without guarantee, only while supplies last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence lies in delivering precisely what our customers actually need. We work together with our clients to develop custom, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone as well to find the right solution for your application. Plate-type overband magnet Manufactured from stainless steel VA 1.4301, fully welded Including pull-out cleaning drawer 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm Completely welded stainless steel housing to protect the magnet core Lifting rings for suspension Cleaning drawer for easy removal of accumulated contaminants. Can be mounted above all types of conveyor systems...

Byggeår: 2011, Tilstand: klar til bruk (brukt), Chiller CLIVET Type: MDE-32.300 Cooling capacity: 700 kW Dsdpfxsh Nm Ibe Ab Hsup 2 REFCOMP compressors: 134-S-140-LZ and 134-S-160-LZ Refrigerant: R134a Year of manufacture: 2011 Condition: Used Stock: 3 units available Price excludes air-cooled condenser We offer a wide range of other refrigeration equipment. Refrigeration units, compressors, coolers, condensers, chillers, cold rooms, refrigeration and catering furniture, as well as machines and devices for restaurants and meat processing. Check our other listings or call us—many items are not listed on Machineseeker.

Tilstand: ny, Gitterbox Pallet Cage Extension – new. Mega-M brand gitterboxes are containers used for storing and transporting small goods. The pallet extensions are made of galvanized wire, resistant to temperature and humidity fluctuations. Thanks to the hinged access window, goods can be loaded or unloaded at any time. Wire mesh baskets are used in various sectors of trade and industry. They are ideal for maintaining order, transporting small products, carrying heavy items, as well as product presentation in shopping centers. The offer includes a gitterbox, pallet extension with a hinged flap on the long side (MTP001667): - Width: 120 cm - Depth: 80 cm - Height: 90 cm Dusdpfx Aeu Tr Nmeb Hsp - Load capacity: 800 kg - Mesh size: 6 x 12 cm - Weight: 34 kg Net price: €63.00 each The offer includes a gitterbox, pallet extension with a hinged flap on the short side (MTP001391): - Width: 80 cm - Depth: 120 cm - Height: 85 cm - Load capacity: 800 kg - Mesh size: 6 x 10 cm - Weight: 34 kg Net price: €63.00 each The offer includes a gitterbox, pallet extension with double-sided opening NEW! (MTP004408): - Width: 120 cm - Depth: 80 cm - Height: 90 cm - Load capacity: 800 kg - Mesh size: 6 x 10 cm - Weight: 34 kg Net price: €68.00 each The listed prices apply to bulk sales (full truckload) for export outside Poland. Please contact us to discuss the details. For wholesale and retail prices within Poland, please contact us directly. * Large quantities available from stock * Delivery possible throughout Europe * Above offer does not include transportation costs * Location: Chmielów/Tarnobrzeg, Poland

Tilstand: helrenovert (brukt), Byggeår: 2012, maskin-/kjøretøynummer: AA1/016854, Funksjonalitet: fullt funksjonell, 3-AXIS DRILLING & MILLING CENTER Brand: SCM Model: TECH Z2 Ref R0410.01 Serial no.: AA1/016854 Year: 2012 (Photos taken prior to overhaul, functional testing & cleaning) MACHINING CAPACITIES: Dodpfx Abev Tzrvo Houp - Max height (thickness) of workpiece: 160 mm - Max length of workpiece: 2700 mm With twin table: 1210 mm - Max width of workpiece: 1300 mm Motions: - X-axis stroke: 3060 mm, Y-axis stroke: 1735 mm, Z-axis stroke: 250 mm - Max traverse speed (vectorial): 60 m/min MACHINE COMPOSITION: - 6 pneumatic locking beams for suction cups, e.g., 120x120 or 55x120 mm - Automatic lubrication unit - Movable head aggregates composed as follows: (Movement in X by rack and pinion, movement in Y by ball screw and bushings; high-precision linear guides with automatic lubrication) • Milling/Routing unit 11 kW (15 HP): - Rotation speed 1,500 - 24,000 rpm; variable speed, CW/CCW - Tool holder interface: HSK63F, ER32 collet - On-board 8-position tool changer - Perimeter dust extraction hood • 18-Spindle Drilling Unit: - 12 independent vertical spindles (8 in X direction, 5 in Y direction) - 6 horizontal spindles (4 in X direction, 2 in Y direction) - Spindle pitch 32 mm for M10 / Ø11 mm bits - Rotation speed 4,000 rpm - Pneumatic vertical travel 60mm - Perimeter dust extraction hood • Integrated Saw/Slotting Group: - Blade Ø120 mm thickness 6 mm - Speed 6,000 rpm - Pneumatic vertical travel 60 mm • Mobile control panel on support arm with PC: – Windows XP operating system – 17" LCD screen – Ethernet – Machine interface software: Xilog and Maestro OTHER FEATURES: - Power supply: 400V, 3-phase+N+PE, 50 Hz, IN37A - Electro-spindle motor: 12 kW - Drilling/slotting motor: 2.2 kW - 1 vacuum pump 2.4 kW: 90–108 m³/h - Pneumatic supply: >=7 bar - Dust extraction: Extraction ports: 2x Ø150 mm (1 port Ø200mm using the installed bypass) Recommendation: 30 m/s – 3400 m³/h - CE certified machine with photoelectric safety barrier Operating dimensions with safety zone: see documentation extracts Transport footprint: to be specified upon material preparation Estimated total weight: 2,200 kg Machine supplied with instruction manual and software, spare parts list, and electrical and pneumatic diagrams. Please contact us for consumables, accessories and/or extraction systems. Machine upgraded, CE compliant, with quality control and dynamic function testing. Comes with 3-month warranty & certificate of compliance. Available from stock, subject to prior sale. Ex-works price. Delivery and additional services upon request.

Tilstand: nesten som ny (brukt), 800 m² Schäfer R3000 Multi-Tier Mezzanine, 3 Levels Used equipment, excellent condition, like new, see photos. Dsdehzw Ivspfx Ab Hsup 3-level shelf mezzanine system by Schäfer Including lift Manufacturer: SCHÄFER R3000 CAD planning and installation included Three-tier design Partial sale possible Negotiable price: on request! Item is in stock. Transport and installation available upon request. Viewing available anytime by appointment. Further information available on request. We constantly have over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! Please see our terms and conditions; all prices exclude VAT ex works.) Purchase / Sale: We are continuously looking for and offering a variety of items from various sectors. - Swept-clean factory clearances - Business liquidations - Fast - flexible - efficient! We also clear and/or dispose for insolvency administrators. Contact us with a few key details and we will get back to you promptly. To visit our website, please click on our logo!

Tilstand: nesten som ny (brukt), 2.700 m² Schäfer R3000 mezzanine, 2-storey Used item, top condition, as new – see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiation price: on request! Item is in stock and available immediately Transport and assembly available upon request. Dedpjfiqhfsfx Ab Hsup Inspection possible at any time by appointment. Further information upon request. Constantly over 5,000 running meters of pallet racks from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our T&Cs; all prices excl. VAT ex stock) Purchase / Sale: We constantly look for and offer numerous items from various sectors broom-clean plant clearances company liquidations Fast – flexible – effective! We also clear and/or dispose for insolvency administrators. Contact us with some key words, and we will get back to you immediately. To visit our page, please click on our logo!

Tilstand: nesten som ny (brukt), 2.000 m² Schäfer R3000 Two-Storey Mezzanine Warehouse Platform Used equipment, top condition, as new—see photos. Manufacturer: SCHÄFER R3000 CAD planning and assembly. Price on request! Partial purchase possible. Negotiable price: on request. Goods are in stock and available immediately. Transport and assembly available upon request. Inspections possible at any time by appointment. Further information on request. Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock. Dusdpfxefiqhmo Ab Hjp (Subject to alterations, errors in technical data, information, and prices, as well as prior sale! See our T&Cs. All prices are ex-works, excluding VAT.) We buy and sell: We are constantly looking for or offering numerous items from various sectors • Broom-clean company clearances • Business liquidations • Fast – flexible – efficient! We also clear or dispose of goods for insolvency administrators. Contact us with a brief description and we will reply promptly. To visit our homepage, please click on our logo!

Tilstand: svært god (brukt), Goedhart to-side radiator Dujdpjvw Np Refx Ab Hep - Type: DRS 44637 - Cooling capacity: 60.7 kW at DT8, 58 kW at DT7 - Fin spacing: 7 mm - Number of fans: 4 x 630 mm - Dimensions: 4500 x 1550 x 700 mm - Block made of stainless steel - Refrigerant: NH3 - Capacity: 72 L - Weight: 650 kg - Stock status: 3 units available - Stock number: CH 535 - Condition: used