Kjøp brukt Stocker (198)

Byggeår: 2011, Tilstand: verkstedoverhalt (brukt), Nr. 2401 1 used double piston screen changer – backflush type Manufacturer: ECON Type: ESK 480-4B Year of manufacture: 2011 Screen block 1: 2 pistons, each with 2x Ø 123.5 mm Screen block 2: 2 pistons, each with 2x Ø 176.3 mm, with a screen area of 490 cm² Complete with: - Hydraulic unit - Siemens control system The screen changer is ready for demonstration and can be viewed on short notice by appointment. Njdpfxegbfwme Afrekt Further screen changers / melt filters available from stock in Wuppertal: EREMA RS and Laserfilter Kreyenborg K-SWE / RS Ettlinger ECO BD Plast Alphatec Gneuss Brit-Ass

Byggeår: 1996, Tilstand: verkstedoverhalt (brukt), Nr. 2590k 1 used compounding and pelletizing line, throughput up to 1,200 kg/h depending on material, consisting of: Twin-screw extruder THEYSOHN type TSK 90 Screws: 2x Ø 90 mm – 36 LD, co-rotating Segmented screws and barrel, water/medium cooled Screw speed up to 300 rpm Extruder drive 255 kW DC 1x side feeder extruder TSD 75 twin-screw with 3 kW drive 3x degassing ports 1x screen changer No. 1 type K-HS-Y, 176 mm screen, with hydraulics 1x melt pump with 22 kW drive 1x screen changer type K-SWE 180 RS backflush with hydraulics 1x strand die with 32 x Ø3.5 mm holes 1x strand cooling trough 620 x 5,000 mm 1x strand pelletizer SG 300, 11 kW drive Touchscreen control ResoTec / control cabinet Nsdpfx Afegbffverjkt Inspection/demonstration available at short notice by appointment. Additional compounding lines and accessories can be found in our machinery stock list online on our homepage.

Byggeår: 2003, Tilstand: verkstedoverhalt (brukt), Lager - Nr. 2651 Nodsiyyf Iopfx Afrokt 1 used, partially overhauled underwater pelletizing system from 2023 Throughput up to approx. 450 kg/h, depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic station A300 granulator incl. die plate and knife head, drive motor 4.4 kW By-pass system TVE 1000 ED pellet dryer drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW, 15 m³/h Heat exchanger Control system Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock in Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Tilstand: brukt, Byggeår: 2019, kontrollerprodusent: Sonstige, kontrollermodell: MAPPS IVB, Beskrivelse: Tekniske data: Maks. slipediameter: 350 mm Maks. slipelengde: 150 mm Slipehjul diameter: 25–180 mm Svingeområde slipehodespindel (maks.): 230° Slipehodespindel: Teknologi: Innvendig slipehodespindel Turtallsområde: 3–20.000 o/min Maks. effekt: 11 kW Slipehjulsfeste: HSK-A63 Borespindel: Teknologi: Borespindel Turtallsområde: 1.500–3.500 o/min Maks. effekt: 7,5 kW Verktøyfeste: HSK-A63 Nkodpfxjxx Erae Afrst Emnespindel: Teknologi: Direkte drift Spennflate: Ø265 mm Maks. bordbelastning: 200 kg Emnespenning: Pneumatisk chuck Generelt: X/Z vandring: 965/532 mm Hurtiggang X/Z: 24/20 m/min Utstyr/Tilbehør: Veimålesystem: Direkte (glasslinjal) i X/Y Sponhåndtering: Magnetbåndtransportør Kjølemiddelstyring: KSS-system med papirbåndfilter og temperaturregulering Emnemåling: Måleprobe, Renishaw MP 250 med kalibreringsstasjon Verktøymagasin: 8 stasjoner (hver 4 for slipe- og boreverktøy) Avretter: Avretterhjul + enkornsdianant (Marposs) Innstillingsmodus: Elektronisk håndhjul Automatisering: Fanuc-robot M-20iA med magasinstocker (30 stasjoner Ø329 mm) Slipeskyllekstraktor: Akamatsu HVS-100-CE 044 Ytterligere utstyr: Spindelkjøler, trafo

Byggeår: 2026, Tilstand: ny, Magnetseparator for chip conveying line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal particles Tube diameter: 180 mm Nkodjcqvhxspfx Afret Immediately available Location: In stock at 54634 Bitburg

Tilstand: ny, Byggeår: 2025, maskin-/kjøretøynummer: C890, PANHANS Bandsaw Nsdpfx Asbzmb Hefrskt Model BSB 600 Frame in modern steel construction, table made from thick-walled, heavily ribbed cast iron design, solid grey cast iron bandsaw wheels Technical features: • Upper and lower PANHANS bandsaw blade guide APA II • Fine-planed cast iron table • Table tiltable up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber tires • Fence rail usable to the left of the saw blade • Flip-over fence profile • Blade tension indicator • Mechanical height adjustment by handwheel with locking ratchet • Automatic motor brake with main switch and motor protection switch Technical data: • Max. cutting height: 380 mm • Max. cutting width: 570 mm • Table size (WxD): 590 x 810 mm • Table height: 905 mm • Wheel diameter: 600 mm • Motor power: 2.2 kW • Wheel speed: 820 rpm • Max. blade length: 4710 mm • Extraction port diameter: 2 x 100 mm • Machine weight: 272 kg • Machine dimensions (LxWxH): 1120 x 750 x 2125 mm Location: Ex stock Bitburg Top exhibition price Free loaded

Tilstand: som ny (utstillingsmaskin), Byggeår: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements. Maximum performance in this class. Very quiet operation. Application Clean air extraction units for wood chips and wood dust. Designed for commercial use. Suitable for all woodworking machines with a corresponding extraction nozzle diameter. Can also be used for multiple dust sources. High-quality, well-thought-out construction. Robust and compact housing made of galvanized sheet steel. Extraction nozzle can be easily converted from left to right, allowing flexible use. Large maintenance openings. Large-capacity, mobile chip containers with clamping brackets and collection bag. System delivered fully assembled, ready for immediate use. Mobile design. Filter Description Ultra-compact with maximum filter surface area. Filter material made from polyester fleece, aluminium-coated, washable, and therefore with long service life. Filter supplied as standard in an antistatic version, tested and approved according to Category M-BIA. Filter resistance monitored via a differential pressure switch, adjustable with a warning lamp on the control box. The fan is positioned downstream of the filter. Nkedpfx Afecnw U Dorot Equipment Details: With innovative locking device for secure container positioning. All units in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with parking brake Pre-assembled for machine recognition connection for up to 8 machines and shutter controls Manual cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Specifications Extraction nozzle diameter: 125 mm Motor power: 2.2 kW Supply voltage: 400 V Frequency: 50 Hz Rated air flow: 1095 m³/h Maximum air flow: [n/a] Vacuum at rated volume: [n/a] Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction nozzle to floor: 850 mm Weight: 194 kg Location: Expected in stock 54634 Bitburg

Tilstand: ny, Byggeår: 2024, Magnetseparator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal particles Tube diameter: 180 mm Nkedpfx Aocqvhwsfrot Location: Available from stock 54634 Bitburg - Immediately available -

Tilstand: ny, Byggeår: 2025, Schneider Compressor UNM 510-10-90 D A714000 Nodpfx Asbyhvrsfrskt Mobile piston compressor with horizontal tank Standard delivery includes all safety fittings, electric power cable with plug, and Condor pressure switch Compressed air tank equipped with safety valve, tank pressure gauge, and condensate drain valve Welded rear handle improves loading and transport capability Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch High-grade features for universal use With V-belt drive, 2 in-line cylinders for especially smooth operation, and 400 V three-phase motor with external motor protection Low compressor speed ensures longer component life, reduced noise level, and minimized vibrations Large fan flywheel for optimal cooling Includes filter regulator for controlled compressed air, cleaned of condensate, dirt, and oil Comes with 2 m device power cable with rubber coating and air outlet via quick coupling Device power cable with phase inverter 10-year warranty on the tank against rust-through Technical Data Pressure 10 bar Intake capacity 510 l/min Filling capacity 390 l/min Speed 1240 rpm Tank volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (W x D x H) 1070x495x895 mm Drive power 3.0 kW Voltage 400 V Location: Available from stock Bitburg Subject to prior sale

Tilstand: ny, Byggeår: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't settle for half measures. With the F 4, we offer you a model that lets you produce fully processed edges on just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min. Ready for operation: approx. 3.5 min. Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10” touchscreen Overhead quick-heating glue pot (maintenance-free) Support plate for edge material Automatic central lubrication (crosscut saw, corner rounding unit) Optical display for workpiece sequence Extendable front support arm Changeover pot system incl. glue change device for PUR processing Surface scraper with dual sensing Pneumatic roller-end trimming (scissor action design, Hebrock system) Double roller top pressure unit (ball bearing mounted) Transport chain with permanently fixed special chain plates Nkedpfx Aohqadcofrjt Jointing cutter Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius profile scraper (incl. pneumatic retraction) F4/09/4 multi-radius profile scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex-stock 54634 Bitburg - Available at short notice -

Byggeår: 2012, Tilstand: svært god (brukt), Weima sold for 4-shaft shredder ZM 30 Screen size: 20/25 mm Nodpfx Aehh Dpkofrskt Location: Ex stock 54634 Bitburg - immediately available -

Tilstand: ny, Byggeår: 2026, Kündig PERFECT-3 1350-REdXi_LL/Bs Automatic Sander incl. structuring unit Robust 3-belt wide-belt sander for the highest demands. Constant working height thanks to upper section adjustment. Working width: 1350 mm Max. workpiece height: 205 mm (up to 18.5 kW main drive motor) Abrasive belt dimensions for 'R' and 'Ed-L': 1350 x 2000 mm Abrasive belt dimensions for 'Xi-L': 150 x 4700 mm Unit 'R' Contact Roller: - Grooved rubber contact roller, hardness 80 Sh - Infinitely adjustable contact roller height via touch screen - Motorised raising/lowering of the contact roller depending on unit selection - Increased belt speed Unit 'Ed-L' Diagonal Sanding Pad: - Electronic sanding pad with 22 mm segment width (pivoting special version), with variable edge pressure, automatic pressure control, and memory for the sanding pad segments - Infinitely variable sanding belt speed (with PLC memory) - Additional sanding pad insert Unit 'Xi-L' Cross Sanding Unit in Machine Frame: - Electronic sanding pad with 22 mm segment width, variable edge pressure, automatic pressure control, and memory for sanding pad segments - Cross sanding belt supported by lamella belt - Infinitely variable sanding belt speed (with PLC memory) PERFECT-3 1350-REdXi-LL Main motors: - 1st unit: 18.5 kW (25 HP) - 2nd unit: 11 kW (15 HP) - 3rd unit: 16 kW (MPM) (22 HP) - 400 V / 50 Hz Workpiece feed: - Fabric-reinforced rubber conveyor belt - Rubber-coated conveyor drive roller - Motor: 2.2 kW (3 HP) / 400 V / 50 Hz - Feed speed: infinitely variable 3 - 15 m/min Vacuum device: - Mounted on feed table - Additional perforation of conveyor belt across 200 mm width - Vacuum generator: 2.2 kW (3 HP) / 400 V / 50 Hz Abrasive belt cleaning: - Air knife for cleaning the sanding belts on units 'Ed-L' and 'Xi-L' - Operation-controlled, with extraction channels and driven by 1.1 kW (1.5 HP) blower / 400 V / 50 Hz Pressure elements: - Infeed: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm - Between units: rubber-coated pressure roller ⌀ 50 mm - Outfeed: rubber-coated pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 Sh 2. Diagonal sanding pad with lacquer equipment and air knife for belt cleaning 3. Cross sanding unit with lacquer equipment and air knife for belt cleaning Nedpfsr Hr Dzjx Afrokt Main motors: 18.5 + 11 + 16 kW / 400 V / 50 Hz Additional equipment: - W61: Structuring unit at outfeed - B10: Abralon structuring brush, Mink - W71: Additional quick-change shaft for brush 1350 - B12: Brass-plated steel wire brush 1350 - C10: LED package - A20: 5 x motorised control dampers (2x D=180 + 3 x D=150) Working width: 1350 mm Max. opening: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex-stock 54634 Bitburg - immediately available -

Tilstand: ny, Byggeår: 2026, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release saw blade system for professional users Article number: 5150063 DESCRIPTION Heavy professional design with high dead weight for maximum smooth running Especially smooth and precise operation thanks to torsion-free machine housing Large, solid grey cast iron saw table made from a single piece, tiltable from 0° to +45°, with ground and polished surface Nsdpfovk Sfbsx Afrskt Patented table tilting device with handwheel and rack Quick-release saw blade tensioning Precision saw blade guidance Fast and precise cutting height adjustment via handwheel and rack with millimetre scale Safety switch for automatic shut-off when the door is opened Large cast parallel fence Supplied as standard with angle stop Table tilt via rack and handwheel TECHNICAL DATA Dimensions and Weights Length (product) approx. 1190mm Width/Depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction Connection Extraction port diameter: 2 x 120mm Work Table(s) Work table length: 830mm Work table width: 600mm Work table height: 830mm Work table tilt: 0 – 45° Work table tilt explanation: For safety reasons, a holding device/stop must be installed at angles over 20°, to prevent the wood from slipping! Electrical Data Connection voltage: 400V Mains frequency: 50Hz Output power: 4.1kW Cutting Ranges Max. cutting height at 90°: 400mm Max. cutting width with fence: 570mm Max. cutting width without fence: 610mm Saw Blade Saw blade speed(s): 1615m/min Flywheel diameter: 630mm Saw blade length: 4600mm Saw blade guidance: Precision guide above and below Location: Ex stock 54634 Bitburg - Immediately available -

Tilstand: ny, Byggeår: 2026, Weima Chipper / Shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times worldwide in woodworking operations, for example. The high quantity of these in-demand shredders ensures time-tested and reliable technology at the best price-to-performance ratio. The machines are characterized by their extremely robust construction, ensuring exceptional durability (even outdoors). Intuitive Operation Thanks to Siemens PLC Control with Touch Display To ensure the electronics are perfectly matched to the machine, we design, build, and wire our control cabinets in-house. We use only high-quality components, such as those from Siemens or Rittal. Intuitive touchscreen controls allow for rapid adjustments. Features such as setting the pusher cycle or stop enable high throughput rates. The integrated overload protection also prevents machine failures. No Material Bridging Thanks to Self-Cleaning Hopper Design The hopper serves several functions. It is used to load the material to be shredded—manually, mechanically, or via conveyor. The generous opening also allows for convenient filling of very large parts. Of critical importance for shredding is its special design, which is rounded at the front to effectively prevent material bridging. Even bulky materials are automatically cleared by the shredder. Optional hopper extensions and lids with gas struts are available if required. Durable Rotor Bearings Thanks to Offset Design A rotor bearing must be particularly robust due to the extreme loads during shredding operations. To prevent dust or foreign matter from entering, we have offset it from the machine frame. This also makes it very maintenance-friendly and easy to access. Technical Data: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 – 125 - Power (kW): 22 - Number of blades: 54 - Available blade sizes (mm): 40 x 40 - Particle size (mm): - Suction nozzle (mm): 200 - Feed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 Nodpfjpdqzxex Afrjkt - Weight (approx. kg): 2200 Accessories: - Second row of blades - Log spacer Location: Ex stock 54634 Bitburg - Immediately available -

Tilstand: ny, Byggeår: 2026, For sawing, milling, surface/thickness planing, and optional slot mortising in the most confined spaces. - High-precision sliding table made of anodized aluminum, various lengths - Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional stop flaps - Max. saw blade Ø 315 mm, tiltable from 90° to -45° - Large spindle tilting range from 90° to -45° to the rear - Four milling speeds up to 10,000 rpm, adjustable manually - Spindle with reversible rotation (right/left) - Heavily ribbed surface planer tables made from stress-relieved cast iron for decades of stability and flatness - 2-stage feed for thickness planing - Three independent industrial motors for continuous operation - With lockable main switch and motor protection switch - Fixed handwheels Dimensions and Weight Net weight approx.: 857 kg Surface Planer Surface table width: 410 mm Surface table length: 2000 mm Max. chip removal (surfacing): 5 mm Extraction Connection Extraction port diameter: 3 x 120 mm Extraction port diameter (blade guard): 60 mm Installation Information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement note: Dimensions account for maximum travel paths or usable lengths. Working Area Working area length: 1600 mm Working area width/depth: 1600 mm Working area note: Please add these dimensions to the space requirement to get the recommended free installation area for the machine. Thicknesser Thickness table length: 757 mm Thickness table width: 423 mm Working height min.: 3 mm Working height max.: 230 mm Max. chip removal (thicknessing): 5 mm Electrical Data Supply voltage: 400 V Network frequency: 50 Hz Rated oper./duty cycle: S6 Duty cycle: 40% Drive motor output: 3 x 5.0 kW Sliding Table and Table Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. Milling Tool Diameter Max. tool diameter below table: 210 mm Max. tool diameter below table at 45°: 150 mm Max. tool diameter for tenoning: 275 mm Nodeih Dxlopfx Afrskt Planer Cutterblock Cutterblock type: TERSA Cutterblock diameter: 87 mm Number of knives: 4 Cutterblock speed: 5200 rpm Circular Saw Unit Cutting length: 2600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of the blade: 3260 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade protrusion at 90°: 100 mm Max. saw blade protrusion at 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade note: with scoring unit (Main) saw blade speed: 4000 rpm Feed Feed speed: 6 – 12 m/min Location: In stock at 54634 Bitburg - Immediately available -

Tilstand: ny, Byggeår: 2025, Martin Thickness Planer T 45 with Tersa Cutter Block Accessories: 7.5 kW The T45 thickness planer provides the ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control allows you to store up to 99 different planing dimensions, making adjustment of the planing height effortless and ensuring the first workpiece fits perfectly. The thickness table can, of course, be adjusted at the push of a button or incrementally in 0.1 mm steps. The feed control switches are also conveniently within reach. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutter block, guarantees excellent surfaces. Thanks to its sound-insulating design, the machine operates quietly even in its standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Operation: single-axis control for planing dimension, max. 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of planing thickness with digital display, push-buttons for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes locking mechanism for easy knife change • Thickness table: electronic thickness adjustment with fine setting, feed rate 10 mm/s, tilt-resistant on 4 support spindles, table surface finely planed • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm for compensation of differently sized timber, gentle and self-cleaning rubber rollers, easy roller change; segmented pressure bar at infeed • Extraction: tilting, split hood with chip extraction port Ø 160 mm, connectable left/right as required (optional both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: centralized lubrication rail for oiling points; bearing/cutter block lubrication via grease nipples Nsdpfx Afoqlclbjrskt • Accessories: 1 grease gun with long-life grease, 1 oil can, 1 open-end wrench, 1 knife-changing tool, 1 pair of blind knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions: sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Working noise (w/o extraction) P2 65 Working noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Working noise (w/ extraction) 90 Dust emission: low-dust according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Tilstand: svært god (brukt), Byggeår: 2020, Funksjonalitet: fullt funksjonell, inngangsspenning: 230 V, Utstyr: belysning, fryser, Set: EPTA Costan / Carrier Top Freezer + AHT Miami 250 Deep Freezer Chest Freezer Freezer Plug-and-Play Multipurpose Deep Freezing Units Discount Store Costan EPTA / CARRIER Top Freezer 2580 G Modern solution for expanding deep-freeze capacity Plug-and-play refrigeration units Technical specifications – photo added The freezer unit serves as an extension of the chest freezer and saves space. Can be set up above the MIAMI 250. Nkjdpfxex Adaws Afrst Used equipment – very good condition – tested and fully functional. REFRIGERANT – R290 Shipping costs depend on weight, volume and, most importantly, distance. For inquiries, the following information is needed: delivery address (postal code and name of location). Further details should be clarified by phone, so we ask that you contact us by phone to request transport costs and additional delivery terms. Our contact details can be found under the legal information of the seller. Cash payment on collection is possible. We sell and export worldwide. Due to our large stock capacity, we can deliver even larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices – VAT excluded. Opening hours Mon-Fri: 8:00-16:00 Sat: Closed

Tilstand: svært god (brukt), Byggeår: 2011, Funksjonalitet: fullt funksjonell, CNC Dual-Spindle Turning Center Control System: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel paths: X1 – Tool Turret I: 270 mm Y1 – Tool Turret I: 120 mm Z1 – Tool Turret I: 1200 mm X2 – Tool Turret II: 195 mm Y2 – Tool Turret II: 80 mm Z2 – Tool Turret II: 1200 mm X3 – Sub-spindle slide: 180 mm Z3 – Sub-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% DC): 40/48 kW Torque (100/40% DC): 570/680 Nm Speed range: 0–4000 rpm Bar capacity: 102 mm Draw tube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Sub-Spindle Integrated spindle motor ISM 76 Drive power (100/40% DC): 25/32 kW Torque (100/40% DC): 280/380 Nm Speed range: 0–5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 Nsdpfxewcd S No Afrokt Tool holder diameter VDI (DIN 69880): 40 mm Maximum power (100/40% DC): 10.9/14.2 kW Maximum torque (100/40% DC): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Maximum power (100/40% DC): 10.9/14.2 kW Maximum torque (100/40% DC): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X/Z-Axis: 30/45 m/min Tool resolution Z-Axis: 0.001° Feed force (40% DC) X/Z-Axis: 16/13 kN EQUIPMENT/ACCESSORIES - Short bar loader magazine IRCO ILS-RBK 100/16 - Various main spindle reduction tubes - NC-controlled workpiece pick-up device from both main and sub-spindle The device consists of NC-controlled * Horizontal axis * Swivel unit * Vertical axis * 2-jaw gripper with exchangeable gripper jaws - Conveyor belt for removal of workpieces from the machine - Coolant system 8/20 bar with immersion cooler - Chip conveyor - Oil mist extraction unit - Control cabinet cooling unit (up to 40°C) - Sub-spindle slide - Easy-Tool Monitor - 1 collet chuck for quick-change collet head size 100 for main spindle - 1 collet chuck for quick-change collet head size 100, Nova axis-fix for sub-spindle - Approx. 40 various quick-change collet heads size 100 (full stock) - Pneumatic change-over device, ø 100 mm - Approx. 50 various tool holders, static and driven (full stock) - Levelling elements - Documentation

Byggeår: 2011, Tilstand: svært god (brukt), Dry air dryer FarragTech CARD 10 S with container and 2 x vacuum conveyors ICEVA GS-4mD Stock no.: 503577 Machine/Device type: Dry air dryer Manufacturer: FarragTech GmbH Model: CARD 10 S Year of manufacture: 2011 Container volume: 10 ltr. Throughput: 2 h/3.25 kg/80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x vacuum conveyors ICEVA GS-4mD Nkjdpfsx Iduuox Afret

Tilstand: brukt, Byggeår: 2000, Stock A-14 V567A/1650P er en høyhastighets lamineringsmaskin utviklet spesielt for emballasjeindustrien. Den benytter avansert teknologi for effektiv laminering av ulike materialer, noe som gir forbedret holdbarhet og beskyttelse av emballasjeproduktene. Format: 1640 x 1640 mm Utstyr: Mater: Kantinnmating (MIRUS) Arkinnmating via transportkjeder Pressehastighet: 3 000 sykluser/t Styring: Siemens PLC-styring / Micro Control System Limstasjon Lamineringsstasjon Tekniske detaljer Maks. størrelse: 1640 x 1640 mm Min. størrelse: 500 x 500 mm Nedpfx Ajwcqwxefrjkt Arkvekt: Kartong 100 – 800 g/kvm Innmatingshøyde: 1 400 / 1 800 mm Bærekartong: Enkeltsidig bølgepapp, E-/B- og F-bølge, dobbeltsidig bølgepapp opptil 7 mm tykkelse, kartong fra 0,5 mm tykkelse

Byggeår: 2025, Tilstand: som ny (utstillingsmaskin), Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: S25Synthesi01, Stretch wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs, in several steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage up/down speed Buzzer at wrap start and cycle end stop Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push button for machine power-on as well as start, stop & reset function, according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Stepless turntable speed adjustment 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 rotations) F06 – Number of wraps at pallet top (1–10 rotations) F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for base & top wraps / up & down movement independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrap (upwards/downwards) F01-2 – Simple wrap (upwards or downwards only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with deactivation of the photoelectric sensor) F22/F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for corner protection placement F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button Optional features available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Nkedpfxjx Ta R Ne Afrst Photoelectric sensor for black products Cutting device, etc. Additional units available from Ludwigsburg stock. Images may show options subject to a surcharge. Picture similar

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1996, lastekapasitet: 3 300 kg, løftehøyde: 6 200 mm, fri løftehøyde: 2 180 mm, drivstofftype: elektrisk, mastetype: triplex, byggehøyde: 2 950 mm, gaffelbærerbredde: 1 520 mm, gaffellengde: 970 mm, total lengde: 3 250 mm, drivtype: Elektro, konstruksjonsbredde: 1 850 mm, Four-way side loader Load center: 400 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing & financing on favorable terms are always possible with us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail regarding this EVS35-33/10-08/63TRDK7.5. Nedpfx Afjwdkntsrskt P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom modifications for forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale at our facility. Fork positioner, Full free lift,

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2015, driftstimer: 15 322 h, lastekapasitet: 7 000 kg, løftehøyde: 5 700 mm, fri løftehøyde: 1 800 mm, drivstofftype: diesel, mastetype: triplex, byggehøyde: 2 950 mm, gaffelbærerbredde: 1 540 mm, gaffellengde: 1 390 mm, egenvekt: 11 800 kg, total lengde: 5 200 mm, drivtype: Diesel, konstruksjonsbredde: 2 280 mm, Sideload forklift Load center: 700 Fork width: 250 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 355/65-15 Rear tires type: Pneumatic Rear tires size: 355/65-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing & financing at attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this GX70/14/57TR. P.S.: Our master forklift workshop specializes in repairs, maintenance, refurbishments, and custom builds for forklifts from 8 tons and up. We can also offer to display your vehicle at our premises for commission-based sale. 1x NIVO fork Nedswx Sy Hepfx Afrokt Heating, full cabin, full free lift, Platform height: 1030 mm

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2008, driftstimer: 18 263 h, lastekapasitet: 7 000 kg, løftehøyde: 6 300 mm, fri løftehøyde: 2 100 mm, drivstofftype: diesel, mastetype: triplex, byggehøyde: 3 150 mm, gaffelbærerbredde: 1 540 mm, gaffellengde: 1 400 mm, egenvekt: 11 050 kg, total lengde: 5 150 mm, drivtype: Diesel, konstruksjonsbredde: 2 280 mm, Sideload forklift Load centre: 700 Fork width: 200 mm Fork thickness: 65 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 355/65-15 Rear tyres type: Superelastic Rear tyres size: 355/65-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, pallet trucks, and sideloaders in stock at our Hamburg and Gdansk locations. Please visit our website - sago-online. Hire purchase and financing on attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr Peter Sawitzki, will provide you with comprehensive advice on this GS70/20/63TR. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tonnes. We are also happy to showcase your vehicle with us for commission sales. Fork positioner, Heater, Full cab, Full free lift, Njdpfx Ajwwm Uvsfrekt Platform height: 970 mm

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2002, driftstimer: 5 975 h, lastekapasitet: 6 000 kg, løftehøyde: 4 500 mm, fri løftehøyde: 680 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 3 200 mm, gaffelbærerbredde: 1 520 mm, gaffellengde: 1 250 mm, egenvekt: 9 800 kg, total lengde: 5 100 mm, drivtype: Diesel, konstruksjonsbredde: 2 050 mm, Side loader Load center: 600 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Super elastic Front tires size: 3.00-15 Rear tires type: Super elastic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing and financing options are readily available at attractive terms. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail on this GX60/12/45. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons and up. If you wish, you can also consign your vehicle for sale through us. Heater, full cab, Nedewx Sy Topfx Afrjkt Platform height: 1050 mm