Kjøp brukt Stocker (161)

Byggeår: 2015, Tilstand: svært god (brukt), maskin-/kjøretøynummer: KHT, Stål / Stocker produsert hallkran portal kran brokran inkl. stålkonstruksjon + gulvstyring Mål stålkonstruksjon ca. lengde 15m x bredde 9,5m med 1x brokran 12500 kg, løftehøyde 6m Nyttelast/løftekapasitet 12,5 tonn Tekniske data for systemet: Kranbane-/stålkonstruksjon bestående av HEA/HEB180 bjelker, kranbaneskinner HEB240 Lengde ytterkant stålkonstruksjon ca. 15m Iajdpfjwgwrqsx Agmel Total bredde ytterkant (stålkonstruksjon) ca. 9,53m Total høyde kran ca. 4,52m Øvre kant kjøreskinner ca. 3,99m Nedre kant kjøreskinner ca. 3,87m Øvre kant bro ca. 4,52m Nedre kant bro ca. 4,13m Krokhøyde ca. 3,4m Sporvidde ca. 6,23m Stolpeavstand: venstre (2,65+4,44+4+3,5m), høyre (4,6+4,9+4,9m) Systemet leveres komplett: Stålkonstruksjon komplett med strømskinne 1x bro inkl. kjøredrift 1x 12 500 kg ståltau-takle SH 5032-25 4/1 1Am M4 løftehastighet 1/6,3m/min Kranen er demontert og umiddelbart tilgjengelig Sted for varen: 75053 Gondelsheim Svært god stand, se bilder Frakt med speditør eller henting kun etter avtale om tidspunkt

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2016, driftstimer: 18 676 h, lastekapasitet: 6 000 kg, løftehøyde: 4 500 mm, fri løftehøyde: 650 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 3 190 mm, gaffelbærerbredde: 1 330 mm, gaffellengde: 1 190 mm, egenvekt: 9 430 kg, total lengde: 4 800 mm, drivtype: Diesel, konstruksjonsbredde: 2 000 mm, Sideload forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, industrial forklifts & sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing and financing under favorable terms are always available. We are also happy to purchase your used machine outright, even if you don’t acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this GX60L/12/45St UK model. P.S.: Our forklift master workshop specializes in repair, overhaul, refurbishment, and custom construction for forklifts from 8 tons upwards. We are also happy to sell your vehicle on consignment in our facility. Heater, full cabin, Platform height: 1,050 mm Iaedpou Dy Emjfx Agmsl

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1990, maskin-/kjøretøynummer: 0166890274834, styretype: manuell, automatiseringsgrad: manuell, aktueringstype: hydraulisk, stansekraft: 50 t, stanse-diameter: 100 mm, slagslengde: 60 mm, halsdybde: 650 mm, maks. platetykkelse stål: 15 mm, totalvekt: 1 700 kg, total lengde: 1 500 mm, total bredde: 650 mm, total høyde: 1 700 mm, effekt: 7,5 kW (10,20 hk), inngangsspenning: 220 V, inngangsstrøm: 26 A, inngangsfrekvens: 50 Hz, type innstrømsstrøm: trefaset, år for siste overhaling: 2023, Utstyr: fotfjernkontroll, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. Punching Tools Used punching machine by Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical Data (specifications without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g., Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control via foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 machine – including corresponding punching tools (see photos for details) Iodpfx Aox Dtp Rogmjal Important notes: – The stated price is for self-collection only. – Dismantling, loading, and transport are the sole responsibility and at the expense of the buyer. – Sale from used stock, without warranty or guarantee. Inspection by appointment possible. I am happy to answer further questions.

Tilstand: ny, Byggeår: 2022, ca. 100,16 lm, H: 250 cm, shelf load: 3000 kg, pallet racks, heavy-duty racks, high racks, industrial racking, racking available immediately from stock Data: - Height: approx. 250 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres - Load capacity: 3000 kg shelf load - Uprights galvanised - Beams 270 x 14 x 5 cm, T30 - Beams in orange - New stock BLT / PR25 - Manufactured in Europe & tested according to current DIN EN 15512 standard - 100% quality at the best price. Racking consists of: - 37 x uprights approx. 250 cm x 110 cm, disassembled - 144 x beams approx. 270 x 14 x 5 cm, T30 - 288 x safety pins - Levels: floor + 2 - 324 pallet spaces incl. floor level -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €8,690.00 net Iasdpfox Thf Uox Agmol plus legally applicable VAT You will receive an invoice with VAT shown separately. Pre-assembly of the frames can be carried out by us at a small additional cost of €12.50/net per unit. Transport: Delivery can be arranged by our partner hauliers on request; costs are dependent on your postal code. Assembly: Our trained personnel are available to assist you with the professional installation and dismantling of your warehouse equipment if required. Our recommendation: Let us know your requirements ... We are happy to assist you with your projects, from planning and ordering through to installation.

Tilstand: ny, Byggeår: 2024, ALZMETALL pillar drilling machine AB 34 iTRONIC Drilling capacity in steel: 34mm Spindle speeds: 100-1800 rpm Short spindle MK4 Isdpfx Agoiqyixsmsal Spindle stroke: 160mm Throat depth: 300mm Column diameter: 145mm Machine table usable surface: 615 x 430mm, with T-slots 2 x 14mm x 224mm Distance spindle-table min./max.: 138/688mm Machine table height adjustment via hand crank Feed rates: 0.1-0.2-0.3-0.4 mm/rev Machine height without options: 1865mm Net weight: 470 kg Standard equipment: - 7” TFT LCD display with touch function - Tapping device - Infinitely variable speed control - Spindle guard - Three separate buttons for clockwise – counterclockwise – stop - Mushroom-head emergency stop - Main switch - Clockwise and counterclockwise rotation - Control voltage 24 Volt - Protection class IP 54 - Motor insulation class “F” (155°) - Electromagnetic feed overload protection - Initial fill of machine oil Paint finish: DD textured paint Signal White RAL 9003, PANTONE 7545c, black Including the following options: - LED machine lamp Pos. 12 - Coolant system A Pos. 24 - Foot switch for tapping Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2025, maskin-/kjøretøynummer: Stock, lastekapasitet: 240 kg, egenvekt: 990 kg, byggehøyde: 1 910 mm, drivstofftype: elektrisk, total lengde: 1 520 mm, drivtype: Elektro, konstruksjonsbredde: 760 mm, arbeidshøyde: 5 500 mm, Sakseløfter Chassisnummer: Stock Tilstand: Ny maskin Teknisk tilstand: Ny Isdox S Tabopfx Agmoal Forhjulstype: Non Marking Forhjulsstørrelse: 255mm x 76mm Forhjul tilstand: Ny Bakhjulstype: Non Marking Bakhjulsstørrelse: 255mm x 76mm Bakhjul tilstand: Ny Batteri volt: 24V Batteri Ah: 100Ah Batteri produksjonsår: 2025 Batteri tilstand: Nytt

Tilstand: brukt, Byggeår: 2019, kontrollerprodusent: Sonstige, kontrollermodell: MAPPS IVB, Beskrivelse: Tekniske data: Maks. slipediameter: 350 mm Maks. slipelengde: 150 mm Slipehjul diameter: 25–180 mm Svingeområde slipehodespindel (maks.): 230° Slipehodespindel: Teknologi: Innvendig slipehodespindel Turtallsområde: 3–20.000 o/min Maks. effekt: 11 kW Slipehjulsfeste: HSK-A63 Borespindel: Teknologi: Borespindel Turtallsområde: 1.500–3.500 o/min Maks. effekt: 7,5 kW Verktøyfeste: HSK-A63 Emnespindel: Teknologi: Direkte drift Spennflate: Ø265 mm Maks. bordbelastning: 200 kg Emnespenning: Pneumatisk chuck Generelt: X/Z vandring: 965/532 mm Hurtiggang X/Z: 24/20 m/min Utstyr/Tilbehør: Veimålesystem: Direkte (glasslinjal) i X/Y Sponhåndtering: Magnetbåndtransportør Kjølemiddelstyring: KSS-system med papirbåndfilter og temperaturregulering Emnemåling: Måleprobe, Renishaw MP 250 med kalibreringsstasjon Verktøymagasin: 8 stasjoner (hver 4 for slipe- og boreverktøy) Avretter: Avretterhjul + enkornsdianant (Marposs) Innstillingsmodus: Elektronisk håndhjul Automatisering: Fanuc-robot M-20iA med magasinstocker (30 stasjoner Ø329 mm) Iajdpfx Agoxx Erajmol Slipeskyllekstraktor: Akamatsu HVS-100-CE 044 Ytterligere utstyr: Spindelkjøler, trafo

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2002, driftstimer: 10 539 h, lastekapasitet: 4 000 kg, løftehøyde: 6 500 mm, drivstofftype: gass, mastetype: simplex, byggehøyde: 4 030 mm, gaffelbærerbredde: 1 315 mm, gaffellengde: 1 600 mm, egenvekt: 7 550 kg, total lengde: 4 120 mm, drivtype: Treibgas, konstruksjonsbredde: 2 400 mm, Sideload forklift Load center: 800 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Super elastic Front tires size: 27x10-12 Rear tires type: Super elastic Rear tires size: 27x10-12 Description: In addition to this Baumann model, we have approximately 200 heavy duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Hire purchase and financing on attractive terms are always available. We also gladly buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this HX40/16/65. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom modifications for forklifts from 8 tons and up. We can also offer to list your vehicle for commission sale at our facility. Ijdpfxev U Erpj Agmjal Heater, full cab, Platform height: 850 mm

Byggeår: 2011, Tilstand: verkstedoverhalt (brukt), Nr. 2401 1 used double piston screen changer – backflush type Manufacturer: ECON Type: ESK 480-4B Year of manufacture: 2011 Screen block 1: 2 pistons, each with 2x Ø 123.5 mm Screen block 2: 2 pistons, each with 2x Ø 176.3 mm, with a screen area of 490 cm² Complete with: - Hydraulic unit - Siemens control system The screen changer is ready for demonstration and can be viewed on short notice by appointment. Iodpfxegbfwmj Agmjal Further screen changers / melt filters available from stock in Wuppertal: EREMA RS and Laserfilter Kreyenborg K-SWE / RS Ettlinger ECO BD Plast Alphatec Gneuss Brit-Ass

Tilstand: ny, Byggeår: 2024, Funksjonalitet: fullt funksjonell, bæreevne per konsollarme: 140 kg, hyllehøyde: 2 500 mm, total lengde: 3 150 mm, total bredde: 810 mm, total høyde: 2 500 mm, akselavstand: 1 030 mm, lastekapasitet per stativ: 560 kg, ca. 3,15 lfm. Cantilever Racking H: 250 cm 140 kg/Arm META Multistrong Details: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle spacing: 103 cm - BRAND NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arms adjustable in 70 mm increments - Levels: base + 4 storage levels (5 storage levels in total) Rack consists of: - 04 x uprights, incl. base, approx. 250 cm made of IPE120 - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm - incl. all necessary connecting elements and bolts -- Immediately Available -- Price: €1,525.00 net €1,814.75 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Ijdpsx Tgh Ijfx Agmsal Transport: Delivery is handled by our partner freight companies on request; costs depend on the postal code. Assembly: Our trained staff are available to assist you professionally with both the assembly and dismantling of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to assembly.

Tilstand: svært god (brukt), Byggeår: 2020, Funksjonalitet: fullt funksjonell, inngangsspenning: 230 V, Utstyr: belysning, fryser, Set: EPTA Costan / Carrier Top Freezer + AHT Miami 250 Deep Freezer Chest Freezer Freezer Plug-and-Play Multipurpose Deep Freezing Units Discount Store Costan EPTA / CARRIER Top Freezer 2580 G Modern solution for expanding deep-freeze capacity Plug-and-play refrigeration units Technical specifications – photo added Iodpjx Adawefx Agmeal The freezer unit serves as an extension of the chest freezer and saves space. Can be set up above the MIAMI 250. Used equipment – very good condition – tested and fully functional. REFRIGERANT – R290 Shipping costs depend on weight, volume and, most importantly, distance. For inquiries, the following information is needed: delivery address (postal code and name of location). Further details should be clarified by phone, so we ask that you contact us by phone to request transport costs and additional delivery terms. Our contact details can be found under the legal information of the seller. Cash payment on collection is possible. We sell and export worldwide. Due to our large stock capacity, we can deliver even larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices – VAT excluded. Opening hours Mon-Fri: 8:00-16:00 Sat: Closed

Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2025, maskin-/kjøretøynummer: Stock, lastekapasitet: 230 kg, egenvekt: 1 550 kg, byggehøyde: 1 990 mm, drivstofftype: elektrisk, total lengde: 1 885 mm, drivtype: Elektro, konstruksjonsbredde: 760 mm, arbeidshøyde: 7 800 mm, Sakseløfter Chassisnummer: Stock Tilstand: Nytt utstyr Teknisk tilstand: Ny Forhjulstype: Non Marking Forhjulstørrelse: 305 mm x 100 mm Forhjuls tilstand: Ny Bakhjulstype: Non Marking Bakhjulstørrelse: 305 mm x 100 mm Bakhjuls tilstand: Ny Batterivolt: 24V Batterikapasitet: 200Ah Batteriets produksjonsår: 2025 Iodpox S S U Defx Agmsal Batteriets tilstand: Ny

Byggeår: 2026, Tilstand: ny, Magnetseparator for chip conveying line Tube magnet with 4 magnetic plates (permanent magnet) Iedscqvhxepfx Agmeal Hinged door for easy removal of metal particles Tube diameter: 180 mm Immediately available Location: In stock at 54634 Bitburg

Tilstand: svært god (brukt), Byggeår: 2011, Funksjonalitet: fullt funksjonell, CNC Dual-Spindle Turning Center Control System: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel paths: X1 – Tool Turret I: 270 mm Y1 – Tool Turret I: 120 mm Z1 – Tool Turret I: 1200 mm X2 – Tool Turret II: 195 mm Y2 – Tool Turret II: 80 mm Z2 – Tool Turret II: 1200 mm X3 – Sub-spindle slide: 180 mm Z3 – Sub-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% DC): 40/48 kW Torque (100/40% DC): 570/680 Nm Speed range: 0–4000 rpm Bar capacity: 102 mm Draw tube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Sub-Spindle Integrated spindle motor ISM 76 Drive power (100/40% DC): 25/32 kW Torque (100/40% DC): 280/380 Nm Speed range: 0–5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Maximum power (100/40% DC): 10.9/14.2 kW Maximum torque (100/40% DC): 26/34 Nm Speed range: 40–10000 rpm Iaodpfowcd S Nex Agmjl Slide 2 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Maximum power (100/40% DC): 10.9/14.2 kW Maximum torque (100/40% DC): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X/Z-Axis: 30/45 m/min Tool resolution Z-Axis: 0.001° Feed force (40% DC) X/Z-Axis: 16/13 kN EQUIPMENT/ACCESSORIES - Short bar loader magazine IRCO ILS-RBK 100/16 - Various main spindle reduction tubes - NC-controlled workpiece pick-up device from both main and sub-spindle The device consists of NC-controlled * Horizontal axis * Swivel unit * Vertical axis * 2-jaw gripper with exchangeable gripper jaws - Conveyor belt for removal of workpieces from the machine - Coolant system 8/20 bar with immersion cooler - Chip conveyor - Oil mist extraction unit - Control cabinet cooling unit (up to 40°C) - Sub-spindle slide - Easy-Tool Monitor - 1 collet chuck for quick-change collet head size 100 for main spindle - 1 collet chuck for quick-change collet head size 100, Nova axis-fix for sub-spindle - Approx. 40 various quick-change collet heads size 100 (full stock) - Pneumatic change-over device, ø 100 mm - Approx. 50 various tool holders, static and driven (full stock) - Levelling elements - Documentation

Byggeår: 1996, Tilstand: verkstedoverhalt (brukt), Nr. 2590k 1 used compounding and pelletizing line, throughput up to 1,200 kg/h depending on material, consisting of: Twin-screw extruder THEYSOHN type TSK 90 Screws: 2x Ø 90 mm – 36 LD, co-rotating Segmented screws and barrel, water/medium cooled Screw speed up to 300 rpm Extruder drive 255 kW DC 1x side feeder extruder TSD 75 twin-screw with 3 kW drive 3x degassing ports 1x screen changer No. 1 type K-HS-Y, 176 mm screen, with hydraulics Iodpegbffvjfx Agmoal 1x melt pump with 22 kW drive 1x screen changer type K-SWE 180 RS backflush with hydraulics 1x strand die with 32 x Ø3.5 mm holes 1x strand cooling trough 620 x 5,000 mm 1x strand pelletizer SG 300, 11 kW drive Touchscreen control ResoTec / control cabinet Inspection/demonstration available at short notice by appointment. Additional compounding lines and accessories can be found in our machinery stock list online on our homepage.

Tilstand: ny, bæreevne per konsollarme: 650 kg, hyllehøyde: 4 000 mm, total lengde: 4 000 mm, total bredde: 1 480 mm, lastekapasitet per stativ: 1 950 kg, Data: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm incl. 8 cm front guide - Axle dimension: 130 cm - NEW immediately available from stock. - 650 kg load per arm - 1950 kg load per upright - Uprights in RAL7016. - Cantilever arms in RAL3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) The uprights from this racking set are pre-equipped free of charge for optional conversion to double-sided use. Advantages of a hooked-in cantilever arm, see images. Rack consists of: - 04 x uprights incl. base section, approx. 400 cm made of IPE180 - 12 x cantilever arms, approx. 120 cm made from 10 cm x 4 cm profile - incl. all necessary connectors and bolts Price: Iedpfox Tghhox Agmsal €1,995.00 net €2,374.05 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Transport: Delivery can be arranged by our partner forwarder on request, with costs depending on postal code. Assembly: Our trained staff are at your disposal for professional assembly and disassembly of your company equipment. Our recommendation: Let us know your requirements... We are happy to support you with your projects, from planning and order placement to installation.

Tilstand: brukt, Byggeår: 2000, Stock A-14 V567A/1650P er en høyhastighets lamineringsmaskin utviklet spesielt for emballasjeindustrien. Den benytter avansert teknologi for effektiv laminering av ulike materialer, noe som gir forbedret holdbarhet og beskyttelse av emballasjeproduktene. Format: 1640 x 1640 mm Utstyr: Mater: Kantinnmating (MIRUS) Arkinnmating via transportkjeder Pressehastighet: 3 000 sykluser/t Styring: Siemens PLC-styring / Micro Control System Limstasjon Lamineringsstasjon Tekniske detaljer Maks. størrelse: 1640 x 1640 mm Min. størrelse: 500 x 500 mm Arkvekt: Kartong 100 – 800 g/kvm Innmatingshøyde: 1 400 / 1 800 mm Bærekartong: Enkeltsidig bølgepapp, E-/B- og F-bølge, dobbeltsidig bølgepapp opptil 7 mm tykkelse, kartong fra 0,5 mm tykkelse Iedpjwcqwxjfx Agmeal

Byggeår: 2011, Tilstand: svært god (brukt), Dry air dryer FarragTech CARD 10 S with container and 2 x vacuum conveyors ICEVA GS-4mD Stock no.: 503577 Machine/Device type: Dry air dryer Manufacturer: FarragTech GmbH Model: CARD 10 S Year of manufacture: 2011 Container volume: 10 ltr. Throughput: 2 h/3.25 kg/80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Iasdpfxex Iduue Agmsl Accessories: 2x vacuum conveyors ICEVA GS-4mD

Tilstand: ny, Byggeår: 2026, Kündig PERFECT-3 1350-REdXi_LL/Bs Automatic Sander incl. structuring unit Robust 3-belt wide-belt sander for the highest demands. Constant working height thanks to upper section adjustment. Working width: 1350 mm Iaedpfxer Hr Dze Agmol Max. workpiece height: 205 mm (up to 18.5 kW main drive motor) Abrasive belt dimensions for 'R' and 'Ed-L': 1350 x 2000 mm Abrasive belt dimensions for 'Xi-L': 150 x 4700 mm Unit 'R' Contact Roller: - Grooved rubber contact roller, hardness 80 Sh - Infinitely adjustable contact roller height via touch screen - Motorised raising/lowering of the contact roller depending on unit selection - Increased belt speed Unit 'Ed-L' Diagonal Sanding Pad: - Electronic sanding pad with 22 mm segment width (pivoting special version), with variable edge pressure, automatic pressure control, and memory for the sanding pad segments - Infinitely variable sanding belt speed (with PLC memory) - Additional sanding pad insert Unit 'Xi-L' Cross Sanding Unit in Machine Frame: - Electronic sanding pad with 22 mm segment width, variable edge pressure, automatic pressure control, and memory for sanding pad segments - Cross sanding belt supported by lamella belt - Infinitely variable sanding belt speed (with PLC memory) PERFECT-3 1350-REdXi-LL Main motors: - 1st unit: 18.5 kW (25 HP) - 2nd unit: 11 kW (15 HP) - 3rd unit: 16 kW (MPM) (22 HP) - 400 V / 50 Hz Workpiece feed: - Fabric-reinforced rubber conveyor belt - Rubber-coated conveyor drive roller - Motor: 2.2 kW (3 HP) / 400 V / 50 Hz - Feed speed: infinitely variable 3 - 15 m/min Vacuum device: - Mounted on feed table - Additional perforation of conveyor belt across 200 mm width - Vacuum generator: 2.2 kW (3 HP) / 400 V / 50 Hz Abrasive belt cleaning: - Air knife for cleaning the sanding belts on units 'Ed-L' and 'Xi-L' - Operation-controlled, with extraction channels and driven by 1.1 kW (1.5 HP) blower / 400 V / 50 Hz Pressure elements: - Infeed: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm - Between units: rubber-coated pressure roller ⌀ 50 mm - Outfeed: rubber-coated pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 Sh 2. Diagonal sanding pad with lacquer equipment and air knife for belt cleaning 3. Cross sanding unit with lacquer equipment and air knife for belt cleaning Main motors: 18.5 + 11 + 16 kW / 400 V / 50 Hz Additional equipment: - W61: Structuring unit at outfeed - B10: Abralon structuring brush, Mink - W71: Additional quick-change shaft for brush 1350 - B12: Brass-plated steel wire brush 1350 - C10: LED package - A20: 5 x motorised control dampers (2x D=180 + 3 x D=150) Working width: 1350 mm Max. opening: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex-stock 54634 Bitburg - immediately available -

Byggeår: 2025, Tilstand: som ny (utstillingsmaskin), Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: S25Synthesi01, Stretch wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs, in several steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage up/down speed Buzzer at wrap start and cycle end stop Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push button for machine power-on as well as start, stop & reset function, according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Stepless turntable speed adjustment 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 rotations) F06 – Number of wraps at pallet top (1–10 rotations) F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for base & top wraps / up & down movement independently adjustable Iajdpex Ta R Njfx Agmol F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrap (upwards/downwards) F01-2 – Simple wrap (upwards or downwards only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with deactivation of the photoelectric sensor) F22/F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for corner protection placement F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button Optional features available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photoelectric sensor for black products Cutting device, etc. Additional units available from Ludwigsburg stock. Images may show options subject to a surcharge. Picture similar

Byggeår: 2003, Tilstand: verkstedoverhalt (brukt), Lager - Nr. 2651 1 used, partially overhauled underwater pelletizing system from 2023 Iaodpfsiyyf Isx Agmsl Throughput up to approx. 450 kg/h, depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic station A300 granulator incl. die plate and knife head, drive motor 4.4 kW By-pass system TVE 1000 ED pellet dryer drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW, 15 m³/h Heat exchanger Control system Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock in Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Tilstand: ny, Byggeår: 2026, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release saw blade system for professional users Article number: 5150063 DESCRIPTION Heavy professional design with high dead weight for maximum smooth running Especially smooth and precise operation thanks to torsion-free machine housing Large, solid grey cast iron saw table made from a single piece, tiltable from 0° to +45°, with ground and polished surface Patented table tilting device with handwheel and rack Quick-release saw blade tensioning Precision saw blade guidance Fast and precise cutting height adjustment via handwheel and rack with millimetre scale Safety switch for automatic shut-off when the door is opened Iedsvk Sfbopfx Agmsal Large cast parallel fence Supplied as standard with angle stop Table tilt via rack and handwheel TECHNICAL DATA Dimensions and Weights Length (product) approx. 1190mm Width/Depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction Connection Extraction port diameter: 2 x 120mm Work Table(s) Work table length: 830mm Work table width: 600mm Work table height: 830mm Work table tilt: 0 – 45° Work table tilt explanation: For safety reasons, a holding device/stop must be installed at angles over 20°, to prevent the wood from slipping! Electrical Data Connection voltage: 400V Mains frequency: 50Hz Output power: 4.1kW Cutting Ranges Max. cutting height at 90°: 400mm Max. cutting width with fence: 570mm Max. cutting width without fence: 610mm Saw Blade Saw blade speed(s): 1615m/min Flywheel diameter: 630mm Saw blade length: 4600mm Saw blade guidance: Precision guide above and below Location: Ex stock 54634 Bitburg - Immediately available -

Byggeår: 2012, Tilstand: svært god (brukt), Weima sold for 4-shaft shredder ZM 30 Screen size: 20/25 mm Iodpfehh Dpksx Agmsal Location: Ex stock 54634 Bitburg - immediately available -

Tilstand: ny, Byggeår: 2026, Weima Chipper / Shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times worldwide in woodworking operations, for example. The high quantity of these in-demand shredders ensures time-tested and reliable technology at the best price-to-performance ratio. The machines are characterized by their extremely robust construction, ensuring exceptional durability (even outdoors). Intuitive Operation Thanks to Siemens PLC Control with Touch Display To ensure the electronics are perfectly matched to the machine, we design, build, and wire our control cabinets in-house. We use only high-quality components, such as those from Siemens or Rittal. Intuitive touchscreen controls allow for rapid adjustments. Features such as setting the pusher cycle or stop enable high throughput rates. The integrated overload protection also prevents machine failures. No Material Bridging Thanks to Self-Cleaning Hopper Design The hopper serves several functions. It is used to load the material to be shredded—manually, mechanically, or via conveyor. The generous opening also allows for convenient filling of very large parts. Of critical importance for shredding is its special design, which is rounded at the front to effectively prevent material bridging. Even bulky materials are automatically cleared by the shredder. Optional hopper extensions and lids with gas struts are available if required. Durable Rotor Bearings Thanks to Offset Design A rotor bearing must be particularly robust due to the extreme loads during shredding operations. To prevent dust or foreign matter from entering, we have offset it from the machine frame. This also makes it very maintenance-friendly and easy to access. Iedpepdqzxjfx Agmsal Technical Data: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 – 125 - Power (kW): 22 - Number of blades: 54 - Available blade sizes (mm): 40 x 40 - Particle size (mm): - Suction nozzle (mm): 200 - Feed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second row of blades - Log spacer Location: Ex stock 54634 Bitburg - Immediately available -

Tilstand: ny, Byggeår: 2026, For sawing, milling, surface/thickness planing, and optional slot mortising in the most confined spaces. - High-precision sliding table made of anodized aluminum, various lengths - Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional stop flaps - Max. saw blade Ø 315 mm, tiltable from 90° to -45° - Large spindle tilting range from 90° to -45° to the rear - Four milling speeds up to 10,000 rpm, adjustable manually - Spindle with reversible rotation (right/left) - Heavily ribbed surface planer tables made from stress-relieved cast iron for decades of stability and flatness - 2-stage feed for thickness planing - Three independent industrial motors for continuous operation - With lockable main switch and motor protection switch - Fixed handwheels Dimensions and Weight Net weight approx.: 857 kg Surface Planer Surface table width: 410 mm Surface table length: 2000 mm Max. chip removal (surfacing): 5 mm Extraction Connection Extraction port diameter: 3 x 120 mm Extraction port diameter (blade guard): 60 mm Installation Information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement note: Dimensions account for maximum travel paths or usable lengths. Working Area Working area length: 1600 mm Working area width/depth: 1600 mm Working area note: Please add these dimensions to the space requirement to get the recommended free installation area for the machine. Thicknesser Thickness table length: 757 mm Thickness table width: 423 mm Working height min.: 3 mm Working height max.: 230 mm Max. chip removal (thicknessing): 5 mm Electrical Data Iajdeih Dxlopfx Agmol Supply voltage: 400 V Network frequency: 50 Hz Rated oper./duty cycle: S6 Duty cycle: 40% Drive motor output: 3 x 5.0 kW Sliding Table and Table Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. Milling Tool Diameter Max. tool diameter below table: 210 mm Max. tool diameter below table at 45°: 150 mm Max. tool diameter for tenoning: 275 mm Planer Cutterblock Cutterblock type: TERSA Cutterblock diameter: 87 mm Number of knives: 4 Cutterblock speed: 5200 rpm Circular Saw Unit Cutting length: 2600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of the blade: 3260 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade protrusion at 90°: 100 mm Max. saw blade protrusion at 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade note: with scoring unit (Main) saw blade speed: 4000 rpm Feed Feed speed: 6 – 12 m/min Location: In stock at 54634 Bitburg - Immediately available -