Kjøp brukt Scoop (259)

Tilstand: brukt, kjørelengde: 1 400 km, effekt: 18 kW (24,47 hk), første registrering: 01/2022, drivstofftype: diesel, totalvekt: 3 300 kg, farge: gul, girtype: mekanisk, fjæring: annen, driftstimer: 1 400 h, Utstyr: firehjulsdrift,

Tilstand: brukt, kjørelengde: 1 400 km, effekt: 18 kW (24,47 hk), første registrering: 01/2022, drivstofftype: diesel, totalvekt: 3 300 kg, farge: gul, girtype: mekanisk, fjæring: annen, driftstimer: 1 400 h, Utstyr: firehjulsdrift,

Tilstand: brukt, MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1 Manufactured by MAIR SCOPE OF SUPPLY 1 Loading table equipped with: - Motorized sling loader for loading complete bundles - Lateral chain conveyor for feeding tubes individually - Upper support with vertical adjustment (to prevent double feeding when working with small diameters) - Length stop and tube feeder 2 TRA3000 cutting machine with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for accurate positioning of cutting heads - Centralized tube transport system with adjustable production cycle 3 RA1 individual collecting cradle with: - Independent cradles for collecting cut tubes Ibjdjymax Eepfx Ac Uec - Lateral dividers between cradles to adapt the cradle length to tube length - Motorized endless belts for collecting soft tubes 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine, including photoelectric barriers and an emergency line Note: The owner installed safety barriers so the machine complies with “safety conformity” regulations. TECHNICAL SPECIFICATIONS Manufacturer: MAIR RESEARCH Model: TRA 3000/7/7/CAR +RA1 Annual maintenance: performed by MAIR Spain Maximum input tube length: 7000 mm Bundle loader: 3 tons Maximum loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (Height x Width): 12x16-60x40 mm (see note) Min.-Max. wall thickness: 0.8 – 4.0 mm (according to yield strength limits) Cut lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disk diameter: 300 mm Voltage: 380 / 50 V/Hz, 3-phase Compressed air: Must be supplied filtered and lubricated at 6 bar Total installed power: Approx. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Annual maintenance: performed by MAIR Maximum input tube length: 7000 mm Bundle loader: 3 tons Max. loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (height x width): 12x16-60x40 mm (see note) Min.-Max. wall thickness: 0.8 – 4.0 mm (according to yield strength) Cut lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disk diameter: 300 mm Voltage: 380/50 V/Hz, 3-phase Compressed air: Must be supplied filtered and lubricated at 6 bar Total installed power: Approx. 21kW – 50Amp

Tilstand: nesten som ny (brukt), Byggeår: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 flat grinding machine, year of manufacture 2016, in very good, thoroughly overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Specifications: Ibsdjy Naw Ijpfx Ac Usc Year of manufacture: 2000 Technical details: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size (mm): 500 x 200 Max. grinding wheel dimensions (mm): 225 (250) x 25 x 51 Distance table/spindle center (mm): max. 400 Table longitudinal feed, oscillating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive, speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approx. machine weight: 2.0 t Accessories and Features: Magnetic chuck Coolant system Machine mounts Grinding wheel About the Machine: We offer a flat grinding machine Jung Supromatic JF 520, year 2016, in very good condition. The machine is, of course, fully operational and has only about 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs with low vibration. This newer generation of surface grinding machines is extremely user-friendly and enables the production of surfaces with a very low Rz value. Take the opportunity to inspect this machine on site under power and see its condition for yourself. What Has Been Overhauled Mechanical scope of work: - General mechanical overhaul - Hydraulics - Feed mechanisms - Lubrication - Cross and vertical adjustment - Grinding spindle - Dressing unit - Painting in new machine quality Geometric scope of work: - Guideway grinding at manufacturer's site (optional) - Scraping of guideways - Column pull, measurement, possible scraping/grinding, re-fitting with new gibs, inspection and patterning of guideways - Setting cross-hatch pattern on the spindle head - Aligning the dresser - Regrinding the table and the magnet - Machine acceptance according to manufacturer's inspection sheet Electrical scope of work: - Renewal of the complete electrical system, all limit switches and buttons - Conversion of the X-axis from cam switch to non-contact limit switches - New control cabinet - RSF position display (2- or 3-axis display) - Holding force control for 24V or EP magnetic chuck - Control system modernization - New auxiliary control cabinet (operator console upper right) - Thyristor control for grinding spindle drive - Manual cylindrical dressing with head dresser or side dresser (for Diaform operation)

Tilstand: svært god (brukt), Byggeår: 2018, EMCO Concept MILL 55 Year of manufacture: 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training using various industry-standard controllers. Machine supplied complete with full enclosure and safety devices in accordance with CE regulations, infinitely variable main drive, automatic referencing, machine lamp, electrical and mechanical provisions for automation, PC interface card, PC-to-machine connection cable, data carrier with machine parameters, operating tool set, operation manual with spare parts list. Iedpfx Acowkpzlj Uebc The interchangeable control system Unique to the Concept series is the interchangeable control system, which can be integrated into all Concept machines. Users can be trained on a single machine with all commonly used industrial CNC controls. Currently, up to eight different controls can be learned. The result: CNC technicians are flexibly deployable. This is a decisive advantage for both professionals and companies. Working area • Travel in X-axis: 190 mm • Travel in Y-axis: 140 mm • Travel in Z-axis: 260 mm • Min. distance spindle nose – table: 77 mm • Max. distance spindle nose – table: 337 mm Milling table • Table dimensions (L x W): 420 x 125 mm • T-slots: number, width, spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling spindle drive • Speed range: 150 – 3,500 rpm • Power of three-phase asynchronous motor: 0.75 kW • Spindle torque: 3.7 Nm Axes • Feed rate: 0 – 2 m/min • Max. feed force X/Y: 800 N • Max. feed force Z: 1,000 N • Mean positioning deviation to VDI 3441 in X/Y: 0.008 mm • Mean positioning deviation to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection via directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery: Emco Concept Mill 55 with tool changer Cables Easy2Operate WinNC Sinumerik Operate Base frame Leveling elements I/O extension Pneumatic extension Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Tilstand: ny, Byggeår: 2024, Fiber Laser Cutting System FLV-3015-CT-6022 3kW / VF1530-3000W Technical Parameters - Maximum sheet dimensions: 3000 x 1500 mm - Maximum profile height: 220 mm - Maximum profile length: 6000 mm - X and Y axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5G - Power output: 3.0 kW - Source brand: Choice of Raycus or MAX Photonics - Power supply: ~3x400 V 50 Hz Cutting Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminium: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Rotator for Profile Cutting The machine is equipped with a rotator for profile cutting. - Maximum length of profile to be processed: 6000 mm - Profile clamping bracket diameter: 220 mm Automatic lubrication system for axis guides. Convenient Operation Loading of heavy sheets is facilitated by transport balls embedded in the table top, ensuring smooth sliding during loading. Picking up small finished parts is also much easier thanks to drawers located under the machine, which can be accessed by pulling on a practical handle. RayTools Cutting Head with Autofocus Otinus Protect (optional*) This product offers individual protection for your laser source. With this service, you can ensure the work continuity of your business. We secure your operations so you can complete orders on schedule. Voltage Stabiliser (optional*) Control Panel The computer operates on Windows 10, equipped with CypCut software for processing, supporting functions such as design, file import/export, and workflow optimization. All installed programs come with lifetime licenses. The machine is supplied with a wireless controller. Professional Support We ensure continuous communication with our customers. That is why, with the purchase of a machine, we provide an hourly package of professional support from Otinus technicians. Otinus Academy Learning Software Upon purchasing this machine, you receive one-year access to online courses, allowing you to seamlessly onboard new staff or refresh knowledge from prior training! Scope of Supply - Three-day training and machine installation - Days 1 and 2: up to 8 hours each – commissioning and control system training - Day 3: up to 8 hours – independent operation with supervision from our technician, including the ability to program specific parts. Iedpfxephpi Ej Ac Uebc - Consultation from our specialists - By phone: 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months - Online: 7:30 to 14:30 (Mon-Fri) – an 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally, you receive:

Tilstand: som ny (utstillingsmaskin), Byggeår: 2022, Transnorm Merge Conveyor 45° 1400-1050-800 RA2304 Exhibition piece Manufacturer: Transnorm Year of manufacture: 2022 Infeed angle: 45° Isdoud Dzvspfx Ac Uobc Length (center): 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/outside width (NB): 1050 mm Conveying speed: 0.717 m/s Voltage: 230/400 V Power: 1.5 kW Sidewall height: 300 mm Scope of delivery: with motor and side guide (optional on request) Options: - Supports - Frequency inverter for stepless speed control Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Just reach out to us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Tilstand: god (brukt), Byggeår: 2002, TRAUB TNL 12/7 CNC Swiss-Type Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle travel: 130 / 80 mm Ibsdpfst E Dbyox Ac Uec Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of live tools (turrets): 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not exhaustive): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is provided regarding the accuracy, completeness, or timeliness of the information.

Tilstand: brukt, Byggeår: 2022, Knapp roller conveyor accumulation conveyor 510-510-450 RA2386 Manufacturer: Knapp Direction of travel: bi-directional Roller width (RW): 450 mm Nominal/Outer width (NW): 510 mm Length: 510 mm Roller diameter: 50 mm Roller pitch: 60 mm Frame height: 90 mm Roller conveyor motor: Interroll EC300 24V Conveying speed: Adjustable up to 1.25 m/s with Interroll EC 300 Scope of delivery: without support stands, including photoelectric sensor Options available: - Support stands - Side guides Ibedpfxjv Ntd No Ac Ujc Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailor-made, professional advice, please contact us directly. Feel free to reach us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Tilstand: brukt, Byggeår: 2022, Knapp Roller Conveyor 540-510-450 RA2384 Manufacturer: Knapp Direction of travel: bidirectional Ijdpfxjv Ntdvs Ac Uobc Roller width (RW): 450 mm Nominal/External width (NW): 510 mm Length: 540 mm Roller diameter: 50 mm Roller pitch: 60 mm Frame height: 90 mm Conveyor motor: Interroll EC300 24V Conveyor speed: infinitely adjustable up to 1.25 m/s with Interroll EC 300 Scope of delivery: without supports, including photoelectric sensor Optional accessories: - Supports - Side guides Prices quoted are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please feel free to contact us directly. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Tilstand: brukt, Byggeår: 2022, Knapp Accumulation Roller Conveyor 600-510-450 RA2385 Manufacturer: Knapp Direction of travel: bi-directional Roller width (RW): 450 mm Nominal/outer width (NW): 510 mm Length: 600 mm Roller diameter: 50 mm Roller pitch: 60 mm Frame height: 90 mm Roller conveyor motor: Interroll EC300 24V Conveying speed: steplessly adjustable up to 1.25 m/s with Interroll EC 300 Scope of delivery: without supports, including light barrier Optionally available: Supports Side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailor-made, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics. Ibedpfxsv Ntd Ae Ac Uec

Tilstand: brukt, Byggeår: 2022, Knapp Roller Conveyor 570-510-450 RA2383 Manufacturer: Knapp Ibodpfev I Hq Tjx Ac Ujc Direction of travel: bidirectional Roller width (RW): 450 mm Nominal/outer width (NW): 510 mm Length: 570 mm Roller diameter: 50 mm Roller pitch: 60 mm Frame height: 90 mm Conveyor motor: Interroll EC300 24V Conveying speed: adjustable up to 1.25 m/s with Interroll EC 300 Scope of delivery: without supports, including photoelectric sensor Options available: - Supports - Side guides Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please contact us directly. Get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Tilstand: brukt, Byggeår: 1995, Transnorm Belt Curve Conveyor 90° Helix Spiral Left 980-800 IR600 RA2044 Technical Data Manufacturer: Transnorm Ibodpfxsk Nt Rij Ac Ujc Type: Belt Curve 90° Left Year of Manufacture: 1995 Angle: 90° Direction of Travel: Left Inner Radius (IR): 600 mm Usable Width (NUB): 800 mm Nominal/Outer Width (NB): 980 mm Incline: 180 mm / 90°, 720 mm / 360° Conveying Speed (m/s): Infinitely adjustable between 0.0117 and 0.5167 via frequency inverter Electrical Data: 1.5 kW / S1, 380-500 V Scope of Delivery: without supports and side guides (please enquire if required) incl. frequency inverter new belt Optional: supports side guides Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg For a tailored and professional consultation, please do not hesitate to contact us. Reach us by phone or email—we are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Tilstand: brukt, Byggeår: 2001, Lippert belt conveyor incline band GF 4360-550-400 RA1606 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor with a MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can optionally be installed for an additional charge. Support legs are not included in the scope of delivery but can be supplied upon request. The shown images of the conveyor system were taken while still installed in a logistics center. Technical data: Conveying length (NL): 4,360 mm (infeed + incline belt with curve and upper straight section) Frame width (NB): 550 mm Belt width (GuB): 400 mm Construction height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: type XVT-2128 Year of construction: 2001 Incline / Decline: adjustable Optionally available: Support legs Side guide single-sided and double-sided Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Ibsdpfx Acjk Abd No Uoc For individual, professional advice, simply contact us. Feel free to reach us by phone or email. We are happy to support you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Tilstand: brukt, Byggeår: 2001, Transnorm belt curve conveyor right-hand GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW gear motor. Supports are not included in the scope of delivery but are available optionally on request. Belt curves are frequently used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Tapered drums and a specially developed belt guiding system ensure the highest possible running smoothness. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (central radius, NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: Side guides on both sides included Optionally available: - Supports - Side guides, single-sided or double-sided Ibodpfjk Abuisx Ac Uoc Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert consultation, please feel free to contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics.

Tilstand: brukt, Byggeår: 2001, Transnorm Belt Curve Conveyor Left GKF 85°-775-550 IR600 RA1658 The Transnorm belt curve is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are widely used in intralogistics for the in-plant conveyance of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no issue. Tapered drums and a specially developed belt guidance system ensure the highest possible running smoothness. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 1703 mm Frame width (NB): 775 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 85° degrees Rise: 175 mm / 85° degrees = 741.2 mm / revolution (360°) Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Options available: • Support stands • Side guide (one-sided or double-sided) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Ijdpok Abfbsfx Ac Ujbc For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor Folding Band GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor featuring a MOVIMOT frequency inverter for speed regulation. Side guides and/or light barriers can be installed upon request for an additional charge. Supports are not included in the scope of delivery but are available as an option upon request. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Conveyor length (NL): 1360 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Construction height (BH): 105 mm Belt height: 550 mm Base dimensions: 1270x1180 mm Total height: 1300 mm Tipping height difference: 300 mm Conveying speed (v m/s): 0.05–1.5 m/s Drive unit: SEW geared motor S37 DT71D4/MM03/BW1 Electrical data: Belt conveyor motor: 50 Hz V380–500, kW 0.075 / 0.37 / S1 Tipping motor: 50Hz V220/400, kW 0.55 / S1 Return roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Ibsdpfx Acok Abgvo Uec Belt: Type XVT-2128 Year of manufacture: 2001 Optional accessories: Supports Single or double-sided side guides Net prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, expert advice, please do not hesitate to contact us directly. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Tilstand: ny, Funksjonalitet: fullt funksjonell, totalvekt: 835 kg, egenvekt: 835 kg, driftsvekt: 835 kg, Byggeår: 2026, HYDRAULIC HAMMER SHB100 The STEELITE hydraulic hammers in the medium size class impress with high impact force, robust design, and reliable performance for daily construction site use. Ideally suited for demolition, civil engineering, road construction, and recycling tasks, they offer an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-dampened design ensures high working comfort and reduces stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact force with a compact design - Very good spare parts availability - Various mountings possible - Ready for immediate use SCOPE OF DELIVERY - SHB100 hydraulic hammer - 1 x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 835 kg - Oil flow: 80–110 l/min - Max. operating pressure: 210 bar - Chisel diameter: 100 mm - Automatic lubrication system - Equipment damping - Suitable for carriers: 10 – 14 t Advantages of the STEELITE hydraulic hammers Iedpfey St Hujx Ac Usbc - High demolition performance with smooth running characteristics - Efficient power transfer for economical operation - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal ratio of performance, weight, and durability

Tilstand: brukt, Byggeår: 2007, Gebhardt belt conveyor system 7733-610-500 with pre-feed belt 900-610-500 RA1030 The Gebhardt belt conveyor system, manufactured in 2007, is in very good used condition. It is equipped with a SEW brand motor. The conveyor can be operated in both upward and downward directions. The incline angle is freely adjustable, and the upper curve and supports can be customized. Please note that supports are not included in the scope of delivery but are available as an option. Includes: 1 x pre-feed belt, 1 x main belt, 1 x curved section, 1 x straight section Technical Data: Ibodpfx Aek Aa Avjc Uec Manufacturer: Gebhardt Type: 300.10 Position: GE 12.05 Year of manufacture: 2007 Condition: very good (used) Motor: fully functional Main belt length: 7449 mm (incl. upper curved section) Nominal/outside width (NB): 610 mm Belt width (GB): 500 mm Belt type: lightly textured Pre-feed belt length: 900 mm Curved section length: 375 mm Upper straight section length: 1293 mm Belt type: smooth Belt height: H 1 lower +2300 mm, H 2 upper 4320 mm Height difference: +2020 mm, incline/decline 19° or 34° Motor type: SEW gear motor, central drive with tensioning station Motor power: 0.37 kW/S1, 50 Hz, 2.00/1.15 A Conveying speed: 0.3 m/s Scope of delivery: without supports (please inquire if required) Optional: Supports Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional consultation, please do not hesitate to contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, The team of Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Tilstand: brukt, Byggeår: 2022, Knapp Roller Conveyor Alignment Conveyor – Angled Roller Conveyor 600-510-450 RA2387 Manufacturer: Knapp Direction of travel: bi-directional Roller width (RB): 450 mm Nominal/Outer width (NB): 510 mm Length: 600 mm Roller diameter: 50 mm Roller pitch: 60 mm Frame height: 90 mm Conveyor drive motor: Interroll EC300 24V Conveying speed: adjustable up to 1.25 m/s with Interroll EC 300 Scope of delivery: supplied without supports, including photoelectric sensor Optional accessories available: - Supports - Side guides Prices are net plus VAT ex central warehouse of Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional consultation, simply contact us. Reach out to us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics Ibodev Ntfaepfx Ac Ujc

Tilstand: brukt, Knapp roller conveyor transfer pusher transfer belt-driven pusher 90° 750-485-425 RA1889 Manufacturer: Knapp Direction of travel: bidirectional Roller width (RW): 425 mm Nominal/outer width (NW): 485 mm Length: 750 mm Roller diameter: 50 mm Roller pitch: 75 mm Transfer belt pusher motor: SEW motor 3x 300-500V, 0.25kW Roller conveyor motor: Interroll EC300 Frame height: 170 mm Conveying speed: adjustable up to 1.25 m/s with Interroll EC300 Pneumatic lifting of the transfer belt Scope of delivery: without supports, including end stop Optionally available: - Supports - Side guide, single or double-sided Ijdpfxev S Npgs Ac Usbc Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, please contact us directly. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and expert partner for intralogistics

Tilstand: brukt, Byggeår: 1999, Transnorm Belt Curve Conveyor Left GKF 90°-775-600 IR600 RA2008 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curve conveyors are frequently used in intralogistics for internal transportation of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are easily achievable. Tapered drums and a specifically designed belt guidance system ensure maximum running smoothness. Technical Data: Type designation: Belt Curve Conveyor TS 1600-105 Frame width (NB): 775 mm Belt width (GuB): 600 mm Conveyor height (BH): 190 mm Inner radius (IR): 600 mm Conveyor angle: 90° Inclination: 191 mm / 90° = 764 mm / revolution (360°) Support legs: optionally available Conveying speed (v m/s): Please contact us Drive: SEW gear motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see photos) Year of manufacture: 1999 Optionally available: Supports Side guides, single-sided and double-sided Iedsk Abtpepfx Ac Usbc Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Contact us by phone or email. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Tilstand: brukt, Schulz roller curve conveyor, right-hand, with straight section and 90° pusher 450-390 IR795+650-450-390 RA1200 Ibjdpfxek Aa Ils Ac Uec Roller curve: Angle: 90° right Usable width (UB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Mean radius: 1,000 mm Straight section: Conveyor length (CL): 650 mm Usable width (UB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Roller pitch: 75 mm Drive motor: 0.25 kW Conveying speed: v = 0.3 m/sec Drive: round belt, curve + straight section 2nd electrical drive for chain pusher Shipping dimensions: LxWxH: 2100 x 700 x 800 mm Scope of delivery: includes double-sided side guide, without supports (supports available on request) Options available: 2 double supports, height-adjustable, top of roller +/-100 mm Frequency inverter for stepless speed adjustment Price plus VAT, ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, expert advice, please contact us directly by phone or email. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 22000-650-500 RA1361 The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW motor and MOVIMOT inverter for speed control. Side guides and/or light barriers can be fitted on request at an additional cost. Supports are not included in the scope of delivery but can be supplied optionally on request. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Ibsdpfx Aek Aa S Njc Uoc Length (NL): 22,000 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Total height (BH): 105 mm Support feet: optionally available Conveyor speed (v m/s): infinitely adjustable up and down via frequency inverter Drive: SEW Gear Motor S37 DT 80 N4 MM07 Electrical Data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum (AT): Ø = 81 mm Belt return roller: Ø = 50 mm Belt: Type NNT 10 ENBU Year of construction: 2001 Optional accessories: Supports Side guides, single-sided and double-sided Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please feel free to contact us directly. You can reach us easily by phone or email. We are happy to assist with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Tilstand: brukt, Budde Roller Curve, right or left 90° with through-feed 2955-670-620 IR795 RA1687 Manufacturer: Budde Direction of travel: 90° right-hand or left-hand Roller width (RB): 620 mm, tapered, with plastic coating Nominal/outside width (NB): 670 mm Internal radius (IR): 795 mm Length: 295 mm Frame height: 125 mm Ibsdpfxok Abf He Ac Uec Overall height including motor: 380 mm Currently set to a height of 700 mm Adjustable height Roller pitch: 75 to 120 mm Motor: MOVI-Mot 3x300-500V 0.37 kW, 1400 rpm max Gear motor: SEW R17 DRS71S4/MM03 Conveying speed: infinitely adjustable between 0.11 and 0.7 m/s with frequency inverter Scope of delivery: includes 3 adjustable supports, 3 photoelectric sensors, and one roller pusher For personalized, professional advice, please feel free to contact us. Simply get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics