MAIR multihode rørkutter TRA3000/7/7/CAR + RA1

MAIR MULTIHEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR ...

MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1

Manufactured by MAIR

SCOPE OF SUPPLY

1 Loading table equipped with:
- Motorized sling loader for loading complete bundles
- Lateral chain conveyor for feeding tubes individually
Kedpfx Agjymax Estowu
- Upper support with vertical adjustment (to prevent double feeding when working with small diameters)
- Length stop and tube feeder

2 TRA3000 cutting machine with:
- 7 independent cutting heads
- All cutting heads can be lifted independently
- Linear guide with scale for accurate positioning of cutting heads
- Centralized tube transport system with adjustable production cycle

3 RA1 individual collecting cradle with:
- Independent cradles for collecting cut tubes
- Lateral dividers between cradles to adapt the cradle length to tube length
- Motorized endless belts for collecting soft tubes

4 Main electrical cabinet and operator control panel

5 Safety barriers around the machine, including photoelectric barriers and an emergency line

Note: The owner installed safety barriers so the machine complies with “safety conformity” regulations.

TECHNICAL SPECIFICATIONS

Manufacturer: MAIR RESEARCH
Model: TRA 3000/7/7/CAR +RA1
Annual maintenance: performed by MAIR Spain
Maximum input tube length: 7000 mm
Bundle loader: 3 tons
Maximum loading capacity: 3000 kg
Round tubes (external Ø): 12-60 mm
Square tubes (height x width): 12x12-50x50 mm (see note)
Rectangular tubes (Height x Width): 12x16-60x40 mm (see note)
Min.-Max. wall thickness: 0.8 – 4.0 mm (according to yield strength limits)
Cut lengths: 330-6900 mm
Maximum straightness tolerance: 1 mm/m
Number of cutting heads: 7
Motor power: 2.2 kW
Cutting disk diameter: 300 mm
Voltage: 380 / 50 V/Hz, 3-phase
Compressed air: Must be supplied filtered and lubricated at 6 bar
Total installed power: Approx. 21kW – 50Amp
Manufacturer: MAIR
Model: TRA 3000/7/7/CAR +RA1
Annual maintenance: performed by MAIR
Maximum input tube length: 7000 mm
Bundle loader: 3 tons
Max. loading capacity: 3000 kg
Round tubes (external Ø): 12-60 mm
Square tubes (height x width): 12x12-50x50 mm (see note)
Rectangular tubes (height x width): 12x16-60x40 mm (see note)
Min.-Max. wall thickness: 0.8 – 4.0 mm (according to yield strength)
Cut lengths: 330-6900 mm
Maximum straightness tolerance: 1 mm/m
Number of cutting heads: 7
Motor power: 2.2 kW
Cutting disk diameter: 300 mm
Voltage: 380/50 V/Hz, 3-phase
Compressed air: Must be supplied filtered and lubricated at 6 bar
Total installed power: Approx. 21kW – 50Amp

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.