Kjøp brukt Scoop (413)

Byggeår: 2010, Tilstand: klar til bruk (brukt), antall aksler: 3, Dette 3-aksede Mitutoyo Quick Scope QS-250 Z ble produsert i 2010 og leveres med joystick-boks, diverse festeører og profilskinner for fleksible oppstillingsmuligheter. Den har en MAG1-festeanordning samt korte og lange fjærklemmer for presise optiske måleoppgaver. Benytt deg av muligheten til å kjøpe dette optiske måleinstrumentet Mitutoyo Quick Scope QS-250 Z. Kontakt oss for mer informasjon om dette utstyret. Ekstrautstyr: • Joystick-boks • Pinol • Fjærbelastet pinol • Spennpratser: 35-37, 39-41, 55-57 • Klemmeskinne med endetilkobling • Klemmeskinne uten endetilkobling • Koblingsstykker med spor for tilkobling • MAG1-festebrakett • Fjærklemme 15° (kort) • Fjærklemme 15° (lang) • Klemmholder med gjenger • 30 mm sylinderstift • Føringskam 40/10 mm kun med langsgående spor • 120° prisme med fjærklemme • Maksimal måleavvik i XY-planet er 2,5 + 0,006 µm • Måleområde (X/Y/Z): 200 x 250 x 100 mm • Oppløsning: 0,5 µm (0,0005 mm) Djdjx D D Abjpfx Aayowb • Nøyaktighet XY: (2,5 + 0,006 µm) • Nøyaktighet Z: (5 + 0,006 µm)

Tilstand: god (brukt), akselkonfigurasjon: 4x4, driftstimer: 761 h, Shibaura SP1440 3-sylindret dieselmotor 0,9 liters motorkapasitet 4x4 / firehjulsdrift 9 gir forover / 3 gir bakover Dedpozxh I Rjfx Aayowb Bakre kraftuttak 540 o/min Kompakt og manøvrerbar Utstyrt med førerhus Japansk kvalitet og solid teknologi transport-/skuffe inkludert slepet strømaskin inkludert varme 5750 €

Tilstand: brukt, Werth Type: Werth SCOPE-CHECK 400 3D-koordinatmålemaskin Tekniske data: Måleområde (X x Y x Z): 400 x 200 x 200 [mm] Arbeidsbord med integrert elektrisk skap: 1600 x 950 x 780 [mm] Maks. vekt på bordet: 20 [kg] Driftsforhold: * Relativ luftfuktighet: 40–70 [%] * Temperatur: 10–40 [°C] Målenøyaktighet (20 °C, 8 kg, forstørrelse 5X, oppløsning 0,5 mikron) På bordet, E1 = 1,8 + L/120; E2 = 2,0 + L/150 Alle posisjoner, E1 = 2,5 + L/120; E2 = 2,9 + L/100; E3 = 4,5 + L/75 Inkrementelle måleskalaer Kulemorskrue med servomotor Optisk forstørrelse (video): 0,5X til 5X Optisk felt (video): 13 x 10 [mm] til 1,3 x 1 [mm] Bevegelse på lineært føringssystem med kule Dodszh Dq Hspfx Aayswb Kombinerbar belysning: diascopisk, episcopisk, ringformet LED/aksial Spenning: 230 [V] Frekvens: 50 [Hz] Effekt: 2 [kW] Vekt: 300 [kg] Tilbehør CN Belysningsstyring via programvare Video-sensor IP for deteksjon av målekontur (skjermvisning) Elektronisk styring for bordbevegelse Manuell styring for bord via joystick Forberedelse for mekanisk berøringstaster Kalibrering, 3D-måling, programvare for kommunikasjon med berøringstaster Programvare: WinWerth v8.40 Leveringsomfang: (Werth-koordinatmålemaskin med tilbehør som vist på bildet) Tilstand: brukt (Endringer og feil i de tekniske dataene og spesifikasjonene kan forekomme!) Vennligst forespør om transportmuligheter før kjøp. Vi svarer gjerne på andre spørsmål over telefon.

Byggeår: 2016, Tilstand: klar til bruk (brukt), antall aksler: 3, Denne 3-aksede OGP SmartScope Vantage 450 ble produsert i 2016. Den har et arbeidsområde på 450 x 450 x 250 mm og er utstyrt med et Renishaw SP25M skanningsprobesett og Telestar Plus TTL-lasersensor. Maskinen leveres med en 24" LCD-skjerm og variert tilbehør for utvidet funksjonalitet. Hvis du er på utkikk etter avanserte optiske målemuligheter, bør du vurdere OGP SmartScope Vantage 450 som vi har for salg. Kontakt oss for mer informasjon. • Arbeidsområde (X/Y/Z): 450 x 450 x 250 mm • Programvare: MeasureMind 3D Multisensor; ZONE3 (CAD-basert) • Probesystem: Renishaw SP25M skanningsprobe-kit • Sensor: Telestar Plus TTL-lasersensor • Strømforsyning: 230 VAC, 50/60 Hz, 4,0 A • Operativsystem: Windows 7 (kan oppgraderes til Windows 10) Ekstrautstyr • 24" LCD-skjermer (x4) • Adapter for probesystem • Sonic SD-elektronikk Dodpfx Aey Ry Iijayewb • Kinematikk for probevekslerrack • Laser-kalibreringsartifakt • Offline-PC (ZONE3) • Standardbord (1000 x 800 x 750 mm) • Støvbeskyttelseshette

Tilstand: god (brukt), Byggeår: 2014, driftstimer: 5 189 h, drivstofftype: diesel, GENIE S-45 teleskopisk lift / sakselift 4x4 DEUTZ DIESEL 5189 timer, 15,7 m arbeidshøyde, 2014. Video kan sendes via WhatsApp. Vi har et kontinuerlig lager, se nettsiden. Prisene er eksklusive Nuland. Van de Wert Trading B.V. har et varierende lager av maskiner, lastebiler, tilhengere og tilbehør. Alle våre leveranser skjer til handelspriser og i «som den er»-tilstand, uten garantier (se våre generelle vilkår). Du kan avtale et uforpliktende møte for å se og/eller prøvekjøre. Ring oss på forhånd, da vi ikke alltid er til stede. Van de Wert Trading B.V. Bedrijfsstraat 3 Dodpfezxq Rzjx Aayewb 5391 LR Nuland

Tilstand: svært god (brukt), Byggeår: 2014, driftstimer: 4 045 h, mastetype: teleskopisk, drivstofftype: diesel, Produksjonsår: 2014 Drift: Hjul Totalvekt: 7 756 kg Mål (L x B x H): 891 x 247 x 231 cm Løftekapasitet: 230 kg Arbeidshøyde: 1 609 cm Teknisk tilstand: meget god Visuell tilstand: meget god Kontakt Ton for mer informasjon. Produsent: JLG Dwjdpfxsy S Uqhj Aayjb Type: 460SJ Produksjonsår: 2014 Vekt: 7 756 KG Timer: 4 045 Drift: Diesel 4x4 Produktnummer: 25062 Plattformhøyde: 14,09 m Arbeidshøyde: 16,09 m Plattformmål: 183x76 cm Rekkevidde: 12,40 m Totale mål LxBxH: 891x247x231 cm Maks. plattformbelastning: 230 KG Maskinen er i god teknisk stand. Inkl. dokumenter og CE-sertifikat. Pris: € 18.950,- ekskl. mva, tilgjengelig fra vår lokasjon i Hedel, Nederland. Levering mulig mot pristillegg. Nøkkelord: Løfteplattform Sakselift Teleskoplift Knekkarmslift Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Sakselift Bomlift Knekkarmplattform Arbeidsplattformer Sakseplattform

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2023, lastekapasitet: 800 kg, egenvekt: 200 kg, konstruksjonsbredde: 1 800 mm, Scoop for bulk materials Teknisk tilstand: Ny Beskrivelse: Transport av materialer med en densitet ≤ 2100 kg/m3. Perfekt for transport av korn, jord, grus... Forsterket konstruksjon for maksimal belastning. Planeringshjelp for økt presisjon. Valgfri bolt-on skjærekant LDR tilgjengelig på enkelte modeller. Dwsdpfsu Dyd Nox Aaysb

Tilstand: god (brukt), Byggeår: 2008, driftstimer: 816 h, mastetype: teleskopisk, drivstofftype: elektrisk, Produsjonsår: 2008 Drift: Hjul Tillatt totalvekt: 7.815 kg Mål (L x B x H): 1015 x 242 x 254 cm Løftekapasitet: 230 kg Arbeidshøyde: 2.040 cm Teknisk tilstand: god Optisk tilstand: god Kontakt Ton for mer informasjon. Produsent: JLG Modell: E600JP Produksjonsår: 2008 Vekt: 7.815 KG Driftstimer: 816 Drift: Elektrisk, 4x2 Produktnummer: 20KTE200 Plattformhøyde: 18,40 m Arbeidshøyde: 20,40 m Plattformmål: 76x152 cm Rekkevidde: 13,50 m Totale mål LxBxH: 1015x242x254 cm Maks. plattformbelastning: 230 KG Maskinen er i god teknisk stand. Utstyrt med gode batterier. Inkl. dokumentasjon og CE-merking. Pris: € 14.950,- eks mva, tilgjengelig fra vårt anlegg i Hedel, Nederland. Levering mulig mot tillegg i pris. Dodpfx Aasy S Ud Uoyowb Nøkkelord: Lift, sakselift, sakseplattform Teleskoplift, knekkarmslift Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeidsplattformer Sakseplattform

Tilstand: god (brukt), Byggeår: 2014, driftstimer: 5 532 h, drivstofftype: diesel, GENIE S-45 teleskopisk lift / bomløft 4x4 DEUTZ DIESEL 5532 timer, 15,7 m arbeidshøyde, 2014 Video kan sendes via Whatsapp. Vi har et kontinuerlig lager, se nettsiden. Prisene er eksklusive Nuland. Van de Wert Trading B.V. har et varierende lager av maskiner, lastebiler, tilhengere og tilbehør. Alle våre leveranser skjer til handelspriser, i «som den er»-tilstand, uten garantier. (se våre generelle vilkår) For å avtale en visning og/eller prøvekjøring, kan du kontakte oss for å avtale et møte uten forpliktelser. Ring på forhånd, da vi ikke er til stede hele tiden. Dwsdpfjzxq R Ijx Aayeb Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Tilstand: svært god (brukt), Byggeår: 2020, ACSYS Type: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture: 2020 Dwsdpoyi Twgjfx Aayeb For sale is a high-quality ACSYS laser processing system, type BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W) and is ideally suited for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and enclosed safety cabin, the machine operates with extreme precision, reliability, and safety (Laser Class 1). Perfect for industrial applications, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Machine capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing of large layouts without misalignment (Large Field Removal Option) - Possible 3D component processing - Camera positioning system for exact workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Enclosed, safe industrial system (Laser Class 1) Features / Options: - LAS camera system – Live Adjust System HD - Large Field Removal (LFR) – Process large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC interface - Automatic door & safety monitoring - Illumination & signal beacon - Air-conditioned control cabinet - Extraction and filtration system for laser fumes - Extraction and filtration system (ULT LAS 1500): - Max. air flow: 3,240 m³/h - Rated air flow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine: - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Type: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Lasers: 2 × fiber lasers, each 70 Watts (air-cooled) - Wavelength: 1055 – 1070 nm - Work area: approx. 570 × 570 mm - Axis travel: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and details may be subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Tilstand: god (brukt), Diameter: 3.4 m Total height: 4.3 m Dodpfjw E E Absx Aayswb

Tilstand: god (brukt), EOS Type: P390 Eosint P 390 – Lasersintring System (SLS) Operating hours: 6735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform The Multibox is a typical accessory for EOS systems, used for powder handling, transport, and interim material storage. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Power supply: 400 V ±6/–10%, 50 Hz, 3 × 32 A, power consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (±0.1 °C) Dimensions & Weight: Machine (W × D × H): approx. 1230 × 1175 × 2100 mm Control cabinet: 610 × 790 × 2100 mm Control terminal: 950 × 700 × 1550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-Cooled – High-Pressure Pump Technical data Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ±0.1 °C Cooling type: Air-cooled Pump: High-pressure pump (“T” version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: Water or water-glycol Connection: NPT version (“AN”) Supply: 200–230 V AC, single phase Refrigerant: R407C Weight: approx. 1110 kg Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and information reserved!) Dwsdjzimhqopfx Aayeb For further questions, please feel free to contact us by phone.

Tilstand: svært god (brukt), Byggeår: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Product Description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system for series and process control in manufacturing. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system specifically designed for fast, highly repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. This unit is perfectly suited for dimensional, form, and position tolerance inspection of workpieces and can be used to provide feedback to CNC machines. The software launches without issues, system status display: “Started OK” (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measuring principle (very fast inspection cycles) - High repeatability in the micron range - Real-time temperature compensation - Suitable for shopfloor use - Automation-ready (e.g., for robot loading) - Ideal for series, sampling, and process control Typical industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer specifications / approximate values): Manufacturer: Renishaw Model: Equator™ 500 (H+150) Type: Comparative 3D measurement system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: - Comparative coordinate metrology - Temperature-compensated measurement Accuracy: - Very high repeatability - Measuring accuracy in the micron range (depending on application and strategy) Control & Software: Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dsdpszix Nmofx Aayewb Dimensions (approx.): Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see images) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to changes and errors in technical data and specifications!) If you have further questions, we will gladly answer them by phone.

Byggeår: 2020, Tilstand: svært god (brukt), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load: Designed for a maximum payload of 250 kg Key values for temperature tests: Temperature range: -55 to +180°C Temperature fluctuation over time at the center of the test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (to -45°C) Maximum heat compensation: 8000 W Key values for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Climatic performance data (extract) Humidity range: 10 to 98 % relative humidity (RH) Humidity deviation (over time): At the center of the test space, in steady-state condition, depending on the climate value: ±1 to ±3 % RH Temperature deviation (over time): At the center of the test space, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20 % RH): ±0.5 to ±1 K Operational data: LED strip 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10 % 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg Dedpfx Asziiypjayewb For your safety as a buyer, please note the following information! The following procedures are carried out in advance on all chambers offered by us: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and errors!) For further questions, please feel free to contact us by phone.

Tilstand: svært god (brukt), Thermo Scientific Thermo Scientific forced-air drying oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C Thermo Scientific forced-air drying oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system consisting of: Thermo Scientific / Heraeus forced-air drying oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5 The forced-air drying oven ensures even temperature distribution inside the chamber and is ideal for drying, heating, and tempering samples, components, or materials. Heating is performed via the external water temperature control unit (external heater), providing very stable, indirect, and material-friendly temperature control – without local overheating and with homogeneous heat distribution. Typical areas of application: Laboratory & research Industry & production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable. Djdpfx Aasziy D Eeyewb Device 1 – Forced-air drying oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20 Dimensions & weight (approx.) External dimensions: 895 × 816 × 715 mm Internal chamber: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg Device 2 – Water temperature control unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C Dimensions & weight (approx.) Dimensions: 30 × 75 × 60 cm Weight: 55 kg Overall: Complete temperature control and drying system Can be operated together (external heating / external heater) Total weight: approx. 155 kg Important note: “The table visible in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Tilstand: svært god (brukt), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been operated professionally. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Test type: Tensile and compression testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of nominal speed Travel resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement compliant with ISO 7500-1 Dimensions & Weight: Height with levelling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working width: 440 mm Working height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Fuse: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Test temperature: 23.3 °C Travel measuring system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before measurement series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Dwodjzizrkspfx Aaysb Installed Modules & Components DCSC measuring module Force transducer Xforce P / Xforce HP Incremental encoder (rotary travel measurement system) ISO 7500-1 compliant force measurement Installation under moving crosshead Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Sample grips / fixtures Adapters and holders Tools Documentation folder with documentation Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Tilstand: brukt, total lengde: 1 410 mm, egenvekt: 423 kg, byggehøyde: 1 060 mm, konstruksjonsbredde: 2 150 mm, Spade for bulkgods Dedjwlxgtopfx Aayjwb

Tilstand: svært god (brukt), MDS Type: MDS A220-PD MDS A220-PD Autoriv Manual Workstation The A220-PD assembly system is a stationary manual workstation designed for processing press-in fasteners. Intended use: The machine is intended for pressing-in fasteners. The operator manually inserts the corresponding screws, plastic nuts, and the workpiece into the machine. The operator then triggers the pressing process using a footswitch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punch stud / rivet stud Thread sizes - M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, unplugged Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, moisture-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm Height (H): approx. 1,800 mm Width (W): approx. 600 mm Values apply for a working height (WH) of 1,000 mm. Pneumatics: Standard: Manufacturer SMC Option: Manufacturer FESTO Control system: Standard: Manufacturer B & R Option: Manufacturer Siemens Dedpozgr I Rsfx Aayowb Machine type: C-Frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be selected via the control panel. Automatic mode: Pressing in of fasteners is performed in automatic mode. Movements are only initiated once the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustment tasks on the machine are carried out. In this mode, individual movements can be activated. Weight: Approx. 600 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Byggeår: 2022, Tilstand: svært god (brukt), Dycometal Djdszgr Rropfx Aayewb Type: CCK -40/1500T Climate chamber, water-cooled Volume: 1500 liters Internal dimensions: Height 1000 mm, Width 1000 mm, Depth 1500 mm External dimensions: Height 2200 mm, Width 1293 mm, Depth 3400 mm Thermal test Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to 1.5°C Climatic test temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1%RH to ±3%RH Condensor: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1120 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) For further questions, we will be happy to assist you by phone.

Tilstand: svært god (brukt), Byggeår: 2023, Schulz Schulz Electronic Power Test Cabinet with 8x Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. The system comes from professional laboratory use and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: - 8 individually usable laboratory power supplies SM330-AR-22 - Each power supply with precise voltage and current control - Sequence/automatic mode for complex test sequences Dwedpfxozix A Hs Aayeb - Large switch cabinet with: - Main switch - Start/stop - Emergency stop - Side grilles for optimum ventilation - Castors for easy transport - Network labels available (e.g. CTSK05 #01 172.25.108.201) Technical data: Switch cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Max. current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable - Industrial quality – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, control elements are clean, cabinet is sturdy. No visible damage. Scope of delivery: (See picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Castors mounted (Changes and errors in the technical data, information subject to change!) Further questions can be answered by phone.

Tilstand: god (brukt), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical data: Material: Composite materials (carbon fiber, glass, Kevlar) Dsdpfx Aaezg Tz Eoyjwb Technology: Fused Deposition Modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 mm Ø Print speed: 10 - 150 mm/s XY Precision: +/- 0.05 mm Max. build volume: 500 × 400 × 450 mm Power supply: 230 V AC, 50 Hz, 10 A, 2.3 kW Additional features: Touchscreen Condition: used Scope of delivery: (see pictures) + Filament spools (PETG) and print accessories Only PC (WIN 7) available! Monitor and input devices NOT included! License for the current printer operating software must be purchased by the buyer (approx. 200 Euros for Simplify3D)! (Specifications are subject to change and errors may occur in the technical data!) If you have further questions, we are happy to answer them by phone.

Tilstand: ukontrollert (brukt), Epson Type: G20-A01SR / RC180 Epson SCARA robot with Epson robot controller Epson SCARA G20 Long arm with high strength The G20 manipulators are designed for very high loads, such as heavy components or packaging units with a high weight (up to 20 kg). Epson G20 Max. payload: 20 kg Reach: 850 / 1,000 mm Z-stroke: 180 / 420 mm Epson controller RC180 Condition: untested / for spare parts defective! Condition: used Dwodpfxszh U S Us Aaysb Scope of delivery: (see picture) (Subject to changes and errors in technical data, information provided without liability!) For further questions, we will be happy to assist you by phone.

Tilstand: brukt, GRIESER Type: VPL 3.0 Total mixing chamber volume: 3.0 litres Usable volume: 0.3 to 2.0 litres Mixing chamber pressure: 0 to 1.2 bar abs. Pressure in stainless steel double jacket: N/A Critical rotation speed: 1800 rpm Operating speed range under load Paddle mixer: 38–282 rpm Scraper: 9–90 rpm Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3 kW Rated current: 5.0 A Main switch: 32 A Fuse protection: 16 A Weight: 250 kg For sale ex location! Dwodpfjzix Ehox Aayeb Condition: used Scope of delivery: (see picture) (Changes and errors in technical specifications and information reserved!) We will be happy to answer further questions by phone.

Tilstand: god (brukt), Autotherm Type: Temperature Control Unit Autotherm AW 95-12/VK/E Temperature Control Unit Autotherm AW95-12_VK for water/glycol temperature regulation (completely overhauled) Autotherm Temperature Control Unit AW: For highly precise temperature regulation of water Temperature control units from Autotherm are used in various sectors of industry, research, and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers, and heating chambers with temperature-controlled water, keeping them highly precisely at the desired temperature. Application areas: - Mechanical engineering, e.g. solar and wind energy industry, textile industry - Plastics processing - Chemical and pharmaceutical industry - Paper manufacturing - Medical technology - Food industry - Research Temperature Control Unit Autotherm AKW AW95-12/VK Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to cooling water supply required Dwedpozhkb Esfx Aayeb Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power supply: 400 Volt / 50 Hz 13,400 Watt 19.6 A 5.1 bar Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions you may have by telephone.

Tilstand: svært god (brukt), IPG Type: YLS - 5000 Description: IPG Ytterbium Laser System YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via fieldbus interface Advanced IPG power supply with integrated safety features Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year: 2011 S/N: 11101050 Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors in the specifications and information!) For further questions, we are happy to assist you by phone. Dwjdpfx Aaezg Evueyjb