Kjøp brukt Scoop (261)

Tilstand: brukt, Knapp roller conveyor transfer pusher, 90° transfer, toothed belt pusher 750-485-425 RA1856 Manufacturer: Knapp Direction of travel: both directions Roller width (RB): 425 mm Nominal/External width (NB): 485 mm Length: 750 mm Distance between conveyor sections: 95 mm Distance between belt pushers: 400 mm Roller diameter: 50 mm Roller pitch: 75 mm Belt pusher drive: SEW motor 3x 300–500V Conveyor drive: Interroll EC300 Frame height: 132 mm Overall height including motor: 245 mm Current set height: 620 mm Conveying speed: adjustable up to 1.25 m/s with Interroll EC 300 Scope of delivery: includes supports, pneumatic pusher lifter and pneumatic end stop Optional: Side guides, single-sided or double-sided For individual, expert advice, simply contact us. Feel free to reach us by phone or email. We are happy to help you with the planning and implementation of your projects. Gedpfxok Abhwe Ahfsuh We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Tilstand: klar til bruk (brukt), Siemens 7SJ5111-5CA01-0C/DD overcurrent time protection relay, serial number as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos Gusdpfoxahknsx Ahfsh

Tilstand: brukt, Byggeår: 2007, Gebhardt Roller Conveyor 7000-610-550 RA1059 Retrofit Data Sheet Pos. GE 13.25 Type: Gebhardt – Roller Conveyor Type 310.01 Year of Manufacture: 2007 Order Number: 070 113/2007 Permissible Load Capacity: Gzul. = 30 kg/m Gsdpfok Aa Ddex Ahfouh Dead Weight: G = 17.5 kg/m Conveyor Length (FL): 2000 mm Roller Width (RB): 550 mm Nominal/Outer Width (NB): 610 mm (RB+60) Side Profile: Aluminium Conveying Speed: v = 0.35 m/s Rollers: Type G6/50 with slide bearings Roller Pitch: 100 mm Drive: Motor Type: W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/Shaft: M1 B, 20x40 Voltage: 230/400 V Current: 1.15 A Scope of delivery: without supports (please enquire if required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation simply get in touch with us. Please contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 780-650-500 RA1397 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. Side guides and/or light barriers can be installed at an additional cost upon request. Support legs are not included in the delivery scope but are optionally available upon request. The images shown of the conveyor system were taken while the unit was still installed in a logistics center. Godpfx Ahok Aa Ucefsuh Technical data: Conveyor length (NL): 780 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): infinitely adjustable with frequency converter Drive: SEW geared motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Drive drum (AT): Ø = 64 mm Return roller (UR): Ø = 34 mm Belt: type SNB 5 E Year of manufacture: 2001 Optionally available: Support legs Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Feel free to reach out by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Tilstand: brukt, Byggeår: 2008, RA1151 Dematic Belt Conveyor 7872-500-400 Downward belt conveyor, head drive, plug-on gearbox Year of manufacture: 2008 Conveying length incl. feed belt: 7,872 mm Overall width/nominal width (NB): 500 mm Belt width (GB): 400 mm Curved section + downward belt with nubbed Habasit belt Discharge belt with smooth belt, length: 733 mm with overdrive Curved sections: 2 pcs., adjustable angles Curved section 1: 631.72 mm Curved section 2: 66.50 mm Rubber-coated drive drum Drive: SEW 400 V, 0.75 kW, 2.1 A RPM 13,000, drive shaft speed RPM 68 Speed v= 0.35 m/sec or 21 m/min Scope of delivery: without supports (please enquire if required) Optional: Supports Gujdok Aa Emepfx Ahfjh Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual and professional advice, simply get in touch with us. Contact us easily by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Tilstand: brukt, Byggeår: 1959, Dreiediameter over bed: 380 mm Dreiediameter over cross slide: 215 mm Turning length: 1000 mm Machine weight: approx. 1800 kg Space requirements: approx. 2.7 x 1.2 x 1 m The L&Z lathe is in good condition. Scope of delivery includes extensive accessories and cabinets: - 3-jaw chuck Gjdpfxevwgmaj Ahfsuh - 4-jaw face plate - Steady rest

Tilstand: ny, Bore capacity in steel (diameter): 50.0 mm Outreach: 350 - 1,590 mm Workpiece height - max.: 645 - 1,240 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Tapping: M 42 Quill stroke: 320 mm Total connected load: 4.0 kW Machine weight approx.: 3,500 kg Dimensions (L x W x H): 2,450 x 980 x 2,840 mm Description - Large-sized base plate - Ideal for machining large workpieces - Thick-walled, precision-ground column for enhanced guidance of the arm - Arm and drilling head with independent hydraulic clamping - Convenient height adjustment of the arm via lift motor - Ideal for drilling, countersinking, reaming, and tapping - Hardened and ground gears, running in an oil bath - Excellent sliding properties of the drill head on the arm thanks to the ground surface Scope of supply Guodpfjxaad Tex Ahfjh - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial filling with Shell Tellus 46 - Coolant system - Lift motor - Hydraulic motor - Operating tools - Height-adjustable safety guard

Tilstand: brukt, Byggeår: 2007, Gebhardt Roller Conveyor (non-driven) 9600-510-450 RA1062 Retrofit Specification Sheet Pos. GE 40.40 Model: Gebhardt Roller Conveyor Type 330.01 Year of manufacture: 2007 Order number: 070 113/2007 Permissible load capacity: max. 30 kg/m Dead weight: 14 kg/m Conveyor length (FL): 8,900 mm Roller width (RB): 450 mm Nominal/outside width (NB): 510 mm (RB+60) Side profile: Aluminium Rollers: Type: G6/50, glide bearings Roller pitch: 100 mm Scope of delivery: without supports (please inquire if needed) Optional: supports available Gusdpsk Aa Dhefx Ahfsh Price excluding VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual and professional advice, please do not hesitate to contact us. Get in touch with us by phone or e-mail. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Tilstand: klar til bruk (brukt), Parker / Compumotor SX83-135 microstepping driver, SN:93090100026, used, normal signs of wear, fully functional, scope of delivery as per photos Guedjtvct Uspfx Ahfeh

Tilstand: ny, Byggeår: 2026, Type: Beltekran Årsmodell: 2026 Hydraulisk trykk: 16 MPa Hydraulisk strømning: 16,8 l/min Maks. løftekapasitet: 540 kg Hydraulikk-kjøler tilgjengelig 2 tilleggsfunksjoner Farge: grå / grønn Egenvekt: 1200 kg Understell: belter Godpof Tnzhsfx Ahfeuh Kjørehastighet: 1,5 km/t Skuffevolum: 0,02 m³ Maks. grave-dybde: 1745 mm Maks. tømmehøyde: 1919 mm Maks. graderadius: 3017 mm Maks. gravehøyde: 2842 mm

Tilstand: ny, Senteravstand ----- 3000 mm Senterhøyde ----- 280 mm Dreiediameter ----- 560 mm Spindelgjennomgang ----- 105 mm Bredde på seng ----- 350 mm Spindelhastighet ----- 25–1620 o/min Guedpfet Iq D Tsx Ahfeh Motor ----- 7,5 kW INKLUDERT * 3-akse digital avlesning, merke SINO * Hurtigskifteholder type Multifix TOOC3 med 4 holdere * Elektrisk brems * 3-bakkers chuck 315 mm * 4-bakkers chuck 400 mm * Planskive 450 mm * Fast og medløpende støtte * LED arbeidslampe og kjølesystem * Kasse med diverse verktøy

Tilstand: ny, Bore capacity in steel (diameter): 50.0 mm Throat depth: 360 mm Drilling stroke: 225 mm Morse taper: 4 MT Table: 570 x 480 mm Thread cutting capacity M 42, steel Spindle speeds: 50-316 / 316-2200 rpm Feed: 0.08 - 0.50 mm/rev Column diameter: 180 mm Distance spindle/table max.: 580 mm Distance spindle/base plate max.: 1185 mm Total power requirement: 3.0 kW Godpfx Ahsxacc Sofouh Weight: 630 kg Dimensions (L x W x H): 1020 x 750 x 2340 mm The GB 55 NC Vario geared column drilling machine is equipped as standard with stepless speed control, allowing cutting speeds to be optimally matched to the workpiece. Thanks to its heavy, solid construction, it is ideally suited for professional users, mechanical engineering, or workshop environments. Features - All settings are performed directly via the large-format touchscreen display - Supplied as standard with motorized table height adjustment - 6x automatic drill feeds, switchable via electromagnetic clutch - Hand-scraped, solid cast iron drilling table, tiltable from -45° to +45° - Ground base plate with T-slots, suitable for clamping especially tall workpieces - Guaranteed concentricity ≤ 0.02 mm (measured in the quill) - Automatic tool ejector and thread cutting device included - High smooth running due to ground gears running in an oil bath - Sturdy and ground steel column, designed for heavy-duty use Scope of delivery - Keyed drill chuck 1 - 13 mm / B16 - Drill chuck taper MT 4 / B16 - Reduction sleeves MT 4 / 3, MT 4 / 2, MT 3 / 1 - Motorized table lift - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial fill with Shell Tellus 46 - LED machine lamp - Digital speed display - Digital drilling depth display - Height-adjustable safety guard

Tilstand: ny, Plate thickness 1.20 mm Throat depth 270 (140) mm Roll center distance 60.0 mm Total power requirement manual drive kW Machine weight approx. 46.0 kg Space requirement approx. 600 x 250 x 500 mm Description: - 4 pairs of beading and flanging rolls included in delivery - For efficient production of various bead types - High accuracy due to precision-mounted shafts Guedpfxoxabmcj Ahfjh - Lower shaft with adjustable stop - Sturdy cast iron construction in modern design - Expanded range of applications thanks to 8 different, optionally available roll sets - Upper shaft adjustable Scope of delivery - 4 pairs of beading and flanging rolls - Workpiece stop - Roll key

Tilstand: ny, Plate width: 1020 mm Sheet thickness: 2.0 mm Opening width: 48 mm Max. bending angle: 0 - 135° Working height: 900 mm Total power requirement: manual operation Machine weight: approx. 285 kg Space requirement: approx. 1350 x 820 x 1140 mm Features: - Segmented upper and bending beams for a variety of bending options - Clamping via foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for sheet metal workshops and repair operations - Robust construction with modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending applications - Excellent price-performance ratio Gjdexaaufjpfx Ahfouh - Fast and simple bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower beam to suit different sheet thicknesses - High upper beam for producing profiles with high upstands Scope of delivery: - Segmented upper beam - Segmented lower beam - Manual back gauge - Bending segments: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Tilstand: brukt, Byggeår: 2007, Gebhardt roller conveyor 2000-1320-1260 RA1046 Retrofit specification sheet Pos. GE 20.25 Type: Gebhardt – Roller conveyor Type 330.01 Gedpfxjk Aa A Ie Ahfjuh Year of manufacture: 2007 Order number: 070 113/2007 Permissible load: Gzul. = 30 kg/m Own weight: G = 25 kg/m Conveying length (FL): 2000 mm Roller width (RB): 1260 mm Nominal/outside width (NB): 1320 mm (FB+60) Side profile: Aluminium Rollers: Type: G6/50 with slide bearings Roller pitch: 100 mm Scope of delivery: without supports (please inquire if required) Optional: Supports Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice please contact us directly. Simply contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Tilstand: brukt, Byggeår: 2001, Transnorm Belt Curve Conveyor Left GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve is in good used condition and fully functional. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are optionally available upon request. Belt curves are commonly used in intralogistics for in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are renowned for performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered drums and a specially developed belt guidance system ensure maximum smoothness of operation. Gedpek Abcgefx Ahfouh The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Specifications: Model: TS 1600-105 Belt Curve Conveyor Conveying length at center radius (NL): 640 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° Support legs and side guides available optionally on both sides Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double-layer, green, smooth, KT36 (see pictures for wear) Year built: 2001 Optionally available: Supports Single-sided and double-sided side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please contact us directly. Reach out by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team from Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Tilstand: ny, Bore capacity in steel (diameter): 40.0 mm Thread cutting: M30 Workpiece height - max.: 380 - 785 mm Arm reach: 985 mm Spindle mount: MK 4 Gjdpfx Ahsxaadyefeuh Drill head tiltable right/left: -80 / +80 degrees Table size: 1210 x 520 mm Speed range: 50 - 2000 rpm Column diameter: 220 mm Table size: 1210 x 510 mm Quill stroke: 200 mm Feed range - spindle: 0.08 - 0.50 mm/rev Total power requirement: 2.2 kW Machine weight approx.: 2800 kg Space requirement approx.: 2450 x 1200 x 2720 mm Features: - A wide range of clamping and machining options thanks to the structural design - Electromotoric height adjustment of the drill head without shifting the drilling position, ideal for deep hole drilling - Drill head swivels 180°, arm can be moved forwards and backwards and swivelled horizontally - Thread cutting device and 6 automatic drill feeds included as standard - Large table surface (1195 x 500 mm) enables clamping of multiple workpieces simultaneously - Digital speed and drilling depth display included - Fast drill head setup on the workpiece, clamping is hydraulic - Heavily ribbed column ensures high rigidity of the arm - Sturdy construction guarantees vibration-free operation - Infinitely variable electronic speed control as standard Scope of delivery: - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotoric drill head adjustment - Initial fill with Shell Tellus 46 - Keyless drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reduction sleeve MK 4 / 3, 4 / 2, 3 / 1 - Thread cutting device - LED machine lamp - Coolant system - Height adjustable safety guard

Tilstand: klar til bruk (brukt), Hydac OLF-5/4-S-370-N-N5AM002-C filter system – serial number MK116904, equipped with FCPA171B-4 / 6018870 motor, Hydac VM 2 C.0 pressure switch, and FZP-1/3.1/P/71 cooler, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos. Guedpfx Aheny Dngsfsh

Tilstand: brukt, Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Roller pitch: 75 mm Drive: round belt throughout curve and straight section Scope of delivery: includes double-sided side guides, without supports (supports available on request) Optional accessories: 2 double supports, Height adjustable top of roller +/-100 mm, Frequency inverter for stepless speed adjustment Price plus VAT, ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, expert advice, please do not hesitate to contact us. Simply get in touch by phone or email. We are happy to support you with the planning and implementation of your projects. Godpfsk Aa I Tex Ahfjuh We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, CNC milling machine startech cn k warehouse equipment BRAND NEW MACHINE Compact 3-axis machining center for milling and engraving, suitable for tool diameters up to max. 60 mm with shank diameters up to max. 16 mm. Spindle drive via powerful 2.4 kW motor. Intuitive machine software for PC with open interface for various CAD/CAM programs included in the scope of delivery. Gujdpfx Aeyx Dzvjhfsh Technical specifications: Work table: 760 x 1170 mm Spindle speed: 24,000 rpm Max. workpiece dimensions X: 915 mm Max. workpiece dimensions Y: 610 mm Max. workpiece dimensions Z: 176 mm Number of drilling spindles: 1 Max. tool diameter: 60 mm Max. travel speed X-axis: 5 m/min Max. travel speed Y-axis: 5 m/min Max. travel speed Z-axis: 2.5 m/min Nominal external suction connection: 40 mm Including 5 pneumatic suction cups for positioning on the work table—simple workpiece fixturing. Pneumatic working pressure: 6.5 bar Compressed air requirement: 120 l/min Includes wetCAT 141 RS-TOOL M-Class wet & dry vacuum CLEANCRAFT for extracting dust from e.g. hardwood, stucco, paint, concrete. Automatic filter cleaning Airflow: 4560 l/min Dust class: M Container volume: 41 l Hose diameter: 33 mm Sound pressure level: 74 dB(A) Power consumption: 1.1 kW Max. device socket connection: 2.4 kW Connection voltage: 220 – 240 V Network frequency: 50 / 60 Hz List price (MSRP): €14,789.00 Available at short notice Shipping available at extra cost

Tilstand: brukt, Byggeår: 2005, effekt: 7,5 kW (10,20 hk), klippehøyde (maks.): 170 mm, kuttebredde (maks.): 1 100 mm, sagbladets diameter: 500 mm, helningjustering av sagbladet: 46 °, høydereguleringstype: hydraulisk, sagblad hull: 30 mm, rotasjonshastighet (maks.): 5 500 o/min, omdreiningstall (min.): 2 800 o/min, total lengde: 3 300 mm, total bredde: 2 000 mm, total høyde: 1 800 mm, totalvekt: 1 500 kg, Utstyr: CE-merking, Nr. 04528 Panel Saw Martin T 73 BASIC Used, year of manufacture 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilting 0° - 46° Godpfxsyymtds Ahfsuh Hydraulic cutting height adjustment Lowerable rip fence Pneumatic spindle lock Cross table with fixed mitre setting Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for extraction system control Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (LxWxH) Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. The sale is carried out as is. Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: “purchased as seen”. Terms of payment: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Tilstand: brukt, Knapp Gravity Roller Conveyor with Accumulation Rollers 1620-710-650 RA1953 Make: Knapp Transport Direction: Bidirectional Roller Width (RB): 650 mm Nominal/Outer Width (NB): 710 mm Length: 1620 mm Roller Diameter: 50 mm Roller Pitch: 90 mm Roller Conveyor Drive: Belt drive, not included Accumulation Positions (Unpowered): 3 Frame Height: 90 mm Conveying Speed: Dependent on drive station, please contact us for details Scope of Delivery: Without supports, without side guides, without drive station, includes photoelectric sensors and accumulation mechanism Gusdpek Abmujfx Ahfeh Options available: - Supports - Side guide (single or double-sided) - Drive station Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For tailored, professional advice, simply get in touch with us. Contact us by phone or email—we are happy to assist with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Tilstand: brukt, Schulz curved roller conveyor, right-hand with straight section 90°-450-390 IR795+1350-450-390 RA1201 Curved conveyor: Angle: 90°, right Usable width (UW): 390 mm Nominal/outside width (NW): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (CL): 1350 mm Usable width (UW): 390 mm Nominal/outside width (NW): 450 mm Rollers, galvanized Pitch: 75 mm Geared motor: 0.25 kW Conveying speed: v= 0.3 m/sec Drive: Continuous round belt, curve + straight section Scope of supply: incl. double-sided side guides, without supports (please inquire if required) Gedpfxek Aa Ipo Ahfjuh Optional accessories: 2 double supports height-adjustable roller top +/-100 mm Frequency inverter for stepless speed adjustment Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg For professional, customized advice, simply contact us. Get in touch by phone or email. We're happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 1710-650-500 RA1370 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor features a SEW brand motor with MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed on request for an additional charge. Support legs are not included in the scope of delivery but are optionally available upon request. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical data: Conveyor length (NL): 1710 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Return roller: Ø = 34 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E Year of manufacture: 2001 Optionally available: Support legs Side guides (single-sided and double-sided) Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalised, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Gujdpfx Ask Aa Tbjhfjh your specialist and partner for intralogistics

Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 780-650-500 RA1450 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor and MOVIMOT frequency inverter for variable speed control. Side guides and/or photoelectric sensors can be installed on request at an additional cost. Support legs are not included in the scope of delivery but are available as an option upon request. The images shown of the conveyor system were taken while the unit was still installed in a logistics centre. Godek Aa Tmspfx Ahfouh Technical data: Conveying length (NL): 780 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): infinitely adjustable using frequency converter Drive: SEW geared motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return pulley (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of manufacture: 2001 Optionally available: - Support legs - Side guides All prices net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For tailor-made, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics