Kjøp brukt Dyp Kjøleskap (1 043)

Tilstand: ny, Byggeår: 2025, pressekraft: 150 t, bordbredde: 800 mm, bordlengde: 800 mm, klaring mellom søylene: 800 mm, slagslengde: 600 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 150/50-ton four-column hydraulic drawing press is an industrial press solution developed for metal drawing, deep drawing, and precision pressing applications, featuring a rigid four-column frame design. The ST52-grade steel construction body undergoes stress relief via vibration method, ensuring the preservation of high parallelism and perpendicularity tolerances during extended operation. Ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely set via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC control, the press delivers high efficiency, reliability, and extended service life. The automatic lubrication system and electronic filter contamination alerts reduce maintenance requirements to a minimum. With its 150/50-ton capacity, this model is the ideal solution for mass production, die trials, and medium to high tonnage deep drawing applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Application Areas - Metal drawing operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 tons CAPACITY (CUSHION): 50 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 microns/meter PERPENDICULARITY TOLERANCE: 60 microns/meter STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELD STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3800 mm APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (adjustable from the screen) RAM / CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via the screen SYSTEM & PRESS STATUS INFO: Displayed on the screen DIE MEMORY: Adjustable via the screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 tons Production Note Godpfxox N Ul Ts Afnott This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: svært god (brukt), Produsent: Privileg Type: Enhetsnummer: Innhold: ca. 300 l Innvendige mål: 6 rom 480 x 350 x 200 mm Utstyr: 6 hyller i sikkerhetsglass Tilkobling: Temperatur: ned til 4°C Vekt: Mål: 600 x 600 x 1 600 mm Tilstand: god Gtsdpfx Aeuid Rusfnot Utstyr: Innvendig antibakteriell overflatebehandling, superøkonomisk energibesparende system

Tilstand: klar til bruk (brukt), Byggeår: 2016, En komplett kombinert dyptrykk-/dyprulleanlegg for tapetruller fra Chadwick er tilgjengelig. Arbeidsbredde: ca. 560 mm, substrat: papir/flis, dyptrykkprosess: vannbasert, trykkverk: 7, teknisk kapasitet: 180 m/min, realistisk kapasitet: 140 m/min, produksjonskapasitet: ca. 13 000–15 000 ruller/24 t. 1) Avruller Windmöller & Hölscher 892C, produksjonsår: ca. 1970-tallet. 2) 7x dyptrykkverk Chadwick. 3) Underpapiravrullings- og limestasjon. 4) Trekksstasjon Lenze. 5) 2x kaldprege-stasjoner Saueressig, produksjonsår: 1986/1989. 6) Gjennomløpstørker med 2 seksjoner, total lengde: ca. 8 m. 7) Dobbeltrulle kjølestasjon. 8) Banovervåkingssystem WV-Star 500, produksjonsår: 2016. 9) Rette- og skjæreanlegg Saueressig 200440Y, merkning: G9, produksjonsår: 1989. 10) Rulleautomat Ritter. 11) Vendestasjon Saueressig 201482Y, produksjonsår: 1989. 12) Skråtransportbånd, arbeidsbredde: ca. 1000 mm, lengde: ca. 3000 mm. 13) Sentralisert til- og avluftsenhet SitVerba, produksjonsår: 2016, tilluftsvifter: 7, avtrekksvifte: 1. Hele anlegget ble i 2016 oppgradert med nye direkte driftssystemer, styringssystemer, styreskap, rørsystemer, prosessteknikk for luft m.m., og ble totaloverhalt. Dokumentasjon tilgjengelig. Besiktigelse på stedet er mulig. Gtodpfswqqv Dox Afnst

Tilstand: god (brukt),

Byggeår: 2002, Tilstand: god (brukt), Cryovac ST77 RHE Dyppetank Antall: 2 på lager Helst i rustfritt stål 46 kW, 50 Hz, 380/415 V, 60 amp Lufttrykk: 6 bar Gtjdpfxoim Swhe Afnot

Tilstand: ny, Byggeår: 2015, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 15VWL1032, Maskinen leveres med fiksturer for produksjon av elektrosveiseforbindelser i følgende områder: Gtsdpeu Itk Rofx Afnot 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Originale MSA-tegninger inngår også i tilbudet. VWL 1200 er en vertikal, tre-akset CNC-maskin beregnet for legging av elektroformdeler, egnet for mellomstore og store formdeler eller rør. Maskinen kan produsere formdeler med en innvendig diameter fra vanligvis 250 til 1400 mm (1400 mm ved SDR17). Valgfritt kan en to-akset CNC-boreenhet leveres for boring av fusjonsindikatorer under ledningsleggingssyklusen, eller for boring av endehull under den eksterne profilsyklusen. VWL 1200 bruker spesialfiksturer som låses på en innovativ komponent, som er integrert i koblingsdesignet, slik at hver halvdel av koblingen har en egen smeltesone. Prosessen med ledningslegging starter ved en klemme i enden av koblingen. Ledningen legges inn med dobbel stigning i forhold til det som kreves, til slutten av smeltesonen, hvorpå verktøysystemet roteres og deretter beveger seg i motsatt retning mellom den første lagte stigningen, til hvileposisjon ved den andre klemmen. Prosessen fullføres i den andre delen av koblingen. VWL 1200-systemet er utformet for å muliggjøre lasting og lossing av større koblinger (som kan veie opptil ca. 300 kg selv før ledningen legges inn). Maskinen har en helt åpen topp, som tillater enkel over-hode-lasting ved bruk av portalkran. Alternativt kan deler lastes inn via ekstra brede operatørdører, ved hjelp av egnet grip- og håndteringsutstyr.

Tilstand: ny, Byggeår: 2025, pressekraft: 100 t, bordbredde: 800 mm, bordlengde: 800 mm, klaring mellom søylene: 800 mm, tilbaketrekkskraft: 40 t, slagslengde: 600 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 100/40 Ton Column-Type Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton column-type hydraulic deep drawing press is an industrial press solution designed for metal forming, deep drawing, and precision pressing applications, featuring a four-column rigid frame. The St52 grade steel frame is subjected to stress relief via vibration methods. This structure ensures long-term retention of high parallelism and squareness tolerances. The ram and blank holder systems operate independently; stroke and pressure are precisely controlled via a touchscreen panel. Utilizing REXROTH or PARKER hydraulic components, energy-efficient IE3 motors, and a PLC-controlled system, the press offers superior efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. This model provides an ideal solution for medium-scale serial production, die trials, and precision forming applications. Key Advantages - Rigid 4-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High accuracy and repeatability - Low maintenance costs, long service life Fields of Application - Metal forming operations - Deep drawing applications - Die trials and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m SQUARENESS TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BLANK HOLDER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm Gjdpjx N Ulyefx Afnstt WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO BOTTOM TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION MODE: Automatic (adjustable via panel) RAM / BLANK HOLDER STROKE AND TONNAGE ADJUSTMENT: Adjustable from panel SYSTEM & PRESS STATUS INFORMATION: Viewable from panel DIE MEMORY: Adjustable from panel LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 106341-11, Byggeår: 2005, totalvekt: 8 000 kg, total høyde: 2 700 mm, total lengde: 5 660 mm, total bredde: 3 956 mm, Boremetoden for dypboringsmaskinen er enkeltskärsboring (single-lip drilling). Informasjon om boreenhet: - Antall spindler: 1 - Trinnløs spindelhastighet: 300 - 8000 o/min - Spindeldriftsytelse: 7,5 kW - Maks. bordybde: 800 mm - Borediameter min/maks: 3 - 25 mm basert på ST 60 - Maks. spiralboring: 25 mm - Maks. gjengeboring: M24x3 - Materialfjerningsrate fresing: 150 ccm/min Akseforflytninger: - X-akse slag: 800 mm - Y-akse slag: 400 mm - Z-akse slag: 630 mm - W-akse slag: 800 mm Forflytningshastighet: - X-akse hastighet: 15000 mm/min - Y-akse hastighet: 15000 mm/min - Z-akse hastighet: 15000 mm/min - W-akse hastighet: 15000 mm/min Væskeinformasjon: - Kjøle-/smøremiddelforsyning: dypboreolje - Tankkapasitet: 800 liter - 1x skrapebånd-spontransportør - 1x hydraulikkaggregat og pneumatikkaggregat/-utstyr - 1x nedsenkingspumpe: Pumpens leveringskapasitet: 200 l/min - 1x lavtrykks-pumpe: Pumpens leveringskapasitet: 100 l/min Pumpedrift: 1,7 kW - 1x kompaktbåndfilter: Filterkapasitet: 120 l/min for bearbeiding av: stål/NE-metaller - 1x radialstempelpumpe med fjernjustering: Leveringsmengde: 2 - 94 l/min Pumpedrift: 7,5 kW Spindelenhet: - Utførelse: patronspindel med drivhus og spindeldrift med gir. Spindellager med presisjons-skråkulelager og levetidsfett-smøring. Frese- og borespindelenhet: - For konvensjonell bearbeiding - Spindelhode med verktøyopptak HSK 50 Borlagerholder: - Utførelse som 2-posisjoners revolver med elektromotorisk svingeenhet - Lagerposisjon via Hirth-snitt - Revolverhode med opptak for: Verktøyføringer for dypboring Frese- og borespindelenhet for konvensjonell bearbeiding Pickup verktøyskifter: - For konvensjonelle verktøy og borlagere - Utførelse som skivemagasin med 20 plasser inkl. mategang Automatisk verktøyskifter for dypboreverktøy: - Fast ELB søylemagasin for minst 5 verktøy inkl. automatisk verktøyspenning for HSK-opptak Spennbord med W-akse og NC-rundbord: - Lengde/bredde: 800x600 mm - Posisjoneringsnøyaktighet: B-akse +/- 30" - Nyttelast (sentrisk): 1500 daN Emneoppspenningsutstyr: - 1x bakdokke med manuell spennbevegelse - 1x NC-dreieapparat (a-akse) med tobakkechuck, manuelt betjent for emnespenning - 1x baseplate for mottak og oppspenning av borlagere + støtteprisme Gedpfx Asw E H E Refnstt Informasjon om elektrisk utstyr: - 1x CNC-styring Sinumerik 840D (digitalsystem), inkl. PLC S7-300 Tilkoblingsdata: - Driftsspenning: 3AC 400V ±10% - Frekvens: 50 Hz - Styrespenning: 24 V DC - Total tilkoblet effekt: 25 kW

Tilstand: klar til bruk (brukt), Byggeår: 1996, Dyptrykkmaskinen ble brukt for tapet og andre materialer. Antall trykkverk: 7, banebredde: 59 mm, maks. trykkbredde: 53 mm, maks. rulle­diameter: 1000 mm. Kongeaksel­drift / DW 1 + 7, individuell drift mulig. Opptak/avvikling med løfteplattform. Mellomtørker drevet med termisk olje. Trykkunderlag: papir og fiberduk, med registerkontroll. Gjder Equyopfx Afnett

Tilstand: ny, Byggeår: 2025, pressekraft: 80 t, bordbredde: 700 mm, bordlengde: 700 mm, klaring mellom søylene: 700 mm, tilbaketrekkskraft: 30 t, slagslengde: 500 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Spinning Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic spinning press is an industrial press solution featuring a rigid four-column body, specifically engineered for metal spinning, deep drawing, and die testing applications that require high precision. The St52-grade steel construction undergoes stress relief via vibration treatment, ensuring excellent parallelism and perpendicularity tolerances during pressing operations. The ram and pot systems operate independently, allowing for precise stroke and pressure adjustments via the operator panel. Equipped with REXROTH or PARKER hydraulic components, IE3-class motors, and PLC-based control architecture, this press offers a durable, safe, and energy-efficient operation. The automated lubrication system and filter contamination alerts minimize maintenance requirements. This model is ideal for small to medium-scale series production, die testing, and precision forming operations. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage control for ram and pot - Full control via touch panel - High repeatability and precision - Low maintenance costs and long service life Typical Applications - Metal spinning processes - Deep drawing operations - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (POT): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (POT): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING CERTIFICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DOWN SPEED: 150 mm/s MOVING TABLE SPINNING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s POT TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER INNER DIAMETER: Ø 200 mm – Ck45 POT CYLINDER INNER DIAMETER: Ø 125 mm – Ck45 AUXILIARY SPEED CYLINDERS: 2 pcs APPROXIMATE PRESS HEIGHT: 3300 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM GROUND: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (adjustable from the panel) RAM / POT STROKE AND TONNAGE SETTING: Adjustable from the panel SYSTEM & PRESS STATUS INFO: Viewable on screen DIE MEMORY: Adjustable from the panel LINEAR SCALE: NOVATECHNIK or TURCK Gtedpex N Ultjfx Afnot PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons

Tilstand: klar til bruk (brukt), Byggeår: 2006, Et komplett silketrykk- og dyptrykkanlegg for tapeter av papir og nonwoven er tilgjengelig. Kapasitet: 15 000 ruller/24t. Substrater: Papir: 80–150 g/m², nonwoven: 50–150 g/m². Trykkbredde: 1 060 mm, arbeidsbredde: 1 200 mm, trykkhastighet: 5–150 m/min. Består av: forbehandling, dyptrykksverk, 5x silketrykkverk, 2x silketrykk-dyptrykksverk, 5x mellomtørkere (standardutførelse), 2x mellomtørkere (med 1,5x tørkehøyde), 1x hovedkanal med 6x 4 m soner, rullemaskin/avvikler, registerpreging, doble trykkverk. Inkluderer diverse periferienheter og aggregater. Totale dimensjoner L/B/H: ca. 60 m/8 m/6 m. Dokumentasjon er tilgjengelig. Besiktigelse på stedet er mulig. Gtjdpfx Afjt Rkatonjt

Tilstand: ny, Byggeår: 2025, pressekraft: 60 t, bordbredde: 700 mm, bordlengde: 700 mm, klaring mellom søylene: 700 mm, tilbaketrekkskraft: 20 t, slagslengde: 400 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 60/20 TON COLUMN-TYPE HYDRAULIC FLOW FORMING PRESS General Description The CRONOSSTECH 60/20-ton column-type hydraulic flow forming press is a robust and compact press solution designed for precision metal forming, deep drawing, and flow forming applications. Its four-column construction ensures stable parallelism and perpendicularity tolerances during the pressing process. The frame, made from St52 quality steel, undergoes stress relief via vibration method. Ram and die cushion systems can be controlled independently, with stroke and pressure adjustments made precisely via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and an automatic lubrication system, the machine ensures long-lasting, safe, and efficient operation. The PLC-controlled system minimizes operator errors. This model is an ideal solution for small and medium-scale flow forming, deep drawing, die try-out, and auxiliary pressing applications. Key Advantages - 4-column rigid press frame construction - Independent stroke and tonnage control for ram and die cushion - System adjustment via touchscreen panel - High accuracy and repeatability - Low maintenance requirement, long service life Fields of Application - Metal flow forming applications - Deep drawing operations - Die try-out and prototype production - Metalworking and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-column FRAME MATERIAL: St52 – ERDEMİR Godpfox N Ulgex Afnett COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (DIE CUSHION): 20 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (DIE CUSHION): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELDING STRESS RELIEF: Stress relief by vibration WELDING APPLICATION: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s DIE CUSHION TABLE ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 175 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3100 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION METHOD: Automatic (adjustable from interface) RAM / DIE CUSHION STROKE & TONNAGE SETTING: Adjustable from interface SYSTEM & PRESS STATUS INFORMATION: Monitorable on interface DIE MEMORY: Configurable from interface LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 2 500 t, bordbredde: 1 800 mm, bordlengde: 2 600 mm, tilbaketrekkskraft: 800 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications requiring extremely high tonnage, large bed dimensions, and precise blank holder force. The 8-guided H-frame press body ensures high rigidity during the pressing cycle, maintaining parallelism and perpendicularity tolerances over the entire stroke. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance with 2500 tons of main ram and 800 tons of blank holder capacity, making it ideal for large and deep draw dies. Its stress-relieved, welded steel construction is designed for long-lasting and reliable operation in heavy industrial environments. ⚙️ Standard Equipment • 8-guided H-frame welded steel body • Stress-relieved frame by vibration • Bronze Zr14 slide bearings • Welding applications approved by WPQR and WPS with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen control panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Display of hydraulic unit oil temperature and system diagnostics on screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Welded steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR grade steel Slide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Gtjdpfxjx N Uk Aj Afnot Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 2 000 t, bordbredde: 1 500 mm, bordlengde: 2 500 mm, tilbaketrekkskraft: 600 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and controlled blank holder pressure. With its 8-guided slide H-frame body structure, both ram and table movements are executed with high rigidity throughout the pressing operation; parallelism and perpendicularity tolerances are consistently maintained over the full stroke length. The CHSP 2000/600 model, featuring a 2000-ton main ram and 600-ton blank holder capacity, provides high control and repeatability for large-scale dies, deep drawing, and forming operations. The vibration stress-relieved steel welded frame ensures a long service life and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction H-frame with 8 guiding slides • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • Welding applications approved by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen operation panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control Gtjdjx N Ukvopfx Afnjt • Automatic lubrication system • Electronically monitored filter contamination warning • Display of hydraulic unit oil temperature and system status on the screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, 8-guided slide H-frame press Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram / Blank Holder): 2000 / 600 Tons Moving / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 units) Blank Holder Cylinder: Ø390 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 1 500 t, bordbredde: 1 500 mm, bordlengde: 2 400 mm, tilbaketrekkskraft: 500 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing Press (Drawing) – 8 Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic drawing presses are designed to provide maximum frame rigidity, precise parallelism, and long service life in deep drawing applications requiring very high tonnage and large table sizes. Thanks to the 8-slideway H-frame structure, the ram and table movements are controlled and stable throughout the pressing process. The CHSP 1500/500 model, featuring a 1500-ton main ram and 500-ton blankholder capacity, is engineered for handling large-sized molds, deep drawing, and precision forming operations. The vibration-stress-relieved steel construction body ensures high strength and reliability in heavy-duty industrial conditions. ⚙️ Standard Equipment • 8-slideway steel construction H-frame • Vibration-stress-relieved welded frame • Bronze Zr14 slideway bushings • WPQR and WPS certified welding by TURK-AK accredited body (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch screen panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination sensor • Monitoring of hydraulic oil temperature and system status on display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Steel construction H-frame, 8 slideways Frame Material: St52 – ERDEMIR Slideway Bushings: Bronze Zr14 Capacity (Ram / Blankholder): 1500 / 500 Tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Squareness: 120 / 60 micron/meter Stroke (Ram / Blankholder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blankholder Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Gsdpfx Asx N Ukiefnett

Tilstand: ny, Byggeår: 2025, pressekraft: 1 200 t, bordbredde: 1 500 mm, bordlengde: 2 000 mm, tilbaketrekkskraft: 400 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Hydroforming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic forming and deep drawing presses are engineered to provide maximum rigidity, precision, and process control in sheet metal forming applications that require high tonnage. The 8-gib H-frame body structure ensures stable maintenance of parallelism and perpendicularity tolerances even at large table sizes. The CHSP 1200/400 model, with a 1200-ton main ram and 400-ton cushion capacity, is designed for heavy industrial applications such as deep drawing, hydroforming, and processes requiring controlled material flow. The steel construction frame, stress-relieved by vibration, ensures long service life and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slideway bearings • WPQR and WPS approved welded assemblies by TÜRK-AK accredited certification (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Hydraulic unit oil temperature and system status monitoring on display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switching components Gtsdpfx Ajx N Uirjfnet • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Cushion): 400 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Clearance (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Cushion Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 1 000 t, bordbredde: 1 500 mm, bordlengde: 2 000 mm, tilbaketrekkskraft: 350 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8 Guides Gjdjx N Uilepfx Afnjtt General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and flow forming applications. The 8-guide H-frame construction provides high rigidity during pressing and ensures stable maintenance of parallelism and perpendicularity tolerances even with large bolster dimensions. The CHSP 1000/350 model, with a main ram capacity of 1000 tons and a blank holder capacity of 350 tons, is specifically designed for deep drawing processes requiring controlled material flow, particularly in the automotive, white goods, defense, and heavy industry sectors. The vibratory stress-relieved steel construction frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, H-frame body with 8 guides • Stress-relieved frame via vibration • Bronze Zr14 guide bushings • Welds applied in accordance with WPQR and WPS procedures approved by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen control panel (DELTA 7”) • Adjustable stroke control (ram and blank holder) • Adjustable tonnage (pressure) control (ram and blank holder) • Automatic lubrication system • Electronic contamination warning for filters • On-screen monitoring of hydraulic unit oil temperature and system status • Offline filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, H-frame body with 8 guides Frame Material: St52 – ERDEMIR Guide Bearings: Bronze Zr14 Capacity (Ram): 1000 tons Capacity (Blank Holder): 350 tons Moving / Fixed Table Size: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 pcs) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: ny, Byggeår: 2025, pressekraft: 800 t, bordbredde: 1 500 mm, bordlengde: 2 000 mm, tilbaketrekkskraft: 270 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + cushion) operating principle for high-tonnage sheet metal forming, deep drawing, and stamping applications. The 8-gibbed H-frame construction ensures high rigidity, stable parallelism, and long die life even with large bolster dimensions during the entire pressing process. The CHSP 800/270 model, with 800 ton main ram and 270 ton cushion pressing capacity, is specifically developed for processes requiring controlled material flow, particularly in the automotive, white goods, defense industries, and heavy sheet metal forming applications. The vibration stress-relieved steel construction frame provides long-term, reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gibbed H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 gib liner bearings • WPQR and WPS approved welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Monitor oil temperature and system status of hydraulic unit via display • Offline filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-gibbed H-frame press body Frame Material: St52 – ERDEMİR Gib Liner: Bronze Zr14 Gtjdpfx Asx N Uh Usfnet Capacity (Ram): 800 Ton Capacity (Cushion): 270 Ton Moving Bolster Size: 1500 × 2000 mm Fixed Bolster Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 pcs) Cushion Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 500 t, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 175 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed based on a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming operations. The 8-slide H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 500/175 model, with a 500-ton main ram and 175-ton cushion (blankholder) capacity, is designed to provide full control over the die and workpiece for high-tonnage deep drawing and forming applications. The frame construction is stress-relieved by vibration methods to ensure long-lasting and reliable operation. ⚙️ Standard Equipment Steel construction, 8-slide H-frame press body type Vibration stress-relieved frame structure Bronze Zr14 slide bearings WPQR and WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) accredited by TÜRK-AK Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch screen panel (DELTA 7”) Adjustable ram and cushion stroke control Adjustable ram and cushion tonnage (pressure) control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Safety systems for operator protection SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearing: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/mt. Perpendicularity Tolerance: 60 micron/mt. Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified according to EN ISO 14731) Gtjdpfx Asx N Uhuofnst Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø500 mm – Ck45 Cushion Cylinder Bore: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5800 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: ny, Byggeår: 2025, pressekraft: 400 t, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 150 t, slagslengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting principle to provide controlled material flow in metal forming, deep drawing, and spinning applications. Thanks to the 8-slide H-frame construction, maximum rigidity is maintained during pressing, and parallelism and perpendicularity tolerances are stably preserved throughout the long stroke. The CHSP 400/150 model features a main ram capacity of 400 tons and a blankholder (pot) capacity of 150 tons, designed for deep drawing and spinning applications that require high tonnage. The frame construction is stress-relieved by vibration to ensure long life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Vibration stress-relieved body structure - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA HMI touchscreen panel - Adjustable ram and blankholder (pot) stroke control - Adjustable ram and pot pressure (tonnage) control - Automatic lubrication system - Electronically controlled filter contamination warning - Hydraulic unit oil temperature and system status display on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Tons Godsx N Uhhjpfx Afnett Capacity (Pot): 150 Tons Moving Table Dimension: 1200 × 1500 mm Fixed Table Dimension: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 1000 mm Pot Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS procedures accredited by TÜRK-AK EN ISO 15614-1:2017 (Welding procedures are supervised by “welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Spinning Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Pot Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Pot Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 5600 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2200 mm Height of Lower Table from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 300 t, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 100 t, slagslengde: 800 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Metal Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, with a 300-ton main ram and a 100-ton cushion (pot) capacity, is designed for deep drawing and metal spinning applications requiring high tonnage. The machine body is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame type press with 8 guided slides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welds accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 Type: Steel construction, H-frame press with 8 guided slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Ton Capacity (Cushion): 100 Ton Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Cushion Table Advance Speed: 30 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Cushion Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Fast Advance Cylinders: 2 units Approximate Height of Press: 4400 mm Approximate Width of Press: 3250 mm Approximate Depth of Press: 2200 mm Height of Lower Table from Floor: 1350 mm Pre-Fill Valve: NG 150 Gtsdpsx N Uhbjfx Afnjt Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 250 t, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 80 t, slagslengde: 800 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its 8-guided H-frame structure, the press ensures maximum rigidity during operation; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton bottom cushion (pot), is designed for medium to high tonnage deep drawing and forming operations. The frame construction is stress-relieved via vibration methods, aiming for long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 slideways - Vibration stress-relieved frame structure - Zr14 Bronze slideway bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 250/80 - Type: Steel construction, H-frame body with 8 slideways - Frame Material: St52 – ERDEMİR - Slideway Bushings: Zr14 Bronze - Capacity (Ram): 250 Tons - Capacity (Cushion/Pot): 80 Tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion/Pot): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relieving: Vibration stress relief - Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max Working Pressure: 250 Bar - Total Installed Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 4200 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 Tons Gsdpfx Afjx N Uaqenstt Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 200 t, bordbredde: 1 000 mm, bordlengde: 1 200 mm, tilbaketrekkskraft: 70 t, slagslengde: 800 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Metal Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP Series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal forming (spinning) applications. The 8-slide H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 200/70 model, with its 200-ton main ram and 70-ton cushion (pot) capacity, is designed for deep drawing and metal forming operations requiring medium-high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame type press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable stroke control for ram and cushion - Adjustable tonnage (pressure) control for ram and cushion - Automatic lubrication system - Electronically monitored filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Offline filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Ton Capacity (Cushion/Pot): 70 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relieving: Vibration method Welding Application: WPQR and WPS approved by TÜRK-AK EN ISO 15614-1/2017 (Welding applications inspected by certified “welding coordination engineers” in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø320 mm – Ck45 Cushion Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 3800 mm Approx. Width: 2950 mm Approx. Depth: 2200 mm Gtedpfex N T U Tjx Afnot Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Offline Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 150 t, bordbredde: 1 000 mm, bordlengde: 1 200 mm, tilbaketrekkskraft: 50 t, slagslengde: 600 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guide Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guide slides ensures maximum rigidity during pressing, while parallelism and verticality tolerances are stably maintained throughout the stroke. The CHSP 150/50 model is engineered for precise and repeatable deep drawing operations, featuring a 150-ton main ram and a 50-ton cushion (blankholder) capacity. The machine frame is stress-relieved using vibration techniques, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 slide guides - Stress-relieved frame by vibration - Zr14 bronze slide bearings - WPQR and WPS certified welding (accredited by TÜRK-AK) (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration system - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical switchgear 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, H-frame with 8 slide guides Frame Material: St52 – ERDEMİR grade steel Slide Bearings: Zr14 bronze Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 600 mm Cushion Stroke: 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress-Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (Welding applications are supervised by certified “welding coordination engineers” according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Advance Speed: 30 mm/sec Main Cylinder Bore: Ø280 mm – Ck45 Gedox N T U Hepfx Afnott Cushion Cylinder Bore: Ø160 mm – Ck45 Auxiliary Fast Approach Cylinders: 2 pcs Approx. Machine Height: 3650 mm Approx. Machine Width: 2950 mm Approx. Machine Depth: 2000 mm Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 100 t, bordbredde: 1 000 mm, bordlengde: 1 200 mm, tilbaketrekkskraft: 40 t, slagslengde: 600 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 100/40 H-type Hydraulic Deep Drawing (Spinning) Press – 8 Guides Gtodex N T Uyspfx Afnst General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and spinning applications. The 8-guide H-frame construction ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 100/40 model is designed for precise deep drawing and spinning operations, with a 100 ton main ram and 40 ton lower cushion (pot) capacity. The frame is stress-relieved by vibration for long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction H-frame body with 8 guides - Stress-relieved frame structure by vibration - Bronze Zr14 guide bushings - Welds in accordance with WPQR and WPS approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status values - Cooling system - Offline filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, 8-guide H-frame press body - Main Body Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 100 Tons - Capacity (Cushion): 40 Tons - Movable Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS approved by TÜRK-AK accreditation EN ISO 15614-1/2017 (inspected by certified welding coordination engineers as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Movable Table Rapid Descent Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Machine Height: 3400 mm - Approx. Machine Width: 2950 mm - Approx. Machine Depth: 2000 mm - Bottom Table Height from Floor: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Screen: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approx. Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.