Kjøp brukt Rcm Swinger (169)
Sorter resultater
- Laveste pris Høyeste pris
- Nyeste annonser Eldste annonser
- Korteste avstand Største avstand
- Nyeste produksjonsår Eldste produksjonsår
- Siste oppdatering Eldste oppdatering
- Produsenter fra A til Å Produsent fra Z til A
- Relevans
- Laveste pris
- pris
- Høyeste pris
- pris
- Nyeste annonser
- Innstillingsdato
- Eldste annonser
- Innstillingsdato
- Korteste avstand
- avstand
- Største avstand
- avstand
- Nyeste produksjonsår
- produksjonsår
- Eldste produksjonsår
- produksjonsår
- Siste oppdatering
- oppdatering
- Eldste oppdatering
- oppdatering
- Produsenter fra A til Å
- produsent
- Produsent fra Z til A
- produsent
- Betegnelse fra A til Å
- Betegnelse
- Betegnelse fra Z til A
- Betegnelse
- Modell fra A til Å
- Modell
- Modell fra Z til A
- Modell
- Laveste referanse
- referanse
- Høyeste referanse
- referanse
- Korteste driftstid
- Driftstid
- Lengste driftstid
- Driftstid
- relevans
- relevans
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HVR 3100-13
Ring
Tilstand: brukt, Byggeår: 2008, Plate width: 3100 mm
Plate thickness: 13.0 mm
Plate thickness (stainless steel): 8.0 mm
Hold-downs: 14 units
Strokes: 11–20 strokes/min
Oil capacity: 310 l
Bdjdpfx Aoxaadasnrsb
Cutting angle: 0.05–2.0°
Throat depth: 350 mm
Table height: 900 mm
Total power requirement: 22.0 kW
Machine weight approx.: 13,400 kg
Dimensions (L x W x H): 5,110 x 2,570 x 2,400 mm
Current list price approx.: €80,000
Special price on request
- in inspected condition – machine video -
?v=K4ymYMIJ7_Y
-----
Robust electro-hydraulic CNC guillotine shear "linkage guided"
* including CYBELEC "DNC 60 CUT" controller
* including CNC-controlled electro-hydraulic blade gap adjustment
* including CNC-controlled electro-hydraulic cutting angle adjustment
-----
Equipment:
- CNC electro-hydraulic guillotine shear, linkage guided
- including CYBELEC CNC controller, model "DNC 60"
- CNC motorized backgauge, travel range = 5.0–1,000 mm (X axis)
* with ball screw spindles
* automatically swings up at max. travel for long cuts
* selectable retract function ("Swing-Away function")
* positioning accuracy 0.1 mm
* approx. traverse speed 80.0 mm/sec.
- Electro-hydraulic cutting angle adjustment
- Electro-hydraulic blade gap adjustment
- 1x side stop, with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball rollers in the front support table
- Fold-away finger guard with safety switch
- BOSCH/HOERBIGER hydraulic unit
- SIEMENS electrical system
- Light curtain behind the machine (safety device)
- Rear sheet metal chute (for stacking sheets)
- 1x mobile foot switch
- CE-marked
- Operating manual
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HVR 3100-13
Ring
Tilstand: ny, Plate width: 3100 mm
Plate thickness: 13.0 mm
Plate thickness (stainless steel): 8.0 mm
Bdodpfsxabikox Anrsb
Hold-downs: 14 units
Strokes per minute: 11 - 20 spm
Oil capacity: 310 liters
Shearing angle: 0.05 - 2.0°
Throat depth: 350 mm
Table height: 900 mm
Total power requirement: 22.0 kW
Machine weight approx.: 13,300 kg
Dimensions (L x W x H): 5,110 x 2,570 x 2,400 mm
The manufacturer ERMAK offers you with the hydraulically guided guillotine shear of the HVR series a robust and durable machine for efficient sheet metal processing. With this compact all-round machine, you can increase your productivity. The HVR model hydraulic guillotine shear supports you in precise, fast and cost-effective cutting during your daily operations. The use of hydraulic hold-downs for sheet clamping and a support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet types stored in the material library. After selecting the maximum thickness and material type, the optimal blade gap and shearing angle are set automatically by the CNC control via electro-hydraulic adjustment, but can also be manually adjusted. The position and retract function of the motorized backgauge can be easily set via the touchscreen. Additionally, the control features memory for cutting programs with sequence management.
-----
Robust electro-hydraulic CNC guillotine shear "precision guided" type
* Including CYBELEC CNC touchscreen control
* Including CNC electro-hydraulic blade gap adjustment
* Including CNC electro-hydraulic shearing angle adjustment
-----
Equipment:
- CNC electro-hydraulic guillotine shear, precision-guided
- Including CYBELEC CNC touchscreen controller, model "CybTouch 8"
- Selected CNC control functions:
* Backgauge preselection – X axis
* Blade gap adjustment
* Piece counter
* Cutting length limitation
* Material selection, including plate thickness
* Cutting line illumination (for scribing)... and many more
- Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis)
* Mounted on ball screw spindles
* Automatically swings up at max travel for longer cuts
* Includes selectable retract function ("swing-away function")
* Positioning accuracy 0.1 mm
* Approx. travel speed 80 mm/sec
- 1x side stop, with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball rollers in the front support table
- Hinged finger guard with safety switch
* Finger guard with inspection windows for guided cutting
- Cutting line illumination with shadow marking
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain at the rear of the machine (safety device)
- Free-moving foot switch
- CE mark / conformity declaration
- Operating manual + wiring diagram + hydraulic diagram
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HGS 3100-6
Ring
Tilstand: ny, Plate width: 3,100 mm
Sheet thickness: 6.0 mm
Sheet thickness for stainless steel: 4.0 mm
Number of hold-downs: 14
Strokes per minute: 20 spm
Cutting angle: 1.2°
Control: CYBELEC CybTouch
Working height: 800 mm
Oil capacity: 150 litres
Total power requirement: 11.0 kW
Weight: 5,500 kg
Dimensions (L x W x H): 4,000 x 2,410 x 1,640 mm
The manufacturer ERMAK offers a robust and durable machine for economical sheet processing with the hydraulic swing-beam shear model series HGS. This compact all-round machine will boost your productivity. The HGS hydraulic swing-beam shear supports precise, fast, and cost-efficient cutting in your daily operations. The use of hydraulic hold-downs to secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control allows for the use of various sheet types already stored in the material library. Once the maximum thickness is selected, the optimal cutting gap is set automatically via electro-hydraulic CNC control, but can also be adjusted manually. The position and retract function of the motorised backgauge can be easily set via touchscreen. In addition, the control offers memory for cutting programs with cutting sequences.
-----
Robust electro-hydraulic CNC swing-beam shear
* Including CYBELEC CNC touchscreen controller
* Including CNC electro-hydraulic cutting gap adjustment
-----
Equipment:
- CNC electro-hydraulic swing-beam shear
- Including CYBELEC CNC touchscreen controller, model "CybTouch 8"
- Select functions of the CNC control:
* Backgauge preselection – X-axis
* Cutting gap adjustment
* Piece counter
* Cutting length limitation
* Material preselection, including sheet thickness
* Cutting line illumination (cutting to scribe line), etc.
- Motorised backgauge, travel range: 5.0 – 1,000 mm (X-axis)
* On recirculating ball screws
* Automatically swings up at maximum travel for longer cuts
* Including retract function selectable ("Swing-Away Function")
* Positioning accuracy: 0.1 mm
* Travel speed: 80 mm/sec
- 1x side gauge, with T-slot and mm scale
Bsdpoxaa Rgjfx Anrsdb
- 2x front support arms, with T-slot and mm scale
- Ball rollers in the front support table
- Hinged finger guard with safety switch
* Finger guard with inspection windows for scribe line cutting
- Cutting line illumination with shadow cast
- BOSCH/HOERBIGER hydraulic unit
- SIEMENS electrical system
- Light curtain behind the machine (safety device)
- Free-moving foot switch
- CE mark / Declaration of Conformity
- Operating manual + wiring diagram + hydraulic diagram
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HVR 3100-6
Ring
Tilstand: ny, Plate width: 3100 mm
Plate thickness: 6.0 mm
Bjdpfxjxaag Uo Anrodb
Frame gap: 3,100 mm
Hold-downs: 14 units
Strokes: 16–24 strokes/min
Oil capacity: 150 liters
Cutting angle: 0.5–1.5 °
Plate thickness for stainless steel: 4.0 mm
Throat depth: 350 mm
Motor power: 11.0 kW
Machine weight: approx. 7,060 kg
Dimensions (LxWxH): 4100 x 2200 x 2190 mm
The manufacturer ERMAK offers the HVR model range of hydraulic, guided guillotine shears—a robust and durable machine designed for cost-effective sheet metal processing. This compact all-rounder enhances your productivity. The HVR hydraulic guillotine shear supports precise, fast, and cost-efficient cutting in daily operations. Hydraulic hold-downs secure the sheet, and the bolster table with built-in ball rollers ensures ergonomic and efficient cutting for your operator. CNC control allows the use of various sheet types stored in the material library. After selecting maximum thickness and material type, the optimal cutting gap and angle are set automatically via CNC electro-hydraulic control, and can also be adjusted manually. The position and retract function of the motorized back gauge are easily set via touchscreen. The controller also features program memory for cutting routines.
-----
Robust electro-hydraulic CNC guillotine shear, slider-guided
* Including CYBELEC CNC touchscreen control
* Including CNC electro-hydraulic cutting gap adjustment
* Including CNC electro-hydraulic cutting angle adjustment
-----
Equipment:
- CNC electro-hydraulic guillotine shear, slider-guided
- Including CYBELEC CNC touchscreen controller, model "CybTouch 8"
- Sample CNC functions:
* Back gauge pre-selection – X axis
* Cutting gap adjustment
* Piece count
* Cutting length limitation
* Material pre-selection, including plate thickness
* Cutting line illumination (cutting to scribed line), and more
- Motorized back gauge, travel = 5.0–1,000 mm (X axis)
* On ball screw
* Automatic lift-up at maximum travel, for longer cuts
* Including selectable retract function ("Swing-Away Function")
* Positioning accuracy: 0.1 mm
* Approx. travel speed: 80 mm/sec
- 1x side gauge with T-slot and mm scale
- 2x front support arms with T-slot and mm scale
- Ball rollers in front support table
- Hinged finger guard with safety switch
* Finger guard with vision panel for cut-to-line operations
- Cutting line illumination with shadow line
- BOSCH/HOERBIGER hydraulic unit
- SIEMENS electrical system
- Light curtain behind machine (safety system)
- Mobile foot pedal
- CE marking/conformity declaration
- Operating manual + wiring schematic + hydraulic diagram
Annonse
Giebelstadt
1 208 km
Hjulgående gravemaskin / beltegraver / Engcon / tiltrotator
HydremaMX 17
Ring
Tilstand: god (brukt), Funksjonalitet: fullt funksjonell, effekt: 120 kW (163,15 hk), girtype: automatisk, drivstofftype: diesel, drivstofforbruk per time: 7 l/t, drivstofftank kapasitet: 280 l, farge: gul, egenvekt: 18 000 kg, løftekapasitet: 8 000 kg/m, dekktilstand: 50 prosent, kjøretilstand: 100 prosent, akselkonfigurasjon: 2 aksler, antall seter: 1, første registrering: 07/2021, skuffevolum: 1 m³, Byggeår: 2021, driftstimer: 3 200 h, maskin-/kjøretøynummer: Serien-Nr.: 14565, Utstyr: UVV-sikkerhetskontroll, aircondition, cruise control, ekstra frontlykter, firehjulsdrift, gripperhydraulikk, hodebeskytter, hydraulikk, hydraulisk hammer, justerbar bom, kjørecomputer, kran, lavt støynivå, standardskuffe, tilhengerkobling, Hydrema MX17 TIER 4
Full working order!
Not a rental machine despite the labeling!
Tiltrotator EC219 QS60 with grapple + EC Oil – permanently mounted
with Q safe
1x Cable bucket 600mm without teeth, year 2020, Engcon
Mounting S60
1x Trenching bucket 1000mm without teeth, year 2020, Engcon
Mounting S60
1x Grading/profile bucket 1700mm, year 2020, Engcon
Mounting S60
MX17
Specifications
Operating weight (A1)* kg: 18,000
Width over standard tires mm: 2530
Overall cab height mm: 3120
Tail swing mm: 1700
Rear swing radius mm: 1839
Front swing radius (L2.5) mm: 1990
Digging depth (L2.5) mm: 5410
Reach (L2.5) mm: 9320
Breakout force, bucket cylinder (ISO) kN: 126
Tear-out force, dipperstick (ISO) kN: 82
Max. bucket size m3: 1.00
Push blade REAR
Axle set: 315/70-R22.5
Dipperstick L.2.5
Return line 1" unpressurized, left side
Hydraulic option ZV2 (0–100 L), joystick steering via roller
Grapple circuit, bucket cylinder control Z1
Valve control from cab
SVAB L8 joystick, wiring for tiltrotator
Float position for boom cylinder Z3
2 additional hose rupture valves
LED work lights – 6 units
FOPS stone guard for cab, roof grid
Extra camera on counterweight
Extra camera on engine hood – special monitor with split screen
DAB radio with Bluetooth incl. antenna
Driver’s seat with ventilation
Central grease point for dozer blade, 1 grease fitting
Automatic central lubrication with 2 lt. reservoir (Item 100 included)
Electric refueling pump for fuel tank
Accessories:
Tiltrotator EC219 QS60 with grapple + EC Oil – permanently mounted
with Q safe
1x Cable bucket 600mm without teeth, year 2020, Engcon
Mounting S60
1x Trenching bucket 1000mm without teeth, year 2020, Engcon
Bdodpfx Anowx Hiijrjb
Mounting S60
1x Grading/profile bucket 1700mm, year 2020, Engcon
Mounting S60
Machine: HYDREMA Wheeled Excavator MX17-RB15
Serial No.: 14565
Financing available!
Additional attachments such as screening buckets, grading beams, etc., available!
Machine still in use!
Errors and prior sale excepted!
Sale to commercial customers only!
Annonse
Giebelstadt
1 208 km
Gravemaskin på hjul
HydremaMX 16
Ring
Tilstand: brukt, Funksjonalitet: fullt funksjonell, effekt: 120 kW (163,15 hk), girtype: automatisk, drivstofftype: diesel, drivstofforbruk per time: 8 l/t, drivstofftank kapasitet: 280 l, farge: gul, egenvekt: 18 000 kg, løftekapasitet: 8 000 kg/m, dekktilstand: 50 prosent, akselkonfigurasjon: 2 aksler, første registrering: 07/2017, skuffevolum: 1 m³, Byggeår: 2017, driftstimer: 4 800 h, maskin-/kjøretøynummer: 12339, Utstyr: UVV-sikkerhetskontroll, aircondition, antispinnsystem, cruise control, ekstra frontlykter, firehjulsdrift, gripperhydraulikk, hodebeskytter, hydraulikk, hydraulisk hammer, justerbar bom, standardskuffe, tilhengerkobling, Hydrema MX16 TIER 4
Fully functional!
Not a rental machine, despite signage!
Tiltrotator Rototilt R5 incl. grab module
Oilquick OQ 60-5 coupler
Stone and sorting grab with Oilquick
Engcon joystick
iDig 2D wireless control system
1x Grading/Profiling bucket 1700mm, year 2020, Engcon with OQ 60-5 mount
Bjdpfx Aewx Id Ienrodb
MX16
Specifications:
Operating weight (A1)* kg: 18,000
Overall width with standard tires: mm 2530
Rear overhang: mm 1700
Swing radius, rear: mm 1839
Swing radius, front (L2.5): mm 1990
Digging depth (L2.5): mm 5410
Reach (L2.5): mm 9320
Breakout force, bucket cylinder (ISO): kN 126
Tear-out force, dipper arm (ISO): kN 82
Max. bucket size: m3 1.00
Dozer blade REAR + trailer coupling with power supply
Wheel set: 315/70-R22.5
Dipper arm L.2.5
Return line 1" (unpressurized), left
Hydraulic option ZV2 (0–100 L), joystick steering via roller
Grab line, control for bucket cylinder Z1
Cab-controlled isolation switch
SVAB L8 joystick, cable for tiltrotator
Floating position for boom cylinder Z3
2 additional hose rupture valves
LED work lights – 6 units
FOPS rockfall protection for cab, roof guard
Extra camera on counterweight
Extra camera on engine hood – special monitor with split screen
DAB radio with Bluetooth incl. antenna
Driver’s seat with ventilation
Central lubrication point for dozer blade, 1 lubrication point
Auto central lubrication with 2 l container (item 100 included)
Electric refueling pump for fuel tank
Accessories:
RB15-MX16
Serial number: 12339
Financing available!
Additional attachments such as screening buckets, grading beams, etc. available!
Machine still in use!
Errors and prior sale excepted!
Sale to business customers only!
Annonse
Gütersloh
953 km
Maskinering senter
Röders TecRP 800
Ring
Tilstand: god (brukt), Byggeår: 2001, Funksjonalitet: fullt funksjonell, Portal machining center for HSC milling
The machine operates within a Röders RCM Automation system, making it suitable for integration into an automated production environment.
Technical specifications:
- Travel ranges: X 800 mm, Y 600 mm, Z 400 mm
- Drive power: 17 kW
Bdjdpfx Ajvri Nmenrsb
- Spindle speed: 36,000 rpm – Fischer motor spindle
- Spindle taper: HSK E50
- Feed rate: up to 60 m/min
Worktable
- Dimensions: 900 mm x 700 mm
- Max. workpiece weight: 800 kg
Control system
- Röders HSC RMS6, including software for:
Milling simulation and pocket machining
- Electronic handheld pendant and mouse
- Ethernet interface integrated in Windows NT
- Remote maintenance for the RSM 6 machine control
Machine design
- Portal construction with temperature stabilization of the machine frame
Tool changer
- 30 positions with collision monitoring
Equipment
- Cooling unit for milling spindle
- Infrared measuring probe for automatic:
Tool length correction, diameter measurement, and tool breakage detection
- Microjet spray cooling and lubrication device
- Fixed bearing and spindle nuts water-cooled
- Full safety enclosure (crane loading possible)
- Connection for work area extraction
- 2 screw-type chip conveyors
- Workpiece cleaning via separate air nozzles
Machine data
- Footprint (excluding service areas): approx. 3,100 mm x 3,000 mm x 3,200 mm (LxWxH)
- Weight: approx. 13,000 kg
- Connected load: 400V, 50/60 Hz, 3 phases
The machining center is in good condition. Maintenance and repair work have been carried out regularly.
A demonstration under power and with material can be arranged by appointment.
All tools and equipment visible in the photos are not included in the scope of delivery.
Technical modifications and errors excepted.
Annonse
Dortmund
997 km
Plate skjær
LAMI NOVASC 4006
Ring
Tilstand: ny, 1 brand new hydraulic swing-beam guillotine shears
Make: LAMI NOVA / Exclusive distributor!
Model: SC 4006
Maximum cutting length: 4100 mm
Maximum sheet thickness (mild steel): 6 mm
Maximum sheet thickness (stainless steel): 4 mm
Cutting angle: 1.5°
Throat depth: 350 mm
Cutting strokes: 14 / min
Drive power: 7.5 kW
Dimensions (L x W x H): approx. 4630 x 2050 x 1700 mm
Weight: 9600 kg
Accessories / Special features:
• NC control ELGO P 40 as electronic position indicator for the motorized backgauge, length = approx. 800 mm, with ball screw spindles
• 1 heavy-duty square arm with swing stops, 1000 mm
• 2 heavy-duty support arms
• Large throat depth of 350 mm for cutting longer sheet metal panels
• Central blade gap adjustment
• Cutting line illumination
• Flat fixed cutting angle of 1.5°
• Ball transfers in the table
• Upper blade with 2 and lower blade with 4 cutting edges
• Plastic feet for the hold-downs
Bjdpjd Ad Dbofx Anrsdb
• Electric foot switch
• Rear sheet metal chute
• Oil filling
• Hydraulics from BOSCH, DUPLOMATIK, REXROTH or OILCONTROL
• Electrics from SIEMENS, TELEMECANIQUE
• Operating manual
• CE compliant
Image: shown with optional equipment!
Delivery time: approx. 3 months after receipt of order
plus pre-carriage costs China - Germany
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
Annonse
Borken
964 km
Maskin for resonanstesting
SincoTecPower Swing 100 kN MOT Big Table
Ring
Tilstand: brukt, SincoTec
Type: POWER SWING 100 MOT Big Table
The POWER SWING 100 MOT from SincoTec is a high-performance resonance test bench for fatigue testing of materials and components. The system enables dynamic load tests with high forces (up to ±100 kN) with precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under real-world conditions.
Thanks to its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industry and academia.
Bdodpoxrlkvefx Anreb
Notes:
The resonance test bench is ideal for material and component testing under dynamic loads.
Technical data:
General data – test bench:
- Total height: 1215 mm (without clamping device)
- Width: 2005 mm
- Depth: 1205 mm
- Maximum force amplitude: 50 kN
- Maximum total force: ±100 kN
- Sensor accuracy: at least Class 1 (according to DIN EN 10002-3)
Control cabinet:
- Total height: approx. 1800 mm
- Table height: 1080 mm
- Width: 650 mm (narrow table) / 1420 mm (wide table)
- Depth: 700 mm
- Weight: 180 kg (with granite tabletop approx. 240 kg)
- Colour: RAL 9006 (White aluminium), tabletop Midnight
Installation requirements:
- Required space: 4.3 × 3.0 m
- Required ceiling height: at least 2.5 m
- Floor load capacity: 2.0 t/m²
- Power supply: 400 V / 50 Hz (three-phase current, clockwise rotating field)
- Connection: CEE 5-pin socket, 16 A
- Fusing: 16 A
- Weight: approx. 3.6 t
Condition: used
Scope of delivery: (See picture)
(Technical data and specifications are subject to change and errors!)
For further questions, please feel free to contact us by phone.
Annonse
Borken
964 km
Maskin for resonanstesting
SincoTecPOWER SWING 20 kN Mot Big Table
Ring
Tilstand: brukt, Type: POWER SWING 20 kN
Sincotec Resonance Testing System Power Swing 20 kN
Manufacturer servicing carried out
General information:
For sale is a used resonance testing system Power Swing 20 kN from the manufacturer Sincotec Test Systems GmbH.
The test bench was operated in single-shift operation, and all maintenance was carried out regularly by the manufacturer.
Special features:
- Robust design for continuous operation
- Precise resonance testing up to 20 kN
- Manufacturer-serviced
- Ideal for research, testing, and development applications
Technical data – Test Bench
Characteristic / Value
Total height (test bench): 1215 mm (without clamping fixture)
Width (test bench): 2005 mm
Depth (test bench): 1205 mm
Maximum force amplitude: 10 kN
Maximum total force: ±20 kN
Transducer accuracy: min. Class 1 (according to DIN EN 10002-3)
Technical data – Control Cabinet
Characteristic / Value
Total height (control cabinet): approx. 1800 mm
Tabletop height: 1080 mm
Control cabinet width: 650 mm (narrow tabletop) / 1450 mm (wide tabletop)
Control cabinet depth: 700 mm (narrow tabletop) / 800 mm (wide tabletop)
Weight: 152 kg (small tabletop), 187 kg (large tabletop), with (granite plate) 247 kg
Site requirements
Characteristic / Value
Required space: 4.3 × 3.0 m
Required ceiling height: 2.5 m
Floor load-bearing capacity: 234 N/cm²
Power supply requirements
Characteristic / Value
Voltage: 400 V three-phase, neutral conductor, and protective earth
Phase sequence: clockwise rotation
Voltage fluctuations: ≤ ±10 %
Short dips: < 20 ms
Limits for persistent interference: Radio interference class A in accordance with VDE 0871
Frequency: 50 Hz ± 1 %
Protective earth / grounding resistance: < 0.3 Ω
Bsdpoxrffaofx Anrodb
Connection and protection
Characteristic / Value
Power supply: 400 V / 50 Hz (clockwise phase sequence)
Connection plug: CEE socket, 5-pin, 16 A
Fuse: 16 A
Test bench weight: approx. 3.6 t
Max. clamping device weight: 250 kg
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data reserved!)
We are happy to answer further questions by phone.
Annonse
Völklingen
1 253 km
Tung dreiebenk
HERKULES2400X10000mm
Ring
Tilstand: brukt, Drei diameter over bed: 2400 mm
Drei diameter over saddle: 2200 mm
Turning length: 10,000 mm
Bdjdpfx Ansxddvnjrob
Drive power: 185 kW
Face plate diameter: 1650 mm
Spindle speed: 1.5 - 150 rpm
Max. workpiece weight: 70,000 kg
Clamping diameter: 1400 mm
Technical Data
Working Area
Max. turning diameter over saddle: 2200 mm
Max. swing diameter over bed: 2400 mm
Max. turning length: 10,000 mm
Clamping diameter in headstock face plate: 300 - 1600 mm (up to 2050 mm with special jaws)
Clamping diameter in tailstock face plate: 300 - 1400 mm
Max. workpiece weight: 70,000 kg
Main Drive / Face Plate
Face plate diameter: 2000 mm
Infinitely variable face plate speeds, 4 ranges: 1.5 - 150 rpm
Max. torque at nominal speed: 220,000 Nm
Main motor power: 185 kW
Flange centre point angle: 70°
Saddles
Travel of infeed slide: 500 mm
Travel of planing slide: 1,400 mm
Rapid traverse longitudinal: 2,000 mm/min
Rapid traverse crosswise: 800 mm/min
Stepless feed rates, longitudinal: 0.6 - 300 mm/min
Stepless feed rates, cross: 0.3 - 120 mm/min
Max. cutting force at saddle: 20,000 kg
Tailstock
Removable face plate diameter: 1650 mm
Face plate clamping diameter: 1400 mm
Flange centre point angle: 70°
Rapid traverse: 1,250 mm/min
Special Equipment
Copying device for first saddle:
- Copying length: 8,500 mm
- Max. copying depth in one pass: 500 mm
Boring device:
- Boring bar: 460 x 390 mm
- Boring diameter: 600 - 1,000 mm
- Max. boring depth in one pass: 2,700 mm
For Ks of 200 kp/mm² - s max. = 1.5 mm/rev
Max. chip cross-section: 30 mm² at an extension of 1,000 mm; with increasing boring depth the chip cross-section decreases accordingly
Taper turning attachment:
- Setting angle up to 8° and max. taper length (in one pass) of 2,000 mm, setting accuracy ± 5 minutes
- Setting angle up to 15° and max. taper length (in one pass) of 1,000 mm, setting accuracy ± 5 minutes
125 kg auxiliary crane on headstock.
Annonse
Neubrandenburg
820 km
CNC dreiebenk
EMCOTurn 365
Ring
Tilstand: svært god (brukt), EMCO TURN 365 – CNC lathes centre
For sale is an EMCO TURN 365 CNC turning centre in excellent technical condition, available immediately and ready for operation.
Year of manufacture: 2000
EMCO Turn 368/65
53,000 operating hours
Year: 2000
Chip conveyor
Drip tray
Maximum swing diameter over bed [mm]: ø600
Swing diameter over cross slide [mm]: ø360
Maximum turning diameter [mm]: ø310
Maximum part length [mm]: 520
Maximum bar passage [mm]: ø65
Centre distance (spindle nose – tailstock centre) [mm]: 669
X-axis travel [mm]: 210
Z-axis travel [mm]: 610
AC motor, power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22
Speed range (infinitely variable) [rpm]: 60 – 3200
Maximum torque (Sinumerik / Fanuc) [Nm]: 267 / 242
C-axis (rotational axis) on the main spindle
Rotational axis resolution [°]: 0.001
Rapid traverse Siemens / Fanuc [mm/min]: 1000 / 100
Automatic tailstock, hydraulically actuated
Tailstock travel [mm]: 500
Max. tailstock pressure [N]: 8000
Rapid traverse speed [m/min]: approx. 20
Tailstock quill taper: MT 4
Disk turret with directional logic, optionally with driven tools
Number of tool stations: 12
Tool holders according to DIN 69880 VDI 30
Tool cross-section for square tools [mm]: 20 × 20
Shank diameter for boring bars [mm]: ø32
Number of driven tool stations: 12
Rotational speed range [rpm]: 0 – 5000
Maximum drive power [kW]: 5
Maximum torque [Nm]: 20
• Control: Sinumerik 810D/840D (ShopTurn 6.4)
• Machine weight: approx. 4000 kg
• Installation dimensions (L × W × H): approx. 4000 × 2000 × 2000 mm
—
Condition & Scope of Delivery
The machine is in well-maintained condition. The offer includes comprehensive documentation including the operating manual.
• Inspection possible at any time
• Free loaded onto truck
• Delivery available upon agreement
—
Contact
Bsdpfxoxiy Uko Anrodb
Maschinenhandel Nord
Gerstenstraße 2
17034 Neubrandenburg
📞
All prices plus VAT. Subject to change and errors excepted.
Annonse
Oelde
965 km
Intern slipemaskin
BAHMÜLLERJES 12
Ring
Tilstand: brukt, Byggeår: 1983, Min. / max. internal diameter: 10 / 250 mm
Grinding depth: 400 mm
Max. external diameter: 380 mm
Swing diameter: 390 mm
Max. table travel: 550 mm
Minimum table stroke: 2 mm
Rapid traverse: 10 m/min
Table speed – stepless: 0 – 10 m/min
Coarse adjustment: 18 mm
Fine adjustment: 4 mm
Bdjdsvprxfopfx Anrjb
Max. workpiece weight: 100 kg
Spindle head: B 6 DIN 55021
Spindle speeds – stepless: 15 – 1,500 rpm
Max. swivel angle: +/- 30 degrees
Spindle bore: 50 mm
Drive power: 2 kW
Rapid traverse: 0 – 250 mm/min
Stroke: 70 mm
Drive power: 3 kW
Machine weight approx. 2.7 t
Required space approx. 3.0 x 3.0 x 3.2 m
Internal grinding machine
BAHMÜLLER - JES 12
- new control unit (July 2015)
Annonse
Balaguer
2 145 km
Konvensjonell dreiebenk
EcheaDN500
Ring
Tilstand: brukt, spindelboring: 150 mm, spindelmontering: MK 6, Conventional Lathe
Brand: ECHEA
Model: DN 500
Serial No.: 4.075
Distance between centers: 6,000 mm
Spindle bore: 150 mm
Swing over bed: 1,000 mm
Swing over gap: 1,300 mm
Swing over cross slide: 980 mm
Swing over carriage: 780 mm
Bdedpfx Anjyu Hyxorsb
Bed width: 670 mm
Number of speeds: 24 (4-520 rpm)
Tailstock quill Morse taper: 6
Hardened and ground bed.
400 mm bed gap in front of the chuck.
Powered carriage.
Two interchangeable tool posts for the carriage:
- Tool post with tool holder for conventional lathe operation (280x280 mm, for tools up to 80 mm height)
- Grinding attachment/tool post with 500 mm wheel and 10 HP motor - 1450 rpm
Includes:
- TdG 3-jaw chuck 500 mm with external, internal, and soft jaws
- Grinding attachment/tool post for 500 mm wheel and 10 HP motor - 1450 rpm
- Cable reel for powered carriage
- Coolant tank with pump
- 2 pcs. open steady rests with special anti-seizing pads, for workpieces approx. 250 mm diameter
- 1 pc. open conventional steady rest, for workpieces approx. 200 mm diameter
- 1 pc. closed conventional steady rest, for workpieces approx. 450 mm diameter
- Includes 23 grinding wheels for the grinding attachment, see photos.
Annonse
Bitburg
1 177 km
Vakuum løftere med Pilar jib kran
BarbaricUniwood B3 90 - 250 + SSK 250
Ring
Byggeår: 2025, Tilstand: ny, BARBARIC swing-arm vacuum lifter, including pillar jib crane
Equipment package
consisting of:
- uniWood B3-90 Degree – 250 Vacuum Lifter
Comfort model, with integrated chain hoist
reinforced, load capacity: 250 kg
Suitable for the vertical and horizontal handling of standard flat panels.
Vacuum generation via pneumatically operated ejector.
For lifting porous materials (MDF thicker than 8 mm), the
reinforced vacuum pump is installed.
-- Technical Data --
Lifting speed with chain hoist: 0–10 m/min
infinitely variable via frequency converter
Lifting height (operating range): 2.0 m
Chain length: approx. 3.5 m
Operating voltage: 230 V / 50 Hz
Operating pressure: 7 bar filtered compressed air required
Net weight: approx. 85 kg
-- Safety System --
The lifter is equipped with a vacuum gauge.
Load release via two-button operation
- BARBARIC Pillar Jib Crane
Bdedpjc Umftofx Anrsb
Load capacity 250 kg at the lifting device
Consisting of:
pillar, mounting console, and smooth-running jib arm.
Supplied with trolley and energy supply system.
Overall height: approx. 4.2 m
Lower edge of jib arm: approx. 3.5 m
Projection: 5 m
Slewing range approx. 250°
Manual slewing and trolley travel
Base plate with 700 x 700 mm and fastening materials.
Supplied with adhesive anchors for concrete floor.
A requirement for this mounting is a correspondingly reinforced concrete floor.
The static verification of the floor must be provided and documented by the client.
Other versions and lengths available on request.
Annonse
Bitburg
1 177 km
Langhullboremaskin / Rammpluggbor
Ganner GannomatJunior 323
Ring
Tilstand: nesten som ny (brukt), Byggeår: 2025, GANNOMAT "JUNIOR 323"
FRAME DOWEL AND SLOT MORTISER
Complete in standard configuration as per price list 01/22/D including:
- Precision collet chuck for ER 40 collets Ø 3–26 mm,
incl. collets Ø 10 / 13 / 16 / 20
- Motor 1.5 kW, 2800 rpm
- Position setting via digital counter
- Position adjustment for 2 levels, pneumatic (0–100 mm)
- Max drilling depth: 150 mm
- Precision indexing rail with 12 mm pitch, including:
- Central locking and cross adjustment 320 mm
- 2 pneumatic safety clamping cylinders
- Complete stop system consisting of:
1 central stop and 1 stop for extra-wide frames
1 stop bar approx. 850 mm long (can be switched from left
to right as a mirror image)
2 folding stops
- Height-adjustable slot mortising device with 2 program cams
(400V, 3Ph, 50Hz, 1.5kW)
Suction hood Ø 80 mm, dust-tested
Central mitre stop 45°
Pair of swing-out workpiece support arms (left and right)
Bodpjxdttijfx Anrsdb
Drill head mount
3-spindle drilling head, 32 mm pitch (can be rotated 90°)
Running gear with 4 castors for easy mobility of the machine
Available: At short notice - immediately -
Annonse
Nijverdal
911 km
Konig Mini Rex G2000
KönigG2000
Ring
Tilstand: brukt, Byggeår: 2008, König G2000 Compact System for round-moulded, dimpled, oval, or seam-rolled products. The compact proofing cabinet with an hourly capacity of approx. 2,500 pieces is the ideal solution for small-scale producers or in-store bakeries.
Compact pre-proofer system with Mini Rex Futura head machine
Maximum hourly output in proofer operation: 2,000–2,500 pieces, infinitely adjustable
For higher output without proofer operation, Mini Rex Futura can be swung out: 1,800–4,000 pieces, infinitely adjustable
König Mini Rex 4000 head machine SKG63-RK64
Weight range: 40–105 g
Single-row discharge belt for convenient manual removal
Proofer with 100 usable swing trays for max. 75 g dough piece weight each
Proofing time approx. 6 min at a capacity of 2,000 pcs/hour
Stüpfe device with easily replaceable stüpfe tools
Integrated seam-rolling long roller
Year of manufacture: 2008
Images taken BEFORE cleaning
Bodpjprgqpefx Anredb
Annonse
Bad Oeynhausen
921 km
Vertikal dreiebenk
HNKVTC-20/30
Ring
Tilstand: ny, Byggeår: 2025, dreiehøyde: 2 000 mm, emnevekt (maks.): 12 000 kg, frontplatens diameter: 2 000 mm, CNC Vertical Turning Center
Model: VTC-20/30 with Fanuc 31i-B
Table diameter: Ø2,000 mm
Max. swing diameter: Ø 3,000 mm
Max. turning height: 2,000 mm
Table speed: Max. 200 rpm
Table load capacity: 12,000 kg
Table indexing: 0.001°
Z-axis (vertical ram): 1,200 mm
Drive spindle speed: Max. 15 ~ 2,000 rpm
Ram size: 240 mm x 240 mm
Milling spindle taper: ISO 50
Tool shank size: 40 mm x 40 mm
Crossrail (vertical traverse path): 1,000 mm 250 x 4 steps (hydraulic)
Rapid traverse X-axis: 10,000 mm/min
Rapid traverse 7-axis: 10,000 mm/min
Cutting feed rate: 1 ~ 3,000 mm/min
Table drive motor: AC 45/55 kW (continuous / 30 min.)
Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.)
Control: Fanuc 31i-B
Display unit: 15-inch TFT-LCD
Tape memory: 1 MB
Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools)
Standard tool holder: new 240 TCR-01 (2 units)
Splash guard: table version (R-type standard design)
External coolant system: 3 bar (80 liters/min.)
Chip conveyor: hinge type
Bsdpfxoxqb D Nj Anrjdb
4-jaw independent hand chuck
Foundation anchor bolts / leveling plates
Maintenance tools and toolbox
Hydraulic power unit
Work area lighting
Signal lamp: 3 colors (green, red, yellow)
Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical documentation
Power supply: 220 V, 60 Hz, 3 phase
Machine color: manufacturer standard
OPTIONAL ACCESSORIES (#1)
Automatic Tool Changer (ATC) 24 positions – on request
Automatic shutoff for N.C – on request
Turning tool holder type 240TCR – on request
Through-spindle coolant supply: 30 bar (pump pressure) – on request
Transformer 415 V, 50 Hz, 3 phase – on request
Linear scales X-, Z-axis – on request
Rigid tapping – on request
Automatic Tool Changer (ATC) 24 positions – on request
Other:
INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING – not included in the price
INSURANCE AND FREIGHT – not included in the price
Errors in technical data excepted. The scope of accessories applies exclusively and only as described in the textual article description. No claim exists for accessories shown for visual purposes only.
The general terms and conditions of JS Werkzeugmaschinen GmbH apply.
Annonse
Borken
959 km
Roterende modul
Bosch Aventics
Ring
Tilstand: god (brukt), Bosch Aventics R412 000 393 dreielement serie RCM-SH R412000393
Bsdpfx Anslkbp Teredb
Produktets tilstand: Brukt, i feilfri stand
REGAL-K54-4-PD (BOR)
Flere dreielementer – nye og brukte – finner du i vår butikk!
Internasjonale fraktkostnader på forespørsel!
Annonse
L'alcúdia de Crespíns
2 476 km
Parallell dreiebenk
GurutzpeSuper A 400/6000
Ring
Tilstand: brukt, Funksjonalitet: fullt funksjonell, spindelboring: 82 mm, svingediameter: 820 mm, svingelengde: 6 000 mm, GURUTZPE lathe, model Super A, with 6,000 mm between centers, swing over bed 820 mm, over carriage 550 mm, in the gap 1,150 mm, spindle bore diameter 82 mm, motorized carriage, 16 speeds from 9 to 500 rpm, equipped with 3 fixed steadies.
Bodpfov Rm Iwex Anredb
Annonse
Gerolzhofen
1 183 km
Glidebordsag
HoKuTechp 450 ax
Ring
Tilstand: ny, p 450 ax for panel materials incl.:
Programmable saw blade height adjustment
Programmable saw blade tilt adjustment
Programmable rip fence adjustment
Motors: Main saw: 5.5 kW / 7.5 HP
Scoring unit with motor: 0.55 kW / 0.75 HP
General features p 450:
Sliding table made of anodized aluminum, incl. high-precision guideway made of hardened and ground steel
Sliding table locking in any position
Bdedswl N Twepfx Anrjb
Saw blade guard with swing-away device
Outrigger with adjustable cross-cut fence featuring length compensation at 10°, 15°, 22.5°, 30°, 45°, and 90°
Belt shifting for speed change from above (opening in the saw table)
Display for selected saw blade speed
Electrics and safety devices according to CE standards
Technical data:
Saw blade tilt: 0° to 45°
Table size: 1,030 x 680 mm
Sliding table size: 3,200 x 350 mm
Cutting length with scoring unit: 3,350 mm
Cutting width at rip fence: 1,100 mm
Max. cutting height with 450 mm saw blade: 90°: 155 mm / 45°: 110 mm
3 speeds: 3,000, 3,600 & 4,200 rpm
Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP
2 extraction ports
Cross-cut fence extendable to 3,600 mm
Tillitsmerke
Autoriserte forhandlere sertifisert av Machineseeker

Annonse
Walton-on-the-Naze
1 057 km
Thermo Electron Corporation CR 4i Kjølesentrifuge
Thermo electron CorporationCR 4i
Ring
Tilstand: brukt, Denne oppføringen gjelder en Thermo Electron Corporation CR 4i kjølt sentrifuge.
Spesifikasjoner:
Kapasitet:
Swing-out rotor: (4 x 750 mL) totalt 3000 mL
Fastvinkelrotor: (8 x 100 mL) totalt 800 mL
Maksimal last: 3,6 kg
Bdedpfxexzhhie Anreb
Turtallsområde: 500 til 7800 o/min
RCF-område: 20 til 9900 x g
Temperaturområde: -9°C til 40°C
Mål (H x B x D): 45 x 85 x 66 cm
Vekt: 106 kg
Elektrisk: 120V, 60 Hz
Annonse
Duxford
1 063 km
Domnick Hunter Nitrox Z UHPZN1001 Nitrogengenerator
Domnick HunterNitrox Z UHPZN1001
Ring
Tilstand: brukt, Dette tilbudet gjelder en Domnick Hunter Nitrox Z UHPZN1001 nitrogen-generator.
Enheten er i full drift og klar for umiddelbar levering.
Leveres med eske med tilbehør.
Bdodpfx Aoxx Agusnrjb
Oppdag kraften av høy-renhets nitrogen med Domnick Hunter Nitrox Z UHPZN1001 nitrogen-generator. Denne enheten er utviklet for pålitelighet og effektivitet, og er den ideelle løsningen for laboratorier og industribedrifter som krever en kontinuerlig forsyning av nitrogen med ultrahøy renhet.
Nøkkelfunksjoner:
• Høy renhet: Nitrox Z UHPZN1001 leverer nitrogen med en renhetsgrad på 99,9999 %, noe som sikrer optimal ytelse for sensitive applikasjoner innen kromatografi, farmasi og lignende.
• Avansert Pressure Swing Adsorption-teknologi: Ved å benytte avansert teknologi fjernes oksygen, fuktighet og andre forurensninger effektivt, og du får en jevn og pålitelig nitrogentilførsel.
• Kompakt design: Den kompakte utformingen muliggjør enkel integrering i laboratorie- eller produksjonsmiljøer, maksimerer arealutnyttelsen og opprettholder høy ytelse.
• Brukervennlig styring: Det intuitive kontrollpanelet med digitalt display gjør overvåking og justering av innstillinger enkelt og effektivt, noe som øker driftseffektiviteten.
Tekniske spesifikasjoner:
• Nitrogenkapasitet: Opptil 1.000 liter per time – dekker ulike behov.
• Utløpstrykk: Justerbart etter spesifikke krav.
• Strømforsyning: Lavt energiforbruk gir kostnadseffektiv og bærekraftig drift.
Fordeler:
• Kostnadseffektiv løsning: Unngå bruk av høytrykks gassflasker – reduser løpende kostnader og øk sikkerheten på arbeidsplassen.
• Fleksibel bruk: Ideell for laboratorier, produksjon og forskningsinstitusjoner – Nitrox Z dekker ulike behov for nitrogenforsyning.
• Vedlikeholdsfri drift: Krever minimalt vedlikehold og sikrer kontinuerlig nitrogentilførsel slik at du kan fokusere på kjernevirksomheten.
Domnick Hunter Nitrox Z UHPZN1001 nitrogen-generator er den foretrukne løsningen for produksjon av nitrogen med høy renhet. Opplev økt produktivitet, sikkerhet og kostnadsbesparelser i ditt laboratorium eller produksjonsmiljø allerede i dag!
Annonse
Duxford
1 063 km
Sorvall Heraeus 75002000 sentrifugerotor med bøtter
Sorvall Heraeus75002000
Ring
Tilstand: brukt, Denne oppføringen gjelder en Sorvall Heraeus 75002000 sentrifugerotor med bøtter.
Enheten er i full driftsmessig stand og klar for umiddelbar levering.
Leveres med 4 stk. 75002002 runde bøtter.
Oppgrader laboratoriets sentrifugeringskapasitet med Sorvall Heraeus 75002000-rotoren, designet for effektiv ytelse i ulike applikasjoner.
Nøkkelfunksjoner:
Produsent: Sorvall Heraeus – kjent for pålitelighet innen laboratoriesentrifugering.
Delenummer: 75002000 – sikrer at du har riktig rotor til dine spesifikke behov.
Maksimal hastighet: Kan nå opptil 4 700 o/min for effektiv og rask prøvelseparasjon.
Rotortype: Swing Bucket Rotor-design gir jevn drift og optimal pelletisering av prøver ved at bøttene svinger ut under sentrifugering.
Kapasitet: Tar 4 x 400 ml prøverør, noe som gjør den egnet for applikasjoner med middels volum.
Bdjdpfx Anexxy Ucsrsb
Maks lastekapasitet: Konstruert for maks belastning på 540 g, og sikrer stabilitet selv ved tyngre prøver.
Maks RCF: Oppnår en maksimal relativ sentrifugalkraft (RCF) på 4618 x g, effektiv for et bredt spekter av laboratorieseparasjoner.
Kompatible sentrifuger:
- Sorvall Legend Mach 1.6
- Heraeus Multifuge 1S
Annonse
Duxford
1 063 km
Cytiva AxiChrom 300/300 kromatografikolonne
Cytiva (formerly part of GE Healthcare Life Sci...AxiChrom 300/300
Ring
Tilstand: brukt, Denne oppføringen gjelder en Cytiva AxiChrom 300/300 kromatografikolonne.
Enheten er i full drift og klar for umiddelbar bruk.
AxiChrom er en serie lavtrykk, aksialkompresjons-kromatografikolonner utviklet for prosessutvikling og produksjon av biofarmasøytiske produkter. Kolonnene er bygd for GMP-kompatibel bruk og kan skaleres fra laboratorie/pilot til fullskala produksjon.
300 mm indre diameter (i.d.)
Bedpexhdwyjfx Anrodb
300 mm pakkesenghøyde (kolonnelengde) eller tilsvarende pakkesengvolum
Funksjoner:
- Aksial kompresjonspakking (intelligent pakking): ferdigprogrammerte/automatiserte pakkemetoder sikrer reproduserbar pakkesengtetthet og ytelse.
- “Swing-out”-rør eller bevegelige adaptere: For store diametre (≥ 300 mm) kan kolonnerøret svinges ut for enkel tilgang til pakkesengstøtter, tetninger og O-ringer.
Rengjøring / desinfisering / GMP-krav:
- Deler (både «fuktede» og trykkbærende) kan spores per batch, og materialer er i samsvar med USP Class VI, 21 CFR part 177 og EMEA-reguleringer.
- Rengjøring og desinfisering er mulig, inkludert behandling med 1 M NaOH, effektivt for fjerning av mikrober og endotoksiner.
Fleksible konfigurasjoner: Tilbys med ulike pakkesenghøyder (vanligvis ~10‑50 cm for store diametre) og ulike typer pakkesengstøtter.
Vi gjør det enklere for deg å søke: "rcm swinger"
Du får nye tilbud på e-post umiddelbart og gratis.
Du kan når som helst enkelt avslutte søkeoppdraget.





















































































































































































































































