Kjøp brukt Automatica Rotasjonsmater Rotasjonsanlegg (435)

Tilstand: brukt, Nr. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, year of manufacture 2017 Thermal treatment plant / thermal chamber for modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on wood thickness and species. The system features a high-performance energy and heat transfer system and operates with a gas- or oil-fired boiler, using thermal oil as the heat transfer medium. Technical data: Capacity: 5,950 - 9,900 m³ of wood per year (with 330 working days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Cedpfx Apsv Si Szjderf Autoclave material: 10 mm duplex stainless steel EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave where thermal treatment takes place 2. Vacuum system to evacuate the autoclave before heat is introduced 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: stainless steel tubes (seawater-resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heater module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Function description: 1. Loading the autoclave with wood 2. Creating a preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Creating a final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Designed according to EN 13445 Sale on behalf of customer, ex works near 5020 Salzburg (Austria), without disassembly, transport, or installation Disassembly, loading, and transport by us possible on request Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place as is Technical details, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or prior owner, without guarantee Subject to prior sale For used machinery, all warranties are excluded; sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Tilstand: god (brukt), Byggeår: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter and machine enclosure/tray. Crodpfxjfrbckj Apdof Complete machine documentation available.

Tilstand: ny, Byggeår: 2025, dreiehøyde: 2 000 mm, emnevekt (maks.): 12 000 kg, frontplatens diameter: 2 000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø 3,000 mm Max. turning height: 2,000 mm Table speed: Max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (vertical ram): 1,200 mm Drive spindle speed: Max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical traverse path): 1,000 mm 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: new 240 TCR-01 (2 units) Splash guard: table version (R-type standard design) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge type 4-jaw independent hand chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical documentation Power supply: 220 V, 60 Hz, 3 phase Cedjxqb D Nopfx Apderf Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic Tool Changer (ATC) 24 positions – on request Automatic shutoff for N.C – on request Turning tool holder type 240TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Linear scales X-, Z-axis – on request Rigid tapping – on request Automatic Tool Changer (ATC) 24 positions – on request Other: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING – not included in the price INSURANCE AND FREIGHT – not included in the price Errors in technical data excepted. The scope of accessories applies exclusively and only as described in the textual article description. No claim exists for accessories shown for visual purposes only. The general terms and conditions of JS Werkzeugmaschinen GmbH apply.

Tilstand: ny, Byggeår: 2025, driftstimer: 1 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: EY-45K-SA, totalvekt: 1 220 kg, drivstofftype: diesel, tankkapasitet: 120 l, farge: grønn, effekt: 40,89 kW (55,59 hk), utgangsstrøm: 65 A, utgangsspenning: 400 V, utgangsfrekvens: 50 Hz, type utgangsstrøm: trefaset, nominell effekt: 41,5 kW (56,42 hk), nominell (tilsynelatende) effekt: 49 kVA, kontinuerlig effekt: 36 kW (48,95 hk), kontinuerlig tilsynelatende effekt: 45 kVA, total lengde: 2 400 mm, total bredde: 924 mm, total høyde: 1 490 mm, rotasjonshastighet (maks.): 1 500 o/min, motordesigner: Kohler, type kjøling: vann, Aggregatstore/Van Delft Staal Energy Generator EY-45K-SA 6 kVA Stage V Energy Generator EY-45K-SA er et kraftig 45 kVA KOHLER dieseldrevet aggregat som selges hos Aggregatstore/Van Delft Staal. Aggregatet er designet for stabil strømforsyning ved enhver strømstans. Takket være den moderne KOHLER Stage V-dieselmotoren oppfyller denne generatoren de strengeste utslippskravene, med minimal utslipp og optimal drivstoffeffektivitet. Credszd Aw Rspfx Apdsf EY-45K-SA er utstyrt med AVR-teknologi (Automatic Voltage Regulation) som sikrer jevn og stabil spenning, ideelt til drift av sensitivt utstyr. Dette dieseldrevne aggregatet arbeider stillegående, effektivt og er konstruert for langvarig driftssikkerhet—akkurat det du forventer av Van Delft Staal. Fordeler og alternativer oppsummert: - Effekt: 45 kVA / 36 kW PRP - Standby-effekt LTP 49,5 kVA / 39,6 kW - Stage V utslippsnorm – miljøvennlig og kraftig - 1500 o/min - Stillegående, drivstoffgjerrig og vedlikeholdsvennlig - AVR-system for stabil spenning - Innvendig belysning med sensor - Motorens kjølevæskeforvarming fra 0 til 450 kVA - Manuell oljebyttepumpe opp til 300kVA - Dobbelt isolasjonskontroll - Hovedstrøms batterilader og motorforvarming - Tilkobling for kommandosignal for ekstern ATS - ATS automatisk overføringsbryter for off-grid system og automatisk omkobling ved strømbrudd - Tanklokk med lås - Perfekt som aggregat ved strømbrudd eller til mobil strømforsyning Alle våre generatorer leveres klare til bruk. 1 års garanti. Vi tilbyr også service og vedlikehold.

Byggeår: 2020, Tilstand: god (brukt), Remmert LaserFLEX | fully automatic loading and unloading – used - : Price ex location: now only €119,000 instead of €145,000 (net) plus disassembly etc.! Manufacturer: Remmert Type: LaserFlex Year of manufacture: approx. 2020 Format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet size: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (the storage system is not included in the sale) Original new price: €250,000 (net) Crjdjwga E Tepfx Apdsf Manufacturer’s description: Equipped with two automation units – one loading and one unloading unit – the LaserFLEX enables decoupling of the loading process of a laser cutting system. After the cutting operation, a fork unit lifts the processed metal sheet from the change table. At the same time, a new sheet is conveyed from the connected storage by a vacuum unit. As soon as the plate is positioned next to the laser system, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With the LaserFLEX, the downtime of the integrated laser cutting systems is reduced to nearly zero, as even high-speed laser machines are optimally supported. Special features: • Exchange time about one minute (for 3015 format) • Highly automated production processes • Decoupling of loading and unloading of the laser cutting system • Manufacturer-independent integration of laser systems • Flexible storage design with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in series configuration • Integration into existing storage and production environments • Intuitive graphical touchscreen operation with visual status management • Modern industrial design Fast, flexible solution for automation of laser systems Increase productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet metal cut-outs Efficient supply and removal for multiple laser systems Intuitive graphical touchscreen operation with visual status management Innovative, modern industrial design Condition: good Availability: immediately Location: 46419 Isselburg

Tilstand: ny, Byggeår: 2024, Fabrikat: DURMA Type: HD-F 3015 III Fiber Year of manufacture: Available to order new (delivery time 6 – 8 weeks) Working area X-Y-Z: 3060 x 1530 x 160 mm Laser power: 6000 Watt IPG Control unit: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness – mild steel: 25 mm Sheet thickness – stainless steel: 15 mm Sheet thickness – aluminium: 20 mm Sheet size: 3048 x 1524 mm Load weight: 200 kg/m² X-Y axis speeds: 100 m/min X-Y axis simultaneous speed: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation dimensions L/W/H: approx. 14500 x 7500 x 2420 mm Weight: approx. 12,000 kg Standard equipment - Automatic pallet changer - Sinumerik 840D control - Precitec Procutter F150 focus automatic focus cutting head - Automatic sheet position and size measuring system - Automatic nozzle cleaning - Position laser diode - Central lubrication - User-friendly parameter interface (power-speed-pressure) - External CAD/CAM programming software with auto-nesting, optionally Lantek software - Work area lighting - Signal beacon - Multi-chamber extraction system - Special laser cutting options - Remote maintenance - CE marking Extended equipment Cjdpfxofkpams Apdsrf - IPG fiber laser source 6000 Watt including chiller - Filter, Vanterm compact extraction system - Motorized chip conveyor for small parts/scrap - Laser service kit - Cloud license - Lantek Expert Inside software - Lantek software with positioning laser diode and automatic sheet layer detection, measurement - Pierceline - Focusline

Tilstand: ny, WMD45A ROGI Bore- and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout, brand SINO * Automatic longitudinal feed for the work table Cedpfx Ajga Tyzepdsrf * Drill chuck with ISO30 - B16 arbor * Left / Right switch * Spindle protection * Fine adjustment * 2-speed motor * Ejector drift * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head motorized height adjustment * Various tools in case

Tilstand: brukt, Byggeår: 2009, Full-automatic 4-clamp perfect binder from HORIZON This versatile perfect binder is ideally suited for medium and small print runs as well as single-copy production. With its user-friendly operation and flexible application possibilities, the Horizon BQ-470 is the ideal choice for your bindery. Crsdpjycftgsfx Apdjf Special Features: - Intuitive operation via 10.4-inch color touchscreen ensures that even less experienced operators can easily produce high-quality bindings - Advanced rotary suction feed system enables faster production by handling a wide range of cover materials without marking - Automatically adjustable creasing position (4 lines) guarantees professional binding results with crisp, square spines Specifications: - Book block size: Max. 320 x 320 mm, Min. 145 x 105 mm - Book thickness: 1 to 65 mm - Cover size: Max. 320 x 660 mm, Min. 135 x 225 mm - Cover weight: 81.4 to 302.4 g/m² (uncoated), 104.7 to 348.9 g/m² (coated) - Production speed: Up to 1,350 cycles per hour (EVA), up to 1,000 cycles per hour (PUR) All-inclusive package We take care of everything: from secure packaging to transport and customs clearance. Upon request, we can also provide you with a customized leasing offer. Sustainable and cost-effective Choose a pre-owned machine and enjoy double benefits: save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Tilstand: brukt, Byggeår: 2007, Offset 5 colours with perfecting + coating unit Heidelberg CD74-5-P+LX - C Year of manufacture: 2007 Impressions (millions): 250 Machine Control - CP 2000 - Prinect Axis Control Printing Units - Number of printing units: 5 - Perfecting press: 2/3 - AutoPlate - Alcolor dampening system - Automatic ink roller wash-up device - Automatic blanket wash-up device - Automatic impression cylinder wash-up device - Dampening system: Technotrans beta.c - Ink unit temperature control Coating - Number of coating units: 1 - Tresu chambered doctor blade system - Number of anilox rollers: 1 Drying - DryStar: DryStar 2000 IR + hot-air Delivery - Powder unit: PowderStar Accessories - Air supply cabinet: AirStar - Compressed air compressor: Atlas Copco Csdpfx Apsv Rx A Hjdsrf

Tilstand: ny, Borediameter variable mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Weight: 1500 kg Dimensions (L/W/H): 4800x1600x2400 mm Width with support: 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on type and configuration, you can: - Drill handle olives in loose frame sections or for finished sashes, with multi-spindle drilling head, quick-changeable, also for milling fittings of lock box for RC2 or intermediate gear units - Drill corner bearings in loose frame sections, with multi-spindle drilling head, quick-changeable, corner-oriented via stop or to dimension (tilt windows) - Drill vertically from above for fittings, pilot drilling for clip on loose frame sections - Mill vertically from above for handle set, profile cylinder, 3D hinge fitting - Drill horizontally with 2 drilling units, different bore diameters, dowel drillings on end and longitudinal sides, transoms/mullions, bars, corner connections, front door, etc. - Mill horizontally for lock box / fittings, etc. Machine Description Basic frame: robust welded construction, linear guide for X-axis Table support: 3,000 x 200 mm 6 pneumatic clamping cylinders with automatic retract function 2 side stops for end-face machining, manually swivel in/out 2 longitudinal stops, manually swivel in/out Travel distances: X axis – 3,000 mm usable length Y axis – 180 mm Z axis – 105 mm Units: 1 vertical drilling unit (Unit 1) from above, drilling motor 1.1 kW, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 1 vertical drilling unit (Unit 2) from above, drilling motor 1.1 kW, speed 3,000 rpm, with quick-change drilling head system - 1 Drilling head BKF 3, Olives, quick-changeable - 1 Drilling head BKF 3/2, Corner bearing, quick-changeable 1 vertical milling unit (Unit 3) from above, milling motor 2 kW, 1,500 - 16,000 rpm, collet chuck ER 25 2 horizontal drilling units (Unit 4 and 5) 1.0 kW, 1,500 - 12,000 rpm, collet chuck ER 20 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 - 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control (X, Y, Z) NC positioning controller: Manufacturer B+R – input via 10” TFT display Machine complete with 1 set of drill tools: diameters 6, 8, 10, and 12 mm, 2 roughing/finishing carbide cutters dia. 16 mm, CE compliant, ready for connection Extraction ports: 1 x dia. 120 + 1 x 80 Power connection: 1 x 400 V, 16 Ampere Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right/left with NC axis high/low, programmable control, thus measurement input according to rebate/light size possible Dimensions: LxWxH = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price in above configuration, ex works: on request Plus freight and installation/commissioning Cjdod Ih Hqjpfx Apderf (Technical specifications according to manufacturer – subject to change without notice!)

Tilstand: ny, Byggeår: 2023, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 960702A20v3001, totalvekt: 200 kg, total lengde: 1 115 mm, total bredde: 555 mm, total høyde: 450 mm, volumstrøm: 280 m³/t, effekt: 7,5 kW (10,20 hk), inngangsspenning: 220 V, inngangsfrekvens: 50 Hz, type innstrømsstrøm: Klimaanlegg, type kjøling: vann, rotasjonshastighet (maks.): 1 500 o/min, garantiperioden: 12 måneder, beskyttelsestype (IP-kode): IP55, Leybold Sogevac SV 300 B ATEX Cat. 2 INT Sonder1 GB – NEW, unused, immediately available We are offering a new Leybold Sogevac SV 300 B rotary vane vacuum pump with ATEX Category 2 (internal) and water cooling. The pump is no longer in its original packaging but has never been used and is in technically and visually pristine, as-new condition. Ideal for demanding applications in the chemical, pharmaceutical, and food industries, as well as any area with an explosive atmosphere. Technical data • Model: SV 300 B WATER ATEX Cat. 2 INT Sonder1 GB Codezkaw Ujpfx Apderf • Design: Single-stage, oil-sealed rotary vane vacuum pump • Pumping speed: approx. 240 m³/h (50 Hz) / 290 m³/h (60 Hz) • Ultimate pressure: down to 0.08 mbar • Cooling: Water cooling (min. 600 L/h, max. 30 °C) • Certification: ATEX II (i) 2G b IIB 180 °C (50 Hz) / T3 (60 Hz) – for use in indoor environments • Operating temperature: Ambient 10–50 °C • Connection: 3-phase, IEC motor • Condition: As new, unused, not in original packaging Key features • ATEX-compliant design for use in explosive atmospheres • Robust, durable construction – ideal for continuous operation • Low noise and vibration levels • Integrated oil mist separator with automatic oil return • Service-friendly thanks to easy access to all components Typical applications • Chemical process engineering • Pharmaceutical manufacturing • Food processing • Packaging and drying processes • Laboratory and research applications • General industry with ATEX requirements Additional information: Sale price: On request Delivery: possible / collection by arrangement Scope of delivery: Pump, original documentation, accessories as supplied by the manufacturer

Tilstand: brukt, Pressmaskin, REMS Power-Press XL ACC, brukt utstyr Produsent: Rems Modell: Power-Press XL ACC Pressområde: Ø 10 – 108 mm (opptil 110 mm) Pressekraft: 32 kN Motor: 450 W universalmotor Strømforsyning: 230 V eller 110 V, 50–60 Hz Vekt: ca. 5,5 kg Mål (H x B x D): 800 x 335 x 230 mm Csdpfx Apsxlp T Isdjrf Kabelengde: 2900 mm Tilbehør: mer enn 400 typer REMS pressbakker, adaptere for andre fabrikanter Ytterligere egenskaper: Automatisk tilbaketrekking (Automatic Circuit Control – ACC) Roterbart pressbakkeholder med automatisk låsesperre Kompatibel med pressbakker fra andre produsenter Rask pressing, f.eks. Geberit Mapress rustfritt stål Ø 108 mm kobling på 15 sekunder Pressbakker: 76.1; 88.9; 108 mm

Tilstand: brukt, Armeringsbøyer, Betongstål bøyemaskin, Alba DAR 45, Brukt maskin Produsent: Alba (Spania) Type: DAR 45 (Dobladoras Automáticas) Totale mål: Bredde: 1300 mm Dybde: 800 mm Høyde: 830 mm Vekt: 555 kg Elektriske data: 400 V Maks bøyerdiameter: Ø 45 mm (enkeltstang, for stål med 450 N/mm²) Crodpey Rh Rfjfx Apdjf Bøyemodus: 2 hastighetsnivåer (høyere hastighet for mindre diametre)

Tilstand: brukt, Byggeår: 2012, Nr. 3268 Schirmer BAZ 1000-G6 / VU “Basic” Cutting and Processing Centre Used, Year of manufacture: 2012 Comprising: - Schirmer BAZ 1000-G6 / VU “Basic” cutting and processing centre - Schirmer SZA 450 automatic steel cutting unit - Schirmer buffer screw-in station - Schirmer SBZ I bar processing centre Schirmer BAZ 1000-G6 / VU “Basic” Cutting and Processing Centre: - Cutting length: 300 – 3,900 mm - Automatic feed magazine for 9 profiles, maximum length 6,500 mm - Automatic transfer station - Feed unit for PVC profiles up to 6,500 mm in length, with NC-positioned gripper, positioning speed up to 150 m/min - Profile length measuring device including optimisation software - Automatically adjustable profile guides - Processing station designed as G-Module “Ultra Speed” Processing operations on PVC profiles: - Drainage and ventilation slots/bores in sash, frame and transom profiles, handle drilling for entrance doors, striker marking, mortise pocket milling for lock cases - Height measuring unit for detection of profile tolerances - Gasket cutting device - VU saw unit with twin saw assemblies, 2 x 45° - Standard saw unit with one saw assembly, pivoting range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripper for bar offloading, positioning speed up to 180 m/min - PC machine controller: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulation buffer for transfer of profiles to steel insertion and screw stations; steel insertion station with 8 insertion slots - Monitor for steel length display - Automatic label printer Schirmer SZA 450 Automatic Steel Cutting Unit: - Automatic feed magazine, max. profile length 6,000 mm, profile width 25–50 mm, profile height 15–60 mm, wall thickness max. 4 mm - Feed unit - Standard saw unit for 90° cuts - Automatic bar offloading - Belt conveyor - Draw-out device - Steel offcut processing - Steel length measurement in feed magazine Schirmer Buffer Screw-in Station: - Feed unit for PVC profiles up to 3,900 mm - Automatically adjustable profile guides - Screw-driving station - Steel insertion finger for reinforcement profiles up to 200 mm insertion depth Schirmer SBZ I Bar Processing Centre: - Feed unit for PVC profiles up to 3,900 mm - Automatically adjustable profile guides - Touch probe for automatic detection of the zero point at profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, 1 axis for X-feed - NC-controlled gripper for bar offloading - Special belt conveyor for lateral discharge - Closure component visualisation software including monitor - Screw-driving station with automatic screw feeder - Helmet rail with balancer for bar screw assembly - Bar screw assembly with automatic screw feeding Csdpjy Nnnnjfx Apderf System performance: Approx. 120 window units 1400 x 1500 mm / 8 hours If a further screw-assembly unit is installed in the buffer screw-in station, output increases to approx. 160 units / 8 hours Sale on behalf of the customer, ex site near 30625 Hanover, without dismantling, transportation and installation. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. For used machines, all warranties are excluded. Sale is “as inspected and approved”.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Byggeår: 2018, TIMAC TZZ-1604 Circular Disc Cutter with Double-Station Automatic Stacker. Year 2018 Inspected and ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double-station automatic stacker that allows continuous operation without stoppages. Especially suitable for the manufacture of ends and lids, circular parts, and blanks for deep-drawing or stamping processes. Main features: • Circular cutting by adjustable blades • Diameter adjustment system for various disc formats • Double-station automatic stacker  Suction cup arm for picking up each disc  Possibility to remove full stacks without stopping production  Doors with latches and safety interlocks • Integrated electrical and pneumatic system  Independent electrical panel  PLC control  Safety compliant with CE regulations Crsdoy Edk Rspfx Apdof Main technical data: • Sheet thickness:  Up to 3 mm (carbon steel / aluminium)  Up to 1.5 mm (stainless steel) • Blade diameter: 100 mm • Installed power: approx. 16 kW • Electrical supply: 400 V / 50 Hz • Pneumatic pressure: 6 bar • Year of manufacture: 2018

Tilstand: svært god (brukt), CNC MACHINING CENTER (POINT-TO-POINT) - 4 AXIS Gantry-type design Control unit: Power Control – Software: woodWOP Safety enclosure for the operating head Clamping table with 6 consoles Safety tread mats LASER positioning system on the X-axis for console alignment and on the Y-axis for positioning of vacuum clamps Automatic tool changer system 2 disc changers – magazine/tool positions W8 (8 at the rear) + (8 on the side) Maximum working area (X - Y - Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones – 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electrical control cabinet and control unit Total connected load: 32 A WORKING UNITS (TOP): - 12 independent vertical drilling spindles (High Speed 7500) - 6 independent horizontal drilling spindles (4 on X axis + 2 on Y axis) - Drilling head motor power (kW): 2.3 Crjdpjyxn Tijfx Apdjf - 1 grooving saw unit, diameter 125 mm, N1 – swivels 90° in X-Y direction - 1 vertical main spindle (milling unit) HSK 63: 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindle) BARCODE READING SYSTEM PACKAGE PROFESSIONAL

Tilstand: svært god (brukt), Byggeår: 2023, driftstimer: 450 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 1589 / 1590, sagbladets diameter: 500 mm, Full-automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - V combines precise sawing and punching in one continuous, automated process. Based on the proven Profilma 502 model, this machine is ideally suited for high production volumes, complex machining, and processing of material bundles. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing Area & Feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Infinitely variable speed control Saw cut from below, motorized feed Material feed: 3–800 mm, reversible up to 4,000 mm Ball screw with servo drive and round rail guidance Remnant piece: from 75 mm (saw mode), from 80 mm (punching/sawing mode)* Punching Unit: Vertical hydraulic punching unit (discharge side) with automatic oil cooling Punching force: 300 kN Stroke: 20 mm Double stroke cycle time: 2–3 seconds Slug ejection into frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure reduced) 3 chip extraction ports Ø 100 mm, floating contact for extraction system control Minimum quantity lubrication unit with 2x 3 litre tanks and fill level indicator Noise protection package: hood and saw blade guard internally insulated Roller conveyor (740 mm) with access protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening protective hood Saw blade housing under table top Max. Cutting Range: Profile height: up to 65 mm Profile width: up to 170 mm Technical Data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm 2 machines available ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options tailored to your needs. Whether down payment, instalments, or individual financing models – together we'll find the right solution. Upon request, we can also handle the entire transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please feel free to contact us for further information or a non-binding offer. We provide professional and personal advice. Cedpfxjyyz Ebj Apdorf Subject to prior sale, changes, and errors!

Tilstand: verkstedoverhalt (brukt), Byggeår: 2006, vandring X-akse: 5 500 mm, vandring Y-aksen: 1 400 mm, bevegelsesavstand Z-akse: 1 000 mm, spindelhastighet (maks.): 5 000 o/min, spindelhastighet (min.): 15 o/min, bordbredde: 1 200 mm, bordlengde: 6 000 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2006 Capacities / Travel distances: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Cross (Z): mm 1,000 Clamping Table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on table surface: units 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC Rotary Table: Position: Right, flush-integrated into table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: units 9 Size of T-slots: mm 22 Distance between T-slots: mm 100 Painting: RAL 7035 light grey / RAL 5011 steel blue Tool Holder: ISO 50, DIN 69871 AD Pull Stud: DIN 69872 Form A Main Drive: Drive Power: 100% DC KW28 Spindle speed range: Spindle speed: rpm 15–5,000 Torque: Nm 815 Feed rates: X, Y and Z axes mm/min 2–10,000 Max. rapid traverse rate: X, Y and Z axes mm/min 25,000 Crodpfxsy Tkgbe Apdsf Max. feed force: N 10,000 FLC6000 Footprint: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE Diagonal Milling Head Automatic Tool Changer Chip Conveyor Coolant System with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. Machines available in this line are sourced by us through a stringent selection process and subjected to a thorough inspection (Deep-Dive Check). After intensive cleaning, any identified deficiencies and faults are expertly repaired by our professional service team.

Tilstand: verkstedoverhalt (brukt), Byggeår: 1996, maskin-/kjøretøynummer: 6672311, Ref. 5141 Polar Mohr Stack Lifter L-1000-W-6 => reconditioned for ergonomic operation at a user-friendly working height Technical data Control panel Sensor-controlled height adjustment Trough size: 100 x 145 cm Maximum load capacity: 1,000 kg The sensor-controlled lifting of the material allows the operator to handle material at an ergonomically optimal working height, feeding it either to an automatic jogger or directly into the cutting machine. The stack lifter can also be used for destacking the cut material. Lowering the material is semi-automatic: this means the process is started manually and stops automatically. The POLAR stack lifter does not require floor anchoring, making it flexible in use. Customer benefits: - Increases the productivity of the cutting machine by up to 10%, as the loading and unloading height remains constant - Minimizes the lifting of heavy loads - Ensures consistently high operator performance - Significantly reduces occupational diseases Csdpfx Ajtgupcopdorf

Tilstand: helrenovert (brukt), Byggeår: 2025, Schaudt PF61 1000 – 4000 Grinding length: 1,000 / 2,000 / 3,000 / 4,000 mm Centre height: 260 mm Additional selectable options: Cedpfx Apsiqxt Hsdsrf - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast setup via GSN operator interface - Diatronic measuring unit - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Centre height extension - Dressing spindle for diamond profile roller - Balancing and touch sensors - Hydraulic tensioning/releasing of tailstock - Automatic Siemens door drive - 19" / 22" monitor - Remote maintenance - Conversion to needle nozzles - Matching coolant / extraction system - Automation-ready - and much more We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella etc.

Byggeår: 2020, Tilstand: god (brukt), Ca. 8 – 10 units of throughput scales / automatic scales for use in a conveyor system, Mettler Toledo – used – Price per unit: €2,950 ex works (net), dismantled, packed, and loaded! Manufacturer: Mettler Toledo For example (a more detailed list will follow): Pos. 48 Automatic Scale Year of manufacture: 2020 Type: C 21 TLW250Cargo Max. 35,000 grams Min: 100 grams T = -35,000 g 230V Belt width: approx. 49cm Element width: approx. 55cm Length: 1.07m Terminal / Display: ICS469d-cargo ICS4x9-1 110–240V – 50/60Hz, 300mA Without position number: Automatic Scale Year of manufacture: 2014 Type: ICS469-100 Max. 40,000 grams Min: 200 grams D = 5g T = -40,000 g 230V Without position number (suspended from the ceiling): Automatic Scale Year of manufacture: 20?? Type: C21 TLW250 Cargo Type: LCC300 Max. 300kg Min: 200 grams D = 5g Csdpfx Asq U Rq Hjpdjrf T = -40,000 g 230V

Tilstand: ny, Byggeår: 2022, maskin-/kjøretøynummer: 30.06.005.22, Funksjonalitet: fullt funksjonell, effekt: 19 kW (25,83 hk), inngangsspenning: 400 V, kuttebredde (maks.): 4 300 mm, sagbladets diameter: 320 mm, Utstyr: CE-merking, dokumentasjon / manual, doseringsanlegg, rotasjonshastighet trinnløst variabel, sagbladbeskyttelse, Vi tilbyr denne nye, helautomatiske kappesagen Mayer Kappa Automatic 80, produsert i 2022. Csdpfx Apezphc Nodorf Hvis du har spørsmål eller trenger mer informasjon, kan du gjerne sende oss en melding eller ringe oss.

Tilstand: verkstedoverhalt (brukt), Byggeår: 2000, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter permitted above carriage: 160 mm Center height above carriage: 83 mm Maximum diameter above bed: 430 mm Turning length (depending on equipment): 630 mm Headstocks: Standardized spindle nose for the use of various collets and chucks with appropriate adapters. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive via AC motor, power at 100% / 50% ED: 15 / 18.5 kW Maximum torque at 100% / 50% ED: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Spindle lock: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X-axis: 230 mm Radial resolution: 0.0005 mm Drive by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Drive by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes stepless: 0-5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Revolver Tool System: Number of tool stations: 12 Number of live tool stations: 6 Drive by AC motor, intermittent service power: 3.7 kW Max. intermittent torque: 36 Nm Max. drive speed: 5000 rpm Standard tool holder mounting: VDI 30 Max. tool shank size: 20 x 20 mm Integrated coolant system Bidirectional indexing Coolant System: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Crjdpszb U Epofx Apdjf Inventory 2230043 includes: 1 Fanuc 18i control unit 1 spindle headstock A2-6 1 12-position VDI 30 turret for 6 live tools 1 pneumatically operated tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6” 3-jaw chuck 1 live center Brucker CM5 1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut ref 4100.00552 1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut ref 4100.00550 1 KENNAMETAL ESX-25, without EX nut 1 EWS ESX-25, without EX nut 4 left radial tool holders, short, Form B2 ref 4100.0100 1 ESX-25 collet chuck, Form E3, with EX25 nut and 5 mm collet 1 ditto, without EX25 nut 3 tapping collets, Ø 4.5 – 6 and 8 mm 1 tool holder for indexable drills, Ø 40 mm bore, Form E1, ref 4100.00124 1 ditto, Ø 32 mm bore, ref 4100.00107 1 ditto, Ø 20 mm bore, ref 4100.00105 1 boring bar holder, Ø 8 mm, Form E2, ref 4100.00108 1 ditto, Ø 10 mm, ref 4100.0109 1 ditto, Ø 12 mm, ref 4100.0110 2 ditto, Ø 16 mm, ref 4100.0111 1 ditto, Ø 20 mm, ref 4100.0112 1 ditto, Ø 25 mm, ref 4100.0113 1 ditto, Ø 32 mm, ref 4100.0115 1 ditto, Ø 32 mm, GARANT long 5 steel protective plugs, Form Z2, ref 4100.00130 1 left axial tool holder, C4 force, ref 4100.00103 1 pneumatically controlled tailstock support CM5, ref 180-65.200 1 stand for microscope only, ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged steady rest for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.-- + VAT Subject to errors or omissions, the technical specifications are provided without commitment.

Tilstand: verkstedoverhalt (brukt), Byggeår: 2010, driftstimer: 31 600 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 3078, Travel axes Z = 400 mm Y = 200 mm X = 410 mm Power / Thrust Force Z-Y: 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X: 4.8 kW / >550 daN Rapid traverse X-Y-Z: 40 m/min (linear motor option = 50 m/min) Acceleration X-Y-Z-W: 8 m/s² / 0.8 g (linear motor option = 10.4 m/s² / 1.1 g) Resolution X-Y-Z-W: 0.0001 mm MAIN SPINDLE + C1 Power: 7.5 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm Credpfxoyf Angs Apdjf Turning spindle speed: 72,000°/min Clamping force for turning: 4,900 N at 6 bar B AXIS (TOOL SPINDLE TILT AXIS) Power: 4.3 kW Torque / peak: 119 / 226 Nm Angular range: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Support torque: 200 Nm TOOL SPINDLE Power: 5 kW Torque: 6 to 800 min-1 Max speed: 30,000 min-1 Collet clamping force: 2,000 N Locking torque: mechanical lock, straight-toothed Tool holder taper: HSK 40 (A or E) Tool clamping force: 1,000 daN TOOL CHANGER Number of stations: 30 (for HSK 40) CNC control: Fanuc 30i/31i type Y AXIS (CROSS SLIDE) Travel: 200 mm Power: 4.8 kW Feed force: 240 daN Resolution: 0.0001 mm Max rapid (G0): 50 m/min Max feed (G1): 20 m/min Measuring system: glass scale Z AXIS (LONGITUDINAL) Travel: 400 mm Power: 7.2 kW Feed force: 360 daN Resolution: 0.0001 mm Max rapid (G0): 50 m/min Max feed (G1): 20 m/min Measuring system: glass scale Includes 8 kW cooling unit and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14'' screen OPTION: LINEAR MOTOR FEED DRIVES for Y and Z axes TURNING-MILLING FUNCTION With integration of an index system (8 positions) on the tool spindle, conversion of the tool magazine for HSK40-A tool holders, increase of spindle speed to 5,500 min-1 "PRM" WORKPIECE SECOND OPERATION UNIT, 4 POSITIONS, FOR 6TH-SIDE MACHINING: When inactive, the unit is protected under the main spindle C1. The second operation unit moves on the W axis, parallel to the C axis. Max W-axis speed: 40 m/min. W-axis travel: 310 mm. With 2 vices – 3,500 N clamping force at 5 bar 1 tailstock SPINDLE BORE ENLARGEMENT Increase from 1 to 50 mm (main spindle) "RENISHAW" T27 TOOL MEASUREMENT DEVICE Lathe tool length measurement. Routine detection via M-code. Automatic tool breakage detection. TOOL MAGAZINE EXPANSION Increase in tool capacity from 30 to 60 stations THROUGH-SPINDLE COOLANT 100 bar, 25 L/min, 400 L tank HP THROUGH SPINDLE ADAPTATION AND PREPARATION FOR MILLING SPINDLE Mechanical and electrical integration of turning clutch PARTS UNLOADING CONVEYOR Outlet to the left side of the machine PAPER BAND FILTRATION SYSTEM COLLET CLAMPING SYSTEM FOR F-48 ADAPTATION FOR W-20 COLLETS PREPARATION FOR INTEGRATED BAR FEEDER All technical data provided without guarantee, except in case of error or omission.

Tilstand: god (brukt), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang, BC-40 CA – used - : Price ex location: only €5,950 (net)! Manufacturer: Bang & Co Model: BC-40 CA Year of manufacture: Credpfx Asy Ru Nuepdef The BC-40 CA is a fully automatic, horizontal stretch wrapper for bundling and spiral wrapping products that are to be fixed on a corrugated cardboard blank. After activation of the foot switch, the machine automatically centers the blank placed on the infeed conveyor and feeds it to the rotating ring. The size of the blank is automatically detected and assigned to one of ten adjustable wrapping programs. The feed and rotating ring speeds are adjustable and controlled via frequency converters. The product is fully automatically fixed onto the blank by the machine, and a clamping and cutting system applies and cuts off the film at the start and end of the wrapping cycle. The machine features a quick-change system for film roll replacement. Max roll diameter: 150 mm Film width: 70-125 mm Roll core diameter: 38 mm Film thickness: 15-35 µ Ring rotation speed: 30-140 rpm Power supply: 220/240 V – 50/60 Hz 1 PH Machine weight: 320 kg Machine start: foot switch Length of infeed and outfeed conveyors: 1500 / 500 mm Compressed air consumption NL/min: 0.75 l/m³ Compressed air: 6 BAR Compressed air consumption per cycle: 0.15 Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony