Kjøp brukt Automatica Rotasjonsmater Rotasjonsanlegg (436)

Tilstand: god (brukt), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang, BC-40 CA – used - : Price ex location: only €5,950 (net)! Bsdpfsy Ru Nuex Airswr Manufacturer: Bang & Co Model: BC-40 CA Year of manufacture: The BC-40 CA is a fully automatic, horizontal stretch wrapper for bundling and spiral wrapping products that are to be fixed on a corrugated cardboard blank. After activation of the foot switch, the machine automatically centers the blank placed on the infeed conveyor and feeds it to the rotating ring. The size of the blank is automatically detected and assigned to one of ten adjustable wrapping programs. The feed and rotating ring speeds are adjustable and controlled via frequency converters. The product is fully automatically fixed onto the blank by the machine, and a clamping and cutting system applies and cuts off the film at the start and end of the wrapping cycle. The machine features a quick-change system for film roll replacement. Max roll diameter: 150 mm Film width: 70-125 mm Roll core diameter: 38 mm Film thickness: 15-35 µ Ring rotation speed: 30-140 rpm Power supply: 220/240 V – 50/60 Hz 1 PH Machine weight: 320 kg Machine start: foot switch Length of infeed and outfeed conveyors: 1500 / 500 mm Compressed air consumption NL/min: 0.75 l/m³ Compressed air: 6 BAR Compressed air consumption per cycle: 0.15 Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Tilstand: ny, Byggeår: 2025, Powder Coating System for Large Components All dimensions and further modifications can be considered during the design and planning phase. The offer includes the following components: - Cabin for chemical pre-treatment (3 zones) with spray ring - Walk-in coating booth - Powder spray gun - Powder curing oven - Manual conveyor system - Electrical control unit Example: (all sizes can be individually modified) Space requirement: 30 x 15 meters Maximum workpiece size: L = 6,200mm W = 2,300mm H = 2,000mm Walk-in cleaning cabin incl. automatic spray ring 1. Cabin dimensions Length 9,000 mm Width 4,500 mm Height 3,400 mm 2. Tank dimensions Length 1,200 mm Width 850 mm Height 1,000 mm 3. Overall dimensions of the cabin incl. tanks Length 9,140 mm Width 5,580 mm Height 4,200 mm Walk-in coating booth, manual coating 1. Cabin dimensions Length 9,000 mm Width 4,500 mm Height 3,400 mm 2. Cabin dimensions incl. extraction system Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing oven 1. Internal dimensions length 6,500 mm 2. Internal dimensions width 2,500 mm 3. Internal dimensions height 2,950 mm 4. External dimensions incl. thermal block Length 7,600 mm Width 2,800 mm Height 3,100 mm Bodobhh Awspfx Airowr Manual Conveyor System The conveyor system consists of: 1. Support structure made of steel elements, 120x120mm / IPE 160 2. Trolley assemblies – No. 9862 GL, 4 units 3. Pneumatic accessories for locking/releasing during transfer operations 4. Rail system – No. 9060 – 234 meters 5. Trolley assemblies – No. 9862 GLHT, 24 units 6. Connecting elements – No. 9061M, 34 units 7. Clamping brackets – No. 9067/180, 234 units 8. Stoppers – No. 9169, 21 units 9. Movable locks – No. 9601 VM, 6 units 10. Fixed locks – No. 9601 VF, 17 units Electrical Control Unit The electrical control unit is divided into manual and automatic controls. It enables full control of all above-mentioned subsystems and consists of: - PLC - 5" color touch screen - easy view - - Modem - Thermal magnetic switch, fuses (Telemechanique, Siemens, ABB) - Cables, brackets, conduits, etc.

Tilstand: god (brukt), Byggeår: 2008, Uten vending PQC-S: Kontroll- og styringsteknologi PDCS II: Spektral måle- og reguleringsteknikk KMS 4 - Komori overvåkingssystem KHS-AL: Management + register Skeleton transfer sylindere Komorimatic fuktesystem FAPC: Helautomatisk plateveksler AMR (Automatic-Make-Ready) Bsdsy Hw A Njpfx Airswr Automatisk trykksylinder vaskesystem Automatisk fargevalsevaskesystem Automatisk gummidukvaskesystem Technotrans Beta C. Combi fargeverkstemperering Kammer-rakel lakk-system med anilox rastervalse Baldwin Graphiset GS4 IR-tørker Grafix Megatronic-S: Pulverenhet Pulveravsug Grafix Non-stop utlegger Vannkjølte enheter Automatisk formatinnstilling Forlenget utlegger (2000 mm) Trykkstellerstand: 150

Tilstand: god (brukt), Byggeår: 2006, Skjelettoverføringssylindere Komorimatic fukteenhet PDCS II: Spektral måle- og reguleringsteknologi KMS 4 - Komori overvåkningssystem PQC-S: Kontroll- og styringsteknologi KHS -AL: Ledelse og register AMR (Automatic Make-Ready) FAPC: Helautomatisk platedeksel IR-tørker + varmlufttørker Kamrakes lakkersystem med anilox rastervalse Sylinder vaskesystem Gummiduk vaskesystem Fargevalsevaskesystem Grafix pudderverk Bwedpfxoy Hwyue Airsr Hevet konstruksjon Automatisk formatinnstilling Technotrans Alpha C. kjøling Fargeverkstemperering (vannkjølt) Vannkjølte enheter Forlengelse av utlegger Tellerstand: 160 millioner.

Tilstand: klar til bruk (brukt), Byggeår: 2001, To identiske Volvo L180D hjullastere er tilgjengelige. Driftstimer: ca. 30 000 t, Vekt: 32,7 t, Motortype: Volvo TD 122 KHE, Nominelt turtall: 2100/min, Effekt SAE J1995 (brutto): 209 kW (284 hk), Effekt ISO 9249/SAE J1349 (netto): 206 kW (280 hk), Maksimalt dreiemoment ved 900/min, Dreiemoment SAE J1995 (brutto): 1580 Nm, Dreiemoment ISO 9249/SAE J1349 (netto): 1580 Nm, Slagvolum: 12 l, Driftsspenning: 24 V, Batterier: 2x 12 V, Batterikapasitet: 2x 140 Ah, Startstrøm per batteri: 1050 A, Reservekapasitet per batteri: 290 min, Dynamo: 1680 W/60 A, Startereffekt: 6,6 kW (9 hk), Driftsvekt: 26–29 t. Utstyr: Motor: Høyeffektiv dieselmotor med lave utslipp, 6-sylindret rekkemotor, direkteinnsprøytning, turbolader, ladeluftkjøler, 4-takt, utskiftbare sylinderforinger. Luftfiltreringssystem: trinnvis tredelt. Kjølesystem: hydrostatisk drevet vifte med separat kjølekrets for ladeluftkjøler. Dreiemomentomformer: en-trinns. Gir: Volvo HT 220 automatisk powershift-girkasse med mellomaksel og enhåndsbetjening. Girskiftesystem: Volvo Automatic Power Shift Generation II (APS II) med kjøremodusvelger. Aksler: Volvo-aksler med fullflytende aksling og planetnavreduksjon, akselhode i støpejern, stiv foraksel, pendelende bakaksel, 100 % differensialsperre foran. Girtype: Volvo HT 220, Dreiemomentmultiplikator: 2,27:1. Bremsesystem: Våt-skivebremser, helt innkapslet, oljekjølt, montert utvendig på akslene. Befaring på stedet er mulig. Bwedezadmaepfx Airjr

Tilstand: ny, Bending diameter – max. 36.0 mm ST Cutting thickness max. 36.0 mm ST Motor 1450 rpm Oil capacity 32.0 l Motor 380 Volt 50 Hz Total power requirement 5.5 kW Weight 650 kg Dimensions L-W-H 1470 x 1200 x 1020 mm Exhibition machine – NEW (!!) Features: - Maximum performance, minimal consumption - Hydraulic combination machine for bending and cutting operations * Suitable for e.g. construction steel or solid material - Bending mode with 3 different angle settings - Manual and automatic mode selectable - Simultaneous bending and cutting possible during operation - “ECO Mode” = Hydraulic pump only runs when foot switch is engaged - Movable foot switch - User manual Technical data: - Steel 45 kg / mm² … Bending Ø 36.0 mm / Cutting Ø 36.0 mm Bodpfx Aioxabnterewr * for 2x bars – Steel 45 kg / mm² … Bending Ø 20.0 mm / Cutting Ø 24.0 mm - Steel 65 kg / mm² … Bending Ø 32.0 mm / Cutting Ø 32.0 mm * for 2x bars – Steel 65 kg / mm² … Bending Ø 18.0 mm / Cutting Ø 20.0 mm - Steel 85 kg / mm² … Bending Ø 26.0 mm / Cutting Ø 28.0 mm * for 2x bars – Steel 85 kg / mm² … Bending Ø 14.0 mm / Cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Tilstand: brukt, Byggeår: 1999, Diameter 3 - 16 mm Bodpfxjtqqp Ij Airjwr Length 3000 mm = automatic bar loading magazine For bar diameters of 3 - 16 mm, bar length 3000 mm, capacity e.g. 23 bars of 8 mm diameter each

Tilstand: svært god (brukt), Byggeår: 2017, Funksjonalitet: fullt funksjonell, Stiller STA 1500 – Full-automatic Can Sealing Machine (incl. Markem-Imaje 9450 Printer) The Stiller STA 1500 is the ideal stand-alone solution for companies wishing to seal small to medium batches efficiently, reliably, and fully automatically. As a complete system, this unit features an integrated outfeed conveyor equipped with a perfectly coordinated Markem-Imaje type 9450 continuous inkjet printer. This enables your cans to be sealed with precision and simultaneously marked in accordance with standards (e.g., with best-before date or batch number) in a single operation. The machine impresses with its robust stainless steel construction, extremely user-friendly Siemens PLC controller, and quick, tool-free format changes thanks to automatic height adjustment. Technical data & features: Capacity: up to approx. 1,500 cans/hour Marking system: Integrated Continuous Inkjet Printer Markem-Imaje 9450 (optimized for high-contrast, smudge-proof printing on tinplate, aluminum, or composite cans; easy code management via touchscreen) Bsdpey Uxgfsfx Airswr Operating range, diameter: Ø 52 mm to 99 mm (other diameters available on request) Operating range, height: 30 mm to 200 mm (automatic height adjustment for up to 30 mm without machine conversion) Controller: Siemens PLC with text display for operating states and error messages Drive / connection: 0.95 kW, 3 x 400 VAC, 50 Hz Construction: Enclosure and control cabinet made completely of stainless steel; mobile on 4 swivel castors with parking brake Dimensions (LxWxH): approx. 200 x 80 x 180 cm (working height: 100 cm) Weight: approx. 380 kg

Tilstand: klar til bruk (brukt), Byggeår: 1991, vandring X-akse: 1 500 mm, vandring Y-aksen: 700 mm, bevegelsesavstand Z-akse: 550 mm, spindelhastighet (maks.): 2 066 o/min, totalvekt: 4 000 kg, Heidenhain 3-axis DRO feed drives Bwodpfx Aiowqcv Nsrer automatic lubrication external electrical cabinet table 2000x460 mm travels 1500x700x550 mm weight 4000 kg

Tilstand: som ny (utstillingsmaskin), Byggeår: 2023, Funksjonalitet: fullt funksjonell, slipelengde: 800 mm, slipbredde: 400 mm, total høyde: 1 850 mm, total lengde: 1 960 mm, total bredde: 1 480 mm, matelengde X-akse: 800 mm, matinglengde Y-akse: 415 mm, emnevekt (maks.): 500 kg, mating Z-akse: 360 m/min, slipeskivens diameter: 350 mm, avstand fra bord til spindelsenter: 520 mm, bordlengde: 800 mm, bordbelastning: 500 kg, type innstrømsstrøm: trefaset, bordbredde: 400 mm, slipeskivebredde: 30 mm, spindelhastighet (maks.): 2 800 o/min, totalvekt: 1 800 kg, slipespindelmotoreffekt: 4 W, FLAT SURFACE GRINDER SP-4080AHR Bedpfxey Sgdgj Airswr • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • 2-axis digital readout • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross slides are hardened and ground • Longitudinal guideway: flat type; cross guideway: V-type • Electromagnetic worktable • Balancing arbor • Grinding wheel flange • Operable by persons with disabilities • Grinding wheel with arbor • Wheel dresser • Cooling system • Central lubrication system • Work light • Set of basic adjustment tools • Worktable guard • Leveling screws and pads • User manual in Polish • CE conformity declaration Table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance spindle axis to table mm 520 Longitudinal table feed mm/min 3-20 Table feed • Automatic mm/min 0-8 • Rapid traverse mm/min 600 • Manual / per graduation mm/grad 0.01 • Manual / per revolution mm/rev 2 Vertical headstock feed • Automatic mm/min none • Rapid traverse mm/min 360 • Manual / per graduation mm/grad 0.01 • Manual / per revolution mm/rev 2 Grinding wheel • Rotational speed rev/min 2800 • Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface roughness Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. table load kg 500 Dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Tilstand: ny, Byggeår: 2026, pressekraft: 15 t, C-press – 15 t – 300 × 300 mm For sale is a C-frame press from manufacturer DURENDUS with a maximum pressing force of 15 t. The machine features a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for pressing tasks, assembly operations, and small-batch production in industrial settings. Bedpfx Asy Twg Isirjwr ##### Technical Data & Information: ==== General Information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 t - Table size: 300 × 300 mm - Ram plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Ram plate guidance: double guided ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Approach speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Delivery rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure adjustment via touchscreen - Stroke adjustment via touchscreen - Hydraulic oil temperature monitoring - Fault indication via display - Remote service / remote maintenance possible - Operation: two-hand control ==== Safety - Light barrier - Two-hand control - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive power: 2.2 kW - Lighting: LED - Control cabinet protection class: IP 54 ##### Fields of application: pressing, assembly work, small-batch production, fixture construction, toolmaking, metalworking, fine assembly, testing operations, workshop applications (hydraulic press, hydraulic C-frame press, single-column press, 15 t press, 15 tonne press, assembly press, insertion press, small batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety standard NR 12, which builds upon these standards. Our key strengths are special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses primarily use components from leading European manufacturers.

Tilstand: ny, Byggeår: 2025, OMCN 100 Ton Electro-Hydraulic Press Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS Bwsdpfx Aofh R Nyoirjr AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press equipped with high-speed motor, pressure gauge, and double-speed hydraulic unit featuring vane pump for rapid approach and return, as well as axial piston pump for the working phase. Fitted with pressure relief valve and three-position control distributor (advance, neutral, return). The machine is supplied with oil. Equipped with a winch for lifting the worktable. The ram is made of special treated and chromed steel. The press is equipped with two-hand control and simultaneity system, in compliance with current safety regulations. Comes with protective rear and side panels. CE certified, including electromagnetic compatibility. Ram stroke: 310 mm Internal clearance: 1,010 mm

Tilstand: ny, Funksjonalitet: fullt funksjonell, Utstyr: belysning, Alzmetall AB 40 iTRONIC 70-4000 RPM Column Drilling Machine Condition: new Drilling capacity in steel E335 (ST 60): 50 mm Thread cutting capacity in steel E335 (ST 60): M 30 Spindle taper: MK 4 Spindle stroke: 160 mm Throat depth: 300 mm Column diameter: 145 mm Bwedpfx Aoy S Aryjirer Spindle speed range: 70 – 4,000 RPM Power: 1.8 / 2.9 kW Equipment: 7" TFT LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle guard Three separate buttons for clockwise – counterclockwise – stop Mushroom pushbutton Main switch Clockwise and counterclockwise rotation Control voltage 24 Volt Protection class IP 54 Motor insulation class "F" (155°) Paint finish Electromagnetic feed overload protection Initial machine oil fill Optional equipment: - Alzmetall Option No. 12 LED machine light - Alzmetall Option No. 20.4 Comfort grip control - Alzmetall Option No. 20.5 Foot switch - Alzmetall Option No. 24 Coolant system A - Alzmetall Option No. 37.3 Automatic drilling depth control - Alzmetall Option No. 37.5 Technology computer - Alzmetall Option No. 37.6 Maximum drilling depth display - Alzmetall Option No. 38.1 Automatic spindle stop - Alzmetall Option No. 38.2 Workpiece counter / spindle hour meter - Alzmetall Option No. 50.6 Fine drilling depth adjustment 0.1 mm

Tilstand: brukt, Byggeår: 1999, Nr. 3076 STEGHERR NFT Cross Mullion Grooving Machine Used, year of manufacture 1999 Special milling machine for cutting a groove on the top side of pre-milled glazing bars. Bwjdpeiyp D Dsfx Airsr Automatic operating sequence: The pre-milled glazing bar is placed against the stop and centered. By pressing the bar against the stop, the milling process is initiated. The milling unit moves upward and automatically returns to its starting position after milling. Milling motor: 400 V; 1.1 kW; 2.5 A Compressed air connection: 6 bar Machine ready to plug in. Including mobile base frame. All technical details provided without guarantee, according to manufacturer’s brochure. The sale is carried out by a private individual, no VAT can be shown. Collection in 73430 Aalen Transport dimensions approx. 600 x 400 x 1500 mm (LxWxH) Weight approx. 60 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. The sale is made in AS-IS condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner; no guarantee. Subject to prior sale. No warranty is provided for used machines. "Sold as seen" applies. Pictures and videos serve as examples and do not represent the actual scope of delivery. Terms of payment: Payment before collection or shipping. Delivery conditions: ex location.

Byggeår: 2021, Tilstand: svært god (brukt), Memmert ICH Climate Chamber 260L, year 2021. The unit comes with a one-year spare parts warranty. Bedpfx Aezam Hisirjwr Manufacturer’s description Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10°C to +60°C when humidity and/or lighting are activated Temperature setting accuracy 0.1°C Temperature sensor 2 x Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, with automatic takeover in case of failure Humidity Humidity Humidity supplied via distilled water from an external tank using a self-priming pump Humidification Humidification is performed by a hot steam generator Humidity control Active humidification and dehumidification of air adjustable in the range of 10-80% relative humidity with digital RH display – display resolution 0.1%, setting accuracy 0.5% Lighting Light Daylight and ultraviolet lighting can be individually programmed via controller Light Cold white light ±6%, for UV light ±10% Light Lighting unit consisting of 4 cold white fluorescent tubes (standard D65, 6500 K) and 2 UV lamps covering the wavelength range 320–400 nm

Tilstand: ny, Byggeår: 2026, driftstimer: 1 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: EY-R20K, totalvekt: 780 kg, drivstofftype: diesel, tankkapasitet: 130 l, farge: grønn, effekt: 18,02 kW (24,50 hk), utgangsstrøm: 29 A, utgangsspenning: 400 V, utgangsfrekvens: 50 Hz, type utgangsstrøm: trefaset, nominell effekt: 17,6 kW (23,93 hk), nominell (tilsynelatende) effekt: 22 kVA, kontinuerlig effekt: 16 kW (21,75 hk), kontinuerlig tilsynelatende effekt: 20 kVA, total lengde: 1 875 mm, total bredde: 880 mm, total høyde: 1 170 mm, rotasjonshastighet (maks.): 1 500 o/min, motordesigner: Kohler, type kjøling: vann, Energy Generator EY-R20K utleieversjon Den robuste Energy Generator EY-R20K er et kraftig Kohler 20 kVA dieselaggregat, nå til salgs hos Van Delft Staal. Den er spesielt utviklet for byggeplasser for å sikre en stabil strømforsyning ved ethvert strømbrudd. Takket være den moderne Kohler-dieselmotoren oppfyller denne generatoren kravene om minimalt utslipp og optimal drivstofføkonomi. EY-R20K er utstyrt med AVR-teknologi (Automatic Voltage Regulation), som sørger for jevn og stabil spenning – perfekt til drift av følsomt utstyr. Denne dieselgeneratoren opererer stillegående, effektivt og er bygget for langvarig driftssikkerhet, akkurat det du forventer fra Aggrgaat.store/Van Delft Staal, autorisert forhandler av ENERGY Pure Power. Fordeler oppsummert: Effekt: 20 kVA / 16 kW PRP Effekt: 22 kVA / 17,6 kW LTP Kraftig ytelse 1500 o/min AVR-system for stabil spenning ATS-forberedelse, kontakt og valgfri ATS-styrekasse Stillegående, økonomisk og enkel å vedlikeholde Perfekt aggregat ved strømbrudd eller til mobil strømforsyning Vi tilbyr også service og reparasjoner. Bedpfsy S Tkyex Airswr Alle generatorer klargjøres for oppstart og drift. På lager nå. Aggregaat.store/Van Delft Staal – din partner for pålitelig energi, når og hvor du trenger det.

Tilstand: nesten som ny (brukt), Byggeår: 2023, SCM Accord 40 fx CNC machining center with the following features: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx version PRO-SPEED OF0168 Pendulum operation capability OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO operator console with integrated PC 450291 Additional fixed operator panel 870068 TECPAD – remote control for machine functions 560058 No.10 MATIC support rails – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle drive "Prisma KT-KS" 470014 Air nozzle for tool 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 F16 drilling unit Bedpfx Aoyfgzdeirswr OF0176 Front stop row H50 for worktable with 10 support rails 510205 Clamping jaw preparation for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm – 36 pcs 480006 Suction cups H110 145x55 mm, rotatable – 10 pcs 480007 Suction cups H110 180x65 mm, rotatable – 10 pcs 480018 Suction cups H110 145x30 mm, rotatable – 5 pcs 480410 Lifting devices H110 – 8 pcs 350016 Vacuum pump 250 (300) m3/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy-saving system 210837 TR12 lateral tool magazine 210056 Rapid 24 rear-mounted tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface (HMI) software MAESTRO ACTIVE OF0543 Windows 10 embedded 64-bit operating system OF0422 Machine control interface software Maestro cnc OF0435 Hardware key for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL EXECUTION INCLUDED IN MACHINE CONFIGURATION: - Extension of max. panel width to 2,120 mm fully machinable. The traverse length remains unchanged at 1,900 mm. - 10 pcs support suction cups for offcuts MACHINE ALREADY DISMANTLED AND IN STORAGE. LIST PRICE 2023 EUR 399,890.--

Tilstand: svært god (brukt), Byggeår: 1999, H+K four-sided planer and thicknessing machine Quadroplan 180 Bsdpeydmawofx Airewr Planing width: 20–180 mm Planing height: 5–120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic floating head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed system Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction connection: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Idling outfeed roller Automatic central lubrication Automatic star-delta switching INCLUDES 4 reversible cutter heads INCLUDES operating manual & wiring diagram CE compliant All ball bearings NEW All V-belts NEW Note on used machinery: • Subject to errors in technical details and prior sale. • Stated prices are ex-site—free loading! • Machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Tilstand: brukt, Byggeår: 2020, Dreiediameter: 380 mm Turning length: 511 mm Control: Mazatrol SmoothG Turning diameter over slide: 276 mm Max. swing diameter over bed: 675 mm Standard machining diameter: 276 mm Bar capacity: 65 mm X-axis travel: 234 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 625 mm Rapid traverse Z-axis: 33 m/min Spindle speed: 35 - 5000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Power (40% duty cycle): 26 kW Rated power (100% continuous operation): 22 kW Max. torque: 465 Nm Rotational speed: 6000 rpm Main drive power: 11 kW Max. torque: 90 Nm Milling spindle speed (live tools): 35-6000 rpm Max. torque at milling spindle: 47 Nm Drive power – milling spindle: 5.5 kW (40% duty cycle) Milling spindle power (continuous operation): 3.7 kW Number of tool stations: 12 (driven) Tool cross-section (external): 25 sq mm Bodetugggjpfx Airowr Boring bar diameter: 40 mm Drill diameter: 20 mm Milling cutter diameter: 20 mm Tap diameter: M20x2.5 Indexing time per turret station: approx. 0.20 sec Coolant tank: 180 l Connected load: 46.2 kW Machine weight: approx. 5.9 t Space requirement: approx. 2.7 x 1.9 x 1.9 m Machine is in as-new condition Including the following accessories: - Signal light (3-color LED), rectangular - High-performance coolant system (1.1 kW) Max. flow rate 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle for main spindle - Preparation for oil mist extraction electr./mount 98mm - Preparation for bar feeder - Robot interface (Advance/Profibus) - Chip conveyor with low discharge height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preparation for use of a hollow clamping cylinder on sub spindle - Hollow clamping device incl. draw tube + cylinder - Pull chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Collet change device STANDARD ACCESSORIES Automatic on/off and warm-up function Air blow device at chuck on sub spindle Use of linear guides with carriages USB port (1 connection) Set of manuals in electronic form on CD C-axis main spindle, input accuracy 0.0001° Spindle positioning sub spindle without C-axis, input accuracy 0.001° 12-position VDI tool turret Operator door with interlock switch Double foot pedal for both main and sub spindle Hydraulic pressure interlock Fully enclosed work area, work area lighting Safety precautions according to global standard High-performance coolant system (520W), max. flow rate 11.5 l/min Complete coolant system Automatic opening/closing of chuck jaws Automatic tool setter Absolute positioning system Preparation for chip conveyor (side) Synchronization of main and sub spindle Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control, 19" LCD color screen (touch screen) User macro (600 variables), EIA/ISO input function Optional stop (selective halt) Tool path checking in background Thread cutting function (G33), polar coordinate input (EIA) Direct entry of drawing data LAN/SD memory card interface - Used machine, sold without warranty -

Tilstand: brukt, Byggeår: 2019, x-axis travel: 2,000 mm y-axis travel: 820 mm z-axis travel: 720 mm Control: Mazatrol Smooth G Spindle taper: SK 40 Spindle speeds: 35 - 12,000 rpm Spindle drive power: 22 kW Distance from spindle nose to table top: 140 - 860 mm Table load capacity: 1,700 kg Rapid traverses x/y/z: 50 m/min Table width: 820 mm Bwsdpetuggcofx Airer Table length: 2,500 mm Table height above floor: 870 mm T-slots: 7 T-slot width: 18 mm T-slot spacing: 100 mm Tool changer: 48 positions Tool change time: 4.7 sec Tool diameter with 2 adjacent vacant pockets: 130 mm Tool diameter with full tool magazine: 80 mm Max. tool weight: 8 kg Max. tool length: 350 mm Required air pressure: 5 - 9 bar Air consumption: 260 l/min Electrical specification – voltage/frequency: 400 V / 50 Hz Coolant tank capacity: 450 l High-performance coolant system: 25 bar Total power requirement: 46.7 kW Machine weight approx.: 14.8 t Space requirements approx.: 4.3 x 3.6 x 3.1 m STANDARD EQUIPMENT Adaptation for the European market USB port (1 port) Mazak standard color Spindle speed 12,000 rpm (steep taper 40) Work area lighting SAFETY FEATURES Operator door with interlock switch Work area enclosure Splash guard encloses the work area from the side. Fully enclosed work area Protection against chips, coolant, and access to the work area during automatic operations. Safety devices conform to global standards COOLANT SUPPLY Coolant supply through spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, piping, and nozzles for efficient production of quality components. FACTORY AUTOMATION Automatic on/off and warm-up function Automatic warm-up activation via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory-prepared for chip conveyor (left side) NUMERICAL CONTROL Fixed control/operating unit Relocation detector Mazatrol SmoothG control 19" LCD color monitor (touch screen) Mazak thread tapping/drilling cycle Tornado (Mazatrol) With boring and thread tapping in helical machining mode, a wide range of diameters can be machined at high speeds with just one tool. This function minimizes programming and machining times. EIA/ISO input function Background tool path verification The tool path of a program can be checked even if another program number is called and being executed in automatic mode. 3D coordinate transformation Form compensation for rotary axes Mazacc-2D software (contour compensation) Accuracy is maintained at high feed rates. Software package Mazacc-3D for high-speed machining High-speed, high-precision machining for contours defined at very fine program increments. MAZACC-3D high-speed software package (NO456) is required additionally. High smoothing control LAN interface SD memory card I/F Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece form compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Form compensation for rotary axes - NO497 D) High-precision control for finishing operations - Seamless corner control - ...

Tilstand: klar til bruk (brukt), Byggeår: 2021, Funksjonalitet: fullt funksjonell, total høyde: 2 200 mm, total lengde: 1 700 mm, total bredde: 1 100 mm, rotasjonshastighet (maks.): 2 650 o/min, effekt: 1,6 kW (2,18 hk), vanntankkapasitet: 100 l, ROSLER RZ 150 A Cleaning System – Automatic Sludge Removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This industrial-grade, fully automated system is equipped with state-of-the-art solutions that improve efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminium alloy • Steel housing Equipment and features: • Smooth start and stop via frequency inverter • Adjustable sludge removal speed • Automatic retraction of cleaning blade • Automatic residual water removal • Electronic vibration control • Automatic rotor rinsing • Special bearing lubrication system to extend device lifespan Central control unit E61-400: • Controls and monitors the cleaning system operation • E61-400 type control unit Bwedpfxezca Apj Airer • SIEMENS S7-1200 controller • Ensures fully automatic and stable system operation Sludge removal time adjustable between 2 and 5 minutes, depending on consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for water delivery to the centrifuge • Pump operation cycle control • Water level monitoring in the tank The set also includes a P 100 SB-P9 buffer tank for dirty water residue from the centrifuge. This tank is required when the centrifuge is located further from the dirty water source. Buffer tank P 100 SB-P9: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor rinse water to the buffer tank • Made from durable HDPE polyethylene (black color) • Slanted, 3-sided funnel-shaped bottom • P9 diaphragm pump – 4 bar operating pressure • Water level monitoring RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Transport and emptying possible using a forklift • Made of steel • Discharge opening with drain plug • Equipped with tilting mechanism The unit is robust, efficient, and ready for operation.

Tilstand: brukt, Byggeår: 1965, Bore capacity in steel (diameter): 45 mm Reach: 325 / 1000 mm Workpiece height – max.: approx. 1000 mm Spindle taper: MT 4 Spindle speeds: 40 – 1700 rpm Feeds: 0.125 – 1.25 mm/rev Distance spindle/base plate: 385 / 1400 mm Quill stroke: 325 mm Vertical arm adjustment: 700 mm Bwsdpfx Aevh Nb Ieirsr Arm swiveling: 360° Drilling carriage horizontal travel: 675 mm Clamping surface of base plate: 1300 x 800 mm Total power requirement: 6.2 kW Machine weight: approx. 3.8 t Machine dimensions (L x W x H): 2.30 x 0.98 x 2.82 m - Automatic feed - Spindle forward/reverse Accessories: Cube table 1000 x 750 x 500 mm, hydraulic machine vice on rotary plate, jaw width 200 mm; coolant system

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, BMB Coating System for PCBs, Model TUA-200 / 2 in EXCELLENT CONDITION. Purchased: 2023 (like-new condition) and only operated for 6 months. Bodpfx Ajv I Tb Eoirjwr Version: Professional (comprehensive premium features) - High Speed Coating up to 4x faster - 3 coating methods in one system - Suitable for components up to 1200x570mm - Permanent viscosity and temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with coating - (Digital work documentation system, pending) - Large lacquer tank volume for tall components - Lacquer consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM System (equipment pending confirmation), you can track at any time which component was produced when, where, by whom, and how. Compliance with ISO/TS 16949 requirements is ensured. When setting up a tool, the PDM system automatically recognizes all necessary coating parameters. Work instructions, videos, technical data sheets, processing guidelines, etc. – everything at your fingertips! 19″ swiveling Smart Touch Panel Viscosity control Tool monitoring: Automatic detection and adjustment Machine height electrically adjustable Coating processes: - Dip Coating (DipCoat) - Selective-Contact-Coating SCC® - Selective-Transfer-Coating STC® The system can be shipped by carrier upon agreement. #8300

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2003, AUTOMATISK KAPPESAG FOR LEGERINGER, brukt, IMET VELOX 350 AF-E. FULLSTENDIG OVERHALT Bwodpfxezh Ugfe Airor

Tilstand: brukt, maskin-/kjøretøynummer: 2801-0234, x-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Speed range: 31 - 3150 rpm Feed rate: 1 - 3600 mm/min Rapid traverse: 4000 mm/min Spindle mount: SK 40 Head swivels: +/- 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Space requirements approx.: 1.3 x 1.1 x 1.6 m Bwsdjcxxm Espfx Airer CNC-controlled universal milling machine with Dialog 4 control, vertical head swiveling +/- 90° with 60 mm quill stroke, horizontal spindle, power feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, enclosed chip guard with chip tray, separate control cabinet. The machine is in good condition.