Presisjonsdreiebenk

Schaublin 180-CCN R-TM

TECHNICAL SPECIFICATIONS

Capacities:
Maximum turning diameter: 270 mm
Maximum diameter permitted above carriage: 160 mm
Center height above carriage: 83 mm
Maximum diameter above bed: 430 mm
Turning length (depending on equipment): 630 mm

Headstocks:
Standardized spindle nose for the use of various collets and chucks with appropriate adapters.
Accessories for SCHAUBLIN collets: B45/F66
Maximum bar capacity, diameter: 36 mm / 60 mm
Automatic chuck, standard diameter: 210 mm
Direct drive via AC motor, power at 100% / 50% ED: 15 / 18.5 kW
Maximum torque at 100% / 50% ED: 135 / 165 Nm
Maximum spindle speed: 4000 rpm
Spindle positioning, increment: 0.1°

C-Axis:
Programmable increment: 0.001°
Spindle lock: 80 Nm
Pneumatic clamping cylinder: 3400 daN

Cross Slide:
Transverse travel, X-axis: 230 mm
Radial resolution: 0.0005 mm
Drive by AC motor, nominal torque: 3 Nm
Ball screw, diameter x pitch: 32 x 5 mm
Longitudinal travel, Z-axis: 720 mm
Resolution: 0.001 mm
Drive by AC motor, nominal torque: 6 Nm
Ball screw, diameter x pitch: 32 x 10 mm

Feeds:
Working feed, X/Z axes stepless: 0-5000 mm/min
Rapid traverse, X/Z axes: 8 / 10 m/min
Feed force, X/Z axes: 420 / 670 daN

Revolver Tool System:
Number of tool stations: 12
Number of live tool stations: 6
Drive by AC motor, intermittent service power: 3.7 kW
Max. intermittent torque: 36 Nm
Max. drive speed: 5000 rpm
Standard tool holder mounting: VDI 30
Max. tool shank size: 20 x 20 mm
Integrated coolant system
Bidirectional indexing

Coolant System:
Tank capacity: 120 liters
Pump flow rate: 10 l/min
Pressure: 5 bar

Inventory 2230043 includes:

1 Fanuc 18i control unit
1 spindle headstock A2-6
1 12-position VDI 30 turret for 6 live tools
1 pneumatically operated tailstock support 180-65.200
1 SCHUNK Rota-s 200-52 A2-6” 3-jaw chuck
1 live center Brucker CM5
1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut ref 4100.00552
1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut ref 4100.00550
1 KENNAMETAL ESX-25, without EX nut
1 EWS ESX-25, without EX nut
4 left radial tool holders, short, Form B2 ref 4100.0100
1 ESX-25 collet chuck, Form E3, with EX25 nut and 5 mm collet
1 ditto, without EX25 nut
3 tapping collets, Ø 4.5 – 6 and 8 mm
1 tool holder for indexable drills, Ø 40 mm bore, Form E1, ref 4100.00124
1 ditto, Ø 32 mm bore, ref 4100.00107
1 ditto, Ø 20 mm bore, ref 4100.00105
1 boring bar holder, Ø 8 mm, Form E2, ref 4100.00108
1 ditto, Ø 10 mm, ref 4100.0109
1 ditto, Ø 12 mm, ref 4100.0110
2 ditto, Ø 16 mm, ref 4100.0111
1 ditto, Ø 20 mm, ref 4100.0112
1 ditto, Ø 25 mm, ref 4100.0113
1 ditto, Ø 32 mm, ref 4100.0115
1 ditto, Ø 32 mm, GARANT long
5 steel protective plugs, Form Z2, ref 4100.00130
1 left axial tool holder, C4 force, ref 4100.00103
1 pneumatically controlled tailstock support CM5, ref 180-65.200
1 stand for microscope only, ref 180-60.005
1 coolant system

OPTION

1 3-jaw hinged steady rest for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.-- + VAT

Subject to errors or omissions, the technical specifications are provided without commitment.
Gedpfx Amezb U Epeijbr

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.