Kjøp brukt Automatica Dvpgp (513)

Tilstand: brukt, Universal Tool Milling Machine MAHO Type MH 800 P with Digital Readout and Path Control HEIDENHAIN TNC 121 - Serial no. 80983 | Year of manufacture: 1982 - The machine was overhauled by MMD in 2008, and since then only rarely used in the workshop of an electronics company. Travel: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed rate X, Z axes: 10–500 mm/min, stepless Feed rate Y axis: 5–250 mm/min, stepless Rapid traverse X, Z axes: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Connected load: 380 Volt, 50 Hz, 10 kW Equipment: - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping Pgjdpfev Amryox Aqtsn - Coolant system integrated in the machine base - Universal built-in rotary table, 360° rotatable, 30° tiltable and inclinable, 225 mm transverse adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via dividing disc 1:120 = 1 revolution = 3° - Swivelling control panel - Central lubrication - Operating manual - Machine mounted on a steel plate (L x W x H): 1400 x 1000 x 50 mm = 550 kg Required space (L x W x H): 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Weight (total, measured): 4250 kg Very good condition

Tilstand: verkstedoverhalt (brukt), Byggeår: 2000, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter permitted above carriage: 160 mm Center height above carriage: 83 mm Maximum diameter above bed: 430 mm Turning length (depending on equipment): 630 mm Headstocks: Standardized spindle nose for the use of various collets and chucks with appropriate adapters. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive via AC motor, power at 100% / 50% ED: 15 / 18.5 kW Maximum torque at 100% / 50% ED: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Spindle lock: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X-axis: 230 mm Radial resolution: 0.0005 mm Drive by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Drive by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes stepless: 0-5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Revolver Tool System: Number of tool stations: 12 Number of live tool stations: 6 Drive by AC motor, intermittent service power: 3.7 kW Max. intermittent torque: 36 Nm Max. drive speed: 5000 rpm Standard tool holder mounting: VDI 30 Max. tool shank size: 20 x 20 mm Integrated coolant system Bidirectional indexing Coolant System: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control unit 1 spindle headstock A2-6 1 12-position VDI 30 turret for 6 live tools 1 pneumatically operated tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6” 3-jaw chuck 1 live center Brucker CM5 1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut ref 4100.00552 1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut ref 4100.00550 1 KENNAMETAL ESX-25, without EX nut 1 EWS ESX-25, without EX nut 4 left radial tool holders, short, Form B2 ref 4100.0100 1 ESX-25 collet chuck, Form E3, with EX25 nut and 5 mm collet 1 ditto, without EX25 nut 3 tapping collets, Ø 4.5 – 6 and 8 mm Pgedpfx Aqszb U Epetjn 1 tool holder for indexable drills, Ø 40 mm bore, Form E1, ref 4100.00124 1 ditto, Ø 32 mm bore, ref 4100.00107 1 ditto, Ø 20 mm bore, ref 4100.00105 1 boring bar holder, Ø 8 mm, Form E2, ref 4100.00108 1 ditto, Ø 10 mm, ref 4100.0109 1 ditto, Ø 12 mm, ref 4100.0110 2 ditto, Ø 16 mm, ref 4100.0111 1 ditto, Ø 20 mm, ref 4100.0112 1 ditto, Ø 25 mm, ref 4100.0113 1 ditto, Ø 32 mm, ref 4100.0115 1 ditto, Ø 32 mm, GARANT long 5 steel protective plugs, Form Z2, ref 4100.00130 1 left axial tool holder, C4 force, ref 4100.00103 1 pneumatically controlled tailstock support CM5, ref 180-65.200 1 stand for microscope only, ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged steady rest for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.-- + VAT Subject to errors or omissions, the technical specifications are provided without commitment.

Tilstand: verkstedoverhalt (brukt), Byggeår: 2010, driftstimer: 31 600 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 3078, Travel axes Z = 400 mm Y = 200 mm X = 410 mm Power / Thrust Force Z-Y: 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X: 4.8 kW / >550 daN Rapid traverse X-Y-Z: 40 m/min (linear motor option = 50 m/min) Acceleration X-Y-Z-W: 8 m/s² / 0.8 g (linear motor option = 10.4 m/s² / 1.1 g) Resolution X-Y-Z-W: 0.0001 mm MAIN SPINDLE + C1 Power: 7.5 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm Turning spindle speed: 72,000°/min Clamping force for turning: 4,900 N at 6 bar B AXIS (TOOL SPINDLE TILT AXIS) Power: 4.3 kW Torque / peak: 119 / 226 Nm Angular range: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Support torque: 200 Nm TOOL SPINDLE Power: 5 kW Torque: 6 to 800 min-1 Max speed: 30,000 min-1 Collet clamping force: 2,000 N Locking torque: mechanical lock, straight-toothed Tool holder taper: HSK 40 (A or E) Tool clamping force: 1,000 daN TOOL CHANGER Number of stations: 30 (for HSK 40) CNC control: Fanuc 30i/31i type Y AXIS (CROSS SLIDE) Travel: 200 mm Power: 4.8 kW Feed force: 240 daN Resolution: 0.0001 mm Max rapid (G0): 50 m/min Max feed (G1): 20 m/min Measuring system: glass scale Z AXIS (LONGITUDINAL) Travel: 400 mm Power: 7.2 kW Feed force: 360 daN Resolution: 0.0001 mm Max rapid (G0): 50 m/min Max feed (G1): 20 m/min Measuring system: glass scale Includes 8 kW cooling unit and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14'' screen OPTION: LINEAR MOTOR FEED DRIVES for Y and Z axes TURNING-MILLING FUNCTION With integration of an index system (8 positions) on the tool spindle, conversion of the tool magazine for HSK40-A tool holders, increase of spindle speed to 5,500 min-1 "PRM" WORKPIECE SECOND OPERATION UNIT, 4 POSITIONS, FOR 6TH-SIDE MACHINING: When inactive, the unit is protected under the main spindle C1. The second operation unit moves on the W axis, parallel to the C axis. Max W-axis speed: 40 m/min. W-axis travel: 310 mm. With 2 vices – 3,500 N clamping force at 5 bar 1 tailstock SPINDLE BORE ENLARGEMENT Increase from 1 to 50 mm (main spindle) "RENISHAW" T27 TOOL MEASUREMENT DEVICE Lathe tool length measurement. Routine detection via M-code. Automatic tool breakage detection. TOOL MAGAZINE EXPANSION Increase in tool capacity from 30 to 60 stations THROUGH-SPINDLE COOLANT 100 bar, 25 L/min, 400 L tank HP THROUGH SPINDLE ADAPTATION AND PREPARATION FOR MILLING SPINDLE Mechanical and electrical integration of turning clutch PARTS UNLOADING CONVEYOR Outlet to the left side of the machine Pgjdpfxsyf Ango Aqtsn PAPER BAND FILTRATION SYSTEM COLLET CLAMPING SYSTEM FOR F-48 ADAPTATION FOR W-20 COLLETS PREPARATION FOR INTEGRATED BAR FEEDER All technical data provided without guarantee, except in case of error or omission.

Tilstand: brukt, Byggeår: 2012, Nr. 3268 Schirmer BAZ 1000-G6 / VU “Basic” Cutting and Processing Centre Used, Year of manufacture: 2012 Comprising: - Schirmer BAZ 1000-G6 / VU “Basic” cutting and processing centre - Schirmer SZA 450 automatic steel cutting unit - Schirmer buffer screw-in station - Schirmer SBZ I bar processing centre Schirmer BAZ 1000-G6 / VU “Basic” Cutting and Processing Centre: - Cutting length: 300 – 3,900 mm - Automatic feed magazine for 9 profiles, maximum length 6,500 mm - Automatic transfer station - Feed unit for PVC profiles up to 6,500 mm in length, with NC-positioned gripper, positioning speed up to 150 m/min - Profile length measuring device including optimisation software - Automatically adjustable profile guides - Processing station designed as G-Module “Ultra Speed” Processing operations on PVC profiles: - Drainage and ventilation slots/bores in sash, frame and transom profiles, handle drilling for entrance doors, striker marking, mortise pocket milling for lock cases - Height measuring unit for detection of profile tolerances - Gasket cutting device - VU saw unit with twin saw assemblies, 2 x 45° - Standard saw unit with one saw assembly, pivoting range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripper for bar offloading, positioning speed up to 180 m/min - PC machine controller: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulation buffer for transfer of profiles to steel insertion and screw stations; steel insertion station with 8 insertion slots - Monitor for steel length display - Automatic label printer Schirmer SZA 450 Automatic Steel Cutting Unit: - Automatic feed magazine, max. profile length 6,000 mm, profile width 25–50 mm, profile height 15–60 mm, wall thickness max. 4 mm - Feed unit - Standard saw unit for 90° cuts - Automatic bar offloading - Belt conveyor - Draw-out device - Steel offcut processing - Steel length measurement in feed magazine Schirmer Buffer Screw-in Station: - Feed unit for PVC profiles up to 3,900 mm - Automatically adjustable profile guides - Screw-driving station - Steel insertion finger for reinforcement profiles up to 200 mm insertion depth Schirmer SBZ I Bar Processing Centre: - Feed unit for PVC profiles up to 3,900 mm - Automatically adjustable profile guides - Touch probe for automatic detection of the zero point at profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, 1 axis for X-feed - NC-controlled gripper for bar offloading - Special belt conveyor for lateral discharge Pedpfxoy Nnnno Aqtsgn - Closure component visualisation software including monitor - Screw-driving station with automatic screw feeder - Helmet rail with balancer for bar screw assembly - Bar screw assembly with automatic screw feeding System performance: Approx. 120 window units 1400 x 1500 mm / 8 hours If a further screw-assembly unit is installed in the buffer screw-in station, output increases to approx. 160 units / 8 hours Sale on behalf of the customer, ex site near 30625 Hanover, without dismantling, transportation and installation. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. For used machines, all warranties are excluded. Sale is “as inspected and approved”.

Tilstand: klar til bruk (brukt), Byggeår: 1991, vandring X-akse: 1 500 mm, vandring Y-aksen: 700 mm, bevegelsesavstand Z-akse: 550 mm, spindelhastighet (maks.): 2 066 o/min, totalvekt: 4 000 kg, Heidenhain 3-axis DRO feed drives Pgsdpfxjwqcv Nj Aqton automatic lubrication external electrical cabinet table 2000x460 mm travels 1500x700x550 mm weight 4000 kg

Byggeår: 2020, Tilstand: god (brukt), Ca. 8 – 10 units of throughput scales / automatic scales for use in a conveyor system, Mettler Toledo – used – Price per unit: €2,950 ex works (net), dismantled, packed, and loaded! Manufacturer: Mettler Toledo For example (a more detailed list will follow): Pos. 48 Automatic Scale Year of manufacture: 2020 Type: C 21 TLW250Cargo Max. 35,000 grams Min: 100 grams T = -35,000 g 230V Belt width: approx. 49cm Element width: approx. 55cm Length: 1.07m Terminal / Display: ICS469d-cargo ICS4x9-1 110–240V – 50/60Hz, 300mA Without position number: Automatic Scale Pgodpfx Aoq U Rq Hjqten Year of manufacture: 2014 Type: ICS469-100 Max. 40,000 grams Min: 200 grams D = 5g T = -40,000 g 230V Without position number (suspended from the ceiling): Automatic Scale Year of manufacture: 20?? Type: C21 TLW250 Cargo Type: LCC300 Max. 300kg Min: 200 grams D = 5g T = -40,000 g 230V

Tilstand: svært god (brukt), Byggeår: 2019, maskin-/kjøretøynummer: 1013, REF: MM6216 1 x Comek vertikal posepakker med Zodiac HS-skjerm Teknisk spesifikasjon ⚙️ ✅ Produsent – Comek Automatic Packaging Solutions ✅ Modell – VPB 330 EVO ✅ Serienummer – 1013 ✅ Produksjonsår – 2019 ✅ Vekt – 2.500 kg ✅ Installert effekt – 10 kW Pgodpfsxd Ubnex Aqtjn ✅ Tetningskjever – 330 mm (horisontalt) x 460 mm (vertikalt) ✅ Totale dimensjoner – 2.000 mm lang x 1.500 mm bred x 1.800 mm høy Merknad 🗒️ Ingen skriver.

Tilstand: klar til bruk (brukt), Byggeår: 2001, To identiske Volvo L180D hjullastere er tilgjengelige. Driftstimer: ca. 30 000 t, Vekt: 32,7 t, Motortype: Volvo TD 122 KHE, Nominelt turtall: 2100/min, Effekt SAE J1995 (brutto): 209 kW (284 hk), Effekt ISO 9249/SAE J1349 (netto): 206 kW (280 hk), Maksimalt dreiemoment ved 900/min, Dreiemoment SAE J1995 (brutto): 1580 Nm, Dreiemoment ISO 9249/SAE J1349 (netto): 1580 Nm, Slagvolum: 12 l, Driftsspenning: 24 V, Batterier: 2x 12 V, Batterikapasitet: 2x 140 Ah, Startstrøm per batteri: 1050 A, Reservekapasitet per batteri: 290 min, Dynamo: 1680 W/60 A, Startereffekt: 6,6 kW (9 hk), Driftsvekt: 26–29 t. Utstyr: Motor: Høyeffektiv dieselmotor med lave utslipp, 6-sylindret rekkemotor, direkteinnsprøytning, turbolader, ladeluftkjøler, 4-takt, utskiftbare sylinderforinger. Luftfiltreringssystem: trinnvis tredelt. Kjølesystem: hydrostatisk drevet vifte med separat kjølekrets for ladeluftkjøler. Dreiemomentomformer: en-trinns. Gir: Volvo HT 220 automatisk powershift-girkasse med mellomaksel og enhåndsbetjening. Girskiftesystem: Volvo Automatic Power Shift Generation II (APS II) med kjøremodusvelger. Aksler: Volvo-aksler med fullflytende aksling og planetnavreduksjon, akselhode i støpejern, stiv foraksel, pendelende bakaksel, 100 % differensialsperre foran. Girtype: Volvo HT 220, Dreiemomentmultiplikator: 2,27:1. Bremsesystem: Våt-skivebremser, helt innkapslet, oljekjølt, montert utvendig på akslene. Befaring på stedet er mulig. Pedpfx Ajzadmaeqtjgn

Tilstand: brukt, Byggeår: 2018, driftstimer: 8 800 h, Utstyr: firehjulsdrift, Liebherr L 546 Z 2plus1 Serviced exclusively by Liebherr – all services performed – up to 8,165 operating hours as of 23.04.2025 Original paint Chassis no.: VATZ1560CZB049144 Year of manufacture: 2018 Operating hours: approx. 8,800 4-cylinder inline engine, 120 kW / 163 HP, water-cooled, turbocharged, Emission Stage IV Operating weight: approx. 15,000 kg Machine width: 2,500 mm Hydrostatic drive with 3-speed transmission * 3rd hydraulic circuit for attachments such as high tip bucket, grab bucket, etc. * Ride control (BSS) – boom suspension * Central lubrication system factory-installed by Liebherr * Fluff screen in front of radiator unit prevents contamination * Coarse-mesh cooler for easier cleaning * Reversing fan for radiator cleaning – reverse operation * Automatic engine shut-off after 5 minutes at idle * Access aid in front of windscreen for easier cleaning * Air filter with TopAir pre-separator for preliminary air intake filtration * Premium touchscreen display * "Comfort" driver’s seat with pneumatic suspension, seat heating, and headrest * Air conditioning * Adjustable steering column * Right armrest * Opening window on left side of driver’s door * Foldable exterior mirrors * Radio with hands-free system * Cool box in the cab * Acoustic reverse warning (beeper) * Rearview camera * 4 LED work lights on the rear roof of the cab * 4 LED work lights on the front roof of the cab * Guard for driving lights * Piston rod guard for tilting cylinders * Automatic bucket return * Fire extinguisher mounted on fender Rearview camera defective! Tires: 20.5 x 25 BKT Earthmax L3, Front axle: 2 x 30% tread remaining Tires: 20.5 x 25 BKT Earthmax L3, Rear axle: 2 x 30% tread remaining Net price including fixed-mounted earth bucket approx. 2.8 m³: €63,900 net + VAT --- Optional equipment available at extra cost: · Hydraulic quick coupler €3,550.00 Pgjdpfezb S Ihsx Aqten · Grab bucket 3 m³ €3,980.00 · High volume bucket 5 m³ €3,990.00 · High-tip bucket from 3–5.5 m³ from €3,950.00 · Pallet forks 5 or 8 tons from €2,190.00 Optional scale available: Pfreundt WK50 €3,900 Optional Pfreundt printer also available All prices are net export – for domestic purchases plus 19% VAT. Transport can be arranged upon request. Sale to businesses or for export only. Sale as-is, where-is. No warranty or guarantee. The stated mileage and/or operating hours are read from the odometer/hour meter; no guarantee is given for their accuracy! Subject to prior sale. Vehicle description does not constitute a binding offer, and the information provided is not to be regarded as confirmed characteristics. The description and listed details are for general identification of the vehicle only and do not represent a warranty under sales law. The details are not claimed to be complete. All information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the stipulations in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors.

Tilstand: brukt, Byggeår: 2021, maskin-/kjøretøynummer: A2536805, pressekraft: 40 t, Hidralmac C-frame press – 40 t forging press – Stroke 250 mm For sale is a hydraulic single-column press (C-frame) from Hidralmac with a pressing force of 40 t. The machine is designed for forging, forming, and bending operations and can be custom-built to customer specifications. Thanks to adjustable speeds, precise position control, and flexible operating modes, it is suitable for both manual setup work and automated processes. ==== Technical specifications + information: Hydraulic C-frame press – 40 t ==== General Information - Manufacturer: Hidralmac - Model: C-frame press / forging press - Design: C-frame - Pressing force: 40 t - Construction time: approx. 3 months from receipt of payment ==== Working area - Daylight: 450 mm - Stroke / Travel: 250 mm ==== Table & Ram - Table plate: 600 × 650 mm with T-slots - Ram plate: 500 × 200 mm - Table opening: 200 × 170 mm - Table height: 850 mm ==== Speeds - Approach speed: max. 90 mm/s - Pressing speed: 10 mm/s - Return speed: max. 90 mm/s - Setup mode speed: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor power: 5.5 kW - Oil tank: 200 l - Return force: 6.3 t ==== Control & Functions - Positioning accuracy: ± 0.5 mm - Adjustable dwell time: 0 – 10 s (in 0.1 s increments) - Pressing pressure adjustable via control system - Switch between manual and automatic operation via key switch - Two-hand operation for safe use - Sensor-based position control (top dead center, bottom dead center, switchover point) Psdpfjfxyhfox Aqtogn ==== Operating modes - Manual setup mode with stop at any time - Bending operation via two-hand control - Automatic mode for closed tools - Optional use for punching, notching, and bending operations ==== Forging work, forming technology, bending processes, punching operations, notching, small batch production, toolmaking Single-column press, C-frame press, forging press, hydraulic press, industrial press, bending press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our great strength lies in special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly affordable prices. The hydraulics of our presses primarily use components from leading European manufacturers.

Tilstand: god (brukt), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang, BC-40 CA – used - : Price ex location: only €5,950 (net)! Manufacturer: Bang & Co Model: BC-40 CA Year of manufacture: The BC-40 CA is a fully automatic, horizontal stretch wrapper for bundling and spiral wrapping products that are to be fixed on a corrugated cardboard blank. After activation of the foot switch, the machine automatically centers the blank placed on the infeed conveyor and feeds it to the rotating ring. The size of the blank is automatically detected and assigned to one of ten adjustable wrapping programs. The feed and rotating ring speeds are adjustable and controlled via frequency converters. The product is fully automatically fixed onto the blank by the machine, and a clamping and cutting system applies and cuts off the film at the start and end of the wrapping cycle. The machine features a quick-change system for film roll replacement. Max roll diameter: 150 mm Film width: 70-125 mm Roll core diameter: 38 mm Film thickness: 15-35 µ Ring rotation speed: 30-140 rpm Psdpfxjy Ru Nus Aqtsgn Power supply: 220/240 V – 50/60 Hz 1 PH Machine weight: 320 kg Machine start: foot switch Length of infeed and outfeed conveyors: 1500 / 500 mm Compressed air consumption NL/min: 0.75 l/m³ Compressed air: 6 BAR Compressed air consumption per cycle: 0.15 Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Tilstand: ny, Byggeår: 2026, CORMAK HBS320 for double-sided miter cutting within a range from -45 to +60 degrees. The machine’s design is based on solutions and projects by Polish engineers. Its precision and accuracy places it among the leading band saws in its class, with the ability to cut up to 320 mm in width. A key advantage of the machine is the latest generation hydraulic cylinder. The machine features a reinforced vise base and quick-clamping vise. Machine features The CORMAK HBS320 metal band saw enables cutting material at any angle within a range from -45° to +60°. The workpiece can be fed manually or using any feeder device. The feed during cutting occurs gravitationally, based on oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. Upon cycle completion, the machine automatically stops, and the operator returns the arm to the starting position. Saw arm is made from a very solid, one-piece gray cast iron casting. Together with a 27 mm wide cutting blade, it reliably handles mass series cutting of structural steel, stainless and tool steels. The vise is mounted on an adjustable bed and equipped with a fast clamping mechanism. Blade guides feature ball bearing systems and carbide inserts, ensuring excellent precision and cut straightness. This dramatically improves blade tracking, blade life, accuracy, and cutting quality. Carbide guides significantly reduce wear of both the machine and the blade. The base is a rigid welded steel sheet construction. Inside is a separate coolant tank with an electric pump. The upper part of the base forms a tray for draining coolant and collecting metal chips formed during cutting. A work table made of cast iron with a swiveling arm and a control panel is mounted on the base. Feed rate is controlled from the operator panel. Two cutting blade speeds, 44 and 88 m/min, are selectable. When the arm reaches its lowest position – having completed a cut – the blade drive shuts off automatically. Safety features include blade guards and micro-switches, which stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection involves automatic shut-off in case of blade breakage. Technical specifications - Maximum diameter (perpendicular cut): Ø 260 mm - Maximum height x width (perpendicular cut): 320 x 160 mm - Power supply: 3-phase 400V - Total power: 1.5 kW - Arm descent adjustment: hydraulic cylinder - Blade dimensions: 2740 x 27 x 0.9 mm - Blade speed: 44 / 88 m/min - Vise base height: 920 mm - Dimensions (L x W x H): 1400 x 880 x 1550 mm - Weight: 280 kg Cutting parameters | Angle | Max Ø | Max height x width | Max square | |-----|-----|-----|-----| | 0º | 260 | 320 x 160 | 255 x 255 | | 45º R | 210 | 210 x 200 | 210 x 210 | | 60º R | 135 | 135 x 130 | 130 x 130 | | 45º L | 160 | 220 x 130 | 160 x 160 | Pgsdpfsi D Dgwox Aqton The price shown is NET (excluding VAT). Transport costs are not included. For further information, please contact us by phone or email. We invite you to view our full offer on our website.

Tilstand: svært god (brukt), Byggeår: 2017, Funksjonalitet: fullt funksjonell, Stiller STA 1500 – Full-automatic Can Sealing Machine (incl. Markem-Imaje 9450 Printer) The Stiller STA 1500 is the ideal stand-alone solution for companies wishing to seal small to medium batches efficiently, reliably, and fully automatically. As a complete system, this unit features an integrated outfeed conveyor equipped with a perfectly coordinated Markem-Imaje type 9450 continuous inkjet printer. This enables your cans to be sealed with precision and simultaneously marked in accordance with standards (e.g., with best-before date or batch number) in a single operation. The machine impresses with its robust stainless steel construction, extremely user-friendly Siemens PLC controller, and quick, tool-free format changes thanks to automatic height adjustment. Technical data & features: Capacity: up to approx. 1,500 cans/hour Marking system: Integrated Continuous Inkjet Printer Markem-Imaje 9450 (optimized for high-contrast, smudge-proof printing on tinplate, aluminum, or composite cans; easy code management via touchscreen) Operating range, diameter: Ø 52 mm to 99 mm (other diameters available on request) Pedey Uxgfjpfx Aqtjgn Operating range, height: 30 mm to 200 mm (automatic height adjustment for up to 30 mm without machine conversion) Controller: Siemens PLC with text display for operating states and error messages Drive / connection: 0.95 kW, 3 x 400 VAC, 50 Hz Construction: Enclosure and control cabinet made completely of stainless steel; mobile on 4 swivel castors with parking brake Dimensions (LxWxH): approx. 200 x 80 x 180 cm (working height: 100 cm) Weight: approx. 380 kg

Tilstand: klar til bruk (brukt), Byggeår: 2021, Funksjonalitet: fullt funksjonell, total høyde: 2 200 mm, total lengde: 1 700 mm, total bredde: 1 100 mm, rotasjonshastighet (maks.): 2 650 o/min, effekt: 1,6 kW (2,18 hk), vanntankkapasitet: 100 l, ROSLER RZ 150 A Cleaning System – Automatic Sludge Removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This industrial-grade, fully automated system is equipped with state-of-the-art solutions that improve efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminium alloy • Steel housing Equipment and features: • Smooth start and stop via frequency inverter • Adjustable sludge removal speed • Automatic retraction of cleaning blade • Automatic residual water removal • Electronic vibration control • Automatic rotor rinsing • Special bearing lubrication system to extend device lifespan Central control unit E61-400: • Controls and monitors the cleaning system operation • E61-400 type control unit • SIEMENS S7-1200 controller • Ensures fully automatic and stable system operation Sludge removal time adjustable between 2 and 5 minutes, depending on consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: Psdpozca Apefx Aqtogn • Sandpiper P9 diaphragm pump for water delivery to the centrifuge • Pump operation cycle control • Water level monitoring in the tank The set also includes a P 100 SB-P9 buffer tank for dirty water residue from the centrifuge. This tank is required when the centrifuge is located further from the dirty water source. Buffer tank P 100 SB-P9: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor rinse water to the buffer tank • Made from durable HDPE polyethylene (black color) • Slanted, 3-sided funnel-shaped bottom • P9 diaphragm pump – 4 bar operating pressure • Water level monitoring RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Transport and emptying possible using a forklift • Made of steel • Discharge opening with drain plug • Equipped with tilting mechanism The unit is robust, efficient, and ready for operation.

Tilstand: ny, Byggeår: 2025, OMCN 100 Ton Electro-Hydraulic Press Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press equipped with high-speed motor, pressure gauge, and double-speed hydraulic unit featuring vane pump for rapid approach and return, as well as axial piston pump for the working phase. Fitted with pressure relief valve and three-position control distributor (advance, neutral, return). The machine is supplied with oil. Equipped with a winch for lifting the worktable. The ram is made of special treated and chromed steel. Pgjdofh R Nyepfx Aqten The press is equipped with two-hand control and simultaneity system, in compliance with current safety regulations. Comes with protective rear and side panels. CE certified, including electromagnetic compatibility. Ram stroke: 310 mm Internal clearance: 1,010 mm

Byggeår: 2021, Tilstand: svært god (brukt), Memmert ICH Climate Chamber 260L, year 2021. The unit comes with a one-year spare parts warranty. Manufacturer’s description Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10°C to +60°C when humidity and/or lighting are activated Temperature setting accuracy 0.1°C Temperature sensor 2 x Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, with automatic takeover in case of failure Humidity Humidity Humidity supplied via distilled water from an external tank using a self-priming pump Humidification Humidification is performed by a hot steam generator Humidity control Active humidification and dehumidification of air adjustable in the range of 10-80% relative humidity with digital RH display – display resolution 0.1%, setting accuracy 0.5% Lighting Light Daylight and ultraviolet lighting can be individually programmed via controller Light Cold white light ±6%, for UV light ±10% Light Lighting unit consisting of 4 cold white fluorescent tubes (standard D65, 6500 K) and 2 UV lamps covering the wavelength range 320–400 nm Podpfszam Hiex Aqtegn

Tilstand: brukt, maskin-/kjøretøynummer: 2801-0234, x-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Speed range: 31 - 3150 rpm Feed rate: 1 - 3600 mm/min Rapid traverse: 4000 mm/min Spindle mount: SK 40 Psdpfx Aqjcxxm Estegn Head swivels: +/- 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Space requirements approx.: 1.3 x 1.1 x 1.6 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swiveling +/- 90° with 60 mm quill stroke, horizontal spindle, power feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, enclosed chip guard with chip tray, separate control cabinet. The machine is in good condition.

Tilstand: nesten som ny (brukt), Byggeår: 2014, Funksjonalitet: fullt funksjonell, SCM TF130 CLASS Spindle Moulder Used machine Year: 2014 Features: Manual adjustment for spindle elevation, with digital display for setting the working height Registerable spindle fence with wooden tables, extraction hood, and wooden table extension, max tool diameter Ø250 mm Spindle speed: 3000/4500/6000/7000/10000 rpm Electronic display of selected spindle speed Electrical pre-wiring for feeder connection Reverse direction capability for spindle with electric interlock for starting Pjdpfsy R Tw Dex Aqtsgn Automatic star-delta start Motor power [S6 -40%] 7kW / 9.5HP / 50Hz Guarding for shaft machining (max tool diameter Ø160 mm) Emergency stop button Safety micro-switches on spindle lock Safety micro-switch for motor access door Lockable main switch Magneto-thermal protection 110V transformer for auxiliary circuits Automatic motor brake on main motor EC compliance certificate Technical Data: Table size: 1200x730 mm Usable spindle length CE Ø30/35(40/50): 140(180) mm Spindle overhang above table: 52 mm Spindle overhang above table with interchangeable spindle: 92 mm Max retractable tool diameter below table, with ring table: 320x85 mm (with Fast sector table: 300x85 mm) Fence travel with mechanical setting: 125 mm (fence positioning relative to spindle axis from -125 to +125 mm with MK5 spindle) Extraction hood outer diameter (on spindle shroud): 120 mm Extraction connections (on machine base, for forced air cooling of electrospindle): 120 mm Extraction airflow speed: 20 m/s Extraction system air consumption: 1700 m³/h Optional Equipment: Bar fence "TL" version for tenoning and profiling (EC) – with manual feed tenoning carriage, – eccentric clamp, – adjustable telescopic fence with 4 reference stops for programming workpiece length, – 1 anti-kickback device with reference stop on fence, – 1 complete infeed table extension with adjustable front support bar for large workpieces, – Tenoning hood with extraction: – Quick tool change, max tool diameter 300 mm, – With Ø30-35 mm spindle, max tool diameter 300 mm, – With Ø40-50 mm spindle, max tool diameter 350 mm, – Emergency stop button, – Operator protection arm, – Micro-switches for control and speed limitation to 3000/4500 rpm during tenoning operations. Note: Available only for machines configured according to EC standards. Available only with a mechanically adjustable spindle fence or alternatively the "Flex" spindle fence. A minimum main motor power of 7 kW is required.

Tilstand: brukt, Byggeår: 1999, Diameter 3 - 16 mm Pjdpfxotqqp Io Aqtogn Length 3000 mm = automatic bar loading magazine For bar diameters of 3 - 16 mm, bar length 3000 mm, capacity e.g. 23 bars of 8 mm diameter each

Tilstand: ny, Funksjonalitet: fullt funksjonell, totalvekt: 835 kg, egenvekt: 835 kg, driftsvekt: 835 kg, Byggeår: 2026, HYDRAULIC HAMMER SHB100 The STEELITE hydraulic hammers in the medium size class impress with high impact force, robust design, and reliable performance for daily construction site use. Ideally suited for demolition, civil engineering, road construction, and recycling tasks, they offer an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-dampened design ensures high working comfort and reduces stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. Pedpsy St Husfx Aqtogn YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact force with a compact design - Very good spare parts availability - Various mountings possible - Ready for immediate use SCOPE OF DELIVERY - SHB100 hydraulic hammer - 1 x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 835 kg - Oil flow: 80–110 l/min - Max. operating pressure: 210 bar - Chisel diameter: 100 mm - Automatic lubrication system - Equipment damping - Suitable for carriers: 10 – 14 t Advantages of the STEELITE hydraulic hammers - High demolition performance with smooth running characteristics - Efficient power transfer for economical operation - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal ratio of performance, weight, and durability

Tilstand: nesten som ny (brukt), Byggeår: 2021, Optimum OPTImill MZ 2S Universal Milling Machine Ideal for training workshops! Available for immediate delivery. Equipped with a NEWALL DP 700 3-axis digital position display. Feed axes are controlled via the operator panel with inverter drive. Key Features: - Versatile range of applications - Excellent vibration dampening and machine bed stability - All guideways hardened, precision ground, and adjustable via gib strips - Automatic feed on X, Y, and Z axes - infinitely variable via electronic joystick on the control panel - Electric feed limit shutoff - Precision-ground ball screw on all axes - Centrally and clearly arranged operator panel with integrated digital position and speed display - Robust and generously dimensioned cross table, precisely machined, with 5 T-slots - Coolant system - Large, graduated handwheels - Machine lamp included - Smooth running - Manual centralized lubrication system TECHNICAL DATA Dimensions and Weights: Length (product): approx. 1239 mm Width/Depth (product): approx. 1168 mm Height (product): approx. 1900 mm Weight (net): approx. 1400 kg Milling Head: Swivel range: ± 90° Drilling/Milling Capacity: Max. cutter head diameter: 100 mm Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 26 mm Max. shank cutter diameter: 25 mm Electrical Data: Main drive motor power: 2.2 kW Connection voltage: 400V Mains frequency: 50Hz Horizontal Milling Table: Length: 750 mm Width: 320 mm Vertical spindle to horizontal table min.: 75 mm Vertical spindle to horizontal table max.: 410 mm T-slot size: 14 mm Number of T-slots: 5 T-slot pitch: 63 mm Horizontal spindle to table min.: 70 mm Horizontal spindle to table max.: 400 mm Max. table load: 285 kg Vertical Milling Table: Length: 830 mm Width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot pitch: 63 mm Coolant System: Coolant pump drive power: 95 W Travel: Manual travel X-axis: 400 mm Manual travel Y-axis: 200 mm Manual travel Z-axis: 335 mm Automatic travel X-axis: approx. 310 mm Automatic travel Y-axis: approx. 160 mm Automatic travel Z-axis: 295 mm Vertical Spindle: Overhang: 100 mm Spindle taper: ISO 40 DIN 2080 Speed range: 50 – 1890 rpm Number of speed steps: 12 Pedpfxjuqix Ue Aqtjgn Drawbar: M 16 Quill stroke: 120 mm Max. spindle load: 1100 Nm Feed Rate: Feed rate X-axis: 10 – 600 mm/min Feed rate Y-axis: 10 – 600 mm/min Feed rate Z-axis: 10 – 600 mm/min Electrical Connection: Total connected load: 4 kW Motors: Rapid traverse X-axis motor: 0.375 kW Rapid traverse Y-axis motor: 0.375 kW Rapid traverse Z-axis motor: 0.375 kW

Tilstand: ny, Byggeår: 2026, pressekraft: 15 t, C-press – 15 t – 300 × 300 mm For sale is a C-frame press from manufacturer DURENDUS with a maximum pressing force of 15 t. The machine features a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for pressing tasks, assembly operations, and small-batch production in industrial settings. ##### Technical Data & Information: ==== General Information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 t - Table size: 300 × 300 mm - Ram plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Ram plate guidance: double guided ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Approach speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Delivery rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure adjustment via touchscreen - Stroke adjustment via touchscreen - Hydraulic oil temperature monitoring - Fault indication via display - Remote service / remote maintenance possible - Operation: two-hand control ==== Safety - Light barrier - Two-hand control - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive power: 2.2 kW - Lighting: LED - Control cabinet protection class: IP 54 ##### Pedey Twg Ispfx Aqtegn Fields of application: pressing, assembly work, small-batch production, fixture construction, toolmaking, metalworking, fine assembly, testing operations, workshop applications (hydraulic press, hydraulic C-frame press, single-column press, 15 t press, 15 tonne press, assembly press, insertion press, small batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety standard NR 12, which builds upon these standards. Our key strengths are special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses primarily use components from leading European manufacturers.

Tilstand: nesten som ny (brukt), Byggeår: 2023, SCM Accord 40 fx CNC machining center with the following features: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx version PRO-SPEED OF0168 Pendulum operation capability OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet Pedpfxoyfgzdj Aqtegn 450328 eye-M PRO operator console with integrated PC 450291 Additional fixed operator panel 870068 TECPAD – remote control for machine functions 560058 No.10 MATIC support rails – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle drive "Prisma KT-KS" 470014 Air nozzle for tool 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 F16 drilling unit OF0176 Front stop row H50 for worktable with 10 support rails 510205 Clamping jaw preparation for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm – 36 pcs 480006 Suction cups H110 145x55 mm, rotatable – 10 pcs 480007 Suction cups H110 180x65 mm, rotatable – 10 pcs 480018 Suction cups H110 145x30 mm, rotatable – 5 pcs 480410 Lifting devices H110 – 8 pcs 350016 Vacuum pump 250 (300) m3/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy-saving system 210837 TR12 lateral tool magazine 210056 Rapid 24 rear-mounted tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface (HMI) software MAESTRO ACTIVE OF0543 Windows 10 embedded 64-bit operating system OF0422 Machine control interface software Maestro cnc OF0435 Hardware key for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL EXECUTION INCLUDED IN MACHINE CONFIGURATION: - Extension of max. panel width to 2,120 mm fully machinable. The traverse length remains unchanged at 1,900 mm. - 10 pcs support suction cups for offcuts MACHINE ALREADY DISMANTLED AND IN STORAGE. LIST PRICE 2023 EUR 399,890.--

Tilstand: svært god (brukt), Byggeår: 1999, H+K four-sided planer and thicknessing machine Quadroplan 180 Planing width: 20–180 mm Planing height: 5–120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic floating head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed system Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction connection: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Idling outfeed roller Automatic central lubrication Automatic star-delta switching INCLUDES 4 reversible cutter heads INCLUDES operating manual & wiring diagram CE compliant All ball bearings NEW All V-belts NEW Note on used machinery: Pgodpfxoydmaws Aqten • Subject to errors in technical details and prior sale. • Stated prices are ex-site—free loading! • Machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Tilstand: god (brukt), Funksjonalitet: fullt funksjonell, Full-hydraulic circular saw automatic machine, manufacturer: TRENNJAEGER Technical specifications: Saw motor, pole-switchable: 1.5 / 2.0 kW Saw blade: 275 mm Pgjdpfxjza Hnms Aqton 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min - Integrated hydraulic system - Safety enclosure with limit switch protection - 6 saw speeds