Kjøp brukt Automatica Dvpgp (508)
Sorter resultater
- Laveste pris Høyeste pris
- Nyeste annonser Eldste annonser
- Korteste avstand Største avstand
- Nyeste produksjonsår Eldste produksjonsår
- Siste oppdatering Eldste oppdatering
- Produsenter fra A til Å Produsent fra Z til A
- Relevans
- Laveste pris
- pris
- Høyeste pris
- pris
- Nyeste annonser
- Innstillingsdato
- Eldste annonser
- Innstillingsdato
- Korteste avstand
- avstand
- Største avstand
- avstand
- Nyeste produksjonsår
- produksjonsår
- Eldste produksjonsår
- produksjonsår
- Siste oppdatering
- oppdatering
- Eldste oppdatering
- oppdatering
- Produsenter fra A til Å
- produsent
- Produsent fra Z til A
- produsent
- Betegnelse fra A til Å
- Betegnelse
- Betegnelse fra Z til A
- Betegnelse
- Modell fra A til Å
- Modell
- Modell fra Z til A
- Modell
- Laveste referanse
- referanse
- Høyeste referanse
- referanse
- Korteste driftstid
- Driftstid
- Lengste driftstid
- Driftstid
- relevans
- relevans
Annonse
Bremen
823 km
Bearbeidingssenter - vertikal
MAZAKVTC-820/20
Ring
Tilstand: brukt, Byggeår: 2019, x-axis travel: 2,000 mm
y-axis travel: 820 mm
z-axis travel: 720 mm
Control: Mazatrol Smooth G
Spindle taper: SK 40
Spindle speeds: 35 - 12,000 rpm
Spindle drive power: 22 kW
Distance from spindle nose to table top: 140 - 860 mm
Table load capacity: 1,700 kg
Rapid traverses x/y/z: 50 m/min
Table width: 820 mm
Table length: 2,500 mm
Table height above floor: 870 mm
T-slots: 7
T-slot width: 18 mm
T-slot spacing: 100 mm
Tool changer: 48 positions
Tool change time: 4.7 sec
Tool diameter with 2 adjacent vacant pockets: 130 mm
Tool diameter with full tool magazine: 80 mm
Max. tool weight: 8 kg
Max. tool length: 350 mm
Required air pressure: 5 - 9 bar
Air consumption: 260 l/min
Electrical specification – voltage/frequency: 400 V / 50 Hz
Coolant tank capacity: 450 l
High-performance coolant system: 25 bar
Total power requirement: 46.7 kW
Machine weight approx.: 14.8 t
Space requirements approx.: 4.3 x 3.6 x 3.1 m
STANDARD EQUIPMENT
Adaptation for the European market
USB port (1 port)
Mazak standard color
Spindle speed 12,000 rpm (steep taper 40)
Work area lighting
SAFETY FEATURES
Operator door with interlock switch
Work area enclosure
Splash guard encloses the work area from the side.
Fully enclosed work area
Protection against chips, coolant, and access to the work area during automatic operations.
Safety devices conform to global standards
COOLANT SUPPLY
Coolant supply through spindle (pump pressure = 5 bar)
Complete coolant system includes pumps, valves, piping, and nozzles for efficient production of quality components.
FACTORY AUTOMATION
Podpfotuggcox Aqtsgn
Automatic on/off and warm-up function
Automatic warm-up activation via digital timer
MEASURING SYSTEM
Tool length measurement and tool breakage detection
CHIP DISPOSAL
Factory-prepared for chip conveyor (left side)
NUMERICAL CONTROL
Fixed control/operating unit
Relocation detector
Mazatrol SmoothG control
19" LCD color monitor (touch screen)
Mazak thread tapping/drilling cycle Tornado (Mazatrol)
With boring and thread tapping in helical machining mode, a wide range of diameters can be machined at high speeds with just one tool. This function minimizes programming and machining times.
EIA/ISO input function
Background tool path verification
The tool path of a program can be checked even if another program number is called and being executed in automatic mode.
3D coordinate transformation
Form compensation for rotary axes
Mazacc-2D software (contour compensation)
Accuracy is maintained at high feed rates.
Software package Mazacc-3D for high-speed machining
High-speed, high-precision machining for contours defined at very fine program increments.
MAZACC-3D high-speed software package (NO456) is required additionally.
High smoothing control
LAN interface
SD memory card I/F
Smooth Standard Software for M/C
- NO443 B) MAZACC-2D software (workpiece form compensation)
- NO444 D) MAZACC-3D high-speed software package
- NO445 B) Form compensation for rotary axes
- NO497 D) High-precision control for finishing operations
- Seamless corner control
- ...
Annonse
Bad Sooden-Allendorf
1 030 km
Kantlistmaskin
HOLZ-HERTriathlon 1488
Ring
Tilstand: ukontrollert (brukt), Byggeår: 2006, for roll and strip material from 0.4 - 15 mm
max. panel thickness 60 mm
max. edge overhang 66 mm
large magazine table D=820 mm
transport chain with automatic lubrication
hold-back roller for shortest workpiece intervals
safety/soundproof hoods
central extraction port D=160 mm, jointing cutter D=120 mm
chip collection box D=100 mm
equipped with:
> Jointing unit 1961 incl. DIA cutter
> programmable screen control Edgecontrol
> automatic edge magazine 1901 for rolls and strips
Pgedpfoy Ici Rsx Aqton
> glue station 1905 for cartridges + granules, incl. sensing nozzle
> pressure unit 1926 motor/pneumatic
> end trimming unit 1819 motorized
> flush milling unit 1962
> multifunctional milling unit 1966 with various radii/chamfer
> multi-radius scraper unit 1965 with various radii
> corner rounding 1983 R=2 mm incl. one interchangeable motor R=1 mm
> flat scraper 1964 actuator-controlled
> buffing unit 1944 immersion-controlled
> spray device 1856 at infeed and outfeed
> belt bridge
> stepless feed up to 24 m/min
> scissor-type outfeed support
> motorized bridge adjustment
> infeed fence motorized adjustable
Length 8200 mm
Width 1300 mm
Height 2000 mm
Weight 3300 kg
Annonse
Tyskland
1 043 km
Saddersøm
MÜLLER MARTINIPrima Amrys
Ring
Tilstand: brukt, Byggeår: 1998, Mueller Martini Prima Amrys fra 1998 er en fullutstyrt og svært effektiv samlehefter med syv materbaner, ett omslagsanlegg, en konvolutteringsmaskin, en etiketteringsstasjon og et kortpåsettingsaggregat. Maskinen er utstyrt med Automatic Make Ready System (AMRYS), en treknivstrimmer, en Mueller Martini 227 konvolutteringsmaskin med fire stasjoner samt valgfrie komponenter som inkjet-enhet og Mosca RO-TR-500. Maksimal mekanisk hastighet er 13 000 sykluser per time og den håndterer formater fra 90 x 105 mm til 320 x 480 mm.
Format: 320 x 480 mm
Utstyr:
– Materbaner
Antall materbaner: 7x 370
– Omslagsmater: 1x 1529
– Kortpåsettingsaggregat: ja
– Hefteenhet
Type: Prima Amrys
2x hefthoder
AMRYS – automatisk omstilling
– Treknivstrimmer
Type: Mueller Martini 360
– Levering
Type: Mueller Martini 310 CS-20
Pedpswcqygefx Aqtogn
Serienummer: 97.00900.05
Utkast til høyre
– Tilvalg (tilgjengelig på forespørsel)
Stapler
InkJet-system
Opprullingsenhet
Forsendelses- og lukkemaskiner
– Innsettingsmaskin
Type: Mueller Martini 227
Antall stasjoner: 4x
Tekniske detaljer
Min. format: 90 x 105 mm
Maks. format: 320 x 480 mm
Maks. mekanisk hastighet: 13 000 sykluser/time

Få informasjon nå
+44 20 806 810 84
+44 20 806 810 84
Legg inn annonse nå
*per annonse/måned
Annonse
Braunschweig
915 km
Emballeringsmaskin for netthandel
BVM BrunnerCOMTEX 4G
Ring
Tilstand: helrenovert (brukt), Byggeår: 2017, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 20170259471, total lengde: 22 000 mm, total høyde: 2 000 mm, total bredde: 2 000 mm, styreskapets lengde: 2 400 mm, styreskapets bredde: 400 mm, garantiperioden: 12 måneder, styreskapshøyde: 2 200 mm, år for siste overhaling: 2025, Sideseal Machine
- Manufacturer: BVM Brunner GmbH & Co. KG
- Machine type: Comtex 4G
- Machine no.: 20170259471
- Year of manufacture: 2017
- BVM item no.: 5947
- Voltage, frequency: 3N 400V, 50Hz
- Connected load: P=18KW, I=26A, F=32AT
- Condition: completely overhauled with warranty
Comtex 4G Shipping:
The BVM shipping system “Comtex 4G Shipping” is the complete system for shipping various items in bags directly to the customer, including addressing. Delivery note, invoice, and goods are all packed in a tight-fitting PE film bag, provided with the address label, and handed directly to the respective logistics partner.
Technical data:
- Sealing width: 750 mm transverse, 800 mm longitudinal
- Product height: up to 250 mm
- Capacity: up to 25 cycles/min*
(Special) equipment:
- Special color
- Signal control light, 3 colors for displaying malfunction alerts
- Pre-accumulation plate, pneumatically controlled, and presence monitoring for film collection tray. Enables tray change during automatic operation (no machine stop required). Note: At this position, the working height of the Comtex is limited to 850 +/- 10 mm.
- Electronically controlled sealing bar drive (servo operation: infinitely variable speed adjustment)
- Film end monitoring by ultrasonic sensor, incl. analog input card (1 per film carrier)
- Mechanical distribution device for film waste strips with large film waste storage
- Numbering of individual wires in the packaging machine's control cabinet for Comtex 3G and Comtex 4G
- Grooves in the aluminium profile covered with plastic profile
Pgodpjw Ryt Dsfx Aqton
- Bypass conveyor as a hinged belt integrated in the Comtex after the side sealing station for transferring products out of the machine
- Film folding unit without separate control for processing flat film into centerfolded film
- Film sealing device for flat films
- PN / PN Coupler (Profinet Coupler) for establishing a Profinet connection
- Software development for PN / PN coupling consisting of release connection, interlock, and combined fault message
- Film end monitoring on film tray and fill level monitoring on film take-up, detected by light barriers, incl. 3-color signal lamp and acoustic alert
- Installation preparation for labeller, suitable models available on request, mounted in the infeed incl. electrical and pneumatic connection
- Sealing bar for producing wide seal seam with separate cold knife cut suitable for Comtex 3G, 4G, and Compacta with EGS
- Manual labelling device with linear movement (Model: Caljan Type: FPS BVM L113 L)
- Resealable film pouches using double-sided adhesive tape inside the bag, incl. tear-off perforation wheel
- Additional tear-off perforation wheel so the entire edge of the bag can be removed
- Freestanding control cabinet for Comtex with 5 meters of cable
- Two consecutively mounted index conveyors (600 x 900 mm / 600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with cut-out for installation of a scanner or camera incl. trigger light curtain for scanner
- Height adjustment of cross sealing for clearance height 220-250 mm
- Cognex Scanner System, consisting of:
-- Bottom scanner at infeed for delivery notes
-- 2 scanners from above
-- 1 scanner from above for inspection
+++Completely overhauled unit with 12 months warranty according to our attached warranty conditions+++
Annonse
Kirchheim bei München
1 385 km
CNC dreiebenk
WIAPDm 4C /1600 x3000
Ring
Tilstand: god (brukt), Byggeår: 2000, 4-baners flatbed (the 2 outer for Z-slides; 2 inner for tailstock) with traversable Z-slide on the outer 2 guides; distance 1160 mm on inner guides for tailstock 700 mm
Bed length:
mm: 5300
Center distance (turning length between chuck height and centers):
mm: 3000
Center height:
mm: 800
Turning diameter over bed:
mm: 1600
Turning diameter over cross-slide (between centers):
mm: 1400
Swing diameter over slide:
mm: 1200
Bed width outer guide:
mm: 1160
Guide width tailstock center:
mm: 700
Bed welded; stress-relieved by WIAP substitute annealing process and vibration-damped according to the pat. process WIAP® VDSF®
(Pat.Nr. 68433; Ref.4230130.30; PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073)
Guide ways ground; guides replaceable without bed disassembly
1.2 Headstock / Main drive - fixed
Number of headstocks
pcs: 1
Spindle encoder
digital / linear
Axis position monitoring
none; as rotary axis
Spindle bore:
mm: 112
Spindle nose: A15 DIN 55021
Main spindle motor: 100% duty cycle
kW: 46
Nm: 305
Motor: 1PH7184 2NE
Power module: 6SN112-1AA00-0FA
3-stage gearbox mounted behind headstock
Automatic, programmable via M function gearbox
Gear level 1: RPM: 5.6-120
Gear level 2: RPM: 16-360
Gear level 3: RPM: 45-800
Torque level 1 (100%): Nm: 15236
Torque level 2 (100%): Nm: 5290
Torque level 3 (100%): Nm: 1904
Max speed: RPM: 800
1.3 Longitudinal and cross slides
Pgjdpfxsd D Nxko Aqtsn
pcs: 1
Number of cross slides: pcs: 1
Number of longitudinal slides: digital / linear
Axis measurement system on motor: Balluf
Axis position monitoring (3-switch package): RPM: 2000
Axis drive Z-feed motor 27 Nm: mm: 1005
2 X slides independently traversable
Max distance inner
Via M function connectable X slide 1 4-position turret and X slide 2 with powered turret
kN: 27 Feed force
mm: 6000 Max feed / rapid traverse Z
mm: 63 x 10 Feed type: backlash-free ball screw
mm: 3020 Travel Z-axis
m/min: 6* Rapid traverse Z-axis (designed for 10 m/min)
RPM: 2000 Axis drive X-feed motor 1FT5076 18/22 Nm
kN: 15 Feed force
mm: 6000 Max feed / rapid traverse X
mm: 50 x 10 Feed type: backlash-free ball screw
mm: 850 Travel X-axis
m/min: 10 Rapid traverse X-axis
1.3a Tailstock
Manually adjustable; air-assisted for easy movement
Vibration-damped with taper for tailstock quill
Quill diameter: mm: 200
Quill stroke: mm: 200
Auxiliary drag device available with Z-slide
Clamping with nut & lever / ring nut with various threads around; adjustable
1.4 Guides
All guides are on ground surfaces and friction-bonded
Dimensions: mm: 90 x 50
Steel guide hardness approx.
HRc: 55 - 60
Counterguides plastic-coated
Automatic central lubrication with electronic control
Heavy units are air-assisted for smooth movement and protection against contamination via the WIAP® Press-Air process
1.5 Tool turret with driven tools
Tool turret Baruffaldi
TOER 320
Type K18.0320.12041.B
Number of positions: 8
Cylinder shank diameter: VDI 60
Turret disc diameter outer: mm: 570
Turret disc diameter VDI 60: mm: 476
Disc thickness: mm: 95
Driven tools: pcs: 4
Annonse
Borgo San Dalmazzo
1 797 km
Høy-dynamisk portalfresemaskin
FPT IndustrieDINOMAX 1
Ring
Tilstand: svært god (brukt), Byggeår: 2013, Funksjonalitet: fullt funksjonell, vandring X-akse: 4 000 mm, vandring Y-aksen: 2 200 mm, bevegelsesavstand Z-akse: 1 100 mm, mating X-akse: 50 m/min, matingshastighet Y-akse: 50 m/min, mating Z-akse: 50 m/min, bordlengde: 4 000 mm, bordbredde: 2 000 mm, spindelhastighet (maks.): 22 000 o/min, dreiemoment: 128 Nm, spindelnese: 63, CNC Heidenhain iTNC 530 S.P.
WORKING AREA
X-axis travel (longitudinal): 4,000 mm
Y-axis travel (transversal): 2,200 mm
Pedpfx Aqezb Evletegn
Z-axis travel (vertical): 1,100 mm
Maximum speed with interpolated axes: 50 m/min
WORKTABLE
Dimensions: 4,000 x 2,000 mm
Height: 300 mm
Load capacity: 15 T/m²
T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot orientation parallel to the X-axis movement.
AXIS FEATURES:
Axis feed rate: 50,000 mm/min
Acceleration: 4 m/sec²
WORKING THROUGHPUT
Maximum horizontal clearance: 3,200 mm
Maximum vertical clearance under crossbeam: 1,926 mm
Table height from floor: 330 mm
CONTINUOUS POSITIONING UNIVERSAL HEAD FOR SPINDLE HOLDER
Automatic universal head indexed at 360,000 positions (every 0.001°). Rotation is controlled by direct drive motors and managed by the CNC as a positioning axis. Automatic tool clamping. Allows undercutting up to 10°. Internal cooling system for bearings and axis motors.
B-axis rotation range: +/- 185°
A-axis rotation range: +/- 185°
Maximum axis rotation speed: 30 rpm
Maximum working torque on A/C axes: 450 Nm
Clamping torque axes: 1,400 Nm
Available spindle power (S1/S6): 22/33 kW
Available spindle torque (S1/S6): 84/128 Nm
Maximum spindle speed: 22,000 rpm
Tool holder: HSK – A63 DIN 69893
The head comes complete with a cradle for handling and storage. Using the cradle occurs outside the effective working area and therefore does not reduce the machine’s actual capacity.
30-STATION CHAIN TOOL MAGAZINE HSK:
Automatic 30-position chain tool changer, located at the rear of the work area, completely protected from dust and chips.
Tool type: HSK-A63 DIN 69893
Max tool diameter with adjacent pockets occupied: 90 mm
Max tool length: 300 mm
Max tool weight: 10 kg
SCALE PRESSURIZATION:
Complete pneumatic unit with control module for scale pressurization.
SPRAY-MIST COOLANT FOR TOOLS:
Mist lubrication cooling system. The mist is achieved by mixing air and oil. Controlled via M function. Using spray-mist improves cutting quality, prevents built-up edge, keeps cutting area clean, and acts as a coolant. Extremely useful for improving surface finish quality.
EXTERNAL TOOL COOLING:
Coolant distribution system controlled by CNC with nozzles mounted around the spindle flange, complete with 1200-liter tank for collection and filtration.
Flow rate: 30 l/min, pressure: 4 bar.
REQUIRED CONNECTIONS:
Maximum installed power: 150 kW
Maximum required current: 235 A
Machine complete with:
• Remote Heidenhain HR550 electronic handwheel
• Various tooling included with the machine
• Renishaw probe
• BLUM laser tool presetting
• AUTOCAL automatic head calibration system
• Visormax remote monitoring subscription
• Electrical cabinet air conditioning
• Cooling system for all axes and spindle motor
• No. 2 chip conveyors on both sides of the worktable
• User and maintenance manual and CE conformity declaration
Annonse
Ahaus
939 km
Svingbar bøyemaskin
SchröderMPB 2500/2.5
Ring
Tilstand: klar til bruk (brukt), Byggeår: 2003, Sheet width: 2520 mm
Sheet thickness: 2.50 mm (mild steel)
Sheet thickness (stainless steel): 1.50 mm
Upper beam adjustment: 160 mm
Adjustment speed: 100 mm/sec
Bending beam adjustment: 80.0 mm
Bending speed: approx. 120°/sec
Compressed air: 6.0 bar
Pgjdpfxsxbh Euo Aqten
Working height: 869 mm
Control: POS 2000
Total power requirement: 7.2 kW
Voltage: 400 V
Weight: 3430 kg
Current new price: ~ €100,000
From a maintenance workshop
With very good equipment (!!)
Features:
- CNC electro-motorized universal folding machine
* High-precision mechanics with advanced control technology
* Suitable for single-part and series production
* Robust high-speed model with rapid axis movements
* Distortion-free welded construction
- Rotatable upper beam / automatic tool change system
* With 2x tool stations (sharp and segmented goose-neck bending rails)
* Reduces setup and idle times
* Avoids time-consuming tool changes and adjustments
- SCHRÖDER CNC control model POS 2000
* Control panel front right (operable with PC mouse)
* Color display
* USB interface
* Automatic cut calculation
* Material and tool library
* Precision bending simulation
* Operating system Windows XP
* Swivel-mounted control, front right
- Servo inverter-controlled drives
* For bending/upper beam & electric back gauge
- CNC motorized lower beam adjustment
- CNC electro-motorized back gauge
* Travel speed 300 mm/sec
- With rear sheet support table, including ball rollers
- 1x mobile double foot switch
- Operating manual (PDF)
Annonse
Iszkaszentgyörgy
1 604 km
Panelsag
MayerKA80
Ring
Tilstand: ny, Byggeår: 2021, Funksjonalitet: fullt funksjonell, Kappa automatic 80 utmerker seg med den kraftigste sagingen i sin klasse. Denne modellen skiller seg ut med en massiv trykkbjelke, materialskyver i stål samt en slitesterk og høykvalitets maskinkonstruksjon som tydelig skiller seg fra konkurrentene. High-end snittflater, maksimal presisjon og høyeste repeterbarhet er resultatet av denne filosofien. Ved utviklingen av den nye sagvognen til kappa automatic ble kutteretning mot anlegget valgt. Det nyutviklede betjeningspanelet med 24"-skjerm, kutteretning mot anlegget og et sagbladsoverheng på 77 mm er standardutstyr på denne maskinen. Ergonomisk betjeningspanel med 24"-skjerm. På den nye sagvognen går snittet mot anlegget. Jevn og stillegående gange på vognen med en matehastighet på opptil 100 m/min.
Pgsdpfxsy Nc Tle Aqton
Annonse
Gemmingen
1 261 km
Hjullaster
LIEBHERRl 538 kein 524 542 546 sehr schöne Maschine
Ring
Tilstand: brukt, Byggeår: 2016, Utstyr: firehjulsdrift, Liebherr L 538 Z 2plus1
Top condition, original paint
Year of manufacture: 2016
VIN: VATZ1559KZB044515
Operating hours: 14,665
Machine handover on 19.01.2017
All servicing carried out by Liebherr and fully documented. Last service by Liebherr on 20.06.2024 at 14,138 hours.
Pgjdpfeyqn Hrox Aqtsn
4-cylinder inline engine, water-cooled with turbocharging
Emission stage IV, 155 hp
Hydrostatic drive with 3-speed gearbox. Speed reduced to 20 km/h, 40 km/h possible (currently 36 km/h).
Air conditioning!
* Automatic central lubrication system – Liebherr factory installation
* Rear area monitoring with camera (functionality not tested!)
* Ride control (boom suspension)
* Lamp brackets in steel instead of plastic
* Fuel pre-filter
* Access aid for easier cleaning of the front windscreen
* Hinged window in driver's door
* Premium display with touchscreen
* "Comfort" driver's seat with pneumatic suspension (with seat heating)
* Liebherr operating lever (joystick)
* Adjustable steering column
* 4 work lights on the front of the cab roof
* 2 work lights on the rear of the cab roof
* Automatic bucket return
* Reversible fan (reverse fan) for cleaning the cooling package
* Fluff screen in front of the radiator package prevents contamination of the coolers
* Pre-separator for engine intake air (TOP-AIR)
* Preparation for beacon (warning light) at rear center of cab
* Acoustic reversing warning system (reverse beeper)
* Radio pre-installation
* Street approval possible!!
Tyres: 20.5 x 25 L3 Front axle: 2 x 30%
Tyres: 20.5 x 25 L3 Rear axle: 2 x 30%
Net price with fixed-mount 2.5 m³ bucket: €44,900
Optional equipment at additional cost:
- Hydraulic quick coupler €3,550
- High volume bucket 4 m³ €4,500
- Pallet forks 5 or 8 t from €2,190
Optionally available with scale, e.g. used Pfreundt WK50–WK60 from €3,900
All prices plus 19% VAT or for export.
Sale only to commercial customers or for export. Sold as-is, as viewed. No warranty or guarantee. Indicated kilometer and operating hour readings are taken from the meter – accuracy cannot be guaranteed!
Subject to prior sale. This vehicle description does not constitute a binding offer and is not to be considered guaranteed characteristics. The description and details serve only as general identification of the machine and do not represent a warranty in the legal sense. Details may not be complete. Stated information/descriptions and images are non-binding and do not constitute guaranteed characteristics.
Only the stipulations in the order confirmation and invoice are valid. The seller assumes no liability or warranty. This advertisement may contain errors in typing or data transmission. The seller has not examined the machine. Equipment must be checked separately where applicable.
Annonse
Mouvaux
1 136 km
Kjøttforedlingsmaskin
AERALigne de trancheur pour cordons bleus
Ring
Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, The AERA cordon bleu slicer optimizes industrial food preparation with maximum efficiency. Designed for fast and precise slicing, it employs multiple band slicers to ensure consistent results. Additionally, the filling conveyor pre-processes products before slicing, while the cordon bleu folder shapes each product perfectly. Featuring a pneumatic control system and belt scrapers, the slicer delivers high performance. Moreover, the titanium cutting carriage, equipped with automatic lubrication, minimizes maintenance requirements. In summary, the AERA model enhances both the quality and efficiency of production while meeting industrial standards.
COMPOSITION:
FILLING CONVEYOR
Overall dimensions (L x W x H): 6400 x 1000 x 970 mm
Weight: 970 kg
Slideway height: 960 +/- 50 mm
Stainless steel tubular frame and adjustable feet
600 mm wide synchronous belt
Lyre-type belt return
Pneumatically operated quick belt release system
Servo-driven control with position register management
Belt scrapers
SLICER
Overall dimensions (L x W x H): 1880 x 1030 x 2460 mm
Weight: 1000 kg
20 mm thick stainless steel frame
Stainless steel panel cowlings with magnetic safety sensor and pneumatic interlock during operation
Configuration:
The slicer is fitted with 4 feeders consisting of:
- 4 synchronous pin conveyor belts controlled by a servomotor
- 4 chutes determined according to the products to be sliced
- Pneumatic release control for unloading chutes relative to the belts for loading
CUTTING CARRIAGE
The cut is performed by a bandsaw blade mounted on two titanium wheels (Ø 200 mm) set on a titanium crosspiece
The cutting carriage is guided by stainless steel "Hepco" rails and rollers
The cutting movement is powered by a Sew Usocome servo gearbox, a traversing shaft, and two connecting-rod-and-crank assemblies
The wheels are driven by a Sew Usocome motor-gearbox with a drive shaft and an expanding pulley that maintains constant tension on the V-belt
A torque-limited tensioning system ensures proper blade tension
Podpfxeu Ivcij Aqtogn
The bandsaw blade is lubricated by an automatic sprayer supplied by a low-pressure water network
DISCHARGE CONVEYOR:
Slices are received and distributed by a two-ply polyurethane belt conveyor motorized by a Sew Usocome servo gearbox
Products are discharged using a 16 mm diameter blade at the end of the conveyor
Quick-release belt system
Perforated bed for easy cleaning
Entirely stainless steel construction
Annonse
Niederlangen
850 km
Søylebor
BERNARDOGB 30 Vario
Ring
Tilstand: ny, Bore capacity in steel (diameter): 32.0 mm
Thread cutting: M22
Quill stroke: 125 mm
Throat: 280 mm
Morse taper: MT3
Table: 450 x 380 mm / 14 mm T-slot
Spindle speed: 70 - 3,500 rpm
Feed rate: 0.1 / 0.2 / 0.3 mm/rev
Column diameter: 110 mm
Weight: 320 kg
Dimensions (LxWxH): 500x800x2,100 mm
Total power requirement: 1.1 / 2.2 kW
Features:
Infinitely variable speed control, ideal for adjusting the desired cutting speed. Automatic tool ejector and thread cutting device included as standard.
Psdexabiqepfx Aqtogn
Electromechanical feed, adjustable from 0.1 - 0.3 mm/rev
Heavy-duty cast iron table with swivelling and rotatable support surface
T-slots in the machine base enable clamping of large workpieces.
Guaranteed concentricity = 0.02 mm, measured in the quill
Hardened and ground gears ensure smooth running
Adjustable drilling depth stop with easy-to-read scale
Scope of delivery:
- MT 3 / B 16 drill chuck arbor
- Reducing sleeve MT 3 / 2, MT 3 / 1
- Key-type drill chuck 1 - 13 mm / B 16
- Coolant system
- Electromagnetic spindle feed
- Thread cutting device
- Automatic tool ejector
- LED machine light
- Digital speed display
- First fill with Shell Tellus 46
- Height-adjustable safety cover
Annonse
Neuss
1 041 km
Generator
BauerGFS-50 - Generator 62,5 kVA
Ring
Tilstand: ny, Byggeår: 2025, Funksjonalitet: fullt funksjonell, totalvekt: 1 000 kg, drivstofftype: diesel, farge: rød, effekt: 50 kW (67,98 hk), total lengde: 2 270 mm, total bredde: 880 mm, total høyde: 1 120 mm, Varig ytelse: 50 kW / 62,5 kVA
Maksimal ytelse: ca. 55 kW
Spenning: 230 / 400 V
Frekvens: 50 Hz
Turtall: 1500 o/min
Effektfaktor: cos φ ≈ 0,8
Motor: 4-sylindret diesel
Slagvolum: ca. 4,15 liter
Kjøling: vannkjølt
Generator: børsteløs, AVR (automatisk spenningsregulering)
Enheten er utstyrt med ATS (Automatic Transfer Switch)
Pgedpfx Aqoy Dtwkstsn
CE-merking: JA
Ta gjerne kontakt for ytterligere spørsmål.
Annonse
Tyskland
1 043 km
FORSKYTTE PLATET SKRIVEMASKIN
KomoriLithrone L 420
Ring
Tilstand: svært god (brukt), Byggeår: 2009, Funksjonalitet: fullt funksjonell, PDC-LITE II: Måle- og reguleringsteknikk
PQC: Kontroll- og styringsteknikk
KPC: Halvautomatisk plateveksler
Pgedpfsyubxisx Aqtsn
AMR (Automatic-Make-Ready): Automatisk klargjøring
Komorimatic fukteverk
Technotrans kjøling og sirkulasjon
Gummidukvasker
Trykksylinder-vasker
Pulveranlegg
Trykkmaterialtykkelse: 0,6 mm
Tellerstand: 22
Annonse
Mouvaux
1 136 km
Kjøttforedlingsmaskin
TermomecROT90
Ring
Tilstand: klar til bruk (brukt), Funksjonalitet: fullt funksjonell, The Termomec ROT90 tray sealer stands out as a key asset for agri-food industry professionals seeking to automate the dosing and placement of their containers. This dosing carousel guarantees exceptional process smoothness while maintaining the precision required for filling a wide variety of product types. In addition, its automatic de-nesting system makes separating and feeding pots much easier, resulting in significant time savings during the loading phase. As such, the machine can be quickly adapted to various container formats without sacrificing your production throughput.
Furthermore, this versatile solution incorporates a sealing (lidding) function, enhancing food safety and protecting products from external contamination. Its ergonomic design minimizes operator fatigue, thanks to intuitive controls that improve ease of use. At the same time, the robust stainless steel frame ensures long-term durability in demanding production environments, maintaining the integrity of each mechanical component.
The Termomec ROT90 also integrates seamlessly into different packaging lines, featuring well-designed interfaces to communicate easily with existing machines. This lets you optimize your entire process and meet increasingly strict quality and reliability standards. Ultimately, this advanced design boosts your competitiveness by reducing downtime and ensuring strict compliance with hygiene regulations.
Contact us today to learn how the Termomec ROT90 can transform your operations and position your business at the forefront of food industry innovation.
Process steps:
1. The automatic de-nesting system separates and feeds empty pots, greatly simplifying setup.
2. The dosing carousel dispenses product with high precision into each container, ensuring accurate quantities to match your required specifications.
Pgedpfx Aqov Uwyxetsn
3. Finally, the lidding stage hermetically seals the pots, preventing contamination and maintaining product freshness throughout delivery.
Technical specifications:
- Year of manufacture: 2017, offering recent technology
- Voltage: 400 V, 50 Hz, compliant with standard industrial power supply
- Weight: approx. 1,500 kg, ensuring stability
- Dosing carousel: continuous and precise filling
- Automatic pot de-nester: fast automation for various container shapes and sizes
Annonse
Ottersweier
1 313 km
Flatbed LED UV-skriver
MutohXpertJet 1462UF
Ring
Tilstand: helrenovert (brukt), Funksjonalitet: fullt funksjonell, XpertJet 1462UF, flatbed LED UV printer, refurbished, including on-site installation
UV-LED flatbed printer with moving gantry beam system and a table size of 1420 mm x 700 mm. Equipped with two staggered print heads for independent CMYK and white/varnish printing, as well as two 4-inch wide UV curing lamps, enabling flawless 2-layer printing without loss of speed.
The XPJ-1462UF covers a wide range of applications, including 2.5D direct printing, industrial printing, packaging printing, awards, as well as sign and display printing, including Braille. An interesting all-in-one solution for screen printers looking to expand their workflow with digital direct-to-object printing, and for industrial printers aiming to enhance their services with increased versatility and color.
Benefits:
- 6 colors: C, M, Y, K, White, and Varnish
- Four-zone magnetic vacuum bed supporting weights up to 50 kg/m²
Pgjdpfx Aqoy I Ud Hjton
- Can print on objects up to 150 mm thick
- Automated media height and obstacle detection
- Two piezo drop-on-demand inkjet print heads, staggered for fast multi-layer printing
- Automated nozzle check unit reduces print loss and downtime
- Next-generation UV-LED ink – free from SVHC and CMR, stretchable, scratch-resistant, and compatible with many substrates
- Original VerteLith RIP software includes extensive features for UV printing: multi-page PDF support for variable data, fixture attachments, embossing print presets, and a texture library with 100 different texture patterns.
Print Head Technology: 2x Epson (staggered)
Two piezo drop-on-demand print heads,
staggered configuration for fast multi-layer printing.
Print resolution: up to 1,440 dpi
Max. print area: 1,420 x 700 x 150 mm
Four-zone magnetic vacuum bed – supports up to 50 kg/m²
Height adjustment: Automatic media thickness detection
2 x 4'' multi-segment UV-LED curing lamps
Mutoh next-generation UV-LED ink US61/UH21 – free from SVHC and CMR, stretchable, scratch-resistant, and compatible with many media types
Interface: GB-Ethernet (1000BASE-T)
Dimensions (L x W x H):
Printing system: 2,770 x 1,459 x 1,569 mm
Weight: approx. 500 kg
Scope of delivery:
XPJ-1462UF
User manual
RIP software VerteLith™
Start-up cleaning (8 cartridges x 220ml)
Ink adapters (6 units per set)
Tower light, foot pedal, cables
Annonse
Lambsborn
1 238 km
NY|med avsug
Holzkraftstartech cn k Lagerausstattung
Ring
Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, CNC milling machine startech cn k warehouse equipment BRAND NEW MACHINE
Compact 3-axis machining center for milling and engraving, suitable for tool diameters up to max. 60 mm with shank diameters up to max. 16 mm.
Spindle drive via powerful 2.4 kW motor.
Intuitive machine software for PC with open interface for various CAD/CAM programs included in the scope of delivery.
Technical specifications:
Work table: 760 x 1170 mm
Spindle speed: 24,000 rpm
Max. workpiece dimensions X: 915 mm
Max. workpiece dimensions Y: 610 mm
Max. workpiece dimensions Z: 176 mm
Number of drilling spindles: 1
Max. tool diameter: 60 mm
Max. travel speed X-axis: 5 m/min
Max. travel speed Y-axis: 5 m/min
Max. travel speed Z-axis: 2.5 m/min
Nominal external suction connection: 40 mm
Including 5 pneumatic suction cups for positioning on the work table—simple workpiece fixturing.
Pneumatic working pressure: 6.5 bar
Compressed air requirement: 120 l/min
Includes wetCAT 141 RS-TOOL M-Class wet & dry vacuum CLEANCRAFT for extracting dust from e.g. hardwood, stucco, paint, concrete.
Automatic filter cleaning
Airflow: 4560 l/min
Dust class: M
Container volume: 41 l
Hose diameter: 33 mm
Sound pressure level: 74 dB(A)
Power consumption: 1.1 kW
Pgedpfx Aqeyx Dzvotsn
Max. device socket connection: 2.4 kW
Connection voltage: 220 – 240 V
Network frequency: 50 / 60 Hz
List price (MSRP): €14,789.00
Available at short notice
Shipping available at extra cost
Annonse
Borken
964 km
Temperatursjokktestkammer
especTSD-100
Ring
Tilstand: brukt, Espec
Type: TSD-100
100 liters useful volume for larger test specimens up to 30 kg.
Complies with all major international standards.
Water-cooled
Temperature range, hot chamber: +60 °C to +200 °C
Temperature range, cold chamber: -70 °C to 0 °C
Test chamber dimensions: 710 x 345 x 410 mm (W x H x D)
External dimensions: 1100 x 1885 x 1965 mm (W x H x D)
Water-cooled refrigeration unit
Program control via touch panel
Automatic defrost
Pedpexugq Aefx Aqtegn
Overtemperature protection
Operating hour meter
Mobile version
2 stainless steel product baskets
Cable port Ø 100 mm
Refrigerant: 3 kg R404A, 1 kg R23
Power supply: 400V 3Ph 50Hz
Max. current consumption: 32A
Condition: used
Weight: 1100 kg
For your safety as a buyer, please note the following information!
The following measures are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If required, refilling with legally compliant refrigerant
3. Leakage test with certificate
4. After successful inspection, the chambers undergo a documented test run.
Condition: used
Scope of delivery: (See picture)
(Subject to alterations and errors in technical data and specifications!)
For further questions, please feel free to contact us by phone.
Annonse
Cerea
1 711 km
SEGA C40 PRO 3 Akser
MACO2L & SICARSEGA C40 PRO 3 ASSI
Ring
Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, Utstyr: CE-merking, dokumentasjon / manual, SEGA C40 PRO – 3 AXIS SICAR is a panel saw designed for true professionals who refuse to compromise between precision, speed, and control. This is a machine that turns cutting into a smooth, optimized, industrial process.
Its operational core is the intuitive and responsive 10” capacitive touchscreen, which communicates seamlessly with integrated software for layout optimization and automatic cutting. In other words: less waste, higher output, and data-driven decisions made directly at the machine.
The servo-driven parallel fence carriage ensures fast movements and millimeter-precise positioning, even during repetitive operations. Here, precision is not an option—it’s the standard.
Pjdpsuzxk Aofx Aqtsgn
The PLC-programmable parallel fence, combined with a large-size visual-scale guide, makes positioning simple, stable, and immediate. Fewer human errors, more operational control.
SEGA C40 PRO – 3 AXIS is more than just a panel saw: it’s an intelligent work platform, designed to optimize time, improve quality, and take your workshop to a new level of efficiency.
Compliant with the latest CE regulations.
Annonse
Freudenberg
1 065 km
4-akset CNC portalfräsemaskin
WALDRICH COBURG17-10 -275 CNC x 4.000 (3P)
Ring
Tilstand: nesten som ny (brukt), Byggeår: 1988, For sale is a high-performance 4-axis CNC gantry milling machine WALDRICH COBURG, model 17 – 10 FP, ideally suited for machining large and heavy workpieces.
Pedpfx Asdu Hg Hsqtogn
The machine impresses with its solid construction, high power, and comprehensive features. Additionally, it offers excellent potential for modernization / CNC retrofit according to customer specifications.
⚠️ Important Note
The machine is offered without electrical equipment and without CNC control and is ideally suited as a retrofit project.
⚙️ Highlights:
✅ 4-axis CNC gantry milling machine with adjustable crossbeam
✅ Powerful main drive 75 kW
✅ Speed range up to 2,000 rpm with high torque
✅ Automatic pallet changer (3 pallets)
✅ Hydrostatic guides in X & Y axes
✅ Internal spindle cooling
✅ Ideal for heavy-duty cutting & large components
📊 Technical Data:
🔹 Clearance between columns: 3,100 mm
🔹 Clamping area/pallets: 2,750 x 4,000 mm (extendable)
🔹 Number of pallets: 3 (automatic)
🔹 Max. workpiece weight per pallet: 40 t
🔹 Travel X-axis: 5,000 mm
🔹 Travel Y-axis: 5,440 mm
🔹 Travel Z-axis: 1,000 mm
🔹 Travel W-axis (crossbeam): 2,500 mm
🔹 Spindle power: 75 kW
🧰 Equipment:
✔️ Automatic pallet changer (3 stations)
✔️ Angle heads (RAA) incl. ISO 60 & ISO 50
✔️ Special angle head
✔️ Spindle extension (650 mm)
✔️ Automatic head changing system
📍 Location: Germany
👁️ Inspection possible at any time by arrangement
📦 Available at short notice
📩 Contact us now for further information, photos or an individual offer!
Annonse
Ahaus
939 km
Søylebor
ALZMETALLALZSTAR 40 iTRONIC-V
Ring
Tilstand: ny, Bore capacity in steel (diameter): 40.0 mm
Arm length: 293 mm
Quill stroke: 120 mm
Morse taper: 3 MT
Table size: 515 x 360 mm
Spindle speed: 160 - 2,250 rpm
Column diameter: 115 mm
Feed: 0.10 + 0.20 mm/rev
T-slots: 2 x 14 x 224 mm
Distance spindle/table: 117 / 701 mm
Motor power: 1.45 / 1.90 kW
Pgjdpfexab Rhox Aqten
Weight: 285 kg
Machine height: 1,840 mm
NEW ALZMETALL MODEL SERIES
7" TFT-LCD display with touch function:
* Preset spindle speed
* Actual speed display
* Integrated drilling depth display
* Touch zero point transfer
* Virtual drilling depth scale on display
* Machine status indications and warnings on display
* Service information
* Selectable operator language: DE/EN/FR/ES/IT/NL/RU
Features:
- Infinitely variable speed adjustment via control lever
- Automatic spindle feed with overload protection
- Spindle guard with electrical interlock
- Three separate push-buttons for clockwise, counterclockwise, and stop
- Mushroom-head emergency stop button (latching)
- Main switch, lockable
- Clockwise/counterclockwise operation via contactor control
- Control voltage: 24 V
- Protection class: IP 54
- Paint: DD textured finish, Signal White RAL 9003 PANTONE 7545c, black
Including special accessories:
- 25. Coolant system B.
Annonse
Ahaus
939 km
Søylebor
ALZMETALLAX 4 iTRONIC
Ring
Tilstand: ny, Bore capacity in steel (diameter): 55.0 mm
Throat depth: 300 mm
Drilling stroke: 140 mm
Morse taper: 4 MT
Table: 615 x 430 mm
Spindle speed: 70 - 1200 rpm
Column diameter: 145 mm
Thread M 30 ST60
Thread M 36 GG20
Feed: 0.10 + 0.30 mm/rev
Distance spindle / table: 150 / 735 mm
Motor power: 1.8 / 2.9 kW
Weight: 380 kg
Machine height: 1850 mm
NEW ALZMETALL MODEL RANGE
7" TFT LCD display with touch function:
* Spindle speed setpoint
* Actual rpm display
* Integrated drilling depth indicator
* Touch zero point function
* Virtual depth scale on display
* Machine status indicators and warning notifications on display
* Service information
* Selectable operator language: DE/EN/FR/ES/IT/NL/RU
Equipment:
- Thread-cutting device
* For tapping with stop
Pedpfsxabn Tex Aqtogn
* Max. 6 threads/min (thread-cutting capacity depends on spindle speed)
* Thread depth adjustable via depth stop
* In the TFT LCD display (3 tools)
- Automatic spindle feed with overload protection
- Infinitely variable speed adjustment via control lever
- Spindle guard with electrical safety interlock
- Three separate pushbuttons for clockwise - counterclockwise - stop
- Mushroom-head emergency stop button (latching)
- Main switch, lockable
- Clockwise/counterclockwise via contactor control
- Control voltage 24 volts
- Protection class IP 54
- Finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black
- Initial machine oil filling: oil bottle supplied loose
Including special accessories:
- 12. LED machine lamp
- 24. Coolant system A* integrated in the machine base
Tillitsmerke
Autoriserte forhandlere sertifisert av Machineseeker

Annonse
Ahaus
939 km
Søylebor
BERNARDOSB 40 Profi
Ring
Tilstand: ny, Bore capacity in steel (diameter): 40.0 mm
Throat depth: 320 mm
Quill stroke: 160 mm
Morse taper: 4 MT
Pgjdpsxaazrofx Aqten
Table: 505 x 425 mm
Tiltable +/- 50 degrees
T-slots: 14.0 mm
Spindle speed: 90 - 1455 rpm
Quill feed: 0.1/0.2/0.3 mm/rev
Column diameter: 120 mm
Total power requirement: 1.0 / 1.5 kW
Machine weight: approx. 380 kg
Dimensions (L x W x H): 500 x 930 x 1870 mm
Features
- Variable speed drive for precise spindle speed adjustment
- Quill movement selectable manually or via mechanical feed
- Easy tool change thanks to automatic tool ejector
- Set spindle speed quickly and easily readable via digital display
- Heavy-duty, tiltable cast iron table with T-slots and coolant channel
- Coolant system and lighting included in delivery
- Adjustable drilling depth stop, drilling depth readable via scale
- Forward/reverse rotation for thread cutting
Scope of delivery
- Drill chuck arbor MT 4 / B 16
- Coolant device
- Digital speed display
- Quick-release drill chuck 1 - 16 mm / B 16
- Reducing sleeves MT 4 / 3, MT 4 / 2, MT 3 / 1
- LED machine light
- Automatic tool ejector
- Height-adjustable safety guard
Annonse
Ahaus
939 km
Søylebor
BERNARDOGB 35 Vario
Ring
Tilstand: ny, Bore capacity in steel (diameter): 35.0 mm
Bore capacity in cast iron: 40.0 mm
Throat depth: 320 mm
Tapping capacity M24 in steel
Morse taper: 4 MT
Quill stroke: 160 mm
Speed range: 65 - 3250 rpm
Table size: 500 x 420 mm
Throat depth: 320 mm
Weight: 375 kg
Dimensions (L-W-H): 600 x 870 x 2,170 mm
Equipment:
- Infinitely variable speed control, ideal for setting the desired cutting speed
- Automatic tool ejector and standard tapping device
- Electromechanical feed, adjustable from 0.1 - 0.3 mm/rev.
- Heavy-duty grey cast iron table with rotatable and tiltable support surface
- T-slots in base allow clamping of tall workpieces
- Guaranteed concentricity ≤ 0.02 mm, measured in the quill
- Hardened and ground gears ensure smooth running
- Adjustable drilling depth stop with easy-to-read scale
Pjdpfx Aexaabrsqtjgn
Scope of delivery:
- 1–13 mm keyed drill chuck / B16
- Drill chuck arbor MT4 / B16
- Reducing sleeves MT4/3, MT4/2
- Coolant system
- Tapping device
- Electromagnetic spindle feed
- Automatic tool ejector
- LED machine lamp
- Initial filling with Shell Tellus 46
- Digital speed display
- Height-adjustable safety guard
Annonse
Langenhagen
895 km
Lastebil med arbeidsplattform
MultitelMZ 250
Ring
Tilstand: ny, Funksjonalitet: fullt funksjonell, drivstofftype: diesel, totalvekt: 3 500 kg, farge: hvit, girtype: mekanisk, Byggeår: 2026, Transporter lift Multitel MZ 250 on IVECO chassis
Stock equipment, year of manufacture 2025, in like-new condition
Max. working height: 25.10 m
Max. lateral outreach: 10.35 m (250 kg), 14.35 m (80 kg)
Transport dimensions (L/W/H): 6.33 / 2.25 / 2.90 m
Max. platform capacity: 250 kg
Unladen weight: 3,500 kg
Chassis: IVECO 35S14H MY 2024
Year: 2025, EURO 6e, radio, M+S tyres
Colour: white
Features:
- Articulated telescopic system with aluminium boom
- Variable hydraulic outriggers
- Fully proportional electrohydraulic controls
- Platform dimensions: 1.40 x 0.70 x 1.10 m (250 kg)
- Slewing range: +/- 450°
- Basket rotation: +/- 90°
- One-touch return to transport position (home function)
- One-touch turret centring
Pgedpfx Aoxhfwzeqtjn
- One-touch automatic leveling
- Movable basket arm
- Basket and ground controls
- Emergency hand pump
- 5 years telematics
Special features: 230V socket in basket, warning beacon on slewing turret, 200 mm aluminium side wall, outrigger pads
Available from stock in Langenhagen
All information regarding the offered vehicle is without guarantee. Subject to errors, omissions, and prior sale.
Leasing offers available via partner companies.
Annonse
Burghaslach
1 202 km
Snekkermaskin
HundeggerK2i-450 (UF4)
Ring
Tilstand: god (brukt), Byggeår: 2011, Full-automatic timber infeed with feed roller conveyor
Extension of cross infeed conveyor and feed roller conveyor for timber lengths up to 13 m
Infeed and loading cross conveyor
Under-table swing cross-cut saw
Universal 4-axis milling unit (UF4)
Combined support for vertically operating tools
Drilling unit 2.2 kW
Combined support for horizontally operating tools
Drilling unit 2.2 kW
Longitudinal and cross slot milling cutter
Rear marking device (stop side)
Fully automatic beam turning station – hydraulic
Transport and positioning device "two-hand system"
Electronic control with EKP software
Roller conveyor for timber outfeed incl. extension (non-driven)
Pgsdpewuppwsfx Aqtjn
Component ejector
5-arm timber stacking device
Safety devices and guarding
Vi gjør det enklere for deg å søke: "automatica dvpgp"
Du får nye tilbud på e-post umiddelbart og gratis.
Du kan når som helst enkelt avslutte søkeoppdraget.

Få informasjon nå
+44 20 806 810 84
+44 20 806 810 84
Legg inn annonse nå
*per annonse/måned















































































































































































