Kjøp brukt Sheeter (344)

Tilstand: svært god (brukt), Rondo Starline er en høytytende linje for bakervarer. Ca. 13 meter lang. Linjen består av en kalibrator, strimmelkuttere, sprayenhet og horisontal giljotinenhet. Kan brukes for bearbeiding av ulike deigtyper, inkludert butterdeig, wienerdeig, gjærdeig, mørdeig og tynne deiger til produkter som pizza eller donuts. Kljdpfx Abex Squcs Dol

Byggeår: 2025, Tilstand: som ny (utstillingsmaskin), Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: S25Synthesi01, Stretch wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs, in several steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage up/down speed Buzzer at wrap start and cycle end stop Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push button for machine power-on as well as start, stop & reset function, according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Stepless turntable speed adjustment 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 rotations) F06 – Number of wraps at pallet top (1–10 rotations) F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for base & top wraps / up & down movement independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrap (upwards/downwards) F01-2 – Simple wrap (upwards or downwards only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with deactivation of the photoelectric sensor) F22/F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for corner protection placement F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button Optional features available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Kodpfxex Ta R Ns Ab Djll Ramp Mounting frame Photoelectric sensor for black products Cutting device, etc. Additional units available from Ludwigsburg stock. Images may show options subject to a surcharge. Picture similar

Tilstand: nesten som ny (brukt), Byggeår: 2021, Funksjonalitet: fullt funksjonell, Digital etikettetterbehandler Valloy Duoblade WX I med fire skjærehoder Maskin kun brukt til demonstrasjonsformål. Hovedteknisk informasjon: Mediabredde: 100–350 mm. Antall skjærehoder: 4 stk. Automatisk hodevalg og -justering i henhold til skjæreinfo Skjærehastighet opp til 9 m/min. Maksimal etikettstørrelse: 350 x 600 mm. Skjærenøyaktighet: +/-0,2 mm. Automatisk regulering av mediespenning med magnetpulverbremse CCD-kamera for lesing av registermerker og jobbnr. Laminering Klsdpoxv Adzsfx Ab Djl Web guide-system Sheeter-alternativ

Tilstand: god (brukt), 144 BRUKT deigvals, rundformer, forlengermaskin, baguette-maskin Seewer Rondo. UTVENDIGE MÅL (i cm): - høyde: 170, - bredde: 115, - lengde: 215, - vinge 1x: 108/62, - vinge 1x: 75/62, - vinge 1x: 114/62. Utstyret er klart for visning på vårt lager (36-068 Bachórz, Polen). Tilgjengelige betalingsalternativer: overhaling / transport / montering / igangkjøring. Ksdpfjxdkbqsx Ab Doll Oppgitt pris er netto. VI SNAKKER ENGELSK, TYSK, FRANSK, RUSSISK, UKRAINSK.

Tilstand: brukt, Byggeår: 1985, Plate thickness: 2.25 mm Total power requirement: 1.1 kW Sheet length: 2025 mm Motorized Swing Bending Machine: Kramer Mod. Amaut II 2000 2025 mm x 2.25 mm Working length: 2025 mm Material thickness: 2.25 mm Min. bending width: 5 x s Min. internal radius: 1.5 – 2 x s Adjustability of lower and bending beam: 90 mm For round bending: 90 mm Maximum working position of the upper beam: 190 mm Max. opening width of the upper beam: 290 mm Cycle time per operation: 7.0 sec. Dimensions (approx.): 3000 x 1000 x 1650 mm Features: - Control console on right side of the machine - Simple bending angle adjustment at the control panel - Selectable switch between automatic, semi-automatic, or jog mode - Potentiometer for angle setting Kedsvaatfopfx Ab Dsll - Foot switch Used, in good condition

Tilstand: brukt, Plate thickness: 4 mm Number of strokes: 60 Kedpsrmbdcofx Ab Djll Weight approx.: 3800 kg Dimensions (LxWxH): 3560 x 1250 x 1300 mm Technical details: Type: KS 254 Sheet thickness: 4 mm Power: 5 HP Weight: 3800 kg Strokes per minute: 60

Tilstand: brukt, Byggeår: 2000, Plate length: 4,100 mm Plate thickness: 12 mm Total power requirement: 30 kW Weight approx.: 16,300 kg Dimensions (LxWxH): 5,350 x 2,250 x 2,250 mm Back gauge: 1,000 mm New price: approx. 100,000 EUR Condition: Used, good condition Equipment: - Swing-beam shear design - NC pre-selection control ELGO for back gauge Klodpjwiatvofx Ab Del - Motorized back gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel on swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Central manual cutting gap adjustment Accessories: - 1 side gauge 1,500 mm with scale, T-slot and cam stop - 2 sheet support arms 1,000 mm with T-slot - Simple blade replacement and resharpening - Adjustable cutting length for economical processing - Bottom blade with 4 cutting edges (reversible) - Top blade with 2 cutting edges (reversible) Further details: - Operating manual in GERMAN

Tilstand: brukt, Byggeår: 1984, Plate thickness: 3 mm Total power requirement: 2.2 kW Klodpev H Hfnofx Ab Del Throat depth: 200 mm Motor: 2.2 kW Sheet length: 1100 mm Stroke: 56 mm Motorized guillotine shear Hera HSS III 1100 mm x 3 mm Space requirement approx. WxDxH 2000x1500x1800 mm The machine is used but in good condition.

Tilstand: svært god (brukt), Byggeår: 2006, 900 BRUKT tørkeaggregat Kaeser TCH 22. TEKNISKE DATA: - Maksimalt trykk: 18 bar - Arbeidstemperatur: 3–45°C - Strømforsyning: 230V/1/50Hz - Kjølemedium: R 134a - Dimensjoner: 879x427x608 mm Enheten er klar for inspeksjon og befinner seg på vårt lager (36-068 Bachórz, Polen). Tilgjengelige tilleggstjenester mot betaling: transport Oppgitt pris er netto pris per enhet. VI SNAKKER ENGELSK, TYSK, FRANSK, RUSSISK OG UKRAINSK. Klodpfxovpg Dvs Ab Del I vårt tilbud finner du bakerovner, vognovner, etasjeovner, konditorovner, butikkovner, bakerimaskiner, komplette brødanlegg, småbrødlinjer, kakelinjer, croissantlinjer, baguettmaskiner, eltemaskiner, miksere, kjevlemaskiner og croissantmaskiner. Se alle våre annonser.

Tilstand: svært god (brukt), Byggeår: 2013, Modula Lift ML50D Lagerlift The Modula systems are automated vertical storage systems based on the concept of vertical storage and space savings. They allow you to store all types of materials safely, cleanly, and efficiently, reducing floor space requirements by up to 90%. Modula systems are the result of over 30 years’ experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during tray insertion • Dynamic carrier slot allocation within the unit based on stored goods’ height • Unit frame constructed from galvanized steel profiles • Vertical drive via Eagle steel-reinforced toothed belts Kjdpfx Aex Ezxleb Doll • Extractor guide system with 6 HDPE rollers per side • Management of trays with differentiated loading capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing a storage area of 3.53 m² per tray. With 58 trays in total, the overall storage area is 204.74 m². The load capacity per tray is 500 kg, equating to a total capacity of 29,000 kg across all 58 trays. Manufacturer: Modula Year of manufacture: 2013 Model: Modula Lift ML 50D Height: 7,350 mm Tray width: 4,100 mm Tray depth: 857 mm Tray height: 120 mm Net tray load capacity: 500 kg Gross total load capacity: 70,000 kg Machine dimensions (internal access, W x D): 4,517 x 3,165 mm Machine dimensions (external access, W x D): 4,517 x 4,058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: up to 120 trays/hour (depending on configuration) Vertical pitch increments: 200 mm Storage grid: 25 mm Number of trays: 58 Product video Product video 2 For data sheet, see the Documents tab. Dismantling and removal by buyer Dismantling by our installation team also possible (€5,000 net) More items – new and used – in our shop! International shipping costs on request!

Tilstand: brukt, Byggeår: 2000, Brukt Rondo-linje. Klodpfx Aex Swucsb Djl

Tilstand: ny, Byggeår: 2025, Condition: new Year of manufacture: 2025 Stock number: 080112 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €86,376 Leasing rate: €1,438.29 Quantity in stock: 1 Special price: €76,100 Pressing force: 175 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth: 450 mm Open height: 530 mm Drive system: hydraulic Rapid traverse Y axis: 160 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 100 mm/s Back gauge speed X axis: 500 mm/s Back gauge speed R axis: 350 mm/s Back gauge stroke R axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 10,900 kg 4 axes (Y1, Y2, X and R axis) CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touch-screen operation (easy contour drawing with your finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of blank length for sheet metal cutting - Graphic product and tool storage - Correction capability - USB ports for backup and program transfer - PC software allows programs to be created on a PC and then transferred to the machine via USB Servo-driven back gauge on linear guides and ball screws Back gauge fingers on dual linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and goosenecked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Increased stroke, open height, and throat depth - Higher approach and return speed of upper beam - Higher back gauge speed - Back gauge fingers on double rather than single linear guides - More options available, e.g. additional back gauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls … Klsdpfowiranjx Ab Dol OPTIONS (DELIVERY TIME FOR THESE OPTIONS APPROX. 10 WEEKS): Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamping lever for top tool

Byggeår: 2023, Tilstand: ny, HYDRAULIC GUILLOTINE SHEAR MVD MOD iSHEAR B 06-4000 COMPLETE WITH REAR PNEUMATIC SUPPORT. CNC ESA S 625 TECHNICAL SPECIFICATIONS Cutting capacity for material 450N/mm2: 6 mm Cutting capacity for material 700N/mm2: 4 mm Cutting length: 4100 mm Fixed cutting angle: 1.5° Hold-down cylinders: 18 Strokes per minute: 10 – 14 Throat depth: 250 mm Kodpfofh R Insx Ab Dsll Motor power: 10 kW Metric square with two sheet supports: 1000 mm Backgauge stroke: 1000 mm Approximate weight: 11,000 kg

Tilstand: ny, OMEC Symmetrical 3-Roll Mechanical Plate Rolling Machine with Double Pinch New “CE” Made in Italy WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm Ksdjgyk S Ajpfx Ab Dsll SIDE ROLL DIAMETER: 150 mm MAX. BENDING THICKNESS 1.5 x D: 4 mm MAX. BENDING THICKNESS 3 x D: 4.5 mm MAX. BENDING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 kW WEIGHT: 1700 kg The FX3-3 series distinguishes OMEC’s 3-roll mechanical asymmetric plate rolls with simple, full pinch operation. The side roll (bending roll) is standardly mounted with steel supports and bearings, and externally with bronze slides, ensuring maximum reliability and minimal wear over time. The rotation of the rolls is applied to the upper and lower rolls via a gearbox and self-braking motor, while sheet feeding and clamping also feature top-brand motors and gearboxes. Equipped with hardened rolls, motorized movement and clamping, ready for profile bending roll mounting, and a conical device directly positioned on the upper roll, this machine offers the optimal balance between absolute quality and operator-friendly use for a wide range of cylindrical and conical rolling tasks. As standard, the upper roll opens laterally to remove the rolled shell. MACHINE CONFIGURATION: - UPPER AND LOWER ROLLS ARE MOTORIZED for rotation with equal power. - SIDE ROLL IS MOTORIZED for up/down adjustment. - MOTORIZED SHEET CLAMPING. - DIGITAL POSITION READER for the side roll position. - DIGITAL POSITION READER for sheet clamping. - ROLL HARDENING: HRC 55/60, 2mm depth. - Side roll supports with steel + shielded bearings + external bronze slides. - PREARRANGEMENT FOR INCLINING SIDE ROLL(s) for cone rolling (excluding conical device). - OUTER INCLINATION CONTROL LEVER (right side) for FX3.2/FX3.3 – (right+left) for FX4.1/FX4.2. - PREARRANGEMENT FOR PROFILE BENDING ROLLS. - FOOT PEDAL CONTROL with 2 pedals + side roll up/down + sheet clamping + emergency stop. - ELECTRONIC PHASE CONTROL for power supply. - ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS. INCLUDED WITH MACHINE: - Front conical device on upper roll. - Digital display for side roll position. - Digital display for sheet clamping position.

Tilstand: brukt, Plate width 250 mm Coil outer diameter 1400 mm Kedsfn Aqmepfx Ab Dsll Load capacity 2500 kg Sheet thickness 2 ... 4 mm Straightening speed 2.5 ... 15 m/min Decoiler: Expanding range mm Total connected load 1 + 4 kW Machine weight approx. 1.8 t Space requirement approx. m Decoiler MHR 250/4: Max. coil diameter: 1400 mm Coil inner diameter: 450 - 530 mm Unbraked decoiler with hold-down arm Straightening machine MR 250/4: Strip entry height: 1250 mm The line has been dismantled, inspected, and repainted.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Byggeår: 2020, maskin-/kjøretøynummer: A1221E0223, styretype: CNC-styring, automatiseringsgrad: halvautomatisk, aktueringstype: elektrisk, kontrollerprodusent: Siemens, kontrollermodell: Sinumetrik 840 D SL, Utstyr: CE-merking, sikkerhetslysbarriere, Type: TruLaser 3030 fiber (L81), year of manufacture 2020, working area 3000x1500 mm, laser power 4000 watts, controller Siemens Sinumerik 840 D SL, max. sheet thickness/steel 20 mm, max. sheet thickness/stainless steel 20 mm, sheet thickness/aluminum 20 mm, max. speed 170 m/min, accuracy 0.1 mm Length 9,229 mm, width 6,145 mm, height 2,200 mm, weight 11,700 kg Machine number: A1221E0223 • Longitudinal conveyor belt • Integrated control cabinets • Integrated cabinet • Work area lighting • Positioning laser diode • Spray device • Ambient temperature for machine operation 5-40°C • Machine status indicator • Dust protection for equipment panel Trumpf Laser • HighSpeed and Performance cutting package • Fusion cutting • Pump diode excitation • Laser power control Cutting Unit • Single cutting head strategy • Universal cutting unit with adaptive lens system • Protective glass • Online monitoring of shielding gas • Automatic nozzle alignment Controller Kedpfx Aboxz Dwao Dell • SINUMERIK 840D SL controller • Rapid reproduction • Integrated technology data • Copper cutting package • Brass cutting package • Auto shutdown function • Programmable cutting gas/pressure selection • Microweld • Production planning • Remote support interface • Multi-sheet processing • Condition Guide • Cutting Guide • Extended machine sensor system for Condition Guide • Ergonomic operator panel with 21.5” wide-screen multi-touch Functions • AdjustLine • ContolLine • FastLine • FlyLine • NitroLine • PierceLine • FocusLine Data transmission • USB interface • RJ45 network connection • Central Link • Online Update Manager Safety • CE marking • Light barriers • Multi-chamber extraction unit • Machine enclosure with certified viewing window, right-hand door Extended equipment • Support bars made of structural steel • Compact extraction unit • TruDisk power supply integrated in the machine • Sliding roof • Automatic longitudinal plate changer • External solid state laser TruDisk 4001 with 1 fiber output incl. • 1 fiber output • BrightLine fiber • Performance package for fusion cutting • HighSpeed cutting package • HighSpeed ECO cutting package • Drop & Cut • Integrated Camera 1 for process monitoring • View of the front area of the working chamber (approx. 2.5 m) • Connection for exhaust duct of compact extraction unit • Wireless Operation Package + including Storemaster

Tilstand: ny, Byggeår: 2024, SCHORR belted dumper with tipping skip, hydraulic tipping and ride-on platform, 500kg load capacity, 9.2 HP engine -- Self-propelled and powerful rubber track drive -- Large and high-quality tipping skip Kjdpfx Abemv Eu Re Doll -- Foldable ride-on platform as standard -- Width of only 680mm -- Excellent price-performance ratio -- NEW & AVAILABLE IMMEDIATELY! The SCHORR tracked dumper RR500DHKB is equipped with hydraulic tipping and has a payload capacity of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke petrol engine. Thanks to its slim construction (680mm), the mini dumper can also pass through narrow paths and doorways, making it an extremely flexible means of transport. The robust rubber track drive allows you to easily handle rough terrain, gradients and kerbs. The rubber tracks provide a secure footing in any work area. Raising and lowering the tipping skip is effortless even when fully loaded, thanks to the hydraulic system. With a sturdy skip made from thick sheet steel and removable side panels, the loading area can be enlarged as needed, allowing you to transport items such as Euro pallets or firewood. SCHORR Mini Dumper RR500DHKB - Highlights at a glance: -- Self-propelled and powerful rubber tracked drive -- Large, high-quality tipping skip -- Foldable ride-on platform included as standard -- Removable side panels allow for an enlarged loading area Technical data: Payload: 500kg Weight: 284kg Tipping mechanism: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Recoil starter Length: 950mm Width: 680mm Height: 465mm Track width: 180mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable skip Packaging: Plywood crate Packing size: 167x77x113cm Our mini dumper is extremely manoeuvrable and is often used on construction sites, in agriculture and forestry, and in landscaping or for renovation work. Especially when combined with one of our mini excavators, the tracked dumper is a worthwhile investment. Excavated material can be easily transported to containers or similar with the mini dumper. Of course, we have all spare parts in stock at all times and can deliver them quickly should you ever encounter an issue. If you require technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Whether you want the mini dumper delivered or prefer to collect it from us in 48465 Schüttorf, we have the right solution for you. Please feel free to contact us. To make collections and viewings as convenient as possible, please note that these are only possible by prior telephone appointment. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various possibilities. We look forward to your enquiry! We at SCHORR are happy to answer any remaining questions you have about our mini dumpers. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2025, driftstimer: 19 h, SCHORR crawler dumper with skip, hydraulic tipping, and ride-on platform - 500 kg payload, 9.2 HP engine Powerful mini dumper in excellent condition for sale! The machine is in very well-maintained condition and ready for immediate use. Condition: Used, very good Operating hours: 19h Year of manufacture: 2025 Kedpfswh I Avox Ab Djll -- Self-propelled with robust crawler drive -- Large and high-quality tipping skip -- Foldable ride-on platform as standard -- Only 680 mm wide -- Excellent price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR crawler dumper RR500DHKB features a hydraulic tipping mechanism and offers a payload of 500 kg along with a powerful 9.2 HP single-cylinder 4-stroke petrol engine. Its slim design (680 mm) allows the mini dumper to pass through narrow paths and doorways, making it an extremely flexible transport solution. Thanks to the strong track drive, the mini dumper easily tackles rough terrain, inclines, and kerbs. The rubber tracks ensure a safe footing in any working environment. Lifting and lowering the skip is effortless, even when fully loaded. The robust skip, made from thick sheet metal and with removable side panels, allows the loading area to be expanded for transporting items such as Euro pallets or firewood. SCHORR Mini Dumper RR500DHKB – At a glance: -- Self-propelled with powerful crawler drive -- Large, high-quality tipping skip -- Foldable ride-on platform as standard -- Removable side panels for expanding the loading area Technical data: Payload: 500 kg Weight: 284 kg Tipping mechanism: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Recoil starter Length: 950 mm Width: 680 mm Height: 465 mm Track width: 180 mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable skip Packing type: Plywood crate Packing dimensions: 167x77x113 cm Our mini dumper is highly maneuverable and frequently used on construction sites, in agriculture and forestry, landscaping, and for renovation work. Especially in combination with one of our mini excavators, the crawler dumper is a worthwhile investment. Excavated material can be easily transported to a container or similar by the dumper. Naturally, we always have all spare parts in stock and can deliver quickly should any issues arise. If you require technical assistance, we have the necessary expertise and can carry out repairs in our in-house workshop. Whether you prefer delivery or wish to collect the mini dumper from our site in 48465 Schüttorf, we have the right solution for you. Feel free to contact us. To make collections and inspections as convenient as possible for you, please note that these are only possible by prior telephone appointment. We at SCHORR are happy to answer any further questions regarding our mini dumpers. You can reach our experienced team by phone or email. We look forward to hearing from you and assisting with your enquiry.

Tilstand: ny, Byggeår: 2025, PLATE BENDING MACHINE MODEL ZGDS-100 Ksdpfx Abohwztte Dell WORKING LENGTH 1000 MM ALL THREE ROLLER ROWS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENDABLE STEEL SHEET: 0.8 MM MACHINE WEIGHT: 100 KG.

Tilstand: ny, Byggeår: 2025, PLATE BENDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM Kjdpfx Abjhwztwo Djll ALL THREE ROLLERS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENT STEEL SHEET: 0.7 MM WEIGHT OF THE UNIT: 125 KG.

Tilstand: ny, Byggeår: 2025, PLATE BENDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM ALL THREE ROLLERS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENT STEEL SHEET: 0.7 MM WEIGHT OF THE UNIT: 125 KG. Klodpfxehy El Sj Ab Del

Tilstand: ny, Byggeår: 2024, PLATE BENDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM Klsdpfx Aeiwdi Dob Dsl ALL THREE ROLLERS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENT STEEL SHEET: 0.7 MM WEIGHT OF THE UNIT: 125 KG.

Tilstand: nesten som ny (brukt), Byggeår: 2001, AMADA EUROPE 245 Turret Punch Press Technical Data: - CNC control: FANUC 18i-P - Pressing force: 20 Ton - Max. punching format without repositioning and with 31-station turret: 1020 x 1290 mm (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - Max. sheet size with repositioning: 1020 x 2540 mm - Max. sheet size with repositioning + 1 rotation (optional): 1500 x 2540 mm - Max. sheet thickness on ball table: 6 mm - Max. sheet thickness on brush table: 3 mm - Max. permissible table load: 100 kg - Punching accuracy: ±0.1 mm - Positioning accuracy: ±0.07 mm - Number of pneumatic clamps: 2 - Number of simultaneously controlled axes: 3 (X, Y, C) - Turret rotation speed: 25 rpm - Hits per minute at 25.4 mm distance, 6.5 mm cylinder stroke: 220 hits/min - Nibbling, 1 mm spacing, 6.5 mm cylinder stroke: 480 hits/min - Minimum programmable increment: 0.001 mm - Number of tool stations: 31, including 3 indexable - Max. tool diameter: 88.9 mm Kledpfx Abshvaaao Djl - Indexable stations: 2x1 1/4"; 1x2" - Max. sheet thickness for indexable stations: 3 mm - Slide: hydraulic - Lower dead point of slide stroke: 4 programmable positions - Worktable : X=600, Y=400 mm - Memory capacity: 64 Kb (~63 programs) - Graphic display: 10.4" LCD - Stopping time: 295 ms - Air pressure: 5 kg/cm² (bar) - Air consumption: 250 Nl/min - Oil amount: 160 L - Light curtain (3 beams): standard in European countries - Installed power: 27 kW - Machine dimensions: L=4460 mm, W=2750 mm, H=2130 mm - Transport dimensions: L=4820 mm, W=2500 mm, H=2414 mm - AMADA EUROPE 245 punch press weight: 10,000 kg - Operating hours: 35,000 hours Year of production: 2000.12, installation: 2001 Single owner, service book with full machine history, machine in perfect condition, worked on thin sheets only. Startup warranty included. Operator training included in the price. Contact person: 500114006 Best regards

Tilstand: klar til bruk (brukt), Fritsch Rollfix 5A/630 er en halvautomatisk deigutrullingsmaskin for håndverks- og industribakerier. Med automatisk valsetilpasning og 10 programmerbare innstillinger sikrer den jevn og effektiv deigbehandling. Halvautomatisk deigutrullingsmaskin Automatisk valsetilpasning 10 programmerbare programmer Kan veksles til manuell innstilling Båndbredde: 610 mm Kljdpfsxxx Etex Ab Dsl Valsediameter: 88 mm Valseåpning: 0 – 30 mm Maskinlengde: 3,5 m (med 1,2 m bord) Utførelse: rustfritt stål Melstrøer med justerbar strøbredde Langvirke-enhet

Tilstand: god (brukt), Byggeår: 1995, Funksjonalitet: fullt funksjonell, • Egenskaper: - 5 våtoffset-trykkverk - Banebredde: 520 mm - Trykkbredde: 510 mm - Mekanisk hastighet: 350 m/min Klsdpfx Absxzzz As Dol • Utstyr: - Papiravviklingsstasjon - Banekantstyring - Banetrekk-kontroll / banespenningkontroll - Vendebar (turner bar) - Alkoholfuktesystem - Tverrsnittskutter (sheeter) - Non-stop høystableutlegg - Plate- og filmstanseanlegg - Platebøyebord - Kantavsug • Tilbehør: - Teknisk dokumentasjon - Bruksanvisning - Verktøykasse med verktøy