Kjøp brukt Sheeter (341)

Tilstand: ny, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Angle range 15-50° Sheet thickness 6-40 mm Total power requirement 1.5 kW Feed speed 3.5 m/min Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID is one of the fastest beveling machines with automatic feed available on the market. It is suitable not only for workshops but also for on-site assembly jobs. The machine features a continuously adjustable bevel angle system. Additionally, it comes equipped with an automatic feed, ensuring extremely comfortable operation with the UZ15 RAPID. - Suitable for conventional steel (up to a strength of 600 MPa/87022 PSI), brass, copper, and aluminum materials - For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm - Suitable for sheet thicknesses from 6 – 40 mm - The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to change any parts - Double-sided beveling (X, K) without material repositioning - Simple connection to the 3D manipulator for easier operation and handling - Quiet operation Ncodsk Uqhajpfx Afrol - Equipped with automatic feed - Suitable for stationary or mobile use - The machine can process large workpieces without additional support at a speed of 3.5 m/min - Smaller workpieces can be inserted directly into the machine - Discounted price available when purchasing the UZ15 RAPID together with the 3D manipulator

Tilstand: ny, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Chamfering System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum chamfer width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest chamfering machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops, but also for assembly operations. The machine is equipped with automatic feed, which makes working with the UZ12 ULTRALIGHT very comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminium materials * For chamfering workpieces with minimum dimensions of 65 x 60 x 3 mm * Suitable for sheet thicknesses from 3 to 35 mm Njdpfsppgcyox Afrecl * Chamfering pipes from an inner diameter of 95 mm * Variable adjustment of the required chamfer using interchangeable holder kits for each specified angle * Double-sided bevel (X, K) without material handling * Silent operation * Equipped with automatic feed * Stationary or mobile use * The machine can process large workpieces without any support at a speed of 1.8 m/min * Smaller workpieces can be fed directly into the machine * Lightweight, compact design operable by one operator * Thermal motor protection - Max. chamfer width (hypotenuse): 12 mm - Chamfer angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Sheet thickness capacity: 3 – 35 mm - Motor: 400 W - Feed speed: 1.8 m/min - Dimensions: 470 x 294 x 523 mm We are also pleased to offer you an optional 3D manipulator (mobile) for this device.

Tilstand: nesten som ny (brukt), Byggeår: 2024, CONTAINERTYPE: 20-foot DV storage container / special container / workshop container one way RAL 6005 (Moss Green) Multipurpose personnel door 1x2m Tilt window 1 x 1 m with roller shutter Lighting system with 3x light fixtures and 10x 230V sockets, fused Custom colors available: Anthracite Grey / Gentian Blue / Signal Red / Light Grey / Bottle Green Further individual modifications available at extra cost. RENTAL also possible The advantage of storage containers is mainly their versatility in terms of installation. Storage containers can be used either as stationary units over a longer period or as a temporary solution, ready for onward transport after short-term use. Their construction also allows storage containers to be quickly relocated if necessary. Thus, storage containers provide excellent flexible storage solutions. Ncjdexnzlnspfx Afrjl DELIVERY CONDITION: Fully operational and ready to use Wind- and waterproof, cleaned New paint job and conversion options upon request OPTIONAL MODIFICATIONS: Container shortening to desired length Painting in desired RAL color Special modifications on request TRANSPORT: Shipping of containers to any region Delivery with standard truck chassis or crane vehicles BASIC STRUCTURE: Robust steel frame construction, roof, side and end walls made of fully welded trapezoidal sheet metal, large double container doors with locking mechanisms, wooden floor. DIMENSIONS: External dimensions in mm: 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions in mm: 5,898 x 2,350 x 2,389 (L x W x H) We look forward to your enquiry! BIMICON Container Service Your specialist from Hamburg

Tilstand: brukt, Byggeår: 2012, Horizon Stitchliner SL-5500 S The Horizon Stitchliner 5500 S is a powerful all-in-one solution for brochure production. It combines collating, creasing, folding, stitching, and three-side trimming in one efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous advantages for print shops, bookbinderies, and on-demand printing. This Stitchliner 5500 S consists of the following components: - VAC-1000a and 3x VAC-1000m collator towers - SA-40 accumulator - ST-40 stacking delivery unit - ACF-30 collecting and folding unit - SPF-30 saddle stitcher - HTS-30 three-knife trimmer Special features: - 40 stations - U-shaped configuration: efficient space utilization and easy monitoring - Inline production from collating to the finished product - Variable data processing: the system can handle personalized prints and variable page counts, making it ideal for digital printing - Fully automatic format adjustment for fast job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet formats: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing range: 8-200 pages (max. 5 mm spine thickness) - Production speed: up to 5,500 brochures/hour - Stitch distance: 60-150 mm Technical details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power connection: 400V / 50Hz - Total weight: approx. 2,500 kg All-inclusive package We take care of everything: from secure packaging and transport to customs clearance. Upon request, we can also provide you with a customized leasing offer. Sustainable and cost-effective Opt for a pre-owned machine and benefit twice: protect the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price. Ncjdpfx Afoxr Aicjrol

Tilstand: brukt, Byggeår: 1989, Plate thickness 4.0 mm ST Plate thickness 3.0 mm VA Table size 1200 x 780 mm Blade length 200 x 200 mm Strokes per minute approx. 60 min Adjustable angle from 15° to 150° Motor power 4.0 kW Machine weight approx. 1200 kg Required space approx. 1700 x 1000 x 1500 mm Equipment features: - Electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment via handwheels - Front operation panel - Plexiglass guard for improved visibility - Hardened blades, suitable for cutting stainless steel Ncjdpfx Afjxaa N Nerol - Planed table surface * To prevent 'jamming' or 'slipping' of the sheet - 2x positioning stops * With movable and replaceable stop bars - Lateral scrap ejection - Freely movable foot switch - Operating manual * Machine link: ?machineno=1008-9397088

Tilstand: ny, Plate width: 3100 mm Plate thickness: 10.0 mm Ncodpexabdbsfx Afrjl Plate thickness for stainless steel: 6.0 mm Hold-downs: 14 pieces Strokes per minute: 13 Oil capacity: 260 liters Cutting angle: 2.0° Throat depth: 350 mm Motor power: 22.0 kW Backgauge – adjustable: 1,000 mm Weight: 10,575 kg Dimensions (LxWxH): 4.05 x 2.5 x 2.17 m Manufacturer ERMAK offers you with the HGD hydraulic swing beam shear a robust and durable machine for economical sheet metal processing. With this compact all-round machine, you can increase your productivity. The HGD hydraulic swing beam shear supports you in precise, fast, and cost-efficient cuts in your daily workflow. The use of hydraulic hold-downs to secure the sheet and a support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control allows for the use of various sheet types that are already stored in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set electro-hydraulically by the CNC controller but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via the touchscreen. Furthermore, the controller offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touch screen control * Including CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touch screen controller, model “CybTouch 8” - Selected functions of the CNC control: * Backgauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including plate thickness * Cutting line illumination (for scribing), and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatic swing-away at max. travel for longer cuts * Including selectable retract function (“swing-away function”) * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to scribe line - Cutting line illumination with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark/conformity declaration - Operating manual + electrical diagram + hydraulic diagram

Tilstand: ny, Plate width: 4100 mm Plate thickness: 10.0 mm Plate thickness (stainless steel): 6.0 mm Hold-down clamps: 28 pcs Stroke rate: 18 strokes/min Oil capacity: 260 liters Cutting angle: 0.5 - 2° Control: CYBELEC Cybtouch Motor power: 22.0 kW Backgauge (adjustable): 1000 mm Dimensions (L-W-H): 6100 x 2580 x 2460 mm Weight: 15,100 kg The manufacturer ERMAK offers you with its hydraulically guided guillotine shear series HVR a robust and durable machine for efficient sheet metal processing. This compact all-round machine helps you increase your productivity. The hydraulic guillotine shear model HVR supports precise, fast, and cost-effective cutting in your daily workflow. The use of hydraulic hold-down clamps for securing sheet metal and a support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC controller allows the use of different sheet types already stored in the material library. After selecting the maximum thickness and material type, the optimal cutting gap and cutting angle are set automatically via the CNC electro-hydraulic controller, but can also be adjusted manually. The position and retract function of the motorized backgauge can be conveniently set via touchscreen. Additionally, the controller offers storage for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC guillotine shear with linear guide * Including CYBELEC CNC touch screen controller * Including CNC electro-hydraulic cutting gap adjustment * Including CNC electro-hydraulic cutting angle adjustment Ncsdpfxjxabwus Afrel ----- Features: - CNC electro-hydraulic guillotine shear (linear guided) - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - CNC controller functions include: * Backgauge preset - X-axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting on scribed line) ... and many more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X-axis) * On ball screw spindles * Automatically swings up at maximum travel for longer cuts * With selectable retract function ("Swing-Away Function") * Positioning accuracy 0.1 mm * Approximate travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - Foldable finger guard with safety switch * Finger guard with viewing windows for cutting on scribed line - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at rear of machine (safety feature) - Movable foot switch - CE mark/conformity declaration - Operating instructions + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting * Monoblock design

Tilstand: brukt, Byggeår: 2009, Plate width 4050 mm Sheet thickness 6.50 mm Sheet thickness for stainless steel 4.00 mm Back gauge - adjustable 1000 mm Strokes 6 - 11 strokes/min Working height 880 mm Control SC 70 Shear angle 0.5 - 3.0 ° Hold-down devices 23 pcs Motor power 11.0 kW Machine weight approx. 7500 kg Dimensions L-W-H 4950 x 1950 x 1720 mm Machine from a light metal production (aluminium) Good condition Incl. special accessories e.g. plate lifting device - Checked condition - Machine video - ?v=pv7RRijDXJA Features: - Electro-hydraulic / guided guillotine shear - HACO CNC control model SC 70, swiveling, front left * Pre-selection of back gauge position * Digital display of actual position * Electro-hydraulic adjustment of shear angle * Electro-hydraulic adjustment of blade gap * Programmable back gauge retraction * Programmable cutting length limitation Ncodpfx Afjxaccrjrel * EMERGENCY stop switch - Electro-hydraulic blade gap adjustment - Electro-hydraulic shear angle adjustment - Motorized back gauge with ball screw spindles - Hydraulic hold-down devices - Front finger guard - Ball rollers in the support table - 1x side gauge with mm scale - 1x freely movable foot switch - Rear safety guard - Original operating manual incl. CE declaration Special accessories included: - Pneumatic sheet lifting device for thin sheet cutting * For sheet thicknesses up to max 4.0 mm * Optimal positioning of thin sheet metal

Tilstand: ny, Plate width 3100 mm Plate thickness 6.0 mm Plate thickness for stainless steel 4.0 mm Frame opening 3100 mm Hold-downs 14 units Oil capacity 150 ltrs Strokes per minute 18 Shearing angle 1.2° Control CYBELEC CybTouch Total power requirement 11.0 kW Weight 6,300 kg Dimensions L-W-H 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you a robust and durable machine for economical sheet metal processing with its hydraulic swing beam shear, model series HGS. This compact all-rounder lets you increase your productivity. The hydraulic swing beam shear HGS supports you with precise, fast and cost-efficient cuts in your day-to-day operations. Hydraulic hold-downs secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient shearing for your operator. The CNC control allows you to use different sheet materials already stored in the integrated material library. After selecting the maximum thickness, the optimal blade gap is automatically set electro-hydraulically by the CNC control but can also be adjusted manually. The position and retract function of the motorized backgauge can be set easily via touchscreen. Furthermore, the controller offers storage for cutting programs with cut sequences. Ncodpexaa D Hefx Afrol ----- robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touchscreen controller * including CNC electro-hydraulic blade gap adjustment ----- Equipment features: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touchscreen controller, model "CybTouch 8" - some CNC control functions: * Backgauge setting – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting to scribe line) ...and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * on ball screw spindles * automatically swings up at maximum travel range for longer cuts * including retract function selectable ("Swing-Away function") * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Fold-up finger guard with safety switch * finger guard with viewing windows for cutting to scribe line - Cutting line illumination with shadow function - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety feature) - Free-moving foot switch - CE mark/declaration of conformity - Operating manual + circuit diagram + hydraulic diagram including special equipment: - Pneumatic sheet support device for thin sheet cutting

Tilstand: brukt, Byggeår: 1996, Plate thickness 6.0 mm steel Plate thickness for stainless steel 4.0 mm Plate thickness 8.0 mm aluminium Angle adjustable from 30° to 140° Table: 950 x 890 mm Blade length 220 x 220 mm Stroke 35 cycles/min Working height 1150 mm Total power 3.0 kW Weight 800 kg Dimensions (L-W-H) 1200 x 1200 x 1400 mm New price approx. €20,000 Special price on request - In inspected condition – machine video - ?v=QmUbaV41BfA Equipment: - Electro-hydraulic notching machine * with adjustable angle 30° – 140° - Cutting capacity up to 6.0 mm sheet thickness (R42/MM2) - Made of special spheroidal cast iron GS500 - The cutting motion is from top to bottom - Robust worktable made of steel with conical grooves * ensuring optimum grip for the positioning angles - The scales are embossed - Automatic blade gap adjustment (patented) - System for automatic adjustment of the gap between upper and lower blades * allows simultaneous cutting of different thicknesses - 2x angle-adjustable positioning stops - Plexiglas finger guard Nedpjxabx Eefx Afrjcl - 1x mobile foot switch - Scrap chute, lateral - Lifting hook for easy transportation - Operating manual (PDF)

Tilstand: brukt, Byggeår: 1987, Plate width: 3050 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Cutting angle: 0.5 - 3.0 ° Hold-down clamps: 18 pcs Strokes: 9 / 14 strokes/min Back gauge - adjustable up to max. 750 mm Control: conventional Motor power: 10.0 kW Weight: 4800 kg Dimensions (LxWxH): 3750 x 1600 x 2450 mm Well-maintained condition (!!) Ncodpfx Afexab Aqsrol Equipment: - Electro-hydraulic, link-guided guillotine shear - Front control panel, left side – easy to operate - With electro-hydraulic cutting angle adjustment - With manual blade gap adjustment (from the rear) - Electro-motoric back gauge, 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side gauge - 1x movable foot switch - Front finger/hand guard - 2x emergency stop buttons at the front - Operating manual (PDF)

Tilstand: ny, Plate width: 2020 mm Sheet thickness: 2.0 mm Opening width: 122 mm with segments Max. bending angle: 0 - 135° Working height: 930 mm Ncsdpfsxaamhox Afrjl Total power requirement: manual operation Machine weight: approx. 1020 kg Space requirements: approx. 2.75 x 0.56 x 1.26 m Features - Segmented upper beam for a wide range of bending options - Versatile bending machine suitable for tinsmiths and repair workshops - High upper beam for producing high-edged profiles - Quick and easy bending process using bow handle - Easy adjustment of the upper beam for efficient operation - Bending angle set via scale - Individually removable segments for box bending - Large opening width for processing large workpieces - Robust construction in modern design Scope of delivery - Segmented upper beam - Bending segments: 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Tilstand: brukt, Byggeår: 1994, Plate width: 3100 mm Plate thickness: 6.35 mm Plate thickness for stainless steel: 4.00 mm Shearing angle: 0.5 - 3.0 ° Blade gap adjustment: 0.05 - 0.8 mm Strokes per minute: 12 - 50 spm Backgauge - adjustable: 5.0 - 750 mm Oil capacity: 120 l Motor power: 7.5 kW Weight: 6400 kg Dimensions (LxWxH): 4045 x 1783 x 1750 mm Good condition (!!) According to the previous owner, very few operating hours From a maintenance workshop Equipment: - Sturdy electro-hydraulic guillotine shear * Design: guide bar system - LVD control panel centralized at the front of the machine - Electro-hydraulic cutting angle adjustment - Manual blade gap adjustment * Adjustment from the front via handwheel * Includes analog value display - Electro-motorized backgauge, with ball screw spindles * Infinitely adjustable range * Analog position display * Rapid traverse function possible - Ball rollers + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating manual Nodpoxaap Njfx Afrecl * Special accessories included: - LVD movable sheet support device for thin sheet cutting - 1x LVD extra-long side gauge, 3,000 mm, with support leg - 1x LVD used set of spare blades

Tilstand: ny, Plate width: 1020 mm Sheet thickness: 2.0 mm Opening width: 48 mm Max. bending angle: 0 - 135° Working height: 900 mm Total power requirement: manual operation Machine weight: approx. 285 kg Space requirement: approx. 1350 x 820 x 1140 mm Features: - Segmented upper and bending beams for a variety of bending options - Clamping via foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for sheet metal workshops and repair operations - Robust construction with modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending applications - Excellent price-performance ratio - Fast and simple bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower beam to suit different sheet thicknesses - High upper beam for producing profiles with high upstands Scope of delivery: - Segmented upper beam - Segmented lower beam Nodpfxsxaaufo Afrecl - Manual back gauge - Bending segments: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Tilstand: brukt, Plate width: 2040 mm Sheet thickness: 3.0 mm Sheet thickness (stainless steel): 1.5 mm Strokes per minute: 50 spm Ncedjxaaqaepfx Afrjl Cutting angle: 1.4 degrees Table height: 750 mm Frame width: 2120 mm Backgauge - adjustable: 1.0 – 550 mm Frame throat: 100 mm Control: manual Motor power: 5.5 kW Machine weight approx. 2050 kg Dimensions (LxWxH): 2600 x 1980 x 1400 mm Features: - sturdy, motorized swing beam guillotine shear - break-proof, torsion-resistant welded steel construction - compact and user-friendly machine design - manual backgauge with analog position display * adjustable from the front * stepless adjustment throughout the entire travel range * adjustment range 1.0 – 550 mm - side machine stand with 100 mm throat depth - manual blade gap adjustment - 1x hold-down bar - 1x long side gauge - 2x support arms - 1x movable foot switch - rear sheet metal chute - 2x emergency stop buttons at the front - connection cable incl. plug - original operating manual * Machine link: ?machineno=1008-9325338

Tilstand: ny, Plate width: 3100 mm Plate thickness: 6.0 mm Frame width: 3,100 mm Hold-downs: 14 units Stroke rate: 16 - 24 strokes/min Oil capacity: 150 liters Shearing angle: 0.5 - 1.5° Plate thickness for stainless steel: 4.0 mm Ncsdpexabcqsfx Afrjl Throat depth: 350 mm Motor power: 11.0 kW Machine weight: approx. 7,060 kg Dimensions (LxWxH): 4.1 x 2.2 x 2.19 m The manufacturer ERMAK offers you with the hydraulic slider-guided guillotine shear of the HVR series a robust and durable machine for economical sheet metal processing. This compact all-round machine can help you increase productivity. The hydraulic guillotine shear model HVR supports you in achieving precise, fast, and cost-efficient cuts in your daily operations. With the use of hydraulic hold-down units for securing the sheet and a support table equipped with integrated ball rollers, ergonomic and efficient cutting for your operator is ensured. The CNC control enables the use of various sheet types pre-installed in the material database. After selecting maximum thickness & material type, the optimal blade clearance and cutting angle are automatically set via the CNC control using electro-hydraulic adjustment—but can also be set manually. The position and retract function of the motorized backgauge can easily be set using the touchscreen. Additionally, the controller offers memory for cutting programs including cut sequences. ----- Robust electro-hydraulic CNC guillotine shear "slider-guided" * Includes CYBELEC CNC touchscreen control * Includes CNC electro-hydraulic blade gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear, slider-guided - Including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Some CNC control features: * Backgauge presetting - X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (for marking/line cutting) ... and many more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cut lengths * Includes selectable retract function ("Swing-Away function") * Positioning accuracy 0.1 mm * Approx. positioning speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a marked line - Cutting line illumination with shadow marking - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety device) - Freely movable foot switch - CE mark/declaration of conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet supporting device for thin sheet cutting

Tilstand: brukt, Byggeår: 2022, Plate width: 3100 mm Plate thickness: 10.0 mm Plate thickness (stainless steel): 6.0 mm Hold-down clamps: 14 pcs Strokes: 13 strokes/min Cutting angle: 2.0° Throat depth: 350 mm Backgauge (adjustable): 1000 (+) mm Oil capacity: 260 ltr. Motor power: 22.0 kW Weight: 10,575 kg Dimensions (LxWxH): 4100 x 2400 x 2170 mm Demonstration / display machine (!!) From our showroom (like NEW) With very low operating hours The manufacturer ERMAK offers you, with the HGD series hydraulic swing beam shear, a robust and durable machine for the efficient processing of sheet metal. This compact all-round machine allows you to increase your productivity. The HGD model hydraulic swing beam shear supports you in precise, fast, and cost-effective cutting in your daily workflow. Hydraulic hold-downs secure the sheet, and the support table with built-in ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control enables you to work with different types of sheet metal, all stored in the materials library. After selecting the maximum thickness, the optimal cutting gap is automatically adjusted by the CNC electro-hydraulically, but can also be set manually. The position and retract function of the motor-driven backgauge can easily be controlled via touchscreen. Furthermore, the control system offers memory for cutting programs with sequence storage. ----- Robust electro-hydraulic CNC swing beam shear * Includes CYBELEC CNC touch screen controller * Includes CNC electro-hydraulic cutting gap adjustment ----- Equipment features: - CNC electro-hydraulic swing beam shear Nsdpfxoxab I Hj Afrscl - Incl. CYBELEC CNC touch screen controller, model 'CybTouch 8' - Selected CNC controller functions: * Backgauge pre-selection - X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material pre-selection, incl. sheet thickness * Cutting line illumination (cutting to mark) ... and many more - Motorized backgauge, travel range = 5.0-1,000 mm (X axis) * On ball screw spindles * Automatically retracts at max. travel for longer cuts * Includes selectable retract function ('Swing-Away Function') * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Flip-up finger guard with safety switch * Finger guard with viewing windows for cutting to mark - Cutting line illumination with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Freely movable foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Tilstand: ny, Plate width: 3100 mm Plate thickness: 13.0 mm Plate thickness for stainless steel: 8.0 mm Hold-down devices: 14 units Strokes per minute: 11 spm Oil capacity: 310 liters Shearing angle: 2.0° Throat depth: 350 mm Table height: 900 mm Total power requirement: 22.0 kW Machine weight approx. 12,200 kg Dimensions (LxWxH) approx. 4100 x 2300 x 2235 mm --- The manufacturer ERMAK offers you, with the hydraulic swing beam shear series HGD, a robust and durable machine for the economical processing of sheet metal. This compact all-round machine allows you to increase your productivity. The hydraulic swing beam shear model HGD supports you in making precise, fast and cost-efficient cuts in your daily operations. By using hydraulic hold-downs to secure the sheet metal and a support table with built-in ball rollers, ergonomic and efficient cutting is ensured for your operator. The CNC control allows for the use of various sheet types already stored in the material library. Once the maximum thickness is selected, the optimal cutting gap is adjusted automatically by the CNC electro-hydraulically, but can also be set manually. The position and retract function of the motorized backgauge can be easily set via touchscreen. Additionally, the controller features a memory for cutting programs with cutting sequences. --- Sturdy electro-hydraulic CNC swing beam shear * including CYBELEC CNC touch screen controller * including CNC electro-hydraulic cutting gap adjustment --- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touch screen controller, model "CybTouch 8" - some functions of the CNC control: * Backgauge preselection – X-axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material preselection including sheet thickness * Cutting line illumination (cutting to scribe line) .. and much more - Motorized backgauge, stroke = 5.0 – 1,000 mm (X-axis) * with ball screws * automatic swing-up at maximum travel for longer cuts Nodpfx Ajxaa U Sofrscl * including selectable retract function ("Swing-Away Function") * positioning accuracy 0.1 mm * traverse speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to scribe - Cutting line illumination with shadow line - BOSCH/HOERBIGER hydraulic unit - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-moving foot switch - CE marking / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Tilstand: brukt, Plate width 4080 mm Sheet thickness 2.0 mm mild steel Sheet thickness for stainless steel 0.8 mm Sheet thickness for aluminium 2.5 mm Cutting angle 1.3 degrees Strokes per minute 34 Frame gap 4310 mm Nedpfxjxabc Rs Afrscl Backgauge - adjustable 15.0 - 750 mm Table height 820 mm Control unit ELGO Motor power 9.0 kW Machine weight approx. 3600 kg Dimensions L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. 70,000 EUR Special price on request The motorised guillotine shear MHSU is based on a distortion-free, rigid welded frame design and a dynamic, low-noise, high-performance geared motor. Maximum static and dynamic rigidity is guaranteed by robustly dimensioned main assemblies such as the cutting beam, supporting table, side frames, and the main drive unit. The motorised guillotine shear has been developed for sheet metal and plastics processing. With this shear, you achieve consistently clean cuts in serial production with ease. Features: - NC robust electro-motorised guillotine shear with swing beam cut - With ELGO NC control unit * Digital position display for the backgauge * Adjustable from the front right * Target/actual value input * Infinitely variable adjustment throughout the entire traverse range * Limit protection via end switch - NC electro-motorised material/backgauge - Break-proof, distortion-free steel welded construction - Compact and clearly arranged machine design - Support table with handgrip recesses - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x movable foot switch - Operating manual Special accessories included: - Pneumatic sheet support device for thin sheet cutting

Tilstand: brukt, Byggeår: 1990, Plate width: 2503 mm Sheet thickness: 4.0 mm (steel) Sheet thickness: 2.5 mm (stainless steel) Sheet thickness: 6.0 mm (aluminium) Strokes under load: 15 - 20 strokes/min Cutting angle: 1.7° Working height: 900 mm Control: ELGO TYPE 85 Total power requirement: 8.5 kW Machine weight approx.: 3400 kg Dimensions (L-W-H): 2913 x 2250 x 1760 mm Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorised back gauge * with ELGO control unit - Manual blade gap adjustment Nedpfx Afjxabd Uorjcl - Front support table incl. hand recesses - 1x robust side stop with scale and tilting cam - 2x robust front support arms - 1x movable foot switch - Front finger guard - Emergency stop button at the front - Operating manual (PDF)

Tilstand: ny, Plate width: 2065 mm Sheet thickness: 1.20 mm Opening width with tooling: 35.0 mm Opening width without tooling: 60.0 mm Max. bending angle: 0 - 135° Total power requirement: manual Machine weight: approx. 520 kg Space requirements: approx. 2400 x 1115 x 1150 mm - Segmented upper beam for a wide variety of bending options - Versatile folding machine suitable for tinsmiths and repair shops - High upper beam for producing tall upturned profiles - Fast and simple bending process via bow handle - Easy adjustment of the upper beam for efficient operation - Bending angle setting via scale - Removable individual segments for box bending - Sturdy construction in a modern design Nodpfx Ajxabvwofrscl Equipment: - Segmented upper and bending beams - Foot clamping - Fixed stop for angle adjustment - Rear gauge - Bending segments: 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Tilstand: brukt, Plate thickness 4.0 mm steel (ST) Plate thickness 3.0 mm stainless steel (VA) Table size 1200 x 780 mm Nodpfx Ajxaavpjfrocl Blade length 200 x 200 mm Strokes per minute approx. 60 Angle adjustable from 15° to 150° Motor power 4.0 kW Machine weight approx. 1200 kg Space requirement approx. 1700 x 1000 x 1500 mm Features: - Electro-hydraulic notching machine with angle adjustment 15° - 150° * Angle adjustment via handwheels - Front control panel - Plexiglass safety guard for increased visibility - Hardened blades suitable for cutting stainless steel - Planed table surface * Prevents the sheet from jamming or slipping - 2x positioning stops * With movable and replaceable stop bars - Lateral scrap ejection - Free-moving foot switch - Operating manual * Machine link: ?machineno=1008-9397092

Tilstand: ny, Plate width: 4100 mm Plate thickness: 6.0 mm Plate thickness for stainless steel: 4.0 mm Hold-downs: 18 units Strokes per minute: 15 Oil capacity: 150 ltr. Cutting angle: 1.2° Control: CYBELEC Cybtouch Backgauge - adjustable: 1000 mm Working height: 800 mm Motor power: 11.0 kW Weight: 8,100 kg Dimensions (LxWxH): 5000 x 2410 x 1650 mm --- The manufacturer ERMAK offers you with its HGS series hydraulic swing beam shear a robust and durable machine for the efficient processing of sheet metal. This compact all-rounder can help you boost your productivity. The HGS model hydraulic swing beam shear supports your daily operations with precise, fast, and cost-effective cutting. Hydraulic hold-downs secure the material, and an inlaid ball transfer support table ensures ergonomic and efficient operation for your operator. The CNC control allows for the use of different sheet types stored in the material library. After selecting the maximum sheet thickness, the optimal cutting gap is set automatically by the CNC electro-hydraulically, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily adjusted via the touchscreen. Additionally, the control offers storage for cutting programs with cutting sequences. --- - Robust electro-hydraulic CNC swing beam shear - Includes CYBELEC CNC touchscreen control - Includes CNC electro-hydraulic cutting gap adjustment --- Equipment features: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Key CNC functions: * Backgauge preselection – X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material selection, including plate thickness * Cutting line illumination (cutting on marking line), and more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * With ball screw spindles * Automatically swings up at max travel for longer cuts Nedpexaa R Tsfx Afrecl * Includes selectable retract function ("Swing-Away Function") * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for marking line cutting - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety device) - Freely movable foot pedal - CE marking / Declaration of Conformity - Operating manual + wiring diagram + hydraulic circuit diagram

Tilstand: ny, Plate width: 3100 mm Plate thickness: 13.0 mm Plate thickness (stainless steel): 8.0 mm Hold-downs: 14 units Strokes per minute: 11 - 20 spm Oil capacity: 310 liters Shearing angle: 0.05 - 2.0° Throat depth: 350 mm Table height: 900 mm Total power requirement: 22.0 kW Machine weight approx.: 13,300 kg Dimensions (L x W x H): 5,110 x 2,570 x 2,400 mm The manufacturer ERMAK offers you with the hydraulically guided guillotine shear of the HVR series a robust and durable machine for efficient sheet metal processing. With this compact all-round machine, you can increase your productivity. The HVR model hydraulic guillotine shear supports you in precise, fast and cost-effective cutting during your daily operations. The use of hydraulic hold-downs for sheet clamping and a support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet types stored in the material library. After selecting the maximum thickness and material type, the optimal blade gap and shearing angle are set automatically by the CNC control via electro-hydraulic adjustment, but can also be manually adjusted. The position and retract function of the motorized backgauge can be easily set via the touchscreen. Additionally, the control features memory for cutting programs with sequence management. ----- Robust electro-hydraulic CNC guillotine shear "precision guided" type * Including CYBELEC CNC touchscreen control * Including CNC electro-hydraulic blade gap adjustment * Including CNC electro-hydraulic shearing angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear, precision-guided - Including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including plate thickness * Cutting line illumination (for scribing)... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * Mounted on ball screw spindles Njdpfoxabiksx Afrecl * Automatically swings up at max travel for longer cuts * Includes selectable retract function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80 mm/sec - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with inspection windows for guided cutting - Cutting line illumination with shadow marking - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety device) - Free-moving foot switch - CE mark / conformity declaration - Operating manual + wiring diagram + hydraulic diagram

Tilstand: ny, Plate width: 2600 mm Plate thickness: 8.0 mm Plate thickness for stainless steel: 5.0 mm Hold-downs: 12 units Strokes per minute: 18 spm Oil capacity: 200 liters Cutting angle: 1.5° Motor power: 15.0 kW Machine weight: approx. 6,300 kg Dimensions (L x W x H): 3525 x 2350 x 1700 mm The manufacturer ERMAK offers you with the HGS series of hydraulic swing beam shears a robust and durable machine for the efficient processing of sheet metal. This compact all-rounder machine will help you increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-effective cutting in your daily workflow. With hydraulic hold-downs to secure the sheet and a support table with integrated ball rollers, your operator is ensured ergonomic and efficient cutting. The CNC controller allows you to select different sheet types already stored in the material library. After selecting the maximum thickness, the ideal cutting gap is automatically set via CNC electro-hydraulic control, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via touchscreen. Furthermore, the controller offers storage for cutting programs with sequence management. ----- Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touchscreen controller Njdpfexab D Iex Afrocl * including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touchscreen controller, model "CybTouch 8" - several functions of the CNC controller: * Backgauge preset - X axis * Cutting gap adjustment * Piece counter * Cut length limitation * Material selection, including sheet thickness * Cut line lighting (cutting to scribe line), and many more - Motorized backgauge, travel = 5.0 – 1,000 mm (X axis) * With recirculating ball screw * Automatically folds up at maximum travel for longer cuts * Includes selectable retract function ("swing-away function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Foldable finger guard with safety switch * Finger guard with viewing windows for scribe line cutting - Cut line lighting with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Mobile foot switch - CE mark/Declaration of Conformity - Operator manual + circuit diagram + hydraulic diagram