Kjøp brukt Schiepe Autoomatic (485)

Byggeår: 1991, Tilstand: svært god (brukt), Katalognummer 7709 TEKNISKE DATA - Avstand mellom første og tredje aggregat: 7400 mm - Maks bredde på element: 250 mm - Maks bredde på pakke: 1200 mm - Maks høyde på pakke: 1300 mm - Manuell justering av aggregatavstand - Programmerbart antall elementer per lag - Mengdetelling av elementer - Total lengde på matevalser: 10200 mm Podpfx Asy Dq H Aoqtegn - Mateversehastighet for valser reguleres via girreduksjon - Automatisk innmating av mellomlegg - Dimensjon på mellomlegg: 1200x18 mm - Magasin for mellomlegg - Totale mål (L/B/H): 10200x2400x2500 mm - Vekt ca. 3000 kg FORDELER – Tyskprodusert – 3 aggregater – Solid konstruksjon – Uten lakkering – Brukt maskin, i svært god stand Nettopris: 185900 PLN Nettopris: 44260 EUR basert på kurs 4,2 EUR (Priser kan endres ved større valutakursendringer)

Tilstand: svært god (brukt), Perfekt bevart seks-spindlet INDEX MS 25 revolverdreiebenk med seks tverrgående og seks langsgående verktøyføringer. Pgsdpjqhkuksfx Aqtsn Prisen er forhandlingsbar avhengig av valgt ekstrautstyr: spennhylser, verktøy, spontransportør osv. Maskinen er fortsatt i produksjon. Besiktigelse mulig etter avtale.

Tilstand: reparasjonstrengende (brukt), Funksjonalitet: fullt funksjonell, kjørelengde: 287 268 km, effekt: 132 kW (179,47 hk), drivstofftype: diesel, girtype: automatisk, totalvekt: 3 000 kg, første registrering: 04/2010, utslippsklasse: Euro 5, farge: grå, dekkstørrelse: 17 Zoll, antall seter: 9, Byggeår: 2010, Utstyr: ABS, aircondition, antispinnsystem, cruise control, elektronisk stabilitetsprogram (ESP), immobilisersystem, kollisjonspute, sentral låsing, servostyring, skyvedør, tilhengerkobling, tåkelys, vinterdekk,

Tilstand: verkstedoverhalt (brukt), Byggeår: 1996, Funksjonalitet: fullt funksjonell, pressekraft: 170 t, påfyllingsåpningens bredde: 1 020 mm, påfyllingsåpningens lengde: 1 800 mm, balebredde: 1 100 mm, ballehøyde: 1 100 mm, balens vekt: 900 kg, totalvekt: 40 000 kg, oljetankkapasitet: 3 000 l, år for siste overhaling: 2025, volumstrøm: 750 m³/t, For sale is a used baling press system, consisting of a chain belt conveyor for pit installation with a feed hopper, a hydraulic pre-compactor with air agitator, a MACPRESSE 111A baling press, and two complete wire feed frames each including 5 wire spool stands, without wire. Technical Data – Press: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressing force: 14 kg/cm² Feed opening dimensions: 1,800 x 1,020 mm Filling volume: 2.5 m³ Theoretical throughput: 750 m³/h Bale size: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Strapping: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/h, depending on material Hydraulic oil tank volume: 3,000 L Transport dimensions press with new machine feet: 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight press: approx. 40 t Remarks: The baling press was partially overhauled in our workshop and tested upon completion; see our function video. The system was previously used to compact paper and cardboard from municipal collection. After the contract period ended, the contract was awarded elsewhere; thus, the entire system is now for sale. Completed overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. All documentation (manual, CE, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We assume no liability for the technical information or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feed belt length: 6,900 mm Inclined belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive axle height above ground: 5,777 mm Pjdpfx Aqey S Rqwjtsgn Side wall height feed belt: 500 mm Side wall height inclined belt: 880 mm Steel slat height: 40 mm Pitch of slats: 1,200 mm Transport dimensions disassembled: 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor (year 2017) was custom-fabricated for the press during the last installation in the Netherlands and newly assembled. The conveyor is in good, operational condition and has therefore not been overhauled. A layout drawing with pit dimensions is available. Scope of delivery: - 1 chain belt conveyor, Wagensveld B.V. - 1 feed hopper with pre-compaction flaps - 1 air agitator - 1 baling press MACPRESSE, type 111A - 2 wire feed frames with wire spool stands, without wire - 1 operating manual incl. CE declaration, electrical and hydraulic schematics

Tilstand: ny, Byggeår: 2026, Bore capacity in steel (diameter): 32.0 mm Bore capacity in cast iron: 35.0 mm Quill stroke: 150 mm Thread cutting capacity: M 22 (St 60) Throat depth: 300 mm Feed range - spindle: 0.1 - 0.2 mm/rev Spindle taper: MK 4 Table size: 480 x 480 mm Spindle speeds - stepless: 80.0 - 1,170 rpm Total power required: 0.90 / 1.35 kW Machine weight approx.: 340 kg Space requirements approx.: 800 x 1000 x 2000 mm Manufacturer’s list price: 8,665 EUR Special price on request Pgjdpfxjx Dngko Aqton Equipment: - robust column drilling machine - "V-belt drive" - stepless speed adjustment - manual and automatic spindle feed - thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - height-adjustable work table * adjustment with hand crank - right/left rotation of the drill spindle - machined machine base incl. coolant device - machine/work lamp - foldable spindle guard - emergency-stop button at the front - CE marking + operating instructions

Tilstand: Defekt reservedelsbærer (brukt), Vickers Type: HVS 1000 The digital micro Vickers hardness tester HVS 1000 features a unique and precise design in mechanics, optics, and light source, and is capable of providing a clearer impression image and thus a more precise measurement. Main purpose and application areas: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet plates, microstructures 2. Carburizing, nitriding and decarburization layers, surface hardening layers, coatings, platings 3. Glass, wafers, ceramic materials Specifications: Model: HVS1000 Type: Digital micro hardness tester Test force (N): 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test force (Kgf): 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Pgodpfx Aezgbr Seqtsn Load control: Automatic loading and release Objective indenter turret: Manual Dwell time (s): 0 - 60 Microscope magnification: 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm): 0.01 Test range: 5 HV – 3000 HV Dimensions of XY test table: 100 x 100 mm XY table movement range: 25 x 25 mm Max. specimen height: 120 mm Max. specimen width: 110 mm Hardness conversion: HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HV, HBW Output: Built-in printer, RS232 interface Power supply: 220V, 60/50Hz Dimensions (mm): 441 x 270 x 480 Net weight (kg): 35 Condition: used Scope of delivery: (See picture) (Specifications, technical data, and information subject to change and error!) For further questions, we will be happy to assist you by phone.

Tilstand: brukt, Byggeår: 2013, Venjakob Perfect paint line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90-degree transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree transfer with nozzle dryer 7. Supply air unit for transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm with 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm with 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm with 4 IR emitters Pgodpfszf N Nisx Aqtsn 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Tilstand: svært god (brukt), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope with newly developed electron optics and intuitive graphical user interface (GUI) running on Microsoft Windows XP Professional. Machine configuration includes the following features: - Magnification range: 5 X - 300,000 X - Acceleration voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, incl. graphical navigation on the specimen holder - Simple sample navigation via click-center-zoom - Field-of-view controlled navigation using 2 navigators - Relative coordinate navigation - Save and recall sample positions - Adjustable image section function for the specimen stage - Field correction during rotation using computer-controlled eccentric rotation - Field correction during tilting via computer-controlled eccentric tilting - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking during Z-axis movement of the sample - Intelligent limit switches for the motorized axes - Specimen stage travel: x = 125 mm, y = 100 mm, z = 5 to 80 mm (continuous), T = -10°C to +90°C, R = 360° (continuous) - Secondary electron detector for high-vacuum operation - Innovative super-conical objective lens ensures highest image resolution even at large tilt angles - Guaranteed resolution in SE image: 3 nm at 30 kV, 15 nm at 1 kV - Simultaneous live image display of multiple detectors - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile specimen chamber with numerous expansion options: free flanges, e.g., for EDX, WDX, EBSD, cathodoluminescence, etc. - Low-maintenance and low-wear, quiet pumping system consisting of fore-vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive safety features against operator error and external supply failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool set, and 6 spare cathodes Additional equipment for scanning electron microscope: - Turbomolecular pump in place of the standard diffusion pump; using a turbomolecular pump eliminates the need for cooling water operation of the SEM. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software transferred to new owner after purchase - Nitrogen-free energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements starting from boron - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standardless element analysis - Image acquisition Pjdpfjzd Ufajx Aqtegn - Super-fast qualitative line scan - Super-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and training - HyperMap - Multipoint analysis - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (see photos) Condition: used (Technical data, specifications and information subject to change. Errors and omissions excepted!)

Tilstand: svært god (brukt), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z axis: 1.25 micron Precision in X and Y axis: 7.5 micron Max. extruder temperature: 500 ºC Max. build chamber temperature: 120 ºC Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum consumption: 3 kW/h 7” LCD touchscreen Remote monitoring Industry 4.0 ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Pgedpfx Ajzd Tugoqten Dual filament loading Automatic filament change Heated feeder Jam detection Filament end sensor Print recovery system Liquid cooling Double-hardened glass Base fixed by vacuum High printing speed Encoder-controlled positioning Condition: used Scope of delivery: (See pictures) (Sale from site!) (Subject to change and errors in technical data, information is subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Tilstand: brukt, Byggeår: 2019, Bruktmaskin Årsmodell: 2019 Tilstand: God (Maskinen har blitt grundig vedlikeholdt hvert år. Sist gang i mars 2026!) Utstyr: Pgodpfx Asy Hyl Tjqtsn - iTronic – Adaptiv trykk- og limmengdekontroll, automatisk finjustering etter program - SPS-styrt innløpsanlegg - Automatisk kjedesmøring, intelligent automatisk transportkjedesmøring - Styring Edge Control 19 - EL GRM trinnløs 400V 50HZ 2,2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ - Styring Edge Control 19 med 18,5" touch fargeskjerm (16:9) - ECO MODE energisparemodus — automatisk standby-funksjon - Fresaggregat 1802 (2 x 2,0 kW, 200 Hz, 12000 omdr/min) med 2 freser for kantbearbeiding - Fres, diamant Ø 70 x 64 x 30 mm, Z2+2, venstreroterende, Air Stream-system (HOLZ-HER / LEUCO patent) - Fres, diamant Ø 70 x 64 x 30 mm, Z2+2, høyreroterende, Air Stream-system (HOLZ-HER / LEUCO patent) - Kantinntrekk 1901 SYNCHRO, automatisk transport av bånd og remser - Limstasjon Glu Jet GJ301 automatic (2,3 kW, 50 Hz) - DW501 SPS MOT. SPRINT MOTORDREVET - Sprayenhet GM501 etter trykkverk med glidemiddel (anbefalt for høyglanskanter) - Kappaggregat 1918 (60 mm) pneumatisk (2 x 0,45 kW, 12000 omdr/min), pneumatisk svingbart 0/10° - Fresaggregat FR701 — 100% repeterbarhet ved trykk på en knapp via slarkfri mekanikk - Air Stream System, Multi-fres, diamant Ø 70,9 x 16 mm, Z=2+2 (x2) - Profilfresaggregat FF701 — 100% repeterbarhet ved trykk på en knapp via slarkfri mekanikk - Fres, diamant Ø 72,5 x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, venstreroterende med CM-teknologi - Fres, diamant Ø 72,5 x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, høyreroterende med CM-teknologi - Skrapestasjon 1929 MOT4 inkl. høyglanspakke, med motorisert innstilling av følgehjul - HW vendbare skjær for skrapebærer, R = 2,0 mm (2 stk. nødvendig) - Flateskrape FK701, med for- og etterskanning for fjerning av limrester - Sprayenhet TR501 for inn- og utløp (separator + rengjøringsmiddel) Inkl. nestingsko under med egen sprayenhet Sted: Hessen Tilgjengelig: Ca. juli 2026

Tilstand: svært god (brukt), Shimadzu Type: Prestige-21 / with AIM-8800 Infrared Microscope Shimadzu IR Prestige-21 Infrared Spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the fields of research and development. It serves as an excellent addition to the already existing FTIR series, which, among others, covers the standard laboratory sector. AIM-8800 Specifications Optics: 15x Cassegrain objective 15x Cassegrain condenser mirror with inlet for purging Pedpfx Aqjzdyyiotjgn MCT Detector: with liquid nitrogen monitoring system Wavelength range: Type 1 – 5000 – 720 cm⁻¹ Type 2 – 5000 – 650 cm⁻¹ Electrically activated aperture XY Θ directional drive. The adjustment increments for the XY directions are 1 µm across the sample surface and 1° steps in the Θ direction (numeric input possible). Minimum adjustment value: 3 µm Motorized XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm; Resolution: 1 µm spacing Sample thickness: Reflection mode – ≤ 40 mm Transmission mode – ≤ 10 mm Operation via main unit keyboard Measurement mode selection / XY stage operation (speed control in 4 steps) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / aperture adjustment / aperture preview / measurement position and recording of aperture settings (10 sample positions, 2 background positions) Ambient conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W 410mm x D 540mm x H 520mm x 36kg Condition: used Scope of delivery: (See image) (Specifications and information subject to change and error!) For further questions, we are happy to assist you by phone.

Tilstand: brukt, Bore capacity in steel (diameter): 23 / 28 mm Throat depth: 260 mm Drilling stroke: 120 mm Tool holder: MT 3 Table size: 500 x 350 mm Pgjdpfx Aed Nxvrsqtsn Column diameter: 100 mm Total power requirement: 1.3 kW Machine weight approx.: 400 kg Space requirements approx.: 800 x 600 x 1750 mm Machine features: - Forward/reverse operation - Infinitely variable speed control - Automatic feed: 0.1 / 0.16 / 0.25

Tilstand: ny, Funksjonalitet: fullt funksjonell, totalvekt: 100 kg, total høyde: 1 660 mm, Byggeår: 2025, inngangsspenning: 230 V, laser effekt: 20 W, laserens bølgelengde: 1 064 nm, type kjøling: luft, type innstrømsstrøm: Klimaanlegg, Laser for product marking – The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. The use of a laser for permanent marking has become indispensable in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for marking long parts, are also available. Made in Germany Pedpfx Aqjwkpwaetegn • Fiber laser 20W (Optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (Optional: 200x200mm) • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Fume extraction (incl. activated carbon filter) • Optional: Autofocus system – system for automatic determination of focus distance • Signal tower for operating status display • Marking software EZCAD (optional: additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum workpiece height approx. 270mm • Electrically adjustable Z-axis (work level setting) • Frame made of aluminum profile • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Tilstand: brukt, Byggeår: 1985, Bore capacity in steel (diameter): 40 mm Throat depth: 300 mm Quill stroke: 180 mm Spindle speed: 55–1450 rpm Feed: 0.1–0.3 mm/rev Machine no.: 5112 Table size: 620 x 470 mm Spindle taper: MT 4 - Infinitely variable drill spindle speeds with back gear - 3 automatic feeds: 0.1 / 0.2 / 0.3 mm/rev - Coolant system - Tapping attachment - Drive: 400 V, 1.4/2.2 kW Pgsdpoyqvlcefx Aqtjn - Required space approx. W 620 x H 1900 x D 950 mm - Weight approx. 450 kg The technical data are as provided by the manufacturer or operator and are therefore not binding for us. Interim sale reserved; exclusively our terms and conditions of business and sale apply. About us - Over 400 machines in stock - More than 15,000 m² storage area, crane capacity 70 t - Over 10,000 accessories for your workshop If you wish to sell machines, production lines, or your entire operation, please contact us. You will find more offers on our website. Inspections possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Tilstand: brukt, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark optical emission spectrometer SpectroMaxX: Using the spark spectrometer, alloy contents and accompanying elements in macroscopic solid samples can be determined with extremely high accuracy, down to the ppm range. Description of the unit: - Open spark stand for high sample throughput - Suitable for a wide range of sample geometries - The following elements are available as base: Magnesium - The elements and concentration ranges that can be analyzed depend on the methods available for the respective base element - Usable wavelength range: 170-670 nm - Output of measurement values in concentrations or intensities - Selectable output units (%, ppm) - Output of statistical key values (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD Optics: - High-resolution CCD multi-detectors - Stabilized against temperature fluctuations - Effective wavelength range: 140-670 nm; the applicable and configured wavelength range is determined by customer application requirements - Automated profiling Analysis modules: - Freely selectable analysis modules - Optimized for customer requirements - Expansion with additional modules on site possible Spark stand: - Open spark stand for high sample throughput and various sample geometries - Minimized argon consumption due to argon-saving module - Optimized argon flow - Reduced cleaning intervals - Spark stand plate can be easily exchanged - Temperature-absorbing design without water cooling - Integrated shutter system for optimal plasma observation Excitation system: - Fully digitalized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control - 32 MHz microcontroller - Max. spark duration: 4000 µs - Max. spark power: 4 kW Display system: - Dedicated microcontroller for each CCD - Serial source interface Spectrometer: - External, state-of-the-art computer - PC system with Windows operating system - Keyboard and mouse - Monitor Software: - Spark Analyzer Pro MAX software for analytic operation and calibration - Continuous automatic hardware diagnosis in the background - Automatic alloy/grade check and identification - Result manager - Online maintenance planner Ambient conditions: - Room temperature: 10-30°C - Conditions: (10-30°C) - Relative humidity: 80%, non-condensing - Atmosphere: free of corrosive fumes and high dust load Spectrometer: - 90-253 V 50/60Hz - Data max. 400 VA during sparking Pgedou S Ahqspfx Aqten - Fuse: 16 A slow-blow - Version: desktop - Depth: 750 mm - Width: 625 mm - Height: 450 mm - Weight: 77 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information subject to change!) For further questions, please contact us by phone.

Tilstand: svært god (brukt), Liebisch Constamatic S1000M-TR Corrosion Test System Manufacturer: Gebr. Liebisch GmbH & Co. KG Model: S1000M-TR (4BVL) Made in Germany Corrosion test system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Internal chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range (test chamber): ambient temperature up to 50°C Temperature range (humidifier): ambient temperature up to 70°C Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test Standards DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature regulation for the test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Specimen holders and rods Test solution reservoir Large insulated hinged lid with gas struts Condition Used device from industrial operation. Visual condition as per photos. Chamber interior shows visible deposits and usage-related discoloration from test media. Control system active, unit can be powered on. A full technical function test under actual testing conditions has not been performed by us. Inspection by appointment possible. Pgodpfx Aqjzcdyxoton Scope of delivery: refer to photos. Loading can be organized. All information provided to the best of our knowledge based on type plates, manufacturer markings, and available data. Subject to errors and changes.

Tilstand: god (brukt), Full-automatic MOSCA strapping machine RO-TR 700-2 Pgjdpfxjtzbhco Aqtjn Manufacturer: Gerd Mosca GmbH Model: RO-TR700-2 PLC control Control panel for setting operating modes, strapping intervals, strap tension Suitable for PP straps, widths: 5, 6, 7, 8, 9, or 12 mm Operating voltage: 400 V 3-phase AC Current consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two with brakes Overall dimensions: approx. 1350 x 1200 x 1650 mm (W x D x H) Further items in other sizes – new and used – can be found in our shop! International shipping costs on request!

Tilstand: ny, Byggeår: 2023, driftstimer: 1 h, Funksjonalitet: fullt funksjonell, totalvekt: 320 kg, drivstofftype: diesel, tankkapasitet: 30 l, farge: grønn, utgangsstrøm: 39 A, utgangsspenning: 400 V, utgangsfrekvens: 50 Hz, type utgangsstrøm: trefaset, nominell effekt: 9,9 kW (13,46 hk), nominell (tilsynelatende) effekt: 13 kVA, kontinuerlig effekt: 10 kW (13,60 hk), kontinuerlig tilsynelatende effekt: 11 kVA, total lengde: 1 360 mm, total bredde: 650 mm, total høyde: 980 mm, rotasjonshastighet (maks.): 3 000 o/min, motordesigner: China, type kjøling: vann, Energigenerator T1200FULL Forhandler av ENERGY Power for life Psdpfx Ajy S Tq Teqtsgn Energy 13,2 kVA Generator T12000FULL dieselaggregat, tilgjengelig for salg hos Van Delft Staal / Aggregaat.store, utviklet for stabil strømforsyning ved strømbrudd. T12000FULL er utstyrt med AVR-teknologi (Automatic Voltage Regulation), som sørger for at spenningen alltid er konstant – ideelt for tilkobling av sensitivt utstyr. ATS automatisk overføringsbryter er tilgjengelig som tilvalg for off-grid-system. Automatisk omkobling ved strømbrudd. Denne dieselgeneratoren er stillegående, effektiv og konstruert for langvarig driftssikkerhet, akkurat slik du forventer fra Van Delft Staal/Aggregaat.store. Fordeler oppsummert: - Effekt: 13,2 kVA / 10,6 kW - Effekt: 9,9 kVA / 7,9 kW - Kontakter: 230V-16A og 400V-32A - 3000 o/min - AVR-system for stabil spenning - Forberedt for ATS: Klargjort for automatsikring (Automatic Transfer Switch / automatisk nettomkobler). Dette betyr at enheten er forhåndskablet eller utstyrt med nødvendige tilkoblinger for enkel montering av ekstern omkobler. - Stillegående, drivstoffgjerrig og enkel å vedlikeholde - Perfekt som nødstrømsaggregat ved strømbrudd Vi leverer alle generatorer startklare og driftstestede. På lager

Tilstand: svært god (brukt), Byggeår: 2017, Brandt KDF 1440 Edition only 1,700 operating hours – very good condition – can also be supplied with preheating station XES 200 Autark (+ €4,500) OVERVIEW OF UNIT CONFIGURATION: JOINT TRIMMING UNIT 2 x 2.2 kW 200 Hz GLUE APPLICATION UNIT QA 65 N END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.18 kW Pgjdozb Iggjpfx Aqten PNEUMATIC ADJUSTMENT FOR END TRIMMING CHAMFER/STRAIGHT MULTI-STAGE TRIMMING UNIT MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT PROFILE TRIMMING UNIT 1 x 0.35 kW WD 60; also suitable for constructional floors PNEUMATIC 2-POINT ADJUSTMENT FOR RADIUS/CHAMFER MULTI-STAGE SCRAPING UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Top pressure: PU rollers instead of standard rollers additional application unit QA 65 N (interchangeable) Separating agent spray station for workpiece Automatic edge feed Multi-point roller tracing for multi-stage trimming unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spray station WORKPIECE AND EDGE PARAMETERS: – Minimum workpiece width: – With workpiece thickness 8–22 mm: 70 mm* – With workpiece thickness 23–40 mm: 120 mm* – With workpiece thickness 41–60 mm: 150 mm* (*dependent on workpiece length) – Workpiece overhang: 38 mm – Workpiece thickness: 8–60 mm – Edge height max. = workpiece height + 6 mm – Edge material coil: 0.4–3 mm – Edge cross-section max.: – For PVC: 135 mm² – For veneer: 100 mm² – Coil diameter max.: 830 mm – Edge material strips: 0.4–8 mm – Edge cross-section max.: – For strips: 360 mm² – Feed rate: 8–14 m/min – Max. feed rate with profile trimmer: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Full description: see pdf

Tilstand: god (brukt), Funksjonalitet: fullt funksjonell, Byggeår: 2015, lastekapasitet: 200 kg, mastetype: teleskopisk, løftehøyde: 19 800 mm, totalvekt: 3 050 kg, transportlengde: 6 400 mm, transportbredde: 1 110 mm, transporthøyde: 1 990 mm, drivstofftype: hybrid, farge: lyseblå, OMME 2200 RBD Telescopic Boom Lift on Crawler Chassis with Combined Battery / Diesel Drive Max. working height: 21.80 m Max. outreach: 12.20 m Max. load capacity: 200 kg Climbing ability: 19 degrees Drive: Kubota diesel engine 18.8 hp and 24 V / 200 Ah 5h battery Colour: light blue Special features: non-marking light-coloured tracks, automatic leveling, radio remote control Features: - Removable basket - Rotating basket +/- 41 degrees - Variable outriggers - Basket size 1.25 x 0.80 m - 230 V power outlet in the basket UVV (Accident Prevention Regulations) inspection up-to-date at handover and technically overhauled. Available from stock in Langenhagen. Pgodpfx Aowyb Enjqton All information about the machine is without guarantee. Subject to errors, typographical mistakes, and prior sale. Leasing offers available through partner companies.

Tilstand: ny, Byggeår: 2025, matelengde X-akse: 500 mm, matinglengde Y-akse: 400 mm, vandring X-akse: 500 mm, vandring Y-aksen: 400 mm, spindelhastighet (maks.): 2 000 o/min, spindelhastighet (min.): 40 o/min, fjærstrøk: 65 mm, hurtigmating X-akse: 1 200 m/min, hurtig tverrslag Y-akse: 1 200 m/min, hurtigmating Z-akse: 1 200 m/min, total lengde: 800 mm, bordbredde: 400 mm, totalvekt: 1 550 kg, ELMAG Universal Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and efficiency, making them a top choice for metalworking professionals. This ergonomically advanced design impresses with easy handling, infinitely variable speed control, and an excellent price-performance ratio, making it ideal for workshops, training centers, and toolmaking. Standard Equipment - Digital position display - 4 long milling arbors (16, 22, 27, 32 mm) - 3 reducing sleeves (Morse Taper 1, 2, 3) - Operating manual / CE documentation Advantages - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Precision ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in cast base - Digital 3-axis position indicator - Horizontal and vertical milling table - LED table lighting - Vertical milling head with adjustable quill - Central lubrication system included - Digital spindle speed display - Rapid traverse on all 3 axes - Milling head swivel ± 45° - Swiveling operator panel - Digital position display for maximum precision on all 3 axes - Spindle forward and reverse rotation - Digital speed display - Potentiometer for infinitely adjustable feed axes - Jog switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop button Technical Data Drilling capacity in steel: 50 mm Milling capacity, face cutter: 125 mm Milling capacity, end mill: 40 mm Spindle taper (rotary spindle): ISO 40 Spindle speed range: 40 – 2000 rpm Speed steps: stepless Quill stroke: 65 mm Milling table T-slots / width x pitch: 6 / 14 x 63 mm Vertical table T-slots / width x pitch: 3 / 14 x 63 mm Spindle extension: 180 – 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Quill distance to table: 50 – 450 mm Horizontal spindle distance to table: 145 – 545 mm Psdey Hlx Ejpfx Aqtogn Milling table area: 800 x 400 mm Table travel X x Z: 500 x 400 mm Vertical table area: 1020 x 225 mm Feeds X/Y/Z: 10 – 1200 mm/min Feed settings X/Y/Z: stepless Motor power: 3700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Electrical connection: 400/50 V/Hz Machine dimensions: 800 x 400 x 450 mm Length x width: 1500 x 1700 mm Height: 2000 mm Weight: 1550 kg The machine is located at our premises in 71334 Waiblingen-Beinstein. It is immediately available and can be inspected upon request. Please arrange an appointment in advance.

Tilstand: ny, Sommer automatic GS 6-5 monteringsgriper JC/63158, ubrukt, 100% funksjonell, leveringsomfang i henhold til bilder. Pgsdpfx Aqey Rcmnjtsn

Tilstand: klar til bruk (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Möllers Palletiser for bags (10–30 kg) Möllers palletising machine for automatic stacking of bags ranging from 10 to 30 kg. Type: low-level infeed Estimated capacity: approx. 600 bags per hour Currently still in operation until the end of 2026 at a capacity of approx. 200 bags per hour Inspection possible by appointment Control cabinet and PLC are not original; upgraded with a Siemens S7 PLC by Global Services CMS Paper documentation available Preferably sold together with the Möllers Stretch Hooder (see other advertisement) Machine is in working condition and can be viewed in operation. Möllers palletising machine Möllers palletiser for bags Möllers bag palletiser Pgodpfxjza Dibs Aqtjn Möllers palletising robot Palletiser for 10-30 kg bags Bag palletising machine Bag palletiser 10 kg 30 kg Low-level palletiser Low infeed palletiser Automatic bag palletising machine Bag handling palletiser Siemens S7 palletiser Möllers packaging line Used Möllers palletiser Palletiser 600 bags per hour Industrial palletising machine

Tilstand: brukt, Byggeår: 2018, 1 piece CNC-CONTROLLED BORING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel inserting station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traverse speed 78 m/min - Z-axis, position programmable over supporting table 5-40 mm with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option for NC-controlled Y-axis - Drilling depth 0-35 mm (with drill length TL 70 mm) is automatically set with the insertion projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity from 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each 1 stainless steel container for 5 kg glue and 5 l water - Control lamp for glue residue level indication in glue container - 1 pc. left side stop, 1 pc. right side stop and 1 pc. middle stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapter, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, drill spacings freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and workflow optimization, 4 work fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, error diagnostics in clear text OPTIONS: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 4 vertical inclined clamping cylinders 10° with holders, additional (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal boring unit, motor 1.5 kW, with multi-spindle boring head with 3 individually selectable drill spindles, 32 mm pitch in X-axis, tool speed 3000 rpm (standard working length not reduced) 1 Y-axis NC-controlled, with ball screw spindle and dynamic traverse speed of 300 mm/sec. Programmable via software: dowel insertion projection 7-30 mm and bore depth 0-42 mm (with drill length TL 77 mm) for vertical drilling unit drilling from ABOVE, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from ABOVE, motor 1.5 kW, with multi-spindle drilling head with 3 individually selectable drill spindles, 32 mm pitch in X-axis, tool speed 3000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) 1 NC-controlled Z-axis with ba... Pgjdpfxexwaz Hj Aqten

Tilstand: brukt, Byggeår: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal: clamping-drilling-unclamping, with electric skip cycle. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic borehole depth extension for end-face drilling. This eliminates the need to reset the drilling depth when switching from face to end drilling (+10 mm, e.g., for dowel length 35 mm, drilling depth face side 14 mm, and end drilling depth 24 mm). - 1 boring beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas springs. - 1 clamping carrier movable along the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail (fence) 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, - with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for line boring in the 32 mm system. - Side stops and position settings, as well as drilling height positioning via mechanical digital counters on the support table. - Side stops can be easily swung away for shortest retooling times between case, frame, and line boring operations. - Clamping arms for clamping carrier for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drills comprising: - 5 carbide dowel drills, Ø 8x77 mm, right-hand - 4 carbide dowel drills, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal: clamping-drilling-unclamping, with electric skip cycle. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic borehole depth extension for end-face drilling. This eliminates the need to reset the drilling depth when switching from face to end drilling (+10 mm, e.g., for dowel length 35 mm, drilling depth face side 14 mm, and end drilling depth 24 mm). - 1 boring beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas springs. - 1 clamping carrier movable along the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for line boring in the 32 mm system. - Side stops and position settings, as well as drilling height positioning via mechanical digital counters on the support table. - Side stops can be easily swung away for shortest retooling times between case, frame, and line boring operations. Pjdpfx Aqexnlflotjgn - Clamping arms for clamping carrier for line boring positions up to max. 300 mm. - Ideal three-stage tool system. Extraction funnel, dust-tested, Ø 120 mm 1 pc set for line boring in the System