Kjøp brukt Schiepe Autoomatic (331)

Tilstand: svært god (brukt), Byggeår: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus.” This device is not a standard laboratory incubator, but a high-quality safety test chamber designed specifically for aging, performance, and safety testing of lithium-ion energy storage cells. It is a fully functional and inspected unit, which originally had transport damage to the housing. This was professionally repaired and newly painted. Technically flawless – visually in very good condition 100% fully operational – no restrictions Price advantage: €1,000 cheaper than comparable units Special Added Value: The unit is designed to safely detect, monitor, and contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do in concrete terms? (Section 2 – Performance & Application) - Carry out aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Extended temperature run and temperature cycling tests - Tests on unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - R&D laboratories - Test laboratories & safety testing - Automotive / e-mobility / energy storage The P Plus Package turns the KB 720 into a true battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Smoke detector with visual & audible alarm - Mechanical double-door interlock (safe containment) - Spark protection inside the chamber - Exhaust duct with reversible overpressure flap - Connections for external inertization (e.g. nitrogen) - Emergency-off / manual fire suppression trigger - Access ports for charging and measuring cables Result: This device is engineered for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled spread. It is not an abuse or destruction test device, but a safe, standards-compliant test chamber for real-world operating and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Chamber volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Mains connection: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse protection: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ fire suppression system - Large chamber (~700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Documents & Downloads Nlsdpfjyyw E Rjx Ag Rsh Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions? We’re happy to answer your call.

Tilstand: brukt, Byggeår: 2020, Dreiediameter: 380 mm Turning length: 511 mm Control: Mazatrol SmoothG Turning diameter over slide: 276 mm Max. swing diameter over bed: 675 mm Standard machining diameter: 276 mm Bar capacity: 65 mm X-axis travel: 234 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 625 mm Rapid traverse Z-axis: 33 m/min Spindle speed: 35 - 5000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Power (40% duty cycle): 26 kW Rated power (100% continuous operation): 22 kW Max. torque: 465 Nm Rotational speed: 6000 rpm Main drive power: 11 kW Max. torque: 90 Nm Nlodpfotugggex Ag Roh Milling spindle speed (live tools): 35-6000 rpm Max. torque at milling spindle: 47 Nm Drive power – milling spindle: 5.5 kW (40% duty cycle) Milling spindle power (continuous operation): 3.7 kW Number of tool stations: 12 (driven) Tool cross-section (external): 25 sq mm Boring bar diameter: 40 mm Drill diameter: 20 mm Milling cutter diameter: 20 mm Tap diameter: M20x2.5 Indexing time per turret station: approx. 0.20 sec Coolant tank: 180 l Connected load: 46.2 kW Machine weight: approx. 5.9 t Space requirement: approx. 2.7 x 1.9 x 1.9 m Machine is in as-new condition Including the following accessories: - Signal light (3-color LED), rectangular - High-performance coolant system (1.1 kW) Max. flow rate 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle for main spindle - Preparation for oil mist extraction electr./mount 98mm - Preparation for bar feeder - Robot interface (Advance/Profibus) - Chip conveyor with low discharge height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preparation for use of a hollow clamping cylinder on sub spindle - Hollow clamping device incl. draw tube + cylinder - Pull chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Collet change device STANDARD ACCESSORIES Automatic on/off and warm-up function Air blow device at chuck on sub spindle Use of linear guides with carriages USB port (1 connection) Set of manuals in electronic form on CD C-axis main spindle, input accuracy 0.0001° Spindle positioning sub spindle without C-axis, input accuracy 0.001° 12-position VDI tool turret Operator door with interlock switch Double foot pedal for both main and sub spindle Hydraulic pressure interlock Fully enclosed work area, work area lighting Safety precautions according to global standard High-performance coolant system (520W), max. flow rate 11.5 l/min Complete coolant system Automatic opening/closing of chuck jaws Automatic tool setter Absolute positioning system Preparation for chip conveyor (side) Synchronization of main and sub spindle Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control, 19" LCD color screen (touch screen) User macro (600 variables), EIA/ISO input function Optional stop (selective halt) Tool path checking in background Thread cutting function (G33), polar coordinate input (EIA) Direct entry of drawing data LAN/SD memory card interface - Used machine, sold without warranty -

Tilstand: god (brukt), Byggeår: 2011, Funksjonalitet: fullt funksjonell, klippehøyde (maks.): 80 mm, Utstyr: CE-merking, doseringsanlegg, Horisontal platekappesag Felder / Format 4 Type Kappa Automatic KA75 4300 x 4300 Byggeår 2011 Horisontal platesag fra et snekkerverksted Kuttelengde 4300 mm Materialskyvebane 4300 mm Nsdpfsz Rvfmex Ag Rolh Sagbladsoverheng maks. 80 mm Sagmotor 9 kW Forkutter 1,1 kW 9 spennklemmer Hurtigspennsystem for hoved- og forkuttersagblad (ProLock) Elektronisk justering av kutthøyde Automatisk gjenkjenning av kuttelengde via lasersensor på sagevognen Matinhastighet trinnløst justerbar, ca. 5–100 m/min, retur ca. 130 m/min. 3 luftpute-bord (1 x 2300 mm, 2 x 1800 mm) Elektronisk styring – modulært oppbygd styresystem med 24" TFT-flat skjerm. Styringen er forberedt for online-tilkobling og tilkobling av en etikettprinter. Uten optimaliseringsprogramvare – denne forblir hos forrige eier!

Tilstand: brukt, Byggeår: 2020, maskin-/kjøretøynummer: MBI19, Brukt APSOL casepackings-monoblokk - år 2020 Teknisk spesifikasjon og ytelsesdata Apsol Automatic Case Packer fra 2020 er utviklet for pålitelig sekundær emballering i industrielle miljøer. Den robuste konstruksjonen og CE-sertifiserte designet gir jevn ytelse med lav nedetid, noe som gjør den til et utmerket valg for oppgradering av en brukt tappelinje eller til å styrke en brukt industriell pakkeløsning. Hvert format har sitt eget spesifikke griperhode, tilpasset produktet. I brukte formater var konfigurasjonen: 6x2. Produsent: Apsol Produsjonsår: 2020 Produksjonshastighet: 7–9 esker per minutt Elektrisk tilkobling: 400 V AC, 50 Hz, tre-fase (3ph+N+Jord) Installert effekt: 26,5 kW Full belastningsstrøm: 49 A Kortslutningsfasthet: 10 kA Beskyttelsesklasse: IP54 Samsvar: CE Avansert automasjon og styringssystemer Maskinen er designet for driftssikker automatisering, og støtter stabil, repeterbar drift i krevende pakkemiljøer. Det elektriske systemet sikrer balansert kraftdistribusjon og beskyttelse av motorer og drivere. Brukeradgang og sikkerhetsbrytere opprettholder produktivitet og sikkerhet. - Tre-faset industristrømforsyning - CE-godkjent design med integrert elektrisk beskyttelse - IP54 kapslingsgrad for støv- og sprutbeskyttelse - Klare brukergrensesnitt for enkel oppsett og overvåking Integrasjon i produksjonslinjer Maskinen integreres sømløst i drikkevareproduksjon og annen emballeringsindustri. Den er egnet for inline-installasjon etter fyllere, etiketterings- og inspeksjonssystemer, og håndterer overgangen fra primær- til sekundærpakking med stabil kapasitet. Konfigurasjonen tillater synkronisering med oppstrøms transportører og nedstrøms kartongforsegling eller palleteringsutstyr. - Sømløs integrasjon i tappe- og emballeringsanlegg - Kompatibel med oppstrøms fylling, merking og inspeksjonsmoduler - Fungerer godt med kartongforseglere, wrap-around-packere og palleteringsutstyr - Egnet for oppgradering av brukt tappelinje eller utvidelse av emballeringslinje Maskinens tilstand og vedlikeholdshistorikk 2020-modellen og verifisert elektrisk data viser til en moderne plattform klar for umiddelbar installasjon. Tilbys som brukt pakkeløsning i driftsklar stand for å minimere igangkjøringstid og akselerere ramp-up av linjen. Driftsytelse og allsidighet Med kapasitet på 7–9 esker per minutt gir denne Apsol case packeren en balansert kombinasjon av hastighet og pålitelighet, godt egnet for små til mellomstore produksjonslinjer. Fokusert design gir stabil håndtering av kartonger og konsekvent pakkekvalitet, rettet mot kvalitetsbevisste drikkevareprodusenter og generell industriell emballering. Nledpoy Uvhaefx Ag Rjh - Stabil kartonghåndtering for stødig pakkedannelse - Kapasitet tilpasset mellomstore produksjonslinjer - Konstruert for effektiv sekundærpakking

Tilstand: svært god (brukt), Byggeår: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Nlsdpfx Aor Ilb Seg Reh Model: C56 Year of manufacture: 2014 Dimensions: Cutting width: 1300 mm Cutting length: 1300 mm Cutting height: 1300 mm Knife rotation: +/- 360 degrees Max. cutting speed: 25 m/min Information: Very well-maintained CNC contour cutting machine with continuous band knife and automatic sharpening system. High precision in a compact footprint. Very low space requirement. The machine is network-capable and can be integrated into a Windows network. The machine is still in daily operation and can be inspected by appointment. Further information available on request. Available immediately. Dismantling and transport to be arranged by the buyer. Please also see our other listings for sale.

Tilstand: god (brukt), Byggeår: 2006, CNC Long Turning Automatic Lathe Citizen Cincom M16 Technical Data Year of manufacture: 2006 Max. machining diameter: ø16 mm Max. machining length: 200 mm per chuck Max. diameter for front drilling: ø6 mm Max. diameter for front thread cutting: M6 Main spindle bore diameter: ø16 mm Main spindle speed: 200 to 10,000 rpm Main spindle C-axis: 0.001° Max. clamping diameter counter spindle: ø16 mm Max. rear machining length: 125 mm Max. workpiece overhang counter spindle: 25 mm Max. drilling diameter rear machining: ø5 mm Max. rear thread cutting diameter: M5 Counter spindle speed: 200 to 10,000 rpm Tool holder group: max. drilling diameter ø5 mm, max. thread cutting diameter M4 Spindle speed: 200 to 8,000 rpm Turret: max. drilling diameter ø5 mm, max. thread cutting diameter M5 Spindle speed: 200 to 6,500 rpm Nsdpfx Aox Emnreg Rjlh Number of mountable tools: up to 21+α Axis rapid traverse speeds: 20 m/min Smallest input increment: 0.001 mm Axis travels: X1 60.5 mm Y1 208 mm Z1 205 mm X2 107.5 mm Z2 133 mm X3 195 mm Z3 280 mm Main spindle motor power: 2.2 kW Counter spindle motor power: 0.75 kW Driven tool spindle: 0.75 kW The Citizen Cincom M16 is a high-precision CNC Swiss-type lathe designed for demanding series production of small and precision components. With a machining diameter up to ø16 mm, machining length up to 200 mm, and high spindle speeds up to 10,000 rpm, this machine is ideally suited for complex metalworking tasks. The integrated C-axis on both the main and counter spindle allows precise positioning and demanding milling and drilling operations. The machine features an extensive tooling capacity of up to 21 tools as well as several driven tool stations, enabling even complex machining processes to be completed in a single operation. Generous axis travels and precise feed increments down to 0.001 mm ensure maximum production quality with minimal tolerances. Included in the scope of delivery is a LNS Express-220 bar feeder from 2011, providing automated material feed and significantly increasing productivity and process reliability. Various tool holders are also part of the package. Robustly built for continuous industrial use, the machine is ideal for manufacturing watch, medical, electronic, or automotive components. No guarantee is given regarding the correctness, completeness, or currentness of the information provided.

Tilstand: som ny (utstillingsmaskin), Byggeår: 2024, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: AS0456, SPINNER TTS-Duplex High-Performance Precision Lathe with multiple slide systems for simultaneous machining with multiple turrets in parallel featuring TWO turrets, positioned in the upper right and lower left of the working area Slide system 1 (upper-right) with travel paths: X1 = 180 mm Y1 = 90 mm (+/-45 mm) Z1 = 704 mm Slide system 2 (lower-left) with travel paths: X2 = 180 mm Z2 = 620 mm Tool holder interface on turret: BMT45 SPINDLE 1, version up to 5,000 rpm – 65 mm Bar capacity 65 mm SPINDLE 2, version up to 5,000 rpm – 65 mm Bar capacity 65 mm CNC CLAMPING FORCE ADJUSTMENT on spindle 1 FOOT SWITCH CNC CLAMPING FORCE ADJUSTMENT on spindle 2 SPINDLE FLUSHING for spindle 2 FOOT SWITCH Control unit: SIEMENS 840DE with the following basic features: - SPINNER - SPIOS 24" Touch panel for Industry 4.0 applications - Rotatable and tiltable operating panel for best ergonomics - Includes engraving cycles - 24" LCD flat color display with multi-touch functionality - User memory 2 GB - 15 zero point shifts - 1 free USB port - Standard Ethernet port SPINNER MULTI-CONTROL WHEEL on operating panel for the following integrated features in a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed override in single-block setup mode, auto-resetting to 0% at end of block → All important setup functions integrated in a single operating element - SHOPTURN - 4-axis machining with rotary axis - 3D SIMULATION of finished part - REMAINING MATERIAL DETECTION - DXF Reader - 4-axis turning / balanced cutting - "FORCE-CONTROL" – machining with fixed stop - Gear skiving – skiving of straight or helical internal and external gears Energy-saving function including automatic machine shut-down CHIP CONVEYOR as hinged belt conveyor, ejecting to the right, including integrated coolant tank (approx. 200l capacity) and return pump (100l/min at 0.9 bar). COOLANT SYSTEM as auxiliary tank, fully wired with attachments Capacity approx. 800l, incl. low-pressure pump (50l/min at 15 bar), high-pressure pump (22l/min at 80 bar) Cleaning gun in working area EXTRACTOR CONNECTION D=200mm AUTOMATIC DOOR for work area UNIMAG interface for bar feeders PARTS CATCHER DEVICE for part removal PARTS CONVEYOR BELT STANDARD DOCUMENTATION (GERMAN) Consisting of machine manual and CNC manuals Supplied in digital form on the control unit STANDARD PAINTWORK two-tone in light grey RAL7035 and blue grey RAL5008 Electrical configuration to EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Line frequency 50Hz (+/-2%) TN system (5-wire) Toolholder package Nljdpfjy S Tlwjx Ag Rjh Notes: The price includes warranty services only within Germany. For new and demo machines, the images are not necessarily of the actual machine, but of similar reference models. Accessories shown, such as clamping devices or tool holders, are only included in the delivery if listed in the technical description. Please request a detailed ex works quotation. Visit our factory near Munich or one of our showrooms. We may have other comparable machines available. Interim sale expressly reserved.

Byggeår: 2018, Tilstand: klar til bruk (brukt), Jeg selger en fire-siders sprøyteautomat Automatica. 90° mateanlegg. 4 x 2 sprøytepistoler på hver side. Mateanlegg med motorer. Nlodpfx Agjw Ancfe Rjh God stand. Umiddelbart tilgjengelig.

Tilstand: brukt, Byggeår: 2009, - Lengde på finerstrimler (fiberretning): 350–1500 mm - Bredde på finerstrimler (tverrfiberretning): 50–500 mm - Bredde på fineroverflate (tverrfiberretning): min. 260 mm - Tykkelse på finerstrimler: 0,3–1,5 mm Fineringsmaskin med direkte avlegging Produsent: Fischer & Rückle Type: FZR 15 / DAR 22 År: 2009 Tverrmating-skjøtemaskin For mest effektive tverrliming av parallelle finerstrimler til kontinuerlige eller komponenttilpassede fineroverflater. De kuttede eller roterte finerne må være forlimt med PVAc- eller urea-lim. Denne tverrmatings-skjøtemaskinen er det mest økonomiske alternativet til langsgående skjøtemaskiner for tverrfiberapplikasjoner. Produksjon Ca. 17–20 skjøter/min Tekniske data Lengde på finerstrimler (fiberretning): 350–1500 mm Bredde på finerstrimler (tverrfiberretning): 50–500 mm Bredde på fineroverflate (tverrfiberretning): min. 260 mm Tykkelse på finerstrimler: 0,3–1,5 mm Utstyr Mateinnretning for effektiv og komfortabel halvautomatisk mating av finerstrimler. Panel Automatic for komponenttilpassede overflater med forsorterte komponenter og forhåndsvalgt antall finerstrimler. Egenskaper - Perfekt sammenføyning av kuttet eller rotert finer av alle tresorter, også ved bølgete eller krusete finer - Unikt, velprøvd horisontalt pressesystem som gir fullstendig lukkede, faste limfuger - Solid, robust konstruksjon for lang levetid, pålitelig og feilsikker drift - Enkel betjening takket være skjerm, oversiktlige symboler, separat manometer med direkte tilgang osv. - Hevbare trykkbjelker for rask og enkel tilgang til varmeplatene for rengjøring Nledozuz Hljpfx Ag Reh - Få slitedeler, lave kostnader for service og vedlikehold Tverrkutter For å kutte til en forhåndsinnstilt bredde (på tvers av fiberretningen) umiddelbart etter skjøtingen. Den rette justeringen av fineren må overvåkes og korrigeres ved behov ved hjelp av en knapp. Når maskinen kjøres i kontinuerlig modus, stilles den nødvendige avstanden til den direkte stabelinnretningen inn. Direkte stabelinnretning DAR-22 For å levere ut og stable fineroverflaten umiddelbart etter skjøtingen eller kuttingen. De skjøtte overflatene leveres ut og stables forsiktig, uten at denne kompakte stabelinnretningen påfører mekanisk belastning. Min. lengde på finerplater (fiberretning): 350–1500 mm Bredde på finerplater (på tvers av fiberretningen): 260–500–2200 mm Stabeluttak fra venstre, høyre eller bak Maks. stabelhøyde: 500 mm *Pålitelig stabeljustering garanteres ikke Merk: De tekniske dataene og beskrivelsene er et utdrag fra den opprinnelige ordrebekreftelsen. Dataene er kun ment som informasjon og er ikke bindende.

Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: EY-14P-SA Perkins, totalvekt: 425 kg, drivstofftype: diesel, tankkapasitet: 55 l, farge: grønn, effekt: 11,84 kW (16,10 hk), utgangsstrøm: 19 A, utgangsspenning: 400 V, utgangsfrekvens: 50 Hz, type utgangsstrøm: trefaset, nominell effekt: 11,4 kW (15,50 hk), nominell (tilsynelatende) effekt: 14 kVA, kontinuerlig effekt: 10,4 kW (14,14 hk), kontinuerlig tilsynelatende effekt: 13 kVA, total lengde: 1 580 mm, total bredde: 700 mm, total høyde: 1 050 mm, rotasjonshastighet (maks.): 1 500 o/min, motordesigner: Perkins, type kjøling: vann, ytterligere utstyrsfunksjoner: Perkins, Energy EY-14P-SA Perkins dieselaggregat. Energy Generator EY-14P-SA er et robust 13 kVA Perkins dieseldrevet aggregat fra Aggregaat.store/Van Delft Staal, ideelt for bruk ved strømbrudd, byggeprosjekter eller som nødstrømsforsyning. Denne moderne Perkins-dieselgeneratoren gir stabil energi med lavt drivstofforbruk. Nlsdpfx Asy S Tdmog Reh Takket være integrert AVR-teknologi (Automatic Voltage Regulation) holdes spenningen konstant, noe som er avgjørende for sikker bruk av sensitivt elektrisk utstyr. EY-14P-SA kombinerer kraft, stillegående drift og holdbarhet i én kompakt løsning. Elektrisk ytelse: 13kVA, 10,4kW PRP; 14,3kVA, 11,4kW LTP, 400/230V trefase, 50Hz, 1500 rpm. Konfigurasjon: - Perkins 403A-15G1 dieselmotor (ikke utslippssertifisert) - Alternator med automatisk spenningsregulering (AVR) - Utførelse med vær- og lydisolert canopy, RAL 9010 (lys grå) - Beskyttelseskar for drivstofflekkasje og støydempende eksos (lydnivå 70dB +/-3 på 7 meter) - Automatisk nettutfallspanel (AMF) med fullverdig krafttilkoblingsboks, magnetotermisk bryter, batterilader og elektronisk styreenhet Fordeler med EY-14P-SA: - Effekt: 13 kVA / 10,4 kW PRP - Effekt: 14,3 kVA / 11,4 kW LTP - Ren og effektiv drift - 1500 rpm - AVR-system for konstant spenning - Stillegående og brukervennlig dieselmotor - Ideell som aggregat ved strømbrudd eller som mobil strømkilde - Farge: RAL 6017, underside mørk grå RAL 7012 Valgfri pluggenhet: 400V 32A, 63A og 220V 16A, pristillegg €500 Vedlikehold og reparasjoner utføres også På lager

Tilstand: helrenovert (brukt), Byggeår: 2017, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 20170259471, total lengde: 22 000 mm, total høyde: 2 000 mm, total bredde: 2 000 mm, styreskapets lengde: 2 400 mm, styreskapets bredde: 400 mm, garantiperioden: 12 måneder, styreskapshøyde: 2 200 mm, år for siste overhaling: 2025, Sideseal Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine no.: 20170259471 - Year of manufacture: 2017 - BVM item no.: 5947 - Voltage, frequency: 3N 400V, 50Hz - Connected load: P=18KW, I=26A, F=32AT - Condition: completely overhauled with warranty Comtex 4G Shipping: The BVM shipping system “Comtex 4G Shipping” is the complete system for shipping various items in bags directly to the customer, including addressing. Delivery note, invoice, and goods are all packed in a tight-fitting PE film bag, provided with the address label, and handed directly to the respective logistics partner. Technical data: - Sealing width: 750 mm transverse, 800 mm longitudinal - Product height: up to 250 mm - Capacity: up to 25 cycles/min* (Special) equipment: - Special color - Signal control light, 3 colors for displaying malfunction alerts - Pre-accumulation plate, pneumatically controlled, and presence monitoring for film collection tray. Enables tray change during automatic operation (no machine stop required). Note: At this position, the working height of the Comtex is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo operation: infinitely variable speed adjustment) - Film end monitoring by ultrasonic sensor, incl. analog input card (1 per film carrier) - Mechanical distribution device for film waste strips with large film waste storage - Numbering of individual wires in the packaging machine's control cabinet for Comtex 3G and Comtex 4G - Grooves in the aluminium profile covered with plastic profile - Bypass conveyor as a hinged belt integrated in the Comtex after the side sealing station for transferring products out of the machine - Film folding unit without separate control for processing flat film into centerfolded film - Film sealing device for flat films - PN / PN Coupler (Profinet Coupler) for establishing a Profinet connection - Software development for PN / PN coupling consisting of release connection, interlock, and combined fault message Nlodpfx Agew Ryt De Rjh - Film end monitoring on film tray and fill level monitoring on film take-up, detected by light barriers, incl. 3-color signal lamp and acoustic alert - Installation preparation for labeller, suitable models available on request, mounted in the infeed incl. electrical and pneumatic connection - Sealing bar for producing wide seal seam with separate cold knife cut suitable for Comtex 3G, 4G, and Compacta with EGS - Manual labelling device with linear movement (Model: Caljan Type: FPS BVM L113 L) - Resealable film pouches using double-sided adhesive tape inside the bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel so the entire edge of the bag can be removed - Freestanding control cabinet for Comtex with 5 meters of cable - Two consecutively mounted index conveyors (600 x 900 mm / 600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with cut-out for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross sealing for clearance height 220-250 mm - Cognex Scanner System, consisting of: -- Bottom scanner at infeed for delivery notes -- 2 scanners from above -- 1 scanner from above for inspection +++Completely overhauled unit with 12 months warranty according to our attached warranty conditions+++

Tilstand: brukt, Byggeår: 2019, x-axis travel: 2,000 mm y-axis travel: 820 mm z-axis travel: 720 mm Control: Mazatrol Smooth G Spindle taper: SK 40 Spindle speeds: 35 - 12,000 rpm Spindle drive power: 22 kW Distance from spindle nose to table top: 140 - 860 mm Table load capacity: 1,700 kg Rapid traverses x/y/z: 50 m/min Table width: 820 mm Table length: 2,500 mm Table height above floor: 870 mm T-slots: 7 T-slot width: 18 mm T-slot spacing: 100 mm Tool changer: 48 positions Tool change time: 4.7 sec Tool diameter with 2 adjacent vacant pockets: 130 mm Tool diameter with full tool magazine: 80 mm Max. tool weight: 8 kg Max. tool length: 350 mm Required air pressure: 5 - 9 bar Air consumption: 260 l/min Electrical specification – voltage/frequency: 400 V / 50 Hz Coolant tank capacity: 450 l High-performance coolant system: 25 bar Total power requirement: 46.7 kW Machine weight approx.: 14.8 t Space requirements approx.: 4.3 x 3.6 x 3.1 m Nledpfx Aetuggcjg Reh STANDARD EQUIPMENT Adaptation for the European market USB port (1 port) Mazak standard color Spindle speed 12,000 rpm (steep taper 40) Work area lighting SAFETY FEATURES Operator door with interlock switch Work area enclosure Splash guard encloses the work area from the side. Fully enclosed work area Protection against chips, coolant, and access to the work area during automatic operations. Safety devices conform to global standards COOLANT SUPPLY Coolant supply through spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, piping, and nozzles for efficient production of quality components. FACTORY AUTOMATION Automatic on/off and warm-up function Automatic warm-up activation via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory-prepared for chip conveyor (left side) NUMERICAL CONTROL Fixed control/operating unit Relocation detector Mazatrol SmoothG control 19" LCD color monitor (touch screen) Mazak thread tapping/drilling cycle Tornado (Mazatrol) With boring and thread tapping in helical machining mode, a wide range of diameters can be machined at high speeds with just one tool. This function minimizes programming and machining times. EIA/ISO input function Background tool path verification The tool path of a program can be checked even if another program number is called and being executed in automatic mode. 3D coordinate transformation Form compensation for rotary axes Mazacc-2D software (contour compensation) Accuracy is maintained at high feed rates. Software package Mazacc-3D for high-speed machining High-speed, high-precision machining for contours defined at very fine program increments. MAZACC-3D high-speed software package (NO456) is required additionally. High smoothing control LAN interface SD memory card I/F Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece form compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Form compensation for rotary axes - NO497 D) High-precision control for finishing operations - Seamless corner control - ...

Tilstand: klar til bruk (brukt), Byggeår: 2001, To identiske Volvo L180D hjullastere er tilgjengelige. Driftstimer: ca. 30 000 t, Vekt: 32,7 t, Motortype: Volvo TD 122 KHE, Nominelt turtall: 2100/min, Effekt SAE J1995 (brutto): 209 kW (284 hk), Effekt ISO 9249/SAE J1349 (netto): 206 kW (280 hk), Maksimalt dreiemoment ved 900/min, Dreiemoment SAE J1995 (brutto): 1580 Nm, Dreiemoment ISO 9249/SAE J1349 (netto): 1580 Nm, Slagvolum: 12 l, Driftsspenning: 24 V, Batterier: 2x 12 V, Batterikapasitet: 2x 140 Ah, Startstrøm per batteri: 1050 A, Reservekapasitet per batteri: 290 min, Dynamo: 1680 W/60 A, Startereffekt: 6,6 kW (9 hk), Driftsvekt: 26–29 t. Utstyr: Motor: Høyeffektiv dieselmotor med lave utslipp, 6-sylindret rekkemotor, direkteinnsprøytning, turbolader, ladeluftkjøler, 4-takt, utskiftbare sylinderforinger. Luftfiltreringssystem: trinnvis tredelt. Kjølesystem: hydrostatisk drevet vifte med separat kjølekrets for ladeluftkjøler. Dreiemomentomformer: en-trinns. Gir: Volvo HT 220 automatisk powershift-girkasse med mellomaksel og enhåndsbetjening. Girskiftesystem: Volvo Automatic Power Shift Generation II (APS II) med kjøremodusvelger. Aksler: Volvo-aksler med fullflytende aksling og planetnavreduksjon, akselhode i støpejern, stiv foraksel, pendelende bakaksel, 100 % differensialsperre foran. Girtype: Volvo HT 220, Dreiemomentmultiplikator: 2,27:1. Bremsesystem: Våt-skivebremser, helt innkapslet, oljekjølt, montert utvendig på akslene. Befaring på stedet er mulig. Nljdpfx Aszadmaeg Roh

Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, aksel lengde: 1 070 mm, inngangsspenning: 230 V, type innstrømsstrøm: Klimaanlegg, laser effekt: 20 W, type kjøling: luft, total bredde: 920 mm, total høyde: 940 mm, total lengde: 1 760 mm, døråpningsbredde: 670 mm, døråpningshøyde: 500 mm, skanningsområdets lengde: 175 mm, skanningsområde bredde: 175 mm, bevegelsesavstand Z-akse: 400 mm, bordhøyde: 710 mm, bordlengde: 710 mm, bordbredde: 400 mm, påkrevd bredde: 920 mm, krav til højde: 940 mm, laserens bølgelengde: 1 070 nm, plassbehov lengde: 1 760 mm, omgivelsestemperatur (min.): 15 °C, omgivelsestemperatur (maks.): 35 °C, inngangsfrekvens: 50 Hz, uttrekksdyse diameter: 50 mm, arbeidsbredde: 175 mm, Utstyr: førerhus, Fiberlasersystem for professional marking and engraving of metals and plastics. Featuring SK-LASER workstation, laser class 1, with automatic lift door. Laser class 1 · CE certified · Made in Germany System & Lift Door: - Complete system: IPG fiber laser + workstation + electric lift door Nljdpfoyimpasx Ag Roh Process Workflow: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Reach-in protection via safety control system Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy 1.0 mJ - Pulse duration 100 ns - Frequency 20–80 kHz - Wavelength 1060–1070 nm - Beam quality M² < 1.2 - Air cooled, < 400 W Optics & Scanner: - F-theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance-finding lasers - Laser head (Y-axis) manually adjustable Control System: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: Texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum enclosure - Worktable 710 × 400 mm, 25 mm perforated grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction connection DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety Relay - Rear service door (when open laser class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE certified · Made in Germany

Tilstand: helrenovert (brukt), Byggeår: 2025, driftstimer: 50 h, maskin-/kjøretøynummer: 3018-04, Fabrication origin: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centres: 650 mm Grinding capacity SpW+bs: 80 Stroke: 700 LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic travel: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec. Maximum table swiveling: 12°/10°/8.5°/6° Pneumatic relief for table and workhead Nsdpfew T Sd Tox Ag Rolh CROSS SLIDE Max. stroke: 300 mm Rapid travel: 60 mm Infeed depth in diameter: 3.4 mm Feed 1: 0.012–6 mm/min Feed 2: 0.012–1.2 mm/min Incremental feed: 0.001–0.05 mm WHEELHEAD Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Rotational speed: 1670/2110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swiveling range: 0–90° Stepless speed range: 30–1000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. part weight between centres: 130 kg Load capacity for unsupported grinding: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for roundness correction: ±40 μm TECHNICAL PERFORMANCE GUARANTEED WORK ACCURACY Straightness over 630 mm: 0.003 mm Roundness during unsupported grinding: 0.0003 mm UTILITY CONNECTION VALUES Max. absorbed power: 13 kVA Permissible voltage fluctuation: −15% / +10% Permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar All technical data provided without engagement and subject to errors or omissions.

Tilstand: klar til bruk (brukt), Funksjonalitet: fullt funksjonell, Handtmann VF616 Vacuum Filler The Handtmann VF616 vacuum filler is a benchmark machine in the food industry for the precise portioning of meats and viscous products. With its advanced technology, it ensures consistent filling even at very high output rates, while maintaining a homogeneous texture and preventing air bubbles. It is ideally suited for industrial production lines requiring productivity, quality, and hygiene. This filler features a robust vane cell feed system, providing low wear and continuous performance. Its intuitive digital control enables precise portion adjustment as well as centralized management of various parameters, enhancing finished product consistency. Additionally, the integrated vacuum technology improves product shelf life by reducing oxidation. The Handtmann VF616 is compatible with numerous accessories such as automatic clippers, forming machines, and depositors, allowing adaptation to various production types: sausages, pâtés, protein purees, etc. Its compact footprint facilitates easy integration into existing lines, while its hygienic design simplifies cleaning and minimizes downtime. Nodpsxrn Tyefx Ag Rslh In summary, the VF616 offers outstanding versatility, high mechanical reliability, and optimal return on investment for manufacturers seeking consistency, speed, and compliance with strict sanitary standards. Technical specifications: Height: 2,120 mm Width: 1,580 mm Length: 2,250 mm Weight: 1,100 kg Power supply: 380V-400V Capacity: 2,000–3,000 kg Total power: 4.5 kW

Tilstand: svært god (brukt), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope with newly developed electron optics and intuitive graphical user interface (GUI) running on Microsoft Windows XP Professional. Machine configuration includes the following features: - Magnification range: 5 X - 300,000 X - Acceleration voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, incl. graphical navigation on the specimen holder - Simple sample navigation via click-center-zoom - Field-of-view controlled navigation using 2 navigators - Relative coordinate navigation - Save and recall sample positions - Adjustable image section function for the specimen stage - Field correction during rotation using computer-controlled eccentric rotation - Field correction during tilting via computer-controlled eccentric tilting - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking during Z-axis movement of the sample - Intelligent limit switches for the motorized axes - Specimen stage travel: x = 125 mm, y = 100 mm, z = 5 to 80 mm (continuous), T = -10°C to +90°C, R = 360° (continuous) - Secondary electron detector for high-vacuum operation - Innovative super-conical objective lens ensures highest image resolution even at large tilt angles - Guaranteed resolution in SE image: 3 nm at 30 kV, 15 nm at 1 kV - Simultaneous live image display of multiple detectors - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile specimen chamber with numerous expansion options: free flanges, e.g., for EDX, WDX, EBSD, cathodoluminescence, etc. - Low-maintenance and low-wear, quiet pumping system consisting of fore-vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive safety features against operator error and external supply failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool set, and 6 spare cathodes Additional equipment for scanning electron microscope: Nlsdpfszd Ufaex Ag Reh - Turbomolecular pump in place of the standard diffusion pump; using a turbomolecular pump eliminates the need for cooling water operation of the SEM. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software transferred to new owner after purchase - Nitrogen-free energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements starting from boron - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standardless element analysis - Image acquisition - Super-fast qualitative line scan - Super-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and training - HyperMap - Multipoint analysis - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (see photos) Condition: used (Technical data, specifications and information subject to change. Errors and omissions excepted!)

Tilstand: god (brukt), Funksjonalitet: fullt funksjonell, Full-hydraulic circular saw automatic machine, manufacturer: TRENNJAEGER Technical specifications: Saw motor, pole-switchable: 1.5 / 2.0 kW Saw blade: 275 mm 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min Nljdpfjzutnnjx Ag Reh - Integrated hydraulic system - Safety enclosure with limit switch protection - 6 saw speeds

Tilstand: svært god (brukt), Byggeår: 2020, Funksjonalitet: fullt funksjonell, effekt: 4 kW (5,44 hk), inngangsspenning: 400 V, volumstrøm: 3,2 m³/t, filterareal: 21 m², lydnivå: 67 dB, total høyde: 2 000 mm, total lengde: 2 360 mm, total bredde: 900 mm, totalvekt: 770 kg, trykklufttilkobling: 6 stang, uttrekksdyse diameter: 200 mm, SPÄNEX extractor type SMU 32 / 45 BA with container and discharge unit is a compact disposal station for commercial use, designed for installation within the workspace. Consisting of: extractor with a housing that is vacuum-resistant, inlet nozzle with backdraft damper, antistatic filter elements with jet-pulse cleaning, high-performance radial fan with three-phase motor (energy efficiency class IE3) positioned on the clean air side, as well as integrated exhaust silencer and air outlet grille, supply container with 0.55 kW discharge unit, and a control panel with CEE equipment plug (phase inverter). The control system is intended for automatic operation. Automatic start-up control for up to 6 machines and automatic filter cleaning with run-time addition are included. For automatic start-up, sensor coils or volt-free contacts from the connected machines can be used. Optional: - Conversion to chip collection container: €1,270.00 net Alternatively: - Installation of a used rotary valve: €1,690.00 net Nlodpfx Agst Ug Sgo Reh

Tilstand: brukt, Formatkappesag Martin T 65 C Automatic Robust og presis formatkappesag 5,7" berøringsskjerm LCD-fargeskjerm i øyehøyde Motor 5,5 kW Sagblad kan vinkles 0–46° Kutthøyde opptil 204 mm Sagbladdiameter opptil 550 mm Sagbladets hurtigutskiftingssystem «ProLock» Anodisert aluminiumslengdestopp med kontinuerlig anlegg, finjustering av begge vippestoppene, skala med forstørrelsesglass og elektronisk støttet lengdekompensering for vinkelkutt. Utdragbar kuttlengde: 95–3220 mm Anleggslengde 3000 mm Elektromotorisk parallellstoppposisjonering med integrert styring, anodisert, sammenleggbart aluminiumslineal og firfaglig kulelagerføring. Sikkerhetssone (0–200 mm) i holdemodus, skjermoppløsning 0,1 mm, gjentagelsesnøyaktighet ±0,05 mm. Kuttbredde med parallellstopp 1100 mm Dobbel vinkelstopp MitreX CE-utgave Maskinen er VERKSTEDSKONTROLLERT og er i meget god stand, fra et lite verksted Første levering 2016 Tilgjengelig fra vårt anlegg Nljdpfx Agj Aba Dmj Rjh

Tilstand: brukt, Byggeår: 2016, Utstyr: firehjulsdrift, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All servicing carried out by Liebherr and fully documented. Last service by Liebherr on 20.06.2024 at 14,138 hours. 4-cylinder inline engine, water-cooled with turbocharging Emission stage IV, 155 hp Hydrostatic drive with 3-speed gearbox. Speed reduced to 20 km/h, 40 km/h possible (currently 36 km/h). Air conditioning! * Automatic central lubrication system – Liebherr factory installation * Rear area monitoring with camera (functionality not tested!) * Ride control (boom suspension) * Lamp brackets in steel instead of plastic * Fuel pre-filter * Access aid for easier cleaning of the front windscreen * Hinged window in driver's door * Premium display with touchscreen * "Comfort" driver's seat with pneumatic suspension (with seat heating) * Liebherr operating lever (joystick) * Adjustable steering column * 4 work lights on the front of the cab roof * 2 work lights on the rear of the cab roof * Automatic bucket return * Reversible fan (reverse fan) for cleaning the cooling package * Fluff screen in front of the radiator package prevents contamination of the coolers * Pre-separator for engine intake air (TOP-AIR) * Preparation for beacon (warning light) at rear center of cab * Acoustic reversing warning system (reverse beeper) * Radio pre-installation Nsdpfxsyqn Hrs Ag Rolh * Street approval possible!! Tyres: 20.5 x 25 L3 Front axle: 2 x 30% Tyres: 20.5 x 25 L3 Rear axle: 2 x 30% Net price with fixed-mount 2.5 m³ bucket: €44,900 Optional equipment at additional cost: - Hydraulic quick coupler €3,550 - High volume bucket 4 m³ €4,500 - Pallet forks 5 or 8 t from €2,190 Optionally available with scale, e.g. used Pfreundt WK50–WK60 from €3,900 All prices plus 19% VAT or for export. Sale only to commercial customers or for export. Sold as-is, as viewed. No warranty or guarantee. Indicated kilometer and operating hour readings are taken from the meter – accuracy cannot be guaranteed! Subject to prior sale. This vehicle description does not constitute a binding offer and is not to be considered guaranteed characteristics. The description and details serve only as general identification of the machine and do not represent a warranty in the legal sense. Details may not be complete. Stated information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the stipulations in the order confirmation and invoice are valid. The seller assumes no liability or warranty. This advertisement may contain errors in typing or data transmission. The seller has not examined the machine. Equipment must be checked separately where applicable.

Byggeår: 2010, Tilstand: god (brukt), CNC BIESSE BREMA EKO 902 INSERT USED MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating unit and work area on the machine - Numerical control (controller) with BIESSE Works software running on Windows - Vertical positioning of panels with No. 2 panel clamping grippers - Panel feed (in X-axis direction, on a lower support with rubber rollers), movement (in X-axis) of the panel/table clamping grippers WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: Njdpfx Aohknbreg Rslh - No. 1 vertical spindle (electro-spindle) ER32 (4.5 KW) with inverter (up to 18,000 RPM) - No. 1 circular saw (for grooves), diameter 120 mm (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH FACES WITH GLUE PUMP FOR ADHESIVE APPLICATION.

Tilstand: brukt, Universal Tool Milling Machine MAHO Type MH 800 P with Digital Readout and Path Control HEIDENHAIN TNC 121 - Serial no. 80983 | Year of manufacture: 1982 - The machine was overhauled by MMD in 2008, and since then only rarely used in the workshop of an electronics company. Travel: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed rate X, Z axes: 10–500 mm/min, stepless Feed rate Y axis: 5–250 mm/min, stepless Njdpfxov Amrye Ag Rjlh Rapid traverse X, Z axes: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Connected load: 380 Volt, 50 Hz, 10 kW Equipment: - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal built-in rotary table, 360° rotatable, 30° tiltable and inclinable, 225 mm transverse adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via dividing disc 1:120 = 1 revolution = 3° - Swivelling control panel - Central lubrication - Operating manual - Machine mounted on a steel plate (L x W x H): 1400 x 1000 x 50 mm = 550 kg Required space (L x W x H): 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Weight (total, measured): 4250 kg Very good condition

Tilstand: brukt, Byggeår: 2024, lastekapasitet: 45 000 kg, løftehøyde: 15 100 mm, total lengde: 12 200 mm, - Reachstacker for container handling - Capacity: -> 8'6'' container: 45,000 kg lifting capacity - stacking 1/2/3/4/5-high -> 9'6'' container: 45,000 kg lifting capacity - stacking 1/2/3/4/5-high -> 8'6'' container: 32,000 kg lifting capacity - stacking 1/2/3/4/5-high -> 9'6'' container: 32,000 kg lifting capacity - stacking 1/2/3/4-high -> 8'6'' container: 16,000 kg lifting capacity - stacking 1/2/3/4-high -> 9'6'' container: 16,000 kg lifting capacity - stacking 1/2/3-high - Mast: robust, welded 2-stage duplex boom with box and telescopic design - Two lift cylinders in chassis/boom and one extension cylinder in the boom, outreach of 7,000 mm for up to 3 rows deep handling, standard boom tip - Toplift spreader for container handling, maximum lifting capacity 45 tonnes, telescopic 20ft-40ft, 2 hydraulic rotation motors and 2 hydraulic rotation brakes for continuous and safe operation - Side shift ±800 mm (total 1,600 mm) - Mechanical stack tilt ±5° (side tilt/leveling by gravity) - Powered rotation ° - End carriers with 4 heavy-duty lifting hooks for slings (4 x 12.50 t capacity), but max. 45 tonnes - Safety locking with 4 alignment pins and 4 sensors, fitted on twistlock end carriers - LED indicator panel for container handling mounted at the boom tip - LED head-up display for container handling mounted in the cabin - Engine: Volvo TAD1181VE6 diesel engine - 6-cylinder inline engine, turbocharged and intercooled, displacement 10.84 liters - Power, rated/max.: 265/265 kW at 2,100 rpm - Torque, max.: 1,785 Nm at 1,400 rpm - Oil change interval 1,000 h; filter change 1,000 h (without oil sampling) - Dana TE30510 transmission - Automatic powershift and hydrodynamic torque converter - Directional lock for drive direction – forward/reverse - Control and monitoring: electronic CAN bus - Gears: forward 5 – reverse 3 - Cabin: all switches illuminated with LED lights - Head-up LED display for twistlock indication - 2 x 24-V sockets in door pillars - Seat: Grammer Actimo XL, mechanical suspension, 3-point seat belt and high backrest, headrest - Electrically adjustable right armrest - Tinted/laminated windows including sliding windows in left and right doors - Windscreen wipers front (twin), rear and roof window Njdpfx Agezlk Rhe Rslh - Electronically controlled heating/ventilation including air conditioning and fresh air intake filter, disabled when door is open - Complete doors with handle, key lock and ventilation flap (left and right) - Full manoeuvring system right console including standard display (electrically adjustable), multifunction lever left side - Adjustable control, steering console and switch panels - Ergonomic joystick for boom and attachment functions - Speed control pedal right side, brake pedals left and right - Steering wheel with steering knob. Safety override for hydraulic functions (via code) - Radio, MP3, USB, AUX, Bluetooth, hands-free, RDS - 24/12 V converter including four 20-amp sockets on the front cabin posts; 1 x 12 V socket, 2 x 5 V USB sockets, 2 x 24 V sockets - Kalmar steering axle with double slew bearings, mechanical end stops (±3°), and electric power steering with double-acting cylinder enables tight turning radius. - Heavy-duty powertrain...

Tilstand: brukt, Byggeår: 2007, WP Rollprofi compact bun line suitable for the production of cut rolls, smooth round rolls, long-rolled buns, and double rolls. Year of manufacture: 2007 Weight range: 24–85 g Hourly output: max. 4,680 pieces per hour 5-row line with 600 mm working width Integrated dough divider and drum rounder, Multimatic Intermediate proofing time: 12 min 6 min before the long-roll station 6 min between the long-roller and cutting station Rack proofing Nodporzyc Ijfx Ag Rslh Maintenance-free carrier chain with automatic tensioning Variable depositing device for fermentation carrier trays for the 3 Euro sizes: 400×600 / 580×780 / 580×980 mm Decontamination station Siemens touch screen control Photos BEFORE refurbishment/cleaning