Kjøp brukt Schiepe Autoomatic (435)

Byggeår: 1999, Tilstand: svært god (brukt), arbeidsbredde: 620 mm, maskin-/kjøretøynummer: SE 01510 A10, Heateelement Welding Machine HP60/40 by BRANSON Drive: Hydraulic, supported by positioning and control systems. The machine features its own vacuum pump. Very few operating hours (approx. 6,800 hrs). Dkodpfx Asykvdljp Ist Usable heating element area: Width 600 mm x Depth 400 mm Max. part dimensions: Max. part width: 620 mm, max. part depth: 420 mm Max. part height above: 350 mm Max. part height below: 350 mm (Height combinations possible, depending on contour) Max. working temperature for contact process: 400°C The modular frame construction of the machine allows for easy conversions. The side doors and the front door in the welding area can be opened easily (for straightforward tool changes). The automatic safety lift door ensures high operator safety. Temperature controllers in the operator panel feature actual/target value displays. The control device is a Siemens PLC control unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements are equipped with temperature sensors for temperature regulation and for automatic safety shut-off in case of overtemperature. The pin systems in the tool clamping areas enable reproducible positioning. Advantages of heating element welding technology: Reliable welding of workpieces with low or varying wall thicknesses is possible. Low scrap rates due to precise and reproducible welds. Thanks to precise time, temperature, and force control, even sensitive parts can be welded. Almost all thermoplastics can be welded using this process. Different types of plastics can be welded together (compatibility needs to be checked). Technical data: Power supply: 3 x 400 V AC + N + PE Power: 25 kVA Rated current: 20 A Required cable cross-section: 5 wires a. 6 mm² Required pneumatic connection: 6 bar Machine dimensions: Machine width: approx. 1.22 m Machine width with control panel: approx. 1.8 m Machine depth: approx. 2.1 m Machine depth with control panel: approx. 2.6 m Machine height: approx. 2.4 m Machine height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2.2 t.

Tilstand: svært god (brukt), Byggeår: 2017, Brandt KDF 1440 Edition only 1,700 operating hours – very good condition – can also be supplied with preheating station XES 200 Autark (+ €4,500) OVERVIEW OF UNIT CONFIGURATION: JOINT TRIMMING UNIT 2 x 2.2 kW 200 Hz Dedpfxozb Iggo Ap Ijkt GLUE APPLICATION UNIT QA 65 N END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.18 kW PNEUMATIC ADJUSTMENT FOR END TRIMMING CHAMFER/STRAIGHT MULTI-STAGE TRIMMING UNIT MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT PROFILE TRIMMING UNIT 1 x 0.35 kW WD 60; also suitable for constructional floors PNEUMATIC 2-POINT ADJUSTMENT FOR RADIUS/CHAMFER MULTI-STAGE SCRAPING UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Top pressure: PU rollers instead of standard rollers additional application unit QA 65 N (interchangeable) Separating agent spray station for workpiece Automatic edge feed Multi-point roller tracing for multi-stage trimming unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spray station WORKPIECE AND EDGE PARAMETERS: – Minimum workpiece width: – With workpiece thickness 8–22 mm: 70 mm* – With workpiece thickness 23–40 mm: 120 mm* – With workpiece thickness 41–60 mm: 150 mm* (*dependent on workpiece length) – Workpiece overhang: 38 mm – Workpiece thickness: 8–60 mm – Edge height max. = workpiece height + 6 mm – Edge material coil: 0.4–3 mm – Edge cross-section max.: – For PVC: 135 mm² – For veneer: 100 mm² – Coil diameter max.: 830 mm – Edge material strips: 0.4–8 mm – Edge cross-section max.: – For strips: 360 mm² – Feed rate: 8–14 m/min – Max. feed rate with profile trimmer: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Full description: see pdf

Tilstand: ukontrollert (brukt), Byggeår: 2006, for roll and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table D=820 mm transport chain with automatic lubrication hold-back roller for shortest workpiece intervals safety/soundproof hoods central extraction port D=160 mm, jointing cutter D=120 mm chip collection box D=100 mm equipped with: > Jointing unit 1961 incl. DIA cutter Dksdey Ici Ropfx Ap Iot > programmable screen control Edgecontrol > automatic edge magazine 1901 for rolls and strips > glue station 1905 for cartridges + granules, incl. sensing nozzle > pressure unit 1926 motor/pneumatic > end trimming unit 1819 motorized > flush milling unit 1962 > multifunctional milling unit 1966 with various radii/chamfer > multi-radius scraper unit 1965 with various radii > corner rounding 1983 R=2 mm incl. one interchangeable motor R=1 mm > flat scraper 1964 actuator-controlled > buffing unit 1944 immersion-controlled > spray device 1856 at infeed and outfeed > belt bridge > stepless feed up to 24 m/min > scissor-type outfeed support > motorized bridge adjustment > infeed fence motorized adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Tilstand: svært god (brukt), Byggeår: 2020, Funksjonalitet: fullt funksjonell, effekt: 4 kW (5,44 hk), inngangsspenning: 400 V, volumstrøm: 3,2 m³/t, filterareal: 21 m², lydnivå: 67 dB, total høyde: 2 000 mm, total lengde: 2 360 mm, total bredde: 900 mm, totalvekt: 770 kg, trykklufttilkobling: 6 stang, uttrekksdyse diameter: 200 mm, SPÄNEX extractor type SMU 32 / 45 BA with container and discharge unit is a compact disposal station for commercial use, designed for installation within the workspace. Consisting of: extractor with a housing that is vacuum-resistant, inlet nozzle with backdraft damper, antistatic filter elements with jet-pulse cleaning, high-performance radial fan with three-phase motor (energy efficiency class IE3) positioned on the clean air side, as well as integrated exhaust silencer and air outlet grille, supply container with 0.55 kW discharge unit, and a control panel with CEE equipment plug (phase inverter). The control system is intended for automatic operation. Automatic start-up control for up to 6 machines and automatic filter cleaning with run-time addition are included. For automatic start-up, sensor coils or volt-free contacts from the connected machines can be used. Dkedpfx Aot Ug Sgep Ijt Optional: - Conversion to chip collection container: €1,270.00 net Alternatively: - Installation of a used rotary valve: €1,690.00 net

Tilstand: svært god (brukt), Byggeår: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical Data: Distance between centers: 1000 mm Center height: 180 mm Workpiece weight: 70 kg (between centers, floating), 250 kg (fixed between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse taper 4, stepless speed control 30–450 rpm, swivel range 0–90° Tailstock: Morse taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Feed spindle travel: 80 mm Rapid traverse: 50 mm Coarse air cushion adjustment: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3500 kg Infeed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle head for quick and safe approach to the grinding position. Separate drives for external and internal grinding spindles. Fully automatic operating sequence, infeed movement controlled via rotary switch: Rapid approach, rapid return, grinding mode, infeed stop, mym-infeed. Automatic longitudinal grinding cycle Dkjdpfx Apeh Rit Es Ist Central coolant supply for all grinding stations Workpiece headstock with steplessly adjustable drive in both live and fixed spindle modes. Infeed control for longitudinal and plunge grinding, programmable for retraction, infeed amounts, feed rates, spark-out times, idle strokes Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/EMAG/GP cylindrical grinders/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Tilstand: brukt, Byggeår: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control: Fanuc Dsdpfjyqu I Ajx Ap Iskt Model: PRO-3 Tool holder: HSK 100 Drive power: 30 kW Spindle speed: 10,000 rpm Rapid traverse: 35 m/min Tool changer: 90 positions Through-spindle coolant 70 bar Pallet size: 630 x 630 mm Table load: 1,200 kg Rotary table swiveling: 1 degree Pallet changer type: 2 Machine weight: approx. 15 t Special features: Tool magazine for 90 HSK-A100 short taper tools 70 bar high-pressure coolant system Indexable rotary table swiveling in 1° increments Pallet size: 630 x 630 mm Maximum table load: 1,200 kg Hydraulic unit for fixture clamping system Fanuc Pro-3 control Automation: 2-station pallet changer Tool breakage monitoring Automatic workpiece measurement with Marposs probe The technical data are based on manufacturer or operator information and are therefore provided without obligation. Prior sale reserved; only our terms and conditions of business and sale apply. About us More than 400 own machines in stock Over 15,000 m² warehouse space, crane capacity 70 t More than 10,000 items of accessories for your workshop Do you want to sell machines, production lines, or your business? Contact us. You can find more offers on our website. Appointments for viewing available by arrangement. We look forward to your visit. Your Markus Hirsch Team

Tilstand: ny, Byggeår: 2025, matelengde X-akse: 500 mm, matinglengde Y-akse: 400 mm, vandring X-akse: 500 mm, vandring Y-aksen: 400 mm, spindelhastighet (maks.): 2 000 o/min, spindelhastighet (min.): 40 o/min, fjærstrøk: 65 mm, hurtigmating X-akse: 1 200 m/min, hurtig tverrslag Y-akse: 1 200 m/min, hurtigmating Z-akse: 1 200 m/min, total lengde: 800 mm, bordbredde: 400 mm, totalvekt: 1 550 kg, ELMAG Universal Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and efficiency, making them a top choice for metalworking professionals. This ergonomically advanced design impresses with easy handling, infinitely variable speed control, and an excellent price-performance ratio, making it ideal for workshops, training centers, and toolmaking. Standard Equipment - Digital position display - 4 long milling arbors (16, 22, 27, 32 mm) - 3 reducing sleeves (Morse Taper 1, 2, 3) - Operating manual / CE documentation Dodpfxjy Hlx Eo Ap Iokt Advantages - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Precision ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in cast base - Digital 3-axis position indicator - Horizontal and vertical milling table - LED table lighting - Vertical milling head with adjustable quill - Central lubrication system included - Digital spindle speed display - Rapid traverse on all 3 axes - Milling head swivel ± 45° - Swiveling operator panel - Digital position display for maximum precision on all 3 axes - Spindle forward and reverse rotation - Digital speed display - Potentiometer for infinitely adjustable feed axes - Jog switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop button Technical Data Drilling capacity in steel: 50 mm Milling capacity, face cutter: 125 mm Milling capacity, end mill: 40 mm Spindle taper (rotary spindle): ISO 40 Spindle speed range: 40 – 2000 rpm Speed steps: stepless Quill stroke: 65 mm Milling table T-slots / width x pitch: 6 / 14 x 63 mm Vertical table T-slots / width x pitch: 3 / 14 x 63 mm Spindle extension: 180 – 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Quill distance to table: 50 – 450 mm Horizontal spindle distance to table: 145 – 545 mm Milling table area: 800 x 400 mm Table travel X x Z: 500 x 400 mm Vertical table area: 1020 x 225 mm Feeds X/Y/Z: 10 – 1200 mm/min Feed settings X/Y/Z: stepless Motor power: 3700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Electrical connection: 400/50 V/Hz Machine dimensions: 800 x 400 x 450 mm Length x width: 1500 x 1700 mm Height: 2000 mm Weight: 1550 kg The machine is located at our premises in 71334 Waiblingen-Beinstein. It is immediately available and can be inspected upon request. Please arrange an appointment in advance.

Tilstand: svært god (brukt), Byggeår: 2006, CNC machining center with horizontal moving column design, featuring automatic tool changer, linear digital scales on the X, Y, and Z axes, and Siemens 840D computer numerical control. Includes all standard machine equipment: Travel ranges: X = 1500 mm (60”) Y = 1500 mm (60”) Z = 810 mm (32”) Spindle speed range: 20 – 6000 RPM Operator station mounted on platform with CRT Portable pushbutton station for manual machine control Pushbutton for machine setup Safety door mounted on platform with electric interlock Cartridge-type spindle with automatic power input and quick-change system Dedoycxnkspfx Ap Iskt Oblong matrix tool magazine for 90 tools, double chain, mounted on the carriage for interference-free tool storage Tool chain guard with electric interlock Tool changing mechanism mounted on the carriage, facilitating tool changes between the tool magazine and spindle Complete unit comprised of a double arm and its corresponding tool changing mechanism, swinging the tool chain from the magazine to the spindle and vice versa, operated by a hydraulic cylinder. Double arm. Rotation powered by a hydraulic motor, advance/retract movement operated by hydraulic cylinder.

Tilstand: ny, Byggeår: 2024, Fabrikat: DURMA Type: HD-F 3015 III Fiber Year of manufacture: Available to order new (delivery time 6 – 8 weeks) Working area X-Y-Z: 3060 x 1530 x 160 mm Laser power: 6000 Watt IPG Control unit: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness – mild steel: 25 mm Sheet thickness – stainless steel: 15 mm Sheet thickness – aluminium: 20 mm Sheet size: 3048 x 1524 mm Load weight: 200 kg/m² X-Y axis speeds: 100 m/min X-Y axis simultaneous speed: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation dimensions L/W/H: approx. 14500 x 7500 x 2420 mm Weight: approx. 12,000 kg Standard equipment - Automatic pallet changer - Sinumerik 840D control - Precitec Procutter F150 focus automatic focus cutting head - Automatic sheet position and size measuring system - Automatic nozzle cleaning - Position laser diode - Central lubrication - User-friendly parameter interface (power-speed-pressure) - External CAD/CAM programming software with auto-nesting, optionally Lantek software - Work area lighting - Signal beacon - Multi-chamber extraction system - Special laser cutting options - Remote maintenance - CE marking Extended equipment - IPG fiber laser source 6000 Watt including chiller - Filter, Vanterm compact extraction system - Motorized chip conveyor for small parts/scrap - Laser service kit - Cloud license - Lantek Expert Inside software Dedpfxjfkpams Ap Iokt - Lantek software with positioning laser diode and automatic sheet layer detection, measurement - Pierceline - Focusline

Byggeår: 2020, Tilstand: god (brukt), Remmert LaserFLEX | fully automatic loading and unloading – used - : Price ex location: now only €119,000 instead of €145,000 (net) plus disassembly etc.! Djdpfx Aewga E Top Ijkt Manufacturer: Remmert Type: LaserFlex Year of manufacture: approx. 2020 Format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet size: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (the storage system is not included in the sale) Original new price: €250,000 (net) Manufacturer’s description: Equipped with two automation units – one loading and one unloading unit – the LaserFLEX enables decoupling of the loading process of a laser cutting system. After the cutting operation, a fork unit lifts the processed metal sheet from the change table. At the same time, a new sheet is conveyed from the connected storage by a vacuum unit. As soon as the plate is positioned next to the laser system, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With the LaserFLEX, the downtime of the integrated laser cutting systems is reduced to nearly zero, as even high-speed laser machines are optimally supported. Special features: • Exchange time about one minute (for 3015 format) • Highly automated production processes • Decoupling of loading and unloading of the laser cutting system • Manufacturer-independent integration of laser systems • Flexible storage design with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in series configuration • Integration into existing storage and production environments • Intuitive graphical touchscreen operation with visual status management • Modern industrial design Fast, flexible solution for automation of laser systems Increase productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet metal cut-outs Efficient supply and removal for multiple laser systems Intuitive graphical touchscreen operation with visual status management Innovative, modern industrial design Condition: good Availability: immediately Location: 46419 Isselburg

Tilstand: god (brukt), Byggeår: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter and machine enclosure/tray. Dkedpfefrbckex Ap Iet Complete machine documentation available.

Tilstand: god (brukt), Full-automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Model: RO-TR700-2 PLC control Control panel for setting operating modes, strapping intervals, strap tension Suitable for PP straps, widths: 5, 6, 7, 8, 9, or 12 mm Operating voltage: 400 V 3-phase AC Current consumption: 3 A Djdpotzbhcjfx Ap Iekt Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two with brakes Overall dimensions: approx. 1350 x 1200 x 1650 mm (W x D x H) Further items in other sizes – new and used – can be found in our shop! International shipping costs on request!

Tilstand: svært god (brukt), Byggeår: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS cycle-controlled, year of construction 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Dsdpfewyn Rqjx Ap Iskt Spindle speed: 71 to 3550 rpm, 18 steps Feed X and Y: 2 to 1600 mm/min, stepless Feed Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power supply: 400 Volt, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head swivels right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant device beside machine - Control cabinet mounted on the machine - Fixed angle table - Operating manual and circuit diagrams Space requirement (L x W x H): 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We are offering a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tilstand: brukt, Byggeår: 2007, Offset 5 colours with perfecting + coating unit Dkjdev Rx A Hepfx Ap Iet Heidelberg CD74-5-P+LX - C Year of manufacture: 2007 Impressions (millions): 250 Machine Control - CP 2000 - Prinect Axis Control Printing Units - Number of printing units: 5 - Perfecting press: 2/3 - AutoPlate - Alcolor dampening system - Automatic ink roller wash-up device - Automatic blanket wash-up device - Automatic impression cylinder wash-up device - Dampening system: Technotrans beta.c - Ink unit temperature control Coating - Number of coating units: 1 - Tresu chambered doctor blade system - Number of anilox rollers: 1 Drying - DryStar: DryStar 2000 IR + hot-air Delivery - Powder unit: PowderStar Accessories - Air supply cabinet: AirStar - Compressed air compressor: Atlas Copco

Tilstand: brukt, Byggeår: 2012, Nr. 3268 Schirmer BAZ 1000-G6 / VU “Basic” Cutting and Processing Centre Used, Year of manufacture: 2012 Comprising: Dksdpfxjy Nnnns Ap Ist - Schirmer BAZ 1000-G6 / VU “Basic” cutting and processing centre - Schirmer SZA 450 automatic steel cutting unit - Schirmer buffer screw-in station - Schirmer SBZ I bar processing centre Schirmer BAZ 1000-G6 / VU “Basic” Cutting and Processing Centre: - Cutting length: 300 – 3,900 mm - Automatic feed magazine for 9 profiles, maximum length 6,500 mm - Automatic transfer station - Feed unit for PVC profiles up to 6,500 mm in length, with NC-positioned gripper, positioning speed up to 150 m/min - Profile length measuring device including optimisation software - Automatically adjustable profile guides - Processing station designed as G-Module “Ultra Speed” Processing operations on PVC profiles: - Drainage and ventilation slots/bores in sash, frame and transom profiles, handle drilling for entrance doors, striker marking, mortise pocket milling for lock cases - Height measuring unit for detection of profile tolerances - Gasket cutting device - VU saw unit with twin saw assemblies, 2 x 45° - Standard saw unit with one saw assembly, pivoting range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripper for bar offloading, positioning speed up to 180 m/min - PC machine controller: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulation buffer for transfer of profiles to steel insertion and screw stations; steel insertion station with 8 insertion slots - Monitor for steel length display - Automatic label printer Schirmer SZA 450 Automatic Steel Cutting Unit: - Automatic feed magazine, max. profile length 6,000 mm, profile width 25–50 mm, profile height 15–60 mm, wall thickness max. 4 mm - Feed unit - Standard saw unit for 90° cuts - Automatic bar offloading - Belt conveyor - Draw-out device - Steel offcut processing - Steel length measurement in feed magazine Schirmer Buffer Screw-in Station: - Feed unit for PVC profiles up to 3,900 mm - Automatically adjustable profile guides - Screw-driving station - Steel insertion finger for reinforcement profiles up to 200 mm insertion depth Schirmer SBZ I Bar Processing Centre: - Feed unit for PVC profiles up to 3,900 mm - Automatically adjustable profile guides - Touch probe for automatic detection of the zero point at profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, 1 axis for X-feed - NC-controlled gripper for bar offloading - Special belt conveyor for lateral discharge - Closure component visualisation software including monitor - Screw-driving station with automatic screw feeder - Helmet rail with balancer for bar screw assembly - Bar screw assembly with automatic screw feeding System performance: Approx. 120 window units 1400 x 1500 mm / 8 hours If a further screw-assembly unit is installed in the buffer screw-in station, output increases to approx. 160 units / 8 hours Sale on behalf of the customer, ex site near 30625 Hanover, without dismantling, transportation and installation. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. For used machines, all warranties are excluded. Sale is “as inspected and approved”.

Tilstand: ny, Byggeår: 2023, driftstimer: 1 h, Funksjonalitet: fullt funksjonell, totalvekt: 320 kg, drivstofftype: diesel, tankkapasitet: 30 l, farge: grønn, utgangsstrøm: 39 A, utgangsspenning: 400 V, utgangsfrekvens: 50 Hz, type utgangsstrøm: trefaset, nominell effekt: 9,9 kW (13,46 hk), nominell (tilsynelatende) effekt: 13 kVA, kontinuerlig effekt: 10 kW (13,60 hk), kontinuerlig tilsynelatende effekt: 11 kVA, total lengde: 1 360 mm, total bredde: 650 mm, total høyde: 980 mm, rotasjonshastighet (maks.): 3 000 o/min, motordesigner: China, type kjøling: vann, Energigenerator T1200FULL Forhandler av ENERGY Power for life Energy 13,2 kVA Generator T12000FULL dieselaggregat, tilgjengelig for salg hos Van Delft Staal / Aggregaat.store, utviklet for stabil strømforsyning ved strømbrudd. T12000FULL er utstyrt med AVR-teknologi (Automatic Voltage Regulation), som sørger for at spenningen alltid er konstant – ideelt for tilkobling av sensitivt utstyr. ATS automatisk overføringsbryter er tilgjengelig som tilvalg for off-grid-system. Automatisk omkobling ved strømbrudd. Denne dieselgeneratoren er stillegående, effektiv og konstruert for langvarig driftssikkerhet, akkurat slik du forventer fra Van Delft Staal/Aggregaat.store. Fordeler oppsummert: - Effekt: 13,2 kVA / 10,6 kW - Effekt: 9,9 kVA / 7,9 kW - Kontakter: 230V-16A og 400V-32A - 3000 o/min - AVR-system for stabil spenning - Forberedt for ATS: Klargjort for automatsikring (Automatic Transfer Switch / automatisk nettomkobler). Dette betyr at enheten er forhåndskablet eller utstyrt med nødvendige tilkoblinger for enkel montering av ekstern omkobler. - Stillegående, drivstoffgjerrig og enkel å vedlikeholde - Perfekt som nødstrømsaggregat ved strømbrudd Vi leverer alle generatorer startklare og driftstestede. Dkjdpfx Apsy S Tq Tj Iot På lager

Tilstand: ny, Byggeår: 2025, Funksjonalitet: fullt funksjonell, vandring X-akse: 1 500 mm, vandring Y-aksen: 850 mm, bevegelsesavstand Z-akse: 700 mm, hurtigmating X-akse: 20 m/min, hurtig tverrslag Y-akse: 20 m/min, hurtigmating Z-akse: 10 m/min, mating X-akse: 24 m/min, matingshastighet Y-akse: 24 m/min, mating Z-akse: 15 m/min, kontrollerprodusent: Fanuc, kontrollermodell: 0i, emnevekt (maks.): 3 000 kg, bordbredde: 850 mm, bordlengde: 1 500 mm, bordbelastning: 3 000 kg, spindelhastighet (maks.): 600 o/min, antall spindler: 1, antall plasser i verktøymagasinet: 24, Utstyr: dokumentasjon / manual, rotasjonshastighet trinnløst variabel, spontransportør, HAITIAN Precision DA17L8Q High-Speed Double-Column Machining Center DA17L8Q Highlights - Continuously variable spindle speed control - Optimized casting structure and improved chip removal - Short distance from spindle center to Z-axis guideway: low tipping moment, high rigidity - Lightweight construction ensuring rigidity of guides, enabling high dynamic machining performance - Z-axis guideway with hardened box guide structure: high rigidity and shock absorption - 8,000 rpm high-performance high-torque spindle (optional) - High vibration resistance and thermal stability - Excellent price-performance ratio - Suitable for roughing, finishing, and one-shot machining in various applications - Ideal for medium-sized components and molds made from a wide range of materials Machine Specification: High-Speed Double-Column Machining Center DA17L8Q with FANUC 0i Control Travel: X-axis: 1700 mm Y-axis: 850 mm Z-axis: 700 mm Distance between columns: 1700 mm Spindle nose to table surface: 100–900 mm Precision: Positioning accuracy: 0.008/0.006/0.006 mm X/Y/Z: Repeatability: 0.005/0.004/0.004 mm X/Y/Z: Table: Djdov I Ucdepfx Ap Ijkt Table size: 1500 x 850 mm Max. load: 3000 kg T-slots on table: 5 x 18 x 160 (mm) Spindle: Drive type: Direct drive (built-in spindle) Max. speed: 6,000 rpm Power: 15/18.5 kW Torque: 182/224 Nm Tool holder: BT50 Pull stud: P50T-II-MAS403 Feed Rates: Rapid traverse X/Y/Z: 24/24/15 m/min Cutting feed rate: 20/20/10 m/min Tool Magazine: Capacity: 24 stations Type: ISO7:24NO50 Max. tool diameter (adjacent free/full): Ø110/Ø200 mm Max. tool length: 300 mm Max. tool weight: 20 kg Index time (tool-to-tool): 2.9 sec. Other: Working pressure: 5–7 bar Machine weight: 14.6 t Dimensions (LxWxH): 4000 x 4200 x 4300 mm Standard Configuration: Control: FANUC 0i Constant spindle temperature cooling system Z-axis hydraulic counterbalance Pneumatic, hydraulic, lubrication systems Tool cooling Internal automatic chip conveyor External chain-type chip conveyor Fully enclosed guarding with closed top 3-color signal lamp Work area lighting Standard accessories and documentation Toolbox CE certified Options Control: Mitsubishi M80 HISION 8000 rpm built-in spindle Spindle ring cooling 24/30/40-position magazine Column height extension 200/400 mm (customized heights) Through-spindle coolant (20/30/70 bar) Glass scales on all axes NC rotary table Electrical cabinet air conditioner Manual right-angle milling head Workpiece measurement Tool measurement Water gun / air gun Oil skimmer

Tilstand: brukt, Byggeår: 1985, Bore capacity in steel (diameter): 40 mm Throat depth: 300 mm Quill stroke: 180 mm Spindle speed: 55–1450 rpm Feed: 0.1–0.3 mm/rev Machine no.: 5112 Table size: 620 x 470 mm Spindle taper: MT 4 - Infinitely variable drill spindle speeds with back gear - 3 automatic feeds: 0.1 / 0.2 / 0.3 mm/rev - Coolant system - Tapping attachment - Drive: 400 V, 1.4/2.2 kW - Required space approx. W 620 x H 1900 x D 950 mm - Weight approx. 450 kg The technical data are as provided by the manufacturer or operator and are therefore not binding for us. Interim sale reserved; exclusively our terms and conditions of business and sale apply. About us - Over 400 machines in stock - More than 15,000 m² storage area, crane capacity 70 t Dsdpfsyqvlcsx Ap Iskt - Over 10,000 accessories for your workshop If you wish to sell machines, production lines, or your entire operation, please contact us. You will find more offers on our website. Inspections possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Tilstand: ny, Byggeår: 2025, dreiehøyde: 2 000 mm, emnevekt (maks.): 12 000 kg, frontplatens diameter: 2 000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø 3,000 mm Max. turning height: 2,000 mm Table speed: Max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (vertical ram): 1,200 mm Drive spindle speed: Max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical traverse path): 1,000 mm 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: new 240 TCR-01 (2 units) Splash guard: table version (R-type standard design) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge type 4-jaw independent hand chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical documentation Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic Tool Changer (ATC) 24 positions – on request Automatic shutoff for N.C – on request Turning tool holder type 240TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Linear scales X-, Z-axis – on request Rigid tapping – on request Automatic Tool Changer (ATC) 24 positions – on request Other: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING – not included in the price INSURANCE AND FREIGHT – not included in the price Errors in technical data excepted. The scope of accessories applies exclusively and only as described in the textual article description. No claim exists for accessories shown for visual purposes only. Dedexqb D Nopfx Ap Ijkt The general terms and conditions of JS Werkzeugmaschinen GmbH apply.

Tilstand: svært god (brukt), PLATE PANEL SAW WITH ANGULAR SYSTEM Control: OSI Plus – Optiplanning software Number: 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st Infeed saw with grippers (No.): 5 Panel rotation unit (for boards) by 90° 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter) approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1–170 Shear for waste cutting Djdpfxjukhd Ae Ap Ijkt 2nd Infeed saw with grippers (No.): 10 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter) approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1–170 No. 2 front air cushion tables (mm: 2200 x 1500) Automatic unloader (bridge-type) for cut panels – “RBO (BIESSE)” model Lifter with 6 stacking stations

Tilstand: svært god (brukt), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Loading Gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 Djdpfxslikvhj Ap Iokt X04004B) Turning Device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-Off Saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Sorting Station "BARGSTEDT" X04004E) Double-sided Sizing and Edge Banding Machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling Machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling Machine "WEEKE" Model BST 500 D X04004H) Turning Device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorised Belt Transfer "HOMAG" TR 10/70/12 X04004L) Cut-Off Saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking Gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Tilstand: svært god (brukt), AUTOMATIC MULTI-BORER "WEEKE" Machine can be aligned in a production line and connected with other machines. Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support: 2 Spindles per horizontal drilling unit: 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support: 2 Spindles per lower vertical drilling unit: various Upper vertical drilling supports (qty): 2 Spindles per drilling unit on upper supports: 2 Dksdpfxeh Ryhns Ap Ijt Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital position display (axis) Total connected load (kW): 26

Tilstand: svært god (brukt), MEMBRANPRESSE For laminating MDF-shaped panels with PVC, PP, and PET equipped with VARIOPIN fully automatic substructure system Automatic frontal loading/unloading and preparation table (double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions: 1500 x 2800 mm Usable working area: 1250 (or 2 x 600) x 2550 mm Front loading side from 1500 mm (Usable width 1250 mm) Separate control cabinet and controls (with electronic programming device) SIEMENS SIMATIC Touch Panel Installed total power: approx. 50 kW Dkodpfxerwxz Ro Ap Ijt OPTION "Paternoster" roll magazine Unwinder (roll holder) with film cutting system

Tilstand: svært god (brukt), PLATE PANEL SAW WITH REAR LIFT TABLE FEED Control: Power Concept Software: CADmatic 4 Professional Lift Table Feed (mm): 4300 x 2200 No. 2 Rear Pushers (TWIN PUSHER) Model: POWER CONCEPT With Clamping Jaws Feeding Device for Thin Panels (Minimum Thickness mm): 3 Max. Cutting Width (mm): 4300 Useful Stroke of the Pusher (mm): 4300 Max. Saw Blade Projection (mm): 95 (automatic) Scoring Saw (Max Blade Diameter / Power): 180 mm / 2.2 kW Main Saw (Max Blade Diameter / Power): 380 mm / 13.5 kW (Max 18) Adjustable Saw Carriage Feed (m/min): 1 - 150 Dkedpfeimr Icex Ap Iot Front Air Cushion Tables (qty): 4 Total Connected Load (kW): 28 OPTION: - Cut Rite Software (optimization) CUTTING PROFI (T) PACKAGE: PRACTIVE - Label Printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Tilstand: ny, Byggeår: 2026, driftstimer: 1 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: EY-R33Y, totalvekt: 1 275 kg, drivstofftype: diesel, tankkapasitet: 315 l, farge: grønn, effekt: 32,07 kW (43,60 hk), utgangsstrøm: 47 A, utgangsspenning: 400 V, utgangsfrekvens: 50 Hz, type utgangsstrøm: trefaset, nominell effekt: 29 kW (39,43 hk), nominell (tilsynelatende) effekt: 36 kVA, kontinuerlig effekt: 26,4 kW (35,89 hk), kontinuerlig tilsynelatende effekt: 33 kVA, total lengde: 2 550 mm, total bredde: 1 037 mm, total høyde: 1 605 mm, rotasjonshastighet (maks.): 1 500 o/min, motordesigner: Yanmar, type kjøling: vann, Energigenerator EY-R20K utleieversjon Den robuste Energy Generator EY-R33Y er et kraftig Yanmar 33 kVA dieselaggregat og er tilgjengelig for salg hos Aggregaat.store/Van Delft Staal. Aggregatet er utviklet for byggeplasser, med stabil strømforsyning ved enhver strømbrudd. Takket være den moderne Yanmar dieselmotoren oppfyller denne generatoren krav til minimale utslipp og optimalt drivstofforbruk. EY-R33Y er utstyrt med AVR-teknologi (Automatic Voltage Regulation), som sikrer jevn spenning – ideelt for tilkobling av sensitivt utstyr. Denne dieselgeneratoren opererer stillegående, effektivt og er konstruert for langvarig driftssikkerhet – akkurat det du forventer fra Aggregaat.store/Van Delft Staal, forhandler av ENERGY Pure Power. Fordeler: - Effekt: 20 kVA / 16 kW PRP - Effekt: 22 kVA / 17,6 kW LTP - Kraftig ytelse - 1500 rpm - AVR-system for stabil spenning - Stillegående, drivstoffgjerrig og lett å vedlikeholde - ATS-forberedelse, kontakt, og valgfri ATS-styringsboks Dodpfx Apoy S Tnxo Iekt - Perfekt som reserveaggregat ved strømbrudd eller for mobil strømforsyning Vi tilbyr også full service og reparasjoner. Alle aggregater leveres start- og driftsklare. Lagervare. Aggregaat.store/Van Delft Staal – din partner for pålitelig energi, når og hvor du trenger det.