Kjøp brukt Yanigav Horizontaler Pfahlspalter Fbh210 (188)

Tilstand: ny, Byggeår: 2025, Schneider Compressor UNM 510-10-90 D A714000 Rjdpebyhvrefx Airscd Mobile piston compressor with horizontal tank Standard delivery includes all safety fittings, electric power cable with plug, and Condor pressure switch Compressed air tank equipped with safety valve, tank pressure gauge, and condensate drain valve Welded rear handle improves loading and transport capability Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch High-grade features for universal use With V-belt drive, 2 in-line cylinders for especially smooth operation, and 400 V three-phase motor with external motor protection Low compressor speed ensures longer component life, reduced noise level, and minimized vibrations Large fan flywheel for optimal cooling Includes filter regulator for controlled compressed air, cleaned of condensate, dirt, and oil Comes with 2 m device power cable with rubber coating and air outlet via quick coupling Device power cable with phase inverter 10-year warranty on the tank against rust-through Technical Data Pressure 10 bar Intake capacity 510 l/min Filling capacity 390 l/min Speed 1240 rpm Tank volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (W x D x H) 1070x495x895 mm Drive power 3.0 kW Voltage 400 V Location: Available from stock Bitburg Subject to prior sale

Tilstand: brukt, Slot spindle 1 0 Number of milling units: 2 pcs Spindle diameter: 40, 50 mm Pos. 1: Okoma angle combination UF1 S and Pos. 2: Rebate machine UF2 EG Incl. Pos. 3: Tooling IV78 wood, IV78 wooden house doors, IV78 wood-aluminium windows Gutmann with straight and slanted cheek For sale on behalf of a customer ----- Technical Manufacturer Description: Pos. 1: Okoma UF 1 S slot and profiling machine - rebate machine ----- Compact, heavy-duty window production machine in cast iron design, consisting of: Cross-cut saw operating from above with 12 turret stops, mechanically guided guard for accident prevention Slot spindle, 40 mm diameter x 252 mm, double stroke for 3 tool stations (stroke height 83 mm), Motor 7.5 kW Roller table adjustable on both sides 0-60 degrees automatic feed with various steplessly adjustable feed speeds, double pneumatic clamping, length stop LAS 3-fold system 2300 mm automatic transfer to profiling section Profile spindle 40 mm diameter x 252 mm pneumatic stroke 112 mm (adjustable) for 2 tool stations Motor 7.5 kW, spindle horizontally adjustable at tool run-off edge, front milling fence jaw adjustable Glazing bead saw with 3 kW motor, 4-position turret head adjustment, heavy-duty articulated feed, feed rate steplessly adjustable 0-25 m/min. roller groups swiveling inwards and outwards, back stop with 5-position turret head Frame milling device ----- Pos. 2: OKOMA Rebate Automat Model UF 2 EG ----- Energy data: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: air consumption 13 NL/cycle pressure: 8 bar prepared air: according to Pneurop 6611 1. Profile spindle 1: - Spindle arrangement: right - Power: 11 kW - Speed: 7,000 rpm - Rotation: clockwise and counterclockwise - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-movement of profile spindle - Vertical positioning Drive: pneumatic cylinder, 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder forward-backward Position indicator: limit switch - Automatic plunge: Plunge speed adjustable for tear-free rebating - Safety and extraction hood with connection spigot, 140 mm diameter 2. Profile spindle 2: - Spindle arrangement: right - Power: 11 kW - Speed: 7,000 rpm - Rotation: counterclockwise - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-movement of profile spindle - Vertical positioning Drive: pneumatic cylinder, 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder forward-backward Position indicator: limit switch - Safety and extraction hood with connection spigot, 140 mm diameter 3. Hardware milling device EG: - Spindle arrangement: right - Drive: 3 kW three-phase motor Redoy T R Tbjpfx Airocd - Speed: 6,000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: none - Horizontal positioning Drive: pneumatic cylinder forward-backward Position indicator: limit switch (only at rear) - Safety and extraction hood with connection spigot, 80 mm diameter Stops: - 1st stop: in front of spindle 1, manual chip removal, quick adjustment via parallelogram - 2nd stop: between spindles...

Tilstand: ny, Byggeår: 2026, RD 700 VARIO radial drill is built on a robust column-type structure, ensuring stability and vibration resistance. The radial arm allows for precise positioning of the drill head at a range from 300 to 700 mm relative to the column, and a quill travel of 130 mm enables convenient drilling in a single setup. Key Components Spindle: Morse taper MK3 with drawbar, stepless speed adjustment, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW power, 400 V supply, suited for continuous operation. Table and base plate: Cubic table 250×250×250 mm and work plate 900×620 mm with T-slots. Precision and work efficiency Thanks to stepless speed regulation and digital parameter indicators, the RD 700 VARIO provides high accuracy and repeatability of machining. Automatic feed and tapping mode shorten production cycle times, while the stable construction minimizes vibrations, extending tool life. Application The RD 700 VARIO CORMAK radial drilling machine is suited for mechanical workshops, toolrooms, production facilities, and maintenance departments. Ideal for machining steel components, welded structures, machine parts, and industrial components. Standard equipment Cubic table Base Drill chuck 3–16 mm / B18 Arbor MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable safety guard Basic tool set Safety covers Polish-language technical documentation (DTR) CE certificate Technical data Parameter Value Max. drilling capacity 32 mm Max. tapping capacity M22 Spindle taper MK3 Min. spindle speed 75 rpm Rcedpoyccn Usfx Airsd Max. spindle speed 2500 rpm Speed change Stepless (75–438 / 438–2500) Automatic spindle feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm with head travel 505 mm Horizontal drill head travel 400 mm Quill travel 130 mm Column diameter 150 mm Cubic table size 250 × 250 × 250 mm Base work surface 900 × 620 mm Motor power 1.5 kW Supply voltage 400 V Dimensions – width 1220 mm Dimensions – depth 640 mm Dimensions – height 1750 mm Weight approx. 722 kg

Tilstand: brukt, Byggeår: 1973, maskin-/kjøretøynummer: 959, Horisontal båndsag / Horizontal bandsag Jllig TS 100 V Årsmodell / Year 1973 - Serienr. 959 Arbeidsbredde maks. 590 mm Ekstra sagblad / Reserve båndsagblad Trinnløs høydejustering av sagbåndet Trinnløs regulering av drivverket Online video-inspeksjon via Skype-video Vi vil gjerne ønske deg velkommen – flere maskiner på lager Rcedpfxjrmul Se Airjd Umiddelbart tilgjengelig – kan inspiseres På lager i Emskirchen / Nürnberg – kan prøves

Tilstand: brukt, Buntpresse / buntpress - horisontal La Fornigrafica BP Hydraulisk horisontal buntpresse / hydraulic horizontal bunch press Pressetrykk trinnløst justerbart / Pressure steplessly adjustable 0 – 2.500 kg Rsdpsh R Udwefx Airscd Innmating lengde / infeed length maks. 820 mm Pressplate størrelse / press plates size 340 x 260 mm Online videoinspeksjon via Skype-video Vi vil sette pris på ditt besøk – flere maskiner på lager Tilgjengelig umiddelbart – kan inspiseres På lager i Emskirchen / Nürnberg – kan testes

Tilstand: brukt, Buntpresse / Buntpresse - horisontal Tränklein BP Hydraulisk horisontal buntpresse. Pressetrykk trinnløst justerbart / Trykk trinnløst 0 – 2.500 kg Innlengde / Innmatingslengde maks. 770 mm Pressplate-størrelse / Pressplate-størrelse 290 x 220 mm Online-videoinspeksjon via Skype-video. Vi vil være veldig glade for å få besøk av deg – flere maskiner på lager. Tilgjengelig umiddelbart – Kan inspiseres. På lager i Emskirchen / Nürnberg – Kan testes. Rjdpfx Ajiwg A Ejirjcd

Tilstand: god (brukt), Keyence Type: VR-6200 + VR-6000 Technical Data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel range: 278 mm × 134 mm Z travel range: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Image sensor: 4-megapixel CMOS, monochrome Macro mode: Magnification (on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measurement range Without Z image composition: Macro mode: 10 mm Micro mode: 1 mm With Z image composition: Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without Z image composition: 0.4 μm *1 Rcjdszgr D Eepfx Airod With Z image composition: 1.0 μm *1 Measurement accuracy Without Z image composition: ±2.5 μm *1 With Z image composition: ±4.0 μm *1 Only 50 operating hours! With software CD, without PC! Condition: (like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (as shown!) (Subject to modifications and errors in the technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Tilstand: ny, Byggeår: 2023, maskin-/kjøretøynummer: MR005937, Universal drill and slot milling machine, CNC-controlled. Easy to operate, compact, and fast in processing, this machine is equipped with the following options: - Panel end sensor - Z-axis pressure boost (recommended for hard materials) - Maestro CNC software - Keyboard type: QWERTY Rcsdpfx Aiowy U A Hersd - Cooling fan for control cabinet - Automatic lubrication system Technical specifications: - Minimum panel thickness: 10 mm - Maximum panel thickness: 50 mm - Minimum panel length: 300 mm - Maximum panel length: 3000 mm - Minimum panel width: 90 mm - Maximum panel width: 900 mm - Positioning speed: 20 m/min - Number of vertical drilling spindles: 7 pcs - Number of horizontal drilling spindles (Y-axis): 2 pcs - Number of horizontal drilling spindles (X-axis): 2 pcs - Integrated grooving saw blade: Yes - Saw blade diameter for grooving: 125 mm - Motor power: 3 HP - Serial number: KK00039354

Tilstand: god (brukt), Byggeår: 2019, driftstimer: 12 000 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 7105, matelengde X-akse: 16 500 mm, matinglengde Y-akse: 1 300 mm, emnevekt (maks.): 1 000 kg, klippehøyde (maks.): 300 mm, total lengde: 45 300 mm, total høyde: 5 700 mm, kuttebredde (maks.): 1 300 mm, total bredde: 16 800 mm, styreskapets bredde: 730 mm, sagbladets diameter: 800 mm, totalvekt: 31 000 kg, styreskapets lengde: 4 500 mm, styreskapshøyde: 2 500 mm, arbeidslengde: 20 000 mm, arbeidsbredde: 13 000 mm, Utstyr: sikkerhetslysbarriere, HUNDEGGER K2-Industry 1300 full-automatic joinery machine consisting of: 1 ABM-I125 1 K2-Industry 1300 basic configuration, including: - 13 kW saw unit - Automatic beam turning station - Operator panel and control cabinet - Safety features 2 ROB-2500 1 Hundegger production software CAMBIUM 3 ABM-1272 1 Machine frame K2-Industry 1250 - 15.40 m 4 ABM-BO13 1 Transport and positioning system “two-hand operation” – with servo drive in positioning carriage 5 ABM-3061 1 S-axis universal milling unit (UF5) with 15 kW motor 6 HH-8562 1 Remote maintenance for base machine 7 ABM-1232 1 Machine frame K2-Industry 1250, special length – price per meter 8 ABM-1816 1 Extension and enclosure of machine perimeter including preparation for floating dust extraction 9 ABM-2151 1 Infeed cross conveyor and drive-in roller conveyor for max. timber length 20 m (8 strands), including servo motor 10 ABM-2800 1 Zero stop for pre-extended components 11 ABM-2851 1 Raw timber holder in front of universal saw (multi-length machining) 12 HH-8501 1 Lifting and lowering safety impact plate – infeed roller conveyor 13 ABM-3401 1 Horizontal saw 11 kW (saw blade max. 900 mm) 14 ABM-3651 1 Vertical revolver milling unit (top-mounted) 15 ABM-5550 1 Universal cutter UBF 280 16 ABM-BO41 1 Combination support for vertically operating tools (Y-axis electric) 17 ABM-5091 3 Drilling unit 3.0 kW hydraulic – vertical drilling direction 18 ABM-5400 2 Vertical finger jointing cutter 5.5 kW 19 ABM-B61 1 Combination support for horizontally operating tools 20 ABM-5030 1 Drilling unit 2.2 kW – horizontal drilling direction 21 ABM-5220 1 Swiveling drilling unit 45° (3.0 kW) – horizontal drilling direction 22 ABM-5751 1 Slotting unit 7.5 kW – on stop side 23 ABM-5500 1 Longitudinal and transverse groove cutter 24 ABM-5776 1 Slotting unit 7.5 kW – operator side with pre-positioning (Y-axis) 25 ABM-4101 1 Double combination support – (stop and operator sides) 26 ABM-5041 4 Drilling unit 2.2 kW with hydraulic feed for double combination support 27 ABM-6000 1 Rear marking device (stop side) 28 ABM-6040 1 Front marking device (operator side) 29 ABM-6100 1 Bottom marking and labeling device 30 ABM-6180 1 Rear marking and labeling device (stop side) 31 ABM-6300 1 InkJet 4 HP system – stop side 32 HH-8610 1 Label printer on operator panel 33 ABM-2900 1 Timber extraction hood = flap for removing short parts at the under-table cross-cut saw 34 HH-8640 1 Surcharge for movable operator panel on rollers 35 HH-8645 1 Direct planer machine interface 36 ABM-7750 1 Line laser for component referencing 37 ABM-8050 1 Additional timber deposit point 38 ABM-8300 1 Top feed roller 39 ABM-8416 14 Powered extension roller conveyors with raisable/lowerable rollers, max. width 1300 mm 40 HH-8521 1 Lifting and lowering safety impact plate – outfeed roller conveyor 41 AH-9001 2 6-strand cross transfer conveyor with wide flat link chain HUNDEGGER Pick & Feed System Designed for the following workpiece dimensions: Rsdsza Ehrepfx Airocd Length: 2,000 – 15,000 mm Width: 100 – 680 mm Thickness: 60 – 300 mm Max. part weight: 400 kg Max. output: 1 cycle every 1.5 min Stack dimensions: Length: 2,000 – 15,000 mm Width: up to 1,200 mm Height: up to 1,200 mm Consisting of: Pos. 1 Lifting gate and package infeed Pos. 2 Portal system with vacuum gripper Pos. 3 Stake storage Pos. 4 Safety equipment Pos. 5 Stack pattern input assistance Pos. 6 Increased max. workpiece weight 1000kg

Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, total bredde: 1 860 mm, total lengde: 2 800 mm, total høyde: 910 mm, totalvekt: 600 kg, garantiperioden: 12 måneder, SKJÆREBORD – FOR MANUELL GLASSKJÆRING – NY MODELL: SDRM FULL Årsmodell: 2026 - fabrikkny UTSTYR FOR GLASSKJÆREBORD: - Manuelt uttrekkbare støttearmer for vertikal lastning (dekket med utskiftbare kuber av asketre), - 4 svinghjul Ø80 av polyamid, beregnet for svært høy belastning, for flytting av bordet, - 4 høydejusterbare ben, muliggjør horisontal justering av bordet på arbeidsplassen, - Bordplateoverflate: høybestandig svart filt, - Bordplatekant dekket med freste lister av asketre, - Nedre bjelke i rammen fylt med vibrasjonsbetong inkl. stålarmering og spredt armering av polypropylenfibre for å sikre stabilitet og stivhet i konstruksjonen. - Helling og justering (vertikal/horizontal posisjonering av platen) ved hjelp av pneumatisk sylinder inkl. hydraulisk hastighetsregulator, - Pneumatisk aktiverte brytelister (for langsgående og tverrgående deling) betjent via fotpedal; fotpedal er plassert på en - Luftpute med innebygd høytrykksturbine gjør det mulig å håndtere tunge glassplater på bordflaten (turbinen aktiveres ved en fotpedal på styrepanelet og via to ekstra brytere montert på bordplaten; luft blåses inn under glassplaten og reduserer dermed friksjonen betydelig), - Utskyvshøyden til brytelistene over bordplaten kan justeres. TEKNISKE HOVEDDATA: Vekt: 600 kg Bordplate dimensjoner: 280 cm x 186 cm Høyde: 91 cm (justerbar +/- 2 cm) Strømtilkobling: 16 A 5-pin kontakt Trykkluftkobling: standard 7,2 NW Driftstrykk (luft): 7 bar Turbineffekt: 2,2 kW Spenning: 400 V 50 Hz MEDFØLGENDE DOKUMENTER: - Samsvarserklæring (maskinen er i henhold til maskinforskrifter) - CE-merking - Samsvarserklæring EMV-direktiv - 12 måneders garanti Rcodpfxsh D Rnho Airsd - Bruksanvisning (på polsk og engelsk)

Byggeår: 1987, Tilstand: brukt, x-travel 2800 mm y-travel 800 mm z-travel 1300 mm Machine weight approx. 3 t S T I E F E L M A Y E R Manually-operated 3D measuring and scribing machine Type: System C-100 Year of manufacture: 1987 Measuring stand no.: 314 710 87 _____ Rcedpfx Aiot Hw I Norod Working area: X-axis (horizontal) approx.: 2,800 mm Y-axis (crosswise) approx.: 800 mm Z-axis (vertical) approx.: 1,300 mm Size of worktable: 3,500 x 1,000 x 360 mm Working height above floor: 750 mm Mounted rotary table, rotatable: 800 mm Cross-sections of measuring carriage: 100 x 100 mm or 60 x 60 mm Height of worktable above floor: 700 mm Thickness of worktable approx.: 360 mm Overall height of the measuring machine: approx. 2,800 mm Weight approx.: 3,000 kg Special equipment / Accessories: • Side-mounted measuring carriage system C with cross-section 100 x 100 mm or 60 x 60 mm for Y-measuring arm • Mounted rotary table with vernier display 0 – 360°, also easily removable • Integrated measuring counter Type MZ 2000, digital display with network connection and RS232 interface • 2 longitudinal stops as workpiece stoppers, approx. 2,400 mm long • 6 height-adjustable leveling feet • Swivelling storage tray, comprehensive scribing accessories • RENISHAW measuring probe Condition: good – available ex stock, under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Additionally, we have other measuring machines and measuring plates in various sizes in stock. Please enquire with us.

Tilstand: brukt, Byggeår: 1970, Bore capacity in steel (diameter): 32 mm Reach: 1,000 mm Max. workpiece height: 1,400 mm Total power requirement: 6 kW Machine weight approx.: 3,700 kg Space requirement approx.: [ ] m W E B O Radial drilling machine Model: BR 32 V Year of manufacture: ca. 1970 Serial no.: [ ] Drilling capacity in grey cast iron/steel (solid material) max.: 40 / 32 mm Boring (with 50% pre-drilled): 60 / 80 mm Arm reach approx.: 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds (3 steps/infinitely variable): 60 – 1,850 rpm Base plate: 1,200 x 930 mm Installation height under spindle: 200 – 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal adjustment of drilling carriage: 1,640 mm 9 drilling feeds: 0.06 – 1.0 mm/rev Spindle drive approx.: 3 / 4 kW Total drive: 6 kW – 380 V – 50 Hz Weight approx.: 3.7 t Accessories / Special features: • Manual mechanical clamping of arm and drilling head via hand lever • Automatic drilling feed with depth end-stop via Vernier scale • Infinitely variable speed control within three gearbox ranges and 2 motor speeds, adjustable by hand lever • Forward and reverse rotation • Electro-motorised height adjustment of the arm via cross switch • Ammeter for drilling motor • Coolant system with integrated coolant pump • Fixed drilling table approx. 800 x 600 x 600 mm high, machine vice, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Rcsdpet H Smyefx Aired Condition: older, but good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – payment due upon receipt of invoice

Tilstand: brukt, Byggeår: 1997, Wheel diameter – max. 215 mm Wheel width – 40.65 mm Module – max. Total power requirement: 20 kW Machine weight approx. 10 t GLEASON (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model: PHOENIX HG 200 Year of manufacture: 1997 Max. outer diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Tooth count range: 5 – 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51 – 190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0 – 30 rpm Workpiece spindle bore (tapered): 3 29/32 inch Total drive power approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Features: • FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters • Large, sophisticated cooling system with filter unit, belt filter, etc. • Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle • Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel offers advantages in terms of heat generation and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be produced in high quality, consistent accuracy, at low cost and with short setup times. For further details refer to the brochure copy on our website. Condition: Very good – available for demonstration under power Delivery: Ex stock – as inspected Payment: Net, payable on receipt of invoice We look forward to your order. Other gear cutting machines in stock at all times. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0 – 30 rpm Workpiece spindle bore (tapered): 3 29/32 inch Total drive power approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Features: Rcjdpfx Ast Hwxheirjd • FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters • Large, sophisticated cooling system with filter unit, belt filter, etc. • Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle • Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel...

Tilstand: brukt, Bore diameter: 165 mm Stroke: 120 mm Center height: 100 mm Total power requirement: 1.5 kW Machine weight approx.: 1 t Manufacturer: SUNNEN (USA) Horizontal Automatic Honing Machine Model: MBC 1804 G Year of manufacture: 1K1-90075 Honing range – Ø - with measuring control: 1.5 – 51 mm Rjdpfxew U U Iqj Airjcd - with automatic stroke: 1.5 – 95 mm - with manual stroke: 1.5 – 165 mm Max. workpiece length: approx. 400 mm Max. workpiece length with measuring control: 254 mm 12 spindle speeds: 200 – 2,500 rpm 5 stroke rates: 80 – 310 strokes/min Stroke length with automatic stroke: 6 – 120 mm Drive for honing spindle/stroke motor: 0.75 / 0.37 kW – 380 V – 50 Hz Total power approx.: 1.5 kW – 380 V – 50 Hz Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shut-off when the target diameter is reached. • Electro-mechanical measuring control opposite the tool spindle, accepts a measurement probe to the target diameter, initiating automatic shut-off. • Infinitely adjustable expansion pressure • Foot switch for manual operation • Built-in honing oil supply • Operating manuals included. Unfortunately, no tool holders or other accessories available. Condition: Very good! Suitable for all honing tasks! For a video of the machine, please click here shortly. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Tilstand: brukt, Byggeår: 1992, Wheel diameter - max. 150 mm Wheel width 300 mm Rcsdpfjt Hwxbox Aired Module - max. 4.5 Module - min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading system, type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter for automatic loading max. 150 mm Workpiece Ø for manual loading max. 200 mm Max. workpiece length approx. 400 mm Hobbing length, axial (Z-axis) 300 mm Module range HSS/HM cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool/workpiece min./max. 0 - 190 mm Workpiece speed max. 0-350 rpm Hob slide swivelling left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter speeds stepless 0 - 1,500 rpm Feed rates all axes steplessly adjustable 3.5 or 4 m/min. Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON - CNC control type 788- (BWO) with screen for a total of 8 axes (ABC and WYZ and WV) with dialog programming for creating various gearing cycles, for example, helical gearing, worm and worm wheel gearing, crowned gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shifting travel, also for 2 cutters, with quick-clamping system and hydraulic counter bearing, Workpiece spindle head (C) with quick-clamping system (collet), Heavy-duty tailstock with 420 mm travel (W), in conjunction with an automatic workpiece loading device made by GÜDEL (Switzerland) with linear gantry loader approx. 1000 mm stroke (V), pivoting double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm long x 25 Ø x module 1.5), but without workpiece stacking device. Separate coolant unit with magnetic chip conveyor, elaborate full enclosure with sliding doors, 2 machines with workpiece marking unit by BORRIES, unfortunately otherwise no accessories

Tilstand: brukt, Bore capacity in steel (diameter): 23 mm Spindle taper: MT 2 Spindle stroke: 130 mm Throat (approx.): 860 mm Table size: 1280 x 500 mm Clamping area (approx.): 1250 x 480 mm Speed range: 115 - 2400 rpm Max. workpiece height (approx.): 535 mm Drill chuck: Quick-action chuck 1-13 mm Machine weight (approx.): 690 kg Total power requirement: 1 kW Dimensions (L x W x H, approx.): 1300 x 1800 x 2100 mm Distance spindle center to column center (throat): approx. 860 mm Distance table to quill (max. workpiece height): 535 mm Adjustability of arm horizontal/vertical: approx. 300 - 400 mm Redswugrcopfx Airecd

Tilstand: god (brukt), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical specifications of the workbench frame: Manufacturer: Dexion Type: P 90 Scope of delivery includes: 02x workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Including horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted construction) 04x workbench crossbeams, used Colour: orange Beam profile: I-section 120 x 50 mm Clear width: 3,000 mm 08x safety pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against unintentional removal Note: - Images are for illustrative purposes only. Rcjdpfx Aeth N Shoirod - Colour of materials may vary. - Workbench frames are delivered as kits, not assembled. - Uprights are pre-assembled. - Usual production lead time is about 3-5 working days. You can also purchase workbench frames with the following alternative depths from us: Workbench frame 3,180 x 700 mm / 2 levels / (€184.00 incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (€186.00 incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (€188.00 incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (€190.00 incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (€192.00 incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (€194.00 incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (€198.00 incl. 19% VAT) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information for this item: This item is offered for collection only. Any additional transport or shipping of this item incurs extra costs, which can be quoted separately depending on the delivery location or the extent of the order.

Tilstand: god (brukt), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical specifications of the workbench frame: Manufacturer: Dexion Type: P 90 Scope of delivery includes: 02x workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Including horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted construction) 04x workbench crossbeams, used Colour: orange Beam profile: I-section 120 x 50 mm Clear width: 3,000 mm 08x safety pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against unintentional removal Note: - Images are for illustrative purposes only. - Colour of materials may vary. - Workbench frames are delivered as kits, not assembled. - Uprights are pre-assembled. - Usual production lead time is about 3-5 working days. You can also purchase workbench frames with the following alternative depths from us: Workbench frame 3,180 x 700 mm / 2 levels / (€184.00 incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (€186.00 incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (€188.00 incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (€190.00 incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (€192.00 incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (€194.00 incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (€198.00 incl. 19% VAT) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information for this item: Redpjthi Husfx Airjcd This item is offered for collection only. Any additional transport or shipping of this item incurs extra costs, which can be quoted separately depending on the delivery location or the extent of the order.

Tilstand: klar til bruk (brukt), Byggeår: 2024, Funksjonalitet: fullt funksjonell, Gantry portal milling machine / Manufacturer: WALDRICH SIEGEN / Type: PF-S-150 - 1953: Original year of manufacture (originally a planing bed) - 1974: Converted by manufacturer WALDRICH SIEGEN to a portal milling machine (completely new milling support) - 2001: Upgraded to CNC, with new switchgear - 2015: NC drive conversion for the table - 2024: Conversion of crossbeam drive (gantry) Machining capabilities: - Milling/drilling operations: each horizontal/vertical The machine can be inspected under power by appointment. Condition: Operational. TECHNICAL DATA / DESCRIPTION: Travel axes (CNC): - Table: 14,000 mm - Crossbeam support: 4,500 mm - Crossbeam: 4,000 mm - Column clearance: Width 4,545 mm - Clear span: 4,200 mm - Build height table to spindle: 4,000 mm - Quill stroke: 450 mm Redeyz Ru Ujpfx Airjcd - Table size / clamping area: 14,000 x 4,350 mm - Table load: max. 200 t (10 t point load) - Main spindle motor power: 125 kW - Total machine weight: approx. 350 t - Space requirement, total machine: Length 40 / Width 10 / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Further extensive equipment ... No guarantee for completeness and correctness of technical data and equipment. - Subject to prior sale -

Tilstand: ny, Universalfres med variabel hastighet på vertikal akse. Horisontal spindelhastighet justerbar via kilerem. Maskinen leveres inkludert: - Digital avlesning på 3 akser (Sino) - Mating på langsgående og tverrgående bord - Trekkstang M16 - Spannhylsesett - Borkurv 3–16 mm inkl. ISO40 B18-opptak - Spannhylse ISO40-MC3 - Spannhylse ISO40-MC2 - Kjølepumpe - Arbeidslampe - Horisontalaksel ISO40 – Ø22/Ø27 - Hammerhodet bolter M14x55 (for feste av tilbehør på bordet) Merke: KMS Type: VF 420 Vario Spindelopptak: ISO 40 Spindelhastigheter: Rcedpfxsg Ul Nze Airod - Vertikal: Variabel (100–600 / 350–2000 o/min) - Horisontal: 9 trinn (600–1350 o/min) Avstand vertikal spindel – søyle: Justerbar 250–650 mm Avstand vertikal spindel – bordoverflate: 60–360 mm Avstand horisontal spindel – bordoverflate: 20–320 mm Spindelbevegelse vertikal: 120 mm Bordstørrelse: 1000 x 240 mm Bordbevegelse: 580 x 230 mm Motor: - Vertikal spindel 2,2 kW (3 hk) - Horisontal spindel 1,5 kW (2 hk) Maskindimensjoner: 1500 x 1220 x 2100 mm Maskinvekt: 850 kg Nettspenning: 400V

Tilstand: svært god (brukt), Byggeår: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS cycle-controlled, year of construction 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel X: 500 mm, Y: 430 mm, Z: 400 mm Rcedpfx Aowyn Rqoirsd Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed X and Y: 2 to 1600 mm/min, stepless Feed Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power supply: 400 Volt, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head swivels right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant device beside machine - Control cabinet mounted on the machine - Fixed angle table - Operating manual and circuit diagrams Space requirement (L x W x H): 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We are offering a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tilstand: ny, Byggeår: 2025, matelengde X-akse: 500 mm, matinglengde Y-akse: 400 mm, vandring X-akse: 500 mm, vandring Y-aksen: 400 mm, spindelhastighet (maks.): 2 000 o/min, spindelhastighet (min.): 40 o/min, fjærstrøk: 65 mm, hurtigmating X-akse: 1 200 m/min, hurtig tverrslag Y-akse: 1 200 m/min, hurtigmating Z-akse: 1 200 m/min, total lengde: 800 mm, bordbredde: 400 mm, totalvekt: 1 550 kg, ELMAG Universal Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and efficiency, making them a top choice for metalworking professionals. This ergonomically advanced design impresses with easy handling, infinitely variable speed control, and an excellent price-performance ratio, making it ideal for workshops, training centers, and toolmaking. Standard Equipment - Digital position display - 4 long milling arbors (16, 22, 27, 32 mm) - 3 reducing sleeves (Morse Taper 1, 2, 3) - Operating manual / CE documentation Advantages - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Precision ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in cast base - Digital 3-axis position indicator - Horizontal and vertical milling table - LED table lighting - Vertical milling head with adjustable quill - Central lubrication system included Rjdpfxsy Hlx Es Airscd - Digital spindle speed display - Rapid traverse on all 3 axes - Milling head swivel ± 45° - Swiveling operator panel - Digital position display for maximum precision on all 3 axes - Spindle forward and reverse rotation - Digital speed display - Potentiometer for infinitely adjustable feed axes - Jog switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop button Technical Data Drilling capacity in steel: 50 mm Milling capacity, face cutter: 125 mm Milling capacity, end mill: 40 mm Spindle taper (rotary spindle): ISO 40 Spindle speed range: 40 – 2000 rpm Speed steps: stepless Quill stroke: 65 mm Milling table T-slots / width x pitch: 6 / 14 x 63 mm Vertical table T-slots / width x pitch: 3 / 14 x 63 mm Spindle extension: 180 – 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Quill distance to table: 50 – 450 mm Horizontal spindle distance to table: 145 – 545 mm Milling table area: 800 x 400 mm Table travel X x Z: 500 x 400 mm Vertical table area: 1020 x 225 mm Feeds X/Y/Z: 10 – 1200 mm/min Feed settings X/Y/Z: stepless Motor power: 3700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Electrical connection: 400/50 V/Hz Machine dimensions: 800 x 400 x 450 mm Length x width: 1500 x 1700 mm Height: 2000 mm Weight: 1550 kg The machine is located at our premises in 71334 Waiblingen-Beinstein. It is immediately available and can be inspected upon request. Please arrange an appointment in advance.

Byggeår: 2010, Tilstand: klar til bruk (brukt), Full-automatic finger-jointing line: Type Doppel-Pack The machine has been dismantled The machine will be checked and comes with a function guarantee Specifications: Wood input length: Min.: 150 mm Max.: 1000 mm Average: 400 mm Wood cross-section: Min.: 20 x 40 mm Max.: 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood: 120 cm² Softwood: 150 cm² Finger joint configuration: vertical and horizontal Type of glue: PVAC white glue, double-sided application Electrical connection: Supply voltage: 400 V Control voltage: 24 V 50 Hz System is completely wired up to control cabinet. Finger length, wood cross-section, and type of glue can still be adjusted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided With endless bundling Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Rcedpfsncd Utjx Aired Working height: 960 mm Bundle width: 600 mm Glue application: double-sided (both sides)

Tilstand: klar til bruk (brukt), EN 12285-2/ Kl.B Overground double-walled steel tank Tank interior as-rolled, exterior sandblasted, primed and painted in RAL 7036 (platinum grey) Equipment: Rcjdpfxoy Ur Hxj Airjd - 2 welded steel saddle supports - SGB 330 DL pressure leak detector with air (230V mains supply to be provided by customer), located at the tank crown with weather protection cover - Manway armatures, venting system, PVC dip tube with dipstick - 1" suction line with external thread at the tank crown - 2" filling pipe with TW cap, suction line - 2 spare sockets with manufacturer's test certificate - Welded pump console at the front - Zieglmeier branding - Hot-dip galvanized access ladder - With one crane eye - With one type plate Limit value sensor 23 RO 400mm: Adjustable for above-ground and underground tanks for the storage of heating oil EL according to DIN 51603-1, diesel fuel according to DIN EN 590, and biodiesel fuel according to DIN EN 14214. Suitable for cylindrical horizontal tanks made of steel according to EN 12285-1, EN 12285-2, and EN 6624-1, as well as plastic or other approved materials whose construction and dimensions correspond to the above standards and which are approved for the type of construction. Additionally suitable for cylindrical upright tanks made of steel according to DIN 6619-1, 6623-1. Cable connection box on the limit value sensor. Ref.-Manufacturer-Article number 46125 Packaging unit 1 piece Manufacturer AFRISO Length 400 mm Connection 1" external thread Approval: EMC Directive (2014/30/EU) Weight 0.901 kg

Tilstand: ny, Borediameter variable mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Weight: 1500 kg Dimensions (L/W/H): 4800x1600x2400 mm Width with support: 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on type and configuration, you can: - Drill handle olives in loose frame sections or for finished sashes, with multi-spindle drilling head, quick-changeable, also for milling fittings of lock box for RC2 or intermediate gear units - Drill corner bearings in loose frame sections, with multi-spindle drilling head, quick-changeable, corner-oriented via stop or to dimension (tilt windows) - Drill vertically from above for fittings, pilot drilling for clip on loose frame sections - Mill vertically from above for handle set, profile cylinder, 3D hinge fitting Rcedpfx Aisd Ih Hqorjd - Drill horizontally with 2 drilling units, different bore diameters, dowel drillings on end and longitudinal sides, transoms/mullions, bars, corner connections, front door, etc. - Mill horizontally for lock box / fittings, etc. Machine Description Basic frame: robust welded construction, linear guide for X-axis Table support: 3,000 x 200 mm 6 pneumatic clamping cylinders with automatic retract function 2 side stops for end-face machining, manually swivel in/out 2 longitudinal stops, manually swivel in/out Travel distances: X axis – 3,000 mm usable length Y axis – 180 mm Z axis – 105 mm Units: 1 vertical drilling unit (Unit 1) from above, drilling motor 1.1 kW, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 1 vertical drilling unit (Unit 2) from above, drilling motor 1.1 kW, speed 3,000 rpm, with quick-change drilling head system - 1 Drilling head BKF 3, Olives, quick-changeable - 1 Drilling head BKF 3/2, Corner bearing, quick-changeable 1 vertical milling unit (Unit 3) from above, milling motor 2 kW, 1,500 - 16,000 rpm, collet chuck ER 25 2 horizontal drilling units (Unit 4 and 5) 1.0 kW, 1,500 - 12,000 rpm, collet chuck ER 20 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 - 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control (X, Y, Z) NC positioning controller: Manufacturer B+R – input via 10” TFT display Machine complete with 1 set of drill tools: diameters 6, 8, 10, and 12 mm, 2 roughing/finishing carbide cutters dia. 16 mm, CE compliant, ready for connection Extraction ports: 1 x dia. 120 + 1 x 80 Power connection: 1 x 400 V, 16 Ampere Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right/left with NC axis high/low, programmable control, thus measurement input according to rebate/light size possible Dimensions: LxWxH = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price in above configuration, ex works: on request Plus freight and installation/commissioning (Technical specifications according to manufacturer – subject to change without notice!)