Kjøp brukt Yanigav Horizontaler Pfahlspalter Fbh210 (189)

Tilstand: brukt, Byggeår: 1982, Plate width: 480 mm Plate thickness: 3 mm Stations: 13 Machine weight: approx. 11 t Required floor space: approx. 15 x 2 m Number of stations: 13 Number of straightening stations: 1 Shaft diameter: 60 mm Horizontal shaft distance: 310 mm Vertical shaft distance: 110–250 mm Speed: approx. 11 m/min Connected load: approx. 20 kW Uncoiler (without drive): - Coil inner diameter: 508/610 mm - Coil weight: 3 t Flying hydraulic shear Roll set for hat profile The technical data are based on manufacturer/operator information and are therefore non-binding for us. Prior sale reserved; exclusively our terms and conditions of business and sale apply. About us - More than 400 machines in stock - Over 15,000 m² storage area, crane capacity 70 t - More than 10,000 accessory items for your workshop If you wish to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Inspections possible by appointment. We look forward to your visit. Your Markus Hirsch Team Bjdpfx Aoyqtx Heirslk

Tilstand: ny, maskin-/kjøretøynummer: 85163, System: Electrohydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 ID No.: 85163 Flow rate: 50 m³/h Motor power: 30 kW Motor speed: 1465 rpm Bjdpfx Aod Eyl Nsirslk Piston diameter: 200 mm Suction-side connection flange: DN 125 PN 16 DIN 2633 Discharge-side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feed Suction flow stabilizer: including vacuum breaker 0.5 bar Air supply fittings: on suction and discharge sides, including pressure reducer, solenoid valve, check and throttle valves Other accessories: such as drain cock, pressure gauge, etc. Photo: similar construction The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming, and safe to run dry. The pump flow is energy-efficiently regulated by a variable speed drive depending on delivery pressure using a frequency converter. We also offer our piston diaphragm high-pressure pumps in special tunnel construction versions. Do you have specific requirements? Contact us for a tailored solution.

Tilstand: ny, maskin-/kjøretøynummer: 85162, System: Electrohydraulic Piston Diaphragm Pump (Feed Pump / Filling Pump) NEW! Bljdsd E S Sfspfx Airok Type: Abel CM-G-C262 ID No.: 85162-3 Flow Rate: 10 m³/h Motor Power: 5.5 kW Motor Speed: 1450 rpm Piston Diameter: 130 mm Suction-side Connection Flange: DN 80 PN 16 DIN 2633 Discharge-side Connection Flange: DN 80 PN 40 DIN 2635 Application: Filter press feed Suction Flow Stabilizer: made of steel Suction Crossbeam: 262, made of steel Additional Accessories: such as drain valve, pressure gauge, etc. Photo: similar design The Abel hydraulic diaphragm simplex piston pump in horizontal configuration is double-acting, slow-running, self-priming, and safe for dry-running. The pump flow rate is energy-efficiently regulated via a frequency converter, depending on the delivery pressure, by means of a variable speed drive. We also offer our piston diaphragm high-pressure pumps in special tunnel construction versions. Do you have special requirements? Contact us.

Tilstand: ny, maskin-/kjøretøynummer: 85163, System: Electrohydraulic Piston Diaphragm Pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 ID No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Inlet connection flange: DN 125 PN 16 DIN 2633 Outlet connection flange: DN 100 PN 40 DIN 2635 Bjdpfx Ajd Ey I Ioirolk Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air supply fittings: suction and discharge sides, incl. pressure reducer, solenoid valve, check valves, and throttle valves Other accessories: such as drain cock, pressure gauge, etc. Photo: similar design The Abel hydraulic membrane simplex piston pump in horizontal design is double-acting, slow-running, self-priming, and safe for dry running. The pump's flow is energy-efficiently controlled by a frequency converter that adjusts drive speed according to delivery pressure. Our piston diaphragm high-pressure pumps are also available in a special design for tunnel construction. Do you have special requirements? Contact us.

Byggeår: 2000, Tilstand: brukt, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG). Dear Sir or Madam, We are offering a 100,000-liter double-walled storage tank for the storage of liquid fertilizers as described below. The storage tank is equipped internally with a brand-new plastic inner liner, suitable and resistant for the storage of liquid fertilizer. An acoustic leak detection device is mounted externally in a lockable protective box. In addition, the storage tank itself is also double-walled, made of steel. The plastic inner liner is provided with a general building authority approval and is thus suitable and certified for storing liquid fertilizer (AHL) as well as NOx reduction agent AUS32/AdBlue. Nominal capacity: 100 cbm Quantity: 1 Used, but completely overhauled – cleaned, refurbished, primed, and painted. Paint: RAL color; you can, of course, specify your own color preferences. Material: steel, grade S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and type plate 1 x dipstick 1 x vent nozzle 1 x filling nozzle 3-inch V2A stainless steel (newly installed) 1 x new acoustic leak detector for double-walled design 1 x ladder 1 x suction line 3-inch V2A stainless steel (newly installed) Design: cylindrical horizontal tank with feet/console Tank dimensions: Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 16,500 kg Above-ground storage Top offer: Liquid fertilizer – AHL storage systems from 5,000 to 100,000 liters. Water tanks, fire-fighting water tanks also available. Blodpfx Aec Nk Eveirok You are welcome to participate in the customization of your tank installation! All our systems are thoroughly inspected by selected employees in our company. Affordable delivery available upon request in addition. Inspection of our tanks is possible at any time. Additional above-ground and underground storage tanks of all sizes are available for sale on our premises. Have we been able to convince you with our offer? If you have any questions or requests, just give us a call; one of our experienced staff will be happy to advise you. Price/Shipping The price applies ex location Warstein, loaded free on truck. Delivery can be offered at an additional cost at favorable rates. Delivery time: immediate You will receive an invoice with VAT shown separately. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can provide proper emptying, cleaning, dismantling, and removal. Best regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Byggeår: 1996, Tilstand: brukt, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act (WHG) Dear Sir or Madam, We are offering a 100,000-litre double-walled storage tank for diesel storage, equipped with a new diesel dispensing pump including data capture. Nominal capacity: 100 cbm Quantity: 1 Used but fully refurbished, that means the tank is cleaned, reconditioned, primed, and painted Colour finish: RAL coating; however, you are welcome to specify any custom colour preference. The system is primed and will be painted shortly. Bsdoc Nk A Uspfx Airelk Material: steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate / test certificate according to DIN 6616 D/2 and type plate Includes: - 1 x dipstick - 1 x vent connection - 1 x filling connection - 1 x new overfill prevention device - 1 x new leak detection unit filled with leak detection liquid - 1 x ladder - 1 x suction line Tank shape: cylindrical horizontal tank with feet/consoles Tank dimensions: length approx. 15,750 mm; diameter approx. 2,900 mm Weight: approx. 16,000 kg Above-ground installation Of course, you can also customise your tank system! All our systems are thoroughly inspected and checked by selected members of our company. Affordable delivery can be arranged upon request. Viewing of our equipment is possible at any time. We have further tank units available for both above-ground and underground storage in all sizes, ready for sale at our premises. All our tanks can also be supplied without the diesel pump. Top offer: Liquid fertliser – AHL tanks from 10,000 to 100,000 litres. Water storage and fire-fighting water tanks also available. Price / Shipping The price for the tank system is ex-works Warstein, loaded free onto truck. Delivery can be offered at extra cost at attractive rates. Delivery time: immediately You will receive an invoice including VAT. Additionally, we purchase existing tank systems and, as a WHG-certified company, we can professionally empty, clean, dismantle and transport these systems. Best regards from Warstein, Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Tilstand: god (brukt), 2000 pieces ROLL CAGES AS NEW Total height: 155 cm Item no.: RW-2155N_2000 Please note the minimum purchase quantities / tiered pricing!! This offer is directed exclusively at government agencies, public sector customers, and commercial enterprises! Private enquiries are not accepted. NEW ROLLING BASES in black color and side grids pre-owned Roll containers, roll cages, furniture gliders, food roll containers, rollies, roll containers, roll cages for yellow sacks, firewood trolleys, firewood roll containers, workshop shelves, tire roll racks, rolling racks, suitable for intermediate shelves, suitable for film covers, Roll cages are also perfect as furniture gliders, plant roll containers, technical roll containers, mesh roll containers Standard crates such as baker's boxes, bread baskets fit just as well on this roll cage as butcher's crates, E2 crates DESCRIPTION: - Plastic roll base type 724x815 mm - With 2 reinforcing irons - With wheels, diameter 108 mm, polypropylene - 2 swivel castors - 2 fixed castors Bledsikqy Hepfx Airsk - Steel construction pipe diameter for frames: Ø 22 mm - Load capacity: 500.00 kg Color: - Rolling base black, - Wheels white; - Side grids pre-owned, assorted colors - 2 side grids - Usable height 1350 to 1650 mm Construction: - 4 x vertical flat irons 12 x 3 mm - 2 x horizontal flat irons 12 x 3 mm - 1 x cross pipe Ø 16 mm - Surface finish: gentian blue, similar to RAL 5010, powder-coated Roll base and upper structure also available in: - green RAL 6024 and - red RAL 3000 Price information per unit, net Prices for purchase of 2,000 units: €49 per unit Prices for purchase of 1,000 units: €45 per unit Prices for purchase of 300 units: €54 per unit Prices for purchase of 100 units: €59 per unit If you have further questions, please contact us and provide your phone number. Collection by appointment from warehouse 47441 Moers If you require shipping, please inquire to discuss dismantling and shipping costs We also offer: Intermediate shelves (new or used, good condition) // tension rubber straps (new or used, good condition) // used roll cages in various qualities and dimensions Sample photos

Tilstand: ny, sagbladets diameter: 303 mm, skjærelengde (maks.): 5 300 mm, skjæredybde: 80 mm, uttrekksdyse diameter: 140 mm, Utstyr: doseringsanlegg, Striebig Control18 6224 Cutting area: 6224 L: 5300 x H (vertical): 2240 / H (horizontal): 2100 x D: 80 mm Saw Frame • Machine manufactured with precision components to 1/100 mm accuracy • Solid, self-supporting, fully welded, torsion-resistant saw frame • TRK1 continuous support wall made from birch multiplex with integrated small parts rest • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic middle support detection • Automatic roller locking during cutting process Saw Beam • Robust, durable steel construction • Automatic beam locking with cutting position recognition Saw Unit • Play-free, smooth-running guides • Sturdy mounting of the motor carriage for high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Greater convenience thanks to largely automated operation • Laser-assisted display of horizontal cut • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch to manual operation • SUPERSILENT sound insulation reduces saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12” touchscreen computer with optimized user navigation • Multilingual operator interface • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic sawing process • Stepless feed speed selection 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connectivity • 24VDC UPS for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Measurement Setting • Digital Measurement System DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Bledpeu Nhbyjfx Airok Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winning (including Swiss Design Award) • Functional and operator-friendly ergonomics Installation • Wall-mount or free-standing installation possible - Scoring saw unit VSA (scorer blade infinitely adjustable) - Paper holder - Complete small parts support, aluminium (2 pcs.) - Striebig cutting optimization STRIEBIG ExpertCut CON

Tilstand: klar til bruk (brukt), Byggeår: 2022, En komplett rørfyllings- og pakkelinje for salver er tilgjengelig. 1) Rørtilførselsenhet IWK TZK 200, produksjonsår: 1991. 2) Rørfyllingsmaskin IWK TFS 30, produksjonsår: 1991. 3) Kartonneringsmaskin IWK CPS-R, produksjonsår: 1991. 4) Serialiseringssystem Laetus MV-70-F-130-TL, produksjonsår: 2019. 5) Kontrollvekt Mettler & Toledo C3570, produksjonsår: 2019. 6) Bandlepakkemaskin Kiener ASK 450, produksjonsår: 1993. 7) Kassepakker Skinetta PAL 145, produksjonsår: 1997. 8) Palleteringsmaskin Skinetta PAL 1400, produksjonsår: 1997. 9) Horisontal laminar flow-maskin Marchhart LF-ZP-Horizontal, produksjonsår: 2020. 10) Akkumulasjonsrullebane RBS 140, produksjonsår: 1998. 11) Salvepumpe Netzsch BEF200/NM045BH, produksjonsår: 2022. Dokumentasjon er tilgjengelig. Inspeksjon på stedet er mulig. Blodpfx Aiouf T Nlsrsk

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: BH6721-BH1001, tankkapasitet: 1 000 l, Utstyr: dokumentasjon / manual, BRINOX 1,000 L Pre-fill Tank – 1.4435 – Jacketed – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Pre-fill tank / process vessel Nominal Volume: 1,000 litres Total Volume: 1,400 litres Empty Weight: 762 kg Product-contact Material: 1.4435 (AISI 316L pharmaceutical grade) CE Marking: CE 0036 Permissible Pressure PS: -1 / +3 bar Test Pressure PT: 5.4 bar Permissible Temperature TS: -10°C to +150°C Fluid Group: 1 Design according to AD 2000 guidelines Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent a complete FAT at the factory and was released. Tests carried out included: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per inspection plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 μm) • Calibration test of pressure gauges • Verification of markings • Complete documentation review Full FAT protocols available. EXECUTION • Cylindrical, horizontal vessel Bedpfsykpqrox Airjlk • Double jacket for heating/cooling • Interior electropolished and passivated • High-gloss polished product-contact surface • Pharma-grade weld seams • Manway DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator port (DN 200) • Multiple spare connections • Heavy-duty trunnion/pin mounting • Transport and lifting device DOCUMENTATION – complete and well-structured Comprehensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for filler materials and shielding gases • Company's qualification certificate • Surface roughness report • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates for pressure gauges • Reports and EU conformity of installed components • Assembly with parts list • Detail drawings • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never used in production • Stored as inventory • Interior surface absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking and fully documented FAT. Not a standard tank – project-quality, fully tested with comprehensive GMP-compliant documentation. Immediately available.

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: BH6723-BH1001, tankkapasitet: 1 000 l, Utstyr: dokumentasjon / manual, BRINOX 1,000 L pre-filling tank – 1.4435 – double jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As new Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of manufacture: 2020 CE marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: approx. 610–762 kg Product-contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – single inspection Notified body: TÜV SÜD ID number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate No.: Z-EU-SI-LJU-20-05-2702107-19125214 Test report No.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection according to PED Annex I No. 3.2 performed Pressure test according to Annex I No. 3.2.2 performed Acceptance without deviations Permissible number of load cycles: 10,000 cycles (1.3 bar) Acceptance date: 20/05/2020 FAT – Factory Acceptance Test Complete in-factory FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional check • Surface roughness measurement (≤ 0.8 µm) • Calibration inspection • Documentation verification FAT fully documented. DESIGN DETAILS • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internal surfaces electropolished Bodpfxoykqmzj Airolk • Pharmaceutical-grade welding • Manway DN 500 • CIP connection • Safety valve • Manometer • Multiple process and instrumentation nozzles • Suitable for pressure and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G accepted • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design review • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Surface roughness certificates • Internal pressure test • Dimensional inspection reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical applications • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-quality BRINOX pharma specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – verified project quality. Immediately available.

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, tankkapasitet: 30 000 l, Utstyr: dokumentasjon / manual, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – complete GMP documentation – incl. saddle support – 2020 – As new Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 litres Total volume: 33,213 litres Product-contacting material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated, and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: - PED 2014/68/EU compliant - CE marking available - GMP-compliant pharmaceutical design Pressure Data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test carried out. FAT – Factory Acceptance Test Fully documented FAT performed including: - Dimensional, visual, and identification check - Weld seam inspection and NDT Bledpfsykngfsx Airsk - Pressure testing according to PED - Verification of all connections - Documentation and quality inspection FAT fully passed. FAT report available. DESIGN / CONSTRUCTION - Horizontal pharmaceutical process vessel - Stainless steel 316L, pharmaceutical grade - Internal surface pickled and passivated - Hygienic, GMP-compliant construction Connections include: - Manhole DN500 - Inlet DN100 - Outlet DN50 - Measurement, safety, and process connections Mechanical Design: - Original BRINOX stainless steel saddle support included - Heavy-duty design - Lifting points for crane handling present CONDITION - Absolutely as new - Never installed or used in production - Never filled with product - No corrosion or signs of use - Original industrial packaging available - Immediately available Saddle support also in as-new condition and included in the scope of supply. DOCUMENTATION – fully available (GMP compliant) Comprehensive manufacturer and project documentation including: - EU Declaration of Conformity and CE documents - PED documentation - Material certificates EN 10204 – 3.1 - Welding documentation (WPS / WPQR, welder lists) - NDT inspection reports - FAT and pressure test protocol - Surface roughness and finish protocols - Calibration certificates - Part drawings and bills of materials - Operating and maintenance manuals Documentation is fully available in digital format. TRANSPORT AND PACKAGING - Professional export packaging available - Original industrial packaging - Crane handling easily possible - Worldwide shipping possible SUITABLE FOR - Pharmaceutical industry - Biotechnology - WWAS, WFI, and PW systems - Sterile process solutions - GMP-compliant manufacturing plants SPECIAL FEATURE Surplus from an international pharmaceutical newbuild project with complete FAT, PED compliance, and GMP documentation. Large-volume BRINOX 30,000 L pharmaceutical process vessel in as-new plant quality, including saddle support – immediately available.

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, tankkapasitet: 1 000 l, Utstyr: dokumentasjon / manual, BRINOX 1,000 L Pre-Filling Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag-No.: BH6725-BH1001 Serial Number: 1003455 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling / Process tank Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product-contact material: 1.4435 Design pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 FAT – Factory Acceptance Test Complete in-house FAT performed and documented. Tests incl. pressure test, NDT, dimensional check, roughness test, and release of documentation. CONFIGURATION • Cylindrical horizontal pressure vessel • Double jacket for heating / cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manway DN500 • Multiple process and instrumentation nozzles • Safety valve • CIP connections • For operation under pressure and vacuum CONDITION • Never used in production • Accepted by TÜV Module G • Industrial as-new condition • Immediately available DOCUMENTATION – fully available Complete structured documentation incl.: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design assessment • FAT documentation • Material certificates • Welder lists and WPS/WPQR • NDT reports • Roughness protocol • Surface treatment report • Internal pressure test • Dimensional protocol • Manometer calibration certificate • Component drawings • Assembly overview with parts list • Operating and maintenance manuals (equipment & components) • Qualification certificates • Analysis certificates for welding consumables and shielding gas Full digital documentation folder available. Bsdpfx Aijykt T Rjrslk SUITABLE FOR • Pharmaceutical • WFI / PW • GMP systems • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical-grade execution with PED Cat. IV Module G individual TÜV SÜD inspection, complete FAT, and comprehensive technical documentation. Immediately available.

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, tankkapasitet: 3 500 l, Utstyr: dokumentasjon / manual, BRINOX 3,500 L batch tank – 1.4435 – double jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like new Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag no.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: Like new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product-contacting material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible pressure vessel PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category III Module G – Single inspection Notified body: TÜV SÜD Industrie Service GmbH (identification no. 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully FAT-tested and released at the factory. Tests performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT according to test plan) • Dimensional and as-built drawing check • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Verification of marking • Complete documentation check FAT protocols are fully available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe coil system • Internally electropolished and passivated • High-gloss polished product surface • Pharmaceutical-grade weld seams • Manway DN 500 • Powder / product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion mounting • Lifting lugs DOCUMENTATION – fully and systematically available Comprehensive, project-specific quality and manufacturing documentation, including: • EU declaration of conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and shielding gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Complete parts list • Partial drawings • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never in productive operation • Stored as inventory • Interior surface absolutely as new Bjdpfjylng Uox Airelk • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with full PED Module G single inspection by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank, but inspected project quality with comprehensive GMP-compliant documentation.

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, tankkapasitet: 3 500 l, Utstyr: dokumentasjon / manual, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o., Slovenia Type: SVBBH-3500 Tag No.: Serial No.: 1003461 Year of Manufacture: 2020 Condition: Like new / unused BH6771-BH1001 Package 29 TECHNICAL DATA Product Type: Storage Tank / Process Tank Nominal Volume: 3,500 litres Total Volume: approx. 4,082 litres Empty Weight: approx. 1,750 kg Product Contact Material: 1.4404 (AISI 316L) Internal Surface: Electropolished Surface Roughness: Inspected according to roughness protocol (Ra ≤ 0.8 µm) Permissible Pressure PS Vessel: -1 / +3 bar Test Pressure PT Vessel: 5.6 bar Permissible Pressure PS Jacket: -1 / +6 bar Test Pressure PT Jacket: 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection CE marking FAT – Factory Acceptance Test Full FAT acceptance performed on 26.08.2020. Documentation review: complete and approved Welding documentation inspected and compliant Delta ferrite test carried out, no deviations Surface roughness inspected and passed All tests rated as "OK." DESIGN FEATURES • Horizontal cylindrical pressure vessel • Dished (Klöpper) ends • Multiple CIP connections at end face • CIP spray ball system • Manway with round pressure closure • Pressure and temperature connections • Bottom drain • Stainless steel support legs • Pharmaceutical-grade weld seams DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificate • Module G Individual Inspection • FAT protocols • Welding documentation • WPQR / WPS • Material certificates 3.1 • Non-destructive inspection reports • Delta ferrite test report • Roughness protocol • Dimensional accuracy inspection • Calibration certificates • Technical drawings • Parts list • Operating and maintenance manual Bljdsylnppspfx Airsk Complete digital documentation folder available. CONDITION • Never used in production • Warehouse item • Internal surface absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES Project-specific BRINOX pharma vessel with complete FAT acceptance, certified welding documentation, delta ferrite proof, documented surface roughness and comprehensive PED Module G individual inspection. Not a standard tank – but pharma-grade, fully validatable quality with comprehensive technical documentation.

Tilstand: ny, Byggeår: 2020, Funksjonalitet: fullt funksjonell, tankkapasitet: 3 500 l, Utstyr: dokumentasjon / manual, BRINOX 3,500 L Horizontal Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Horizontal Storage Tank / Process Vessel Nominal volume: 3,500 litres Total volume: 4,082 litres Jacket volume: 226 litres Empty weight: approx. 1,760 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE marking: CE 0036 Design pressure PS vessel: -1 / +3 bar Design pressure PS jacket: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design to AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully tested and released by the manufacturer. Tests carried out include: • Pressure test according to PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing verification (as-built) • Verification of material certificates • Calibration of pressure gauges • Verification of marking • Complete documentation check as per inspection list Full FAT and TÜV protocols available. EXECUTION • Cylindrical, horizontal storage vessel • Double jacket for heating/cooling • High-grade pharmaceutical design • Manhole with round pressure closure • CIP pipe system • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting saddles / trunnion design • Lifting lugs • Nameplate with complete PED marking Bedpfxeylnwyo Airjlk DOCUMENTATION – complete and structured • EU Declaration of Conformity • TÜV certificate with acceptance report (Module G) • TÜV design inspection and certification • Material certificates 3.1 • Welders’ lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Calibration certificates for pressure gauges • Surface and manufacturing reports • Parts list • Detailed drawings (body, cover, CIP, J-pipe, etc.) • Operating and maintenance documents A complete digital documentation file is available. CONDITION • Never used in production • Stored as stock • Internal surfaces as new • No corrosion • No signs of use • Industrial factory condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production plants • Process and waste systems SPECIAL FEATURES High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – but project-quality, certified equipment with comprehensive GMP-compliant documentation.

Tilstand: ny, Fastech horizontal dobbel gjæringsbåndsag, halvautomatisk – BMSY 440 DGH Rundt sageområde: mm 440 Flatt sageområde: mm 610 x 440 Firkantet sageområde: mm 440 +30° rundt sageområde: mm 400 +30° flatt sageområde: mm 500 x 440 +30° firkantet sageområde: mm 440 +45° rundt sageområde: mm 440 +45° flatt sageområde: mm 410 x 440 Bedehpil Espfx Airslk +45° firkantet sageområde: mm 410 +60° rundt sageområde: mm 320 +60° flatt sageområde: mm 250 x 440 +60° firkantet sageområde: mm 250 -30° rundt sageområde: mm 440 -30° flatt sageområde: mm 500 x 440 -30° firkantet sageområde: mm 410 -45° rundt sageområde: mm 410 -45° flatt sageområde: mm 410 x 440 -45° firkantet sageområde: mm 410 -60° rundt sageområde: mm 320 -60° flatt sageområde: mm 285 x 440 -60° firkantet sageområde: mm 285 Hovedmotoreffekt: kW 3 Hydraulikkpumpeeffekt: kW 0,55 Kjølepumpeejekt: kW 0,12 Trinnløs båndhastighet: m/min 20 – 100 Bånddimensjoner: mm 5200 x 34 x 1,1 Arbeidsbordhøyde: mm 860 Vekt: kg 1 540 Lengde / dybde / høyde: mm 2 800 / 1 210 / 1 870 Dobbel gjæringssag Trinnløst regulerbar båndhastighet Hydraulisk skrustikke med sensitiv snitttrykksregulering Høytytende girkasse Hydromekanisk båndspenning Båndbørste Digital visning av gjæringsvinkel

Byggeår: 2021, Tilstand: ny, Fastech Horizontal Bandsaw Fully Automatic BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45° Round cutting range mm: 320 +45° Flat cutting range mm: 290 x 300 +45° Square cutting range mm: 290 x 290 Main drive motor output kW: 2.2 Hydraulic pump output kW: 0.37 Coolant pump output kW: 0.12 Infinitely variable band speed mm: 20-100 Saw blade dimensions mm: 4160x34x1.1 Working table height mm: 760 Weight kg: 1050 Length mm: 2450 Depth mm: 920 Height mm: 2020 Roller conveyor 1200mm Variable band speed Hydraulic vise High-performance gearbox Blodpfsg Ekt Nox Airsk Hydromechanical blade tensioning Saw blade brush Control unit

Tilstand: god (brukt), Byggeår: 1996, Reckermann Kombi 1050 Console Milling Machine – Reckermann Kombi 1050 with Heidenhain TNC 124 Control, Year of Manufacture 1996, in Good Condition The machine comes from the training department of a renowned German machine builder and was decommissioned because it was too large for their typical applications. Technical Specifications: Console Milling Machine RECKERMANN Model: Kombi 1000 Year: 1996 Control: TNC 124 Heidenhain Travel (X-axis): 1,000 mm Travel (Y-axis): 350 mm Bedex N Euxopfx Airolk Travel (Z-axis): 450 mm Distance spindle center to column: 50 – 500 mm Distance spindle center to table: 0 – 450 mm Table height above floor: 850 – 1,300 mm Clamping surface: 1,570 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 70 mm Max. workpiece weight: 500 kg Spindle taper: SK 40 Spindle speed range – milling: 48 – 2,100 rpm Spindle motor power: 6.1 / 7.4 kW Gear steps: 16 Rapid traverse X-axis: 5 m/min Rapid traverse Y-axis: 5 m/min Rapid traverse Z-axis: 2 m/min Feed rate: 10 – 1,000 mm/min Feed force: 22 Nm Total connected load: 400 V Machine weight: approx. 4.0 t Space requirement: approx. 3.3 x 2.2 x 2.2 m Equipment and Accessories: - Heidenhain TNC 124 control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Technical documentation, spare parts lists, control manual, and programming examples - Handwheels, coolant system, spindle brake About the Machine: Offered here is a console milling machine Reckermann Kombi 1050 with Heidenhain TNC 124 control, year of manufacture 1996. This universal milling machine is in very good original condition. It comes from an operation where it was only occasionally used for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is straightforward due to the swivel action of the vertical head. The guides are regularly lubricated via the central lubrication system. Both mechanically and electrically, the Reckermann has been checked by us. You are invited to inspect and test the Reckermann under power at our facility. You can find further milling machines from renowned manufacturers on our website.

Tilstand: god (brukt), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with transmission). The machine was used exclusively for copper and graphite machining, so it was not subjected to heavy loads. The machine is immediately ready for operation and fully functional. Retrofitting with a digital readout is available at extra cost. The machine can also be sold without the milling head. Dividing attachment NOT included. Accessories available at extra cost. Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Blsdslz R Iwspfx Airjk Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machinery purchase / sale BUYING & SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Tilstand: svært god (brukt), Byggeår: 2013, Funksjonalitet: fullt funksjonell, vandring X-akse: 4 000 mm, vandring Y-aksen: 2 200 mm, bevegelsesavstand Z-akse: 1 100 mm, mating X-akse: 50 m/min, matingshastighet Y-akse: 50 m/min, mating Z-akse: 50 m/min, bordlengde: 4 000 mm, bordbredde: 2 000 mm, spindelhastighet (maks.): 22 000 o/min, dreiemoment: 128 Nm, spindelnese: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA X-axis travel (longitudinal): 4,000 mm Y-axis travel (transversal): 2,200 mm Z-axis travel (vertical): 1,100 mm Maximum speed with interpolated axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot orientation parallel to the X-axis movement. AXIS FEATURES: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING THROUGHPUT Bjdozb Evlopfx Airjlk Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD FOR SPINDLE HOLDER Automatic universal head indexed at 360,000 positions (every 0.001°). Rotation is controlled by direct drive motors and managed by the CNC as a positioning axis. Automatic tool clamping. Allows undercutting up to 10°. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK – A63 DIN 69893 The head comes complete with a cradle for handling and storage. Using the cradle occurs outside the effective working area and therefore does not reduce the machine’s actual capacity. 30-STATION CHAIN TOOL MAGAZINE HSK: Automatic 30-position chain tool changer, located at the rear of the work area, completely protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent pockets occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic unit with control module for scale pressurization. SPRAY-MIST COOLANT FOR TOOLS: Mist lubrication cooling system. The mist is achieved by mixing air and oil. Controlled via M function. Using spray-mist improves cutting quality, prevents built-up edge, keeps cutting area clean, and acts as a coolant. Extremely useful for improving surface finish quality. EXTERNAL TOOL COOLING: Coolant distribution system controlled by CNC with nozzles mounted around the spindle flange, complete with 1200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A Machine complete with: • Remote Heidenhain HR550 electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser tool presetting • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioning • Cooling system for all axes and spindle motor • No. 2 chip conveyors on both sides of the worktable • User and maintenance manual and CE conformity declaration

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Slicer-linje CFS type UniSlicer med MC-styring, komplett i rustfritt stål, inkludert: - CFS Check DC 2000 MK3 (vekt) - CFS Horizontal Distributor (fordeler) - CFS avtransportbånd ATB 3100 mm - Tilbehør og dokumentasjon - Flere reservedeler. Maskinen er fullstendig i rustfritt stål. Blodpfjyk D Hbjx Airsk

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Utstyr: dokumentasjon / manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (newly planed) >> Spindle speed: 40 – 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle mount Bledpsu T D Nrsfx Airjk >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1992, in very good condition. The machine has very little backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this newer FP1 model, feed is steplessly adjustable in all three axes and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions that the machine will approach automatically. The FP1 was located in a training workshop and was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Tilstand: svært god (brukt), Byggeår: 1983, Funksjonalitet: fullt funksjonell, Universal milling machine Deckel FP1 with 3-axis K&C digital readout (new) and stepless feed on all 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table Blodpfx Aijtwlwzerok >> Spindle speed: 40 - 2000 rpm >> Stepless feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis K+C digital readout, newly installed with manufacturer's warranty and instruction manual. Display features: Set reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circular functions, bolt hole patterns, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Universal Milling Machine Deckel FP1, year 1983, in superb condition. The machine has minimal backlash on the handwheels and all spindles can be moved smoothly. Even at maximum speeds, the milling machine runs very quietly. For this later FP1 model, the feed is stepless and adjustable on all three axes; the machine also features rapid traverse on all axes. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The new K&C digital readout makes working much easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Utstyr: dokumentasjon / manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006, fully overhauled, excellent condition Technical Data: >> Machine No.: 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system Bedpovb Ud Uefx Airelk >> Machine leveling feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash in the handwheels, and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has been used very little since then. The RSF digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.