Slipemaskin for koniske tannhjulGLEASON
PHOENIX 200 HG
Slipemaskin for koniske tannhjul
GLEASON
PHOENIX 200 HG
Produksjonsår
1997
Tilstand
Brukt
Plassering
Metzingen 

Grunnleggende data
- Maskinbetegnelse:
- Slipemaskin for koniske tannhjul
- Produsent:
- GLEASON
- Modell:
- PHOENIX 200 HG
- Produksjonsår:
- 1997
- Tilstand:
- brukt
Pris og beliggenhet
- Plassering:
- Metzingen

Ring
Detaljer om tilbudet
- Annonse-ID:
- A16566886
- Referansenummer:
- 1049-328540
- Oppdatering:
- sist oppdatert 17.07.2024
Beskrivelse
Wheel diameter – max. 215 mm
Wheel width – 40.65 mm
Module – max.
Total power requirement: 20 kW
Machine weight approx. 10 t
GLEASON (USA)
CNC Grinding Machine for Spiral and Hypoid Bevel Gears
Model: PHOENIX HG 200
Year of manufacture: 1997
Max. outer diameter of workpiece: 215 mm
Tooth profile size (height x width): 16 mm x 40.65 mm
Tooth count range: 5 – 200
Maximum gear ratio: 1 : 10
Grinding wheel diameter: 51 – 190 mm
Grinding wheel speed: 1,000 – 6,000 rpm
X-axis (horizontal): 152 mm
Y-axis (vertical): 178 mm
Z-axis (slide base): 304 mm
Distance from machine center to workpiece spindle face: 115 mm
Axis speed: 125 mm/sec
Workpiece spindle speeds: 0 – 30 rpm
Workpiece spindle bore (tapered): 3 29/32 inch
Total drive power approx.: 20 kW – 380 V – 50 Hz
Weight approx.: 10,000 kg
Accessories / Special Features:
• FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters
• Large, sophisticated cooling system with filter unit, belt filter, etc.
• Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle
• Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel offers advantages in terms of heat generation and contact pattern quality.
Therefore, these bevel gear sets (automotive industry) can be produced in high quality, consistent accuracy, at low cost and with short setup times. For further details refer to the brochure copy on our website.
Hnedst Hwxhopfx Andsw
Condition: Very good – available for demonstration under power
Delivery: Ex stock – as inspected
Payment: Net, payable on receipt of invoice
We look forward to your order. Other gear cutting machines in stock at all times.
X-axis (horizontal): 152 mm
Y-axis (vertical): 178 mm
Z-axis (slide base): 304 mm
Distance from machine center to workpiece spindle face: 115 mm
Axis speed: 125 mm/sec
Workpiece spindle speeds: 0 – 30 rpm
Workpiece spindle bore (tapered): 3 29/32 inch
Total drive power approx.: 20 kW – 380 V – 50 Hz
Weight approx.: 10,000 kg
Accessories / Special Features:
• FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters
• Large, sophisticated cooling system with filter unit, belt filter, etc.
• Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle
• Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel...
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Wheel width – 40.65 mm
Module – max.
Total power requirement: 20 kW
Machine weight approx. 10 t
GLEASON (USA)
CNC Grinding Machine for Spiral and Hypoid Bevel Gears
Model: PHOENIX HG 200
Year of manufacture: 1997
Max. outer diameter of workpiece: 215 mm
Tooth profile size (height x width): 16 mm x 40.65 mm
Tooth count range: 5 – 200
Maximum gear ratio: 1 : 10
Grinding wheel diameter: 51 – 190 mm
Grinding wheel speed: 1,000 – 6,000 rpm
X-axis (horizontal): 152 mm
Y-axis (vertical): 178 mm
Z-axis (slide base): 304 mm
Distance from machine center to workpiece spindle face: 115 mm
Axis speed: 125 mm/sec
Workpiece spindle speeds: 0 – 30 rpm
Workpiece spindle bore (tapered): 3 29/32 inch
Total drive power approx.: 20 kW – 380 V – 50 Hz
Weight approx.: 10,000 kg
Accessories / Special Features:
• FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters
• Large, sophisticated cooling system with filter unit, belt filter, etc.
• Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle
• Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel offers advantages in terms of heat generation and contact pattern quality.
Therefore, these bevel gear sets (automotive industry) can be produced in high quality, consistent accuracy, at low cost and with short setup times. For further details refer to the brochure copy on our website.
Hnedst Hwxhopfx Andsw
Condition: Very good – available for demonstration under power
Delivery: Ex stock – as inspected
Payment: Net, payable on receipt of invoice
We look forward to your order. Other gear cutting machines in stock at all times.
X-axis (horizontal): 152 mm
Y-axis (vertical): 178 mm
Z-axis (slide base): 304 mm
Distance from machine center to workpiece spindle face: 115 mm
Axis speed: 125 mm/sec
Workpiece spindle speeds: 0 – 30 rpm
Workpiece spindle bore (tapered): 3 29/32 inch
Total drive power approx.: 20 kW – 380 V – 50 Hz
Weight approx.: 10,000 kg
Accessories / Special Features:
• FANUC – 7-axis CNC control, Model 150 MB with screen and direct input; automatic calculation of all workpiece and grinding parameters
• Large, sophisticated cooling system with filter unit, belt filter, etc.
• Driven CNC dressing unit for the grinding wheel with automatic form and diameter compensation after each dressing cycle
• Gear grinding can be performed either as single-piece operation with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made from CBN or conventional, dressable aluminum oxide wheels (cost-dependent). Grinding with a conical wheel...
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Send forespørsel
Telefon & Faks
+49 7123 ... annonser
Disse annonsene kan også være av interesse for deg.
Vellykket
Meldingen din er sendt.
Annonse
Tychy
1 331 km
Balanser
SCHENCKTBcomfort
SCHENCKTBcomfort
Vellykket
Meldingen din er sendt.
Annonse
Tyskland
1 025 km
Bearbeidingssenter - horisontalt
WMW HECKERTCWK 500D
WMW HECKERTCWK 500D
Vellykket
Meldingen din er sendt.
Annonse
Warren
6 088 km
Maskin for forming av tannhjul
Gleason100S
Gleason100S
Vellykket
Meldingen din er sendt.
Annonse
Emmelshausen
1 150 km
Fresemaskiner
DMG MoriSeiki Milltap 700
DMG MoriSeiki Milltap 700
Vellykket
Meldingen din er sendt.
Annonse
Paitone
1 665 km
CNC dreiebenk
DAEWOOPUMA 300 LM
DAEWOOPUMA 300 LM
Vellykket
Meldingen din er sendt.
Annonse
Dorsten
986 km
Vertikal tårn dreiebenk - enkelt kolonne
SCHIESS-FRORIEP32 DE 250
SCHIESS-FRORIEP32 DE 250
Vellykket
Meldingen din er sendt.
Annonse
Storbritannia
986 km
Dyphullsboremaskin
RyazanRyazan Model PT295106 Deep Hole Borer x
RyazanRyazan Model PT295106 Deep Hole Borer x
Vellykket
Meldingen din er sendt.
Annonse
Tyskland
1 093 km
Maskin for sliping av tannflanker
LIEBHERRLCS282
LIEBHERRLCS282
Vellykket
Meldingen din er sendt.
Annonse
Iserlohn
1 016 km
CNC universalfresemaskin
DMG MORIMH 600 C
DMG MORIMH 600 C
Vellykket
Meldingen din er sendt.
Annonse
Unterschleißheim
1 371 km
Slipemaskin for koniske tannhjul
GLEASONPhoenix 275 G
GLEASONPhoenix 275 G
Annonsen din har blitt slettet
Det har oppstått en feil













































































































