Kjøp brukt Pneumatica Cavazzuti 80X260 (206)

Tilstand: svært god (brukt), Byggeår: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping Unit: Clamping force [kN]: 13,000 Platen size (HxV) [mm]: 2210 x 1910 Tie bar clearance (HxV) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700-1400 Max. opening stroke [mm]: 3050 Max. ejector stroke [mm]: 350 Injection Unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight (PS) [g]: 4728 Injection pressure [bar]: 2296 Max. injection speed [g/s PS]: 186 Electrical-Hydraulic Equipment: Pump motor rated power [kW]: 132 Screw drive motor rated power [kW]: 145 Heater power [kW]: 71 Dimensions and Weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runner: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner needle control Hydraulic accumulator Itedpfoy Hqwyex Aqvjk Cooling: System with 20 rotameters (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Tilstand: nesten som ny (brukt), Byggeår: 2023, driftstimer: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge air and water cooler Electronic direct injection / common rail Extended idle control with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals upper carriage Maintenance flaps, gas-spring operated with closing assist Automatic central lubrication system, grease reservoir refillable from ground level Rearview camera Side camera LED lighting package equipment LED lighting package for cab Dozer blade on oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit braking system Powershift transmission Twin pneumatic tyres, without spacer rings 10.00-20 16PR (Trelleborg T900) Wireless tyre pressure monitoring Automatic oscillating axle lock Front and roof guard for timber handling machines Rigid cab system (viewing height 4.00m) Cab privacy glazing (side, rear window) Single-pane safety glass Sliding window in cab door Clear glass roof window Windscreen washer system (front window) Low-frequency suspended comfort driver’s seat including seat heating and seat ventilation with synchronised armrests / joysticks Joystick steering Iedpjyh A Iisfx Aqvjtk Automatic climate control Multifunction display Document holder Reach at stick pin 13m at grab tip 10.7m Close-range extension for loading stick Level monitoring for coolant and hydraulic oil Filter system for attachments Load holding valves boom cylinder Load holding valves stick cylinder Basic overload warning device Quick release coupling on loading stick Timber grab on request 1 or 1.25 m³

Tilstand: svært god (brukt), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is designed to test the ingress of water into enclosures. With the addition of a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel-mounted and replaceable nozzle holders - Adjustable water flow rate with measurement - Programmable test duration control Mechanical load data: Max. load for test specimen (evenly distributed): Permissible specimen weight for test holder (total): 25 kg Spray radius: 200 mm / 400 mm Ijdezil T Ejpfx Aqvstk Data for IP protection class testing: Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photos) (Specifications are subject to change and errors reserved!) For further questions, we would be pleased to assist you by phone.

Tilstand: svært god (brukt), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used to test for the ingress of water into enclosures. When used in conjunction with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swiveling and replaceable nozzle holders - Adjustable and monitored water flow rate - Programmable test duration Mechanical load data: - Maximum test load (evenly distributed): - Permissible specimen weight for test carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) Itjdpfx Aqezii Akovek (Subject to changes and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Tilstand: brukt, Byggeår: 2019, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: ITJ291580, effekt: 15 kW (20,39 hk), Utstyr: Typeplate tilgjengelig, kompressor, trykkluftsystem, Chicago Pneumatic CPVSD20 UL-kompressoren er et industrielt, oljesmurt utstyr på 15 kW, ideell for ulike bruksområder hvor det kreves arbeidstrykk på opptil 10 bar. Selv om den er brukt, er denne maskinen konstruert for å levere pålitelig og langvarig ytelse i krevende industrimiljøer. Kompressorene fra Chicago Pneumatic-serien er kjent for sin energieffektivitet og evne til å tilpasse seg varierende behov for trykkluft, takket være det avanserte styringssystemet. Modellen CPVSD20 UL tilbyr spesielt en utmerket balanse mellom kraft og økonomi, noe som gjør dette til et fornuftig valg for brukere som ønsker å kombinere ytelse med lave driftskostnader. Ved å velge denne kompressoren får du en robust og velprøvd maskin, klar for integrering i din produksjonslinje, eller til bruk i spesifikke applikasjoner som krever konstant trykk. Dette er en investering som gir deg både driftssikkerhet og kvalitet, og sikrer sømløs kontinuitet i dine industrielle operasjoner. Itjdpfezfzagox Aqvsk

Tilstand: brukt, Dematic Conveyor System Accumulation Roller Conveyors Accumulation Roller Conveyor 15000-750-690 RA2458 The roller conveyor shown does not exactly match the depiction in the listing, but it is the same model and in the same condition. Only the dimensions differ. Additional information: Manufacturer: Dematic Type: accumulation roller conveyor Year of construction: unknown Conveyor length (FL): 15,000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation bay size: 750 mm Accumulation bay control: plug and play, electro-pneumatic Iodpfoyb Upzex Aqvstk Roller pitch: 125 mm Drive type: head drive SEW Eurodrive Conveying speed: approx. 0.35 m/s Optional accessories available, e.g.: Frequency converter for stepless speed regulation Supports Side guides Price: Net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply contact us. Please feel free to get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Tilstand: svært god (brukt), Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The unit is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for testing according to protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe Itjdpfx Ajzh D Rmjqvek - Adjustable oscillation angle - Exchangeable oscillating pipes - Swivel-mounted and replaceable nozzle holders - Adjustable and monitored water flow rate - Control of test duration Mechanical Load Data: - Maximum test specimen load (evenly distributed): - Permissible test specimen weight for carrier (total): 25 kg - Spray radius: 200 mm / 400 mm IP Protection Class Test Data: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) For further questions, we are happy to assist you by phone.

Tilstand: som ny (utstillingsmaskin), Byggeår: 2019, Funksjonalitet: fullt funksjonell, Pester Pewo pack 250 compact Trade Fair Demonstration Machine (no production hours) New build 2025 The PEWO-pack 250 compact includes the following assemblies (standard equipment): Vertical Infeed Transfer Conveyor Ijdeym N Icopfx Aqvjtk - Protection class: IP54 (standard) - Control cabinet: swivel-mounted - Proximity switch: Wenglor (standard) - Pneumatic version: Pneumatics (standard) - Signal tower: three-color (standard) - Electrical configuration: Electrical standard S rev 15 - Frequency converter: Lenze (standard) - Product infeed: linear, center Technical Data: - New HMI operating panel – type: HMI 15" Pester Tangius (standard) - New control system: Schneider electronics - Voltage: 3x400V+N+PE, 50 Hz/60 Hz - Operating side: right - Safety guard: acrylic glass (standard) - Paint finish: VA design (standard) - Packaging material – film: PE flat film - Documentation – language: 2x German + 1x CD - Documentation – version: Standard - Documentation – supplier: 1x - Discharge height proposed machine: not yet known - Infeed height Pester machine: 900 - 950 mm - Discharge height Pester machine: 980 - 1030 mm - K-Pallet 400x180x250 mm for Pack compact Powered by Knoll VpA

Tilstand: brukt, Byggeår: 2022, Plate width: 3100 mm Plate thickness: 10.0 mm Plate thickness (stainless steel): 6.0 mm Hold-down clamps: 14 pcs Strokes: 13 strokes/min Cutting angle: 2.0° Throat depth: 350 mm Backgauge (adjustable): 1000 (+) mm Oil capacity: 260 ltr. Motor power: 22.0 kW Weight: 10,575 kg Dimensions (LxWxH): 4100 x 2400 x 2170 mm Demonstration / display machine (!!) From our showroom (like NEW) With very low operating hours The manufacturer ERMAK offers you, with the HGD series hydraulic swing beam shear, a robust and durable machine for the efficient processing of sheet metal. This compact all-round machine allows you to increase your productivity. The HGD model hydraulic swing beam shear supports you in precise, fast, and cost-effective cutting in your daily workflow. Hydraulic hold-downs secure the sheet, and the support table with built-in ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control enables you to work with different types of sheet metal, all stored in the materials library. After selecting the maximum thickness, the optimal cutting gap is automatically adjusted by the CNC electro-hydraulically, but can also be set manually. The position and retract function of the motor-driven backgauge can easily be controlled via touchscreen. Furthermore, the control system offers memory for cutting programs with sequence storage. ----- Robust electro-hydraulic CNC swing beam shear * Includes CYBELEC CNC touch screen controller * Includes CNC electro-hydraulic cutting gap adjustment ----- Equipment features: - CNC electro-hydraulic swing beam shear - Incl. CYBELEC CNC touch screen controller, model 'CybTouch 8' - Selected CNC controller functions: * Backgauge pre-selection - X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material pre-selection, incl. sheet thickness Itodexab I Hjpfx Aqvjk * Cutting line illumination (cutting to mark) ... and many more - Motorized backgauge, travel range = 5.0-1,000 mm (X axis) * On ball screw spindles * Automatically retracts at max. travel for longer cuts * Includes selectable retract function ('Swing-Away Function') * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Flip-up finger guard with safety switch * Finger guard with viewing windows for cutting to mark - Cutting line illumination with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Freely movable foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Tilstand: brukt, Byggeår: 2011, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 106546-11, total høyde: 3 550 mm, total lengde: 7 185 mm, total bredde: 4 720 mm, totalvekt: 8 000 kg, Bore method of the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, without retracting) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: up to 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Axis Travels: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Movement Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x scraper belt chip conveyor - 1x screw conveyor system - 1x hydraulic power unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact band filter: Filtration rate: 175 l/min For machining: steel/non-ferrous - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extractor, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine: Consists of: - Tool changer magazine with intermediate gripper - Tool holder SK 40 - Max. allowable tool Ø: 80 mm - Max. allowable tool length: 250 mm - Tool storage capacity: 80 - 2x pivoting tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length/width: 800x600 mm - B-axis: 360° - Positioning accuracy: B-axis +/- 30" Itedjxdm Awjpfx Aqvsk - Table travel: 800 mm - Payload (centrically): 1,500 daN Electrical Equipment Information: - 1x CNC control Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Byggeår: 2002, Tilstand: god (brukt), maskin-/kjøretøynummer: HHNRW, Demag / CTI monorail system with 7 Demag DH hoists (Pot transport system from an aluminium foundry) Itedpfsh Ad Saox Aqvok Payload / lifting capacity: 6,300–7,000 kg / 6.3 + 7 t Approx. 100 m track carriers (CTI profile – modular system) without hall constructions, etc. 9 pneumatic switches, curved sections, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and inspection books is available. Hoists can be moved individually along the rail system, each hoist has its own control system, including conductor rail system for supply of the hoists Fully two-stage travel – fine lift! Used condition – system was serviced/overhauled in 2018 for €155,000 (travel rails / hoists) System is dismantled and immediately available (delivery volume approx. 20–25 t, about 2 lorry loads) More pictures available on request – please inquire Shipping by freight forwarding possible, collection preferred Freight costs within 500 km €1,400. For precise costs, please ask with postcode!

Tilstand: nesten som ny (brukt), Byggeår: 2023, Dornbiegemaschine S4501 ----- For manufacturing tube geometries with bending radii from 1.5xD → Maximum bending capacity for tube: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for tube: 30 x 30 x 3 mm → Maximum bending capacity for tube: 42.4 x 2 mm (stainless steel, 0.2 260 N/mm²) → Total connected load: 3 kW → Tube feed length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system’s touch display ensures simple and intuitive programming and operation of the machine. After the tube is pushed in, it is clamped by the chuck in the carriage, enabling precise tube positioning and the creation of dimensionally accurate geometries. A standard feature also includes tube geometry verification before the bending process: if the bending process is started in the wrong position, the machine will not release it. Thus, operating errors are prevented. Optional additional features provide greater convenience and increase throughput, improving the system’s overall efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is possible via USB stick or network connection. Existing tube geometries can be imported using the software. Standard equipment: → Servo drive for bending axis: 1.5 kW → Adjustable speed → Bending direction: left → Bending angle resolution: 0.1° → Maximum bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo drive for feed Itedpfx Ajtr U Hljqvok → Servo drive for rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via network (LAN) or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After length and angle input, the control calculates the feed values and bending angles directly. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1,200 kg

Tilstand: som ny (utstillingsmaskin), Byggeår: 2015, Knapp Roller Conveyor Diverter Pusher Transfer Timing Belt Shifter 90° 2900/2270-710-650 RA2415 Manufacturer: Knapp Direction of travel: bidirectional Roller width (RW): 650 mm Nominal/outside width (NW): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller pitch: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of buffer positions: 5 Buffer position size: 700 mm Transfer belt pusher motor: SEW motor 3x 300-500V Roller conveyor motor: Interroll EC300 Conveying speed: infinitely adjustable with Interroll EC 300 up to 1.25 m/s Scope of delivery: including supports, pneumatic pusher lift, and end stop Optionally available: Itedpfx Aqewyqrkovek - Supports - Side guide, single or double-sided Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalized, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Tilstand: som ny (utstillingsmaskin), Byggeår: 2015, Knapp Roller Conveyor Transfer Shuttle – Belt Transfer Pusher 90° 2900/2270-510-450 RA2417 Manufacturer: Knapp Direction of travel: bidirectional Roller width (RW): 450 mm Nominal/Outer width (OW): 510 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller pitch: 90 mm Frame height: 90 mm Drive section height: +250 mm downward Distance between belts: 330 mm Belt width: 250 mm Number of accumulation zones: 5 Zone size: 700 mm Transfer pusher belt motor: SEW motor 3x 300-500V Conveyor roller motor: Interroll EC300 Conveying speed: with Interroll EC 300, freely adjustable up to 1.25 m/s Scope of delivery: includes supports, pneumatic pusher lift, and end stop Optional accessories available: • Supports • Side guides (single-sided or double-sided) Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg, Germany Itsdpewyqrwsfx Aqvek For individual, professional consultation, simply contact us. Reach us easily by phone or email. We are happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Tilstand: brukt, Dematic Conveyor System Roller Conveyors 16000-600-540 RA2340 The roller conveyor shown in the picture does not correspond exactly to the one in the listing, but it is the same model and in the same condition. Only the dimensions differ. Further information: Manufacturer: Dematic Type: Accumulation Roller Conveyor Year of manufacture: unknown Available conveyor lengths (FL): 16,000 mm Accumulation zone length: 750 mm Nominal/Outer width (NB): 600 mm Condition: Good (used) Roller width (RB): 540 mm Roller pitch: 125 mm, variable Drive type: SEW geared motor Conveyed goods weight: up to 30 kg Accumulation zone mechanism: Light barrier with pneumatic valve and cylinder The following accessories are optionally available, for example: - Additional elements for expansion - Frequency inverter - Supports - Side guides Isdpfjvmuhksx Aqvetk Price: Net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us directly. Reach out to us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Tilstand: brukt, Byggeår: 2016, Utstyr: firehjulsdrift, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All servicing carried out by Liebherr and fully documented. Last service by Liebherr on 20.06.2024 at 14,138 hours. 4-cylinder inline engine, water-cooled with turbocharging Emission stage IV, 155 hp Hydrostatic drive with 3-speed gearbox. Speed reduced to 20 km/h, 40 km/h possible (currently 36 km/h). Itedoyqn Hrjpfx Aqvsk Air conditioning! * Automatic central lubrication system – Liebherr factory installation * Rear area monitoring with camera (functionality not tested!) * Ride control (boom suspension) * Lamp brackets in steel instead of plastic * Fuel pre-filter * Access aid for easier cleaning of the front windscreen * Hinged window in driver's door * Premium display with touchscreen * "Comfort" driver's seat with pneumatic suspension (with seat heating) * Liebherr operating lever (joystick) * Adjustable steering column * 4 work lights on the front of the cab roof * 2 work lights on the rear of the cab roof * Automatic bucket return * Reversible fan (reverse fan) for cleaning the cooling package * Fluff screen in front of the radiator package prevents contamination of the coolers * Pre-separator for engine intake air (TOP-AIR) * Preparation for beacon (warning light) at rear center of cab * Acoustic reversing warning system (reverse beeper) * Radio pre-installation * Street approval possible!! Tyres: 20.5 x 25 L3 Front axle: 2 x 30% Tyres: 20.5 x 25 L3 Rear axle: 2 x 30% Net price with fixed-mount 2.5 m³ bucket: €44,900 Optional equipment at additional cost: - Hydraulic quick coupler €3,550 - High volume bucket 4 m³ €4,500 - Pallet forks 5 or 8 t from €2,190 Optionally available with scale, e.g. used Pfreundt WK50–WK60 from €3,900 All prices plus 19% VAT or for export. Sale only to commercial customers or for export. Sold as-is, as viewed. No warranty or guarantee. Indicated kilometer and operating hour readings are taken from the meter – accuracy cannot be guaranteed! Subject to prior sale. This vehicle description does not constitute a binding offer and is not to be considered guaranteed characteristics. The description and details serve only as general identification of the machine and do not represent a warranty in the legal sense. Details may not be complete. Stated information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the stipulations in the order confirmation and invoice are valid. The seller assumes no liability or warranty. This advertisement may contain errors in typing or data transmission. The seller has not examined the machine. Equipment must be checked separately where applicable.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: A11300182, Byggeår: 2009, driftstimer: 21 820 h, lastekapasitet: 45 000 kg, løftehøyde: 15 100 mm, drivstofftype: diesel, egenvekt: 67 900 kg, drivtype: Diesel, Full container reachstacker Chassis number: A11300182 Transmission: Dana TE32 Iedpfxozkcy Se Aqvetk Condition: Operational and fully functional Technical condition: Good Tyre type front: Pneumatic Tyre type rear: Pneumatic Description:

Tilstand: brukt, Dematic Conveyor System Accumulation Roller Conveyors 22000-500-440 RA2342 The roller conveyor shown in the image does not match the listing exactly, but it is the same model and in the same condition. Only the dimensions differ. Further Information Manufacturer: Dematic Type: Accumulation Roller Conveyor Year of manufacture: unknown Conveyor length (FL): 22,000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation zone length: 700 mm Accumulation control: Plug and play, electro-pneumatic Roller pitch: 125 mm Drive type: Head drive SEW Eurodrive Conveying speed: approx. 0.5 m/s Optional accessories available, e.g.: - Frequency converter for stepless speed control - Supports - Side guides Price: Net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For personalized, professional advice, simply get in touch with us. Contact us easily by phone or email. We are happy to assist you with planning and implementing your projects. Ijdsvpmk Njpfx Aqvjtk We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Byggeår: 2024, driftstimer: 5 h, maskin-/kjøretøynummer: 6151570000, Fra vårt demonstrasjonsverktøylager, testet og fullt funksjonelt: Chicago Pneumatic batteridrevet høymoment-skrutrekker CP8613 Demonstrasjonsverktøy med lader + 2 batterier (36 V 2,5 Ah) Isdpfx Asv Tbz Deqvotk Nøyaktighet (6 sigma): +/- 4% Tomgangshastighet: 10 o/min Dreiemomentområde min/maks: 300 til 1300 Nm Arbeidsturtall: 390 til 1040 Nm Utgang: 3/4" firkant Lengde: 318 mm Vekt med batteri og reaksjonsarm: 5,3 kg Andre verktøy for industriell produksjon og vedlikehold er tilgjengelig på forespørsel.

Tilstand: god (brukt), Byggeår: 2017, totalvekt: 403 kg, volumstrøm: 199,2 m³/t, trykk (maks.): 10 stang, PROD. - CHICAGO PNEUMATIC TYP - CPVS25 S/N - ITJ109435 ÅR - 2017 EFFEKT (kW) - 18,5 KAPASITET (m3/min) - ved 7,5 bar: 3,32; ved 8,5 bar: 3,14; ved 10 bar: 2,92 TRYKK (bar) - 10 FREKVENSOMFORMER - ja Iodpfxorb A Sfo Aqvstk

Tilstand: helrenovert (brukt), Byggeår: 2025, driftstimer: 50 h, maskin-/kjøretøynummer: 3018-04, Fabrication origin: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centres: 650 mm Grinding capacity SpW+bs: 80 Stroke: 700 LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic travel: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec. Maximum table swiveling: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid travel: 60 mm Infeed depth in diameter: 3.4 mm Feed 1: 0.012–6 mm/min Feed 2: 0.012–1.2 mm/min Incremental feed: 0.001–0.05 mm WHEELHEAD Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Rotational speed: 1670/2110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW Itsdow T Sd Topfx Aqvok WORKHEAD Swiveling range: 0–90° Stepless speed range: 30–1000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. part weight between centres: 130 kg Load capacity for unsupported grinding: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for roundness correction: ±40 μm TECHNICAL PERFORMANCE GUARANTEED WORK ACCURACY Straightness over 630 mm: 0.003 mm Roundness during unsupported grinding: 0.0003 mm UTILITY CONNECTION VALUES Max. absorbed power: 13 kVA Permissible voltage fluctuation: −15% / +10% Permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar All technical data provided without engagement and subject to errors or omissions.

Tilstand: brukt, Dematic Conveyor System Accumulation Roller Conveyors Accumulation Roller Conveyor 18000-500-440 RA2343 The roller conveyor shown does not exactly match the depiction in the advertisement, but it is the same model and in the same condition. Only the dimensions differ. Further information: Manufacturer: Dematic Type: accumulation roller conveyor Year of manufacture: unknown Conveyor length (FL): 18,000 mm Condition: good (used) Roller width (RB): 440 mm Ijdpsvpmlaefx Aqvjtk Nominal/Outer width (NB): 500 mm Accumulation zone length: 700 mm Accumulation zone control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive type: end drive SEW Eurodrive Conveying speed: approx. 0.5 m/s Options available, e.g.: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice simply contact us. Feel free to get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you soon. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Tilstand: brukt, Dematic Conveyor System Accumulation Roller Conveyors Accumulation Roller Conveyor 24000-500-440 RA2346 Ijdpfxjvq Tchj Aqvjtk The roller conveyor shown does not exactly match the one listed in the advertisement, but it is the same model and in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulation Roller Conveyor Year of manufacture: Unknown Conveyor Lengths (FL): 24,000 mm Condition: Good (used) Roller Width (RB): 440 mm Nominal/External Width (NB): 500 mm Accumulation Space Size: 700 mm Accumulation Control: Plug and Play, Electro-pneumatic Roller Pitch: 125 mm Drive Types: Head Drive SEW Eurodrive Conveying Speed: approx. 0.5 m/s Optionally available, for example: Frequency inverter for stepless speed regulation Supports Side guides Price: Net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Tilstand: brukt, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: A11300181, Byggeår: 2009, driftstimer: 23 737 h, lastekapasitet: 45 000 kg, løftehøyde: 15 100 mm, drivstofftype: diesel, egenvekt: 67 900 kg, drivtype: Diesel, Fullcontainer Reachstacker Itodpfx Aqszkcy Ejvsk Chassis number: A11300181 Transmission: Dana TE32 Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Pneumatic Rear tyres type: Pneumatic Description:

Tilstand: svært god (brukt), Byggeår: 2010, ENGEL DUO 5550/1100 Injection Moulding Machine Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Specific injection pressure: 2,180 bar Injection volume: 2,740 cm³ L/D ratio of screw: 22 Cylinder: M3 type, bimetallic – enhanced wear and corrosion resistance Screw: S4V type, heat-treated, chrome-plated, with armored edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Clearance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic core pulls: 2+1 Pneumatic core pulls: 1+1 Heating zones GK: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed software: Mikrograf Plus Mikroplast QDP PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° Isdpfxew U Sz Ie Aqvotk 2 vacuum circuits 1 pressure circuit for sprue removal