Kjøp brukt Fritsch Sheeter (364)
Sorter resultater
- Laveste pris Høyeste pris
- Nyeste annonser Eldste annonser
- Korteste avstand Største avstand
- Nyeste produksjonsår Eldste produksjonsår
- Siste oppdatering Eldste oppdatering
- Produsenter fra A til Å Produsent fra Z til A
- Relevans
- Laveste pris
- pris
- Høyeste pris
- pris
- Nyeste annonser
- Innstillingsdato
- Eldste annonser
- Innstillingsdato
- Korteste avstand
- avstand
- Største avstand
- avstand
- Nyeste produksjonsår
- produksjonsår
- Eldste produksjonsår
- produksjonsår
- Siste oppdatering
- oppdatering
- Eldste oppdatering
- oppdatering
- Produsenter fra A til Å
- produsent
- Produsent fra Z til A
- produsent
- Betegnelse fra A til Å
- Betegnelse
- Betegnelse fra Z til A
- Betegnelse
- Modell fra A til Å
- Modell
- Modell fra Z til A
- Modell
- Laveste referanse
- referanse
- Høyeste referanse
- referanse
- Korteste driftstid
- Driftstid
- Lengste driftstid
- Driftstid
- relevans
- relevans
Annonse
Tyskland
1 007 km
Avtrekksanlegg Höcker Polytechnik Multistar 2018, 2
Höcker PolytechnikMulitstar JQ6/5
Ring
Tilstand: brukt, Byggeår: 2018, maskin-/kjøretøynummer: 519553, Central Extraction System Höcker Polytechnik
with rotary valve and/or dust bins.
(Option: Rotary valve instead of dust bins)
Manufacturer: Höcker Polytechnik
Model: Multistar JQ6/5 131/20717A
Year of manufacture: 11/2018
Dust characteristic: Dust and shavings
Material throughput: not specified
Jet-pulse filter cleaning
Airflow: approx. 22,000 m³/h
Disposal method: open
Clean air circulation: air recirculation
Residual dust content: 0.1 mg/m³ based on dust
1 unit
Filter system, galvanized
- Year of manufacture: 11/2018
- Multistar JQ6/5 131/20717A
- Filter area: approx. 131 m²
- Filter bags: 120 pieces
- Filter bag diameter: 170 mm
- Filter bag length: 2,070 mm
- Filter cleaning: air jet, compressed air
- Filter housing made of galvanized sheet steel
- Access door, access ladder, maintenance platform
- Certified explosion venting panels
- Raw gas section as large expansion chamber
- Exhaust connection as required on site
- Filter base frame in welded steel construction, hot-dip galvanized
Fpedpfeya Idvsx Ai Neh
- Incl. dry riser fire line, C-connection
- *Optionally with 6 chip bins or large rotary valve*
2 units
Clean air fans DER 404/400/18.5-2
- Airflow: 11,000 m³/h per fan
- Direct-drive fans
- Galvanized sheet steel
- Installed horizontally in the Multistar series
- Electrical power per fan: 18.5 kW
- Total airflow: 22,000 m³/h
- Total pressure increase: 4,600 Pa
1 unit
Air recirculation duct components
- incl. galvanized ducts
- Must be adapted for new site installation
1 unit
Control cabinet
With Siemens S7-1200 PLC
Dust-tight standard steel sheet control cabinet designed as wall-mounted cabinet, built and fully wired according to VDE regulations 0100, 0113 and DIN 57113.
The scope of delivery includes all components necessary for control as well as the circuit diagrams.
Configured for:
· Jet-pulse cleaning control
· Control of 2 fans
· 6x automatic fan startup with machine activation
· Pressure monitoring indicator lights
· 3x control for shut-off dampers
· Rotary valve control
Installation dimensions:
- Length: 3,960 mm
- Width: 3,380 mm
- Height: 5,900 mm
(may vary depending on configuration)
Electrical connection rating:
- approx. 38 kW
- 400V/50Hz
- Control voltage 230V AC/24V DC
Stored at warehouse
Annonse
Wiefelstede
804 km
Blikklemme 0-55 mm
REMACU 9.0
Ring
Tilstand: god (brukt), Plate clamp, sheet clamp, beam clamp, beam claw, plate grab, material grab, material gripper
- Sheet clamps
Fedpfx Ajb A S A Eei Nsph
- Clamping range: 0 to 55 mm
- Load capacity: 9,000 kg
- Quantity: 2 clamps available
- Price: per piece
- Weight: 28 kg/piece
Annonse
Wiefelstede
804 km
Plateklemme 10-27 mm
Siegert2500 kg
Ring
Tilstand: brukt, Plate clamp, plate claw, beam clamp, beam claw, sheet metal gripper, material gripper
Fpjdpfodi Slbsx Ai Nsh
- Plate claws
- Clamping range: 10 to 27 mm
- Load capacity: 2,500 kg
- Quantity: 1x clamp available
- Price: per piece
- Weight: 14 kg/piece
Annonse
Østerrike
1 454 km
Giljotinsaks motorisert
HERAHSS3
Ring
Tilstand: brukt, Byggeår: 1984, Plate thickness: 3 mm
Total power requirement: 2.2 kW
Throat depth: 200 mm
Motor: 2.2 kW
Sheet length: 1100 mm
Stroke: 56 mm
Motorized guillotine shear Hera HSS III
1100 mm x 3 mm
Space requirement approx. WxDxH 2000x1500x1800 mm
Fsdpfov H Hfnox Ai Noph
The machine is used but in good condition.
Annonse
Wiefelstede
804 km
Platepakke-pall
StahlTyp 10 to
Ring
Tilstand: god (brukt), Plate bundle pallet, sheet metal spreader beam, sheet bundle rack
- Load capacity: 10 t
- Suitable for crane/forklift operation
Fsdpfxob A I R Rj Ai Njph
- Dimensions: 3000/1800/H420 mm
- Quantity: 3 units available
- Price: per unit
- Weight per unit: 300 kg
Annonse
Niederlangen
851 km
Avgratningsmaskin
NKOAnfassystem B22 ZERO
Ring
Tilstand: ny, Diameter -- mm
Workpiece length -- mm
Workpiece width 0 - 20 mm
Speeds 2850 rpm
Fpjdeppgcvopfx Ai Njh
Angle range 0 - 60° (stepless)
Machine weight approx. 19.5 kg
Maximum chamfer width 20 mm + face machining
Designed for chamfering and deburring straight edges, including FACING – the removal of unwanted material layers from the workpiece end face, such as burrs resulting from flame cutting on sheet metal. Specially developed for creating visible chamfers and weld seam preparations. Powerful electric drive for heavy-duty applications.
* High-performance motor
* Stepless adjustment of working angle between 0° - 60°
* FACING – edge processing at 0° for removal of unwanted material layers after flame cutting
* Unique mechanical scale for chamfer width adjustment ensures greater precision
* Very compact and ergonomic design for high working productivity
* All-round protective frame for damage prevention and versatile grip options
* With suitable accessories, pipes from D=150 mm can also be processed
* Additional adjustable handle
- Chamfer width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa
- Motor: 1100 W
We are pleased to optionally offer you a pipe beveling attachment (D=150 mm) for this unit.
Annonse
Niederlangen
851 km
Avgratningsmaskin
NKOAnfassystem UZ18 HARDWORKER
Ring
Tilstand: ny, Diameter -- mm
Workpiece length -- mm
Workpiece width 18 mm
Angle range 15° - 50°
Machine weight approx. 110 kg
Chamfering System UZ18 HARDWORKER
Maximum chamfer width 18 mm with automatic feed
The UZ18 Hardworker is one of the most powerful chamfering machines with automatic feed on the market. It is suitable not only for workshops but also for on-site assembly. The machine features a stepless adjustment system for the working angle. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with automatic feed, making operation with the UZ18 Hardworker very comfortable.
* Suitable for conventional steel (up to a strength of 600 MPA/87022 PSI), brass, copper and aluminium materials
* For chamfering workpieces with minimum dimensions of 70 x 150 x 6 mm
* Sheet thickness application range: 6 – 40 mm
* The bevel angle can be easily adjusted steplessly from 15° to 50° without the need to change any parts
* Double-sided bevel (X, K) without material handling
* Simple connection to the 3D manipulator for easier operation and handling
* Silent operation
* Equipped with automatic feed
* Suitable for stationary or mobile use
* The machine can process large workpieces without any support at a speed of 1.9 m/min
* Smaller workpieces are placed directly into the machine
Fjdpfek Egrtjx Ai Noph
- Max. bevel width (hypotenuse): 18 mm
- Steplessly adjustable angle: 15° - 50°
- Application range sheet thickness: 6 – 40 mm
- Motor: 750 W
- Feed speed: 1.9 m/min
- Weight: 110 kg
- Dimensions: 438 x 719 x 644 mm
We are also happy to offer you an optional 3D manipulator (mobile) for this device.
Annonse
Niederlangen
851 km
Avgratningsmaskin
NKOAnfassystem UZ15 Rapid
Ring
Tilstand: ny, Diameter -- mm
Workpiece length -- mm
Workpiece width 15 mm
Angle range 15-50°
Sheet thickness 6-40 mm
Total power requirement 1.5 kW
Feed speed 3.5 m/min
Dimensions 530 x 395 x 860 mm
Machine weight approx. 94 kg
The UZ15 RAPID is one of the fastest beveling machines with automatic feed available on the market. It is suitable not only for workshops but also for on-site assembly jobs. The machine features a continuously adjustable bevel angle system. Additionally, it comes equipped with an automatic feed, ensuring extremely comfortable operation with the UZ15 RAPID.
- Suitable for conventional steel (up to a strength of 600 MPa/87022 PSI), brass, copper, and aluminum materials
- For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm
- Suitable for sheet thicknesses from 6 – 40 mm
- The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to change any parts
- Double-sided beveling (X, K) without material repositioning
- Simple connection to the 3D manipulator for easier operation and handling
- Quiet operation
- Equipped with automatic feed
Fodjk Uqhajpfx Ai Noph
- Suitable for stationary or mobile use
- The machine can process large workpieces without additional support at a speed of 3.5 m/min
- Smaller workpieces can be inserted directly into the machine
- Discounted price available when purchasing the UZ15 RAPID together with the 3D manipulator
Annonse
Niederlangen
851 km
Avgratningsmaskin
NKOAnfassystem UZ12 ULTRALIGHT
Ring
Tilstand: ny, Diameter -- mm
Workpiece length -- mm
Workpiece width 12 mm
Angle range 30/45/22.5/37.5/50 °
Machine weight approx. 30 kg
Chamfering System UZ12 ULTRALIGHT - KIT 30° + 45°
Maximum chamfer width 12 mm with automatic feed
The UZ12 ULTRALIGHT is one of the lightest chamfering machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops, but also for assembly operations. The machine is equipped with automatic feed, which makes working with the UZ12 ULTRALIGHT very comfortable.
* For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminium materials
* For chamfering workpieces with minimum dimensions of 65 x 60 x 3 mm
* Suitable for sheet thicknesses from 3 to 35 mm
* Chamfering pipes from an inner diameter of 95 mm
* Variable adjustment of the required chamfer using interchangeable holder kits for each specified angle
* Double-sided bevel (X, K) without material handling
* Silent operation
* Equipped with automatic feed
* Stationary or mobile use
* The machine can process large workpieces without any support at a speed of 1.8 m/min
* Smaller workpieces can be fed directly into the machine
* Lightweight, compact design operable by one operator
* Thermal motor protection
Fpedpfxeppgcyj Ai Noh
- Max. chamfer width (hypotenuse): 12 mm
- Chamfer angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT)
- Sheet thickness capacity: 3 – 35 mm
- Motor: 400 W
- Feed speed: 1.8 m/min
- Dimensions: 470 x 294 x 523 mm
We are also pleased to offer you an optional 3D manipulator (mobile) for this device.
Annonse
Wakefield
965 km
B1 enkeltsidig lamineringsmaskin
Autobond105 THS
Ring
Tilstand: svært god (brukt), Byggeår: 2003, Ref:11066. 2003 Autobond 105 THS.
Fsdpsydnxnjfx Ai Neph
B1, enkelsidet, helautomatisk termisk lamineringsmaskin.
Meget god stand, kjørt mindre enn 1,5 millioner ark!
Utstyrt med:
- Heidelberg dypstabel sugemater med bakadskillelse
- 250 mm (10") diameter, høypolert krom lamineringsrull
- Lamineringsnipetrykk opptil 6 metriske tonn
- Film monteres på en hurtigskift luftaksel
- Kanttrimmer og perforeringsmekanisme
- Pneumatisk clutch sikrer presis filmspenning
- Sveitsiskprodusert temperaturkontrollenhet
- Skjæreaggregat – integrert avskillervalse med anti-krøllstang
- Leveringsbord for pall
Tilbehør:
- Ioniser Pro statisk eliminator
Spesifikasjon:
Maks arkmål: 105 cm (40”) x 76 cm (30”), Min: A4
Papirvekt: 90 gsm (80lb) – 650 gsm (24 PT)
Filmområde: 8 mikron jomfrufilm & 24 mikron (1 mil) til 75 mikron (3 mil) termisk
Toppfart: 45 m (150’) per minutt med stigende stabelmater.
Annonse
Piera
2 158 km
Sirkelsaks
TIMACTZZ-1604
Ring
Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Byggeår: 2018, TIMAC TZZ-1604 Circular Disc Cutter with Double-Station Automatic Stacker. Year 2018
Inspected and ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double-station automatic stacker that allows continuous operation without stoppages. Especially suitable for the manufacture of ends and lids, circular parts, and blanks for deep-drawing or stamping processes.
Main features:
• Circular cutting by adjustable blades
• Diameter adjustment system for various disc formats
• Double-station automatic stacker
Suction cup arm for picking up each disc
Possibility to remove full stacks without stopping production
Doors with latches and safety interlocks
• Integrated electrical and pneumatic system
Independent electrical panel
PLC control
Safety compliant with CE regulations
Main technical data:
• Sheet thickness:
Up to 3 mm (carbon steel / aluminium)
Up to 1.5 mm (stainless steel)
• Blade diameter: 100 mm
• Installed power: approx. 16 kW
• Electrical supply: 400 V / 50 Hz
• Pneumatic pressure: 6 bar
Fjdpfxsy Edk Rs Ai Njph
• Year of manufacture: 2018
Annonse
Piera
2 158 km
Tverrsnittskjær for bånd
LARACDCH-1400
Ring
Tilstand: svært god (brukt), Byggeår: 2018, LARA CDCH-1400 SHEAR (year 2018)
With drag table.
Hydraulic shear designed for transversal cutting of strip and handling of sheet metal scrap in coil feeding lines. Supplied together with a drag table, allowing for comfortable and safe evacuation of cut material and maintaining a clean, continuous production process.
Robust equipment, of heavy-duty industrial construction, especially suitable as an auxiliary unit in slitting, stamping, or coil feeding lines.
Key features
• Hydraulic cross-cut shear
• Hydraulic drive
• Robust design for continuous operation
• Clean, precise cutting of metal strip
• Integrated drag table
• Facilitates evacuation of scrap and remnants
• Improves ergonomics and tidiness along the line
• Keeps the working area clear
• Heavy-duty industrial construction
• Rigid and stable frame
Fpjdpfsy Edlhsx Ai Nsh
• Designed to be integrated at the same height as the LARA feeder/straightener
• Easy integration into existing lines
• Safety system
• Integrated into the line's control system
• Designed according to CE regulations
Working materials
• Carbon steel
• Stainless steel
• Aluminium and light alloys
Main technical data
• Maximum working width: up to 1,400 mm
• Type of drive: hydraulic
• Working pressure: 4–6 bar (pneumatic control system)
• Power supply: 400 V / 50 Hz
Annonse
Goldenstedt
855 km
Pilar borerigg
FLOTTSB 23
Ring
Tilstand: brukt, Bore capacity in steel (diameter): 23 mm
Throat depth: 300 mm
Drilling stroke: 150 mm
Table size: 300 x 410 mm
Spindle taper: MT 2
Total power requirement: 1.4 kW
Machine weight approx.: 315 kg
Space requirements approx.: 700 x 900 x 1900 mm
Fodpfxofbh Ale Ai Noph
The machine has toppled over. In the process, a sheet metal cover and 2 levers of the cross lever were broken off. The spindle runout has been tested and is in good condition. A function video is available. The machine can be inspected and tested on site.
Annonse
İkitelli OSB
2 566 km
175 tonn x 3700 mm CNC hydraulisk kantpresse
CRONOSSTECHHPB B175-3700
Ring
Tilstand: ny, Byggeår: 2026, effekt: 15 kW (20,39 hk), pressekraft: 175 t, slagslengde: 260 mm, driftshastighet: 10 mm/s, revershastighet: 130 mm/s, halsdybde: 410 mm, stempelplatens lengde: 3 700 mm, Utstyr: CE-merking, dokumentasjon / manual, sikkerhetslysbarriere, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake
The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending applications, offering a bending force of 175 tons and a bending length of 3700 mm.
Standard Features
Stroke: 260 mm
Open Height (Daylight): 465 mm
Throat Depth: 410 mm
Bending Length: 3700 mm
Distance Between Uprights: 3200 mm
ESA S830 CNC Controller
10” 2D touchscreen
Manual bending sequence and collision control
Automatic crowning calculation
Angle measurement and correction
2D drawing capability
2 USB ports
Offline software
CT-BEND Servo Motorized Back Gauge
X-axis travel: 750 mm
Speed: 250 mm/s
Accuracy: ±0.05 mm
R-axis travel: 250 mm
Hardened ball screw
Linear guide system
Optional X-axis travel: 1000 mm
Tooling System
2 back gauge fingers
European-type Promecam quick-release clamping system
CRONOSSTECH custom narrow lower beam
Eurostamp ES1260 upper tool
Eurostamp ES2067 lower tool
Amada-compatible tooling system
Standard Equipment
B Series open frame design
GIVI linear encoders
LED lighting
VDE electrical panel
Schneider or Siemens electrical components
HAWE hydraulic block
Eckerle pump
Siemens drive
Single pedal operation
Energy-saving standby function
2 adjustable front support arms
Optional Features
CT-BEND X+R servo motorized back gauge
AKAS II front safety laser system
PLC safety module
Rear light curtains
Delem DA53Tx CNC controller
CNC-controlled motorized crowning system
X-axis extension to 1000 mm
Technical Specifications
Bending Force: 175 Tons
Bending Length: 3700 mm
Distance Between Uprights: 3200 mm
Stroke: 260 mm
Open Height (Daylight): 465 mm
Throat Depth: 410 mm
Table Height: 955 mm
Machine Length: 5300 mm
Machine Width: 2430 mm
Fpedozb Inkspfx Ai Neh
Machine Height: 2990 mm
Approach Speed: 180 mm/s
Return Speed: 130 mm/s
Bending Speed: 10 mm/s
Oil Tank Capacity: 180 L
Weight: 10,500 kg
Main Motor: 15 kW
X Axis Speed: 300 mm/s
R Axis Speed: 250 mm/s
This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey. 🇹🇷
Annonse
İkitelli OSB
2 566 km
220 tonn x 6100 mm CNC hydraulisk kantpresse
CRONOSSTECHHPB B220-6100
Ring
Tilstand: ny, Byggeår: 2026, effekt: 22 kW (29,91 hk), pressekraft: 220 t, slagslengde: 260 mm, driftshastighet: 10 mm/s, revershastighet: 110 mm/s, halsdybde: 410 mm, stempelplatens lengde: 6 100 mm, Utstyr: CE-merking, dokumentasjon / manual, sikkerhetslysbarriere, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake
Fpjdpfx Aijzbyvtj Njh
The HPB B220-6100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is engineered for the precise, powerful, and repeatable bending of long sheet metal parts with a bending force of 220 tons and a bending length of 6100 mm. It is ideal for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications.
This machine offers high efficiency with its ESA S630 CNC control unit, servo-motorized backgauge system, European-style tool clamping system, robust frame structure, and professional equipment set.
Standard Features
- Stroke: 260 mm
- Open Height: 465 mm
- Throat Depth: 410 mm
- Bending Length: 6100 mm
- Distance Between Columns: 5100 mm
- ESA S630 CNC Control Unit
- 10” 2D touch graphic display
- Manual bending sequence & collision calculation
- Angle correction calculation
- Angle measurement & correction
- 2D drawing
- 2 USB ports
- Offline software
CT-BEND Servo Motorized X-Axis Backgauge
- X-axis travel: 750 mm
- X-axis speed: 250 mm/s
- Accuracy: ±0.05 mm
- Manual R-axis travel: 250 mm
- Heavy-duty steel frame
- Hardened ball screw
- Hardened linear guides
- Optional X-axis travel: 1000 mm
Tooling & Backgauge System
- 2 straight-type, 3-stage backgauge fingers
- Manual Z-axis movement
- European-style quick-change Promecam upper tool holder
- CRONOSSTECH special narrow bottom table
- Standard upper tool ES1260, H: 67 mm, 85°, R: 0.8 mm
- Standard lower tool ES2067, 60 x 60 mm, V: 16-22-35-50 mm
- Amada-compatible tooling system
Other Standard Equipment
- Open-frame B series design
- Black plexiglass safety panels
- Single pedal system
- GIVI linear scales
- LED upper beam lighting
- VDE electrical panel
- Schneider or Siemens electrical components
- Hoerbiger / HAWE hydraulic block
- Eckerle pump
- Siemens drive
- Energy-saving standby feature
- 2 standard sliding front support arms
Optional Features
- AKAS II front safety laser system + PLC + rear light barriers
- Delem DA53Tx 15” CNC control unit
- Delem DA58Tx 18.5” CNC control unit
- CNC-controlled motorized crowning system
- X-axis extension up to 1000 mm
- Additional front support arm
- Additional backgauge fingers
- Special bending tools
Technical Specifications
- Bending Force: 220 Tons
- Bending Length: 6100 mm
- Distance Between Columns: 5100 mm
- Stroke: 260 mm
- Open Height: 465 mm
- Throat Depth: 410 mm
- Table Height: 1060 mm
- Machine Length: 7560 mm
- Machine Width: 2570 mm
- Machine Height: 3440 mm
- Approach Speed: 150 mm/s
- Return Speed: 110 mm/s
- Bending Speed: 10 mm/s
- Oil Tank Capacity: 290 L
- Machine Weight: 20,000 kg
- Main Motor Power: 22 kW
- Backgauge X-Axis Speed: 300 mm/s
- Backgauge R-Axis Speed: 250 mm/s
This machine is manufactured by CRONOSSTECH in Turkey. The country of origin is Turkey.
Annonse
İkitelli OSB
2 566 km
60 tonn x 1250 mm CNC hydraulisk kantpresse
CRONOSSTECHHPB A60-1250
Ring
Tilstand: ny, Byggeår: 2026, effekt: 4 kW (5,44 hk), pressekraft: 60 t, slagslengde: 210 mm, driftshastighet: 10 mm/s, revershastighet: 120 mm/s, halsdybde: 410 mm, stempelplatens lengde: 1 250 mm, Utstyr: CE-merking, dokumentasjon / manual, sikkerhetslysbarriere, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake
The HPB A60-1250 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is developed for precise sheet metal bending applications, offering 60 tons of bending force and a bending length of 1250 mm.
Featuring the ESA S630 CNC control unit, servo-motorised backgauge system, a compact frame, and professional tooling equipment, this press brake delivers high precision and efficiency for workshops, metal fabrication companies, and industrial manufacturers.
Standard Features
- Stroke: 210 mm
- Daylight (Open Height): 415 mm
- Throat Depth: 410 mm
- Bending Length: 1250 mm
- Distance Between Columns: 1100 mm
- ESA S630 CNC Control Unit (3-4 Axis)
- 10” 2D touchscreen graphic display
- Manual bending sequence and collision detection calculation
- Angle correction calculation (Crowning)
- Angle measurement and correction
- 2D drawing support
- 2 USB ports
- Offline programming software
- CT-BEND Servo Motorised X Axis Backgauge System
- X axis travel: 750 mm
- Speed: 130 mm/sec
- Accuracy: ±0.10 mm
- Manual R axis movement: 190 mm
- Steel frame construction
- Hardened ball screw
- Hardened linear guide system
- Optional 1000 mm X axis travel
Backgauge Fingers
- Quantity: 2
- Flat type
- 3-stage (10 mm / 20 mm / 30 mm)
- Manual Z axis movement
- Structure to prevent sheet sagging
European Type Manual Promecam Upper Tool Holder E7
- Quick tool change
- Safe operation
- Structure to prevent die drop
CRONOSSTECH Special Narrow Lower Table
- 70 mm or 90 mm lower table
- T-slot available upon request
Standard Upper Die ES1260
- Die height: 67 mm
- Die angle: 85°
- Radius: 0.8 mm
- Material: C45
- Maximum capacity: 100 Tons/Meter
- Amada compatible
Standard Lower Die ES2067
- Four-way V dies (16-22-35-50 mm)
- Die height: 60 mm
- Die angle: 85°
- Material: C45
- Maximum capacity: 80 Tons/Meter
- Amada compatible
A Series Open Frame Design
- CRONOSSTECH Premium open frame
- Wide viewing area
- Ergonomic design
- Professional appearance
Additional Equipment
- Single pedal system (P2)
- GIVI linear scales
- Upper beam LED lighting
- Electrical cabinet compliant with VDE standards
- Schneider or Siemens electrical components
- Hoerbiger (HAWE) hydraulic block
- Eckerle hydraulic pump
- Energy-saving standby function
Front Support Arms
- 2 standard sliding front support arms
- Height adjustable
- Scale integrated measurement system
- Supports the operator
Optional Features
- AKAS II Front Safety Laser System + PLC + Rear Light Curtains
- Finger protection system
- Laser-based safety system
- Enhances operator safety
- CE compliance
- Maximum working distance: 4.3 metres
Technical Specifications
- Bending Force: 60 Tons
- Bending Length: 1250 mm
- Distance Between Columns: 1100 mm
- Stroke: 210 mm
- Daylight (Open Height): 465 mm
- Throat Depth: 410 mm
- Table Height: 885 mm
- Machine Length: 3060 mm
- Machine Width: 2195 mm
- Machine Height: 2730 mm
Fjdpfezbyu Nox Ai Noph
- Approach Speed: 150 mm/sec
- Return Speed: 120 mm/sec
- Bending Speed: 10 mm/sec
- Oil Tank Capacity: 95 L
- Machine Weight: 3400 kg
- Main Motor Power: 4 kW
- Backgauge X Axis Speed: 300 mm/sec
- Backgauge R Axis Speed: 250 mm/sec
This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷
Annonse
İkitelli OSB
2 566 km
20 mm x 3100 mm hydraulisk giljotinsaks
CRONOSSTECHHGM B20-3100
Ring
Tilstand: ny, Byggeår: 2026, styretype: CNC-styring, automatiseringsgrad: automatisk, aktueringstype: hydraulisk, kontrollerprodusent: ELGO, kontrollermodell: P40T 5,7", arbeidsbredde: 3 100 mm, maks. platetykkelse: 20 mm, maks. platetykkelse stål: 20 mm, justering av bakstop: CNC-styrt, effekt: 37 kW (50,31 hk), Utstyr: CE-merking, Typeplate tilgjengelig, dokumentasjon / manual, fingerbeskyttelse, fotfjernkontroll, nødstopp, sikkerhetslysbarriere, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear
Manufactured in Turkey by CRONOSSTECH, the HGM B20-3100 Hydraulic Guillotine Shear is engineered for heavy industry, steel construction, shipbuilding, the energy sector, and high-capacity metalworking applications, with a 20 mm sheet cutting capacity and 3100 mm cutting length.
Equipped with the ELGO P40T touchscreen CNC control unit, motorized backgauge system, Rexroth hydraulic system, and dual-speed cutting technology, it delivers high performance and precision cutting.
Standard Features
Throat Depth: 250 mm
Cutting Length: 3100 mm
Cutting Angle: 2.75°
Distance Between Columns: 3410 mm
Cutting Capacity: 20 mm
ELGO P40T 5.7” Touchscreen CNC Control Unit
5.7” TFT touchscreen
Manual operation mode
Single-piece processing
Program memory
Digital outputs up to 2A
Automatic cutting angle and hold-down calculation based on material
Automatic cutting program
Rear sheet support system
RTS (Return To Sender) function
Manual Blade Clearance Adjustment System
Programmable Backgauge Retraction System
Automatic lifting for parts larger than 1000 mm
CRONOSSTECH X-Axis Motorized NC Controlled Backgauge
X-axis travel: 1000 mm
Speed: 150 mm/s
Accuracy: ±0.05 mm
Fpsdpfozbyupex Ai Neh
Steel frame construction
Hardened ball screw
Optional: 1250 mm or 1500 mm
Front Support Arms
Length: 1000 mm
Rule measurement system
T-slot
Flip-up stopper
Openable Front Finger Protection System
1000 mm openable front guard
Optional full-length openable guard system
Upper Blade
2 cutting edges
Capacity: 450 N/mm²
Lower Blade
4 cutting edges
Capacity: 450 N/mm²
Foot Pedal with Emergency Stop
Rear Safety System (EOS2E 2BX)
2 laser beams
Type 2 – SIL1 – SILCL1 safety level
Monitoring height: 510 mm
Response time: 3 ms
Protection rating: IP65 / IP67
Power supply: 24V DC
Emergency Stop Buttons
Shadow Line Lighting for Cutting Line
Ball Transfer Table
Schneider or Siemens Electrical Equipment (400V / 50Hz)
CRONOSSTECH Premium Front and Rear Guarding
Professional appearance
Wide field of view
Ergonomic design
Rexroth Hydraulic System
Dual-Speed Cutting System
Two cutting speeds
Faster processing of shorter pieces
High-speed cutting up to 60% of maximum capacity
Energy-Saving Standby Mode
Optional Features
1250 mm or 1500 mm X-axis backgauge
Full-length openable front guard system
Technical Specifications
Cutting Capacity (450 N/mm²): 20 mm
Cutting Capacity (700 N/mm²): 13 mm
Cutting Length: 3100 mm
Cutting Angle: 2.75°
Number of Hold-Down Cylinders: 17
Cutting Speed / Fast Mode: 6 / 9 strokes per min
Distance Between Columns: 3410 mm
Table Height: 925 mm
Table Width: 605 mm
Throat Depth: 250 mm
Backgauge Travel (X Axis): 1000 mm
Machine Length: 4790 mm
Machine Width: 3850 mm
Machine Height: 2540 mm
Oil Tank Capacity: 495 L
Motor Power: 37 kW
Machine Weight: 19 tons
This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷
Annonse
İkitelli OSB
2 566 km
100 tonn x 2600 mm CNC hydraulisk kantpresse
CRONOSSTECHHPB B100-2600
Ring
Tilstand: ny, Byggeår: 2026, effekt: 7,5 kW (10,20 hk), pressekraft: 100 t, slagslengde: 260 mm, driftshastighet: 10 mm/s, revershastighet: 135 mm/s, halsdybde: 410 mm, stempelplatens lengde: 2 600 mm, Utstyr: CE-merking, dokumentasjon / manual, sikkerhetslysbarriere, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake
Standard Features
Stroke: 260 mm
Daylight (Open Height): 465 mm
Throat Depth: 410 mm
Bending Length: 2600 mm
Distance Between Uprights: 2150 mm
ESA S830 CNC Control Unit (3-4 Axis)
10” 2D touchscreen graphical display
Manual bend sequencing and collision check calculation
Angle correction calculation (crowning)
Angle measurement and correction
2D drawing support
2 USB ports
Offline programming software
CT-BEND Servo Motorized X-Axis Backgauge System
X-axis travel: 750 mm
Speed: 250 mm/s
Accuracy: ±0.05 mm
Manual R-axis travel: 250 mm
Heavy duty steel body construction
Hardened ball screw
Hardened linear guide system
Optional 1000 mm X-axis
Backgauge Fingers
2 pcs
Flat type
3-position (10 mm / 20 mm / 30 mm)
Manual Z-axis movement
Sheet sag preventing design
European Type Quick Tool Clamping System (Promecam E7)
Fast tool change
Safe operation
Practical and time-saving structure
CRONOSSTECH Special Narrow Lower Table
70 mm or 90 mm lower table
T-slot option can be applied for specific tooling
Standard Upper Tool ES1260
Tool height: 67 mm
Tool angle: 85°
Radius: 0.8 mm
Material: C45
Max. capacity: 100 Ton/meter
Compatible with Amada
Standard Lower Tool ES2067
4-channel V opening (16-22-35-50 mm)
Tool height: 60 mm
Tool angle: 85°
Material: C45
Max. capacity: 80 Ton/meter
Compatible with Amada
B Series Open Cabin Design
Black plexiglass safety panels
Wide field of view
Professional appearance
Ergonomic design
Additional Equipment
Single pedal system (P2)
GIVI linear scales
LED lighting for upper beam
Electrical cabinet according to VDE standards
Schneider or Siemens electrical components
Hoerbiger (HAWE) hydraulic block
Eckerle hydraulic pump
Siemens drive
Energy-saving Standby function
Front Support Arms
2 standard sliding front support arms
Height adjustable
Ruler-type measuring system
Operator support
Optional Features
Fpjdpfx Aezbyt Ssi Noh
CT-BEND Servo Motorized X + R Axis Backgauge System
Servo motorized X and R axis movement
X-axis travel: 750 mm
Accuracy: ±0.05 mm
X-axis extendable up to 1000 mm
CNC-Controlled Motorized Crowning System
MVD wedge and G.E.C. motor-driven system
Automatic calculation by CNC
Faster setup time
Higher bending accuracy
Longer machine life
AKAS (FPSC) Front Safety Laser System + Rear Light Curtain
Laser-based finger protection system
Enhances operator safety
Fast detection and response time
CE compliant
Maximum working distance: 4.3 meters
Technical Specifications
Bending Force: 100 Ton
Bending Length: 2600 mm
Distance Between Uprights: 2150 mm
Stroke: 260 mm
Daylight: 465 mm
Throat Depth: 410 mm
Table Height: 885 mm
Machine Length: 4220 mm
Machine Width: 2230 mm
Machine Height: 2950 mm
Approach Speed: 200 mm/s
Pressing Speed: 10 mm/s
Return Speed: 135 mm/s
Oil Tank Capacity: 170 L
Machine Weight: 6430 kg
Main Motor Power: 7.5 kW
Backgauge X-Axis Speed: 300 mm/s
Backgauge R-Axis Speed: 250 mm/s
This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷
Annonse
Ahaus
938 km
Hakkemaskin
FIM / AMADAVERSA 204
Ring
Tilstand: brukt, Byggeår: 1989, Plate thickness 4.0 mm ST
Plate thickness 3.0 mm VA
Table size 1200 x 780 mm
Blade length 200 x 200 mm
Strokes per minute approx. 60 min
Adjustable angle from 15° to 150°
Motor power 4.0 kW
Machine weight approx. 1200 kg
Required space approx. 1700 x 1000 x 1500 mm
Equipment features:
Fpjdpfx Aisxaa N Ns Nsh
- Electro-hydraulic notching machine, with angle adjustment 15° - 150°
* Angle adjustment via handwheels
- Front operation panel
- Plexiglass guard for improved visibility
- Hardened blades, suitable for cutting stainless steel
- Planed table surface
* To prevent 'jamming' or 'slipping' of the sheet
- 2x positioning stops
* With movable and replaceable stop bars
- Lateral scrap ejection
- Freely movable foot switch
- Operating manual
* Machine link:
?machineno=1008-9397088
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HGD 3100-10
Ring
Tilstand: ny, Plate width: 3100 mm
Plate thickness: 10.0 mm
Plate thickness for stainless steel: 6.0 mm
Hold-downs: 14 pieces
Strokes per minute: 13
Oil capacity: 260 liters
Cutting angle: 2.0°
Throat depth: 350 mm
Motor power: 22.0 kW
Backgauge – adjustable: 1,000 mm
Weight: 10,575 kg
Dimensions (LxWxH): 4.05 x 2.5 x 2.17 m
Manufacturer ERMAK offers you with the HGD hydraulic swing beam shear a robust and durable machine for economical sheet metal processing. With this compact all-round machine, you can increase your productivity. The HGD hydraulic swing beam shear supports you in precise, fast, and cost-efficient cuts in your daily workflow. The use of hydraulic hold-downs to secure the sheet and a support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control allows for the use of various sheet types that are already stored in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set electro-hydraulically by the CNC controller but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via the touchscreen. Furthermore, the controller offers memory for cutting programs with cutting sequences.
-----
Robust electro-hydraulic CNC swing beam shear
* Including CYBELEC CNC touch screen control
* Including CNC electro-hydraulic blade gap adjustment
-----
Equipment:
- CNC electro-hydraulic swing beam shear
- Including CYBELEC CNC touch screen controller, model “CybTouch 8”
- Selected functions of the CNC control:
* Backgauge preselection – X axis
* Blade gap adjustment
* Piece counter
* Cutting length limitation
* Material selection, including plate thickness
* Cutting line illumination (for scribing), and many more
- Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis)
* On ball screw spindles
* Automatic swing-away at max. travel for longer cuts
* Including selectable retract function (“swing-away function”)
* Positioning accuracy 0.1 mm
* Travel speed 80 mm/sec
- 1x side gauge with T-slot and mm scale
Fpsdpfx Asxabdbsi Noh
- 2x front support arms with T-slot and mm scale
- Ball rollers in the front support table
- Hinged finger guard with safety switch
* Finger guard with viewing windows for cutting to scribe line
- Cutting line illumination with shadow projection
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain behind the machine (safety device)
- Movable foot switch
- CE mark/conformity declaration
- Operating manual + electrical diagram + hydraulic diagram
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HVR 4100-10 HH MONO
Ring
Tilstand: ny, Plate width: 4100 mm
Plate thickness: 10.0 mm
Plate thickness (stainless steel): 6.0 mm
Hold-down clamps: 28 pcs
Stroke rate: 18 strokes/min
Oil capacity: 260 liters
Cutting angle: 0.5 - 2°
Control: CYBELEC Cybtouch
Motor power: 22.0 kW
Backgauge (adjustable): 1000 mm
Dimensions (L-W-H): 6100 x 2580 x 2460 mm
Weight: 15,100 kg
The manufacturer ERMAK offers you with its hydraulically guided guillotine shear series HVR a robust and durable machine for efficient sheet metal processing. This compact all-round machine helps you increase your productivity. The hydraulic guillotine shear model HVR supports precise, fast, and cost-effective cutting in your daily workflow. The use of hydraulic hold-down clamps for securing sheet metal and a support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC controller allows the use of different sheet types already stored in the material library. After selecting the maximum thickness and material type, the optimal cutting gap and cutting angle are set automatically via the CNC electro-hydraulic controller, but can also be adjusted manually. The position and retract function of the motorized backgauge can be conveniently set via touchscreen. Additionally, the controller offers storage for cutting programs with cutting sequences.
-----
Robust electro-hydraulic CNC guillotine shear with linear guide
* Including CYBELEC CNC touch screen controller
* Including CNC electro-hydraulic cutting gap adjustment
* Including CNC electro-hydraulic cutting angle adjustment
-----
Features:
- CNC electro-hydraulic guillotine shear (linear guided)
- Including CYBELEC CNC touch screen controller, model "CybTouch 8"
- CNC controller functions include:
* Backgauge preset - X-axis
* Cutting gap adjustment
* Piece counter
* Cutting length limitation
* Material selection, including sheet thickness
* Cutting line illumination (cutting on scribed line) ... and many more
- Motorized backgauge, travel range = 5.0 - 1,000 mm (X-axis)
* On ball screw spindles
* Automatically swings up at maximum travel for longer cuts
* With selectable retract function ("Swing-Away Function")
* Positioning accuracy 0.1 mm
* Approximate travel speed 80 mm/sec
- 1x side gauge, with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball rollers in the front support table
- Foldable finger guard with safety switch
* Finger guard with viewing windows for cutting on scribed line
- Cutting line illumination with shadow outline
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain at rear of machine (safety feature)
- Movable foot switch
- CE mark/conformity declaration
Fpsdpfx Aijxabwuo Neh
- Operating instructions + wiring diagram + hydraulic diagram
Including special equipment:
- Pneumatic sheet support device for thin sheet cutting
* Monoblock design
Tillitsmerke
Autoriserte forhandlere sertifisert av Machineseeker

Annonse
Ahaus
938 km
Svingbar bøyemaskin
BERNARDOTB 2020
Ring
Tilstand: ny, Plate width: 2020 mm
Sheet thickness: 2.0 mm
Opening width: 122 mm with segments
Max. bending angle: 0 - 135°
Working height: 930 mm
Total power requirement: manual operation
Machine weight: approx. 1020 kg
Space requirements: approx. 2.75 x 0.56 x 1.26 m
Features
- Segmented upper beam for a wide range of bending options
- Versatile bending machine suitable for tinsmiths and repair workshops
- High upper beam for producing high-edged profiles
- Quick and easy bending process using bow handle
- Easy adjustment of the upper beam for efficient operation
- Bending angle set via scale
- Individually removable segments for box bending
- Large opening width for processing large workpieces
- Robust construction in modern design
Scope of delivery
Fpsdpfxexaamhs Ai Njh
- Segmented upper beam
- Bending segments: 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm
Annonse
Ahaus
938 km
Svingbar bøyemaskin
BERNARDOTBS 1020
Ring
Tilstand: ny, Plate width: 1020 mm
Sheet thickness: 2.0 mm
Opening width: 48 mm
Max. bending angle: 0 - 135°
Working height: 900 mm
Total power requirement: manual operation
Machine weight: approx. 285 kg
Space requirement: approx. 1350 x 820 x 1140 mm
Features:
- Segmented upper and bending beams for a variety of bending options
- Clamping via foot pedal
- Hands remain free for optimal positioning of the sheet
- Universally applicable bending machine for sheet metal workshops and repair operations
- Robust construction with modern design
- Manual bending machine for standard bending tasks
- Segmented upper beam for a wide range of bending applications
- Excellent price-performance ratio
- Fast and simple bending process using a bow handle
- Non-slip rubber coating on the foot pedal for safe operation
Fpsdpfoxaaufsx Ai Njh
- Easy adjustment of the lower beam to suit different sheet thicknesses
- High upper beam for producing profiles with high upstands
Scope of delivery:
- Segmented upper beam
- Segmented lower beam
- Manual back gauge
- Bending segments: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm
Annonse
Ahaus
938 km
Platesaks - hydraulisk
ERMAKCNC HGS 3100-6 HH
Ring
Tilstand: ny, Plate width 3100 mm
Plate thickness 6.0 mm
Plate thickness for stainless steel 4.0 mm
Frame opening 3100 mm
Hold-downs 14 units
Oil capacity 150 ltrs
Strokes per minute 18
Shearing angle 1.2°
Control CYBELEC CybTouch
Total power requirement 11.0 kW
Fedpfx Aijxaa D Hs Nsph
Weight 6,300 kg
Dimensions L-W-H 4,000 x 2,100 x 1,640 mm
The manufacturer ERMAK offers you a robust and durable machine for economical sheet metal processing with its hydraulic swing beam shear, model series HGS. This compact all-rounder lets you increase your productivity. The hydraulic swing beam shear HGS supports you with precise, fast and cost-efficient cuts in your day-to-day operations. Hydraulic hold-downs secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient shearing for your operator. The CNC control allows you to use different sheet materials already stored in the integrated material library. After selecting the maximum thickness, the optimal blade gap is automatically set electro-hydraulically by the CNC control but can also be adjusted manually. The position and retract function of the motorized backgauge can be set easily via touchscreen. Furthermore, the controller offers storage for cutting programs with cut sequences.
----- robust electro-hydraulic CNC swing beam shear
* including CYBELEC CNC touchscreen controller
* including CNC electro-hydraulic blade gap adjustment
-----
Equipment features:
- CNC electro-hydraulic swing beam shear
- including CYBELEC CNC touchscreen controller, model "CybTouch 8"
- some CNC control functions:
* Backgauge setting – X axis
* Blade gap adjustment
* Piece counter
* Cutting length limitation
* Material selection, including sheet thickness
* Cutting line illumination (cutting to scribe line) ...and many more
- Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis)
* on ball screw spindles
* automatically swings up at maximum travel range for longer cuts
* including retract function selectable ("Swing-Away function")
* positioning accuracy 0.1 mm
* travel speed 80 mm/sec
- 1x side gauge with T-slot and mm scale
- 2x front support arms with T-slot and mm scale
- Ball rollers in the front support table
- Fold-up finger guard with safety switch
* finger guard with viewing windows for cutting to scribe line
- Cutting line illumination with shadow function
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain at the rear of the machine (safety feature)
- Free-moving foot switch
- CE mark/declaration of conformity
- Operating manual + circuit diagram + hydraulic diagram
including special equipment:
- Pneumatic sheet support device for thin sheet cutting
Annonse
Ahaus
938 km
Hakkemaskin
SIMASVAV 226/B
Ring
Tilstand: brukt, Byggeår: 1996, Plate thickness 6.0 mm steel
Plate thickness for stainless steel 4.0 mm
Plate thickness 8.0 mm aluminium
Angle adjustable from 30° to 140°
Table: 950 x 890 mm
Blade length 220 x 220 mm
Stroke 35 cycles/min
Working height 1150 mm
Total power 3.0 kW
Weight 800 kg
Dimensions (L-W-H) 1200 x 1200 x 1400 mm
New price approx. €20,000
Special price on request
Fsdpfsxabx Esx Ai Nsph
- In inspected condition – machine video -
?v=QmUbaV41BfA
Equipment:
- Electro-hydraulic notching machine
* with adjustable angle 30° – 140°
- Cutting capacity up to 6.0 mm sheet thickness (R42/MM2)
- Made of special spheroidal cast iron GS500
- The cutting motion is from top to bottom
- Robust worktable made of steel with conical grooves
* ensuring optimum grip for the positioning angles
- The scales are embossed
- Automatic blade gap adjustment (patented)
- System for automatic adjustment of the gap between upper and lower blades
* allows simultaneous cutting of different thicknesses
- 2x angle-adjustable positioning stops
- Plexiglas finger guard
- 1x mobile foot switch
- Scrap chute, lateral
- Lifting hook for easy transportation
- Operating manual (PDF)
Vi gjør det enklere for deg å søke: "fritsch sheeter"
Du får nye tilbud på e-post umiddelbart og gratis.
Du kan når som helst enkelt avslutte søkeoppdraget.



















































































































































