Kjøp brukt Chaina Toalettpapirproduksjonsmaskin (57)

Tilstand: god (brukt), Byggeår: 2001, 4 stk. elektriske kjettingtaljer Fabrikat: CHAIN MASTER SCENEBYGG Type: VBG 70 LIFTKET Årsmodell: 2001 Løftehøyde: 20 m Løftekapasitet: 1000 kg uten betjeningskontroll. Godewd Tgfopfx Abkokc

Tilstand: brukt, TEKNISKE DATA - Antall akser: 5 FRESESPINDEL - Verktøyopptak: BT30 - Spindeleffekt: 5,5 [kW] - Spindelhastighet: 20 000 [o/min] LINEÆRE AKSER - Vandring X/Y/Z-akse: 500/380/320 [mm] - Rask travershastighet (X/Y/Z): 48 [m/min] - Avstand fra bord til spindelnese: 305–665 [mm] VERKTØYSKIFTER - Type verktøyskifter: Arm chain changer - Antall verktøy i magasin: 25 - Verktøybyttetid: 0,7 [sek] BORD - Bordstørrelse: 510 × 385 [mm] - Maks. bordbelastning: 200 [kg] ELEKTRISK FORSYNING Gkodpey N Edgofx Abkec - Spenning: 400 [V] - Total effekt: 11,2 [kW] VEKT OG DIMENSJONER - Plassbehov: 1500 × 2075 [mm] - Maskinhøyde: 2400 [mm] - Maskinvekt: 2600 [kg] TILBEHØR - Styring: YASKAWA SIEMENS YS840DI - Teach-In programmering: Shopmill - Tre-farget statuslampe - Rundbord type: integrert 4. og 5. akse * Produsent: NIKKEN * Modell: 5AX130-HYA (2011) * Vandring 4. akse: -120°/+30° [grader] * Min. oppløsning 4. akse: 0,001 [grader] * Vandring 5. akse: 360 [grader] * Min. oppløsning 5. akse: 0,001 [grader] * Spennediameter: 130 [mm] - Kjølemiddelstank - Elektrisk transformator

Tilstand: brukt, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 001645U, Til salgs Brukt Abus enkelbjelke traverskran ca. 19.500 mm x 5.000 kg. * Tørt lagret * Teknisk 100% i orden og kontrollert Alle våre nye og brukte kraner som vi leverer ferdig montert, leveres inkludert garanti! Vi kan om ønskelig levere våre tilbudte kraner inkludert: * Tilpasning av lengde og/eller høyde og eventuell omlakkering * Strømtilførsel / strømskinner * Radiostyring * Tandemstyring * Montering og inspeksjon Hos Jan Reiling B.V. kan du også få: * Nye løfteanlegg * Reservedeler til dine løfteanlegg * Svingkraner * KBK X/Y-systemer * Kjettingtaljer Gkodpfx Abjygrivjkjc * Wiretaljer * Service og vedlikehold * Sertifisering av ditt løfteutstyr I tillegg har vi et eget lager med ca. 15.000 Demag reservedeler. For mer informasjon, se nettsiden til Jan Reiling B.V. Kraner, traverskran, løpekatt, verkstedkran, lagerkran, talje, kraner, hallkraner, brokraner, verkstedkraner, lagerkraner, løfteutstyr, cranes, universalkraner, heis. Traverskran, laufkran, overhead crane. Enkelbjelke, einträger, single girder. Kjettingtalje, kjettingtaljer, chain hoists.

Tilstand: svært god (brukt), Byggeår: 2006, CNC machining center with horizontal moving column design, featuring automatic tool changer, linear digital scales on the X, Y, and Z axes, and Siemens 840D computer numerical control. Includes all standard machine equipment: Travel ranges: X = 1500 mm (60”) Y = 1500 mm (60”) Z = 810 mm (32”) Spindle speed range: 20 – 6000 RPM Operator station mounted on platform with CRT Portable pushbutton station for manual machine control Pushbutton for machine setup Safety door mounted on platform with electric interlock Cartridge-type spindle with automatic power input and quick-change system Oblong matrix tool magazine for 90 tools, double chain, mounted on the carriage for interference-free tool storage Gkjdpjycxnkofx Abkec Tool chain guard with electric interlock Tool changing mechanism mounted on the carriage, facilitating tool changes between the tool magazine and spindle Complete unit comprised of a double arm and its corresponding tool changing mechanism, swinging the tool chain from the magazine to the spindle and vice versa, operated by a hydraulic cylinder. Double arm. Rotation powered by a hydraulic motor, advance/retract movement operated by hydraulic cylinder.

Tilstand: brukt, Byggeår: 2008, Transnorm Angled Infeed Diverting and Merging Conveyor with Roller Cross 45°/90°-900-800 RA2236 Year of manufacture: 2008 Conveying angles (MZ + MR): 45° + 45° Overall length (ML): 1150 mm Nominal/outside width (NB): 900 mm Usable width (NUB): 800 mm Gjdperi Snlefx Abkokc Conveying speed: please contact us Roller diameter: 50 mm, steel + conically coated plastic rollers Drive: SEW geared motor Electrical data: 0.55 kW, 380-480 V Axle spacing: 75 mm Height: 120 mm, 450 mm with motor Chain-driven Optional accessories available: - Supports - Side guides, single-sided or double-sided - Frequency converter for stepless speed control - Ball transfer table for infeeding and diverting All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional advice, simply contact us. Please feel free to call or email us. We are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Byggeår: 2018, Tilstand: helrenovert (brukt), TCC 120/168 fly cutting machine, manufactured by OTO MILLS, recently refurbished. Complete fly cutting unit including: - Carriage drive (accelerator) - Main carriage motor - TCC120 cutting unit with base featuring linear guides, cutting head, clamping unit, and tube support on the discharge side - REFURBISHED control panel - REFURBISHED electrical cabinet - Hydraulic unit - Cable drag chain - All existing documentation, manuals, and drawings. Specifications: - Saw type: Friction Gedpfxjvtpp Ne Abkekc - Material thickness: 1 – 6 mm - Standard tube length: 3 – 12 m - Round tube diameter: 42 – 168 mm - Square tube diameter: 40x40 – 130x130 mm - Rectangular tube diameter: 50x30 – 180x80 mm - Max. speed: 120 m/min - Length tolerance: +/-2 mm Saw type: Friction Standard tube length: 3 – 12 m Round tube diameter: 42 – 168 mm Square tube diameter: 40x40 – 130x130 mm Rectangular tube diameter: 50x30 – 180x80 mm Max. speed: 120 m/min Length tolerance: +/-2 mm

Tilstand: brukt, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 001653U, lastekapasitet: 6 300 kg, Til salgs Brukt Abus enkeltbjelke traverskran ca. 20 500 mm x 6 300 kg. Ref. 001653U * Tørt lagret * Teknisk 100 % i orden og gjennomgått Alle våre nye og brukte kraner som vi leverer ferdig montert, leveres med garanti! Gkodpezik Sgsfx Abksc Vi kan levere våre tilbudte kraner med følgende tilleggstjenester: * Tilpasning av lengde og/eller høyde, og eventuell omlakkering * Strømskinner / langsforsyning * Radiostyring * Tandemstyring * Montering og inspeksjon Hos Jan Reiling B.V. kan du også finne: * Nye løfteinnretninger * Reservedeler til dine løfteinnretninger * Svingkraner * KBK X/Y systemer * Kjettingtaljer * Ståltau-taljer * Service og vedlikehold * Sertifisering og kontroll av løfteutstyr Vi har også et eget lager med ca. 15 000 Demag reservedeler. For mer informasjon, se nettsiden til Jan Reiling B.V. Kraner, traverskran, verkstedkran, lagerkran, talje, heiseutstyr, brokran, enkelbjelkekran, løfteutstyr, travers, løpekatt, løfteanordning. Traverskran, brokran, overhead crane. Enkeltbjelke, single girder. Kjettingtalje, chain hoists.

Tilstand: brukt, Byggeår: 2008, maskin-/kjøretøynummer: 1160821, BA 600-2 CNC, Horizontal Milling and Boring Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of construction: 2008 Used, operational Travel distances: X-axis 600 mm Y-axis (change position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, mounted on the side Feed/rapid traverse speeds: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Mean acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute position measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK –A 100, horizontal side-by-side arrangement Spindle distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swivel carrier with face gear, max. load capacity 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition between machining and loading area Tool magazine: 2 x 40 tools HSK-A 100 chain magazine, position-coded Automatic pickup Tool change time (chip/chip) 4.9 sec Max. tool diameter 100 mm 250 mm with adjacent slot free Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimal quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions, with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Dimensions, without paper band filter: approx. 5.15 x 6.60 x 4.20 m Miscellaneous: - Good condition, commensurate with age - Annual maintenance regularly performed by previous owner --- Sold without clamping devices --- --- Without foundation elements --- Immediately available, scheduling by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to setup location by customer/buyer! Dimensions/transport dimensions of the main machine components: 1 pc Machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000kg 1 pc Table unit mm 4400 x 2400 x 3400 approx. 10,000kg Gksdpsy Ah Rcofx Abksc Plus peripherals such as chip conveyor, small parts, covers, etc. Available at short notice!!!!! Scheduling by arrangement

Tilstand: brukt, MAIR TFA3/D/12.5 Double-Ended Tube Facing and Beveling Line Gjdpeyl Upvofx Abkskc The MAIR TFA3/D/12.5 double-ended beveling line is a high-performance industrial solution designed for simultaneous internal and external facing and beveling of steel tubes. This system enables the machining of two tubes at the same time, finishing both ends with high precision and repeatability. Developed for demanding production environments, this line is suitable for hot- or cold-rolled carbon steel tubes, pickled or zinc-aluminium coated. Thanks to its CNC-controlled beveling units, automated tube conveying and positioning system, and integrated chip evacuation and blow-through cleaning systems, the MAIR TFA3/D/12.5 guarantees high productivity, consistent surface quality, and significantly reduced manual intervention. Scope of supply The MAIR TFA3/D/12.5 double-ended beveling line is supplied complete and includes the following major equipment: - Accumulation table for individual tube extraction via chain conveyors - Walking beam transport system for synchronised transport of two tubes - Two CNC beveling machines, each equipped with: - High-strength welded steel frame - Double beveling unit with servo-driven linear movement - Tube clamping systems with interchangeable jaws - Tool disc for facing and internal/external beveling - Hydraulic toolholder locking system (Morse taper) - Centralized lubrication system - Toolholder presetting bench - Control panel - Chip conveyors located beneath the machines - Motorised rollers and adjustable tube clamping stations - Blow-through station for internal tube cleaning with length adjustment system - Tool kit (to be confirmed) Technical data - Manufacturer: MAIR - Model: TFA3/D/12.5 - Application: Double-station internal and external tube facing and beveling - Material: Carbon steel tubes (hot-rolled, cold-rolled, pickled, or zinc-aluminium coated) - Tube diameter: 17.2 – 89 mm (3/8" - 3") - Tube length: 4 – 12.5 m

Tilstand: brukt, MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1 Manufactured by MAIR SCOPE OF SUPPLY 1 Loading table equipped with: - Motorized sling loader for loading complete bundles - Lateral chain conveyor for feeding tubes individually - Upper support with vertical adjustment (to prevent double feeding when working with small diameters) - Length stop and tube feeder Gkedpfx Absymax Eekoc 2 TRA3000 cutting machine with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for accurate positioning of cutting heads - Centralized tube transport system with adjustable production cycle 3 RA1 individual collecting cradle with: - Independent cradles for collecting cut tubes - Lateral dividers between cradles to adapt the cradle length to tube length - Motorized endless belts for collecting soft tubes 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine, including photoelectric barriers and an emergency line Note: The owner installed safety barriers so the machine complies with “safety conformity” regulations. TECHNICAL SPECIFICATIONS Manufacturer: MAIR RESEARCH Model: TRA 3000/7/7/CAR +RA1 Annual maintenance: performed by MAIR Spain Maximum input tube length: 7000 mm Bundle loader: 3 tons Maximum loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (Height x Width): 12x16-60x40 mm (see note) Min.-Max. wall thickness: 0.8 – 4.0 mm (according to yield strength limits) Cut lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disk diameter: 300 mm Voltage: 380 / 50 V/Hz, 3-phase Compressed air: Must be supplied filtered and lubricated at 6 bar Total installed power: Approx. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Annual maintenance: performed by MAIR Maximum input tube length: 7000 mm Bundle loader: 3 tons Max. loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (height x width): 12x16-60x40 mm (see note) Min.-Max. wall thickness: 0.8 – 4.0 mm (according to yield strength) Cut lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disk diameter: 300 mm Voltage: 380/50 V/Hz, 3-phase Compressed air: Must be supplied filtered and lubricated at 6 bar Total installed power: Approx. 21kW – 50Amp

Tilstand: svært god (brukt), WEINIG Hydromat H23 line, S/N 87321, year of manufacture 1999, Ref. No. 103437 WEINIG HighMech E-1 cross conveyor with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing machine equipped with reinforced KASCHWIG 3-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed 8 – 80 m/min • Feed motor 18.5 kW • 1st bottom spindle 11.0 kW • 2nd right spindle 11.0 kW • 3rd left spindle 11.0 kW • 4th right spindle 11.0 kW • 5th left spindle 11.0 kW • 6th top spindle 15.0 kW • 7th bottom spindle 11.0 kW • 8th top spindle 15.0 kW • 9th bottom spindle 15.0 kW • 10th universal spindle 11.0 kW (4-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/brake combinations Gsdpfjwvqklex Abkskc • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 powered rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralized lubricating points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing control cabinet • Operating manual, spare parts list, and wiring diagram • Machine supplied without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG parts used: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL-bearings All motors with NEW bearings NEW electronic soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos, technically in excellent condition Infeed mechanization unrefurbished – complete parts – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale reserved.

Tilstand: brukt, Byggeår: 1999, VHS Chain Conveyor RA1844 Gkedjtt E R Iepfx Abkoc Type: VHS Chain Conveyor 3340-480-410 Conveyor length (CL): 3340 mm Chain pitch (CP): 410 mm Nominal/outer width (NW): 480 mm Constructed height (CH): 120 mm Options available: - Supports - Single-sided or double-sided side guides - Frequency inverter All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For tailored, professional advice, simply get in touch with us. Contact us by phone or email—we are happy to assist you in planning and realising your projects. We look forward to hearing from you. With best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Tilstand: brukt, Schulz roller curve conveyor, right-hand, with straight section and 90° pusher 450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Usable width (UB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Mean radius: 1,000 mm Straight section: Conveyor length (CL): 650 mm Usable width (UB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Roller pitch: 75 mm Drive motor: 0.25 kW Conveying speed: v = 0.3 m/sec Drive: round belt, curve + straight section 2nd electrical drive for chain pusher Shipping dimensions: LxWxH: 2100 x 700 x 800 mm Scope of delivery: includes double-sided side guide, without supports (supports available on request) Gkodpek Aa Ilsfx Abkec Options available: 2 double supports, height-adjustable, top of roller +/-100 mm Frequency inverter for stepless speed adjustment Price plus VAT, ex central warehouse Dr. Sonntag KG 97076 Würzburg For individual, expert advice, please contact us directly by phone or email. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Tilstand: brukt, MAIR Automatic Packing Machine, MPS RH150/D/4/SL & SIGNODE Automatic Strapping Unit M400 1. MAIR PACKING MACHINE, model MPS RH150/D/4/SL The MPS RH150/D/4/SL Pat. model automatically packs round tubes into hexagonal bundles. The machine automatically performs the strapping operation in a fixed position, with the bundle moving laterally and automatically stopping at the programmed strapping positions. It consists of: Gedpfxjymahyj Abkekc - Four-tube chain conveyors with support teeth and intermittent drive for lifting one tube at a time, coming from the threading machine, up to the alignment zone. - A powered roller to align the tube against an adjustable end stop before forming the row. - Two buffer areas for tube rows; necessary during the evacuation cycle of the bundle. - A sturdy welded structural steel frame, forming a bridge structure. - A tube row handling system that picks up one tube row at a time from the second row storage and places it onto the bundle forming supports. - Handling is performed by a series of electromagnets executing a rotary movement during the row transfer cycle. - Four powered vertical supports for bundle formation and clamping. They are fitted with adjustable blades depending on the required bundle size and shape, and are lowered to allow the bundle to be placed on the evacuation cart. - Powered evacuation cart sliding on floor-mounted rails, equipped with driven bottom rollers and pairs of free vertical restraining rollers. - Powered flat conveyor for transporting the bundle after the strapping zone. - Powered storage chains suitable for moving the bundles towards the preselected quantity. - Drainage station for lifting the bundle, allowing coolant to drain from the tubes; equipped with two hydraulic devices powered by a hydraulic unit. - Control cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred by the powered rollers of the evacuation cart to the automatic system. It stops at the programmed strapping positions to allow automatic application of the steel straps. It consists of: - SIGNODE automatic strapping machine model M400/PA/TSM for vertical strapping - Floating pneumatic strapping head for 32 mm (1¼") wide steel strap with 0.9 mm wall thickness - 450 kg strap dispenser with electric pay-off - Control panel 3. WEIGHING STATION, model KG8/DY The station weighs tube bundles using load cells. Powered storage chains move the bundles to the weighing position. The weighing station is located below pneumatic lifting devices which raise the bundle to allow weighing operation. It consists of: - Lower frame for floor mounting, complete with four supports, lugs, and load cells - Upper clamping frame, capable of receiving bundle lifting devices - Compact weight transmitter 4. SOFTWARE, model DATAPACK 3/T The Datapack Management System software allows the operator to: - Monitor and supervise tube production in real time. - Set a new bundle configuration c...

Byggeår: 1985, Tilstand: svært god (brukt), maskin-/kjøretøynummer: AV, 1 Demag / AV Auguste Victoria pillar slewing crane, 500 kg payload / lifting capacity Gjdpfjd Dfp Tox Abkskc Approx. 10 units of this crane available. Outreach 4–5 m, 500 kg payload. Also available with 2 jibs!!!!! PLEASE INQUIRE – Pictures available by email. Technical specifications: - Maximum payload at full outreach: 500 kg / 0.5 t - Overall height: 4.5 m - Outreach: 4–5 m - Underside of jib: 3.7 m - Hook height: 3 m - Total weight approx. 1,400 kg Equipped with Demag PK2/PK5 (1,000 kg) chain hoist, 500 V Year of manufacture approx. 1980–1995 Complete with column, jib, chain hoist, cable trolley, carriage, and small components Slewing range approx. 270° Item location: 75053 Gondelsheim, Germany The crane is fully dismantled and immediately available See photos for details Shipping by freight carrier or collection Please inquire about shipping costs based on your postal code

Tilstand: brukt, Byggeår: 2007, maskin-/kjøretøynummer: 001491U, Til salgs Brukt Abus enkebjelke traverskran ca. 7.550 mm x 500 kg. * Tørt lagret * Teknisk 100% i orden og kontrollert Alle våre nye og brukte kraner som vi leverer og monterer, leveres med garanti! Vi kan om ønskelig levere våre tilbudte kraner inkludert: * Tilpasning av lengde og/eller høyde samt eventuell ny lakkering * Strømskinner / langsmating * Radiostyring * Tandemstyring * Montering og inspeksjon Hos Jan Reiling B.V. kan du også få: * Nye løfteinnretninger * Reservedeler til dine løfteinnretninger * Svingkraner * KBK X/Y-systemer * Kjettingtaljer * Wiretaljer * Service og vedlikehold * Sertifisering av ditt løfteutstyr Vi har i tillegg et eget lager med ca. 15.000 Demag-deler. For mer informasjon, se Jan Reiling B.V. sin nettside. Kraner, traverskran, enkeltbjelkekran, verkstedkran, lagerkran, talje, brannkran, hallkran, brokran, verkstedkran, lagerkran, løfteutstyr, cranes, universalkran, hoist. Gsdpfx Abew I N T Uekekc Traverskran, laufkran, overhead crane. Enkebjelke, enkelträger, single girder. Kjettingtalje, kjettingtrekk, chain hoists.

Tilstand: brukt, Schulz roller curve conveyor, left-hand, with straight section and 90° pusher 450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Usable width (UW): 390 mm Overall/outer width (OW): 450 mm Inner radius (IR): 795 mm Straight section: Conveying length (CL): 1600 mm Usable width (UW): 390 mm Gjdpsk Aa Iwefx Abkokc Overall/outer width (OW): 450 mm Rollers, galvanized Roller pitch: 75 mm Including 90° chain pusher, chain spacing 450 mm Geared motor: 0.25 kW Conveying speed: v = 0.3 m/sec Drive: round belt for curve & straight section Second electric drive for chain pusher Side guides: included on both sides, as shown Scope of delivery: without supports (on request, please ask for 3 pieces if needed) Optional: supports Price: plus VAT, ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: in advance following invoice Delivery time: approx. 3 - 5 working days after receipt of payment For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics

Byggeår: 2010, Tilstand: svært god (brukt), maskin-/kjøretøynummer: RESHGFW, DEMAG KBK Crane System Crane Runway – various cranes with different dimensions in stock – please inquire! Gkedpfxorwi Sle Abksc Load Capacity / Lifting Capacity 125 KG – 1000 KG – Please inquire Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with elevated travel mechanism – crane girder is positioned between both running rails for maximum lifting height System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/suspenders, etc. incl. chain hoist Crane is dismantled and immediately available Several cranes available, pictures are for illustration purposes Very good condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are standard stock items! Other KBK systems also in stock. Load capacity 125 KG – 1600 KG Please inquire about your crane runway with required load capacity and dimensions without obligation.

Byggeår: 2026, Tilstand: helrenovert (brukt), OFF-LINE STRAPPING MACHINE .90.4.F Manufactured by MAIR Renovated in 2026 Scope of supply: 1. New chain conveyor system, with 4 lifting chains, for transferring tubes from the roller conveyor. 2. Automatic tube-by-tube feeding unit 3. Single-row preparation section 4. Automatic bundle forming unit, with interchangeable components: Gjdpfx Ajymav Robkokc - 4 Bundle retention supports for square bundles - 4 Bundle retention supports for hexagonal bundles 5. Strapping bridge with SIGNODE manual strapping unit 6. Mobile cart for front extraction of finished bundles 7. Storage unit for finished bundles 8. New electrical control panel with operator control console 9. New emulsion draining and bundle weighing system Tube diameter (round): 16–90 mm Tube dimensions (square): 16×16 – 80×80 mm Tube dimensions (rectangular): 20×16 – 80×40 mm Square bundles: 250×250 – 500×500 mm Hexagonal bundles (side length): 150 mm – 350 mm Bundle weight: Max. 2T

Tilstand: brukt, Byggeår: 1988, maskin-/kjøretøynummer: 14/804766, Til salgs Brukt Abus enkeltbjelke underhengende traverskran 5000 mm x 2x 500 kg. Gksdpfx Aouviqhebkec Vi kan om ønskelig levere kranene inkludert: * Montering og inspeksjon * Strømskinner * Radiostyring * Master/master styringssystemer Jan Reiling B.V. leverer også nye kraner, helt tilpasset etter mål, til meget konkurransedyktige priser. * Traverskraner * Hengende kraner * Svingkraner * KBK-skinnekraner * Båtheiser Alle våre nye og brukte kraner som vi leverer med montering, leveres med garanti! I tillegg har vi et eget lager med ca. 15.000 Demag reservedeler. For mer informasjon, se nettsiden til Jan Reiling B.V. Kraner, kran, løpekatt, verkstedkran, lagerkran, talje, krane, hallkraner, traverskraner, verkstedkraner, lagerkraner, løfteutstyr, cranes, universal crane, heis. Traverskran, traverskrane, overhead crane. Enkeltbjelke, enkeldrager, single girder. Kjettingtalje, kjettingtaljer, chain hoists.

Tilstand: ny, Byggeår: 2026, Hebrock F 4 For Complete Processing of Your Panels For those who don't settle for half measures. With the F 4, we offer you a model that lets you produce fully processed edges on just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Gkodpfx Abjhqadceksc Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min. Ready for operation: approx. 3.5 min. Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10” touchscreen Overhead quick-heating glue pot (maintenance-free) Support plate for edge material Automatic central lubrication (crosscut saw, corner rounding unit) Optical display for workpiece sequence Extendable front support arm Changeover pot system incl. glue change device for PUR processing Surface scraper with dual sensing Pneumatic roller-end trimming (scissor action design, Hebrock system) Double roller top pressure unit (ball bearing mounted) Transport chain with permanently fixed special chain plates Jointing cutter Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius profile scraper (incl. pneumatic retraction) F4/09/4 multi-radius profile scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex-stock 54634 Bitburg - Available at short notice -

Tilstand: ny, Funksjonalitet: fullt funksjonell, effekt: 6,77 kW (9,20 hk), Byggeår: 2024, SCHORR belted dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled & powerful track drive - Hydraulic self-loading shovel - 500 kg payload - Large, high-quality tipping skip with wide tipping angle - Foldable operator platform included as standard - 6+2 gears The SCHORR tracked dumper RR500DHKAS features a hydraulic tipping drive, a payload capacity of 500 kg, and a powerful 9.2 HP single-cylinder four-stroke petrol engine. The unique feature of the RR500DHKAS is its hydraulically operated shovel. Thanks to the so-called "self-loader," you no longer need a separate loading shovel. With its narrow design (740 mm), this mini dumper can maneuver through tight paths and narrow doorways. The robust tracked drive enables you to easily traverse difficult terrain, gradients, and curbs. The rubber tracks ensure secure footing in all work environments. Lifting and lowering the skip/box is effortless, even when fully loaded, thanks to the hydraulic tipper drive. Another advantage is the extra-large hydraulic oil tank with integrated oil filter. With a rugged skip made of thick steel plate and a straight discharge for quick and easy emptying, this dumper is a must-have for anyone needing to transport heavy loads. Tipping on slight inclines is also no issue. The large tipping angle ensures that even fully loaded skips are completely emptied without manual intervention. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer model: RR500 - Model: DHKAS - Payload: 500 kg - Tipping drive: Hydraulic (stepless) - Drive: Tracks - Weight without/with packaging: 353 / 373 kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) - Starter: Recoil starter - Power: 9.2 HP - Transmission: 6 forward / 2 reverse gears - Speed - Forward: max. 8 km/h - Reverse: max. 5 km/h Dimensions: Godpfx Abetq A Iaekskc - Total length platform folded: 2350 mm - Total length platform extended: 2550 mm - Total width (incl. shovel): 740 mm - Total height: 1050 mm - Container dimensions (internal): 740 x 665 x 435 mm - Container dimensions (external): 1060 x 710 x 520 mm - Track width: 710 mm - Loading volume (liquid): ~ 200 L - Loading volume (heaped): up to 370 L (depending on load) - Track chain dimensions: 180 x 60 x 38 mm - Packaging size: 1890 x 870 x 1220 mm Filling height: - Side: 810 mm - Front: 580 mm PROFESSIONAL DUMPER WITH SHOVEL The mini dumper relieves you from the hard manual labor of moving heavy wheelbarrows. The attached hydraulically controlled shovel further facilitates loading. SMOOTH AND ROBUST The mini dumper features a sturdy 6-speed gearbox with 2 reverse gears. In addition, there are 4 lashing eyes for securing the machine safely during transport. Interested in financing or leasing? No problem! We offer attractive financing options. Contact us for personalized advice on our offers. We look forward to your inquiry! The SCHORR team is at your disposal for any questions regarding our materials handling equipment. Contact our experienced team by phone or email. We look forward to assisting and advising you!

Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2026, styretype: CNC-styring, automatiseringsgrad: halvautomatisk, kontrollerprodusent: PFEIFER technology, lasertype: fiberlaser, laser effekt: 6 000 W, laserens bølgelengde: 1 064 nm, Rørrdiameter (maks.): 160 mm, Rørlengde (maks.): 7 500 mm, bordlengde: 6 500 mm, type innstrømsstrøm: trefaset, type kjøling: vann, trykklufttilkobling: 13 stang, totalvekt: 5 500 kg, total lengde: 14 800 mm, total bredde: 2 900 mm, total høyde: 2 525 mm, garantiperioden: 24 måneder, år for siste overhaling: 2026, arbeidsområde: 7 500 mm, Utstyr: CE-merking, dokumentasjon / manual, kjøleenhet, røykavsug, sentralisert smøresystem, sikkerhetslysbarriere, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15 – 160 mm with Bevel Cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser - Fiber Laser Metal Cutting System for Rapid Material Changeover, with up to 6kW effective power for your production, is the smart and efficient tube laser processing solution. Round tubes, square tubes, rectangular tubes, open profiles, and special profiles can be cut by laser – a laser machine that offers maximum productivity during batch changes. The challenge: Fiber laser with up to 6kW for a wide variety of metalworking tasks! Unmatched Laser Cutting Performance High axis speeds and accelerations, combined with a stable mechanical structure, provide outstanding cutting performance and precision. This tube and profile laser processing machine is designed for production environments, offering a compact footprint and clever solutions – 100% engineered in Saxony! Gkedsyh A Nyjpfx Abksc Tubes and Profiles from 15 x 15 to 160 x 160 mm – 3D Cutting with Efficient Fiber Laser Technology The semi-automatic six-position profile-tube loading chain system enables quick job changes. With the optional bundle loader, you can operate independently. Bevel Cutting A feature that changes everything. With the ability of our machines to tilt the cutting head up to 50° on an additional fifth axis, we have solved one of the greatest challenges in modern profile processing. When the laser beam always hits the tube perpendicularly, it results in an elliptical cut edge. By tilting the tube laser cutting head, a perfectly angled cut can now be achieved together with the feed axis. Of course, working with the skyTUBE Laser gives you peace of mind! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and adherence to the highest industry standards and regulations. Technical Specifications: · Enclosed industrial housing, laser class 1 (optionally class 4) · Working area tube cutting unit/clamping system: uniform tubes from 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Tube working area X 6500, Y ±100, Z 150, A ±360°, U ±50° · Automatic material feed for up to 6 x 160 mm profiles, 3500 – 7000 mm lengths · Automatic profile offcut discharge system designed for profile length · Z-axis drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min and 1.4G, depending on material and laser combination · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (W x D x H): 11600 mm x 2830 mm x 2100 mm + discharge system (depending on profile cutting length). For a standard system with max. 4.5m automatic discharge, the total system length is approx. 14800 mm.

Tilstand: brukt, total lengde: 3 700 mm, total bredde: 1 000 mm, total høyde: 1 700 mm, totalvekt: 800 kg, oscillasjonssleng: 30 mm, slipbåndlengde: 1 500 mm, slipebåndbredde: 150 mm, effekt: 6,5 kW (8,84 hk), omdreiningstall (min.): 1 400 o/min, rotasjonshastighet (maks.): 2 800 o/min, Nr. 04513 Profile sanding machine / Edge processing unit Rehnen KBA Used Profile sanding machine / edge processing unit for sanding edges, milling profiles, and sanding profiles in a throughfeed process. Additionally, the machine features a corner copying milling unit. Suitable for processing solid wood, chipboard, and MDF materials. Material thickness: 10 - 65 mm Material length: min. 50 mm Material width: min. 60 mm Feed speed: 8 m/min Total power: 6.5 kW Equipment: - Oscillating edge sanding device (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding shoe) - Top milling unit - Bottom milling unit Gkedpfx Aoytd Tmobkjc - Corner copying milling unit / corner rounding milling unit - Bottom profile sanding unit - Top profile sanding unit - Feed chain conveyor with top pressure Incl. technical documentation Incl. 6 used profile belts (need to be re-fitted) Transport dimensions approx. 3700 x 1000 x 1700 mm (LxWxH) Weight approx. 800 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale in existing condition Technical data, description of condition, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, no guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Tilstand: brukt, No. 04493 Gksdpfxsxl Ha Ss Abkec Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening height approx. 145 mm Total pressing force 40 tons, specific pressure max. 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Sliding table/cut-off/facing saw for veneer 2.2 kW With pneumatic pressure bar Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Chip extraction for sander and saw 0.55 kW Suction capacity approx. 11 m³/min Pushbutton control with main and emergency stop switches Machine on mobile base Installation footprint as per manufacturer 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale in as-is condition. Technical data, description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sold as viewed. Payment terms: Prices plus statutory VAT; payment prior to collection or dispatch. Delivery terms: ex-stock.