Kjøp brukt materialprøving (479)

Tilstand: svært god (brukt), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approx. 600 liters of usable volume t is suitable for temperature and humidity testing as well as the conditioning of samples and materials within a range from −70°C to +180°C. Simcon/32 - Net Control Technical Data: Chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 800 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70°C up to 180°C Temperature deviation over time (center of usable space): ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: at +20°C: 5000 W at -20°C: 5000 W Climatic Test Data: Temperature range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation over time (center of usable space): ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Temperature gradient 1 to 2 Humidity fluctuation over time (center of usable space): ± 1 to ± 3 % r.h. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Bsdpozimg Hsfx Apmedd Fuse on site: 32 A slow-blow Permissible test material weight Total load on racks: 80 kg Chamber floor: 80 kg, wire shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: “The table shown in the photos is not included in the scope of sale.” Your safety as a buyer is our priority! The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information excepted!) For further questions, we are happy to assist you by phone.

Tilstand: svært god (brukt), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell material testing machine 20 kN tensile & compression testing testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compressive testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials, and is typically used in laboratories, quality assurance, research, and education. Control is via PC with Zwick/Roell testXpert III software (data media & documentation included). Technical data: Rated test force: 20 kN Test direction: tensile & compression Mains connection: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documentation & nameplate): Mechanics / Testing Rated force: 20 kN Test direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & weight: Overall height: approx. 1,545 – 2,114 mm (depending on crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Test area width: 440 mm Weight: approx. 150 kg (base unit); approx. 180 kg with typical equipment Electrical data: Mains connection: 230 V AC Phase: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Protection class, electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Zwick / Roell material testing machine (20 kN) - Electronic unit Bdjdpfozimgtox Apmod - PC workstation (monitor, PC, condition as seen in photos) - 2 measuring modules (Delock units) - Zwick/Roell testXpert III software (data medium) - Original operating and technical documentation - Various connection and interface cables (Changes and errors in technical data and information excepted!) Should you have further questions, we are happy to answer them for you by phone.

Tilstand: svært god (brukt), CTS Type: CSR-60/810/S Temperature & Climate Air-Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations over an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, comprising: - Conditioning unit (CSR-60/810/S) - External test chamber (test box 1200 L) The system is designed to supply external test chambers or boxes with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical Data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Bdjdpfx Ajzimgaspmod Temperature & Climate Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A (slow blow) Connection type: Hardwired Refrigeration System Refrigerants: Precooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection rating: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W×D×H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L Dimensions (W×D×H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Important safety information for buyers: The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, please contact us by telephone.

Tilstand: brukt, Amboss + Langbein Industrielt tørkeskap Amboss + Langbein WTS 20 3B – 80 °C – 400 V – 5 kW Til salgs er et industrielt tørkeskap / varmetørkeskap fra produsenten Amboss + Langbein, type WTS 20 3B. Maskinen er ideell for tørking, oppvarming og temperering av emner, komponenter eller materialer i verksted-, industri- eller laboratoriemiljø. Tørkeskapet har digital temperaturkontroll, sikkerhetstermostat, samt en robust industriutførelse med flere innsatser i rustfritt stål. Takket være hjul er enheten lett flyttbar inne i hallen. Tekniske data: Produsent: Amboss + Langbein Type: WTS 20 3B Produksjonsår: 04/2010 Driftsspenning: 400 V Frekvens: 50 Hz Effekt: 5 kW Maks. temperatur: ca. 80 °C Temperaturkontroll: digital Sikkerhetstermostat: Ja Bdjdezimf Nspfx Apmed CE-merking Mål / Vekt (ca.): Høyde: 170–180 cm Bredde: 80–90 cm Dybde: 70–80 cm Vekt: 180–220 kg Tilstand: brukt Inkludert i leveringen: (se bilde) (Med forbehold om endringer og feil i de tekniske dataene!) Vi svarer gjerne på ytterligere spørsmål på telefon.

Tilstand: brukt, IMV Type: i240 + forsterker SA3AM + vifte Mål Effektforsterker: SA3AM.i40 BxHxD 1234 x 997 x 720 mm Vibrasjonsgenerator: i240 BxHxD 580 x 1950 x 850 mm Tekniske data for anlegget: Armaturmasse: 20 kg Armaturdiameter: 290 mm Armaturresonans: 2300 Hz Tillatt eksentrisk moment: 850 Nm Frekvensområde: 0-2600 Hz. Maksimal kraft: 24 kN (sinus og støy) 48 kN (støt) Maksimal akselerasjon: 1200 m/s² (sinus) 840 m/s² (støy) 2400 m/s² (støt) Maksimal forskyvning: 100 mm p-p. Maksimal bæreevne: 400 kg. Omgivelsesbetingelser: Temperatur 0-40 °C, luftfuktighet 0-85 %RH. Maksimal utgangseffekt: 30 kVA (SA3AM-i40) Bdjdpfxozimf As Apmod + Shaker-armatur 290 mm Brukbar opp til 2000 Hz Vekt: 410 kg (SA3AM-i40) Totalvekt ca. 2800 kg Tilstand: brukt Leveringsomfang: (se bilde) (Endringer og feil i de tekniske dataene forbeholdes!) Ytterligere spørsmål kan besvares gjerne over telefon.

Tilstand: svært god (brukt), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S klimakammer for Li-Ion CO/CO₂ −42 til +150 °C 400 V luftkjølt Til salgs er et temperatur- og klimakammer fra den anerkjente tyske produsenten Vötsch Industrietechnik GmbH, type VC³ 4018/S, produksjonsår 2012. Utstyret er spesielt tilrettelagt for testing av litium-ion-batterier og har integrert CO-overvåkning og CO₂-inertisering for økt driftssikkerhet. Bodpfxjzimfve Apmedd Viktig informasjon: På grunn av denne sikkerhetsfunksjonaliteten er kammeret programvarebegrenset til et temperaturområde fra −42 °C til +150 °C. Kammeret er spesielt godt egnet for: - Li-Ion batteritester - Testing av elektronikk og moduler - Temperatur- og klimabelastningstester - Utviklings- og kvalitetssikringsoppgaver Tekniske data: Testkammer mål: Bredde 580 mm x Dybde 450 mm x Høyde 750 mm Utvendige mål: Bredde 870 mm x Dybde 1550 mm x Høyde 1800 mm Testkammer volum: 190 liter Gjennomføring standard: R1: Ø 125 mm, L1: Ø 50 mm Data for temperaturtesting: Temperaturområde: -42°C til +150°C Tidsmessig temperaturavvik ±0,1 til ±0,5 K Romlig temperaturhomogenitet ±0,5 til ±1,5 K Endringshastighet temperatur: Oppvarming 4 K/min, Kjøling 4 K/min Maks. varmekompensasjon: 2300 W Data for klimaprøving: Temperaturområde: +10 til +95 °C Duggpunktsområde: -3 til +94 °C Fuktighetsområde: 10 til 98 %RF Tidsmessig temperaturavvik: ±0,1 til ±0,3 K Romlig temperaturhomogenitet: ±0,5 til ±1,0 K Tidsmessig fuktighetsavvik: ±1 til ±3 %RF Varmekompenasjon: 400 W Driftsdata: Testkammerbelysning: Halogenpære 2 x 24V, 50W 3/N/PE AC 400V±10 % 50 Hz Nominell effekt: 4,1 kW Nominell strøm: 14 A Kuldemedium: R-404A Vekt: 470 kg For din sikkerhet som kjøper gir vi følgende informasjon: Følgende punkter utføres alltid på våre tilgjengelige testkamre på forhånd: 1. Funksjonstest og utskifting av nødvendige komponenter 2. Om nødvendig, ny fylling med lovlig kuldemedium 3. Tetthetsprøving med sertifikat 4. Etter vellykket kontroll kjøres kammeret gjennom en dokumentert testsyklus. Tilstand: brukt Leveringsomfang: (se bilde) (Endringer og feil i de tekniske dataene forbeholdes!) Ytterligere spørsmål kan besvares over telefon.

Tilstand: svært god (brukt), Espec Type: PL-2KPH ESPEC PL-2 KPH climate chambers, air-cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Depending on temperature range and humidity fluctuations: ± 2.5% RH over time ± 3.0% RH Bjdpfx Aszimfpepmsdd Internal dimensions: Width 500 × Height 750 × Depth 600 mm External dimensions: Width 910 × Height 1590 × Depth 973 mm Microprocessor control with 10 pre-installed international testing standards and 20 freely programmable memory slots, equipped with integrated timer for automatic program start/stop and error code display; programming via touchscreen. Alarm notification (acoustic and optical) Device protection in case of overtemperature Overtemperature protection with 2 switching contacts Test chamber illumination Operating hours counter Test chamber volume: 225 l Weight: 300 kg net Electrical connection: 400 V 3/N 50 Hz, Plug: CEE 16 A Max. power consumption: 11.0 A Refrigerant: R404A Scope of delivery: Espec climatic test chamber For your safety as a buyer, please note the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test including certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Tilstand: brukt, SincoTec Type: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Testing Rig Description: For sale is a servo-hydraulic biaxial testing rig, SincoTec POWER FLOW BIAXIAL. The unit comes from industrial use and was fully operational until it was decommissioned. Service and maintenance were performed professionally. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test rig is suitable for tensile/compression tests, torsion tests, as well as combined load testing on components and assemblies, e.g., for fatigue, lifespan, and functional testing. Main Technical Data – Test Rig: Maximum test force (design): up to ±150 kN Typical operating capacity: 125 kN Maximum torque (torsion): ±4,000 Nm Maximum stroke – linear cylinder: ±75 mm Maximum rotation angle: ±50° Measurement accuracy: Class 1 (DIN EN 10002-3) Test rig dimensions: Overall height: approx. 3,430 mm Width: approx. 1,480 mm Depth: approx. 1,180 mm Max. clamping fixture weight: 250 kg Hydraulic Power Unit (included): Drive power: approx. 152 kW Flow rate: approx. 260 l/min Operating pressure: up to 280 bar Hydraulic oil: HLP ISO VG 46 Tank volume: approx. 1,500 litres Unit dimensions: Length: approx. 2,714 mm Width: approx. 1,820 mm Height: approx. 2,085 mm Electrical Data: Control cabinet / test rig Bdodpfezimcbex Apmed 400 V / 50 Hz Connection: CEE 5-pin Fuse: 16 A Hydraulic power unit 400 V / 50 Hz three-phase Fixed connection Fuse: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test rig - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control equipment - Technical documentation The machine is mechanically rated up to 150 kN; the specification of 125 kN refers to typical operational use. Test rig weight: approx. 4.7 t Important note: "The table shown in the photos is not part of the sale." Condition: used Delivery contents: (see pictures) (Specifications and details are subject to change and errors!) For further questions, we are happy to assist you by phone.

Tilstand: brukt, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Operational Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. This system is ideally suited for both dynamic and static testing of parts and components, such as in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. Test Force: 100 kN (up to ±150 kN) - Max. Torque: ±2000 Nm (up to ±4000 Nm) - Linear Stroke: ±50 mm (max. ±75 mm) - Max. Rotation Angle: ±50° - Servo-hydraulic control - Controlled via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total height of test stand: approx. 3.30 m - Hydraulic power unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm - Fully operational before dismantling Power Supply / Electrical (as per type plates): - Individual units / motors: Bdjdpfxozimb Dj Apmod - 230 V / 50 Hz - Leak oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions for you by phone.

Tilstand: svært god (brukt), Vötsch Type: VT³ 7006 S2-M Vannkjølt Tekniske data: Prøveemnets maksimale vekt: 20 kg Testvolum: 60 liter Testkammerens indre mål: Bredde 380 mm, Dybde 430 mm, Høyde 370 mm Ytre mål: Bredde 875 mm, Dybde 1970 mm, Høyde 1895 mm Vertikal plassering av varm- og kaldkammer (kammerbytte via transportkurv) Temperaturområde varmrom: +50 °C til +220 °C (kalibreringsverdi +125 °C) Temperaturområde kaldrom: -80 °C til +70 °C (kalibreringsverdi -40 °C) Jevn temperaturfordeling i testkammeret (±0,5 K til ±2,0 K) Tidsmessig temperaturavvik: ±0,3 K til ±1,0 K 80 mm rørgjennomføring for måling / forsyning av testobjektet Programvare: SIMCONTROL for betjening og statusvisning Spenning: 3/N/PE AC 400V±10% 50Hz Nominell effekt: 8,5 kW, Nominell strøm: 25 A Kuldemedium: R-404A, R-23 Vekt ca. 800 kg For din sikkerhet som kjøper følgende informasjon: Følgende punkter utføres på våre tilbudte kamre på forhånd: 1. Funksjonstest og utskifting av nødvendige komponenter 2. Om nødvendig, ny fylling med lovlig godkjent kuldemedium 3. Lekkasjetest med sertifikat 4. Etter vellykket inspeksjon gjennomføres en dokumentert testkjøring av kammeret. Bsdpfx Aozima Hepmsdd Tilstand: brukt Leveringsomfang: (se bilde) (Endringer og feil i de tekniske dataene forbeholdes!) Vi svarer gjerne på flere spørsmål over telefon.

Tilstand: svært god (brukt), Thermo Scientific Vötsch Type: UT 6420 For sale is a professional laboratory and industrial drying oven/heat cabinet Thermo Scientific / Vötsch Industrial Engineering – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treatment of materials and components at precisely controlled temperatures up to 300°C. Typical applications include laboratories, industry, workshops, research, and electronics and material testing. Bjdpfxozimate Apmsdd The stainless steel interior ensures even heat distribution and is designed for continuous operation. Interior: Stainless steel with shelving racks External dimensions approx.: 170 × 70 × 80 cm (H × W × D) Technical data: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight approx.: 200–230 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications excepted!) For further questions, we will be happy to assist you by phone.

Tilstand: svært god (brukt), Dr. Hönle Dr. Hönle UV-teknologi – Bluepoint LED High-Power + Bluepoint 2 easycure – Komplettsystem inkl. LED-spots & manualer Til salgs er et komplett UV-herdesystem fra Dr. Hönle, bestående av to styreenheter og flere LED-spots. Ideell for profesjonelle bruksområder innen elektronikkproduksjon, medisinsk teknikk, optikk, plastbearbeiding og laboratoriedrift. Beskrivelse: Systemet består av: - Bluepoint LED High-Power styreenhet (REF 45250.c) - Bluepoint 2 easycure styreenhet (REF 33900.a) - Flere UV-LED-spots (f.eks. 365 nm, luftkjølt) - Adapter BP-LED 4-1 (REF 45970.a) – for styring av opptil 4 spots - Originale brukermanualer + CD Enhetene gir presis kontroll av bestrålingstid, intensitet og energi – perfekt for reproduserbare UV-herdeprosesser i industrien. Tekniske data: Bluepoint LED High-Power (45250.c): - Strømforsyning: 36 V / 5,5 A - Styring av opptil 4 LED-spots - Justerbar UV-intensitet - Tidsprogrammer og energimåling Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA effektforbruk - Høyytelses LED-styring - Industriell kvalitet, laget i Tyskland Mål / vekt totalt: ca. 12–15 kg Viktig merknad: "Bordet som vises på bildene er ikke inkludert i salget." Bdsdpfx Apozimamjmed Tilstand: brukt Leveringsomfang: (se bilde) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED-spots (luftkjølt) - Adapter BP-LED 4-1 - Brukermanualer - CD - Originaldokumenter (Med forbehold om endringer og feil i tekniske data/opplysninger!) Ta gjerne kontakt på telefon dersom du har flere spørsmål.

Tilstand: brukt, Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is designed for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices were used in a laboratory environment, manufactured in 2007–2008, high-quality industrial measurement technology. Scope / Included Components: - CAS 140C-152 Spectrometer (2008) - Ulbricht Sphere ISP250-110 + ISP250-211 (2008) - LEDGON 100 Goniophotometer (2007) - CSD315 3-Axis Controller + Emergency Stop Control Unit (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: * SpecWin Pro * SpecWin Light * Goniometer module * Original license CDs - User manual “LED Test Sockets” - Cables & accessories as shown in the photos Technical Features: - Total luminous flux measurement (lumens) - Spectral analysis (color temperature, CRI, xy, spectrum) - Goniophotometric angle measurement - Analysis of light distribution characteristics - Electrical control and IV-measurements with Keithley 2611 - Fully automated measurement routines with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important Note: "The table shown in the photos is not part of the sale." Bdodpjzimaaofx Apmed Condition: used Scope of delivery: (see pictures) (Specifications and technical data subject to change and error!) Further questions are welcome by phone.

Tilstand: brukt, Zwick trekkmaskin Type: Z20 Styring: BX1-EZ020.A4K-000 Tekniske data: Slag: 200 mm Bsdpezil Upefx Apmjdd Stempelmål (H x B x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Tilbehør: Ekstensometer ClipOn 13,5 mm Ekstensometer MFA 25 (temperaturområde opptil +200°C) Datamaskin + programvare testXpert II V3.5 Klimaanlegg: Airtemp LKG-K-TK-50-040/150 Temperaturområde: -40°C til +150°C Klimaromtemperaturområde: 20°C til +90°C Fuktighetsområde: 10 % til 95 % Prøveromsvolum: 50 liter Temperaturendring: 1 K/min Kuldemedium R404, 5 kg Spenning: 400V 3Ph/n/PE/50 Hz 16 A 9 kW Tilstand: brukt / used Totalvekt: ca. 1500 Leveringsomfang: (Se bilde) (Endringer og feil i de tekniske dataene forbeholdes!) Ta gjerne kontakt per telefon for ytterligere spørsmål. Skriftlig bestilling mulig via e-post eller faks.

Tilstand: brukt, Zwick Type: HA 50 Mål: H 2685 mm x B 1040 mm x D 750 mm Oppstillingsflate: 1600 cm² Tekniske data: Fmax: 50 kN Vmax: 1500 mm/s Maks. arbeidsromhøyde: 1370 mm Arbeidsromsbredde: 565 mm Tilbehør: Kistler kraftsensor 50 kN via NI-Labview Hydraulikkaggregat 280 bar Bdedpfozil Uisx Apmed Oppstillingsflate: 415 cm² Spennverktøy / prøveholder inkludert (Univsersalflens, ekstra sterke bakker for prøveholder) PC + programvare testXpert R V6.0.0 Tilstand: brukt Leveringsomfang: (se bilde) Vekt ca. 1200 kg uten ramme m.m. (Endringer og feil i de tekniske dataene forbeholdes!) Ta gjerne kontakt på telefon for ytterligere spørsmål.

Tilstand: brukt, Zwick Type: Z30 Tekniske data: Totalhøyde: 2114 mm, bredde: 748 mm, dybde: 580 mm Fmax: 30 kN Vmax: 125 mm/s Tilbehør: Ekstensometer ClipOn 13,5 mm Ekstensometer ClipOn 40 mm PC + programvare testXpert II V3.5 Totalvekt: ca. 500 kg Tilstand: brukt Bjdpfx Ajzil Ucopmodd Leveringsomfang: (se bilde) (Endringer og feil i tekniske data og spesifikasjoner forbeholdes!) Vi svarer gjerne på flere spørsmål over telefon.

Tilstand: svært god (brukt), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a test chamber of the type WaterEvent SWT 1000 by Weiss Technik—ideal for standard-compliant testing of IP water protection classes of housings or components. With optional equipment, testing according to IPX9K (high-pressure/steam-jet), ISO 20653, and other standards is possible. High-pressure / steam jet nozzles for IPX9K Jet-nozzles for IPX5/6, including: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Test Methods Depending on the configuration, the SWT system can cover a wide range of test procedures: Base configuration: IPX3 / IPX4 tests (spraying or splash water all around). Optional: Higher protection ratings up to IPX5 / IPX6 (jet water), and—with suitable high-pressure equipment—up to IPX9 or IPX9K. Tests are based on standards such as DIN EN 60529 (for IP ratings) or ISO 20653 (e.g. for automotive or outdoor applications)—depending on requirements. Typical Applications Typical use cases for this test chamber include: - Electronic devices or enclosures that are to be operated outdoors or in humid environments, e.g. outdoor lighting, control enclosures, units, panels. - Components for vehicles or machinery, especially if they are exposed to rain, splash water, or high-pressure cleaning (e.g. construction machinery, e-bike or vehicle parts). - Batteries or electrical components that require water protection testing—e.g. in the automotive or e-mobility industry. Technical Data: Suitable protection ratings: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (SWT 1000)—optional up to 400 mm. Test chamber (interior): Inner dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W x H x D) Operation / Control: Web panel or graphical user interface (GUI) for programming and controlling tests. Bdsdpfxszil T Se Apmod Condition: used Scope of delivery: (see images) (Specifications and technical details subject to change and correction!) For further questions, please feel free to contact us by phone.

Tilstand: svært god (brukt), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is designed to test the ingress of water into enclosures. With the addition of a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel-mounted and replaceable nozzle holders - Adjustable water flow rate with measurement - Programmable test duration control Mechanical load data: Max. load for test specimen (evenly distributed): Permissible specimen weight for test holder (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class testing: Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Bodpfx Apozil T Eemjdd Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photos) (Specifications are subject to change and errors reserved!) For further questions, we would be pleased to assist you by phone.

Tilstand: brukt, RMS Regel- og måleteknikk – Vibrasjonstestanlegg med tilbehør Til salgs er et høykvalitets sett fra RMS Regel- og måleteknikk samt en Rietschle-vifte, ideell for vibrasjonstester, resonansprøving og materialundersøkelser. Inkluderte enheter: Bdodpfxozikdco Apmod RMS REGEL- OG MÅLETEKNIKK – Vibrasjonsgenerator type SW 6011 nr. 2230 30 V – 200 A 13 mm / 1,2 m/sek / 100 g Monteringsramme type SWT 6211/1 nr. 6074 – stabil innfesting for testobjekter Effektforsterker / Power Amplifier type TGE 10‑1/7 – for optimal styring av vibrasjonsgeneratoren Rietschle SKG 410‑2.01 vifte – kraftig vakuum-/trykkblåser Tilstand: brukt Leveringsomfang: (se bilde) (Endringer og feil i tekniske data forbeholdes!) Ta gjerne kontakt på telefon for ytterligere spørsmål.

Tilstand: brukt, Tekniske data (produsent/modelltype – uten garanti): Toppeffekt: "ifølge produsentopplysninger" ca. 10 kN Maks. akselerasjon: "opptil ca. 1 000 m/s²" Maks. hastighet: "typisk ca. 1 m/s til noen m/s" Komponenter: Styreskap TGA 022/3 Vibrasjonsgenerator SW 6507 Effektforsterker TG D 9000-000.00 Blåser Tilstand: brukt Leveringsomfang: Vibrasjons testanlegg som avbildet (Endringer og feil i tekniske data forbeholdes!) Ytterligere spørsmål besvares gjerne på telefon. Bdjdpfxszikc Se Apmed

Tilstand: svært god (brukt), Weiss Technik TS 60 temperatursjokktestkammer / 60 L, –71…+220 °C Vannkjølt Produktbeskrivelse: Til salgs: Weiss Technik TS 60 temperatursjokktestkammer (Thermal Shock Test Chamber). Kammeret er ideelt egnet for raske temperaturvekslingstester (f.eks. iht. IEC, MIL-STD, JEDEC) og har blitt vedlikeholdt godt. Volum & Innvendige mål: Testvolum: 60 liter Innvendige mål kurv / testrom (B × D × H): ca. 380 × 430 × 370 mm Utvendige mål (B × D × H): 895 × 1970 × 1895 mm Temperaturområder & Veksling: Varmekammer: +50 °C til +220 °C Kjølekammer: −72 °C til +70 °C Overføringstid (kurv mellom soner): < 10 sekunder Oppvarmingshastighet: opptil 17 °C/min Kjølehastighet: opptil 3,7 °C/min I enkelmodus (kun kald sone) oppvarmingshastighet: ca. 3,2 °C/min Bdjdpfx Apozii A Rjmsd Temperaturavvik & homogenitet: Tidsavhengig avvik (temperaturkontroll over tid): ± 0,3 til ± 1,0 °C Last / Lastekapasitet & Løftesystem: Maks last kurv/løftesystem: 20 kg Overføringskurv sikret med beskyttelsesgitter på alle sider Ytterligere funksjoner & utstyr: Støynivå: ca. 58 dB(A) under drift Styring: Touchskjerm, RS-232 / USB / Ethernet grensesnitt Elektrisk tilkobling: 3/N/PE AC 400 V ±10% 50 Hz Nominell effekt: ca. 8,5 kW Nominell strøm: ca. 25 A Sikring fra kundens side: 32 A Kuldemedium: R-404A / R-23 Vekt: 800 kg For din trygghet som kjøper: Følgende punkter gjennomføres på våre kamre før salg: 1. Funksjonstest og utskifting av nødvendige komponenter 2. Om nødvendig påfylling av lovregulert kjølemedium 3. Tetthetskontroll med sertifikat 4. Etter vellykket kontroll kjøres det en dokumentert testrunde. Tilstand: brukt / brukt Leveringsomfang: (Se bilde) (Endringer og feil i de tekniske dataene og informasjonen forbeholdes!) Ytterligere spørsmål kan vi gjerne svare på over telefon.

Tilstand: brukt, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer servicing carried out General information: For sale is a used resonance testing system Power Swing 20 kN from the manufacturer Sincotec Test Systems GmbH. The test bench was operated in single-shift operation, and all maintenance was carried out regularly by the manufacturer. Special features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer-serviced - Ideal for research, testing, and development applications Technical data – Test Bench Characteristic / Value Total height (test bench): 1215 mm (without clamping fixture) Width (test bench): 2005 mm Depth (test bench): 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical data – Control Cabinet Characteristic / Value Total height (control cabinet): approx. 1800 mm Tabletop height: 1080 mm Control cabinet width: 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Control cabinet depth: 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight: 152 kg (small tabletop), 187 kg (large tabletop), with (granite plate) 247 kg Site requirements Characteristic / Value Required space: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load-bearing capacity: 234 N/cm² Power supply requirements Characteristic / Value Voltage: 400 V three-phase, neutral conductor, and protective earth Phase sequence: clockwise rotation Voltage fluctuations: ≤ ±10 % Short dips: < 20 ms Limits for persistent interference: Radio interference class A in accordance with VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / grounding resistance: < 0.3 Ω Connection and protection Characteristic / Value Power supply: 400 V / 50 Hz (clockwise phase sequence) Connection plug: CEE socket, 5-pin, 16 A Bodpfszii A Djx Apmodd Fuse: 16 A Test bench weight: approx. 3.6 t Max. clamping device weight: 250 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Tilstand: brukt, SincoTec Type: Exciting Mot POWER SWINGLY 20 kN Resonance Test Stand The POWER SWINGLY BigTable resonance test stand is designed as a two-mass oscillator. It consists of a vibration head, excited by an imbalance motor driven by a frequency-controlled asynchronous motor. The vibration head is located at the top of the machine and generates the dynamic amplitude. The vibration head is supported against the upper crossbar via preloaded compression springs and is centrally guided. The mid-load drive is located in the lower part of the machine and applies the static preload by means of a geared motor via a spindle drive. The specimen chamber is positioned above the clamping table and is limited at the top by the adjustable crossbar. Bdjdpfx Apszii Awemod The test stand is controlled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical Data: General Data Test Stand: - Total height: 1840 to 2240 mm - Height of machine table: 1030 mm - Width: 800 mm - Depth: 1500 mm - Maximum specimen chamber height: 600 mm (without load cell) - Free column passage: 550 mm - Maximum force amplitude: 10,000 N - Maximum total force: ±20,000 N - Maximum oscillation stroke: ±5 mm - Test frequency: 30 to 110 Hz - Sensor accuracy: at least Class 1 (DIN EN 10002-3) - Weight of test stand: approx. 1,880 kg - Max. weight of clamping device: 150 kg General Data Control Cabinet: - Total height: 1900 mm - Height of desktop: 1080 mm - Width: 650 mm - Depth: 700 mm - Weight: 152 kg - Colour: RAI 9006 (White Aluminium), desktop Midnight Site Requirements: - Required space: 2.5 x 2.5 m - Required ceiling height: 2.8 m - Floor load capacity: 170 N/cm² - Power supply: 400 V / 50 Hz (right-hand phase sequence) - Connection plug: CEE socket, 5-pin, 16 A - Fuse: 16 A Connection and Environmental Conditions Network Requirements: - Voltage: 400 V three-phase with neutral conductor and protective earth, right-hand phase sequence - Voltage fluctuation: < ±10% - Short-term dips:

Tilstand: brukt, Liebisch KEA 300 Constanzo Fungerende kondensvann-testapparat for material- og beleggtesting Beskrivelse: Bedpszii Aqjfx Apmsdd Apparatet brukes for utførelse av kondensvanns- eller vanndampstester etter gjeldende standarder (f.eks. DIN EN ISO 6270). Ideell for testing av fukt- og korrosjonsmotstand på belegg, lakk, metaller og plast. Utførelsen er robust, krever lite vedlikehold og egner seg utmerket til forskning, laboratorie- og kvalitetskontrollapplikasjoner. Tekniske data: Fabrikat: LIEBISCH Type: KEA 300 Constanzo Nominell effekt: 1.400 W Kammerstørrelse: ca. 500 × 450 × 500 mm (B × H × D) Spenning: 230 V / 50 Hz Kammermateriale: Rustfritt stål, korrosjonsbestandig Styring: Ingen / manuell betjening Viktig informasjon: “Bordet som vises på bildene, følger ikke med i salget.” Tilstand: brukt Leveringsomfang: (Se bilde) (Endringer og feil i tekniske spesifikasjoner forbeholdes!) Ta gjerne kontakt på telefon dersom det er spørsmål.

Tilstand: svært god (brukt), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used to test for the ingress of water into enclosures. When used in conjunction with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swiveling and replaceable nozzle holders - Adjustable and monitored water flow rate - Programmable test duration Mechanical load data: Bedpozii Akjfx Apmsdd - Maximum test load (evenly distributed): - Permissible specimen weight for test carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) For further questions, we are happy to assist you by phone.