Diverse

WEINIG Rondamat 912

Tilstand: ny, Byggeår: 2025, MASKIN FOR Å PRODUSERE FLIS, merke KÄLIN Hobeltechnik, modell MPC-P: • Omtrentlig produksjon av våt flis: 3.800 kg/time • Vogn for tømmerstokker med dimensjoner: 2.800 mm x 1.100 mm x 1.300 mm • Maksimal tømmerlengde: 2.650 mm • 2 symmetriske og uttakbare tromler à 1.140 mm, hver delt i 3 seksjoner: - Diameter: 200 mm - Lengde: 380 mm - Antall kniver: 8 - Skjerping av komplette tromler, uten demontering av kniver SUPER RASKT BYTTE AV TROMLER, under 15 minutter! Iodpfsvk Saxsx Aa Njtd • 2 ekstra sett tromler for utskiftning under skjerpeprosessen • Motoreffekt tromler: 90 kW / 120 HK • Vognhastighet styrt av ELEKTRONISK INVERTER: 0,6 til 36 m/min • Automatisk kontroll av mate- og lastforhold for maskinen • 1 trekkmotor, drift via dobbel kraftig kjede: 15 kW / 20 HK • Nivåkontrollsystem for material i vognen for å forhindre tomgangskjøring • Elektrisk sentral og betjeningspanel. Kontrollpanel med berøringsskjerm • Motorisert bånd for uttransport av flis: 5.000 mm x 800 mm • Vekt: 11.000 kg • CE-standard

Tilstand: brukt, Nr. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, year of manufacture 2017 Thermal treatment plant / thermal chamber for modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on wood thickness and species. The system features a high-performance energy and heat transfer system and operates with a gas- or oil-fired boiler, using thermal oil as the heat transfer medium. Technical data: Capacity: 5,950 - 9,900 m³ of wood per year (with 330 working days) Usable volume: 9 m³ (at 50 mm wood thickness) Itedpfx Ajv Si Szea Nsd Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm duplex stainless steel EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave where thermal treatment takes place 2. Vacuum system to evacuate the autoclave before heat is introduced 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: stainless steel tubes (seawater-resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heater module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Function description: 1. Loading the autoclave with wood 2. Creating a preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Creating a final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Designed according to EN 13445 Sale on behalf of customer, ex works near 5020 Salzburg (Austria), without disassembly, transport, or installation Disassembly, loading, and transport by us possible on request Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place as is Technical details, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or prior owner, without guarantee Subject to prior sale For used machinery, all warranties are excluded; sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Tilstand: brukt, Nr. 3176 Planing and Moulding Machine WEINIG Hydromat 1000 Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished lamella width 4 - 15 mm Max. number of lamellas: 16 pieces Lamella lengths 400 - 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool diameter 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivellable, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter 112 - 250 mm Itedpfx Aju Agh Sja Njd Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Reduced axial adjustment to 25 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter 45 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profile spindles with high-performance bearings Electronic feed 7.5 kW Axial adjustment of feed rollers next to left spindle, 35 mm Shortened roller spacing on the right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, pendulum shafts extended to 200 mm 2 driven, serrated rollers in outfeed table 2 driven, serrated rollers in machine table Pressure beam before and discharge after upper spindle with mechanical digital display DigiSet (digital dual display) for left and upper spindles Electric height adjustment for the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and assembly Subject to errors in description and price reserve Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. The following applies: "purchased as inspected" Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Tilstand: brukt, Rundemaskin WemaProbst RHM 200 Itodjv Ii Tkspfx Aa Nod

Tilstand: brukt, maskin-/kjøretøynummer: IDC000031, Flisstørketrommel Lengde – 14 m Ijdpfxerl Ra Ho Aa Notd Bredde – 3,6 m Tørkekapasitet – 10 t/t

Tilstand: svært god (brukt), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, automatic straight knife sharpening machine for planer heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Tool length max. 330 mm (table stroke 440 mm) • Any number of cutting edges • Continuously adjustable clearance angle 15°–35° • Grinding spindle speed n=4000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2850 rpm • Feed motor 0.053 kW, n=1300 rpm • Grinding speed 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable number of grinding passes per tool 1–5 • Coolant pump motor 0.065 kW, n=2900 rpm • Coolant / tank capacity approx. 115 liters Itsdpowvql Nofx Aa Nsd • Clamping arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function-tested = AS NEW condition Price: On request Payment: Prior to delivery / loading Inspection: Anytime by appointment Errors and prior sale excepted

Tilstand: brukt, Stenner VH105 dobbel båndsag med to bevegelige sagblokker som gjør det mulig å plassere én av dem bak mateanlegget for å kutte med én sag, eller for å føre virket gjennom sagen uten saging – begge deler uten å måtte fjerne sagbladet. - Produsent: Stenner - Modell: VHET105 - Diameter saghjul: 1050 mm - Sagbladbredde: 130 mm - Mateverdi: 10–80 m/min - Avstand mellom sagene: 5 mm - Maks. avstand mellom sagene: 400 mm. Itsdjtp E Uzjpfx Aa Nsd

Tilstand: brukt, Byggeår: 1995, Brukt maskin Itjdpfx Asw Rhlhsa Ned Årsmodell: 1995 Utstyr og tekniske data: - Dybelinnskytningsenhet for samtidig liming og innskyting av dybler - Dybelmating via vedlikeholdsfrie vibrasjonsmatere - Helautomatisk, vedlikeholdsfri elektronisk styring med valg bryter SKYLLING/LIMING/LIMING-INNSKYTING - Lukket limesystem - 1 rustfri beholder à 5 l for lim og 1 rustfri beholder à 5 l for vann - Lett, hendig og rekylfri pistol for 8 mm dybler - Kapasitet: 45 dybler per minutt - Elektrisk tilkobling: 220 V, 1 fas, 50 Hz - Trykklufttilkobling: 6 bar - Mål: 650 x 650 x 1100 mm - Vekt: 110 kg Tilgjengelighet: kort varsel Lokasjon: Röllbach

Tilstand: svært god (brukt), Byggeår: 2014, Funksjonalitet: fullt funksjonell, SARMAX APACHE 15 impregneringsmaskin med 8 børster I god stand, fullt funksjonell Itedpfjw E Evzsx Aa Ned Motorisert høyde- og breddejustering

Byggeår: 2022, Tilstand: ny, Avstand mellom kassettminimum 450 mm og på slutten 300 mm. Stavlengde 1000-1550 mm. Itedpfxjm Dtiuo Aa Ned