Stick kassett

Agrosilva AS

Tilstand: ny, Beste Preis 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebetisches: 2200 x 375 mm Bdodjdnxydopfx Anrjb Maximale Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsägeachse: 4.500 / 6.000 U/min Durchmesser der Hauptsägewelle: 30 mm Sägeblatt schwenkbar: 0–45° Sägeblatt-Hebung und -Senkung elektrisch gesteuert Hauptmotor: 5,5 kW Vorritzsägeblatt Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7.000–8.000 U/min Vorritzsägewelle: 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung eines 400-mm Sägeblatts muss das kleinere entfernt werden. * Ein reduziertes Sägeblatt darf nur mit einer maximal 350 mm Hauptschutzhaube verwendet werden.

Tilstand: ukontrollert (brukt), Byggeår: 1991, Torwegge flersagsmaskin Kjedebredde: 250 mm Snitthøyde: 100 mm Bdsdpfjucnukjx Anrob Total tilkoblet effekt: 39 kW

Byggeår: 1998, Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Svært stabil rullebaneport med hydraulisk løfte- og senkeepåkryssningsmater. 1. del: Lengde 7 100 mm. Rullelengde 2 000 mm. Rullediameter 220 mm. Byggehøyde 1 000 mm. Innebygd hydraulisk løfte- og senkepåkryssningsmater. Med 4 kjedestrenger. Avstander: 1 500 - 1 300 - 1 000 mm. Fullstendig platet. Hydrauliske modellstøtteruller. Drift via gir motor. Ny lagerføring. 2. del: Lengde 7 200 mm. Rullelengde 1 600 mm. Transporlengde 6 100 mm. Innebygd hydraulisk løfte- og senkeepåkryssningsmater med 6 kjedestrenger. Frittbærende, det er mulig å transportere kappvaren under rullebanen til venstre eller høyre. Bdodpfjt Hg Huex Anrsb Fullstendig platet. Inkludert hydraulikkaggregat for begge rullebanene.

Tilstand: ny, Byggeår: 2025,

Tilstand: brukt, Byggeår: 2000, Funksjonalitet: fullt funksjonell, Holtec sorteringsbloktog type SBZ. Lengde 94,5 m. 52 bokser. Bodow Ug Agjpfx Anredb

Tilstand: god (brukt), Byggeår: 2000, Funksjonalitet: fullt funksjonell, Holtec Bruks tømmerinnmating med rotreduser, bestående av: Tverrmatingsbånd med 6 kjedestrenger, delt drift. Holtec hydraulisk trinnskyver med delt drift. Bruks rotreduser type RR 1200 for langtømmer – freselengde 1200 mm. Holtec tunglast transportbånd for rundtømmer. Bunnskrape-transportør og fordelerskrue. Bsdpfxowxck Aj Anrsdb

Tilstand: ny, Byggeår: 2025, driftstimer: 750 h, Funksjonalitet: fullt funksjonell, inngangsspenning: 400 V, Salmatec - Remetec Pelletfabrikk Bsdpfx Aey D Sr Tonrjdb Komplett pelletanlegg Kjernen i pelletfabrikken er Salmatec Maxima 500, pelletteringsmaskin med kapasitet på 2 tonn/time gjennomstrømning. Anlegget består av: 1) Tørkeseksjon: - Båndtørker - Doseringssjakt og skruekonveyorer med varmt vann opptil 105°C 2) Kverneseksjon: - Rematec hammermølle (tørr) med kapasitet på 3,5 tonn/time gjennomstrømning - Doseringssjakt - Skruekonveyor 3) Pelletteringsseksjon: - SALMATEC Maxima 500 – 2x75 kW motorer, med kapasitet på 2 tonn/time - Tørt sagflissilo 9 m³ - Conditioner med vann-doseringssystem - Skruekonveyorer 4) Lagring av avkjølt pellet: - 2 stk siloer for avkjølt pellet, totalt 12 tonn kapasitet for trepellets - Båndtransportør - Vibrerende sikt 5) Pakkelinje: - VAI vertikal åpen posepakker, kapasitet 5 tonn/time - Båndtransportør - Vibrerende sikt 6) Palletiser: - ABB robotpalletiser med 6 pallstasjoner 7) Elektrisk skap: - Hovedskap med conditioner - Kabler - PLS-system 8) Opsjon i tilbudet: - Biomassekjele med varmtvann opptil 95°C, effekt opptil 1 MW - Sekundært varmekretsløp med platevarmeveksler og PLS-styrt skap Pelletfabrikken er fortsatt i drift – mulighet for inspeksjon og testkjøring på hverdager. Hele pelletanlegget er fullautomatisk; alt utstyr er sammenkoblet og kan betjenes av kun én person. Sluttpris tilbys svært fordelaktig.

Tilstand: god (brukt), Planksorteringsanlegg / Sorteringsanlegg / Lengdesorteringsanlegg Esterer Utkast til høyre 5 sorteringsbokser Total lengde 26 meter 1. boks 2 meter 2. boks 3 meter 3. boks 4 meter 4. boks 5 meter 5. boks >5 meter i god stand – umiddelbart tilgjengelig Plassering: Tyskland, nær Landau an der Isar Ta gjerne også en titt på mine andre annonser. Jeg ser frem til din henvendelse. Bodogw Scqjpfx Anrjdb

Tilstand: brukt, Nr. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, year of manufacture 2017 Thermal treatment plant / thermal chamber for modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on wood thickness and species. The system features a high-performance energy and heat transfer system and operates with a gas- or oil-fired boiler, using thermal oil as the heat transfer medium. Technical data: Capacity: 5,950 - 9,900 m³ of wood per year (with 330 working days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm duplex stainless steel EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave where thermal treatment takes place 2. Vacuum system to evacuate the autoclave before heat is introduced 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: stainless steel tubes (seawater-resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Bdodpfov Si Szsx Anrjb Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heater module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Function description: 1. Loading the autoclave with wood 2. Creating a preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Creating a final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Designed according to EN 13445 Sale on behalf of customer, ex works near 5020 Salzburg (Austria), without disassembly, transport, or installation Disassembly, loading, and transport by us possible on request Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place as is Technical details, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or prior owner, without guarantee Subject to prior sale For used machinery, all warranties are excluded; sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Tilstand: brukt, Nr. 3176 Planing and Moulding Machine WEINIG Hydromat 1000 Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished lamella width 4 - 15 mm Max. number of lamellas: 16 pieces Lamella lengths 400 - 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool diameter 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivellable, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Reduced axial adjustment to 25 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter 45 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profile spindles with high-performance bearings Electronic feed 7.5 kW Axial adjustment of feed rollers next to left spindle, 35 mm Shortened roller spacing on the right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, pendulum shafts extended to 200 mm 2 driven, serrated rollers in outfeed table 2 driven, serrated rollers in machine table Pressure beam before and discharge after upper spindle with mechanical digital display DigiSet (digital dual display) for left and upper spindles Electric height adjustment for the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and assembly Subject to errors in description and price reserve Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. The following applies: "purchased as inspected" Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Bsdpfx Aou Agh Sjnredb Delivery terms: ex location