Slipemaskin

WEINIG Rondamat 909

Tilstand: svært god (brukt), WEINIG Hydromat H23 line, S/N 87321, year of manufacture 1999, Ref. No. 103437 WEINIG HighMech E-1 cross conveyor with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing machine equipped with reinforced KASCHWIG 3-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed 8 – 80 m/min • Feed motor 18.5 kW • 1st bottom spindle 11.0 kW • 2nd right spindle 11.0 kW • 3rd left spindle 11.0 kW • 4th right spindle 11.0 kW • 5th left spindle 11.0 kW • 6th top spindle 15.0 kW • 7th bottom spindle 11.0 kW • 8th top spindle 15.0 kW • 9th bottom spindle 15.0 kW • 10th universal spindle 11.0 kW (4-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/brake combinations • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 powered rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralized lubricating points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing control cabinet • Operating manual, spare parts list, and wiring diagram • Machine supplied without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG parts used: NEW horizontal/vertical spindle NEW counter bearings Iedpfx Amowvqkljijau All spindles with HL-bearings All motors with NEW bearings NEW electronic soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos, technically in excellent condition Infeed mechanization unrefurbished – complete parts – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale reserved.

Tilstand: svært god (brukt), Byggeår: 2021, driftstimer: 9 500 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 3284, Standardversjon av RUF Lignum R2 med utløpskanaler, el.motor 22 kW, brikettstørrelse 150x60 mm, kapasitet opptil 500 kg/t Iajdpfxoyyl Sre Amisu

Tilstand: brukt, Nr. 3176 Planing and Moulding Machine WEINIG Hydromat 1000 Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished lamella width 4 - 15 mm Max. number of lamellas: 16 pieces Lamella lengths 400 - 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool diameter 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left Ijdeu Agh Sepfx Amieau 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivellable, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Reduced axial adjustment to 25 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter 45 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profile spindles with high-performance bearings Electronic feed 7.5 kW Axial adjustment of feed rollers next to left spindle, 35 mm Shortened roller spacing on the right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, pendulum shafts extended to 200 mm 2 driven, serrated rollers in outfeed table 2 driven, serrated rollers in machine table Pressure beam before and discharge after upper spindle with mechanical digital display DigiSet (digital dual display) for left and upper spindles Electric height adjustment for the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and assembly Subject to errors in description and price reserve Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. The following applies: "purchased as inspected" Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Tilstand: brukt, Nr. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, year of manufacture 2017 Thermal treatment plant / thermal chamber for modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on wood thickness and species. The system features a high-performance energy and heat transfer system and operates with a gas- or oil-fired boiler, using thermal oil as the heat transfer medium. Technical data: Capacity: 5,950 - 9,900 m³ of wood per year (with 330 working days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm duplex stainless steel EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave where thermal treatment takes place 2. Vacuum system to evacuate the autoclave before heat is introduced 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: stainless steel tubes (seawater-resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Ijdev Si Szspfx Amisau Display: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heater module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Function description: 1. Loading the autoclave with wood 2. Creating a preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Creating a final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Designed according to EN 13445 Sale on behalf of customer, ex works near 5020 Salzburg (Austria), without disassembly, transport, or installation Disassembly, loading, and transport by us possible on request Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place as is Technical details, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or prior owner, without guarantee Subject to prior sale For used machinery, all warranties are excluded; sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Tilstand: svært god (brukt), Byggeår: 2014, Viesmann Vitoplex 100 LS med Weishaupt WM - G10/4A Iedpfx Amjtrl Skoioau

Tilstand: nesten som ny (brukt), Byggeår: 2024, Brukt dobbeltsidig konsollreol: Varmforsinket skrusystem Leveringsomfang: 4 dobbeltsidige reolstativer, høyde 4 160 mm med fotdel 1 200 mm 24 konsollarmer med 1 200 mm dybde, standard Inkludert langsgående og diagonale stag for 1 300 mm akselavstand Inkludert festemateriell (uten gulvankre) - (Estimert leveringstid ca. 1 uke) - (Ingen skadede deler!) - (Reservedeler kan etterbestilles og utvidelse er alltid mulig) Iasdpfx Ameh Ek Daoisu - (Også tilgjengelig i større kvanta: 20 stativer på lager) Detaljert beskrivelse: - Solid stålkonstruksjon av IPE-profiler - Alle komponenters overflate er varmforsinket - Bæreevne per stenderside: 2 250 kg - Bæreevne per konsollarm: 750 kg - Konsollarmer høydejusterbare i 100 mm-grid - 6 skrubare konsollarmer og 2 fotdeler per stender, dybde 1 200 mm, standard = 4 lagernivåer over hverandre per stenderside - Inkludert langsgående og diagonale stag for 1 300 mm avstand - Reollengde 4 000 mm - Inkludert festemateriell (uten gulvankre) - Med monteringsanvisning og belastningsskilt C4 i henhold til DIN-standard - Fagkyndig telefonrådgivning - Produsert i Tyskland - Kort leveringstid - Henting på stedet mulig Våre konsollreoler produseres utelukkende i Tyskland. Vi tilbyr pålitelige transporter med forhåndsvarsling før levering. Materialet pakkes hensiktsmessig for enkel lossing. Ved utendørs montering reduseres bæreevnen grunnet vind- og snølast. Underlaget må være av betong, være jevnt og egnet for bolting, samt tåle de aktuelle lastene. Kundens ansvar er å kontrollere og sikre undergrunnens beskaffenhet, bæreevne og eventuelle nødvendige myndighetstillatelser. Reolstativene må forankres i gulvet på stedet; forankring i vegg er hverken nødvendig eller anbefalt. I henhold til yrkessikkerhetsbestemmelser anbefales det at reolstativene på øverste lagernivå har minimum 500 mm overheng over stenderoverkant.

Tilstand: brukt, Byggeår: 1996, Vollmer CHC 260 Årsmodell: 1996 Iasdpfx Ajyuc Ifjmiou

Tilstand: ny, Byggeår: 2024, Funksjonalitet: fullt funksjonell, effekt: 5 kW (6,80 hk), klippehøyde (maks.): 200 mm, kuttebredde (maks.): 1 300 mm, sagbladets diameter: 550 mm, skjærelengde (maks.): 3 200 mm, kappbredde ved parallellanlegg: 1 300 mm, lengde på skyvebord: 3 200 mm, Utstillingsmaskin F 45 Elmo Drive - Svingområde + / - 45 ° - Skjærehøyde 200 mm - Forberedelse for forrissaggregat nr. M24038 - Dobbeltrullebord med 3200 mm - Vinkelgjæringsanlegg 3200 mm Digit L - CNC parallellanlegg 1300 mm Iodpfjuh R R Eox Amijau - Duplex gjæringsanlegg 1350 mm manuelt - Malholder - På-/Av-bryter på dobbeltrullebordet - Fremre støttevalser

Tilstand: god (brukt), Byggeår: 2000, Weinig High Mech E6 innmater + A5 utmater + stabler 1. Weinig pakk-innmatnings rullebane. 2. Weinig pakkevippe. 3. Weinig flatkjedet tverrmatnings transportør med enkel bordmater. 4. Weinig avvisningssorterer med rullebaner. 5. Weinig EM814 innmatingsenhet for høvel med flatkjedemater. 6. Weinig utmatingsbånd (3 m) akselerator transportør. 7. Rullebane med tverrmatende kædeutkastere. 8. Weinig tverrmatnings bufferbånd transportør. 9. Weinig flatkjedestabler med sakseløft-rullebane. 10. Weinig pakk-utmatings rullebaner. Iaedpewgbw Refx Amieu Kan leveres med ekstra Weinig produksjonsbuntingssystem ved behov.

Tilstand: brukt, maskin-/kjøretøynummer: IDC000031, Flisstørketrommel Lengde – 14 m Bredde – 3,6 m Tørkekapasitet – 10 t/t Ijdporl Ra Hefx Amijau