Sentrals dreiebenk

Weiler Matador VS2

Tilstand: klar til bruk (brukt), Dreielengde 500 mm Dreiediameter over vange 297 mm Dreiediameter over støtte 160 mm Spindelboring 36,0 mm Opptak DIN 55022 Str. 5 Pinol: 3 MK Pinolvandring 90,0 mm Turtall 30 – 3550 o/min Motorturtall: 1410 / 2830 o/min Total effektbehov 3,3 kW Spenning 380 V Maskinvekt ca. 620 kg Mål L-B-H 1420 x 700 x 1200 mm Hodpsxq Hhyofx Airor Fra yrkesskole – meget god stand (!!) Særlig velegnet for mellomstore presisjonsdreiemner Utstyr: - Robust lede-/trekkspindel dreiebenk - RÖHM trebakke chuck Ø 160 mm - Nedfellbar chuck-beskyttelse - Chucknøkkel - MULTIFIX stålholder A, med 3 nye innsatsstykker - Flyttbar pinol - Svingbar maskinlampe - Betjeningspanel, foran til venstre - Automatisk mating for plan- og toppslide - Maskinfundament med skapdør (lagringsplass) - Sponbeskyttende bakvegg - NØDSTOPP-bryter - Bruksanvisning

Tilstand: brukt, Byggeår: 1973, Svingdiameter over vange 490 mm Svingdiameter over tverrsleide 280 mm Dreielengde 2000 mm Senterhøyde 245 mm Senteravstand 2000 mm Hedjtqqvvepfx Airer Spindelboring 62 mm Samlet effektbehov 7,5 kW Maskinvekt ca. 3,5 t Maskinens dimensjoner L x B x H 3,78 x 1,17 x 1,42 m Tilbehør: 3-bakket chuck 240 mmØ, planskive 400 mmØ, MULTIFIX-verktøyholder, fast lunett, kjølevæskeapparat

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis Heidenhain ND 780 digital readout from training workshop!! Technical data: - Machine No.: 7702, Year of construction: approx. 1990 - Centre height: 140 mm - Distance between centres: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis Heidenhain ND 780 digital readout - Quick-clamping device, internal and external collets (see photo) - 1 pc three-jaw chuck with 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 pc bed stop - Change gears - Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly even at high speeds. The machine was previously used in a training workshop. It comes with extensive accessories. Take the opportunity to view and test the machine under power on site to convince yourself of its excellent condition. Hjdpjy T Hqcefx Airor

Tilstand: svært god (brukt), Byggeår: 1988, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout from Elesta, from a training workshop! Technical data: - Machine No.: 88-8115, Year of manufacture: 1988 - Center height: 140 mm - Distance between centers: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 12 mm - Brake motor - Weight approx. 700 kg Hodpfxjy Tmkvj Airjr - Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout (Elesta) - Quick-clamping system with internal and external collets (see picture) - 1 pc. three-jaw chuck, 1 set of jaws - Multifix size A quick-change tool post with 3 tool holders - Chuck guard - 1 pc. bed stop - Change gears - Travelling steady - Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at higher spindle speeds, the Weiler runs quietly. The original location of the Weiler was in a training workshop. The machine is equipped with extensive accessories. Take the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.

Tilstand: god (brukt), NHH dreiebenk Sving over vange: 260 mm Hsdpsmw Ukcofx Airer Sving over tverrsleide: 160 mm Spindelboring: 26 mm Dreielengde: 600 mm Heidenhain digital målesystem Chuckdiameter: 155 mm Turtall: 2000 o/min Mål: 150x85x155 cm (LxBxH)

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 Lead and Feed Screw Lathe with K&C NEW 3-Axis Digital Readout in Special Light Grey Paint!!! Technical Data: - Machine No.: 92-027, Year of manufacture: 1992 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose, DIN 55022-5, with bayonet locking - Tailstock: Morse taper 3 (MT 3) - Feed rates: 0.012 to 0.9 mm/rev - Thread types possible: Metric, Imperial, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 12 mm - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: Hodoyylq Uepfx Airsr - New K&C 3-axis digital readout, 12 months manufacturer warranty with user manual. Features: Switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switching - 1 x 3-jaw chuck, 1 set of jaws - 1 x 4-jaw chuck, 1 set of jaws - Electronic spindle protection - Multifix size A with 2 tool holders - Motor brake - Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The K&C 3-axis digital readout has been retrofitted. All scales are new and fitted with protective covers to guard against dirt. The slides all move smoothly and evenly. Take the opportunity to inspect this machine powered up on-site and see the condition for yourself.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital display from K&C, NEW, in special light grey paint! Technical Data: - Machine No. 92-029, Year of manufacture: 1992 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: MT 3 - Feeds: 0.012 to 0.9 mm/rev - Threading options: Metric, Inch, Module, and Diametral-Pitch - Metric thread pitches: 0.25 to 12 mm - Weight: approx. 700 kg - Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: - 3-axis digital readout from K&C, new, 12 months manufacturer’s warranty and operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction switch - 1 three-jaw chuck with 1 set of jaws - 1 four-jaw chuck with 2 sets of jaws - Electronic spindle guard - Multifix size A with 2 tool holders - Motor brake - Bed stop About the machine: Hsdpfx Aisyylqhjror Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All linear scales are new and fitted with cover strips to protect against dirt. All slides run smoothly and evenly. Take the opportunity to view and inspect the machine under power on site to convince yourself of its condition.

Tilstand: brukt, Byggeår: 1998, driftstimer: 8 700 h, Funksjonalitet: fullt funksjonell, Den brukte 2-akset CNC-dreibenk DAEWOO Lynx 200B er en robust og rask numerisk styrt dreiebenk med skrått anlagt seng og flate føringer i kompakt format. Maskinen er utstyrt med FANUC 21-T CNC med LCD-skjerm, produksjonsår 1998, og er CE-sertifisert. Hovedegenskaper: - Maks. svingdiameter over vange: 460 mm - Maks. dreiediameter: 280 mm - Maks. dreielengde: 500 mm Hedpfsx Nqliox Airor - Maks. dreiediameter fra stang: 51 mm - Spindelansats: ASA 6” - Spindel: maks. omdreiningstall 4 500 rpm - Spindelmotor effekt: 11 kW - Revolver: 10 stasjoner - Verktøysdimensjoner for dreie-/borverktøy: 25×25 mm / Ø40 mm - Bakdokk: pinoldiameter 65 mm. Pinolslag 80 mm – MK4 - Maskinens vekt: 3 500 kg Utstyret omfatter også bakdokk med automatisk pinolsyklus, verktøypresetter, hydraulisk 3-bakk chuck (som leveres i stedet for den manuelle), samt bruks- og vedlikeholdsmanualer.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout by K&C, NEW in special light grey paint!!! Technical Data: >> Machine no. 92-028, year 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible thread types: metric, imperial, module, and diametral pitch >> Metric thread pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake Hodpfx Ajyyb T Sjiror >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and fitted with protective covers to guard against dirt. All slides run smoothly and evenly. Take the opportunity to view the machine under power on site and see its condition for yourself.

Tilstand: svært god (brukt), Byggeår: 2007, svingelengde: 535 mm, spindelboring: 65 mm, vandring X-akse: 225 mm, bevegelsesavstand Z-akse: 535 mm, spindelmotoreffekt: 26 000 W, total høyde: 1 900 mm, total lengde: 2 900 mm, total bredde: 2 300 mm, totalvekt: 4 380 kg, CNC dreiebenk MAZAK - QTN 200-II MACH-ID: 9481 Produsent: MAZAK Modell: QTN 200-II Styring: Mazatrol Matrix Nexus Årsmodell: 2007 Maksimal dreiediameter: 610 mm X-akse: 225 mm Z-akse: 535 mm Spindelboring: 65 mm Turtall: 5000 o/min Spindeleffekt: 26 kW Verktøyskifter: 12 posisjoner Spontransportør: Ja Verktøyøye: Ja Timer: 5049 t Lengde: 2900 mm Hjdpfx Aeyyxh Teirer Bredde: 2300 mm Høyde: 1900 mm Vekt: 4380 kg Vennligst merk: Informasjonen på denne siden er samlet inn etter beste evne fra oss og, om mulig, fra produsenten. Opplysningene gis i god tro, men nøyaktigheten kan ikke garanteres. Informasjonen utgjør derfor ingen garantier eller kontraktsvilkår. Vi anbefaler at du kontrollerer alle viktige detaljer nøye.