Sentrals dreiebenk

Weiler Matador VS2

Tilstand: brukt, Byggeår: 1987, maskin-/kjøretøynummer: 7826, Denne WEILER dreiebenk Matador VS 2 blir auksjonert bort online som en del av vår industriauksjon / maskinauksjon for lageropprydding Siemens Ruhstorf – måleteknikk, elektroteknikk, kontormøbler, kontorutstyr med mer. Crjdpfjzg S Hyjx Aa Ted Disse og mange flere objekter finner du på vår plattform.

Tilstand: god (brukt), Funksjonalitet: fullt funksjonell, pneumatisk spennhylseinnretning med spennhylser Crsdey N N N Tepfx Aa Tod

Tilstand: klar til bruk (brukt), Dreielengde 500 mm Dreiediameter over vange 297 mm Dreiediameter over støtte 160 mm Spindelboring 36,0 mm Opptak DIN 55022 Str. 5 Pinol: 3 MK Pinolvandring 90,0 mm Turtall 30 – 3550 o/min Motorturtall: 1410 / 2830 o/min Total effektbehov 3,3 kW Spenning 380 V Maskinvekt ca. 620 kg Mål L-B-H 1420 x 700 x 1200 mm Fra yrkesskole – meget god stand (!!) Særlig velegnet for mellomstore presisjonsdreiemner Utstyr: - Robust lede-/trekkspindel dreiebenk - RÖHM trebakke chuck Ø 160 mm - Nedfellbar chuck-beskyttelse - Chucknøkkel - MULTIFIX stålholder A, med 3 nye innsatsstykker - Flyttbar pinol - Svingbar maskinlampe - Betjeningspanel, foran til venstre - Automatisk mating for plan- og toppslide - Maskinfundament med skapdør (lagringsplass) - Sponbeskyttende bakvegg - NØDSTOPP-bryter Crjdpoxq Hhyofx Aa Tod - Bruksanvisning

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis Heidenhain ND 780 digital readout from training workshop!! Technical data: - Machine No.: 7702, Year of construction: approx. 1990 - Centre height: 140 mm - Distance between centres: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis Heidenhain ND 780 digital readout - Quick-clamping device, internal and external collets (see photo) - 1 pc three-jaw chuck with 3 sets of jaws - Multifix size A with 3 tool holders Crjdjy T Hqcspfx Aa Tjd - Spindle guard - 1 pc bed stop - Change gears - Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly even at high speeds. The machine was previously used in a training workshop. It comes with extensive accessories. Take the opportunity to view and test the machine under power on site to convince yourself of its excellent condition.

Tilstand: svært god (brukt), Byggeår: 1988, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout from Elesta, from a training workshop! Technical data: - Machine No.: 88-8115, Year of manufacture: 1988 - Center height: 140 mm - Distance between centers: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm Crjdjy Tmkvspfx Aa Tod - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 12 mm - Brake motor - Weight approx. 700 kg - Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout (Elesta) - Quick-clamping system with internal and external collets (see picture) - 1 pc. three-jaw chuck, 1 set of jaws - Multifix size A quick-change tool post with 3 tool holders - Chuck guard - 1 pc. bed stop - Change gears - Travelling steady - Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at higher spindle speeds, the Weiler runs quietly. The original location of the Weiler was in a training workshop. The machine is equipped with extensive accessories. Take the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital display from K&C, NEW, in special light grey paint! Technical Data: - Machine No. 92-029, Year of manufacture: 1992 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: MT 3 - Feeds: 0.012 to 0.9 mm/rev - Threading options: Metric, Inch, Module, and Diametral-Pitch - Metric thread pitches: 0.25 to 12 mm - Weight: approx. 700 kg - Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: - 3-axis digital readout from K&C, new, 12 months manufacturer’s warranty and operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction switch Csdpfxjyylqhs Aa Terd - 1 three-jaw chuck with 1 set of jaws - 1 four-jaw chuck with 2 sets of jaws - Electronic spindle guard - Multifix size A with 2 tool holders - Motor brake - Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All linear scales are new and fitted with cover strips to protect against dirt. All slides run smoothly and evenly. Take the opportunity to view and inspect the machine under power on site to convince yourself of its condition.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout by K&C, NEW in special light grey paint!!! Technical Data: >> Machine no. 92-028, year 1992 Credpfxeyyb T So Aa Tjd >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible thread types: metric, imperial, module, and diametral pitch >> Metric thread pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and fitted with protective covers to guard against dirt. All slides run smoothly and evenly. Take the opportunity to view the machine under power on site and see its condition for yourself.

Tilstand: brukt, Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS2 dreiebenk, årsmodell 1992, tre-bakket chuck, Multifix, bakre sprutvern, elektrisk chuck-beskyttelse. Maskinen er i god og bruksklar stand, og kan demonstreres under strøm etter avtale. Csdox Sqvgspfx Aa Tsrd