Dreiebenk-konvensjonell-elektronisk

WEILER MATADOR VS 2

Tilstand: brukt, Byggeår: 1987, maskin-/kjøretøynummer: 7826, Denne WEILER dreiebenk Matador VS 2 blir auksjonert bort online som en del av vår industriauksjon / maskinauksjon for lageropprydding Siemens Ruhstorf – måleteknikk, elektroteknikk, kontormøbler, kontorutstyr med mer. Bjdpfx Ajzg S Hyspmsli Disse og mange flere objekter finner du på vår plattform.

Tilstand: brukt, Byggeår: 1990, Universell verktøyfresemaskin Fabrikat: MACMON Modell: M 100 E Årsmodell: 1990 – verkstedtestet Masjinnr.: 1479 Geometrisk inspeksjon med testprotokoll Bodox Ada Rspfx Apmeli Utstyr: - 3-akse digitalt avlesningssystem K+C Arbah-M, nytt - Fast bord 600 x 210 mm (T-spor: 12 mm) - Vertikal fresehode SK 40 med trekkgevind S 20 x 2 - Kjølemiddelutstyr - Bruksanvisning Brukt som sett, uten garanti Maskinen tilsvarer teknisk standard fra produksjonsåret.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis Heidenhain ND 780 digital readout from training workshop!! Technical data: - Machine No.: 7702, Year of construction: approx. 1990 - Centre height: 140 mm - Distance between centres: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis Heidenhain ND 780 digital readout - Quick-clamping device, internal and external collets (see photo) - 1 pc three-jaw chuck with 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 pc bed stop - Change gears Bledpey T Hqcofx Apmji - Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly even at high speeds. The machine was previously used in a training workshop. It comes with extensive accessories. Take the opportunity to view and test the machine under power on site to convince yourself of its excellent condition.

Tilstand: svært god (brukt), Byggeår: 1988, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout from Elesta, from a training workshop! Technical data: Bedpfx Apsy Tmkvsmjli - Machine No.: 88-8115, Year of manufacture: 1988 - Center height: 140 mm - Distance between centers: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock MT 3 - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 12 mm - Brake motor - Weight approx. 700 kg - Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout (Elesta) - Quick-clamping system with internal and external collets (see picture) - 1 pc. three-jaw chuck, 1 set of jaws - Multifix size A quick-change tool post with 3 tool holders - Chuck guard - 1 pc. bed stop - Change gears - Travelling steady - Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at higher spindle speeds, the Weiler runs quietly. The original location of the Weiler was in a training workshop. The machine is equipped with extensive accessories. Take the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.

Tilstand: svært god (brukt), Byggeår: 1978, Funksjonalitet: fullt funksjonell, maskinen har nettopp ankommet og vil bli rengjort snart. Bedpfxeyh Ndwe Apmoli dreiediameter over vange: 400 mm avstand mellom senter: 1000 mm spindelboring: 50 mm chuckstørrelse: 200 mm hastighetsområde: 40–2000 o/min maskinvekt: 1700 kg inkludert 3-bakk chuck og verktøylager

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 Lead and Feed Screw Lathe with K&C NEW 3-Axis Digital Readout in Special Light Grey Paint!!! Technical Data: - Machine No.: 92-027, Year of manufacture: 1992 Bledpjyylq Ujfx Apmoi - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose, DIN 55022-5, with bayonet locking - Tailstock: Morse taper 3 (MT 3) - Feed rates: 0.012 to 0.9 mm/rev - Thread types possible: Metric, Imperial, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 12 mm - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: - New K&C 3-axis digital readout, 12 months manufacturer warranty with user manual. Features: Switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switching - 1 x 3-jaw chuck, 1 set of jaws - 1 x 4-jaw chuck, 1 set of jaws - Electronic spindle protection - Multifix size A with 2 tool holders - Motor brake - Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The K&C 3-axis digital readout has been retrofitted. All scales are new and fitted with protective covers to guard against dirt. The slides all move smoothly and evenly. Take the opportunity to inspect this machine powered up on-site and see the condition for yourself.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital display from K&C, NEW, in special light grey paint! Technical Data: Bsdpfoyylqhex Apmsli - Machine No. 92-029, Year of manufacture: 1992 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: MT 3 - Feeds: 0.012 to 0.9 mm/rev - Threading options: Metric, Inch, Module, and Diametral-Pitch - Metric thread pitches: 0.25 to 12 mm - Weight: approx. 700 kg - Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: - 3-axis digital readout from K&C, new, 12 months manufacturer’s warranty and operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction switch - 1 three-jaw chuck with 1 set of jaws - 1 four-jaw chuck with 2 sets of jaws - Electronic spindle guard - Multifix size A with 2 tool holders - Motor brake - Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All linear scales are new and fitted with cover strips to protect against dirt. All slides run smoothly and evenly. Take the opportunity to view and inspect the machine under power on site to convince yourself of its condition.

Tilstand: verkstedoverhalt (brukt), Byggeår: 1990, Universal verktøyfresemaskin Fabrikat: DECKEL Modell: FP 1 Aktiv Årsmodell: 1990 – verkstedtestet Maskinnr.: 2102-5866 Fresehode type: 2171 Fresehode nr.: 4613 Geometrisk aksept med testprotokoll Tilbehør: - 3-akset aktiv digitalindikator HEIDENHAIN TNC 113 med aktiv funksjon på X-, Y- og Z-akse - Universalbord 590 x 250 mm (T-spor: 12 mm) - Vertikalfresehode SK 40 med trekkskrue S 20 x 2 - Uten kjølemiddelutstyr – kan ettermonteres ved behov Bjdjx S Edlopfx Apmjli - Elektrisk sentralsmøring - Bruksanvisning Brukt, som besiktiget, uten garanti Maskinen tilsvarer teknisk nivå fra produksjonsåret.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout by K&C, NEW in special light grey paint!!! Technical Data: >> Machine no. 92-028, year 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible thread types: metric, imperial, module, and diametral pitch Bsdpfx Ajyyb T Sspmjli >> Metric thread pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and fitted with protective covers to guard against dirt. All slides run smoothly and evenly. Take the opportunity to view the machine under power on site and see its condition for yourself.

Tilstand: brukt, Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS2 dreiebenk, årsmodell 1992, tre-bakket chuck, Multifix, bakre sprutvern, elektrisk chuck-beskyttelse. Maskinen er i god og bruksklar stand, og kan demonstreres under strøm etter avtale. Bjdpfjx Sqvgex Apmeli

Tilstand: ny, Bernardo borslipesmaskin DG 32 Pro Spesifikasjoner Bordiameter: 2 – 32 mm Spissvinkel: 90° - 135° Turtall: 4800 o/min Motoreffekt: 0,25 kW Spenning: 230 V Lengde: 350 mm Bredde: 210 mm Høyde: 305 mm Bledogd H U Uspfx Apmoi Vekt ca.: 32 kg Leveringsomfang • Diamantslipeskive SBC • Spennhylser ER 20, 3 – 12 mm, 10 stk. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • Spennhylser ER 40, 13 – 32 mm, 20 stk. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • Spennhylseholdere ER 20 og ER 40 Egenskaper • Inkludert utstyr for utspissing, noe som gir bedre sentrering av borens spiss på arbeidsstykket og reduserer nødvendig tilmatingskraft • 30 stk. ER-spennhylser medfølger, som også egner seg for mellomstørrelser • Ekstra stasjon for ettersliping av borens skjærekanter (fri vinkel) • Universelt justerbar spissvinkel fra 90° til 135° • Rotor med presisjonskulelager gir svært jevn gange • Raskt og presist arbeidsresultat takket være enkel betjening • Vibrasjonsfri drift takket være høy egenvekt og gummiføtter