Double blow header

National Machinery M34 S1

Tilstand: god (brukt), Byggeår: 1991, Funksjonalitet: fullt funksjonell, Weiler Praktikant 160 B, år 1991, 3-akset digitalt display, spisshøyde 160 mm, Csdpfszg Hvvsx Acwjri sentreavstand 650 mm, spindelhastighet opptil 2.500 o/min, konstokk, spennhylsesett, chuck, 2 holdere,

Tilstand: helrenovert (brukt), Byggeår: 2023, SACMA SP22 PROGRESSIV KALDPRESSE 2 MATRISTER 2 STANSLAGER Fullstendig overhalt – Som ny (i henhold til CE-standarder) Med installert halvboringsenhet PRODUKSJONSOMRÅDE: Diameter: 10x100 mm Maskintype: 2-matrise – 2-blås overføringsmaskin Codpfx Acspgw Ugeweri Diameterområde: 10 mm Antall matriser: 2 Antall stasjoner (inkl. avkapp): 3 Kappelengde: 110 mm Skaftlengde under hode: 100 mm Kapasitet – stk/min: 170

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix quick-change tool post size A with 3 tool holders Codpfx Aevtp Edjcweri >> Stop >> Electric spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly, and it is possible to produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Byggeår: 1986, Tilstand: brukt, Weiler Primus dreiebenk, årsmodell ca. 1986, trebakke chuck, Multifix. Maskinen er i god stand og kan demonstreres under strøm etter avtale. Crodpon Ard Defx Acwji

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990 Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck, NEW, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Collet chuck, new, with collets from 3 to 26 mm in 1 mm increments, new Crodpfx Acjvivmyswoi About the machine: A Weiler Primus lead and feed screw lathe is being offered in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed guides are in very good condition. The Primus was in use at a training center. This newer generation of Weiler lathes is very user-friendly and enables the production of surfaces similar to grinding. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tilstand: brukt, Byggeår: 1999, Dreiediameter over maskinbedet 280 mm Dreiediameter over støtte 150 mm Crodez Abw Hopfx Acwei Dreielengde 500 mm Avstand mellom sentre over maskinbedet 140 mm Avstand mellom sentre 500 mm Bredde på maskinbedet 205 mm Spindelboring 40 mm Hastighetsområde – trinnløs 30–4000 o/min Tre-kjefts chuck, diameter 140 mm Hurtigskiftverktøyholder MULTIFIX, type A Motoreffekt – spindelmotor 4,0 kW Kon i pinolen til bakstøtten MK 3 Pinoldiameter 40 mm Pinolslaglengde 85 mm Driftsspenning 400 V Totalt strømforbruk 7,5 kW Maskinvekt ca. 800 kg Plassbehov ca. 1,40 x 0,95 x 1,55 m !!! Nesten som ny!!! Maskinen kommer fra en yrkesskole! Kun brukt som demonstrasjonsmaskin. - Fabrikknummer: 154 - 3-akset digital skjerm SIEMENS - 3-kjefters planspiralchuck RHÖM - Hurtigskiftverktøyholder i stål MULTIFIX - Medfølgende senterspiss

Tilstand: god (brukt), Byggeår: 1992, LZ-dreiebenk WEILER Type: PRAKTIKANT 160 B, Årsmodell: 1992 med 3-aksers digitalt målesystem Heidenhain, 160 mm RÖHM chuck, Multifix B verktøyholder, pinol med spiss, spenninnretning med spennhylser fra 1 – 29,5 mm, kjølevæskeanlegg. Dreiing over vange: 320 mm Dreiing over tverrsleide: 198 mm Dreielengde: 650 mm Cjdoy Rpr Rspfx Acwori Spindelboring: 40 mm Spindelhastighet: 96 - 2500 o/min Flere data se maskinkort. Føringer i god stand, maskindokumentasjon foreligger.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gearbox steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 160mm three-jaw chuck with 1 set of jaws >> 1 new 125mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders Cedpfxsu Aftgj Acwori >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very operator-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and verify its condition yourself.

Tilstand: brukt, Byggeår: 1972, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: M06L/7593, Tilbudsnummer: M06L/7593 Maskintype: Dobbeltslags-presse Info: Positiv utkast av stempel Fabrikat: PELTZER-EHLERS Type: DKP16 Årsmodell: 1972 Diameterområde: 8-16 mm Skaftlengde under hode: 25-180 mm Maks. kappelengde: 220 mm Kapasitet - stk/min: 70 Csdjwi S Swepfx Acweri Lokasjon: På vårt lager

Tilstand: brukt, Byggeår: 1994, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: M08L/9038, Tilbudsnummer: M08L/9038 Maskintype: 6 matriser – 6 slag presse Info: lukket kniv Crodpfsw N Dmfjx Acwoi Fabrikat: Carlo Salvi Modell: 663/TR Årsmodell: 1994 Diameterområde: 5 mm Antall matriser: 6 Antall trinn: 7 Snitlengde: 35 mm Skaftlengde under hode: 25 mm Kapasitet – stk/min: 400 Presskraft: 15 tonn Plassering: På vårt lager