Dreiebenk

Weiler Primus

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe with 2-axis Heidenhain digital readout from training workshop! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> Heidenhain 2-axis digital readout >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> New collet system with new collets from 3 mm to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides are all very smooth and even. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Gjdpfx Agsu Afqlj Sskd

Tilstand: god (brukt), Byggeår: 1961, Tung dreiebenk, dreiebenk, skrue- og treakslet dreiebenk - Tilstand maskinseng: meget god - Maskinseng: herdet Gkjdpfx Agswfpile Sod - Produsent: Martin, skrue- og treakslet dreiebenk type DLZ 502 - Dreielengde: 2200 mm - Drei Ø over seng: 580 mm - Drei Ø over support: 300 mm - Spindelboring: Ø 65 mm - Spindelhastigheter: 22,4 - 1000 o/min - Kilepinnefeste: Forkardt Ø 320 mm - Bakdokkholder: MK5 - Drift: 7,5 kW - Tilbehør: 4x lunetter, verktøyholder, verktøy se bilder - Mål: 1260/3720/H1260 mm - Vekt: 2510 kg

Tilstand: brukt, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Godpfx Agertd Uwo Sekd Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and facing Chuck flange: short taper DIN 55022, size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changing Power connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg Good condition

Tilstand: klar til bruk (brukt), Byggeår: 1989, Funksjonalitet: fullt funksjonell, Til salgs er en dreiebenk av merket Weiler, modell Primus LZ-GS. Maskinen er i svært god stand. Tekniske data: Produksjonsår: 1989 Maskinnummer: 4443 Driftsspenning: 380 V Gsdpfx Asihig Ieg Sjkd Senterhøyde: 120 mm Spissavstand: 430 mm Turtall: 60 - 3000 o/min i 18 girtrinn Spindelgjennomgang: 23 mm Kortkonisk spindelhode DIN 55027 Bakdokk: MK 2 Mating: 0,03 til 0,15 mm/omdreining Mulige gjengemetriske: metrisk, tomme, modul og diametral pitch Metrisk gjengestigning: 0,25 til 2,5 mm Lengde: 1,2 m, høyde: 1,3 m, dybde: 0,65 m Prisene er eksklusiv merverdiavgift. Besiktigelse mulig etter avtale. Ta kontakt med oss – vårt team hjelper deg gjerne videre. Inbytte eller bytte er mulig! Maskin inn-/utkjøp KJØP / SALG AV PRODUKSJONS- OG METALLBEARBEIDINGSMASKINER M.M. Trenger du en kvalitetsrik, men rimelig metallbearbeidingsmaskin til din produksjon? Eller ønsker du å selge din? For mer informasjon eller kontaktmuligheter, besøk gjerne vår nettside.

Tilstand: brukt, Byggeår: 2006, x-akse 560 mm y-akse 300 mm z-akse 420 mm Digitalt målesystem, 3 akser HEIDENHAIN Bordstørrelse 1100 x 250 mm Spindelhastigheter opm Spindelopptak ISO Matinger 18 - 384 mm/min Fresmotor 3,7 kW Driftsspenning 0 V Total effektbehov 5,5 kW Maskinvekt ca. 1,1 t Plassbehov ca. 1,45 x 1,70 x 1,90 m - Fabrikk-nr.: 676 HEIDENHAIN digitalt målesystem for akser - Hurtiggående funksjon - Sentralsmøring Gedeiclm Aspfx Ag Sekd - Kjølevæskeanlegg - Maskinlampe

Tilstand: god (brukt), Byggeår: 2000, Weiler Primus VC, Årsmodell 2000, Digitalt måleutstyr, Spissavstand 500 mm, Gkodpfxjv Ifxio Ag Sed Maks. dreiediameter over sleide 150 mm, Spindelhastighet opptil 4 000 o/min, Spindelboring 40 mm, Spindeldrift 1,5 kW, Multifix stålholder, 24 langsmatinger, Metriske gjenger, Tommegjenger,

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gearbox steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Gkjdpfx Ageu Aftgs Sod Accessories and Equipment: >> 1 piece 160mm three-jaw chuck with 1 set of jaws >> 1 new 125mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very operator-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and verify its condition yourself.

Byggeår: 1990, Tilstand: brukt, Trykk: 75 t Utladning: 300 mm Gkedpfjd Nl E Uox Ag Sjd Slaglengde: 8 - 110 mm Bordflate: 750 x 600 mm Stempeljustering: 75 mm Stempelflate: 430 x 230 mm Gjennomgangsåpning i bord: 250 x 150 mm Tapphull i stempel: 40 mm Slagantall: 60 + 90 slag/min Maskinvekt ca.: 4,4 t Totalt effektbehov: 4,5 - 6,8 kW Plassbehov ca.: 1,95 x 1,1 x 2,35 m Avstand bord/stempel slag nederst, stempel nederst: 19 mm Avstand bord/stempel slag øverst, stempel øverst: 380 mm Utstyr: - Med hydraulisk clutch-brems-kombinasjon, med nytt hydraulikksystem og oljekjøler - Med tannhjulsdrift i oljebad - Fast bord forberedt for montering av verktøyskonsoller - 2 rullebaner i bordet - Mekanisk overbelastningsbeskyttelse i stempelet (bruddtallerken) Følgende arbeider utføres på maskinen / deloverhaling: - Maskinen demonteres fullstendig, inspiseres, pakninger skiftes og defekte deler byttes ut, osv. - Maskinen lakkeres på nytt - Nytt Balluff kamstyringssystem - Nytt hydraulikkaggregat med oljekjøler for clutchen - Nytt Vogel sentralsmøresystem - Nytt styreskap med touchpanel og ABB sikkerhetsstyring - Oppdatert UVV-inspeksjon med bremselengdemåling

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Gsdpfxovtp Edj Ag Sskd Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix quick-change tool post size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly, and it is possible to produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus GS lead and feed screw lathe in excellent original condition!!! Technical Data: - Year of construction: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock Morse Taper 2 - Feeds from 0.03 to 0.15 mm/rev - Thread cutting: Metric, Inch, Module and Diametral Pitch possible - Metric thread pitches from 0.25 to 2.5 mm - Switchable spindle brake Godpswkh Abjfx Ag Sskd - Weight approx. 360 kg - Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: - New collet chuck system, brand new collets from 3 to 25 mm - 1 piece three-jaw chuck with 2 sets of jaws - Multifix size A with 2 tool holders About the machine: Offered here is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bed ways are in very good condition. Even at high spindle speeds, the Weiler runs very quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Tilstand: ny, Bordlengde 1200 mm Bredde på bord 1200 mm Bordhøyde 900 mm Bordbelastning 3000 kg Maskinvekt ca. 0,32 t Mål L x B x H 1,2 x 1,2 x 0,9 m Sveisebord / hullbord: Hull diameter: 28 mm Bordet er laget av 15 mm tykt, høylegert, plasmanitrodert stål S355J2+N (St 52/3) Plasmanitroderingen gir en hard overflate. høydejusterbar fra ca. 880 - 980 mm Undersiden er ribbet for ekstra forsterkning. inkl. gulvlager Gkjded Iinfepfx Ag Sed Tilbehør er valgfritt!

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus GS Lead and Feed Screw Lathe, 3-Axis Digital Readout Easson ES8 From training workshop – Excellent condition! Technical Data: Gkedpfxjvkfhpe Ag Sjd - Year of manufacture: approx. 1990 Machine No. 3768 - Center height: 120 mm - Distance between centers: 430 mm - Spindle speed: 60 – 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose, DIN 4 - Tailstock: MT2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: - 3-axis digital readout by Easson ES8 - Collet chuck system 1 to 20 mm, collets in 1 mm increments, with mounting and draw tube - 1 pc. 3-jaw chuck with 2 sets of jaws - 1 pc. 4-jaw chuck with 2 sets of jaws - Multifix toolpost Size A with 3 tool holders - Bed stop - Faceplate turning device About the machine: For sale is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. The slides move smoothly and evenly, and the bed guides are in excellent condition. The Weiler runs quietly even at high speeds. The machine comes from the training workshop of a large company. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-quality surface finishes. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990 Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: Gkedpovivmyjfx Ag Sed >> 1 piece 125 mm three-jaw chuck, NEW, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Collet chuck, new, with collets from 3 to 26 mm in 1 mm increments, new About the machine: A Weiler Primus lead and feed screw lathe is being offered in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed guides are in very good condition. The Primus was in use at a training center. This newer generation of Weiler lathes is very user-friendly and enables the production of surfaces similar to grinding. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tilstand: ny, Bernardo lede- og trekkspindeldreiebenk Master 180 inkl. 3-akse digitalt display Senteravstand: 1000 mm Senterhøyde: 180 mm Svingdiameter over vange: 360 mm Svingdiameter over utsparing*: 480 mm Svingdiameter over plansleide: 220 mm Vangebredde: 185 mm Spindelboring: 51 mm Spindelansats: DIN 55029, D1-5 Turtallsområde: (8) 70 – 2000 o/min Langsmating område: (32) 0,052 – 1,392 mm/o Planskrubbmating område: (32) 0,014 – 0,380 mm/o Metrisk gjenge: (26) 0,4 – 7,0 mm Tommegjengetyper: (34) 4 – 56 TPI Pinoldiameter: 42 mm Pinolgang: 110 mm Pinoltilkobling: MK 4 Motoreffekt S1 100%: 1,5 kW (400 V) Motortilkoblingseffekt S6 40%: 2,2 kW (400 V) Maskinmål (B x D x H): 1920 x 750 x 1600 mm Vekt ca.: 540 kg * Utsparingsboltlengde: 225 mm Leveringsomfang: • 3-akse digitalt display i200 med LCD-skjerm • 3-bakkers universalkjoks DK11-200 mm / D5 • Planskive 200 mm / D5, ihht. DIN 55029 • Fast bakdokkslunte – åpning maks. diameter 70 mm • Medløpende lunte – åpning maks. diameter 50 mm • Kjøleanlegg • Førstefylling med Shell Tellus 46 • Uttrekkbar sponbakke • Spenneplate 320 mm • Firkantholder for verktøy • Verneinnretning for firkantholder • Sikkerhetskobling • Mikrometerlengdeanslag • Gjengeklokke • LED-maskinlampe • Reduksjonshylse Gjdpfxed Du Tis Ag Sskd • Byttehjul • 2 senterspisser • Fotpedal med bremsefunksjon iht. CE • Motor med magnetbrems iht. CE • Understell

Tilstand: svært god (brukt), Byggeår: 2003, Funksjonalitet: fullt funksjonell, Weiler Primus VC Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW with VC Drive, Infinitely Variable Speed, and CE Marking – Very Good Condition Technical Data: >> Year of Manufacture: 2003, Machine No. 646 >> Centre Height: 140 mm >> Distance Between Centres: 500 mm >> Spindle Speeds: up to 4,000 rpm, stepless >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.02 to 0.63 mm/rev Gedpfx Agew Idllj Sjkd >> Thread Cutting: Metric, Inch, Module, and Diametral-Pitch threads possible >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle Brake switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Features: >> 3-axis K&C digital readout, NEW >> Collet chuck system with collets from 3 to 26 mm, NEW, 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: Offered is a Weiler Primus VC lead-and-feed screw lathe, manufactured in 2003, in very good original condition. This is an excellent lathe featuring VC drive with infinitely variable spindle speed. The digital readout and scales from K&C are newly installed. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. The K&C digital readout further simplifies and improves precision in operation. You are welcome to view the machine under power on site and convince yourself of its condition.