Førings-/spenningsspindelbenk

Weiler Primus

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe with 2-axis Heidenhain digital readout from training workshop! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> Heidenhain 2-axis digital readout >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> New collet system with new collets from 3 mm to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About the Machine: Gjdpsu Afqlsfx Ag Sebw Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides are all very smooth and even. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Tilstand: brukt, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Gjdortd Uwepfx Ag Sebw Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and facing Chuck flange: short taper DIN 55022, size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changing Power connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg Good condition

Tilstand: klar til bruk (brukt), Byggeår: 1989, Funksjonalitet: fullt funksjonell, Til salgs er en dreiebenk av merket Weiler, modell Primus LZ-GS. Maskinen er i svært god stand. Tekniske data: Produksjonsår: 1989 Maskinnummer: 4443 Driftsspenning: 380 V Senterhøyde: 120 mm Spissavstand: 430 mm Turtall: 60 - 3000 o/min i 18 girtrinn Spindelgjennomgang: 23 mm Kortkonisk spindelhode DIN 55027 Bakdokk: MK 2 Mating: 0,03 til 0,15 mm/omdreining Mulige gjengemetriske: metrisk, tomme, modul og diametral pitch Metrisk gjengestigning: 0,25 til 2,5 mm Lengde: 1,2 m, høyde: 1,3 m, dybde: 0,65 m Prisene er eksklusiv merverdiavgift. Gjdjihig Ispfx Ag Sobw Besiktigelse mulig etter avtale. Ta kontakt med oss – vårt team hjelper deg gjerne videre. Inbytte eller bytte er mulig! Maskin inn-/utkjøp KJØP / SALG AV PRODUKSJONS- OG METALLBEARBEIDINGSMASKINER M.M. Trenger du en kvalitetsrik, men rimelig metallbearbeidingsmaskin til din produksjon? Eller ønsker du å selge din? For mer informasjon eller kontaktmuligheter, besøk gjerne vår nettside.

Tilstand: god (brukt), Byggeår: 2000, Weiler Primus VC, Årsmodell 2000, Digitalt måleutstyr, Spissavstand 500 mm, Maks. dreiediameter over sleide 150 mm, Spindelhastighet opptil 4 000 o/min, Gbsdpfx Ajv Ifxijg Sjw Spindelboring 40 mm, Spindeldrift 1,5 kW, Multifix stålholder, 24 langsmatinger, Metriske gjenger, Tommegjenger,

Tilstand: svært god (brukt), Dreiebenk WEILER type PRIMUS Mellom spissene: 400 mm Maks Ø på benk: 250 mm Maks Ø over slede: 130 mm Spindel Ø: 24 mm Revolverhode: Multifix type A 3-bakket chuck Ø 155 mm Gjengekapasitet: Metrisk + Whitworth Bakdokk: MK2 HEIDENHAIN ND522 målesystem Matefunksjon: automatisk på 2 akser Nytt elektrisk skap Leveres med: 1 stk 4-bakket chuck Ø 155 mm, 4 verktøyholdere, 1 borkjede Spenning: 380 V Mål (L x B x H): 1300 x 900 x 1900 mm Vekt: ca. 500 kg Maskinen er i MEGET GOD STAND Gbedpfjxnp I Dex Ag Sew

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gearbox steps Godpfxsu Aftgo Ag Ssbw >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 160mm three-jaw chuck with 1 set of jaws >> 1 new 125mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very operator-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and verify its condition yourself.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm Gjdjvtp Edjpfx Ag Sjbw >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix quick-change tool post size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly, and it is possible to produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus GS lead and feed screw lathe in excellent original condition!!! Technical Data: - Year of construction: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock Morse Taper 2 - Feeds from 0.03 to 0.15 mm/rev - Thread cutting: Metric, Inch, Module and Diametral Pitch possible - Metric thread pitches from 0.25 to 2.5 mm - Switchable spindle brake - Weight approx. 360 kg - Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: - New collet chuck system, brand new collets from 3 to 25 mm - 1 piece three-jaw chuck with 2 sets of jaws - Multifix size A with 2 tool holders About the machine: Godpfxowkh Abe Ag Sobw Offered here is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bed ways are in very good condition. Even at high spindle speeds, the Weiler runs very quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus GS Lead and Feed Screw Lathe, 3-Axis Digital Readout Easson ES8 From training workshop – Excellent condition! Technical Data: - Year of manufacture: approx. 1990 Machine No. 3768 - Center height: 120 mm - Distance between centers: 430 mm - Spindle speed: 60 – 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose, DIN 4 - Tailstock: MT2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: - 3-axis digital readout by Easson ES8 - Collet chuck system 1 to 20 mm, collets in 1 mm increments, with mounting and draw tube - 1 pc. 3-jaw chuck with 2 sets of jaws - 1 pc. 4-jaw chuck with 2 sets of jaws - Multifix toolpost Size A with 3 tool holders - Bed stop - Faceplate turning device About the machine: Godevkfhpspfx Ag Sobw For sale is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. The slides move smoothly and evenly, and the bed guides are in excellent condition. The Weiler runs quietly even at high speeds. The machine comes from the training workshop of a large company. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-quality surface finishes. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Byggeår: 2003, Funksjonalitet: fullt funksjonell, Weiler Primus VC Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW with VC Drive, Infinitely Variable Speed, and CE Marking – Very Good Condition Technical Data: >> Year of Manufacture: 2003, Machine No. 646 >> Centre Height: 140 mm >> Distance Between Centres: 500 mm >> Spindle Speeds: up to 4,000 rpm, stepless >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral-Pitch threads possible >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle Brake switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Features: >> 3-axis K&C digital readout, NEW >> Collet chuck system with collets from 3 to 26 mm, NEW, 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard Gsdpfx Aew Idlleg Ssbw About the Machine: Offered is a Weiler Primus VC lead-and-feed screw lathe, manufactured in 2003, in very good original condition. This is an excellent lathe featuring VC drive with infinitely variable spindle speed. The digital readout and scales from K&C are newly installed. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. The K&C digital readout further simplifies and improves precision in operation. You are welcome to view the machine under power on site and convince yourself of its condition.