Kjøp brukt Stillas (1 334)
Sorter resultater
- Laveste pris Høyeste pris
- Nyeste annonser Eldste annonser
- Korteste avstand Største avstand
- Nyeste produksjonsår Eldste produksjonsår
- Siste oppdatering Eldste oppdatering
- Produsenter fra A til Å Produsent fra Z til A
- relevans
- Laveste pris
- pris
- Høyeste pris
- pris
- Nyeste annonser
- Innstillingsdato
- Eldste annonser
- Innstillingsdato
- Korteste avstand
- avstand
- Største avstand
- avstand
- Nyeste produksjonsår
- produksjonsår
- Eldste produksjonsår
- produksjonsår
- Siste oppdatering
- oppdatering
- Eldste oppdatering
- oppdatering
- Produsenter fra A til Å
- produsent
- Produsent fra Z til A
- produsent
- Betegnelse fra A til Å
- Betegnelse
- Betegnelse fra Z til A
- Betegnelse
- Modell fra A til Å
- Modell
- Modell fra Z til A
- Modell
- Laveste referanse
- referanse
- Høyeste referanse
- referanse
- Korteste driftstid
- Driftstid
- Lengste driftstid
- Driftstid
- relevans
- relevans
Annonse

1 192 km
Båndkurvetransportør 30° venstre
TransnormGKF 759-750-550 IR900
Ring
Tilstand: brukt, Byggeår: 2001, Transnorm belt curve conveyor, left-hand version GKF 30°-750-550 IR900
RA1404
The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are available as an optional extra upon request.
Belt curves are frequently used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to the low-tension drive across the entire belt width, extended operating times are no problem. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical specifications:
Model designation: Belt curve conveyor TS 1600-105
Conveying length (center radius, NL): 759 mm
Frame width (NB): 750 mm
Belt width (GuB): 550 mm
Construction height (BH): 210 mm
Inner radius (IR): 900 mm
Conveying angle: 30° degrees
Support legs optionally available
Conveying speed (v m/s): 0.03–1.05 m/s
Drive: SEW gear motor SA37 DT80K4/MM05/BW1
Electrical data: 50 Hz V380-500, kW 0.11 / 0.55 / S1
Belt: double-layer, green, smooth, KT36
Year of construction: 2001
Optional extras:
- Support stands
- Side guides
Gjdsk Aa Unspfx Acvjuh
All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, expert advice, simply get in touch with us.
Contact us by phone or email.
We will be pleased to assist you in planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and point of contact for intralogistics
Annonse

1 022 km
Rullebånd
AMI FördertechnikRollen -motorisert
Ring
Tilstand: god (brukt), Byggeår: 2016, rullediameter: 50 mm, total bredde: 6 900 mm, total lengde: 90 000 mm, transportlengde: 900 000 mm, radavstand: 65 mm, Egenskaper:
Tilstand: fullt funksjonell, med bruksspor
Ideell for rask materialtransport
Fagmessig demontert og pakket
Rullebane / transportbane / rullebane – med drift
Årsmodell: 2016
Produsent: AMI Fördertechnik
Modell/type: Flatrem
Tilstand: Brukt
Total lengde: ca. 90 meter
Total bredde inkl. motor: ca. 690 mm
Transportbredde: ca. 610 mm
Rullediameter: ca. 50 mm
Rulleavstand: ca. 65 mm
Akselavstand: ca. 125 mm
Farge: Lysegrå
Rammehøyde: ca. 120 mm
Rammebredde: ca. 35 mm
Driftstype: SEW-motor med flatrem
Lagerbeholdning: ca. 90 meter
Pris per meter
Transportsystemet var i drift frem til demontering.
Takket være den førsteklasses utførelsen på transportsystemet glir materialet ditt mykt og stille til bestemmelsesstedet, selv ved høy belastning.
Gsdpsqgfa Hefx Acveuh
Skreddersydde løsninger for din intralogistikk
Vi er din kompetente partner for rullebaner, båndtransportører, skråtransportører eller teleskoper til lasting og lossing av dine varer! Vi utarbeider gjerne et individuelt tilbud eller gir råd om konsept og monteringsspørsmål. Gi oss ganske enkelt beskjed om dine behov og lokale forhold.
Dra nytte av vår mangeårige erfaring og vårt utmerkede nettverk av fagfolk. Vi har allerede realisert vellykkede prosjekter for selskaper i ulike bransjer, som logistikk, farmasøytisk industri, håndverk eller elektronikkindustrien.
Sammen finner vi løsninger for å optimalisere prosessene og materialflyten din på en kostnadseffektiv og bærekraftig måte. Selv helautomatiske sorteringssystemer eller tilleggskomponenter som plukkereoler eller beholdere kan vi tilby deg.
Annonse

1 054 km
Rotasjonsklipper
SpearheadStubblemaster 730
Ring
Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2024, arbeidsbredde: 73 000 mm, farge: grønn, maskin-/kjøretøynummer: S241645, Utstyr: belysning, hydraulisk folding, SPEARHEAD 730 STUBBLEMASTER SIDEMONTERT SIRKELSLÅMASKIN
Hvis du behøver å bearbeide flere hektar, velg en maskin med en arbeidsbredde på 7,3 meter. 730-modellen har samme spesielle design som 500, komplett med en transmisjon på 165 hk (123 kW).
Større gårdbrukere og entreprenører verdsetter de fem rotorene. Hver rotor har tre rette og tre skrå kniver for den velkjente dobbeltkuttingen til Stubble Master. Dette fremmer raskere nedbrytning og forbedrer jordstrukturen.
Det monocoque utformede dekket hindrer opphopning av rusk, og du kan klippe bare noen centimeter over bakken takket være den justerbare klippehøyden.
Gedjxlf N Sspfx Acvouh
Fem rotorer dekker 7,3 meter i ett drag.
Lett å rengjøre takket være monocoque-designet.
Still klippehøyden nøyaktig for maksimal ytelse.
Annonse

986 km
VS-22110 Elektrisk dupleks gaffeltruck fortsatt RX60-45 gaffelspreder
STILLRX60-45
Ring
Tilstand: god (brukt), Byggeår: 2011, driftstimer: 10 836 h, lastekapasitet: 4 500 kg, løftehøyde: 5 180 mm, drivstofftype: elektrisk, mastetype: dupleks, byggehøyde: 3 400 mm, egenvekt: 6 582 kg, kjørelengde: 10 836 km, Denne DUPLEX elektriske trucken fra STILL er fra 2011 og er i god stand; Trucken har en kapasitet på 4 500 kg; Løfter opptil 5 180 mm; Kjørehøyde 3 400 mm; Utstyrt med sidestillingsfunksjon (SIDESHIFT) og gaffelspreder; Batteriet leveres med ekstern lader og automatisk påfyllingssystem. Avtal tidspunkt for en prøvekjøring. Se videoen på YouTube.
Gusdpfoxc U Hhjx Acveh
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 1810-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 1810-650-500
RA1438
The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor with MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be optionally installed at additional cost. Support legs are not included in the scope of delivery; these are optionally available on request.
The pictures shown of the conveyor system were taken while it was still installed in a logistics center.
Technical specifications:
Conveying length (NL): 1810 mm
Frame width (NB): 650 mm
Gusdjk Abapepfx Acvoh
Belt width (GuB): 500 mm
Overall height (BH): 105 mm
Support legs: available as an option
Conveying speed (v m/s): adjustable up and down via frequency inverter
Drive: SEW geared motor R17 DT71D4/MM03/BW1
Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1
Deflection roller (UR): Ø = 34 mm
Drive drum (AT): Ø = 81 mm
Belt: Type SNB-8E
Year of manufacture: 2001
Options available:
Support legs
Side guides
Prices plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For tailored, professional advice, simply contact us.
Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your Team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact partner for intralogistics
Oppdag flere brukte maskiner
Annonse

1 192 km
Båndtransportør, stigningsbåndtransportør, transportbånd, båndrem
LippertGF 6960-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert belt conveyor incline conveyor GF 6960-650-500
RA1459
The Lippert conveyor belt is from the year 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor with MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be mounted upon request for an additional charge. Support legs are not included in the delivery and are optionally available upon request.
The shown pictures of the conveyor system were taken while still installed in a logistics center.
Technical data:
Conveyor length (NL): 6960 mm (incline conveyor)
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Overall height (BH): 105 mm
Support legs: optionally available
Conveying speed (v m/s): continuously adjustable via frequency inverter
Drive: SEW geared motor S37 DT80N4/MM07/BW1
Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1
Return roller (UR): Ø = 34 mm
Drive drum (AT): Ø = 81 mm
Belt: Type HSL 8 E
Year of manufacture: 2001
Incline/decline: adjustable
Gjdpsk Abbfjfx Acvouh
Optionally available:
Support legs
Single-sided and double-sided side guides
Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, please do not hesitate to contact us.
You can reach us easily by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact for intralogistics
Annonse

1 192 km
Båndtransportør, stigningsbånd, transportbånd
LippertGF 4920-550-400
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor Incline Belt GF 4920-550-400
RA1606
The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. This belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are optionally available on request.
The pictures shown of the conveyor system were taken while the equipment was still installed in a logistics center.
Technical data:
Conveyor length (NL): 4920 mm (feeder + incline belt with curve and upper straight section)
Frame width (NB): 550 mm
Belt width (GuB): 400 mm
Overall height (BH): 105 mm
Support feet: optionally available
Conveying speed (v m/s): variable up and down by frequency inverter
Drive: SEW geared motor SA37 DT80K4/MM05/BW1
Guodpfxek Abd No Acvjh
Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1
Return roller (UR): Ø = 81 mm
Drive drum (AT): Ø = 131 mm
Belt: Type XVT-2128
Year of manufacture: 2001
Incline / decline: adjustable
Optional accessories:
Support feet
Side guide (single-sided or double-sided)
Prices quoted are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For customized, professional advice, please contact us directly. Get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact partner for intralogistics
Annonse

1 192 km
Stigebånd, fallende transportbånd med bue...
TransnormGF 7600-700-600
Ring
Tilstand: brukt, Byggeår: 2014, Transnorm stigningsbånd, fallbånd, stigningsbånd-transportør med bue og forløp GF 7600-700-600
RA2101
Tekniske data:
Transportbåndets lengde (NL): 7600 mm (800 mm forløp + 6000 mm stigningsbånd + 800 mm bue)
Rammebredde (NB): 700 mm, 800 mm med motor
Båndbredde (GuB): 600 mm
Byggehøyde (BH): 80 mm, 430 mm med motor
Vinkel: trinnløst justerbar mellom 0 og 15°
Støtteben: tilgjengelig som tilvalg
Transporthastighet (v m/s): Kan stilles fritt med frekvensomformer
Drift: SEW gir-motor, R27 DT80N4/BMG/TH
Elektriske data: 50Hz V380-500, kW 0,75 S1
Drivtrommel: Ø = 81 mm
Returrull for bånd: Ø = 81 mm
Valgfritt tilgjengelig:
Støtter
Sidestyring, ensidig og tosidig
Tilpasning av lengde (lengre/kortere)
Gujdpfx Acjq Scqfjvoh
Prisene er netto, ekskl. mva. fra sentrallageret til Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individuell, fagkyndig rådgivning er det bare å ta kontakt med oss.
Kontakt oss gjerne på telefon eller e-post.
Vi hjelper deg gjerne med planlegging og gjennomføring av dine prosjekter.
Vi ser frem til å høre fra deg.
Med vennlig hilsen
Ditt team hos Dr. Sonntag GmbH & Co. KG
Din spesialist og kontaktperson for intralogistikk
Annonse

1 192 km
Lippert beltegående transportør Klappband GF sporveksel...
Lippert1045-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 1045-650-500
RA1366
The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor with MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request at an additional cost. Support stands are not included in the scope of delivery but are optionally available upon request.
The images shown were taken while the conveyor was still installed in a logistics center.
The conveyor was previously used as a hinged belt. The folding mechanism was removed during dismantling. Upon request, we can supply this conveyor as a hinged belt version as well.
Technical data:
Conveyor length (NL): 1045 mm
Frame width (NB): 650 mm
Guedpfx Acok Aa Txeveh
Belt width (GuB): 500 mm
Construction height (BH): 105 mm
Support feet: optionally available
Conveying speed (v m/s): continuously adjustable with frequency inverter
Drive: SEW geared motor R17 DT71D4/MM03/BW1
Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1
Return roller (UR): Ø = 34 mm
Drive drum (AT): Ø = 64 mm
Belt: Type SNB 5 E
Year of manufacture: 2001
Optionally available:
- Support stands
- One-sided or double-sided side guides
Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For individual and professional consultation, please feel free to contact us.
Simply call us or send us an email.
We are happy to assist you with planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact partner for intralogistics
Annonse

1 192 km
Båndtransportør, stigningsbånd, transportbånd
LippertGF 1995-550-400
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor Inclined Conveyor GF 1995-550-400
RA1656
The Lippert conveyor belt is from the year 2001 and in good used condition. The belt conveyor is equipped with an SEW-brand motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or photoelectric sensors can be installed upon request for an additional charge. Support stands are not included in the delivery but are optionally available upon request.
The displayed images of the conveyor system were taken while it was still installed in a logistics center.
Technical Specifications:
- Conveyor length (NL): 1995 mm (indexing belt 560 mm + inclined belt 1435 mm)
- Frame width (NB): 550 mm
- Belt width (GuB): 400 mm
- Construction height (BH): 105 mm
- Support feet: optionally available
- Conveyor speed (v m/s): adjustable upwards and downwards with frequency inverter
- Drive: SEW geared motor DT80K4/BMG/MM05
- Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1
- Return roller (UR): Ø = 81 mm
- Drive drum (AT): Ø = 131 mm
- Belt: Type HSL-8E
- Year of manufacture: 2001
- Incline / Decline: adjustable
Optional accessories:
- Support stands
- Single- and double-sided side guides
Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For individual, expert advice, please contact us directly. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Guedpok Abd Tjfx Acvjh
Your specialist and contact for intralogistics
Annonse

1 192 km
Båndkurvetransportør høyre
TransnormGKF 30°-750-550 IR900
Ring
Tilstand: brukt, Byggeår: 2001, Transnorm belt curve conveyor right-hand GKF 30°-750-550 IR900
RA1402
Gujdpek Aa Uksfx Acvjh
The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW gear motor. Supports are not included in the scope of delivery but are available optionally on request.
Belt curves are frequently used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Tapered drums and a specially developed belt guiding system ensure the highest possible running smoothness.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical data:
Model: Belt Curve Conveyor TS 1600-105
Conveying length (central radius, NL): 759 mm
Frame width (NB): 750 mm
Belt width (GuB): 550 mm
Overall height (BH): 210 mm
Inner radius (IR): 900 mm
Conveying angle: 30° degrees
Support legs optionally available
Conveying speed (v m/s): 0.03-1.05 m/s
Drive: SEW gear motor SA37 DT80K4/MM05/BW1
Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1
Belt: double-layer, green, smooth, type KT36
Year of manufacture: 2001
Special features / accessories: Side guides on both sides included
Optionally available:
- Supports
- Side guides, single-sided or double-sided
Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For individual, expert consultation, please feel free to contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you.
Kind regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and partner for intralogistics.
Annonse

1 192 km
Båndkurve transportør 20° til venstre
TransnormGKF 640-750-550 IR1300
Ring
Tilstand: brukt, Byggeår: 2001, Transnorm Belt Curve Conveyor Left GKF 20°-750-550 IR1300
RA1479
The Transnorm belt curve is in good used condition and fully functional. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are optionally available upon request.
Belt curves are commonly used in intralogistics for in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are renowned for performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered drums and a specially developed belt guidance system ensure maximum smoothness of operation.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical Specifications:
Model: TS 1600-105 Belt Curve Conveyor
Conveying length at center radius (NL): 640 mm
Frame width (NB): 750 mm
Belt width (GuB): 550 mm
Overall height (BH): 210 mm
Inner radius (IR): 1300 mm
Guedpfxjk Abcgs Acvsh
Conveying angle: 20°
Support legs and side guides available optionally on both sides
Conveying speed (v m/s): 0.03–1.05 m/s
Drive: SEW geared motor SA37/1 DT71D4/MM3/BW1
Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1
Belt: double-layer, green, smooth, KT36 (see pictures for wear)
Year built: 2001
Optionally available:
Supports
Single-sided and double-sided side guides
Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, please contact us directly. Reach out by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you.
Best regards,
Your team from Dr. Sonntag GmbH & Co. KG
Your specialist and point of contact for intralogistics.
Annonse

1 192 km
Båndkurvetransportør høyre
TransnormGKF 30°-750-550 IR900
Ring
Tilstand: brukt, Byggeår: 2001, Transnorm belt curve conveyor right-hand GKF 30°-750-550 IR900
RA1402
The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW gear motor. Supports are not included in the scope of delivery but are available optionally on request.
Belt curves are frequently used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Tapered drums and a specially developed belt guiding system ensure the highest possible running smoothness.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical data:
Model: Belt Curve Conveyor TS 1600-105
Gjdpfx Aok Abuiocvjuh
Conveying length (central radius, NL): 759 mm
Frame width (NB): 750 mm
Belt width (GuB): 550 mm
Overall height (BH): 210 mm
Inner radius (IR): 900 mm
Conveying angle: 30° degrees
Support legs optionally available
Conveying speed (v m/s): 0.03-1.05 m/s
Drive: SEW gear motor SA37 DT80K4/MM05/BW1
Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1
Belt: double-layer, green, smooth, type KT36
Year of manufacture: 2001
Special features / accessories: Side guides on both sides included
Optionally available:
- Supports
- Side guides, single-sided or double-sided
Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For individual, expert consultation, please feel free to contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you.
Kind regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and partner for intralogistics.
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 22250-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 22000-650-500
RA1361
The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW motor and MOVIMOT inverter for speed control. Side guides and/or light barriers can be fitted on request at an additional cost. Supports are not included in the scope of delivery but can be supplied optionally on request.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical Data:
Length (NL): 22,000 mm
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Total height (BH): 105 mm
Support feet: optionally available
Conveyor speed (v m/s): infinitely adjustable up and down via frequency inverter
Drive: SEW Gear Motor S37 DT 80 N4 MM07
Electrical Data: 50Hz V380-500, kW 0.15 / 0.75 / S1
Drive drum (AT): Ø = 81 mm
Belt return roller: Ø = 50 mm
Belt: Type NNT 10 ENBU
Year of construction: 2001
Optional accessories:
Supports
Side guides, single-sided and double-sided
Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, expert advice, please feel free to contact us directly.
You can reach us easily by phone or email.
Godpek Aa S Nofx Acvouh
We are happy to assist with planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your Dr. Sonntag GmbH & Co. KG team
Your specialist and contact partner for intralogistics
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 1710-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 1710-650-500
RA1370
The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor features a SEW brand motor with MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed on request for an additional charge. Support legs are not included in the scope of delivery but are optionally available upon request.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical data:
Conveyor length (NL): 1710 mm
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Construction height (BH): 105 mm
Support feet: optionally available
Conveying speed (v m/s): adjustable up and down via frequency inverter
Drive: SEW gear motor R17 DT71D4/MM03/BW1
Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1
Return roller: Ø = 34 mm
Drive drum: Ø = 81 mm
Belt type: SNB 8 E
Year of manufacture: 2001
Optionally available:
Gsdpfx Aok Aa Tbscvouh
Support legs
Side guides (single-sided and double-sided)
Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For personalised, expert advice, simply get in touch with us.
Contact us by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
your specialist and partner for intralogistics
Annonse

1 192 km
Båndtransportør GF 780-650-500
Lippert
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 780-650-500
RA1397
The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. Side guides and/or light barriers can be installed at an additional cost upon request. Support legs are not included in the delivery scope but are optionally available upon request.
The images shown of the conveyor system were taken while the unit was still installed in a logistics center.
Technical data:
Conveyor length (NL): 780 mm
Guedek Aa Ucepfx Acvoh
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Construction height (BH): 105 mm
Support feet: optionally available
Conveying speed (v m/s): infinitely adjustable with frequency converter
Drive: SEW geared motor R17 DT71D4/MM03/BW1
Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1
Drive drum (AT): Ø = 64 mm
Return roller (UR): Ø = 34 mm
Belt: type SNB 5 E
Year of manufacture: 2001
Optionally available:
Support legs
Side guides
Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, simply contact us.
Feel free to reach out by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact partner for intralogistics
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 22250-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 22250-650-500
RA1426
The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor and MOVIMOT frequency inverter for speed regulation. Side guides and/or light barriers can be installed on request for an additional charge. Support stands are not included in the scope of delivery; these are optionally available on request.
The images shown of the conveyor system were taken while the unit was still installed in a logistics center.
Technical Data:
Conveying length (NL): 22,250 mm
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Installation height (BH): 105 mm
Support legs: optionally available
Conveying speed (v m/s): infinitely adjustable up or down via frequency inverter
Drive: SEW geared motor S37 DT80N4/MM07/BW1
Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1
Return roller (UR): Ø = 64 mm
Drive drum (AT): Ø = 81 mm
Belt: type NNT-10 ENBU
Year of construction: 2001
Optional accessories:
Support stands
Single-sided and double-sided side guides
Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, simply contact us.
Feel free to reach out by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you soon.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact partner for intralogistics
Godpfsk Abadox Acvouh
Annonse

1 192 km
Lippert båndtransportør med klappbånd og avgreningsskifte GF...
LippertGF 1360-750-600
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor Folding Band GF 1360-750-600
RA1829
The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor featuring a MOVIMOT frequency inverter for speed regulation. Side guides and/or light barriers can be installed upon request for an additional charge. Supports are not included in the scope of delivery but are available as an option upon request.
The images shown of the conveyor system were taken while it was still installed in a logistics center.
Technical Data:
Conveyor length (NL): 1360 mm
Frame width (NB): 750 mm
Belt width (GuB): 600 mm
Construction height (BH): 105 mm
Belt height: 550 mm
Base dimensions: 1270x1180 mm
Total height: 1300 mm
Tipping height difference: 300 mm
Conveying speed (v m/s): 0.05–1.5 m/s
Drive unit: SEW geared motor S37 DT71D4/MM03/BW1
Electrical data:
Belt conveyor motor: 50 Hz V380–500, kW 0.075 / 0.37 / S1
Tipping motor: 50Hz V220/400, kW 0.55 / S1
Return roller (UR): Ø = 42 mm
Drive drum (AT): Ø = 64 mm
Belt: Type XVT-2128
Year of manufacture: 2001
Optional accessories:
Supports
Single or double-sided side guides
Net prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
Gsdpfx Ajk Abgvocvsuh
For personalized, expert advice, please do not hesitate to contact us directly.
You can reach us by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and point of contact for intralogistics
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 1090-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 1090-650-500
RA1393
The Lippert conveyor belt is from the year 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support stands are not included in the scope of delivery but are optionally available upon request.
The images shown of the conveyor system were taken while still installed in a logistics center.
Technical data:
Conveyor length (NL): 1090 mm
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Overall height (BH): 105 mm
Support stands: optionally available
Conveying speed (v m/s): adjustable up and down with frequency inverter
Drive: SEW gear motor S37 DT71D4/MM03/BW1
Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1
Return roller (UR): Ø = 34 mm
Drive drum (AT): Ø = 64 mm
Belt: Type SNB 5 E
Year of manufacture: 2001
Optionally available:
Support stands
Guedok Aa Tujpfx Acveh
Single- or double-sided side guides
Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For expert, tailored advice, simply get in touch with us.
Feel free to contact us by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and partner for intralogistics
Annonse

1 192 km
Båndtransportør, stigebåndtransportør, transportbånd, båndrem
LippertGF 6640-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert belt conveyor incline unit with curve and straight section GF 6640-650-500
RA1420
The Lippert conveyor belt is from the year 2001 and in good (used) condition. The belt conveyor is equipped with a SEW brand motor with MOVIMOT frequency inverter for variable speed control. Side guides and/or light barriers can be installed on request for an additional charge. Support legs are not included in the scope of delivery; they are optionally available upon request.
The shown pictures of the conveyor system were taken while still installed in a logistics center.
Technical data:
Conveyor length (NL): 6640 mm (incline section 5390mm + curve 500mm + upper straight 750mm)
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Frame height (BH): 105 mm
Support legs: optionally available
Conveying speed (v m/s): adjustable up and down via frequency inverter
Drive: SEW geared motor S37 DT71D4/MM03/BW1
Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1
Return roller (UR): Ø = 34 mm
Drive drum (AT): Ø = 81 mm
Belt: Type HSL 8 E
Year built: 2001
Incline/decline: adjustable
Optionally available:
Support legs
Side guides
Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, simply get in touch with us.
Contact us by phone or email.
We are happy to assist you in planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Godjk Aa U Iepfx Acvjuh
Your specialist and contact for intralogistics
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 970-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor Flap Band GF 970-650-500
RA1465
The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor with MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be fitted on request for an additional charge. Supports are not included in the scope of delivery, but are available as an option upon request.
The images shown of the conveyor system were taken while it was still installed in a logistics centre.
Technical data:
Conveyor length (NL): 970 mm
Gusdok Abbxepfx Acvjh
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Installation height (BH): 105 mm
Support legs: optionally available
Conveying speed (v m/s): adjustable upwards and downwards with frequency inverter
Drive: SEW geared motor S37 DT80N4/MM07/BW1
Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1
Return roller (UR): Ø = 64 mm
Drive drum (AT): Ø = 81 mm
Belt: Type SNB-8E
Year of manufacture: 2001
Special features / accessories: Flap band version available on request
Optionally available:
Supports
Single-sided and double-sided side guide
Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, please do not hesitate to contact us.
Simply contact us by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact for intralogistics
Tillitsmerke
Autoriserte forhandlere sertifisert av Machineseeker

Annonse

1 192 km
Båndkurvtransportør 45° høyre
TransnormGKF 680-750-550 IR700
Ring
Tilstand: brukt, Byggeår: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700
RA1451
The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a gear motor from SEW. Supports are not included in the scope of delivery but are optionally available on request.
Belt curves are commonly used in intralogistics for in-plant transport of unit goods and are essential components in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially designed belt guiding system ensure maximum running smoothness.
The pictures shown of the conveyor system were taken while it was still installed in a logistics center.
Technical data:
Model: Belt Curve Conveyor TS 1600-105
Conveying length, center radius (NL): 680 mm
Frame width (NB): 750 mm
Belt width (GuB): 550 mm
Overall height (BH): 210 mm
Inner radius (IR): 600 mm
Conveying angle: 45°
Support feet: optionally available
Conveying speed (v m/s): 0.03-1.05 m/s
Drive: SEW geared motor SA37 DT80K4/MM05/BW1
Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1
Belt: double-layer, green, smooth, KT36 (wear as per photos)
Year of manufacture: 2001
Optional features:
Supports
Side guides (single or double-sided)
Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For personalized, professional advice, simply contact us.
Feel free to call or email.
We are happy to assist you with planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and partner for intralogistics.
Gedok Aba Tspfx Acveuh
Annonse

1 192 km
Båndkurvetransportør 45° venstre
TransnormGKF 45°-750-550 IR700
Ring
Tilstand: brukt, Byggeår: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700
RA1390
The Transnorm belt curve conveyor is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are available as options upon request.
Belt curve conveyors are frequently used in intralogistics for the in-house transport of unit loads and are indispensable in modern distribution centers.
Transnorm belt curves stand out for their performance and reliability. Thanks to low-tension drive across the entire belt width, long operating times are not an issue. Tapered rollers and a specially designed belt guide system ensure maximum smooth running.
The shown images of the conveyor system were taken while still installed in a logistics center.
Technical Details:
Model: Belt Curve Conveyor TS 1600-105
Conveying length at center radius (NL): 766 mm
Frame width (NB): 750 mm
Gsdpfxok Aa T Ho Acveuh
Belt width (GuB): 550 mm
Construction height (BH): 210 mm
Inside radius (IR): 700 mm
Conveying angle: 45° degrees
Support legs: optionally available
Conveying speed (V m/s): 0.03-1.05 m/s
Drive: SEW geared motor SA37 DT80K4/MM05/BW1
Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1
Belt: double-ply, green, smooth
Year of manufacture: 2001
Optionally available:
Supports
Side guide on one or both sides
Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg.
For individual and professional advice, please contact us directly.
Reach out to us by phone or email.
We are happy to support you in planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact for intralogistics.
Annonse

1 192 km
Lippert båndtransportør med klappbånd og avgreningsskifte GF...
Lippert
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 1090-650-500
RA1399
The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW-brand motor featuring a MOVIMOT frequency inverter for variable speed control. Side guides and/or light barriers can be fitted upon request at an additional charge. Supports are not included in the scope of delivery but are available as an optional extra upon request.
The images shown of the conveyor system were taken while still installed in a logistics center.
The conveyor belt was previously used as a hinged belt. The folding mechanism was removed during dismantling. Upon request, we can also supply this belt as a hinged-belt version.
Technical data:
Conveyor length (NL): 1090 mm
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Construction height (BH): 105 mm
Support feet: optionally available
Conveying speed (v m/s): adjustable up and down via frequency inverter
Drive: SEW geared motor R17 DT71D4/MM03/BW1
Electrical data: 50 Hz, V380-500, kW 0.075 / 0.37 / S1
Gedpfxek Aa Ugo Acvsuh
Return pulley (UR): Ø = 34 mm
Drive drum (AT): Ø = 64 mm
Belt: Type HSL-8E
Year of construction: 2001
Special feature / accessories: Hinged belt version available on request
Optional extras available:
Supports
Single-sided and double-sided side guides
Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, expert advice, please do not hesitate to contact us.
You can reach us by phone or email.
We are pleased to assist you in planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and partner for intralogistics
Annonse

1 192 km
Båndtransportør Båndtransportør
LippertGF 790-650-500
Ring
Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor GF 780-650-500
RA1450
The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor and MOVIMOT frequency inverter for variable speed control. Side guides and/or photoelectric sensors can be installed on request at an additional cost. Support legs are not included in the scope of delivery but are available as an option upon request.
The images shown of the conveyor system were taken while the unit was still installed in a logistics centre.
Technical data:
Conveying length (NL): 780 mm
Frame width (NB): 650 mm
Belt width (GuB): 500 mm
Overall height (BH): 105 mm
Gjdpfsk Aa Tmsx Acvjuh
Support feet: optionally available
Conveying speed (v m/s): infinitely adjustable using frequency converter
Drive: SEW geared motor S37 DT71D4/MM03/BW1
Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1
Return pulley (UR): Ø = 34 mm
Drive drum (AT): Ø = 64 mm
Belt: Type SNB 5 E
Year of manufacture: 2001
Optionally available:
- Support legs
- Side guides
All prices net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For tailor-made, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and partner for intralogistics
Vi gjør det enklere for deg å søke: "stillas"
Du får nye tilbud på e-post umiddelbart og gratis.
Du kan når som helst enkelt avslutte søkeoppdraget.