Kjøp brukt Cefla (By Sorbini) Rullefrakke (1 422)

Tilstand: svært god (brukt), CTS Climate Chamber / Climatic Test Cell We offer a CTS climate chamber / climatic test cell. Available from mid-January 2023! Water-cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test chamber approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Psdpfezd R A Usx Afajgr Average temperature change rate without heat radiation (measured in supply air): Heating: 2 K/min Cooling: 1 K/min (from +110°C to -35°C) Climatic testing: Temperature range: +10°C to +90°C Humidity range: +30% to +95% r.h. In dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1 – ±3% r.h. over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 kW Rated current: 92.3 A Compressor: S6J-16.2 + Chiller Refrigerant: R404A Weight: 5,500 kg Type: CW-40/16 Condition: used Scope of delivery: (see image) (Specifications and data subject to change/errors!) For further questions we are happy to assist you by phone.

Tilstand: svært god (brukt), Feutron Type: 3702/06 Water-cooled Climate Test Chamber Technical Data: Nominal Test Chamber Volume: 2.0 m³ Dimensions: External chamber including humidifier console Width: 2970 mm Height: 2370 mm Depth: 1530 mm Back wall Minimum installation dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Door: double-winged, Clear opening width 2000 mm Height 1000 mm Heated viewing windows, 2 units: Width 500 mm Height 600 mm Feed-through port, 1 unit, left side wall ∅ 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature deviation, over time ≤ ± 0.5...± 1.0 ΔN/K Ramp rates measured at supply air, unloaded Podpjzd Sdmofx Afaogr Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95% relative humidity Humidity deviation, over time ≤ ± 3.0% r.h. Dew point range, intermittent: -5...95°C Cooling system: Water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Mains plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power demand: 10.0 kW Supply line protection: 3x 25 A, char. C Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data!) For further questions, please feel free to contact us by phone.

Tilstand: svært god (brukt), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z axis: 1.25 micron Precision in X and Y axis: 7.5 micron Max. extruder temperature: 500 ºC Max. build chamber temperature: 120 ºC Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum consumption: 3 kW/h 7” LCD touchscreen Remote monitoring Industry 4.0 ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Filament end sensor Pgodpfxezd Tugo Afaer Print recovery system Liquid cooling Double-hardened glass Base fixed by vacuum High printing speed Encoder-controlled positioning Condition: used Scope of delivery: (See pictures) (Sale from site!) (Subject to change and errors in technical data, information is subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Tilstand: svært god (brukt), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for many applications due to their compact, slim design. Thanks to the three installation options—floor, wall, and ceiling—the six-axis robots are easy to integrate. The fully enclosed design (IP 65) allows for use in cleanrooms or in harsh environments. Features: - Fully enclosed structure with internal supply lines - Rigid construction - Multiple installation options - Patented Stäubli JCM gear modules - Large reach Advantages: - Full protection of components - Standard version complies with cleanroom class ISO 5 - Easy to clean - Excellent dynamic path behavior - High flexibility - Precision, dynamics, and speed while reducing maintenance requirements - Optimized workspace utilization Technical Data: TYPE: TX90L Degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist): IP65 (IP67) Mounting options: Floor / Wall / Ceiling Controller: Stäubli CS8 CS8C Features: - Ethernet, fieldbus, digital I/Os, serial interfaces - Easy to integrate, 19-inch rack version, protection class IP20 - All connections on the front panel - Proven digital technology Advantages: - Open architecture - Compact - Good accessibility - Reliable Technical data: Type: CS8C Dimensions (H x W x D): 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class: IP20 (IP54 optional) Memory: 64 MB RAM (min.) Storage capacity: 128 MB (min.) flash disk and USB port System/programming language: VAL 3 (multitasking interpreter language), PLC language IEC 61131-3 Communication: Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Pgsdpjzh U Sbjfx Afasr Condition: used Scope of delivery: (See image) (Technical specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Tilstand: god (brukt), Siga Type: GS-517-400 External dimensions LxWxH: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAkkS and is therefore approved for certification-relevant tests. Butane filling rate—infinitely adjustable from 5 g/h to 77 g/h Fuel filling rate—infinitely adjustable from 5 g/h to 100 g/h Fuel temperature control—infinitely adjustable from 20°C to 50°C Selectable gasoline quantity—from 0 l to 8 l Podszg Ex Nopfx Afajgr Selectable breakthrough criterion—from 1 g to 10 g Purge air temperature—infinitely adjustable from 25°C to 30°C Precision scales for test and reference activated carbon filters—measuring range up to 6 kg, 0.1 g resolution Purge underpressure—infinitely adjustable from 0 hPa to 30 hPa Purge air flow—infinitely adjustable from 1 l/min to 60 l/min Humidity of purge airflow—infinitely adjustable from 10% rH to 85% rH Number of cycles from 1 to 999 (Filling/Purging) Condition: used Sale ex location! Scope of delivery: (See picture) (Specifications and data may be subject to change or error!) If you have any further questions, we will be happy to assist you by phone.

Tilstand: svært god (brukt), Vötsch Type: LTU 60/60 Heraeus Vötsch Dryer for Coating Materials Maximum concentration of combustible substances: 40% of the lower explosion limit (LEL) Maximum heating surface temperature: over 750 °C Machine Description: Technical Specifications: Chamber (usable space): 0.216 m³ Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: total width 796 mm, height 1725 mm, depth 850 mm Loading / Load capacity: Roller conveyor total load: 55 kg Loading height above installation base: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m³/h Purging time for 5 air changes: 90 sec Recirculating air flow rate (boosted): 33 m³/h Total steam volume: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-off temperature: Temperature limiter (TB) fixed: 300 °C Adjustable temperature selector limiter (TWB) above nominal temperature: 20 Temperature safety class (according to EN 60519-2): Temperature limiter (TB): 1 Pgsdjzg Tppepfx Afaor Temperature selector limiter (TWB): 2 Nominal temperature: 200 °C Electrical Data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Nominal power: 6.0 kW Connection load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (see image) (Technical data subject to change and errors reserved!) We are happy to answer further questions by phone.

Tilstand: god (brukt), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: - Vibration exciter: 4x LDS V721 air-cooled - Amplifier: PA 1000L - Controller: imv K2 MIMO (Multi Input Multi Output) - Software: imv K2 - Excitation modes: Sine / Random / Shock / Real-time profiles - Force vector per shaker: 2.9 kN (Peak Sine) / 1.9 kN (RMS Random) / 4.6 kN (Peak Shock) - Max payload: 100 kg per shaker - Acceleration: max. 44 g RMS / 66 g Peak - Velocity: max. 0.7 m/s - Stroke amplitude: max. 25.4 mm p-p (1 inch) - Frequency range: 5-4000 Hz - Clamping surface for test specimens: 1000 x 1000 mm aluminium profile frame Special Features: - The four shakers can be operated synchronously or asynchronously with the MIMO controller. - An aluminium profile frame enables a clamping area of 1x1 m² for large test specimens. - Without the profile frame, mobile use as a modal shaker for large specimens such as complete vehicles is possible. - The shaker’s lightweight vibrating elements enable excitation frequencies up to 4000 Hz. - Weight: 2000 kg Climatic chamber: - Manufacturer: Andreas Schmid Anlagentechnik GmbH - Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Pgedpfx Aezg Tv Nofaor - Test space: 2,000 x 2,000 x 2,000 (8m³) - External dimensions without base frame: 2,340 x 3,600 x 2,800 - External dimensions with base frame: 2,340 x 3,600 x 3,800 - External dimensions unit: 1,200 x 2,400 x 2,200 - Door: 2,000 x 2,000 - 2 pcs test space windows in door: 460 x 460 - Weight: 4,500 kg - Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 - Outer cladding: 0.6 mm sheet steel, painted RAL 7035 - Temperature range: -55°C to +140°C - Temperature constancy: ± 0.5 K over time - Climate range: +10°C to +95°C - Humidity range: 10% to 95% rH - Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of delivery: (See photo) Sample images! Current photos to follow! (Technical data subject to change and errors excepted!) Further questions can be answered gladly by phone.

Tilstand: god (brukt), TIRA Psdjzg Twmspfx Afajgr Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 8 m³ External dimensions (WxDxH): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (WxDxH): approx. 2002 mm x 2148 mm x 2005 mm Door opening (WxH): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Further questions can gladly be answered by phone.

Tilstand: god (brukt), TIRA Pgjdpfozg Tw Tsx Afaor Type: Walk-In Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660mm x 4960mm x 3300mm Test chamber (W x D x H): approx. 2270mm x 3190mm x 2756mm Door opening (W x H): approx. 2270mm x 2756mm Condition: Used Scope of delivery: (See picture) (Subject to change and error in technical data and specifications!) Should you have further questions, we are happy to answer them by phone.

Tilstand: brukt, LDS Type: V875 Shaker System V875-440 with SPA40K amplifier Vibration exciter for medium forces Technical specifications: Head expander: 850 x 850 mm Armature dimensions: 440 mm Sine force vector: 35.6 kN (peak) Random force vector: 35.6 kN (rms) Shock force vector: 106.75 kN (peak) Frequency range: 5 to 3000 Hz Specimen mass max.: 600 kg Acceleration max.: 1078.7 m/s² Velocity max.: 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Psdpfx Afozg Txweasgr Blower: 181 kg Amplifier: 622 kg Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors reserved!) If you have any further questions, we will be happy to answer them for you by phone.

Tilstand: svært god (brukt), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a test chamber of the type WaterEvent SWT 1000 by Weiss Technik—ideal for standard-compliant testing of IP water protection classes of housings or components. With optional equipment, testing according to IPX9K (high-pressure/steam-jet), ISO 20653, and other standards is possible. High-pressure / steam jet nozzles for IPX9K Jet-nozzles for IPX5/6, including: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Test Methods Depending on the configuration, the SWT system can cover a wide range of test procedures: Base configuration: IPX3 / IPX4 tests (spraying or splash water all around). Optional: Higher protection ratings up to IPX5 / IPX6 (jet water), and—with suitable high-pressure equipment—up to IPX9 or IPX9K. Tests are based on standards such as DIN EN 60529 (for IP ratings) or ISO 20653 (e.g. for automotive or outdoor applications)—depending on requirements. Typical Applications Typical use cases for this test chamber include: - Electronic devices or enclosures that are to be operated outdoors or in humid environments, e.g. outdoor lighting, control enclosures, units, panels. - Components for vehicles or machinery, especially if they are exposed to rain, splash water, or high-pressure cleaning (e.g. construction machinery, e-bike or vehicle parts). - Batteries or electrical components that require water protection testing—e.g. in the automotive or e-mobility industry. Technical Data: Suitable protection ratings: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (SWT 1000)—optional up to 400 mm. Pjdpfxezil T Se Afaogr Test chamber (interior): Inner dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W x H x D) Operation / Control: Web panel or graphical user interface (GUI) for programming and controlling tests. Condition: used Scope of delivery: (see images) (Specifications and technical details subject to change and correction!) For further questions, please feel free to contact us by phone.

Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, totalvekt: 177 kg, drivstofftype: bensin, farge: gul, effekt: 13,5 kW (18,35 hk), utgangsstrøm: 16 A, Wacker Neuson GS 12 AI Generator – NEW | Continuous output from 5.0 to 9.4 kVA | 12 kW Honda petrol engine | Electric start | 230 / 400 V voltage | incl. chassis | 177 kg operating weight Article number: 5000620317 Pgjdjzh Dv Njpfx Afajr Technical Data: Manufacturer: Wacker Neuson Model: GS 12 AI Condition: NEW Operating weight: 177 kg Continuous output: from 5.0 to 9.4 kVA Engine: Honda GX 630 petrol engine Engine output: 12 kW Starting system: Electric Voltage: 230 V / 400 V Connections: 2 x Schuko 230 V / 16 A, 1 x CEE 230 V / 16 A, 1 x CEE 400 V / 16 A 1~ CEE 7/3 Feature: Incl. chassis Highlights & Equipment: - Powerful generator – ideal for construction sites & commercial use - Robust Honda engine – reliable & easy to maintain - Electric start – convenient & quick - Integrated chassis – mobile & flexible application - Made by Wacker Neuson – proven quality & available immediately Fields of Application: ✓ Construction site supply & trades ✓ Events & temporary power supply ✓ Agriculture & municipal operations ✓ Workshop & emergency power supply ✓ Commercial applications Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: nationwide & international upon request Pricing: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! Including GV 7003 A etc. in our portfolio ➡️ New & used machines, accessories & spare parts Wacker Neuson generator for sale | GS 12 AI NEW | 12 kW Petrol Generator | Construction site generator with 400/230 V | Honda GX 630 engine | Wacker Neuson quality Your reliable partner for generators & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new machines! If required, we are happy to offer you a virtual viewing of the machine via video call.

Tilstand: brukt, funksjonstestet; Varen stammer fra demontering av utstyr hos en bilunderleverandør 2 stk tilgjengelig Produsent: APC by Schneider Electric Modell: SMX1500RMI2U Type: Avbruddsfri strømforsyning (UPS) Pedozgaxwjpfx Afajgr Effekt: 1500 VA / 1200 W Inngangsspenning: 230 V AC Utgangsspenning: 230 V AC Utganger: 8 × IEC C13, 1 × IEC C19 Kommunikasjon: USB, RS-232, SmartSlot Batteritype: Vedlikeholdsfrie, forseglede blybatterier Format: 2U rack/tårn Egenskaper: LCD-display, AVR, strømsparingsmodus, utvidbar driftstid

Tilstand: svært god (brukt), Vacuubrand chemical diaphragm pump We offer a Vacuubrand chemical diaphragm pump for sale. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: - Max. pumping speed at 50Hz: 8.1 m³/h - Ultimate vacuum: 2 mbar / 1.5 torr - Ultimate vacuum with gas ballast: 10 mbar / 7.5 torr - Number of cylinders: 8 - Number of stages: 4 - Vacuum display/controller type: without controller - Ambient temperature, lower limit (operation): 10°C - Ambient temperature, upper limit (operation): 40°C - Ambient temperature, lower limit (storage): -10°C - Ambient temperature, upper limit (storage): 60°C - Max. outlet pressure (absolute): 1.1 bar - Inlet connection: small flange KF DN 25 - Outlet connection: small flange KF DN 16 - Rated power: 0.5 kW - Minimum rotational speed (VARIO): 30 rpm - Maximum rotational speed: 1500 rpm - Nominal speed: 1500 rpm - IP protection class according to IEC 60529: IP 54 - Dimensions (L): 560 mm - Dimensions (W): 457 mm - Dimensions (H): 410 mm - Weight: 61 kg - Noise level (sound pressure) at 50 Hz and 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®): 42 dBA - EX certification pump chamber (pumped gases): II 2G Ex h IIC T3 Gb X; external with inert gas purging: II 2G Ex h IIB T4 Gb X; external without inert gas purging: II 3G Ex h IIB T4 Gc X; motor: II 2G Ex db IIB T4 Gb - NRTL certification: No - Rated voltage range 1: 230 V - Mains frequency voltage range 1: 50 Hz - Weight: 61 kg - Type: MV 10C EX VARIO - Condition: used Psdpszgci Sjfx Afaegr - Scope of delivery: (see photo) (Technical data and information are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Tilstand: god (brukt), Du kan by på en merket platesaks fra den tyske, anerkjente produsenten Schröder i god stand. Egenskaper ved maskinen: - Saks Schröder MHSU - Kapasitet i henhold til typeskilt: opptil 3 mm stål – betydelig mer for aluminium - Nyttelengde: litt over 2 m - Bakanslag manuelt ca 750 mm / 1000 mm med digitalvisning - Side-/vinkelanslag - Anslagforlengelse til 2 m - Vendeblad - Klippegapbelysning - Plateutskyt - Fotpedal - Vekt ca 1,3 tonn Vi har også andre maskiner tilgjengelig, som Schechtl MAX 200 – 2,5 mm eller Schechtl MA 200 – 2 mm og HA, Schröder AKV 2 mm, KSV 1,5 mm og KS 1 mm, samt kantpressere og sakser fra RAS m.m. Veiledende nypris eks. mva. er nå ca. €25 000 Du får faktura med spesifisert mva. Pedpfx Afoy R Efajajgr Mva. er inkludert i fakturabeløpet. Frakt kan organiseres om ønskelig, truck er tilgjengelig. Kostnadsfri opplasting som vist på bildene. Besiktigelse og test mulig etter avtale per telefon. Betaling kontant ved henting – ta gjerne kontakt hvis du har spørsmål – takk. Vennligst hent maskinen innen 8 dager etter auksjonsslutt. Sted: 97249 Eisingen (3 minutter fra motorveien) Artikkelnummer: Schröder MHSU 2m 3mm 260511

Tilstand: svært god (brukt), Byggeår: 2010, styretype: CNC-styring, kontrollerprodusent: SIEMENS, kontrollermodell: SIEMENS 840D, laser effekt: 4 400 W, bordlengde: 3 000 mm, bordbredde: 1 500 mm, vandring X-akse: 3 048 mm, vandring Y-aksen: 1 524 mm, bevegelsesavstand Z-akse: 170 mm, mating X-akse: 80 000 m/min, matingshastighet Y-akse: 80 000 m/min, totalvekt: 20 000 kg, total lengde: 12 000 mm, total bredde: 6 000 mm, total høyde: 6 500 mm, Laserskjæremaskin BYSTRONIC - ByLaser 4400 MASKIN-ID 9635 Produsent: BYSTRONIC Modell: ByLaser 4400 Styring: SIEMENS 840D Årsmodell: 2010 BYSTRONIC BYTRANS lastearm med posisjonsbytte BYSTRONIC BYTOWER plate-lager Skiftebord for inn- og utløpshåndtering Støvutskiller 5,0-tommers skjærehode 7,5-tommers skjærehode Inspeksjon under strøm mulig! Arbeidsområde X-akse: 3048 mm Arbeidsområde Y-akse: 1524 mm Arbeidsområde Z-akse: 170 mm Bordlengde: 3000 mm Bordbredde: 1500 mm Laserkilde: 4,4 kW / Amp Psdpfx Aey U Httefaogr Matehastighet X-akse: 80000 mm/min. Matehastighet Y-akse: 80000 mm/min. Lastearm: Ja, BYTRANS Platemagasin: Ja, BYTOWER Utsug: Ja Skjæretimer: 26000 t Lengde: 12000 mm Bredde: 6000 mm Høyde: 6500 mm Vekt: 20000 kg Vennligst merk: Informasjonen på denne siden er hentet etter beste evne fra oss, og så langt som mulig, fra produsenten. Informasjonen gis i god tro, men nøyaktighet kan ikke garanteres. Følgelig representerer de ikke garantier eller kontraktsbetingelser. Vi anbefaler at alle viktige detaljer blir verifisert.

Tilstand: svært god (brukt), Byggeår: 2017, Batchblander type WBX 1100 1 Control unit for mixer with frequency converter 1 Knife head 5.5 kW 1 Manual shut-off valve 1 Separate control panel ("remote control") - Maximum usable volume: 770 liters - Mixing product: plastic granulate - Bulk density: approx. 0.7–0.8 kg/liter - Product properties: free-flowing - Mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum - Horizontal cylindrical mixing drum - End walls bolted to drum Mixing tool - Mixing tools as ploughshares or inclined shovels, bolted onto paddle arms in slots Bearing - Shaft mounted in externally located flange bearing housings with roller bearings Pgsdpoza Ap Tjfx Afaer Sealing - Shaft seal with easily replaceable stuffing box packings, stuffing box packings with air purge Feeding - 2 ports with flange, according to dimensional sheet Ventilation - via 1 port with flange, according to dimensional sheet - with filter bag incl. holder and welded-in protective grid Discharge - via dead-space-free closing flap, pneumatically actuated - 1 discharge port with flange, according to dimensional sheet Liquid addition possibility - none Inspection and cleaning - via 1 flap at the front of the drum (1700 x 550) Flap closed with quick-release fastener - Occupational and accident safety by interlocking magnet and limit switch (not wired) Materials - Mixing drum made of: Stainless steel 1.4306 - Mixer shaft made of: Stainless steel 1.4306 - Mixing tool made of: Stainless steel 1.4306 Prior sale reserved Inquiries by email only, please Note: The machine is in storage and can be inspected on site. The buyer must organize shipping. This is not included in the offer price.

Tilstand: ny, Plate width 3100 mm Plate thickness 6.0 mm Plate thickness for stainless steel 4.0 mm Frame opening 3100 mm Hold-downs 14 units Oil capacity 150 ltrs Strokes per minute 18 Shearing angle 1.2° Control CYBELEC CybTouch Total power requirement 11.0 kW Weight 6,300 kg Dimensions L-W-H 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you a robust and durable machine for economical sheet metal processing with its hydraulic swing beam shear, model series HGS. This compact all-rounder lets you increase your productivity. The hydraulic swing beam shear HGS supports you with precise, fast and cost-efficient cuts in your day-to-day operations. Hydraulic hold-downs secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient shearing for your operator. The CNC control allows you to use different sheet materials already stored in the integrated material library. After selecting the maximum thickness, the optimal blade gap is automatically set electro-hydraulically by the CNC control but can also be adjusted manually. The position and retract function of the motorized backgauge can be set easily via touchscreen. Furthermore, the controller offers storage for cutting programs with cut sequences. ----- robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touchscreen controller * including CNC electro-hydraulic blade gap adjustment ----- Equipment features: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touchscreen controller, model "CybTouch 8" Pgsdpfx Afsxaa D Heasr - some CNC control functions: * Backgauge setting – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting to scribe line) ...and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * on ball screw spindles * automatically swings up at maximum travel range for longer cuts * including retract function selectable ("Swing-Away function") * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Fold-up finger guard with safety switch * finger guard with viewing windows for cutting to scribe line - Cutting line illumination with shadow function - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety feature) - Free-moving foot switch - CE mark/declaration of conformity - Operating manual + circuit diagram + hydraulic diagram including special equipment: - Pneumatic sheet support device for thin sheet cutting

Tilstand: ny, Bore capacity in steel (diameter): 60.0 mm Overhang: 350 - 1,600 mm Psdpfjxaa H Uox Afaegr Workpiece height - max.: 665 x 1,250 mm Spindle speed: 38 - 2,000 rpm Spindle taper: MT 5 Base plate: 960 x 1,760 mm Tapping capacity: M42 Quill stroke: 325 mm Total power requirement: 4.0 kW Machine weight approx.: 3,800 kg Dimensions (L x W x H): 2,600 x 1,100 x 2,770 mm Features: - Stepless speed regulation as standard - Set speed is read off a digital display - Drill spindle with high concentricity accuracy - Equipped with an automatic spindle brake - Boom arm, drilling head, and column with independent hydraulic clamping - Large base plate, ideal for machining large workpieces - Thick-walled, ground column for increased sliding properties of the boom - Easy height adjustment of the boom arm via lifting motor - Spindle position remains unchanged, ideal for series work - By means of a push-button, the drilling head and column can be optionally clamped or released simultaneously - Guideways on the boom are hardened and ground - Quill weight compensation via counterweight - Ideal for drilling, countersinking, reaming, and tapping Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B 16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial filling with Shell Tellus 46 - Coolant system - Frequency converter - Digital speed display - Lifting motor - Hydraulic motor - Height-adjustable safety cover - Operating tools

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1988, lastekapasitet: 1 600 kg, mastetype: simplex, -KOM 3150- Here we offer a used Still R 70-16 forklift truck. The forklift is fully operational and features a VW diesel engine with a generator. The drive is electric! This forklift is very maneuverable for a four-wheel forklift. Technical specifications: Pedpswz D Hqjfx Afaegr Length (without forks): approx. 2000 mm Width: approx. 1000 mm Height: approx. 2300 mm Type: R70-16 Serial no.: 70311018 Fuel: Diesel Unladen weight: 2,789 kg Load capacity: 1,600 kg Total weight: 4,860 kg Permissible front axle load: 4,260 kg Permissible rear axle load: 1,650 kg Year of manufacture: 1988 The forklift can be inspected and tested in 33161 Hövelhof by appointment. For further information, please refer to the images!

Tilstand: ny, Byggeår: 2025, lastekapasitet: 1 500 kg, løftehøyde: 5 400 mm, drivstofftype: elektrisk, mastetype: triplex, byggehøyde: 2 425 mm, batterikapasitet: 202 Ah, batterispenning: 80 V, gaffellengde: 1 200 mm, egenvekt: 2 620 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are refurbished in accordance with FEM-4.004 and up-to-date safety standards – guaranteeing maximum quality and your safety. From frame to battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with Responsibility and Precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on-site and get expert advice – we’ll find the right solution for you. Industrial Truck Specifications: - Manufacturer: Heli - Model: Counterbalance Forklift CPD15-G3-3 - Drive type: Electric - Load capacity: 1,500 kg - Year of manufacture: 2025 - Operating hours: 0 - Lift height: 5,400 mm - Mast type: Triplex - Full free lift: Yes - Overall height: 2,425 mm - Fork length: 1,200 mm - Unladen weight: 2,620 kg - Tires: Solid rubber - Model designation: CPD15-G3-3 - Battery type: Lithium-ion - Voltage: 80 V - Capacity: 202 Ah Pgedpfx Ajy Rptzefajr - Battery weight: 280 kg - Charger: Integrated charger - Lighting: 2x front work lights - Lighting: 2x rear work lights - Lighting: Rotating beacon - Lighting: Road equipment for limited on-road use in accordance with StVO (German Road Traffic Regulations): Indicator, tail light, reverse light, reflectors, etc. - Attachment: Side shifter - Attachment: Additional hydraulic circuit routed to carriage

Tilstand: helrenovert (brukt), Byggeår: 2017, driftstimer: 7 771 h, lastekapasitet: 2 500 kg, løftehøyde: 122 mm, lastsenter: 1 200 mm, drivstofftype: elektrisk, mastetype: simplex, byggehøyde: 1 400 mm, batterispenning: 24 V, gaffellengde: 2 400 mm, egenvekt: 599 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards—for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and overhauled. ? Made in Germany—with responsibility and precision ? Rigorous technical inspection ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personalized support—even after purchase Test and get advice on-site—let us find the right solution for you. Industrial Truck Specifications: - Manufacturer: Jungheinrich - Model: Order Picker ECE 225 XL - Drive: Electric - Load capacity: 2,500 kg Pedpfx Afsy Rq Rhoaegr - Year of manufacture: 2017 - Operating hours: 7,771 - Lift height: 122 mm - Mast type: None - Initial lift: Yes - Height: 1,400 mm - Fork length: 2,400 mm - Unladen weight: 599 kg - Load center: 1,200 mm - Tyres: Polyurethane - Model type: ECE 225 XL - Battery type: PzS - Voltage: 24 V - Battery weight: 535 kg

Tilstand: god (brukt), Byggeår: 2011, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 104605-104645, inngangsspenning: 400 V, total bredde: 1 500 mm, total lengde: 4 500 mm, total høyde: 2 820 mm, type innstrømsstrøm: trefaset, Fortuna Primus K4 – 4-Row Roll Line – Docker + Rounding Unit + GEK, Year of Manufacture 2011 Dough Divider & Rounder Condition: Fully functional, directly from ongoing production. Application: Round rolls, e.g. Kaiser rolls, plaited rolls, salted rolls, wheat & mixed doughs. • Weight range: approx. 40–110/120 g • Hourly output: approx. 4,800 pcs/h Pedpfx Afey St U Soajgr • Rounding chamber height: approx. 10–35 mm • Rounding speed: Scale 0–30 • Hopper capacity: 20–25 kg • Dough yield: DY 160–165 • Power requirement: approx. 1.5 kW • Machine weight: 650–700 kg • Depositing unit: for 60×80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK intermediate proofer matched to the line • Docker/stamper sets: Kaiser rolls, plaited rolls, salted rolls • Complete depositing unit • Immediately operational • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TEST RUN by appointment only. Shipping possible, fully assembled by jumbo truck. (Dimensions L/W/H = approx. 4,500mm x 1,500mm x 2,820mm)

Tilstand: svært god (brukt), Mitutoyo Type: QV-L404Z1L-D Product Description: For sale is a CNC vision measuring system from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurement in production, quality assurance, and research applications. Technical Data: Make / Model: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment Included: - Control PC with QVPAK measuring software - 2 × 22" TFT monitors - Keyboard & mouse - Control panel - Swivel caster chair for comfortable operation Scope of Delivery - Mitutoyo Quick Vision Active 404 measuring system - Control PC with QVPAK - 2 × 22" TFT monitors - Keyboard, mouse - Control panel - Swivel caster chair Condition: used Scope of delivery: (see photo) Podpfx Aezii Dujfajgr (Modifications and mistakes in the technical data and specifications excepted!) We are happy to answer any further questions by phone.

Tilstand: svært god (brukt), Vötsch Type: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Change rate: Cooling approx. 3.5 K/min. Change rate: Heating approx. 4 K/min. Temperature testing Pgedpeziyvujfx Afaer Temperature range: -40°C to +180°C Layout plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your peace of mind as a buyer, the following information: The following work is carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of supply: (See picture) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.