Kjøp brukt Seewer Rondo Sheeter (333)

Tilstand: svært god (brukt), 470 BRUKT Fryserom, kjøle- og hevekammer Miwe GVA (21 og 22). YTRE DIMENSJONER (i cm): - bredde 561 Gksdpfx Ajzry Iien Eea - lengde 572 INDRE DIMENSJONER (i cm): Kammer nr. 21: - bredde 210 - lengde 525 Kammer nr. 22: - bredde 280 - lengde 525 TEKNISKE DATA: - kjølemiddel: R404a - strømforsyning: 400V 50Hz - effekt (21): 31kW - effekt (22): 35,1kW Prisen gjelder for 1 kammer. Tilgjengelige tilleggsvalg mot betaling: transport. Oppgitt pris er en netto pris. VI SNIKKER ENGELSK, TYSK, FRANSK, RUSISK, UKRAINSK. I vårt sortiment finner du: bakerovner, vognovner, hylleovner, konditorovner, butikkovner, elektriske ovner, oljeovner, gassovner, termooljeovner, bakerimaskiner, bakeriutstyr, brødlinjer, rundstykkelinjer, kakelinjer, croissantlinjer, maskiner for bagetter, eltemaskiner, miksere, valsemaskiner, maskiner for å lage horn. Hvis du ønsker å se vårt komplette og oppdaterte sortiment, besøk vår Bakeres-profil.

Tilstand: svært god (brukt), Byggeår: 2018, 502 BRUKT Butikkovn, elektrisk Miwe Backcombi. Ovnen består av to moduler: Miwe Condo CO 0806 og Miwe Aeromat AE 4.0604. YTRE DIMENSJONER (i cm): - bredde 110 - lengde 123 (145 med hette) - høyde 225 TEKNISKE DATA: - produksjonsår: 2018 - Miwe Condo-ovn: 2 kamre for plater 60x80, høyde 14 cm - Miwe Aeromat-ovn: 4 nivåer for plater 60x40 - strømforsyning: 400V 50Hz - effekt: 20,4 kW UTSTYR: - hette - dampfunksjon Tilleggsutstyr mot betaling: transport. Oppgitt pris er nettoppris. VI SNIKKER ENGELSK, TYSK, FRANSK, RUSISK OG UKRAINSK. Gksdpfx Ajzrt Tfjn Esa I vårt sortiment finner du: bakerovner, tralleovner, hylleovner, konditorovner, butikkovner, elektriske ovner, oljeovner, gassovner, termo-oljeovner, bakeutstyr, bakerimaskiner, brødlinjer, rundstykkelinjer, kakelinjer, croissantlinjer, baguettmaskiner, eltemaskiner, miksere, valsemaskiner, croissantmaskiner. Hvis du ønsker å se vårt komplette og oppdaterte tilbud, gå til vår Bakeres-profil.

Tilstand: svært god (brukt), Byggeår: 2018, 501 BRUKT Hyllesovn, butikkmodell, elektrisk Miwe Condo CO 4.0806. EKSTERNE DIMENSJONER (i cm): - bredde 110 - lengde 120 (150 med hette) - høyde 212 INTERNE DIMENSJONER PÅ STEKEKAMMERET (i cm): - bredde 80 - lengde 63 Gkedpfxjzrtcts An Esa - høyde 14 TEKNISKE DATA: - produksjonsår: 2018 - 4 kamre for brett 60x80 - strømforsyning: 400V 50Hz - effekt: 23kW UTSTYR: - hette - dampfunksjon Tilgjengelige tilleggsvalg mot betaling: transport. Oppgitt pris er netto pris. VI SNKKER ENGELSK, TYSK, FRANSK, RUSSK OG UKRAINSK. I vårt sortiment finner du: bakeriovner, tralleovner, hyllesovner, konditoriovner, butikkovner, elektriske ovner, oljeovner, gassovner, termooljeovner, bakerimaskiner, bakeriutstyr, linjer for brød, linjer for rundstykker, linjer for kaker, linjer for croissanter, maskiner for baguetter, eltemaskiner, miksere, valsemaskiner, maskiner for å lage horn. Hvis du ønsker å se vårt komplette og oppdaterte tilbud, gå inn på vår Bakeres-profil.

Tilstand: svært god (brukt), Byggeår: 2014, 500 BRUKT Hyllesteinsovn, butikkmodell, elektrisk Miwe Condo CO 4.0604. EKSTERNE MÅL (i cm): - bredde 90 - lengde 100 (137 med hette) - høyde 220 INTERNE MÅL FOR STEKEKAMMERET (i cm): - bredde 60 - lengde 43 - høyde 15 (3 nederste), 20 (øverste) TEKNISKE DATA: - produksjonsår: 2014 - 4 kamre for stekebrett 60x40 - strømforsyning: 400V 50Hz Gjdpfx Anezrtb Ao Eska - effekt: 17,3kW UTSTYR: - hette - dampfunksjon Tilgjengelige tilleggsvalg mot betaling: transport. Oppgitt pris er nettoppris. VI SNITTER ENGELSK, TYSK, FRANSK, RUSISK, UKRAINSK. I vårt sortiment finner du: bakerovner, vognovner, hyllesteinsovner, konditorovner, butikkovner, elektriske ovner, oljeovner, gassovner, termooljeovner, bakeutstyr, bakeapparater, brødlinjer, rundstykkelinjer, kake-, croissantlinjer, baguette-maskiner, eltemaskiner, miksere, valsemaskiner, wienerbrødmaskiner. Hvis du ønsker å se vårt komplette og oppdaterte sortiment, besøk vår Bakeres-profil.

Tilstand: svært god (brukt), 499 BRUKT Butikkstekeovn, elektrisk Miwe Aeromat 8.64. YTRE DIMENSJONER (i cm): - bredde 105 Gsdpfszrtaljx An Eeka - lengde 90 (123 med hette) - høyde 210 TEKNISKE DATA: - 8 nivåer for brett 60x40 - strømforsyning: 400V 50Hz - effekt: 14kW UTSTYR: - hette - dampfunksjon Tilgjengelige tilleggsvalg mot betaling: transport. Oppgitt pris er nettoppris. VI SNIKKER ENGELSK, TYSK, FRANSK, RUSISK, UKRAINSK. I vårt sortiment finner du: stekeovner, tralleovner, hyllestekeovner, konditorovner, butikkstekeovner, elektriske ovner, oljeovner, gassovner, termooljeovner, bakeutstyr, bakemaskiner, brødlinjer, bollelinjer, kakelinjer, croissantlinjer, baguettmaskiner, eltemaskiner, miksere, valsemaskiner, croissantmaskiner. Hvis du ønsker å se vårt komplette, oppdaterte tilbud, gå til vår Bakeres-profil.

Tilstand: svært god (brukt), Byggeår: 2005, 498 BRUKT Butikkovn, elektrisk Miwe Aeromat AE 8.0604. Gkodpfozrr Uzsx An Esa YTRE MÅL (i cm): - bredde: 90 - lengde: 100 - høyde: 190 TEKNISKE DATA: - produksjonsår: 2005 - 8 nivåer for plater på 60x40 - strømforsyning: 400V 50Hz - effekt: 15,4kW UTSTYR: - dampfunksjon Tilgjengelige tilleggsutstyr mot betaling: transport. Oppgitt pris er nettoppris. VI SNAKKER ENGELSK, TYSK, FRANSK, RUSISK OG UKRAINSK. I vårt sortiment finner du: bakerovner, vognovner, hyllestovner, konditorovner, butikkovner, elektriske ovner, oljeovner, gassovner, termooljeovner, bakeutstyr, bakerimaskiner, linjer for brød, linjer for rundstykker, linjer for kaker, linjer for croissanter, maskiner for bagetter, eltemaskiner, miksere, valsemaskiner, maskiner for å lage horn. Hvis du vil se vårt komplette og oppdaterte utvalg, besøk vår Bakeres-profil.

Tilstand: svært god (brukt), 497 BRUKT Butikkovn, elektrisk Miwe Aeromat AE 8.0604. EKSTERNE DIMENSJONER (i cm): - bredde 90 - lengde 100 - høyde 191 TEKNISKE DATA: - 8 nivåer for plater på 60x40 - strømforsyning: 400V 50Hz - effekt: 15,4kW UTSTYR: - dampfunksjon Gksdpfxjzrr Ubj An Esa Tilgjengelige tilleggsvalg (mot betaling): transport. Oppgitt pris er nettoppris. VI SNIKKER ENGELSK, TYSK, FRANSK, RUSISK OG UKRAINSK. I vårt sortiment finner du: bakerovner, vognovner, hylllovner, konditoriovner, butikkovner, elektriske ovner, oljeovner, gassovner, termo-oljeovner, bakeutstyr, bakerimaskiner, linjer for brød, linjer for rundstykker, linjer for kaker, linjer for croissanter, maskiner for bagetter, eltemaskiner, miksere, valsemaskiner, maskiner for produksjon av horn. Hvis du ønsker å se vårt komplette og oppdaterte utvalg, gå til vår Bakeres-profil.

Tilstand: svært god (brukt), 496 BRUKT Butikkovn, elektrisk Miwe Aeromat 8.64. YTRE MÅL (i cm): - bredde 90 - lengde 103 - høyde 191 TEKNISKE DATA: - 8 nivåer for plater på 60x40 - strømforsyning: 400V 50Hz Gjdszrr Tkepfx An Eoka - effekt: 14kW UTSTYR: - dampfunksjon Tilgjengelige tilleggsvalg mot betaling: transport. Oppgitt pris er nettoppris. VI SNIKKER ENGELSK, TYSK, FRANSK, RUSISK OG UKRAINSK. I vårt sortiment finner du: bakerovner, tralleovner, hyllarovner, konditorovner, butikkovner, elektriske ovner, oljeovner, gassovner, termo-oljeovner, bakeutstyr, bakeapparater, brødlinjer, bollelinjer, kakelinjer, croissantlinjer, baguettmaskiner, deigmikser, miksere, valsemaskiner, croissantmaskiner. Hvis du ønsker å se vårt komplette og oppdaterte sortiment, besøk vår Bakeres-profil.

Tilstand: svært god (brukt), 495 BRUKT Butikkstekeovn, elektrisk Miwe Aeromat 8.64. YTRE DIMENSJONER (i cm): Gkjdpfx Anjzrr Syo Eoa - bredde 90 - lengde 95 - høyde 191 TEKNISKE DATA: - 8 nivåer for brett 60x40 - strømforsyning: 400V 50Hz - effekt: 14kW UTSTYR: - avtrekk - dampfunksjon Tilleggsutstyr mot betaling: transport. Oppgitt pris er nettoppris. VI SNIKKER ENGELSK, TYSK, FRANSK, RUSISK, UKRAINSK. I vårt sortiment finner du: stekeovner, vogndrevne ovner, hyllestekeovner, konditorovner, butikkstekeovner, elektriske ovner, oljeovner, gassovner, termooljeovner, bakeutstyr, bakeapparater, linjer for brød, linjer for rundstykker, linjer for kaker, linjer for croissanter, maskiner for baguetter, eltemaskiner, miksere, valsemaskiner, maskiner for å lage horn. Hvis du ønsker å se vårt komplette og oppdaterte tilbud, gå til vår Bakeres-profil.

Tilstand: god (brukt), Plate clamp, sheet clamp, beam clamp, beam claw, plate grab, material grab, material gripper Gjdeb A S A Eepfx An Ejka - Sheet clamps - Clamping range: 0 to 55 mm - Load capacity: 9,000 kg - Quantity: 2 clamps available - Price: per piece - Weight: 28 kg/piece

Tilstand: god (brukt), Plate bundle pallet, sheet metal spreader beam, sheet bundle rack - Load capacity: 10 t - Suitable for crane/forklift operation Gkedpeb A I R Rofx An Eea - Dimensions: 3000/1800/H420 mm - Quantity: 3 units available - Price: per unit - Weight per unit: 300 kg

Tilstand: brukt, Plate clamp, plate claw, beam clamp, beam claw, sheet metal gripper, material gripper - Plate claws - Clamping range: 10 to 27 mm - Load capacity: 2,500 kg Gkjdpfx Anodi Slbo Eea - Quantity: 1x clamp available - Price: per piece - Weight: 14 kg/piece

Tilstand: god (brukt), Byggeår: 2016, Funksjonalitet: fullt funksjonell, XEIKON 8800 – 8000-serien Produksjonsår: 2014 Komplett med Hunkeler avrullingsenhet, type UW6-C / 7199, og Hunkeler arkutstyre Xeikon 8800 er en profesjonell digital trykkepresse for rullmateriale, designet for krevende kommersielle, dokument- og variabeldata-trykkapplikasjoner. Xeikon fortsetter å beskrive 8800 som en produksjonsplattform som brukes for komplekse variabeldata- og trykk-etter-behov-applikasjoner. En stor fordel med denne maskinen er kombinasjonen av Xeikons digitale trykkepresse med profesjonelt Hunkeler-utstyr for håndtering av rullmateriale og arkutstyre, som skaper en komplett produksjonslinje fra rull til ark. _____ MASKINKONFIGURASJON Digital trykkepresse Produsent: Xeikon Modell: Xeikon 8800 Serie: 8000-serien År: 2014 Teknologi: Tørrtoner elektrofotografisk digitaltrykk Anvendelse: Kommersiell og dokumenttrykk Konfigurasjon: Produksjonslinje fra rull til ark Medfølgende utstyr • Xeikon 8800 digital trykkepresse • Hunkeler avrullingsenhet • Type: UW6-C • Identifikasjon / Nr.: 7199 • Hunkeler arkutstyre • Total lengde på rullmateriale: 26 906 984 m • A3-teller: 90 595 906 A3-trykk • Produksjonskonfigurasjon fra rull til ark • Digital front-end / arbeidsflyt-konfigurasjon, bekreftes • Ytterligere tilbehør i henhold til maskinens faktiske utstyr _____ XEIKON-TRYKKTEKNOLOGI Xeikon 8000-serien bruker QA-P tørrtonerteknologi, som er utviklet spesielt av Xeikon for dokument- og kommersielle trykkapplikasjoner. Xeikon oppgir en oppløsning på 1200 dpi for denne toner-/plattformgenerasjonen. Viktige egenskaper • Digital trykkteknologi med tørrtoner • 1200 dpi oppløsning • Profesjonell fullfargetrykk • Egnet for konvensjonelle trykkmedier Gsdpfx Ansztqxns Eska • Ingen trykkplater nødvendig • Mulighet for variabeldatatrykk • Digitale jobbendringer uten konvensjonell klargjøring • Egnet for korte, mellomstore og variable produksjonsopplag Xeikon oppgir at QA-P-toneren for 8000-serien er kompatibel med konvensjonelle trykkmedier og er spesielt utviklet for høykvalitets kommersiell og dokumenttrykk. (Xeikon) _____ FARGESYSTEM Xeikon-teknologien gir profesjonell digital fargereproduksjon basert på tørrtoner. Avhengig av den installerte maskinkonfigurasjonen støtter Xeikons QA-P-tonerplattform: • CMYK • Hvit • Rød • Grønn • Blå • Oransje • Klar • Super svart • Egendefinerte spesialfarger Den faktiske installerte fargekonfigurasjonen for denne spesifikke Xeikon 8800 bør bekreftes på maskinen før endelig salg. _____ TRYKKVALITET Høyoppløselig digitalproduksjon Oppløsning: 1200 dpi

Tilstand: svært god (brukt), Byggeår: 2022, YAWEI HLF fiber laser machine with TOP configuration - IMMEDIATELY AVAILABLE Laser power: 8kW IPG Sheet format: 6000 x 2000mm automatic shuttle table Siemens touchscreen control with LAN/USB sheet thickness measurement Siemens drives Gksdpfxjvzqptj An Eja Precitec Auto Focus Procutter cutting head with autofocus IPG YLS resonator with 8kW The machine is offered "all-inclusive" with: 1 year warranty CAD CAM software commissioning Delivery within Germany and operator/software training. We even support you on-site during unloading and installation. The machine is a used machine and available on short notice. It will be overhauled before delivery and comes with a 1-year warranty. A similar machine in a different format can be tested under power at our site at any time. In our showroom, we have various laser machines from our manufacturers under power as well as different materials for testing. We cordially invite you to visit us, and you are welcome to cut your own drawings and/or materials. For 15 years, we have been the exclusive trading house and service provider for YAWEI machines. Call us and visit us! We always have several YAWEI fiber lasers incoming to ensure short delivery times.

Tilstand: svært god (brukt), CTS Type: CTS CW+40/7/7 Walk-in Climate Chamber CTS Walk-in Climate Chamber 7m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test chamber CTS CW+40/7/7 in industrial design. This unit is designed for simulating defined temperature and climatic conditions for the testing of materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures an even climate distribution throughout the entire test chamber. The walk-in design allows testing of large components or complete systems. Technical Data: Manufacturer: CTS – Clima Temperatur Systeme Type: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test chamber Test volume: 2 × 7 m³ Electrical Data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic Data: Temperature range: +40 °C to +90 °C Humidity range: 10% to 90% RH Dew point range: +30 °C to +87 °C Protection class: IP44 Internal Dimensions: Width: 1,400 mm, Depth: 1,300 mm, Height: 2,250 mm External Dimensions (Overall system): Width: 3,511 mm, Depth: 2,765 mm, Height: approx. 2,515 mm (overall) Gjdoylmamepfx An Eoka Additional Technical Data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Interior: Stainless steel Exterior: Powder-coated sheet steel (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2,000 kg Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Tilstand: svært god (brukt), TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air treatment room - Humidification system - Machinery room - Control cabinet Technical Data: Gkedpfx Ajzizk Hon Esa Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, supply air (over time): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 T13 / EN 60068) - Temperature stability, supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (according to DIN 50011): approx. 2.0 K/min (without thermal test room load, according to DIN 50011 / EN 60068, without test specimen, in the temperature range of -30°C to +85°C) - Cooling rate (according to DIN 50011): approx. 2.0 K/min (without thermal test room load, according to DIN 50011 / EN 60068, without test specimen, in the temperature range of -30°C to +85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity operating range: 10...approx. 95% RH (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (supply air, over time): ≤ ± 2.5% RH (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test room load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: - Air guidance: Supply air via perforated sheet at rear wall, in ceiling area; exhaust air via perforated sheet at rear wall, in floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating by electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior liner: Stainless steel - Exterior cladding: Galvanized, plastic-coated sheet steel - Floor design: Stainless steel, floor load capacity 15,000 N/m², wheel load (contact area ≥4cm²) 1500 N/wheel - Door: Double-leaf door, stainless steel, externally coated with viewing window (W x H): 1000 x 1000 mm - Test chamber lighting: 4 spotlights, 500 W each - Insulation: Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Colors: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL7032, pebble grey - Control cabinet: RAL7032, pebble grey Weights: - Total unit: approx. 4900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Tilstand: brukt, Bertuetti universalkutter for deig. I fungerende stand. Leveres med to børster. Belte, 400 mm bredt. En ekstra kutter følger med. Godetpvt Topfx An Eoka Pris: 590 € Vi kan ordne frakt dersom du ønsker det.

Tilstand: brukt, SincoTec Type: Exciting Mot POWER SWINGLY 20 kN Resonance Test Stand The POWER SWINGLY BigTable resonance test stand is designed as a two-mass oscillator. It consists of a vibration head, excited by an imbalance motor driven by a frequency-controlled asynchronous motor. The vibration head is located at the top of the machine and generates the dynamic amplitude. The vibration head is supported against the upper crossbar via preloaded compression springs and is centrally guided. The mid-load drive is located in the lower part of the machine and applies the static preload by means of a geared motor via a spindle drive. The specimen chamber is positioned above the clamping table and is limited at the top by the adjustable crossbar. The test stand is controlled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical Data: General Data Test Stand: - Total height: 1840 to 2240 mm - Height of machine table: 1030 mm - Width: 800 mm - Depth: 1500 mm - Maximum specimen chamber height: 600 mm (without load cell) - Free column passage: 550 mm - Maximum force amplitude: 10,000 N - Maximum total force: ±20,000 N - Maximum oscillation stroke: ±5 mm - Test frequency: 30 to 110 Hz - Sensor accuracy: at least Class 1 (DIN EN 10002-3) - Weight of test stand: approx. 1,880 kg - Max. weight of clamping device: 150 kg General Data Control Cabinet: - Total height: 1900 mm - Height of desktop: 1080 mm - Width: 650 mm - Depth: 700 mm - Weight: 152 kg - Colour: RAI 9006 (White Aluminium), desktop Midnight Site Requirements: - Required space: 2.5 x 2.5 m - Required ceiling height: 2.8 m - Floor load capacity: 170 N/cm² - Power supply: 400 V / 50 Hz (right-hand phase sequence) - Connection plug: CEE socket, 5-pin, 16 A - Fuse: 16 A Gedpfx Anozii Awe Ejka Connection and Environmental Conditions Network Requirements: - Voltage: 400 V three-phase with neutral conductor and protective earth, right-hand phase sequence - Voltage fluctuation: < ±10% - Short-term dips:

Tilstand: som ny (utstillingsmaskin), Byggeår: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements. Maximum performance in this class. Very quiet operation. Application Clean air extraction units for wood chips and wood dust. Designed for commercial use. Suitable for all woodworking machines with a corresponding extraction nozzle diameter. Can also be used for multiple dust sources. High-quality, well-thought-out construction. Robust and compact housing made of galvanized sheet steel. Extraction nozzle can be easily converted from left to right, allowing flexible use. Large maintenance openings. Large-capacity, mobile chip containers with clamping brackets and collection bag. System delivered fully assembled, ready for immediate use. Mobile design. Filter Description Ultra-compact with maximum filter surface area. Filter material made from polyester fleece, aluminium-coated, washable, and therefore with long service life. Filter supplied as standard in an antistatic version, tested and approved according to Category M-BIA. Filter resistance monitored via a differential pressure switch, adjustable with a warning lamp on the control box. The fan is positioned downstream of the filter. Equipment Details: With innovative locking device for secure container positioning. All units in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with parking brake Pre-assembled for machine recognition connection for up to 8 machines and shutter controls Manual cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Specifications Extraction nozzle diameter: 125 mm Motor power: 2.2 kW Supply voltage: 400 V Frequency: 50 Hz Rated air flow: 1095 m³/h Maximum air flow: [n/a] Vacuum at rated volume: [n/a] Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Gedpfx Anecnw U Do Ejka Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction nozzle to floor: 850 mm Weight: 194 kg Location: Expected in stock 54634 Bitburg

Tilstand: ny, Byggeår: 2025, AL-KO Colour Jet 1 paint mist extraction unit Paint mist extraction unit, ready for operation, 1 m² filter surface with pre-filter and fine filter, connection diameter 300 mm, motor 1.5 kW ex (suitable for installation in Zone 22 according to ATEX), single-stage switch + 5 m cable with plug and Gjdpfx Ansbumr Se Eoka throttle valve. Compact, space-saving sheet steel construction Chassis with wheels Indirect extraction near the floor Fully pre-assembled With connection cable and phase inverter Adjustable side panels Optimised spray mist capture through patented front hood design Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust nozzle with integrated throttle valve Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm, W = 2000 mm with side panels Filter surface: 1 m² Weight: 175 kg

Tilstand: god (brukt), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: - Vibration exciter: 4x LDS V721 air-cooled - Amplifier: PA 1000L - Controller: imv K2 MIMO (Multi Input Multi Output) - Software: imv K2 - Excitation modes: Sine / Random / Shock / Real-time profiles - Force vector per shaker: 2.9 kN (Peak Sine) / 1.9 kN (RMS Random) / 4.6 kN (Peak Shock) - Max payload: 100 kg per shaker - Acceleration: max. 44 g RMS / 66 g Peak - Velocity: max. 0.7 m/s - Stroke amplitude: max. 25.4 mm p-p (1 inch) - Frequency range: 5-4000 Hz - Clamping surface for test specimens: 1000 x 1000 mm aluminium profile frame Special Features: - The four shakers can be operated synchronously or asynchronously with the MIMO controller. - An aluminium profile frame enables a clamping area of 1x1 m² for large test specimens. Gsdpfjzg Tv Nsx An Eska - Without the profile frame, mobile use as a modal shaker for large specimens such as complete vehicles is possible. - The shaker’s lightweight vibrating elements enable excitation frequencies up to 4000 Hz. - Weight: 2000 kg Climatic chamber: - Manufacturer: Andreas Schmid Anlagentechnik GmbH - Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height - Test space: 2,000 x 2,000 x 2,000 (8m³) - External dimensions without base frame: 2,340 x 3,600 x 2,800 - External dimensions with base frame: 2,340 x 3,600 x 3,800 - External dimensions unit: 1,200 x 2,400 x 2,200 - Door: 2,000 x 2,000 - 2 pcs test space windows in door: 460 x 460 - Weight: 4,500 kg - Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 - Outer cladding: 0.6 mm sheet steel, painted RAL 7035 - Temperature range: -55°C to +140°C - Temperature constancy: ± 0.5 K over time - Climate range: +10°C to +95°C - Humidity range: 10% to 95% rH - Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of delivery: (See photo) Sample images! Current photos to follow! (Technical data subject to change and errors excepted!) Further questions can be answered gladly by phone.

Tilstand: brukt, Byggeår: 1995, Perfect binder with endsheet feeder / Kolbus Ratiobinder KM 470 with endsheet feeder, year built 1988/1995 Kolbus Ratiobinder KM470, 23 clamps Format / Size: min. 125 x 100 x 3mm / max. 460 x 310 x 60mm Book block thickness: min. 3mm – max. 60mm Equipment / Consists of: - Gathering machine ZU 803, 32 stations - Left and right operation - Criss-cross delivery - Feeder for endsheet and lining sheet for hardcover production - Manual feed station Ratiobinder KM 470 with 25 clamps - PUR spine gluing unit - Hotmelt spine gluing unit Gkjdpfx Anjn Aw Ukj Esa - PUR, hotmelt and dispersion glue binding - Side gluing unit, hotmelt - Back lining station Book block and pressing station FM 405 for sewn book blocks for hardcover production (Kolbus FM 405) Book block and pressing station FM 405 for sewn book blocks for hardcover production Three knife trimmer Kolbus HD 150 Online video inspection via Skype video We would be very pleased with your visit – more machines in stock Available immediately – inspections possible on site In stock at Emskirchen / Nuremberg – test runs possible

Tilstand: brukt, 1-farges arkoffsettrykkpresse – 1 Color Sheet-Fed Offset Press Heidelberg PM-QM46-1 År 2005 – Serienr. 965406 Arkformat / Min. arkstørrelse: 140 mm × 89 mm – maks. 340 x 460 mm Trykkhastighet / Printing speed: maks. 10.000 ark/t Gedpfx Ajv Ak S Ren Eska Tykkelse / Thickness: 0,04 mm – 0,3 mm Fuktesystem DDS Autoplate Plus-versjon Stripeinnmater – Strip feeder Mediprint STR 4.1 Tørrsprøyter / Dry pollinators Online videoinspeksjon via WhatsApp – MS Zoom – Telegram På lager i Emskirchen/Nürnberg – Umiddelbart tilgjengelig – Kan testes

Tilstand: ny, Byggeår: 2025, SERVICE CENTER HALVER FOR KANTBENDING TECHNOLOGY. Your competent partner for bending machines. We are your point of contact for high-quality sheet metal processing throughout Germany. As a long-standing distributor of the Polish manufacturer PROD-MASZ, we respond directly to the needs of our customers on site and see ourselves as an extension of the production facility. Godpfszmmh Ejx An Eoka Relevant machines can be demonstrated if required, along with expert consultation and professional instruction. We offer tailored advice in line with your requirements and look forward to your enquiry. Bending machine RED2200/0.8 on transport castors with 60mm/45° cut-out from Prod-Masz available for testing on site and immediate collection. Technical specifications: - Working width: 2140 mm - Steel sheet thickness up to 0.8 mm - 30% higher sheet thickness for non-ferrous metals - Bending angle up to 145° - Bending beam: 15 mm - Passage: 80 mm - Degree scale - Adjustable stop for preset bending angles - Sheet metal tray - Front depth stop - Weight: approx. 250 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request All prices are subject to 19% VAT. CE certificate Warranty: 12 months Collection possible Accessories: rotary shear €350 Shipping within Germany €180

Tilstand: ny, Byggeår: 2023, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 221055-1, type innstrømsstrøm: Klimaanlegg, inngangsspenning: 400 V, type kjøling: vann, total bredde: 2 430 mm, total lengde: 12 080 mm, total høyde: 2 880 mm, drivstoff: diesel, totalvekt: 18 000 kg, kontinuerlig tilsynelatende effekt: 770 kVA, kontinuerlig effekt: 616 kW (837,53 hk), rotasjonshastighet (maks.): 1 500 o/min, slagvolum: 16 400 cm³, drivstofftank kapasitet: 9 000 l, tankkapasitet: 9 000 l, effekt: 616 kW (837,53 hk), nominell (tilsynelatende) effekt: 770 kVA, Utstyr: dokumentasjon / manual, rotasjonshastighet trinnløst variabel, EPS-C40 770S - 72h Container Emergency Power Supply System: IMMEDIATELY AVAILABLE!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated Power PRP: 700.0 kVA, 560.0 kW cos phi = 0.8 Rated Power LTP: 770.0 kVA, 616.0 kW cos phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation recirculated into the engine block, fuel system with pre-filter, filter and water separator, intake air filter with vacuum indicator, fuel hoses for connection of feed and return lines with flexible couplings. Electric starter, engine shutdown device and electronically controlled speed governor. Gkedpfx Anjvyp H Uo Eja Rated Power: 596.0 kW Rated Speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 ccm Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous power: 730.0 kVA at 40°C Rated voltage: 400 V Rated frequency: 50 Hz Engine Oil Drain Hand Pump from 700 kVA Hand pump for draining the engine oil pan. Engine Preheater Electric 1000W up to 700 kVA, 1 unit The preheated coolant circulates through the primary engine cooling circuit by convection. Connected to the internal cooling circuit with flexible hoses, equipped with shut-off valves for maintenance. Coolant Circulation Pump guarantees safe engine preheating. Walls and roof made from corrugated sheet steel. Descaling and cleaning of the welded construction by sandblasting. The container is coated inside and out with seawater-resistant primers and paints. 40" HC High Cube Soundproofed Container ISO 1496-1 container for power generators, external dimensions according to ISO 668. Wall and roof panels insulated with self-extinguishing, oil- and water-resistant sound insulation material, clad with glass fleece as well as electro-galvanized and coated perforated sheet cassettes. The exhaust silencer is located in a separate compartment inside the container. Radiant heat is dissipated safely vertically via the cooling air flow from the radiator unit. Air inlet openings integrated into side walls, air outlet on the roof. Exhaust outlet with rain flap to prevent water ingress. One end equipped with double-leaf doors with circumferential sealing, serving as a service access point. Side personnel doors with emergency release and full perimeter sealing provide maintenance access. The silencer and exhaust compartment is also equipped with an access door. System operation from outside. Controls and instruments can be monitored through a viewing window with the panel door closed. Emergency stop switch protected in a recessed compartment. Cabling entry possible from the side or through the container floor. Floor aperture prepared for ring seal gaskets DN 150. 40" Container Drip Tray to WHG Standards Oil-tight welded checker plate floor with perimeter upstand, min. 50 mm And much more.... Special feature: GRID PARALLEL operation possible!!!