Kjøp brukt Ilapak Ensacheuse Verticale Vt500 (236)

Tilstand: ny, Byggeår: 2024, driftstimer: 12 h, Funksjonalitet: fullt funksjonell, total høyde: 60 000 mm, inngangsstrøm: 250 A, trykklufttilkobling: 6,2 stang, inngangsspenning: 380 V, garantiperioden: 24 måneder, Utstyr: dokumentasjon / manual, 1. Bord d’alimentation de matière avec mécanisme à chaîne mobile. Hauteur réglable min 0,8 m, max 1,4 m et entraînement électrique. 3 kW, longueur 4 m. Bjdew U Ugmepfx Airsdf 2. Grand broyeur à rouleaux avec doubles lames, diamètre 1,8 m, profondeur 1,9 m, 380 V, 30 kW. 3. Point de connexion avec verrou pour l’alimentation de matières en vrac vers le broyeur. 4. Turbine de broyeur à marteaux, 380 V, 35 kW. 5. Mélangeur pour matières premières broyées avec trappe d’alimentation réglable. Volume 4,8 m³, 380 V, 2,2 kW. 6. Grand granulateur horizontal avec système de lubrification automatique et lubrification automatique programmable du rotor. Refroidissement supplémentaire des anneaux de granulateur et extraction des fines poussières. Capacité maximale 3 T/h, 380 V, 90 kW. 7. Petit convoyeur à bande mobile. Largeur 38 cm, longueur 2 m, 380 V, 0,5 kW. 8. Grand convoyeur à bande avec vanne de tête. Largeur 38 cm, longueur 6 m, 380 V, 1,5 kW. 9. Refroidisseur de pellets avec cyclone pour collecte des fines et vanne de tête. Capacité max. 3,5 T/h, 380 V, 3 kW. 10. Table vibrante/tamis avec collecteur de refus et doseur à vis. 380 V, 1,5 kW. 11. Long cylindre de tamisage avec maille de criblage. Longueur 3 m, 380 V, 1,5 kW. 12. Convoyeur à bande avec alimentation vers l’ensacheuse. Longueur 4,2 m, 380 V, 0,75 kW. 13. Unité de conditionnement BIG BAG avec balances calibrées, tolérance : +/- 5 g par tonne. 14. Vis sans fin pour alimentation de la matière vers la machine d’emballage automatique en sacs. Longueur 5 m, diamètre 27,5 cm, 380 V, 3 kW. 15. Ensacheuse automatique avec couture des sacs et soudage des sacs PVC. Table de convoyage étiqueteuse automatique également présente. Capacité max. 4,2 T/h, avec compresseur d’air. 16. Transpalette semi-électrique neuf, capacité 3 T.

Tilstand: svært god (brukt), Byggeår: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force on X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table size: 1,000 × 14,000 mm Number of T-slots on the table: 7 T-slot width × spacing (center-to-center): 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between horizontal spindle axis and table surface: 275 mm Bdodpjxdwkfjfx Airef Maximum distance between horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between spindle face and table: 50 mm Maximum distance between spindle face and table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with safety fence: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Electrical network voltage: 50 Hz (3 × 400 V) Total machine power: 100 kVA Main fuses to be installed by the customer outside the machine for 400 V Hydraulic unit weight (without oil): 150 kg

Tilstand: ny, Shaft diameter: 120 mm Roller diameter: 390 mm Motor power: 15 kW Length: 2000 mm Bjdpfx Aey Hymqoirsdf Width: 1650 mm Height: 1900 mm Weight approx.: 4,450 kg Standard equipment • Steel construction • 3 rollers driven by hydraulic motor and planetary gearbox • Horizontal and vertical working positions • Mobile control panel • Hardened standard rollers • Hardened and ground shafts made of high-tensile special steel • Digital displays (2 units) • 3-axis hydraulic lateral guide rollers • Two-speed operating system • Hydraulic components: Duplomatic (Italy) • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Manufactured according to EC safety directives (CE marking) and ISO 9000 certification • Operating manual in English Options: NC unit 7 screen €7,500,-- Capacity Table: No. Profile Type Size Max Min. Set 1 125x25 1200 Standard Rolls 2 200x50 1000 Standard Rolls 3 65x65 750 Standard Rolls 4 Ø80 850 Optional Rolls 5 Ø5”x6.35 1500 Optional Rolls 6 Ø160x4 2800 Optional Rolls 7 120x40x4 1800 Optional Rolls 8 90x5 1800 Optional Rolls 9 120x120x12 1200 Optional Rolls 10 100x100x10 1200 Optional Rolls 11 100x11 800 Standard Rolls 12 100x11 1000 Standard Rolls 13 100x11 800 Optional Rolls 14 UPN 220 1000 Standard Rolls 15 UPN 220 1200 Standard Rolls 16 IPN 220 1000 Standard Rolls 17 HEB 120/HEA 140 1200/1200 Standard Rolls 18 UPN 120 10000 Optional Rolls 19 IPN 160 5000 Optional Rolls 20 HEB 100/HEA 120 1600/4000 Optional Rolls *Note: Standard and optional roller sets as specified.

Byggeår: 2006, Tilstand: brukt, CNC SELCA 4045 - Rotary table: 1200 x 1500 mm - X-axis travel: 2200 mm Bjdpfxjq Nni Sj Airsdf - Y-axis (vertical) travel: 1000 mm - V-axis (drilling) travel: 1000 mm - Z-axis (milling) travel: 360 mm - W-axis (approach) travel: 500 mm - B-axis (table rotation): 360,000° - Maximum drilling capacity: 5 to 40 mm - Maximum tapping capacity: M30 - Milling tool holder: ISO 40 - Axis feed rates X, Y, V, W: 0 to 10,000 mm/min - Spindle motor power for drilling and milling: 9 kW - Weight: 26,000 kg - Drilling spindle speed: 4,200 rpm - Milling spindle speed: 4,500 rpm - Maximum workpiece load in rotation: 12,000 kg - Maximum workpiece load stationary: 18,000 kg - Maximum workpiece diameter in rotation: 2,700 mm - Automatic tool changer for milling: 20 positions - Paper filtration system

Tilstand: Defekt reservedelsbærer (brukt), Byggeår: 1975, Funksjonalitet: ukontrollert, maskin-/kjøretøynummer: 3015, omdreiningstall (min.): 40 o/min, rotasjonshastighet (maks.): 80 o/min, inngangsspenning: 380 V, EISELE VMS2-D045 Cold Circular Saw – Defective / Untested For sale: a used EISELE cold circular saw, model VMS2-D045. The machine is expressly sold as defective or untested. Sale strictly as a parts donor, for hobbyists, or for repair/restoration purposes only. The saw was decommissioned for reasons of safety and age. No warranty on function, accuracy, or occupational safety is provided. The EISELE VMS series is known for being a robust industrial metal cold saw with a solid machine frame and high cutting accuracy. Technical Data Manufacturer: EISELE Model: VMS2-D045 Machine type: Metal cold saw / Vertical circular saw Semi-automatic version Suitable for steel, stainless steel, and profile material Pneumatic vice Coolant system included Multiple blade speeds 3-phase power supply: 400 V Pneumatic saw feed Heavy-duty cast construction Key technical details of the VMS series Saw blade diameter depending on version: approx. 275–315 mm Cutting capacity up to approx. 100 mm round material 2 cutting speeds: approx. 40 / 80 rpm Motor power depending on version: approx. 1.4–3.6 kW Condition Used Explicitly sold as defective Untested condition Ideal for spare parts or as a restoration project Bjdpfxsy Uq U Io Airsdf No warranty No returns Inspection strongly recommended Loading and transport to be arranged by buyer Note Technical specifications according to nameplate or existing configuration. Year of manufacture and accessories as per photos. Sale is made under exclusion of any liability for material defects.

Tilstand: helrenovert (brukt), batterikapasitet: 620 Ah, batterispenning: 48 V, total høyde: 784 mm, total lengde: 1 035 mm, total bredde: 443 mm, Tested forklift battery for your truck – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatik system + Includes end discharge cables & REMA 320 plug (other plug types available upon request) + Capacity: min. 90–100% (C5 capacity report provided upon delivery) + Manufacturing year: 2024 Bjdpfxjy Rnizo Airedf Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and more: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 10 - vertical battery change Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front battery change Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front battery change Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front battery change Linde R 14 N - 1120-00 - vertical battery change Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical battery change Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical battery change Linde V 10 E Linde V 12 E - vertical battery change Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Common battery sizes available on request. Transport possible.

Tilstand: brukt, Byggeår: 2000, Faceplate diameter 3200 mm Swing diameter 3500 mm Turning height 2200 mm Dimensions (L x W x H) 7730 x 6240 x 6700 mm Control type 840 D sl Voltage 3 x 400 V Frequency 50 Hz Speed 0.8 - 40 rpm Max. turning diameter 3500 mm Total power requirement 51 kW Machine weight approx. 86 t Technical Data Machine type: CNC vertical turning lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional Completely overhauled with control retrofit in 2010 Control upgrade in 2016 Control: Siemens 840 D Sl Condition: very good Faceplate Turning diameter of faceplate: 3,200 mm Number of speed stages of faceplate: 3 (infinitely variable) Speed range of faceplate: 0.8 - 40 rpm Stage I: 0.8 – 3 rpm Stage II: 0.8 – 11 rpm Stage III: 0.8 – 40 rpm Workpiece Machining Max. turning diameter: 3,500 mm Max. turning height of workpieces over faceplate: 2,200 mm Vertical Slides Smallest axis distance between vertical slides: 470 mm Max. ram travel of left vertical slide: 985 mm Max. ram travel of right vertical slide: 985 mm Axis feed - stepless feed max.: X1,2 3 m/min max.: z1,2 2.5 m/min Ram not swiveling Crossrail Support Rapid traverse of crossrail: 600 mm/min Max. distance from crossrail to faceplate: 2,300 mm Load Capacities +Permissible turning force when machining workpieces with a turning diameter of 2,000 mm and a cutting speed of 20 m/min: 8,000 kg +Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for all slides: 45 mm² +Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 2.5 mm² +Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for all slides: 120 mm² +Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 22.5 mm² +Maximum permissible workpiece weight at 0.8 - 3.15 rpm: 17,500 kg +Maximum permissible workpiece weight at 4 - 40 rpm: 7,500 kg Electric Motors Power and speed of main drive motor: 51 kW Bdedpfeuddcgex Airof Power of feed motors for: - Vertical slide crossbeam (2 units): 16 Nm (gear ratio 1:10) - Ram (2 units): 16 Nm (gear ratio 1:12) Power and speed of drive motor for hydraulic pumps (2 units): 3 kW - 1,500 rpm Power and speed of clamping hydraulic motor for vertical slide crossbeam: 1.5 kW - 1,500 rpm Power and speed for crossrail adjustment: 15 kW – 1,500 rpm 3.5 Details regarding compressed air supply and other consumables Compressed air connection: 6 bar, free from oil and water 3.6 Energy consumption and conditions Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Protection: 315 A Main dimensions and weight of machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto 60 interface Non-driven Front plate Turning diameter of front plate: 3,200 mm Clamping plate diameter: 3,400 mm Number of rotation stages of front plate: 3 (steplessly adjustable) Speed ranges of the front plate...

Tilstand: verkstedoverhalt (brukt), Byggeår: 1998, maskin-/kjøretøynummer: M000039046, boredybde: 180 mm, høydereguleringstype: mekanisk, bordbredde: 315 mm, bordlengde: 565 mm, borchuckstørrelse: 20 mm, totalvekt: 260 kg, rotasjonshastighet (maks.): 2 840 o/min, effekt: 1,5 kW (2,04 hk), arbeidshøyde: 850 mm, MAKA slot drilling machine LB-1 Stable, heavy cast iron work tables and supports in combination with a large-surface machine base guarantee smooth and quiet operation. Height and depth adjustments are monitored via measurement scales, and the extremely smooth single-lever adjustment using ball guides ensures fatigue-free work. Technical data: Table size: 565x315 mm Work table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Bodpfjyc Rz Aox Airsdf Vertical adjustment of drill head: 140/160 mm Two-jaw drill chuck: 0-20 mm Speed: 2,850 rpm Motor power: 1.5 kW Extraction port diameter: 90 mm Net weight: 60 kg Sound level according to DIN-45635/1600: 66.9 dB The machine is in excellent technical and visual condition and has been tested in our workshop. It is equipped with a dowel hole drilling device (16-22-25-32 mm) and a precision mitre fence 45°- 0 -45°. Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Tilstand: brukt, Consisting of: “Ishida” Multihead Weigher Model: CCW-M-214W-S/50-SS Heads: 14 units Performance: up to 2 x 30 weighings/min Filling Weight (Max. Weight): 10,000 g Accuracy: Mean value 0 to +3.0 g Weighing Range: 5 - 10,000 g Max. Volume: 12,500 cc (per single weighing) Minimum Graduation: 1 g Display: Touch-Screen Display Power Supply: 230V, 50Hz Connected Load: 1.6 kW In good condition + Vertical Form Fill Seal Machine (Flowpack) “Rovema” Model: VPK360 - 14115 Mechanical Output (cycles/min): 120 Roll Width / Roll Diameter (max.) (mm): 770/450 (770/600 with front rollers) Bag Width (min. – max.) (mm): 80-360 Bag Length (min. – max.) (mm): 200-600 Filling Volume (max.) (cm³): 12,000 Sealing Pressure (max.) (N): 6,000 (optional: 8,000) Program Memory: Standard: 100 (optional: 1,000) Dimensions (L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains Connection (Volts): 230 / 400 Power Requirement (kVA): 8 Protection Class: IP54 Compressed Air Connection: 6 bar Air Consumption 6 bar (NL/cycle): 0.25 Machine Color: RAL 9007L / Grey Aluminium Operating Temperature (min. – max.) (°C): +5 … +45 Storage Temperature (min. – max.) (°C): –30 … +60 Humidity (max.) (%): 15…95; No condensation In good condition + Vertical Form Fill Seal Machine (Flowpack) “Rovema” Model: VPK360 - 14116 Mechanical Output (cycles/min): 120 Roll Width / Roll Diameter (max.) (mm): 770/450 (770/600 with front rollers) Bag Width (min. – max.) (mm): 80-360 Bag Length (min. – max.) (mm): 200-600 Filling Volume (max.) (cm³): 12,000 Sealing Pressure (max.) (N): 6,000 (optional: 8,000) Program Memory: Standard: 100 (optional: 1,000) Dimensions (L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains Connection (Volts): 230 / 400 Power Requirement (kVA): 8 Protection Class: IP54 Compressed Air Connection: 6 bar Air Consumption 6 bar (NL/cycle): 0.25 Machine Color: RAL 9007L / Grey Aluminium Operating Temperature (min. – max.) (°C): +5 … +45 Storage Temperature (min. – max.) (°C): –30 … +60 Humidity (max.) (%): 15…95; No condensation In good condition + Carton Erector – Packaging Machine “Paal” Model: ELLE 3000 S Operating Performance: Max. 14 cycles / minute Bdsdpfxjyqxxxj Airef Infeed Rate: Max. 34 bags / minute Format1: Tray with lid Product Description: Stand-up pouch 4.0 kg Product Dimensions: approx. 240 x 105 x 370 mm Product Weight: 4.0 kg Grouping Scheme: 1 x 3 upright Type of Packaging: Tray with internal glued lid and lid lock Dimensions: Product Infeed Height: 650 mm Package Discharge Height: 500 mm Installation Area: approx. 8,000 x 6,500 mm For main dimensions please refer to the installation plan (photo in attachment) 3 x 400V, 50Hz, 5kW Packaging Machine: Model: Elematic 3000 LS/335 In good condition

Tilstand: nesten som ny (brukt), Byggeår: 2018, Type: Vertical cutting machine for foam and similar materials Manufacturer: Albrecht Bäumer Model: IS/M-3 Year of manufacture: 2018 Dimensions: Bsdper H D Tusfx Airsdf - Table left of blade: 2500 mm - Table right of blade: 2200 mm - Cutting length: 2500 mm - Cutting height: 1300 mm - Side stop right: 1200 mm - Side stop left: 1200 mm (foldable) - Powered grinding unit - Height-adjustable blade guide - Pneumatic blade tensioning Info: Lightly used ISM-3 vertical cutting machine by Bäumer. Easy to operate and a highly reliable machine equipped with state-of-the-art technology. The machine is equipped with B-Con (enables remote maintenance by the manufacturer via the internet). The machine is still in operation and can be inspected by appointment. Immediately available. Dismantling and transport to be organized by the buyer. Location: North Rhine-Westphalia, Lippe district. Further information on request (written inquiries only).

Byggeår: 1964, Tilstand: god (brukt), Diskus Werke DSH 600/1000 side surface grinding machine This machine type is a grinder with a motor-driven grinding spindle. Clamping and grinding of the workpieces is performed with clamping devices tailored to the specific operation. The fixtures are mounted to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing, and oscillation slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Coolant: Isocool 1020 BF Coolant volume: 400 litres Bodpfxehtyudo Airedf Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving racks, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools. Financing through our partner bank is also available. For complete solutions visit komplett-konzept.leasingo.de More items – new and used – available in our shop! International shipping costs on request!

Tilstand: god (brukt), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Maximum efficiency The best-known unit from REZNOR is the UDSA gas-fired warm air heater, designed to ensure even air distribution in industrial halls. This recirculating unit is easy to install, available in 14 output sizes from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. Combustion air can be supplied either from outside or from the room, as standard. The UDSA warm air heater from REZNOR ensures uniform air distribution within the heated hall. Its patented heat exchanger sets new benchmarks in flow dynamics and heat transfer, delivering an efficiency of over 92%. UDSA: compact, revolutionary, and forward-looking. With this generation of devices, halls can be heated particularly efficiently and directly – that is, without a central heating system – using decentralised, modulating gas-fired warm air heaters. REZNOR UDSA Gas Warm Air Heater. The benefits: - Efficiency greater than 92% - Also suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, B and C versions - Compact design for easy installation - Uniform heat distribution - Vertical and horizontal air guide louvres as standard - Heating output modulated down to 50% - EC technology - ErP Ready These units are directly fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. Bodpfxex Ihiis Airjdf Installation of the gas heater and its gas and flue connections must be performed by a certified installation company. These gas warm air heaters are suitable for: - Operation with natural gas or LPG - Recirculating air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Single-stage or two-stage heating operation*, controlled via room thermostat and heating switch - Ventilation° controlled via ECOtronic TN-L° with day-night-week program - Flue discharge via roof (version B or C) - Flue discharge through external wall (version C) Gas Warm Air Heater Model: UDSA015-4 Gas Appliance Type: B22P-C12-C32-C52-C62-C82 Designation: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nozzle Pressure: 7.80 mbar Max. Nominal Heat Input (Hs) QN: 17.60 kW Max. Nominal Heat Input (Hi) QN: 15.86 kW Max. Nominal Heat Output: 14.59 kW Min. Nominal Heat Output: Power supply: 230V 1N ,50Hz Air volume flow: 1,360 m3/h Protection class: IP20 Find more new and used items in our shop! International shipping costs on request!

Tilstand: ny, Bore capacity in steel (diameter): 50 mm Throat depth: 360 mm Drilling stroke: 150 mm Spindle speeds: 120 - 3000 rpm Spindle taper: SK 40 Table traverse (cross): 650 mm Table traverse (longitudinal): 320 mm Vertical adjustment: 500 mm Clamping surface (table): 1000 x 300 mm Supply voltage: 400 V Maximum milling cutter diameter: 80 mm Total power requirement: 2.2 kW Machine weight approx.: 0.85 t Space requirement approx.: 1.25 x 1.5 x 2.3 m Bjdsfg U S Uopfx Airsdf New model industrial drilling and milling machine with gear transmission and wide speed range. The prism guide in the Z-axis ensures high precision even during the heaviest milling tasks. Equipment/features: • Automatic feed on X-axis • 3-axis digital display • Motorized Z-axis • Quill feed • Left/right rotation • Thread cutting device • Swiveling gear head • Coolant system

Tilstand: ny, Solid round material 30 / 900 mm Solid square material 30 / 900 mm Angle steel 35x35x5 / 600 mm T-bar steel – web outward 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Bdodpeq Adtqefx Airef Roller diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Electric profile bending machine - Optional horizontal or vertical operation - 1 set of hardened standard rollers - Lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7 mm / 1" - Operating manual - Footswitch for left/right operation and EMERGENCY STOP

Tilstand: svært god (brukt), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feeder Plain text display Press force monitoring Wire straightening device Bosch wire stripping machines Holder and brush motor with mounted tool W32/1-32 Soundproof cabin Barrel of copper wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Feed lengthwise: 250 mm Strip width lengthwise: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrics (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You purchase the machine as shown in the pictures. Complete factory closure, Bdsdpfxsg T S Tde Airsf large selection of mezzanine floors, pallet racks, shelving racks, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools Financing through our bank is possible. komplett-konzept.leasingo.de Further stamping and bending machines—new and used—can be found in our shop! International shipping costs on request!

Tilstand: brukt, Byggeår: 1982, Plate width: 480 mm Plate thickness: 3 mm Stations: 13 Machine weight: approx. 11 t Required floor space: approx. 15 x 2 m Number of stations: 13 Number of straightening stations: 1 Shaft diameter: 60 mm Horizontal shaft distance: 310 mm Bsdsyqtx Hspfx Airedf Vertical shaft distance: 110–250 mm Speed: approx. 11 m/min Connected load: approx. 20 kW Uncoiler (without drive): - Coil inner diameter: 508/610 mm - Coil weight: 3 t Flying hydraulic shear Roll set for hat profile The technical data are based on manufacturer/operator information and are therefore non-binding for us. Prior sale reserved; exclusively our terms and conditions of business and sale apply. About us - More than 400 machines in stock - Over 15,000 m² storage area, crane capacity 70 t - More than 10,000 accessory items for your workshop If you wish to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Inspections possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Tilstand: god (brukt), 2000 pieces ROLL CAGES AS NEW Total height: 155 cm Item no.: RW-2155N_2000 Please note the minimum purchase quantities / tiered pricing!! This offer is directed exclusively at government agencies, public sector customers, and commercial enterprises! Private enquiries are not accepted. Bdodpfxeikqy Hs Airsf NEW ROLLING BASES in black color and side grids pre-owned Roll containers, roll cages, furniture gliders, food roll containers, rollies, roll containers, roll cages for yellow sacks, firewood trolleys, firewood roll containers, workshop shelves, tire roll racks, rolling racks, suitable for intermediate shelves, suitable for film covers, Roll cages are also perfect as furniture gliders, plant roll containers, technical roll containers, mesh roll containers Standard crates such as baker's boxes, bread baskets fit just as well on this roll cage as butcher's crates, E2 crates DESCRIPTION: - Plastic roll base type 724x815 mm - With 2 reinforcing irons - With wheels, diameter 108 mm, polypropylene - 2 swivel castors - 2 fixed castors - Steel construction pipe diameter for frames: Ø 22 mm - Load capacity: 500.00 kg Color: - Rolling base black, - Wheels white; - Side grids pre-owned, assorted colors - 2 side grids - Usable height 1350 to 1650 mm Construction: - 4 x vertical flat irons 12 x 3 mm - 2 x horizontal flat irons 12 x 3 mm - 1 x cross pipe Ø 16 mm - Surface finish: gentian blue, similar to RAL 5010, powder-coated Roll base and upper structure also available in: - green RAL 6024 and - red RAL 3000 Price information per unit, net Prices for purchase of 2,000 units: €49 per unit Prices for purchase of 1,000 units: €45 per unit Prices for purchase of 300 units: €54 per unit Prices for purchase of 100 units: €59 per unit If you have further questions, please contact us and provide your phone number. Collection by appointment from warehouse 47441 Moers If you require shipping, please inquire to discuss dismantling and shipping costs We also offer: Intermediate shelves (new or used, good condition) // tension rubber straps (new or used, good condition) // used roll cages in various qualities and dimensions Sample photos

Tilstand: ny, sagbladets diameter: 303 mm, skjærelengde (maks.): 5 300 mm, skjæredybde: 80 mm, uttrekksdyse diameter: 140 mm, Utstyr: doseringsanlegg, Striebig Control18 6224 Bdedpeu Nhbyjfx Airof Cutting area: 6224 L: 5300 x H (vertical): 2240 / H (horizontal): 2100 x D: 80 mm Saw Frame • Machine manufactured with precision components to 1/100 mm accuracy • Solid, self-supporting, fully welded, torsion-resistant saw frame • TRK1 continuous support wall made from birch multiplex with integrated small parts rest • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic middle support detection • Automatic roller locking during cutting process Saw Beam • Robust, durable steel construction • Automatic beam locking with cutting position recognition Saw Unit • Play-free, smooth-running guides • Sturdy mounting of the motor carriage for high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Greater convenience thanks to largely automated operation • Laser-assisted display of horizontal cut • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch to manual operation • SUPERSILENT sound insulation reduces saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12” touchscreen computer with optimized user navigation • Multilingual operator interface • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic sawing process • Stepless feed speed selection 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connectivity • 24VDC UPS for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Measurement Setting • Digital Measurement System DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winning (including Swiss Design Award) • Functional and operator-friendly ergonomics Installation • Wall-mount or free-standing installation possible - Scoring saw unit VSA (scorer blade infinitely adjustable) - Paper holder - Complete small parts support, aluminium (2 pcs.) - Striebig cutting optimization STRIEBIG ExpertCut CON

Tilstand: brukt, For sale is a used vertical machining center EMCO VMC 300. Specification / Data: Manufacturer: EMCO Model: VMC 300 Year of construction: approx. 1990 Control: Siemens Sinumerik / 810M Travel paths: approx. X 420 / Y 330 / Z 400–450 mm Tool holder: SK40 Tool changer: 12-position Table size on comparable machines: approx. 850 x 325 mm Spindle speed on comparable machines: up to 5,000 rpm Machine weight on comparable machines: approx. 2,900 kg Storage contents with various machine accessories are available and can be taken over by arrangement. Comparable VMC-300 listings quote a 12-position tool changer, SK40, table 850 x 325 mm, 5,000 rpm, and approx. 2,900 kg. Bdodpjy D Ut Hjfx Airjf Condition: Used, commensurate with age. Visual condition as per photos. Functional status: [Machine was operational until removal / tested under power] Sale therefore preferably to knowledgeable buyers. Scope of delivery: EMCO VMC 300 Siemens control 12-position tool changer Various accessories / contents of shelves by arrangement Note: Inspection possible by appointment. Loading/collection by arrangement. Sale preferably to business customers.

Byggeår: 2010, Tilstand: klar til bruk (brukt), Bore capacity steel/cast iron: 25mm/32mm, thread cutting capacity steel/cast iron: M20/M24, tool holder: MT4, spindle speed: 3500 rpm, feed rate: 1050 mm/min, arm reach: 420mm-1320mm, arm travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6 kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. Inspection onsite possible. Bdedpsu N Hdasfx Airsf

Tilstand: brukt, Byggeår: 2006, Spindeldiameter 225 mm X-axis travel 8000 mm Y-axis travel 5600 mm Z-axis travel 2100 mm W-axis travel 1400 mm Spindle speeds - infinitely variable 0–650 rpm Spindle taper ISO 60 Feed rate, stepless 5–3000 mm/min Rapid traverse 5 m/min Machine weight approx. 150 t Space requirement approx. 12 x 5 x 8 m Total power requirement 120 kW The facing and boring mill was overhauled and modernised in 2006. Original year of manufacture: 1972. Control: Siemens 840 C We supply the machine with tools and holders, as well as a vertical milling head. The technical data are based on manufacturer or operator information and are therefore non-binding for us. Prior sale excepted; exclusively our general terms and conditions of sale apply. About us: Bjdpfxeyqtgko Airjdf More than 400 own machines in stock Over 15,000 m² storage area, crane capacity 70 t More than 10,000 accessory items for your workshop If you would like to sell machines, production lines or your company, please contact us. Further offers can be found on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Tilstand: ny, Funksjonalitet: fullt funksjonell, The V9 height measuring instrument has been developed for the most demanding users. Laboratories and workshops, for which measurement reliability is essential, will appreciate its exceptional precision and "Swiss Made" craftsmanship. Metrological performance was at the forefront in the development of this height gauge. No compromises were made in terms of accuracy and repeatability. For this reason, certain construction details—particularly the probe—differ from other models. The display, which is based on a fully tactile interface, offers user-friendliness that is previously unmatched in vertical measuring instruments. The displayed menus and functions adhere to a very strict philosophy and design. This enables high efficiency, even for complex tasks such as programming, 2D mode, angle measurements, or statistical analysis of results. The V9 models feature a revolutionary displacement handwheel, allowing the user to select either manual or motorized displacement modes. Measuring ranges: 400 to 1100 mm Exceptional precision level Electronically adjustable measuring force Manual or motorized movement 2D, programming, statistics Wide range of accessories available All adjustments possible without tools RS232 and USB interfaces Wireless data transmission (optional) Model V9 – 400 Measuring range (mm): 406 Measuring range with extension (mm): 724 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Deviation of frontal squareness (μm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 Model V9 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Deviation of frontal squareness (μm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24 Model V9 – 1100 Bdodpfx Aiow R Nv Ierjf Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Deviation of frontal squareness (μm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 33

Tilstand: ny, Funksjonalitet: fullt funksjonell, The V5 height measuring instrument is the successor to the legendary V+ series, of which thousands of units have already been sold to workshops around the world and which is renowned for its simple operation and high quality. Trimos was the first company to introduce vertical measuring instruments to the market more than 50 years ago. The V5 models embody the consolidation of the expertise accumulated over the years. The highly readable display and user-friendly functions ensure exceptional ease of use. But that's not all: the V5 is equipped with a revolutionary displacement handwheel that allows the user to choose whether to move the measuring carriage manually or by motor. Each mode is uncompromising—users preferring manual instruments will not notice a difference compared to classic manual equipment, and the same applies to motorized movement. This innovation eliminates a difficult purchasing decision and allows multiple potential users to operate the same device efficiently. The V5 design, featuring lateral probe holders, revives an old Trimos tradition: they allow measurements with long, robust probes that guarantee excellent repeatability. Measuring ranges: 400, 700, and 1100 mm Extremely easy to use Electronically adjustable measuring force Manual or motorized operation Standard probes up to 400 mm Comprehensive range of accessories All settings adjustable without tools RS232 and USB interfaces Wireless data transmission (optional) Models V5: V5 – 400 Measuring range (mm): 407 Measuring range with extension (mm): 719 Accuracy (µm): 2.5 + L(mm)/400 Repeatability (µm): 2 Deviation of frontal perpendicularity (µm): 5 Resolution (mm): 0.0005 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 Models V5: V5 – 700 Measuring range (mm): 711 Measuring range with extension (mm): 1023 Accuracy (µm): 2.5 + L(mm)/400 Repeatability (µm): 2 Deviation of frontal perpendicularity (µm): 8 Resolution (mm): 0.0005 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24 Models V5: V5 – 1100 Measuring range (mm): 1110 Measuring range with extension (mm): 1422 Accuracy (µm): 2.5 + L(mm)/400 Repeatability (µm): 2 Deviation of frontal perpendicularity (µm): 11 Resolution (mm): 0.0005 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 33 Bdsdpfx Aew R Nt Tsiref

Tilstand: brukt, AUTOMATIC STRAPPING STATION SIGNODE, model M400 The formed package is automatically transferred by the powered rollers of the discharge carriage to the automatic system. It will stop at the programmed strapping positions to allow for the automatic application of the steel straps. It consists of: - SIGNODE automatic strapping machine, model M400/PA/TSM for vertical strapping - Pneumatic floating strapping head for steel strap, 32 mm wide (1¼") and 0.9 mm wall thickness - 450 kg strap dispenser with electric decoiler - Control panel SIGNODE Automatic Strapping Machine: Model M400/PA/TSM for vertical strapping Pneumatic Floating Strapping Head: for steel strap, 32 mm wide (1¼") and 0.9 mm wall thickness 450 kg Strap Dispenser: with electric decoiler Control panel: Included Bjdpowxxz Rjfx Airjdf

Tilstand: ny, Bernardo BF 45 HSV Bore and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat depth: 280 mm Spindle speed (12 steps): 75 – 3200 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed (3 steps): 0.10 / 0.18 / 0.26 mm/rev Table size: 730 x 210 mm T-slot size: 14 mm Max. distance spindle/table: 640 mm Max. distance spindle/base plate: 1190 mm Travel (X / Y): 495 / 200 mm Bdedegd H Uxopfx Airsf Swiveling head: -90° to +90° Head vertical travel: 260 mm Column diameter: 115 mm Base working area: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Weight approx.: 362 kg Scope of Delivery • Quick-action drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Drawbar M 16 • Reducing sleeve MT 4 / 3 • Combination stub milling arbor MT 4 / 27 mm • Automatic quill feed • Height-adjustable safety guard • Digital quill stroke display • Tapping device • Coolant system • LED machine lamp • Longitudinal scale • Operating tools