Sentrals dreiebenk

Weiler Primus

Tilstand: svært god (brukt), Byggeår: 2017, Weiler Primus VCD (2017) presisjonsdreiebenk Produsent: Weiler Type: Primus VCD presisjonsdreiebenk Årsmodell: 2017 Dcodjx Nkdxopfx Abhjb Tilstand: Brukt, meget god, som ny, nylig vedlikeholdt i henhold til fabrikkspesifikasjoner med overtakelsesprotokoll Leveringsomfang: - Dokumentasjon

Tilstand: klar til bruk (brukt), Byggeår: 1989, Funksjonalitet: fullt funksjonell, Til salgs er en dreiebenk av merket Weiler, modell Primus LZ-GS. Maskinen er i svært god stand. Tekniske data: Dedpfx Abjihig Ijhecb Produksjonsår: 1989 Maskinnummer: 4443 Driftsspenning: 380 V Senterhøyde: 120 mm Spissavstand: 430 mm Turtall: 60 - 3000 o/min i 18 girtrinn Spindelgjennomgang: 23 mm Kortkonisk spindelhode DIN 55027 Bakdokk: MK 2 Mating: 0,03 til 0,15 mm/omdreining Mulige gjengemetriske: metrisk, tomme, modul og diametral pitch Metrisk gjengestigning: 0,25 til 2,5 mm Lengde: 1,2 m, høyde: 1,3 m, dybde: 0,65 m Prisene er eksklusiv merverdiavgift. Besiktigelse mulig etter avtale. Ta kontakt med oss – vårt team hjelper deg gjerne videre. Inbytte eller bytte er mulig! Maskin inn-/utkjøp KJØP / SALG AV PRODUKSJONS- OG METALLBEARBEIDINGSMASKINER M.M. Trenger du en kvalitetsrik, men rimelig metallbearbeidingsmaskin til din produksjon? Eller ønsker du å selge din? For mer informasjon eller kontaktmuligheter, besøk gjerne vår nettside.

Tilstand: god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 5088, spindelboring: 25 mm, spindelhastighet (maks.): 3 000 o/min, spindelhastighet (min.): 60 o/min, total høyde: 1 300 mm, total lengde: 1 200 mm, total bredde: 800 mm, totalvekt: 700 kg, WEILER PRIMUS GS lede- og trekkspindeldreiebenk - Driftsspenning: 380 V - Styringsspenning: 220 V - Tilkoblingseffekt: 2 kW - Nominell strøm: 4,1 A - Frekvens: 50 Hz - Senteravstand: 450 mm - Senterhøyde over bed: 130 mm - Dreiemaksimum over bed: 260 mm - Senterhøyde over slede: 70 mm - Dreiemaksimum over slede: 140 mm Maskinen er utstyrt med bakdokk, Multifix verktøyholder samt 3-bakks chuck fra RÖHM, diameter: 120 mm, inkludert tilhørende verkstedskap med passende tilbehør. Dodpfox Ekm Eex Abhscb Dette er en enhet fra et opplæringsverksted. FCA D-73235 Weilheim Teck, lastet på lastebil.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Dreiebenk Weiler Primus i topp stand. Kan besiktiges under strøm. Tekniske data: Senteravstand: 450 mm Senterhøyde: 120 mm Spindelboring: 23 mm Turtall: 30 – 3000 o/min Pinoldokk: MK 2 Motoreffekt: 1,5 kW Dcedpfx Aex Htf Hobhob Vekt: 350 kg Mål: 1200 x 650 x 1550 mm

Tilstand: god (brukt), Spissavstand: 450 mm Spisshøyde: 120 mm Djdpfx Asw I A Uxebhecb Spindelboring: 23 mm Turtall: 40 – 3000 o/min Trinnløs drift med 3 girtrinn og digitalt turtallsdisplay Bakdokke: MK 2 Driftseffekt: 1,5 kW Vekt: 350 kg Mål: 1200 x 650 x 1330 mm Lakkering: Resedagrønn RAL 6011 Digitalt display: På forespørsel mot pristillegg Tilbehør: Ytterligere tilbehør på forespørsel

Tilstand: brukt, Byggeår: 1999, Funksjonalitet: fullt funksjonell, Weiler Primus VC dreiebenk, årsmodell 1999, med 3-aksers Siemens digitaldisplay, trebakks chuck, Multifix, bakre sprutbeskyttelse og elektrisk chuckbeskyttelse. Maskinen er i god, driftsklar stand og kan demonstreres under strøm etter avtale. Dcodpfx Aex Afvgebheb

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Dsdpfx Asu Aftgsbhjcb Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gearbox steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 160mm three-jaw chuck with 1 set of jaws >> 1 new 125mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very operator-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and verify its condition yourself.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps Dcodpfjvtp Edsx Abhsb >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix quick-change tool post size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly, and it is possible to produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus GS Lead and Feed Screw Lathe, 3-Axis Digital Readout Easson ES8 From training workshop – Excellent condition! Technical Data: - Year of manufacture: approx. 1990 Machine No. 3768 - Center height: 120 mm - Distance between centers: 430 mm - Spindle speed: 60 – 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose, DIN 4 - Tailstock: MT2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: - 3-axis digital readout by Easson ES8 - Collet chuck system 1 to 20 mm, collets in 1 mm increments, with mounting and draw tube - 1 pc. 3-jaw chuck with 2 sets of jaws Dcsdpfxovkfhps Abhsb - 1 pc. 4-jaw chuck with 2 sets of jaws - Multifix toolpost Size A with 3 tool holders - Bed stop - Faceplate turning device About the machine: For sale is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. The slides move smoothly and evenly, and the bed guides are in excellent condition. The Weiler runs quietly even at high speeds. The machine comes from the training workshop of a large company. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-quality surface finishes. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Dsdpfxsvivmye Abhscb Technical Data: >> Year of manufacture: approx. 1990 Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck, NEW, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Collet chuck, new, with collets from 3 to 26 mm in 1 mm increments, new About the machine: A Weiler Primus lead and feed screw lathe is being offered in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed guides are in very good condition. The Primus was in use at a training center. This newer generation of Weiler lathes is very user-friendly and enables the production of surfaces similar to grinding. Take the opportunity to inspect this machine under power on site and see its condition for yourself.