1996 Uniconfort CMT/F 45 varmtvannsaggregat drevet av flis / ved

Uniconfort CMT/F 45

Tilstand: brukt, Byggeår: 2019, MAKSIMAL KAN FLISHØYDE 250 MM Gbsdpfxsyffi Tj Angsp MOTORYTELSE 75 kW BREDDE PÅ FLISHUGGERTROMMEL 640 MM DIAMETER PÅ FLISHUGGERRULLE 660 MM BREDDE ØVRE RULLE 640 MM MAKSIMAL ÅPNING ØVRE RULLE 600 MM ANTALL KNIVER PÅ MASKINEN: 3 ANTALL MATERULLER: 2

Tilstand: brukt, Nr. 3176 Planing and Moulding Machine WEINIG Hydromat 1000 Used, year of manufacture 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished lamella width 4 - 15 mm Max. number of lamellas: 16 pieces Lamella lengths 400 - 4000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool diameter 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swivellable, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter 112 - 250 mm Max. profiling depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Reduced axial adjustment to 25 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm Split pressure shoe in front of upper spindle, adjustable and swivellable, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter 45 mm Tool diameter 112 - 250 mm Max. sawing depth 35 mm Axial adjustment 45 mm All profile spindles with high-performance bearings Electronic feed 7.5 kW Axial adjustment of feed rollers next to left spindle, 35 mm Shortened roller spacing on the right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, pendulum shafts extended to 200 mm 2 driven, serrated rollers in outfeed table 2 driven, serrated rollers in machine table Pressure beam before and discharge after upper spindle with mechanical digital display DigiSet (digital dual display) for left and upper spindles Electric height adjustment for the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and assembly Subject to errors in description and price reserve Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. The following applies: "purchased as inspected" Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location Gbjdpfx Aou Agh Sjngsp

Tilstand: klar til bruk (brukt), Byggeår: 2006, Funksjonalitet: fullt funksjonell, 1 stk. brukt hurtigdampproduksjonsanlegg ----- Produsent : CERTUSS Gbsdpfx Aowra S Rsngjp Modell : Junior Kapasitet : 600 kg/t Maks. varmeeffekt : 436 kW Driftstrykk : 16 bar Vanninnhold : 42,5 l Prøvetrykk : 57 bar CE-merke : CE 0035 Årsmodell : 2006 Utstyrt med Certuss gassbrenner, gassreguleringsseksjon, styreskap montert på kjellegemet, matevannspumpe og eksisterende grove og fine armaturer.

Tilstand: klar til bruk (brukt), Byggeår: 1981, WEINIG Hydromat H25R, S/N 2603-624, årsmodell 1981 med gåbar støydempingskabin KASCHWIG – NESTEN NY fra 2017 • Kort innmatingsbord med tung 6-rulls innmating 1. spindel nedenfor 11,0 kW 2. spindel høyre 11,0 kW 3. spindel venstre 11,0 kW 4. spindel ovenfor 15,0 kW Gbsdpfx Astkt Tpjngep 5. spindel nedenfor 11,0 kW 6. spindel nedenfor 11,0 kW • Hydraulisk mateverk 6–60 m/min. • Mateverk-motor 22,0 kW • 4 drevne bordruller • Spindeldiameter 50 mm • Automatisk bordsmiøring • Spindel 1 + 4 + 5 + 6 med motlager • Spindel 1 + 4 med rettjustering • Tilleggsruller 170 mm • 4 stk. hydrohøvlehoder 150 mm • 6 stk. hydrohøvlehoder 250 mm • Avsugskappe over maskinen

Tilstand: nesten som ny (brukt), Byggeår: 2023, driftstimer: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge air and water cooler Electronic direct injection / common rail Extended idle control with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals upper carriage Maintenance flaps, gas-spring operated with closing assist Automatic central lubrication system, grease reservoir refillable from ground level Rearview camera Side camera LED lighting package equipment LED lighting package for cab Dozer blade on oscillating axle side, width 3m, Gbjdpoyh A Iiofx Angjp with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit braking system Powershift transmission Twin pneumatic tyres, without spacer rings 10.00-20 16PR (Trelleborg T900) Wireless tyre pressure monitoring Automatic oscillating axle lock Front and roof guard for timber handling machines Rigid cab system (viewing height 4.00m) Cab privacy glazing (side, rear window) Single-pane safety glass Sliding window in cab door Clear glass roof window Windscreen washer system (front window) Low-frequency suspended comfort driver’s seat including seat heating and seat ventilation with synchronised armrests / joysticks Joystick steering Automatic climate control Multifunction display Document holder Reach at stick pin 13m at grab tip 10.7m Close-range extension for loading stick Level monitoring for coolant and hydraulic oil Filter system for attachments Load holding valves boom cylinder Load holding valves stick cylinder Basic overload warning device Quick release coupling on loading stick Timber grab on request 1 or 1.25 m³

Tilstand: ny, Byggeår: 2024, Funksjonalitet: fullt funksjonell, Tørkesystem – 1T 184 TPR modell (flyttbar med transportbånd) Vi tilbyr et høykvalitets tørkesystem, ideelt for tørking av treflis, avlinger, resirkulerbart avfall og råvarer til næringsmiddelindustrien. Gsdpfxsua D U Is Angobp Tørkesystemet er helt nytt, i originalemballasjen.

Tilstand: nesten som ny (brukt), Byggeår: 2024, Pelletanlegg – komplett linje – fullautomatisert Salmatec presse Rematec hammermølle Båndtørker VAI posemaskin Kjøler Sikt Palleteringsmaskin Gbjdpfx Anjzg Eudogep Under 1000 driftstimer – sertifisert Mulighet for reinstallasjon på stedet Mulighet for opplæring av operatører på stedet

Tilstand: svært god (brukt), Fire-sidig høvel Weinig Hydromat 23C Gbedoxlcufjpfx Angsp Arbeidsbredde: 230 mm Arbeidshøyde: 160 mm Antall spindler: 7 Spindeloppsett: 1. Bunn 15 kW 2. Høyre 7,5 kW 3. Venstre 7,5 kW 4. Topp 15 kW 5. Bunn 30 kW (multikappsag) 6. Bunn 7,5 kW (hydrostøtte) 7. Topp 7,5 kW (hydrostøtte) Spindelhastighet: 6 000 o/min Spindeldiameter: 50 mm 4 trekkvalser i arbeidsbordet Matehastighet reguleres med frekvensomformer, opptil 36 m/min Innmating drevet med kardangaksel Pneumatiske pressvalser Teknisk dokumentasjon

Tilstand: god (brukt), Byggeår: 2008, Funksjonalitet: fullt funksjonell, Produksjonslinje produsert av det kanadiske selskapet Brunette, som kan beskrives som meget kraftig og slitesterk. Tilbudet inkluderer en stokkavbarker med matebord, barktransportører, samt en flishugger med 630 kW installert effekt og en dobbelt skrueutmatingsskonveyor. Gbsdpfxsvu D Dws Angop

Tilstand: klar til bruk (brukt), Byggeår: 2009, Tre like dampgeneratorer fra Certuss er tilgjengelig. Produksjonsår: 2008/2009/2010, dampeffekt: 600 kg/t, trykkbeholdervolum: 42,9 l, innstillings trykk: 10 bar, testtrykk: 57 bar. Maskindimensjoner L/B/H: 1650 mm/900 mm/2000 mm, vekt: ca. 950 kg. Dokumentasjon foreligger. Besiktigelse på stedet er mulig. Gbodpoyw Svrefx Angop