Standard-SZM

Scania R620 6x2 tractor unit w/ tipping hydraulics and as

Tilstand: som ny (utstillingsmaskin), Byggeår: 2025, Funksjonalitet: fullt funksjonell, skjærelengde (maks.): 6 000 mm, kuttebredde (maks.): 1 050 mm, HORIZONTALE, versatile SAWMILL, DOUBLE CUTTING / in WRC 1050 “VENEER” version, AUTOMATIC cutting, specifically designed for THIN VENEER STRIP processing • Frame length: 11m for 6.5m log length, extensions available • BI-CUT SAW HEAD with adjustable pressure blade guides for supporting the blade during cutting • CONTROL STATION & SYSTEM separate from the sawbed, TO BE POSITIONED ACCORDING TO THE LAYOUT TO BE DEFINED – on-site, open station with or without seat, including the control system • MAIN MOTOR 45kW WITH optional FREQUENCY INVERTER • SCREW JACKS fitted in each side pillar / 2 screws / with or without FREQUENCY INVERTER for faster and more precise vertical movement • HIGHER OUTPUT HYDRAULIC POWER UNIT ON THE FRAME: 18kW + 200L TANK + FREQUENCY INVERTER – allows hydraulic equipment on the chassis to operate faster • FastSmartCut control system, SCHNEIDER 4.0 platform / WRAVOR PROGRAM / 2 joysticks + touchscreen as quoted, instead of original standard PLC 1040 system • AUTOMATIC pushers for processed timber – GUILLOTINE option quoted: vertical arm for DIFFICULT logs, increases SPEED • 1 CAMERA – 1 monitor, additional cameras available as option • HYDROFOR cooling system • LUBRICATION SYSTEM – available as ELECTRIC version or mechanical pump • 5 pairs of hydraulic DOGS, with optional hydraulic cylinder • 5 hydraulic ROLLERS, vertical movement up/down • 3 NEW GENERATION LOG ALIGNERS (not at 90°) • 3 NEW GENERATION LOG TURNERS, V-shaped cradle system • ELECTRICAL CABLING: flat cables safely housed in trunking • 4m SILON BELT outfeed conveyor, automatic up/down movement controlled via command system • ZIPPER SAWDUST EXTRACTION system: direct extraction (vacuum at frame), positioned close to the sawblade, can be connected to existing extraction circuit. This complements the more powerful VENEER system vs standard • SAW HEAD DRIVE CABLE system, SEW Asynchronous system for greater speed and accuracy: optional Differences between the standard horizontal sawbed and the veneer-dedicated sawbed: the saw is equipped with the following specialized features: - Reinforced housing at the saw head to prevent sawdust intrusion between flywheel and blade - Extra protective shields due to higher speed/high volume dust extraction - Double-cut blade - Graphite blade guides (standard model uses bakelite) - Special blade guide quick-change system - Special protection for frame and sensors, plexiglass in saw head cover (different cover design from standard band saw) - Additional sensors for blade deviation - Compressed-air cleaning along the entire sawbed Fodpfxovtqtvj Abheft Additional OPTIONS available upon request.

Tilstand: som ny (utstillingsmaskin), Utstillings- / Demomaskin Solid båndsag for stokker med diameter opptil 75 cm, utstyrt med bimetallbånd for alle treslag og maksimal snittpresisjon. Manuelt skjæreprogram, høydejustering via håndsveiv, trinnløs justerbar matehastighet, kan utvides ubegrenset med forlengelsesseksjoner. CE-sertifisert. Originalen! Ikke en kopi! Tekniske data: Maks. stokkdiameter: 750 mm Maks. bordbredde: 640 mm Motoreffekt S1: 5,5 kW Snittlengde: 3,6 m Forlengelsesseksjon: 2,25 m Eksempelbilde! Fedpfx Abovrvrbjhoft Prisendringer, feil og trykkfeil forbeholdes.

Tilstand: brukt, maskin-/kjøretøynummer: YS2R6X2000203xxxx, kjørelengde: 700 000 km, Byggeår: 2008, Ta kontakt med ATS Norway for mer informasjon. Vennligst oppgi referansenummer ved forespørsel: 20999 Spesifikasjoner: Modell: 2008 Km: ca. 700 000, ny motor ca. 180 000 EU-godkjent til: 12.06.2026 Euro 5 6x2 Akselavstand: 310/131 cm Hydraulikk NATO-tilkobling Kosmetiske skader Verktøykasse Klimaanlegg Sovehytte Radio/DAB Tilhenger ikke inkludert Ffjdpfx Aoxkt Nkjbhjt Leveringsklar Beskrivelse: 2008 Scania 480 6x2 trekkvogn med hydraulikk og ny motor. Ca. 700 000 km, ny motor ved ca. 180 000 km. Utstyrt med hydraulikk. Leveringsklar. Km: 700000 Hk: 480 EU-godkjent til: 12.06.2026 Egenvekt: 9780 Totalvekt: 27000 Nyttelast: 17145 Bredde: 255 Lengde: 705 Euro: 5 Modell: 480