Kjøp brukt Salen (520)

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2015, driftstimer: 15 322 h, lastekapasitet: 7 000 kg, løftehøyde: 5 700 mm, fri løftehøyde: 1 800 mm, drivstofftype: diesel, mastetype: triplex, byggehøyde: 2 950 mm, gaffelbærerbredde: 1 540 mm, gaffellengde: 1 390 mm, egenvekt: 11 800 kg, total lengde: 5 200 mm, drivtype: Diesel, konstruksjonsbredde: 2 280 mm, Sideload forklift Load center: 700 Fork width: 250 mm Fork thickness: 60 mm Mast type: Triplex Bjdpfowx Sy Hjx Ad Tsdk Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 355/65-15 Rear tires type: Pneumatic Rear tires size: 355/65-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing & financing at attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this GX70/14/57TR. P.S.: Our master forklift workshop specializes in repairs, maintenance, refurbishments, and custom builds for forklifts from 8 tons and up. We can also offer to display your vehicle at our premises for commission-based sale. 1x NIVO fork Heating, full cabin, full free lift, Platform height: 1030 mm

Tilstand: klar til bruk (brukt), Byggeår: 2010, Merke: HSM Modell: V-Press 1160 plus Årsmodell: 2010 Pressetrykk: 532 kN Spenning: 400 V Maks. balle vekt: opptil 550 kg (avhengig av materiale) Ballemål: 120 x 110 x 120 cm Bdedpfoxz Dwtsx Ad Tsk Maskinvekt: 2403 kg Maskinens dimensjoner: 180 x 157 x 298,5 cm Mål på innmatingsåpning: 19,5 x 65 x 111,5 cm Tilstand: meget god! Funksjonstestet og kontrollert. FLITS Rental & Sales service: Vi leverer en bunt bindetråd (120 tråder) med hver maskin. Trenger du flere bunter bindetråd? Be om et uforpliktende tilbud. Hos FLITS Rental & Sales velger du for raskhet, tydelighet og pålitelighet. Vi tenker sammen med deg, gir raske tilbakemeldinger og sørger for at du får den riktige maskinen raskt. Du er hjertelig velkommen til å se maskinene på vårt anlegg. Vi holder til på: Schoterlandseweg 94, 8413NE Oudehorne. Besøk er kun mulig etter avtale, slik at vi har god tid til å gi deg grundig informasjon og vise deg de riktige maskinene. Vi hjelper deg gjerne videre! Avfallspresse Papirpresse Kartongpresse Plastpresse Avfallskomprimator Resirkulering Tekstilpresse Avfall Avfallshåndtering

Tilstand: svært god (brukt), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is designed to test the ingress of water into enclosures. With the addition of a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel-mounted and replaceable nozzle holders - Adjustable water flow rate with measurement - Programmable test duration control Mechanical load data: Max. load for test specimen (evenly distributed): Permissible specimen weight for test holder (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class testing: Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: Bdedjxxuytopfx Ad Tok External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photos) (Specifications are subject to change and errors reserved!) For further questions, we would be pleased to assist you by phone.

Tilstand: svært god (brukt), Byggeår: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker Year of manufacture: 2005 Injection unit: Screw diameter: 30 mm Shot weight: 77.4 g Bdedpfoxz Aibox Ad Tok Injection pressure: 2025 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen dimensions: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touchscreen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - bimetallic Sepro Industrial Robot 55 Sprue Picker Year of manufacture: 2018 It is possible to purchase a Moretto brand raw material feeding system at an additional charge. The set includes: - Volumetric screw dosing unit with hopper - Conveyor unit with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pump/motor: 15 kW Heating capacity: 8.12 kW Total power: 23.12 kW All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine is available on request, or you can participate in live technical tests at our company in Łódź. Price: On request

Tilstand: svært god (brukt), Byggeår: 2019, Utstyr: motorbrems, Altendorf F45 EvoDrive 2019 – CNC – 3000 mm – Top Zustand For sale is an Altendorf F45 EvoDrive, year of manufacture 2019, in excellent condition. The machine comes from a chipboard factory and was used in quality control for sample cuts only. The saw has been serviced regularly. The machine is immediately ready for operation. Features: + EvoDrive control system + Eye-level control panel + 5.5 kW VARIO motor (variable speed) + Double roller carriage 3000 mm + CNC rip fence 1000 mm + CNC angle fence UNO 90 + Table extension 840 mm + Machine height 910 mm Bdjdpfx Adexzhpaj Tek + Saw shaft 30 mm + 400 V / 50 Hz Condition: + Excellent technical and visual condition Scope of delivery: + Altendorf F45 EvoDrive + 3000 mm double roller carriage + CNC rip fence + CNC angle fence + 840 mm table extension + Operating manual & inspection documents + Large and small extraction hoods Price: Negotiable €22,500 net (current new price over €40,000 net) Location: - Haldensleben - Transport can be organized - Inspection possible by appointment.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1996, lastekapasitet: 3 300 kg, løftehøyde: 6 200 mm, fri løftehøyde: 2 180 mm, drivstofftype: elektrisk, mastetype: triplex, byggehøyde: 2 950 mm, gaffelbærerbredde: 1 520 mm, gaffellengde: 970 mm, total lengde: 3 250 mm, drivtype: Elektro, konstruksjonsbredde: 1 850 mm, Four-way side loader Bdodswdkntopfx Ad Tek Load center: 400 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing & financing on favorable terms are always possible with us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail regarding this EVS35-33/10-08/63TRDK7.5. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom modifications for forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale at our facility. Fork positioner, Full free lift,

Tilstand: klar til bruk (brukt), Byggeår: 2010, Merke: HSM Modell: V-Press 1160 plus Bdodsxy Iycspfx Ad Tsk Årsmodell: 2010 Pressetrykk: 532 kN Spenning: 400 V Maks. balle vekt: opptil 550 kg (avhengig av materiale) Ballemål: 120 x 110 x 120 cm Maskinvekt: 2403 kg Maskinens dimensjoner: 180 x 157 x 298,5 cm Mål på innmatingsåpning: 19,5 x 65 x 111,5 cm Tilstand: meget god! Funksjonstestet og kontrollert. FLITS Rental & Sales service: Vi leverer en bunt bindetråd (120 tråder) med hver maskin. Trenger du flere bunter bindetråd? Be om et uforpliktende tilbud. Hos FLITS Rental & Sales velger du for raskhet, tydelighet og pålitelighet. Vi tenker sammen med deg, gir raske tilbakemeldinger og sørger for at du får den riktige maskinen raskt. Du er hjertelig velkommen til å se maskinene på vårt anlegg. Vi holder til på: Schoterlandseweg 94, 8413NE Oudehorne. Besøk er kun mulig etter avtale, slik at vi har god tid til å gi deg grundig informasjon og vise deg de riktige maskinene. Vi hjelper deg gjerne videre! Avfallspresse Papirpresse Kartongpresse Plastpresse Avfallskomprimator Resirkulering Tekstilpresse Avfall Avfallshåndtering

Tilstand: svært god (brukt), Weiss Type: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber Volume: 34 liters Standard feedthroughs installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Technical specifications for temperature tests: Temperature range: -60 to +150°C Temperature deviations (stabilized, according to IEC 60068-3-5): Temporal temperature fluctuation at center of usable space: ±0.3 to ±1 K; ±1 to ±2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Heat compensation max.: 550 W Technical specifications for climate tests: Temperature range: +10 to +95°C Bdsdpfx Astr Dinjd Tsk Humidity range: 10 to 98% RH Temperature and humidity deviations (stabilized, according to IEC 60068-3-5): Temporal temperature fluctuation at center of usable space: ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of usable space: ±3 to ±5% RH Operating data: Test chamber lighting: Halogen bulb, 12V, 20W Rated voltage: 1/N / PE AC 230V ±10% 50Hz Rated power: 2.5 kW Rated current: 11 A Recommended fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat output to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg Important Notice for Buyers! For your safety, the following steps are performed on all our offered chambers before sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful verification, the chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Tilstand: svært god (brukt), Byggeår: 2007, Engel Insert 80V/80V/100 2F / 2-C Holm-free Machine, Vertical / Perfect Technical Condition Year of manufacture: 2007 Injection Unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Dosage volume: 54 cm³ Clamping Unit: Bsdpfexzz Rksx Ad Tedk Clamping force: 100 t Tie-bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, equipped with rotary table Air valve x 6 Hydraulic core pull x 2 Control for 12 hot runner zones Infrared safety curtains Thermoplastic and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by authorized Engel service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85 x 1.47 x 2.30 m Drive: Pump/Motor: 30 kW All offered machines are started and tested by our service engineers before sale. It is possible to obtain a video of the technical tests performed on the selected machine or participate in live technical tests at our company premises in Łódź. Price: On request

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2002, driftstimer: 5 975 h, lastekapasitet: 6 000 kg, løftehøyde: 4 500 mm, fri løftehøyde: 680 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 3 200 mm, gaffelbærerbredde: 1 520 mm, gaffellengde: 1 250 mm, egenvekt: 9 800 kg, total lengde: 5 100 mm, drivtype: Diesel, konstruksjonsbredde: 2 050 mm, Side loader Bdodpfewx Sy Tjx Ad Tok Load center: 600 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Super elastic Front tires size: 3.00-15 Rear tires type: Super elastic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing and financing options are readily available at attractive terms. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail on this GX60/12/45. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons and up. If you wish, you can also consign your vehicle for sale through us. Heater, full cab, Platform height: 1050 mm

Tilstand: svært god (brukt), Vacuubrand chemical diaphragm pump We offer a Vacuubrand chemical diaphragm pump for sale. Bdedpfx Aoq Suwmjd Tok VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: - Max. pumping speed at 50Hz: 8.1 m³/h - Ultimate vacuum: 2 mbar / 1.5 torr - Ultimate vacuum with gas ballast: 10 mbar / 7.5 torr - Number of cylinders: 8 - Number of stages: 4 - Vacuum display/controller type: without controller - Ambient temperature, lower limit (operation): 10°C - Ambient temperature, upper limit (operation): 40°C - Ambient temperature, lower limit (storage): -10°C - Ambient temperature, upper limit (storage): 60°C - Max. outlet pressure (absolute): 1.1 bar - Inlet connection: small flange KF DN 25 - Outlet connection: small flange KF DN 16 - Rated power: 0.5 kW - Minimum rotational speed (VARIO): 30 rpm - Maximum rotational speed: 1500 rpm - Nominal speed: 1500 rpm - IP protection class according to IEC 60529: IP 54 - Dimensions (L): 560 mm - Dimensions (W): 457 mm - Dimensions (H): 410 mm - Weight: 61 kg - Noise level (sound pressure) at 50 Hz and 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®): 42 dBA - EX certification pump chamber (pumped gases): II 2G Ex h IIC T3 Gb X; external with inert gas purging: II 2G Ex h IIB T4 Gb X; external without inert gas purging: II 3G Ex h IIB T4 Gc X; motor: II 2G Ex db IIB T4 Gb - NRTL certification: No - Rated voltage range 1: 230 V - Mains frequency voltage range 1: 50 Hz - Weight: 61 kg - Type: MV 10C EX VARIO - Condition: used - Scope of delivery: (see photo) (Technical data and information are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Tilstand: svært god (brukt), Byggeår: 2017, Engel Victory 2550/400 Tech Ecodrive with Sepro Industrial Robot Success 22 / Hybrid Machine / Operating hours: approx. 300 h in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1450 g Injection pressure: 1640 bar Dosage volume: 1558 ccm Clamping unit: Clamping force: 400 t Tie bar distance: 0x0 mm Platen size: 1320x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 – touchscreen Additional equipment: Machine in perfect technical condition, like new Tie-bar-less, hybrid machine: energy efficient and very quiet Operating hours: approx. 300 in automatic mode Euromap 67 Robot interface Control with air valve 3 hydraulic core pulls Injection unit is wear-resistant and corrosion-resistant Clamping and injection units driven by servomotors Proportional valve on injection unit – precise injection Stäubli QMC 122/V3 magnetic clamping system, integrated into the machine control (the platens have an additional dedicated control system) – available at extra cost Sepro Industrial Robot Success 22 Bedpfx Adsxzz Euj Tjdk Year of manufacture: 2018 5-axis robot Touchscreen control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 26,600 kg Length/Width/Height: 7.70x2.34x2.30 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2008, driftstimer: 18 263 h, lastekapasitet: 7 000 kg, løftehøyde: 6 300 mm, fri løftehøyde: 2 100 mm, drivstofftype: diesel, mastetype: triplex, byggehøyde: 3 150 mm, gaffelbærerbredde: 1 540 mm, gaffellengde: 1 400 mm, egenvekt: 11 050 kg, total lengde: 5 150 mm, drivtype: Diesel, konstruksjonsbredde: 2 280 mm, Sideload forklift Load centre: 700 Bdedpfxowwm Uvj Ad Tok Fork width: 200 mm Fork thickness: 65 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 355/65-15 Rear tyres type: Superelastic Rear tyres size: 355/65-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, pallet trucks, and sideloaders in stock at our Hamburg and Gdansk locations. Please visit our website - sago-online. Hire purchase and financing on attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr Peter Sawitzki, will provide you with comprehensive advice on this GS70/20/63TR. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tonnes. We are also happy to showcase your vehicle with us for commission sales. Fork positioner, Heater, Full cab, Full free lift, Platform height: 970 mm

Tilstand: svært god (brukt), Type: HT 7010 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Housing dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Interior dimensions: Width 550 mm, Depth 350 mm, Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW, Rated current: 14.5 A Temperature range: -70°C to +180°C 2x side cable ports, 9 cm Weight approx. 260 kg Refrigerants: R404A and R23 Important information for your safety as a buyer: The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant Bdodpfxehhyz Ss Ad Tek 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to technical modification and errors in data!) If you have further questions, we will be happy to answer them by phone.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2002, driftstimer: 10 539 h, lastekapasitet: 4 000 kg, løftehøyde: 6 500 mm, drivstofftype: gass, mastetype: simplex, byggehøyde: 4 030 mm, gaffelbærerbredde: 1 315 mm, gaffellengde: 1 600 mm, egenvekt: 7 550 kg, total lengde: 4 120 mm, drivtype: Treibgas, konstruksjonsbredde: 2 400 mm, Sideload forklift Load center: 800 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Super elastic Front tires size: 27x10-12 Rear tires type: Super elastic Rear tires size: 27x10-12 Bdjdpjv U Erpjfx Ad Tjk Description: In addition to this Baumann model, we have approximately 200 heavy duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Hire purchase and financing on attractive terms are always available. We also gladly buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this HX40/16/65. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom modifications for forklifts from 8 tons and up. We can also offer to list your vehicle for commission sale at our facility. Heater, full cab, Platform height: 850 mm

Tilstand: svært god (brukt), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z axis: 1.25 micron Precision in X and Y axis: 7.5 micron Max. extruder temperature: 500 ºC Max. build chamber temperature: 120 ºC Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum consumption: 3 kW/h 7” LCD touchscreen Remote monitoring Industry 4.0 ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Filament end sensor Print recovery system Liquid cooling Double-hardened glass Base fixed by vacuum Bdodpfx Ajnnzyqjd Tek High printing speed Encoder-controlled positioning Condition: used Scope of delivery: (See pictures) (Sale from site!) (Subject to change and errors in technical data, information is subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1995, driftstimer: 18 748 h, lastekapasitet: 5 000 kg, løftehøyde: 5 100 mm, fri løftehøyde: 1 700 mm, drivstofftype: diesel, mastetype: triplex, byggehøyde: 2 650 mm, gaffelbærerbredde: 1 300 mm, gaffellengde: 1 390 mm, egenvekt: 8 400 kg, total lengde: 4 670 mm, drivtype: Diesel, konstruksjonsbredde: 2 150 mm, Sideload forklift Load center: 700 mm Fork width: 200 mm Bjdpfx Aewx Sytjd Tsdk Fork thickness: 60 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts & sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing on attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with comprehensive advice concerning this DX50/14/51. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We can also accept your vehicle for consignment sale at our premises. 1x NIVO fork Heater, full cab, full free lift, Platform height: 1050 mm

Tilstand: nesten som ny (brukt), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Device XENOTEST BETA+ – Material Testing Device / Weathering Test Apparatus with Humidification and Spray System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is used to simulate sunlight, weather, and climatic influences and is employed worldwide in research, quality control, and materials testing. Features: - Professional device for UV and weather resistance testing - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Equipment: - Weathering and lightfastness testing device with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for adjustment of spectral distribution - Humidification and spray system (ultrasonic humidifier, spray rods) - Measurement system with XENOSENSIV sensor for recording irradiance and black standard temperature - Integrated touch display for control and programming - Pre-programmed standard tests (e.g. ISO 11341, ISO 4892-2, ISO 105-B02/B06) as well as freely definable test programs - Documentation possible via integrated printer (paper roll) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg Bdsdow Thykopfx Ad Tok - Power connection: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and error!) If you have further questions, we are happy to answer them by phone.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 2000, driftstimer: 10 194 h, lastekapasitet: 7 000 kg, løftehøyde: 4 000 mm, fri løftehøyde: 325 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 2 900 mm, gaffelbærerbredde: 1 450 mm, egenvekt: 9 840 kg, total lengde: 4 800 mm, drivtype: Diesel, konstruksjonsbredde: 2 200 mm, Sideload forklift Load centre: 700 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 3.00-15 Rear tyres type: Superelastic Rear tyres size: 3.00-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk facilities. Visit our website - sago-online. Hire-purchase and financing on attractive terms are always available. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr Peter Sawitzki, will be pleased to advise you in detail about this J/SH70/14/40. P.S.: Our master workshop is specialised in repair, maintenance, overhauls, and custom builds for forklifts from 8 tons and up. We are also happy to showcase your vehicle for commission sale at our facility. Heater, full cab, Bdsdpfx Adswacbde Tek Platform height: 1,030 mm

Tilstand: svært god (brukt), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest Unit Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust, high-quality chest unit designed for conducting condensation water tests. Ideal for laboratories, quality control, or industrial applications. Technical Data & Features: Model variant: Constacon K 1000 M-TR – Condensation Water Tester without Ventilation Chamber Volume: approx. 1000 litres Operating Mode: Manual (Type M-TR) External Dimensions (W × D × H): 2600 × 1120 × 1210 mm Internal Test Chamber Dimensions (W × D × H): 1535–1425 × 800–780 × 660–650 mm Bsdpew Tbdpefx Ad Todk Test Standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operating mode are set directly on the unit. Temperature Control: PID-regulated, typical setpoints: Condensation tests: approx. 40°C (up to max. 50°C) Heating Time: approximately 1 hour Weight: approx. 400 kg Condition: Used Scope of Delivery: (See image) (Specifications may be subject to change and errors excepted!) For further enquiries, we are happy to assist you by phone.

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1999, lastekapasitet: 5 000 kg, løftehøyde: 6 000 mm, drivstofftype: diesel, mastetype: simplex, byggehøyde: 3 850 mm, gaffelbærerbredde: 1 300 mm, gaffellengde: 1 400 mm, egenvekt: 8 200 kg, total lengde: 4 700 mm, drivtype: Diesel, konstruksjonsbredde: 2 150 mm, Sideload forklift Load center: 700 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Bjdpsv U Ervofx Ad Tedk Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideload forklifts in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Hire purchase and financing on favorable terms are always available. We are also happy to buy your used vehicle outright, even if you do not purchase one from us. Our proprietor, Mr. Peter Sawitzki, is happy to provide detailed advice on this DX50/14/60. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons. We are also happy to display your vehicle with us for consignment sale. Heater, Full cab, Platform height: 1050 mm

Tilstand: svært god (brukt), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM salt spray test chamber, model SAL 1000-FL PLC, ideal for industrial corrosion testing according to international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load capacity 450 kg - Precise control and reproducible testing - Versatile for salt spray, condensation, and ventilation testing Technical details: - Exterior material: Stainless steel 1.4301, powder-coated (custom design) - Test chamber material: Stainless steel, ECTFE-coated - Max. test chamber temperature: +80 °C - Temperature stability: ±0.3 °K, over time ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: Demineralised, max. conductivity 20 µS/cm Bedpfx Aoxnyqved Tedk - Water consumption/humidifier: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm - Including base cabinet: 2160 x 670 x 1890 mm - Internal test chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. support rod load: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg - Condition: used - Scope of delivery: (see picture) (Specifications and technical details are subject to change and error!) For further questions, feel free to contact us by phone.

Tilstand: svært god (brukt), COTEC Type: HCS 100 P-UH COTEC HCS 100 P-UH – Hydrophobic Coating System / PVD Unit For sale is a COTEC HCS 100 P-UH, a fully automatic hydrophobic coating system for industrial applications. The unit is ideal for producing high-quality, abrasion-resistant, and transparent hydrophobic and oleophobic coatings on glass, plastic, or metal. Areas of application: - Optics (e.g., eyeglass lenses, precision optics) - Display and electronics industry - Medical technology - Automotive and supplier industry - Consumer goods and decorative surfaces Technical data & features: Bsdpfx Aow Tbvrjd Todk Model: COTEC HCS 100 P-UH Process cycle time: approx. 12 minutes per batch Capacity: up to 110 substrates, Ø 70 mm (2 racks) Chamber size: Ø 600 × 540 mm Heatable chamber up to 65 °C Fully automatic process control (PLC) with 19" control unit Vacuum system with integrated evaporator for DURALON materials Uniform coating even with complex 3D geometries No post-treatment required Weight: approx. 300 kg Condition: used Scope of delivery: (see image) (Specifications and details subject to change and error!) For further questions, we are happy to assist you by phone.

Tilstand: nesten som ny (brukt), Byggeår: 2020, Markforged Type: X7 Gen 2 3D Printer The X7 prints industrial-grade manufacturing aids, jaws, tools, fixtures, and end-use parts. It was developed for production use and prints parts that are stronger than milled aluminum at a fraction of the cost. It combines best-in-class surface finish, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with adaptive manufacturing technology Blacksmith, available exclusively on the X7. Technical Data: Printer Features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build Volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print Bed: Kinematic coupling - flatness up to 80 μm accuracy Laser: In-process monitoring, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, carbon fiber FR, glass fiber, aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part Properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill, multiple geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at added cost) Security: 2-factor authentication, org admin access, single sign-on Blacksmith: Adaptive manufacturing platform (requires additional purchase) Year of manufacture: 2020 Last maintenance: December 2024 For sale ex location Condition: used Bdedpfx Asvvldujd Tek Scope of delivery: (see pictures) One spool each of Kevlar, fiberglass and carbon fiber, 11 partially used Onyx filament spools (Specifications and details subject to change and error!) For further questions, we would be happy to assist you by phone.

Tilstand: brukt, Mecmesin Mecmesin Ultra Test universal testing machine + AFG 100N force gauge (Max Load 1000N) Description: For sale is a Mecmesin Ultra Test universal testing machine with a maximum test force of 1000 N (≈ 100 kgf). Included in the delivery is a Mecmesin AFG 100N (Advanced Force Gauge), which serves as the force measurement module and display unit. The system is suitable for a wide range of tensile and compression tests in plastics, packaging, foodstuffs (e.g., dough), textiles, electronics, and adhesive testing. Technical data (Ultra Test): Maximum test force: 1000 N Test methods: tensile and compression tests Bdsdpfx Aow Svtisd Tjk Motorized test stand, adjustable speed Typical travel range: approx. 500–1000 mm Positioning accuracy: ±0.1 mm Control directly via the AFG Technical data (AFG 100N): Measurement range: up to 100 N (≈ 10 kgf) Resolution: 0.01 N Accuracy: ±0.1% of measured value Measurement types: tensile and compression force Peak hold function, live display Interfaces: RS-232 / USB (depending on model) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, information subject to confirmation!) We are happy to answer further questions by phone.