Kjøp brukt Potet (166)
Sorter resultater
- Laveste pris Høyeste pris
- Nyeste annonser Eldste annonser
- Korteste avstand Største avstand
- Nyeste produksjonsår Eldste produksjonsår
- Siste oppdatering Eldste oppdatering
- Produsenter fra A til Å Produsent fra Z til A
- Relevans
- Laveste pris
- pris
- Høyeste pris
- pris
- Nyeste annonser
- Innstillingsdato
- Eldste annonser
- Innstillingsdato
- Korteste avstand
- avstand
- Største avstand
- avstand
- Nyeste produksjonsår
- produksjonsår
- Eldste produksjonsår
- produksjonsår
- Siste oppdatering
- oppdatering
- Eldste oppdatering
- oppdatering
- Produsenter fra A til Å
- produsent
- Produsent fra Z til A
- produsent
- Betegnelse fra A til Å
- Betegnelse
- Betegnelse fra Z til A
- Betegnelse
- Modell fra A til Å
- Modell
- Modell fra Z til A
- Modell
- Laveste referanse
- referanse
- Høyeste referanse
- referanse
- Korteste driftstid
- Driftstid
- Lengste driftstid
- Driftstid
- relevans
- relevans
Annonse
Gondelsheim
1 270 km
Overhead kran innendørskran kran rullebane kran
Demag CTI - 7x DH Seilzug Alloy FoundryEinschinenbahn Pfannentransport Kran 7t
Ring
Byggeår: 2002, Tilstand: god (brukt), maskin-/kjøretøynummer: HHNRW, Demag / CTI monorail system with 7 Demag DH hoists
(Pot transport system from an aluminium foundry)
Payload / lifting capacity: 6,300–7,000 kg / 6.3 + 7 t
Approx. 100 m track carriers (CTI profile – modular system) without hall constructions, etc.
9 pneumatic switches, curved sections, various distributors + control cabinets + pneumatic controls
Documentation including circuit diagrams and inspection books is available.
Hoists can be moved individually along the rail system, each hoist has its own control system, including conductor rail system for supply of the hoists
Fully two-stage travel – fine lift!
Used condition – system was serviced/overhauled in 2018 for €155,000
(travel rails / hoists)
Nodeh Ad Saepfx Aqtjwh
System is dismantled and immediately available (delivery volume approx. 20–25 t, about 2 lorry loads)
More pictures available on request – please inquire
Shipping by freight forwarding possible, collection preferred
Freight costs within 500 km €1,400. For precise costs, please ask with postcode!
Annonse
Berlin
939 km
Doseringsenhet
Leonhardt
Ring
Tilstand: klar til bruk (brukt), Egnet seg for fylling av pølser, samt for dosering av potet- og pølsesalater. Kaliber: 55/60 mm. Kapasitet: 3–4 pølser per minutt. Tråkkens volum: ca. 100 kg. Produksjonsår: 1990-tallet. Leveres uten dokumentasjon. Besiktigelse på stedet er mulig.
Nodpfeq Npf Asx Aqtowh
Annonse
Goudriaan
980 km
Staande Stor Bag Vultrechter VTS03
Staande Big-Bag Vultrechter VTS03
Ring
Byggeår: 2024, Tilstand: brukt, Ny: Ja
Nodpfx Aqsx I Exbjtswh
Farge: Svart
Anvendelig materiale: Potet

Få informasjon nå
+44 20 806 810 84
+44 20 806 810 84
Legg inn annonse nå
*per annonse/måned
Annonse
Duxford
1 063 km
Protosheet Eng 5L automatisk fumigeringskjele
ProtosheetEng 5L Auto
Ring
Tilstand: brukt, Denne oppføringen gjelder Protosheet Engineering 5L Auto Fumigation pot
Nwjdpfx Aqjxhgb Ijtoh
Rustfritt stål
Enheten er i full fungerende stand og klar til umiddelbar bruk
Annonse
Lorquí
2 583 km
BARRIQUAND STERIFLOW ROTERENDE AUTOKLAV 1B
BARRIQUAND STERIFLOW
Ring
Tilstand: nesten som ny (brukt), Autoklaver brukes til å sterilisere pakkede produkter som krever høye temperaturer (+100°C) for å eliminere eller inaktivere sykdomsfremkallende mikroorganismer.
Rotasjonsautoklaver: Disse benyttes for sterilisering av produkter som gir større utfordringer i varmeoverføring. Eksempler inkluderer grønnsaker i hele, revet eller terningform, samt drikker som smoothies, te, kaffe eller kondensert melk.
Nwsdpfx Aqszbi U Eotjh
I denne typen roterer kurven inne i autoklaven, rører innholdet og forhindrer at bitene nærmest beholderveggene blir brent.
Brettmål: 600 mm x 400 mm x 100 mm.
Totale mål på lastevognen: 1500 mm x 1400 mm x 820 mm.
Mål på den statiske strukturen (5 brett): 700 mm x 50 mm x 54 mm.
INKLUDERER:
- Trykkpumpe.
- Varmeveksler:
- Merke: Barriquand Steriflow
- Type: POT DE RECUPERATION.
Annonse
Piaseczno
1 210 km
Papir skjære maskin
iEchoTK4s
Ring
Tilstand: ny, Byggeår: 2025, Funksjonalitet: fullt funksjonell, kuttebredde (maks.): 1 600 mm, innsettingshøyde: 50 mm, skjærelengde (maks.): 2 500 mm, inngangsstrøm: 30 A, inngangsspenning: 400 V, Utstyr: dokumentasjon / manual, Akonda.pl – Din offisielle iEcho-partner.
Vi tilbyr den svært allsidige og kraftige iEcho TK4S, den ultimate løsningen for automatisert skjæring på tvers av flere bransjer. Dens modulære design gir perfekt tilpasning til dine spesifikke produksjonsbehov, enten det gjelder skilt & display, trykk, emballasje, tekstil eller industriell produksjon.
iEcho TK4S er utviklet for presisjon, hastighet og pålitelighet. Den robuste konstruksjonen og avanserte funksjoner sikrer et høyt kvalitetsnivå på et bredt spekter av materialer. Som offisiell iEcho servicepartner tilbyr Akonda.pl omfattende støtte, inkludert profesjonell installasjon, opplæring av operatører og løpende teknisk service for å sikre en problemfri drift.
Nøkkelfunksjoner for iEcho TK4S:
Modulært verktøyhode: Kan utstyres med opptil tre verktøymoduler samtidig, slik at komplekse oppgaver kan utføres uten avbrudd. Et bredt utvalg av verktøy er tilgjengelig:
- Elektrisk oscillerende verktøy (EOT): Perfekt for kutting av myke og middels tette materialer.
- Pneumatisk oscillerende verktøy (POT): Luftdrevet verktøy med 8 mm slaglengde for kutting av harde, tette materialer opptil 110 mm tykkelse.
- Universalkniv (UCT): For høyhastighets gjennomkapping av materialer opptil 5 mm.
- Pregeverktøy (CTT): Gir perfekt preg på papp og bølgepapp.
- Høyhastighets fresemotor (RZ): Med en hastighet opp til 60 000 o/min for fresing og gravering av harde materialer som akryl og PVC.
Høy ytelse: Maksimal skjærehastighet på 1500 mm/s og nøyaktighet på ±0,1 mm.
Solid konstruksjon: Bygget med lett og sterk flyaluminium.
Klar for automatisering: Kan utstyres med automatiske mate- og oppsamlingssystemer for 24/7 produksjon.
Intelligent kamerasystem: Sikrer presis posisjonering og nøyaktig konturskjæring av trykte jobber.
Leveringsklart fra lager & full service!
Hos Akonda.pl forstår vi viktigheten av rask levering og pålitelig støtte.
PÅ LAGER NÅ: Vi har alltid iEcho TK4S-maskiner i den populære størrelsen 2500 x 1600 mm tilgjengelig for umiddelbar levering.
ANDRE STØRRELSER: Behov for en annen størrelse? Ta kontakt for informasjon om andre dimensjoner og tilpasninger. Vi leverer hele utvalget av iEcho-modeller.
PROFESJONELL SERVICE: Vårt team av fabrikkutdannede teknikere tilbyr profesjonell installasjon, opplæring og garanti/ettergarantiservice over hele Europa.
Hvorfor velge Akonda.pl?
Autorisert iEcho servicepartner: Din direkte kontakt for profesjonell støtte og originale reservedeler.
Nwodpfxexfrh Ue Aqteh
Største iEcho-lager i Europa: Kort leveringstid og rask tilgang til maskiner.
Dokumentert kompetanse: Lang erfaring med skjæreløsninger for en rekke industrielle bruksområder.
Kontakt oss i dag for et skreddersydd tilbud, avtale om demonstrasjon eller for å diskutere hvordan iEcho TK4S kan revolusjonere din produksjon.
Annonse
Oradea
1 723 km
AHT-frysebokser
AHTMiami 250 (-)/(U) LED ADVS ECO R290
Ring
Tilstand: helrenovert (brukt), Funksjonalitet: fullt funksjonell, garantiperioden: 6 måneder, type innstrømsstrøm: Klimaanlegg, inngangsspenning: 240 V, omgivelsestemperatur (min.): 16 °C, elektrisk sikring: 16 A, inngangsstrøm: 2 A, inngangsfrekvens: 50 Hz, omgivelsestemperatur (maks.): 25 °C, stabelhøyde: 880 mm, total lengde: 2 500 mm, total bredde: 850 mm, totalvekt: 155 kg, innvendig bredde: 733 mm, innvendig lengde: 2 343 mm, tankkapasitet: 753 l, energiforbruk: 5 kWh, effekt: 50 kW (67,98 hk), Utstyr: belysning, fryser, Fun Ice SRL este reprezentant AHT în România de peste 25 de ani.
Nsdpfsrhwrbsx Aqtewh
Toate echipamentele sunt recondiționate, însă compania noastră comercializează și unități nerecondiționate.
În timpul procesului de recondiționare, toate congelatoarele second-hand propuse sunt supuse unei restaurări integrale la fabrică, respectiv:
- Carcasa este recondiționată, eliminându-se loviturile și zgârieturile;
- Etichetare pe trei părți, alb RAL9003 / gri RAL7043 (opțional, disponibil orice RAL sau design la cerere);
- Curățare igienică;
- Schimbare garnituri sticlă culisantă;
- Echipare completă la interior – set grilaje perete, rafturi și separatoare;
- Testare completă a congelatorului, cu păstrarea statisticilor de funcționare și menținerea temperaturii setate;
- Dacă este necesar, reparațiile se efectuează exclusiv cu piese de schimb ORIGINALE NOI de la producător (AHT Cooling Systems GmbH);
(Conform politicii companiei, nu se folosesc niciodată piese de la alte congelatoare pentru recondiționare);
- Toate congelatoarele sunt ambalate în ambalajul original pentru transport al producătorului (AHT Cooling Systems GmbH);
(La cererea clientului, este posibilă utilizarea unui ambalaj întărit pentru livrările pe distanțe mari sau pe drumuri dificile)
Toate congelatoarele recondiționate din seria AHT EQ beneficiază de garanție de 6 (șase) luni pentru piese, cu excepția materialelor consumabile și a celor supuse uzurii (agent frigorific, garnituri, neoane etc.).
- Pot fi folosite ca unitate independentă
- Pot fi utilizate în linie
- Accesorii pe stoc (console de fixare, capace superioare și laterale pentru multiplexare în insulă, garnituri pentru capac de sticlă, capace de sticlă glisante)
- Piese de schimb disponibile (compresoare, invertor, panou de control, senzori, ventilatoare)
Annonse
Oradea
1 723 km
Toppfryser og kjøleskap
AHTAHT Kinley XL / Epta 210-250
Ring
Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, garantiperioden: 6 måneder, Fun Ice SRL este reprezentant AHT în România de peste 25 de ani.
Revânzător AHT pentru echipamente noi și second-hand.
Livrare rapidă, la nivel mondial.
Descriere:
!!! Dulapul frigorific orizontal NU este inclus în ofertă !!! Doar suprapozabilul congelator / frigider !!!
AHT Kinley 210/250 cm (poate fi utilizat ca congelator sau frigider, temperatură medie și joasă) !!!
Sistem complet testat și funcțional (bază + 2 rânduri de rafturi)
Agent frigorific ECO R290
Gata de conectare, instalare ușoară
Iluminare internă LED (LED canopy și LED pe uși)
Nwsdpfxorhwulj Aqteh
Unități diverse pe stoc - suprapozabile AHT Kinley / Epta sau Carrier la 210 cm și 250 cm lungime
Se pot combina cu dulapuri AHT Miami sau Athen XL LED (disponibile în stoc la Oradea, România)
Toate echipamentele recondiționate din seria AHT EQ beneficiază de garanție de 6 (șase) luni pentru piese, cu excepția materialelor consumabile și de uzură (agent frigorific, garnituri, lămpi neon etc.)
Orice accesorii și piese de schimb disponibile pe stoc.
Annonse
Tyrkia
2 566 km
H-type 100/40 tonn hydraulisk dyptrekkpresse
CRONOSSTECHCHSP 100/40
Tilstand: ny, Byggeår: 2025, pressekraft: 100 t, slagslengde: 600 mm, bordbredde: 1 000 mm, bordlengde: 1 200 mm, tilbaketrekkskraft: 40 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 100/40
H-type Hydraulic Deep Drawing (Spinning) Press – 8 Guides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and spinning applications. The 8-guide H-frame construction ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke.
The CHSP 100/40 model is designed for precise deep drawing and spinning operations, with a 100 ton main ram and 40 ton lower cushion (pot) capacity. The frame is stress-relieved by vibration for long-term durability and reliable operation.
⚙️ Standard Equipment
- Steel construction H-frame body with 8 guides
- Stress-relieved frame structure by vibration
- Bronze Zr14 guide bushings
- Welds in accordance with WPQR and WPS approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacture compliant with CE standards
- PLC-controlled hydraulic system
- Touchscreen panel (DELTA 7”)
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Display of hydraulic unit oil temperature and system status values
- Cooling system
- Offline filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switching components
📐 Technical Specifications – CHSP 100/40
- Type: Steel construction, 8-guide H-frame press body
- Main Body Material: St52 – ERDEMİR
- Guide Bushing: Bronze Zr14
- Capacity (Ram): 100 Tons
- Capacity (Cushion): 40 Tons
- Movable Table Size: 1000 × 1200 mm
- Fixed Table Size: 1000 × 1200 mm
- Parallelism Tolerance: 120 micron/meter
- Perpendicularity Tolerance: 60 micron/meter
- Ram Stroke: 600 mm
- Cushion Stroke: 200 mm
- Min. Daylight: 100 mm
- Max. Daylight: 700 mm
- Weld Stress Relief: Vibration stress relief
- Welding Application: WPQR and WPS approved by TÜRK-AK accreditation EN ISO 15614-1/2017 (inspected by certified welding coordination engineers as per EN ISO 14731)
- Max. Working Pressure: 250 Bar
- Total Motor Power: 11 kW – IE3
- Main Pump: 22 cm³ – REXROTH or PARKER
- Movable Table Rapid Descent Speed: 150 mm/sec
Nsdpox N T Uyjfx Aqtowh
- Movable Table Drawing Speed: 12 mm/sec
- Movable Table Return Speed: 170 mm/sec
- Cushion Table Forward Speed: 30 mm/sec
- Main Cylinder Bore: Ø230 mm – Ck45
- Cushion Cylinder Bore: Ø140 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 pcs
- Approx. Machine Height: 3400 mm
- Approx. Machine Width: 2950 mm
- Approx. Machine Depth: 2000 mm
- Bottom Table Height from Floor: 1250 mm
- Pre-fill Valve: NG 100
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Offline Filtration: REXROTH or PARKER
- Linear Distance Scale: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touch Panel Screen: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approx. Weight: 9 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annonse
Tyrkia
2 566 km
H-type 400/150 tonn hydraulisk dyptrekking
CRONOSSTECHCHSP 400/150
Tilstand: ny, Byggeår: 2025, pressekraft: 400 t, slagslengde: 1 000 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 150 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 400/150
Nodpex N Uhhofx Aqtewh
H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting principle to provide controlled material flow in metal forming, deep drawing, and spinning applications. Thanks to the 8-slide H-frame construction, maximum rigidity is maintained during pressing, and parallelism and perpendicularity tolerances are stably preserved throughout the long stroke.
The CHSP 400/150 model features a main ram capacity of 400 tons and a blankholder (pot) capacity of 150 tons, designed for deep drawing and spinning applications that require high tonnage. The frame construction is stress-relieved by vibration to ensure long life and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-slide H-frame press body
- Vibration stress-relieved body structure
- Bronze Zr14 slide bearings
- TÜRK-AK accredited WPQR and WPS certified welding applications
(EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA HMI touchscreen panel
- Adjustable ram and blankholder (pot) stroke control
- Adjustable ram and pot pressure (tonnage) control
- Automatic lubrication system
- Electronically controlled filter contamination warning
- Hydraulic unit oil temperature and system status display on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHSP 400/150
Type: Steel construction, 8-slide H-frame press body
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 400 Tons
Capacity (Pot): 150 Tons
Moving Table Dimension: 1200 × 1500 mm
Fixed Table Dimension: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Ram Stroke: 1000 mm
Pot Stroke: 350 mm
Min. Daylight: 100 mm
Max. Daylight: 1100 mm
Stress Relief: Vibration stress relief
Welding Application: WPQR and WPS procedures accredited by TÜRK-AK
EN ISO 15614-1:2017
(Welding procedures are supervised by “welding coordination engineers" certified to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 37 kW – IE3
Main Pump: 45 cm³ – REXROTH or PARKER
Moving Table Fast Descent Speed: 150 mm/sec
Moving Table Spinning Speed: 12 mm/sec
Moving Table Return Speed: 170 mm/sec
Pot Table Forward Speed: 30 mm/sec
Main Cylinder Bore: Ø450 mm – Ck45
Pot Cylinder Bore: Ø280 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Height of Press: 5600 mm
Approx. Width of Press: 3250 mm
Approx. Depth of Press: 2200 mm
Height of Lower Table from Floor: 1400 mm
Pre-fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Panel: DELTA 7”
Electrical Components: SIEMENS – SCHNEIDER
Approximate Weight: 24 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annonse
Tyrkia
2 566 km
80/30 TON KOLONNETYPE HYDRAULISK DYPPRESS
CRONOSSTECHCHKSP 80/30
Tilstand: ny, Byggeår: 2025, pressekraft: 80 t, slagslengde: 500 mm, bordbredde: 700 mm, bordlengde: 700 mm, klaring mellom søylene: 700 mm, tilbaketrekkskraft: 30 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Spinning Press
General Description
The CRONOSSTECH 80/30 ton four-column hydraulic spinning press is an industrial press solution featuring a rigid four-column body, specifically engineered for metal spinning, deep drawing, and die testing applications that require high precision.
The St52-grade steel construction undergoes stress relief via vibration treatment, ensuring excellent parallelism and perpendicularity tolerances during pressing operations. The ram and pot systems operate independently, allowing for precise stroke and pressure adjustments via the operator panel.
Equipped with REXROTH or PARKER hydraulic components, IE3-class motors, and PLC-based control architecture, this press offers a durable, safe, and energy-efficient operation. The automated lubrication system and filter contamination alerts minimize maintenance requirements.
This model is ideal for small to medium-scale series production, die testing, and precision forming operations.
Key Advantages
- Rigid four-column press frame
- Independent stroke and tonnage control for ram and pot
- Full control via touch panel
- High repeatability and precision
- Low maintenance costs and long service life
Typical Applications
- Metal spinning processes
- Deep drawing operations
- Die testing and prototype production
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 80 tons
CAPACITY (POT): 30 tons
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 500 mm
STROKE (POT): 150 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 600 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING CERTIFICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
Nwedpfx Asx N Ultoqtoh
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 11 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVING TABLE FAST DOWN SPEED: 150 mm/s
MOVING TABLE SPINNING SPEED: 12 mm/s
MOVING TABLE RETURN SPEED: 170 mm/s
POT TABLE FORWARD SPEED: 30 mm/s
MAIN CYLINDER INNER DIAMETER: Ø 200 mm – Ck45
POT CYLINDER INNER DIAMETER: Ø 125 mm – Ck45
AUXILIARY SPEED CYLINDERS: 2 pcs
APPROXIMATE PRESS HEIGHT: 3300 mm
APPROXIMATE PRESS WIDTH: 1050 mm
APPROXIMATE PRESS DEPTH: 1050 mm
BOTTOM TABLE HEIGHT FROM GROUND: 1100 mm
PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION SYSTEM: Automatic (adjustable from the panel)
RAM / POT STROKE AND TONNAGE SETTING: Adjustable from the panel
SYSTEM & PRESS STATUS INFO: Viewable on screen
DIE MEMORY: Adjustable from the panel
LINEAR SCALE: NOVATECHNIK or TURCK
PLC: DELTA
TOUCH PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 5.5 tons
Annonse
Tyrkia
2 566 km
H-type 300/100 ton hydraulisk dypstrekkpresse
CRONOSSTECHCHSP 300/100
Tilstand: ny, Byggeår: 2025, pressekraft: 300 t, slagslengde: 800 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 100 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, RONOSSTECH CHSP 300/100
H-Type Hydraulic Deep Drawing (Metal Spinning) Press – 8-Guided Slides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke.
The CHSP 300/100 model, with a 300-ton main ram and a 100-ton cushion (pot) capacity, is designed for deep drawing and metal spinning applications requiring high tonnage. The machine body is stress-relieved by vibration to ensure long-term durability and reliable operation.
⚙️ Standard Equipment
- Steel construction, H-frame type press with 8 guided slides
- Vibration stress-relieved frame structure
- Bronze Zr14 slide bearings
- WPQR and WPS certified welds accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in accordance with CE standards
- PLC-controlled hydraulic system
- Touch screen panel (DELTA 7”)
- Adjustable ram and cushion (pot) stroke control
- Adjustable ram and cushion (pot) tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Hydraulic unit oil temperature and system status monitoring on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 300/100
Type: Steel construction, H-frame press with 8 guided slides
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 300 Ton
Capacity (Cushion): 100 Ton
Movable Table Size: 1200 × 1500 mm
Njdpfx Aox N Uhbeqtewh
Fixed Table Size: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 800 mm
Stroke (Cushion): 300 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Weld Stress Relief: Vibration stress relief
Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017
(Welding supervised by “welding coordination engineers” certified according to EN ISO 14731)
Max. Operating Pressure: 250 Bar
Total Motor Power: 37 kW – IE3
Main Pump: 45 cm³ – REXROTH or PARKER
Movable Table Rapid Descent Speed: 150 mm/s
Movable Table Drawing Speed: 12 mm/s
Movable Table Return Speed: 170 mm/s
Cushion Table Advance Speed: 30 mm/s
Main Cylinder Inner Diameter: Ø390 mm – Ck45
Cushion Cylinder Inner Diameter: Ø230 mm – Ck45
Auxiliary Fast Advance Cylinders: 2 units
Approximate Height of Press: 4400 mm
Approximate Width of Press: 3250 mm
Approximate Depth of Press: 2200 mm
Height of Lower Table from Floor: 1350 mm
Pre-Fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel Screen: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 21 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annonse
Tyrkia
2 566 km
H-type 250/80 ton hydraulisk dypstrekkpresse
CRONOSSTECHCHSP 250/80
Tilstand: ny, Byggeår: 2025, pressekraft: 250 t, slagslengde: 800 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 80 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 250/80
H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways
Nwedpfex N Uaqsx Aqtjh
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its 8-guided H-frame structure, the press ensures maximum rigidity during operation; parallelism and perpendicularity tolerances are stably maintained throughout the stroke.
The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton bottom cushion (pot), is designed for medium to high tonnage deep drawing and forming operations. The frame construction is stress-relieved via vibration methods, aiming for long-lasting and reliable performance.
⚙️ Standard Equipment
- Steel construction, H-frame body with 8 slideways
- Vibration stress-relieved frame structure
- Zr14 Bronze slideway bushings
- WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing compliant with CE standards
- PLC-controlled hydraulic system
- Touchscreen panel (DELTA 7”)
- Adjustable ram and cushion (pot) stroke control
- Adjustable ram and cushion (pot) tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning system
- Hydraulic unit oil temperature and system status monitoring on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHSP 250/80
- Type: Steel construction, H-frame body with 8 slideways
- Frame Material: St52 – ERDEMİR
- Slideway Bushings: Zr14 Bronze
- Capacity (Ram): 250 Tons
- Capacity (Cushion/Pot): 80 Tons
- Movable Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/m
- Perpendicularity Tolerance: 60 micron/m
- Stroke (Ram): 800 mm
- Stroke (Cushion/Pot): 300 mm
- Min. Daylight: 100 mm
- Max. Daylight: 900 mm
- Stress Relieving: Vibration stress relief
- Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731)
- Max Working Pressure: 250 Bar
- Total Installed Motor Power: 37 kW – IE3
- Main Pump: 45 cm³ – REXROTH or PARKER
- Movable Table Fast Descent Speed: 150 mm/sec
- Movable Table Forming Speed: 12 mm/sec
- Movable Table Return Speed: 170 mm/sec
- Cushion Forward Speed: 30 mm/sec
- Main Cylinder Bore: Ø360 mm – Ck45
- Cushion Cylinder Bore: Ø200 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Height: 4200 mm
- Approx. Width: 3250 mm
- Approx. Depth: 2200 mm
- Bottom Table Height from Floor: 1350 mm
- Pre-fill Valve: NG 125
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Position Sensor: NOVATECHNIK or TURCK
- PLC: DELTA
- Touchscreen Panel: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approximate Weight: 18 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annonse
Tyrkia
2 566 km
H-type 600/200 ton hydraulisk dyp trekking
CRONOSSTECHCHSP 600/200
Tilstand: ny, Byggeår: 2025, pressekraft: 600 t, slagslengde: 1 000 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 200 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 600/200
H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning operations. The 8-guide H-frame structure provides maximum rigidity throughout the pressing cycle; parallelism and perpendicularity tolerances are consistently maintained over long strokes.
The CHSP 600/200 model, with a 600-ton main ram and 200-ton cushion (pot) capacity, is designed to provide full control over the die and part in high-tonnage deep drawing and spinning operations. The frame construction has been stress-relieved by vibration for long-lasting and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-guide H-frame press body
- Vibration-stress-relieved frame structure
- Bronze Zr14 guide bushings
- Welding applications approved by WPQR and WPS, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in accordance with CE standards
- PLC-controlled hydraulic system
- Touch screen panel (DELTA 7”)
- Adjustable main ram and cushion stroke control
- Adjustable main ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Monitoring of hydraulic unit oil temperature and system status on display
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear
📐 Technical Specifications – CHSP 600/200
Type: Steel construction, 8-guide H-frame press body
Frame Material: St52 – ERDEMİR
Guide Bushings: Bronze Zr14
Main Ram Capacity: 600 Ton
Cushion (Pot) Capacity: 200 Ton
Movable Table Size: 1200 × 1500 mm
Fixed Table Size: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 1000 mm
Stroke (Cushion): 350 mm
Min. Daylight: 100 mm
Max. Daylight: 1100 mm
Stress Relief: By vibration
Welding Application: WPQR and WPS, TÜRK-AK accredited, EN ISO 15614-1:2017
(Welding operations are supervised by "welding coordination engineers" certified as per EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 55 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Movable Table Rapid Down Speed: 150 mm/s
Movable Table Drawing Speed: 12 mm/s
Movable Table Return Speed: 170 mm/s
Cushion Forward Speed: 30 mm/s
Main Cylinder Bore: Ø550 mm – Ck45
Cushion Cylinder Bore: Ø320 mm – Ck45
Nwjdpox N Uhzofx Aqtoh
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 5900 mm
Approx. Press Width: 3250 mm
Approx. Press Depth: 2300 mm
Lower Table Height from Floor: 1400 mm
Pre-fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Encoder: NOVATECHNIK or TURCK
PLC: DELTA
Touch Screen: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approximate Weight: 35 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annonse
Tyrkia
2 566 km
H-type 600 tonns enkelvirkende hydraulisk presse
CRONOSSTECHCHP 600
Tilstand: ny, Byggeår: 2025, pressekraft: 600 t, slagslengde: 800 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 600
H-Type Single-Acting Hydraulic Press – 8-Guided Slides
General Description
The CRONOSSTECH CHP Series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guided H-frame structure ensures balanced distribution of high forces generated during pressing, offering long-lasting and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage.
CHP Series – Structural Features
CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting components are stress-relieved via vibration methods. Bronze Zr14 slideway bearings ensure even load distribution and high precision throughout ram movement.
⚙️ Standard Equipment
- Steel construction, H-type press frame with 8 guided slides
- Frame structure stress-relieved by vibration
- Bronze Zr14 slideway bearings
- Welding applications approved by WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in accordance with CE standards
- PLC-controlled hydraulic system
- Touch panel display (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- Real-time monitoring of hydraulic unit oil temperature and system status on the display
- Cooling system
- Off-line filtration
- Dual-hand control system
- Light barrier (standard for operator safety)
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHP 600
Type: Steel construction, 8-slideway H-frame press
Frame Material: St52 – ERDEMİR
Nwjdpfx Aqjx N T Iastjh
Slideway Bearings: Bronze Zr14
Capacity (Ram): 600 Ton
Moving Table Dimensions: 1200 × 1500 mm
Fixed Table Dimensions: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 800 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Stress Relieving: Vibrational stress relief
Welding Application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 certified welding application (monitored by certified welding coordination engineers according to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 55 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Moving Table Rapid Descent Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Main Cylinder Bore: Ø550 mm – Ck45
Pot Cylinder Bore: Ø320 mm – Ck45
Auxiliary Acceleration Cylinders: 2 pcs
Approximate Height of Press: 5900 mm
Approximate Width of Press: 3250 mm
Approximate Depth of Press: 2300 mm
Lower Table Height from Ground: 1400 mm
Pre-fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Measurement Scale: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel Display: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 28 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annonse
Tyrkia
2 566 km
H-type 200/70 tonns hydraulisk dyptrekkpresse
CRONOSSTECHCHSP 200/70
Tilstand: ny, Byggeår: 2025, pressekraft: 200 t, slagslengde: 800 mm, bordbredde: 1 000 mm, bordlengde: 1 200 mm, tilbaketrekkskraft: 70 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 200/70
H-Type Hydraulic Deep Drawing (Metal Forming) Press – 8-Guided Slides
General Description
The CRONOSSTECH CHSP Series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal forming (spinning) applications. The 8-slide H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke.
The CHSP 200/70 model, with its 200-ton main ram and 70-ton cushion (pot) capacity, is designed for deep drawing and metal forming operations requiring medium-high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-slide H-frame type press body
- Stress-relieved frame by vibration
- Bronze Zr14 slide bearings
- WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing compliant with CE standards
- PLC-controlled hydraulic system
- Touch panel screen (DELTA 7”)
- Adjustable stroke control for ram and cushion
- Adjustable tonnage (pressure) control for ram and cushion
- Automatic lubrication system
- Electronically monitored filter contamination warning
- Display of hydraulic unit oil temperature and system status on screen
- Cooling system
- Offline filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHSP 200/70
Type: Steel construction, 8-slide H-frame press body
Frame Material: St52 – ERDEMİR
Slide Bearing: Bronze Zr14
Capacity (Ram): 200 Ton
Capacity (Cushion/Pot): 70 Ton
Moving Table Dimensions: 1000 × 1200 mm
Fixed Table Dimensions: 1000 × 1200 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Ram Stroke: 800 mm
Cushion Stroke: 300 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Stress Relieving: Vibration method
Welding Application: WPQR and WPS approved by TÜRK-AK
EN ISO 15614-1/2017
(Welding applications inspected by certified “welding coordination engineers” in accordance with EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 22 kW – IE3
Main Pump: 32 cm³ – REXROTH or PARKER
Moving Table Fast Down Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Cushion Table Forward Speed: 30 mm/s
Main Cylinder Bore: Ø320 mm – Ck45
Cushion Cylinder Bore: Ø190 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Height: 3800 mm
Approx. Width: 2950 mm
Approx. Depth: 2200 mm
Lower Table Height from Floor: 1350 mm
Pre-fill Valve: NG 125
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Offline Filtration: REXROTH or PARKER
Linear Position Scale: NOVATECHNIK or TURCK
Nwodpfxox N T U Te Aqteh
PLC Application: DELTA
Touch Panel Screen: DELTA 7”
Electrical Components: SIEMENS – SCHNEIDER
Approximate Weight: 13.5 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Vi gjør det enklere for deg å søke: "potet"
Du får nye tilbud på e-post umiddelbart og gratis.
Du kan når som helst enkelt avslutte søkeoppdraget.
Brukt Potet (166)
Søk nå gjennom hele Machineseeker med mer enn 200 000 brukte maskiner.Bla gjennom de mest populære maskinbetegnelsene:

Få informasjon nå
+44 20 806 810 84
+44 20 806 810 84
Legg inn annonse nå
*per annonse/måned












































































