Kjøp brukt Pizzadeig Sheeter (333)
Sorter resultater
- Laveste pris Høyeste pris
- Nyeste annonser Eldste annonser
- Korteste avstand Største avstand
- Nyeste produksjonsår Eldste produksjonsår
- Siste oppdatering Eldste oppdatering
- Produsenter fra A til Å Produsent fra Z til A
- relevans
- Laveste pris
- pris
- Høyeste pris
- pris
- Nyeste annonser
- Innstillingsdato
- Eldste annonser
- Innstillingsdato
- Korteste avstand
- avstand
- Største avstand
- avstand
- Nyeste produksjonsår
- produksjonsår
- Eldste produksjonsår
- produksjonsår
- Siste oppdatering
- oppdatering
- Eldste oppdatering
- oppdatering
- Produsenter fra A til Å
- produsent
- Produsent fra Z til A
- produsent
- Betegnelse fra A til Å
- Betegnelse
- Betegnelse fra Z til A
- Betegnelse
- Modell fra A til Å
- Modell
- Modell fra Z til A
- Modell
- Laveste referanse
- referanse
- Høyeste referanse
- referanse
- Korteste driftstid
- Driftstid
- Lengste driftstid
- Driftstid
- relevans
- relevans
Annonse
Tarnock
1 243 km
Lakkert deigfettpresse
Seewer RondoFGDISA/R.A
Ring
Tilstand: god (brukt), Byggeår: 1997, maskin-/kjøretøynummer: B7179007, REF: MM6260
Lhjdpfx Ajxqg Dhocvon
1 x Seewer Rondo lakkert deig-fettpresse.
Tekniske spesifikasjoner ⚙️
✅ Modell – FGDISA/R.A.
✅ Serienummer – B7179007.
✅ Produksjonsår – 1997.
✅ Presskammer dimensjoner – 510 mm bredde x 409 mm lengde/dybde.
✅ Totale dimensjoner – 650 mm bredde x 630 mm lengde/dybde x 1140 mm høyde (1600 mm høyde med åpent lokk).
✅ Elektriske krav – 380 V / 50 Hz / 3 fase.
Annonse
Berlin
935 km
Splashback
Feige
Ring
Tilstand: god (brukt), Byggeår: 2023, - Housing made from galvanized sheet steel; the individual elements are bolted together
- The rear interior side is fitted with sound insulation and a perforated plate in front
- Paint mist is separated from the exhaust air using approved pleated cardboard filters with fiberglass filters in the second filtration stage (99% separation efficiency depending on the paint system)
- The high-performance filters installed in the front have 3–5 times greater paint absorption capacity compared to glass fiber mats and can be easily removed and disposed of during filter changes
- Exhaust duct diameter: 1 x 500 mm
- Extraction capacity: 1 x 7200 m³/h
- Motor power: 1.5 kW ex-proof
- Noise level: approx. 78 dB(A) with standard motor installation on the extraction unit
- Wall duct NW 500
- L = 500 mm (450/50) sheet metal plate approx. 600 mm diameter, round
- 2nd cover plate loose
Ledsxlq Adepfx Acvehn
- 45° wall outlet spigot with grille
- Socket connection for hose or pipe NW 500
Price: Please submit your binding offer
Available from: Immediately
Terms of delivery: Ex works
Terms of payment: Payment prior to collection
Accessories without warranty. Validity: “As is, as inspected.” The prospective buyer must verify the completeness of the item on site.
Annonse
Möckmühl
1 245 km
Termoforming maskin
ILLIGUA 250 4G BE 250 PR FHZ
Ring
Tilstand: brukt, Byggeår: 2007, Funksjonalitet: fullt funksjonell, filmbredde: 1 500 mm, Tekniske data:
- Maks. materialstørrelse: 2500 x 1500 mm
- Maks. formflate: 2450 x 1450 mm
- Maks. trekkdybde: 700 mm
- Maks. materialtykkelse: 12 mm
Utstyr:
Formstasjon
- Siemens S7-styring
- Helautomatisk oppsettfunksjon
- Overvarme med 7 pilotstrålere via S7-skjerm joystick (motorisert bevegelsesbane)
- Undervarme med 7 pilotstrålere via S7-skjerm joystick (motorisert bevegelsesbane)
- Berøringsfri strålerstyring (solid state relay)
- Overstempelanlegg med synkron bevegelse (hydraulisk justerbar)
- Klemeramme (hydraulisk justerbar)
- Verktøybord (hydraulisk justerbar)
- Sentral kjøleenhet via frisklufttilførsel
- Tredobbelt filmhengkontroll med automatisk støtteblåsefunksjon
- Tredobbelt verktøykontroll
- Automatisk tømming av blåsekassen
- Hurtigskifte av form, klemeramme og forstrekkstempel i én pakke, full- og halvautomatisk drift
- Formverktøy kan trekkes ut gjennom frontklaff
- Formvakuumovervåking
- Forblåsautomatikk via forblåsetid
- Automatisk grunninnstilling med selvoptimalisering av strålertemperaturer
- Innstilling for oppvarming, kjøling og prosessforløp
- Syklustidsberegning for alle utvidelsestrinn
Lhedpfx Acsft S Eaevsn
- Posisjonsmålesystem for bordplassering
- Temperering av klemeramme, overstempel og verktøy
- Lagring av programmer og varmeinnstillinger
- Underramme for rammeinnbygging nedenfra, sentral klemming via elektromotor
- Kaskade for vakuum, forblåsing, formutløsing, verktøybord, overstempel
- Variabel hastighet på verktøybord, overstempel, klemeramme
- Pneumatisk låsbar frontdør
- Hovedstrømskap med klimaanlegg
Automatisk plate- og rullmater
- Filmavspiller med innsettingsanordning og pneumatisk brems
- Automatisk sentrering i platemagasin (motorisert justering)
- Overvarme kan brukes som forvarmer eller sluttvarmer (motorisert bevegelsesbane)
- Undervarme kan brukes som forvarmer eller sluttvarmer (motorisert bevegelsesbane)
- Plateheis motorisert
- Vakuumpumpe for preget materiale
- Materialtransport via transportkjede og rullebane for bedre transport, også ved tynnere materiale
Valgfrie tilleggsutstyr tilgjengelig på forespørsel

Få informasjon nå
+44 20 806 810 84
+44 20 806 810 84
Legg inn annonse nå
*per annonse/måned
Annonse
Tarnów Grodkowski
1 221 km
Plasmaplotter MTX 1530 ventilert
Martex CncMTX 1530
Ring
Byggeår: 2023, Tilstand: ny, PLASMA CUTTING PLOTTER MODEL MTX 1530, Ventilated
Construction: steel + aluminium
Working area: 3000 x 1500 x 200 mm
XY axis drive: dual-sided gantry drive – stepper motors 4Nm with gearboxes, rack and pinion
Z axis drive: stepper motor, ball screw
Lhjdjnfvlgopfx Acven
Travel speed: up to 25 m/min
Z axis control system: THC My Plasm system
Linear guides: Hiwin
Cable guides: IGUS
Automatic material detection system
Power supply: 240V
Permissible load: 1,800 kg
Net weight: 800 kg
USB port for opening projects and transferring files using external pen drives
Sheet detection system
THC cutting height control system
Hiwin linear guides
Dual-sided gantry drive:
- X axis: stepper motor and rack and pinion
- Y axis: stepper motor and rack and pinion
- Z axis: stepper motor and ball screw
All drives run on Hiwin rails
Ventilated table prepared for fume extraction
INCLUDED IN THE SET:
- Ventilated table
- Control software in Polish
- CE declaration of conformity
- User and technical documentation (DTR)
- Warranty
- Commissioning and operator training included in the price
The newest control system in our plotter range:
- Integrated THC height controller
- Torch anti-crash function
- Accepted file types: DXF, PLT (HPGL), G-Codes (.tap)
- Integrated CAM module: MyMini CAM
- Automatic recognition of internal/external objects
- Path lookahead
- Cutting parameter database
- Project angle-to-material correction
- Cut from any location
- Cut from the end
- DXF/PLT import
- Automatic offset path generation, lead-in/lead-out
- Compatible with external CAM software
- Separate speed settings for holes
- Parameter base
- Project-to-material alignment correction
- Soft and hardware limits
- Anti-dive THC functions
- GamePad control option
- Material detection using touch system, floating head
WHY IT'S WORTH CHOOSING US:
WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES
CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER)
PROFESSIONAL GUIDES BY RENOWNED BRAND HIWIN – ENSURING LONG LIFESPAN & HIGH CUTTING QUALITY REQUIRING NO FURTHER PROCESSING
COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HANDLES, ETC. MANUFACTURED IN-HOUSE USING CNC TECHNOLOGY – ENSURING HIGH QUALITY AND REPEATABILITY
OUR ADVANTAGES:
- HIGH-QUALITY SHIELDED CABLES
- INDUCTIVE SENSORS ON ALL AXES – DUST & JAM RESISTANT
- ADVANCED MY PLASM THC – SMOOTH TORCH OPERATION
- CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) INSTALLED IN CUTTING MACHINES
- WE INSTALL CUSTOMER-SUPPLIED CUTTERS OR PROCURE CUTTERS ACCORDING TO CLIENT REQUIREMENTS
- ASSISTANCE WITH LEASING ARRANGEMENTS
- POSSIBILITY TO SELECT A CUTTER ACCORDING TO THE SPECIFIC NEEDS OF YOUR BUSINESS
We offer tables in various other sizes.
Annonse
Ahaus
938 km
Svingbar bøyemaskin
SCHROEDERSPB 3200/3.0
Ring
Tilstand: god (brukt), Byggeår: 2002, Plate width 3220 mm
Sheet thickness 3.0 mm (mild steel)
Sheet thickness for stainless steel 2.0 mm
Upper beam adjustment 300 mm
Adjustment speed 100 mm/sec
Bending beam adjustment 80.0 mm
Bending speed 120°/sec
Working height 869 mm
Backgauge – adjustable 1.0 – 1500 mm
Compressed air supply 6.0 bar
Controller POS 2000
Total power requirement ~ 8.8 kW
Voltage 400 V
Weight 4380 kg
Dimensions L×W×H 4575 × 2450 × 1737 mm
New price incl. accessories approx. €110,000
From a maintenance workshop
Well-maintained condition (!!)
- in inspected condition – machine video –
Lhodpfsxcp N Rjx Acvsn
?v=8jPsMSxC6pU
Equipment:
- Motorized universal folding machine "SERVO POWER BEND"
* High-precision mechanics with state-of-the-art control technology
* Suitable for single-piece and series production
* Robust high-speed operation with fast axis movement
* Torsion-resistant welded steel frame
- SCHRÖDER CNC controller model "POS 2000"
* with touch screen control panel
* Color display
* USB interface
* Automatic cutting calculation
* Material and tool library
* Dimensionally accurate bending simulation
* Operating system Windows XP
- Servo-inverter driven drives
* for bending/upper beam & electronic backgauge
- CNC electro-motorized lower beam adjustment
- CNC electro-motorized backgauge
* Travel speed 300 mm/sec.
- with rear sheet support table, including ball casters
- 1x movable double foot switch
- 2x emergency stop buttons (front)
- Operating manual (PDF)
* Special accessories included:
- 1x segmented lower bending rail (installed)
- 1x extra bending rail 25.0 mm
- 1x extra bending rail 10.0 mm
- 1x extra top bending tool – VEE
- 1x extra segmented top bending tool – GOOSENECK
* Tool height 170 mm
Annonse
Heidenheim an der Brenz
1 318 km
Plasmakutter
ElettroPlasma 1050 LCD Inverter
Ring
Tilstand: som ny (utstillingsmaskin), Byggeår: 2022, driftstimer: 1 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 285033, type innstrømsstrøm: trefaset, inngangsspenning: 400 V, type kjøling: luft, totalvekt: 25 kg, elektrisk sikring: 32 A, skjærestrøm: 105 A, slangepakkelengde: 6 000 mm, maks. platetykkelse stål: 50 mm, luftbehov: 15 m³/t, lufttrykk: 5,8 stang, beskyttelsestype (IP-kode): IP23, produktets høyde (maks.): 50 mm, High-end plasma cutting machine for manual cutting applications. Although the system is equipped with a hand-held cutting torch, it can also be used for mechanized cutting. The CNC interface is already integrated.
Ledpfx Acorq E R Ujvjhn
The scope of delivery includes the hand-held cutting torch with a 6-meter length.
The unit was operated in our application center for demonstration purposes. In total, the system has less than 30 minutes of cutting time. More technical information can be found in the attached document/data sheet.
Annonse
Tarnock
1 243 km
Rustfritt stål deigfet presse
RondoFGDISA/R DO
Ring
Tilstand: svært god (brukt), Byggeår: 2003, maskin-/kjøretøynummer: C3484403, REF: MM6259
1 x Rondo Doge deig-/fettpresse i rustfritt stål.
Tekniske spesifikasjoner ⚙️
Ledjxqguaspfx Acvehn
✅ Modell – FGDISA/R DO.
✅ Serienummer – C3484403.
✅ Produksjonsår – 2003.
✅ Pressekammermål – 512 mm bredde x 409 mm lengde/dybde x 135 mm høyde.
✅ Totale mål – 670 mm bredde x 710 mm lengde/dybde x 1170 mm høyde (1560 mm høyde med åpent lokk).
✅ Elektrisk tilkobling – 420 V / 50 Hz / 3-fas.
Annonse
Ensheim
1 188 km
Digital utskriftsmaskin
CanonimagePress C710
Ring
Tilstand: god (brukt), Byggeår: 2022, Tekniske data:
• Operation Attention Light-D1
• Duplex Color Image Reader Unit-M2
• Auto Gradation Sensor-A1
• Sensing Unit-A1
• i1 Process Control v5.3
• Multi-drawer Paper Deck-D1
• Paper Deck Double Feeding Detection Kit-B1
• Envelope Feeder Attachment-H1
• Long Sheet Tray-B1
• Stack Bypass-C1
• Stack Bypass Alignment Tray-D1
• Booklet Finisher-W1 Pro
• Paper Deck Path Kit-A1
• Operating Panel-A5
• Operator Panel Attachment Kit-B4
• PRISMAprepare V8 Model Full
• PRISMAPREPARE BASE
• PRISMAprepare V8 – første samtidige bruker
• PRISMAprepare V8 ID Resale
• PRISMAprepare V8 – Automatisering
• PRISMAprepare V8 – Preflight
• PRISMAprepare V8 – Avansert utskyting (Adv. Imposition)
• PRISMAprepare V8 – Spot Color Editing
Lhjdpfexnxrfox Acven
Tilbehør:
• Finisher
• PRISMAsync Controller
• Workflow PrismaPrepare
Leveringsbetingelser: EXW (55232 Alzey)
Betalingsbetingelser: Betaling før henting
Tilbehør selges uten garanti. Gjelder: «Objektet kjøpes som besett». Kjøper plikter å forsikre seg om objektets fullstendighet ved befaring på stedet.
Vi tilbyr gjerne leasingalternativ for kunder med firmaadresse i Tyskland.
Annonse
Würzburg
1 192 km
Båndkurvetransportør 45° venstre (båndkurve)
Transnorm670-500 IR1100
Ring
Tilstand: brukt, Byggeår: 2017, Transnorm Belt Curve Conveyor 45° Left 670-500 IR1100
Ledpsk Aa Dtefx Acvohn
RA1083
The Transnorm belt curve is from 2017. It is in like-new condition (used) and fully functional. It is equipped with a motor from SEW. Supports are not included in the scope of delivery but are optionally available.
Belt curves are widely used in intralogistics for in-house transport of unit loads and are an essential part of modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness.
Technical specifications:
Manufacturer: Transnorm
Type: TS 1600-105 FH2 Belt Curve 45° Left
Year of manufacture: 2017
Condition: like new (used)
Motor: fully functional
Angle: 45°
Direction of travel: left
Inner radius (IR): 1100 mm
Nominal/outer width (NB): 670 mm
Usable width (NUB): 500 mm
Side guide: external sheet steel
Drive: SEW geared motor
Drive position: outer, pulling
Weight: 120 kg
Scope of delivery: without supports (please inquire if required)
Optional: supports
Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg
For individual, professional consulting, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact for intralogistics
Annonse
Tarnów Grodkowski
1 221 km
Plasmaplotter MTX 2030
Martex CncMTX 2030
Ring
Byggeår: 2023, Tilstand: ny, PLASMA PLOTTER MODEL MTX 2030
Construction: steel + aluminum
Working area: 3000/2000/200 mm
XY axis dual-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion
Z axis drive: stepper motor with ball screw
Travel speed: up to 25 m/min
Z-axis control system: THC My plasm system
Linear guides: HIWIN
Cable carrier: IGUS
Automatic material detection system
Power supply: 240V
Permissible load: 2000 kg
Net weight: 800 kg
USB port for opening projects and transferring files via external pen drives
Sheet metal detection system
THC cutting height control system
HIWIN linear guides
Dual-sided gantry drive:
– X axis: stepper motor and rack & pinion
– Y axis: stepper motor and rack & pinion
– Z axis: stepper motor and ball screw
Drives are implemented using Hiwin brand rails
The table is equipped with a water grate (water table provides cleaner cuts, material cooling, and reduces gas emissions during processing)
INCLUDED:
– water table
– exchangeable grate
– control software in Polish
– CE declaration of conformity
– Technical Documentation (DTR)
– Warranty
– Commissioning and training included in price
The latest control system featured in our plotters:
– Integrated THC height controller
– Torch anti-diving function
– Accepted file types: DXF, PLT (hpgl), G-Codes (.tap)
– Integrated CAM module: MyMini CAM
– Automatic recognition of internal/external objects
– Path pre-analysis
– Cutting parameters database
– Project angle correction to material position
– Cutting from any point
– Cut from end
– Import DXF, PLT
– Automated generation of offset paths, entries, and exits
– Software can be used with external CAM programs
– Separate speed for holes
– Parameter database
– Project correction according to material rotation
– Software & hardware limits
– THC anti-diving functions
– Gamepad control capability
Ledpfonfu Tlsx Acvshn
– Material detection via touch system, floating head
WHY CHOOSE US
– WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS
– CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER)
– PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY, KNOWN FOR LONG SERVICE LIFE AND HIGH CUTTING QUALITY THAT REQUIRES NO FURTHER MACHINING
– COMPONENTS SUCH AS GEARBOXES, MOUNTS, HOLDERS, ETC., MANUFACTURED BY US USING CNC TECHNOLOGY, ENSURING HIGH QUALITY AND REPEATABILITY
OUR STRENGTHS
– HIGH-QUALITY SHIELDED CABLES
– INDUCTIVE SENSORS ON ALL AXES, RESISTANT TO DUST AND JAMMING
– ADVANCED THC MY PLASM FOR SMOOTH TORCH OPERATION
– CPC INTERFACE (VOLTAGE DIVIDER INTERFACE) INSTALLED IN CUTTERS
– WE CAN INSTALL CLIENT-SUPPLIED CUTTERS OR SOURCE MACHINES THAT MEET CUSTOMER REQUIREMENTS
– ASSISTANCE WITH LEASING ARRANGEMENTS
– Ability to select an appropriate cutter for the specific needs of your business
Other table sizes available in our offer.
Annonse
Bydgoszcz
1 003 km
Laser 3kW | Rotator 6000x220mm
OtinusFLV-3015-CT-6022 3kW
Ring
Tilstand: ny, Byggeår: 2024, Fiber Laser Cutting System FLV-3015-CT-6022 3kW / VF1530-3000W
Technical Parameters
- Maximum sheet dimensions: 3000 x 1500 mm
- Maximum profile height: 220 mm
- Maximum profile length: 6000 mm
- X and Y axis positioning accuracy: ± 0.05 mm/m
- Repeatable positioning accuracy of X and Y axes: ±0.03 mm
- Maximum speed: 120,000 mm/min
- Maximum acceleration: 1.5G
- Power output: 3.0 kW
- Source brand: Choice of Raycus or MAX Photonics
- Power supply: ~3x400 V 50 Hz
Cutting Depth:
- Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm
- Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm
- Aluminium: recommended depth 6.0 mm, maximum depth 8.0 mm
- Brass: recommended depth 5.0 mm, maximum depth 6.0 mm
Rotator for Profile Cutting
The machine is equipped with a rotator for profile cutting.
- Maximum length of profile to be processed: 6000 mm
- Profile clamping bracket diameter: 220 mm
Automatic lubrication system for axis guides.
Convenient Operation
Loading of heavy sheets is facilitated by transport balls embedded in the table top, ensuring smooth sliding during loading. Picking up small finished parts is also much easier thanks to drawers located under the machine, which can be accessed by pulling on a practical handle.
RayTools Cutting Head with Autofocus
Otinus Protect (optional*)
This product offers individual protection for your laser source. With this service, you can ensure the work continuity of your business. We secure your operations so you can complete orders on schedule.
Voltage Stabiliser (optional*)
Control Panel
The computer operates on Windows 10, equipped with CypCut software for processing, supporting functions such as design, file import/export, and workflow optimization. All installed programs come with lifetime licenses.
The machine is supplied with a wireless controller.
Professional Support
We ensure continuous communication with our customers. That is why, with the purchase of a machine, we provide an hourly package of professional support from Otinus technicians.
Otinus Academy Learning Software
Upon purchasing this machine, you receive one-year access to online courses, allowing you to seamlessly onboard new staff or refresh knowledge from prior training!
Scope of Supply
- Three-day training and machine installation
- Days 1 and 2: up to 8 hours each – commissioning and control system training
- Day 3: up to 8 hours – independent operation with supervision from our technician, including the ability to program specific parts.
- Consultation from our specialists
- By phone: 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months
Lodpfx Aophpi Ejcvohn
- Online: 7:30 to 14:30 (Mon-Fri) – an 8-hour package to be used within 12 months
- Access to Otinus Academy online courses
- LibreCad – access for 12 months
Additionally, you receive:
Annonse
Siemianowice Śląskie
1 308 km
Automatisk valseverk
FritschRollfix
Ring
Tilstand: god (brukt), Byggeår: 2009, Automatisk rullemaskin Fritsch Rollfix
- modell 600/650
- brukt
- produksjonsår 2009
- automatisk deigrulling
- automatisk drysser
- datastyrt
Lhedpfoxpg I Dox Acven
- maskin fra produksjon
- teknisk kontrollert
- henting fra lager/frakt mulig
- pris på forespørsel
Annonse
Velen
961 km
Hakkemaskin
DMF4U - 250
Ring
Byggeår: 1981, Tilstand: brukt, Plate thickness: 4 mm
Blade length: 250 mm
Angle adjustable from - up to fixed 90 degrees
Table size: 900 x 800 mm
Lhsdpop U Utfefx Acvsn
Total power requirement: kW
Machine weight approx. 0.65 t
Dimensions (L x W x H): 1.2 x 0.9 x 1.1 m
Hydraulic notching machine
- Foot switch
- 2 sheet metal stops
Annonse
Rzeszów
1 440 km
Croissantmaskin
FritschCTR
Ring
Tilstand: svært god (brukt), Byggeår: 2010, 199 BRUKT Fritsch CTR croissant/rundstykke kuttemaskin.
Produksjonsår: 2010.
Maskinen har ikke rullefunksjon.
Lhjdsxqdwxepfx Acvjn
UTSTYR:
- Kuttehode for 5 croissanter samtidig.
Oppgitt pris er netto pris.
VI SNAKKER ENGELSK, TYSK, FRANSK, RUSSISK, UKRAINSK.
I vårt tilbud finner du bakerovner, vognovner, etasjeovner, konditoriovner, butikkovner, bakerimaskiner, brødbånd, rundstykkeanlegg, deiglinjer, croissantlinjer, baguettmaskiner, eltemaskiner, miksere, kjevlemaskiner, croissantmaskiner.
Se alle våre annonser.
Annonse
Ahaus
938 km
Svingbar bøyemaskin
SCHROEDERMPB 2500/2.5
Ring
Tilstand: god (brukt), Byggeår: 2003, Plate width: 2520 mm
Sheet thickness: 2.50 mm (ST)
Sheet thickness for stainless steel: 1.50 mm
Upper beam adjustment: 160 mm
Adjustment speed: 100 mm/sec
Bending beam adjustment: 80.0 mm
Bending speed: 120 degrees/sec
Compressed air: 6.0 bar
Working height: 869 mm
Control: POS 2000
Voltage: 400 V
Total power requirement: 7.2 kW
Weight: 3430 kg
Dimensions (L x W x H): 4120 x 2400 x 2090 mm
Current new price: ~ 100,000 Euro
From a maintenance workshop
With very good equipment (!!)
Equipment:
- CNC electric-motor universal folding bending machine
* High-precision mechanics with modern control technology
* For single and series production
* Robust high-speed machine with high axis speeds
* Torsion-free welded construction
- Rotatable upper beam / functions as automatic tool changing system
* With 2x tool stations (sharp and segmented gooseneck bending rail)
* Reduces setup and idle times
* Eliminates time-consuming tool change and adjustment
- SCHRÖDER CNC control model POS 2000
* Operator panel front right (operable with PC mouse)
* Color display
* USB interface
* Automatic cutting calculation
Ljdsxbh Eujpfx Acvshn
* Material and tool library
* Precise bending simulation
* Operating system: Windows XP
* Swiveling operation, front right
- Servo inverter-controlled drives
* For bending/upper beam and electric backgauge
- CNC motor-driven lower beam adjustment
- CNC electric-motor backgauge
* Travel speed 300 mm/sec
- With rear sheet support table, including ball rollers
- 1x free-moving double foot switch
- Operating manual (PDF)
Annonse
Tyskland
1 043 km
Samling
HorizonVAC-100 + Stacker ST-20R
Ring
Tilstand: brukt, - Collating Tower VAC-100a
Horizon VAC-100a
Vacuum Air Collators
- Technology: Touch & Work
- Model: Suction and Blower Air Collating Tower
- Number of Stations: 10 per collating tower
- Error Prevention: Miss, double sheet, and jam detection
Lhodpfov Haalox Acvon
- Job Memory: 9 memory slots for repeat jobs
- Expandability: Up to 6 towers (60 stations)
Programs:
- Double cycle (non-stop operation)
- Insertion (single and double)
- Booklet program
- Block program
- Selective collating
- Format: max. 500 x 350 mm; min. 148 x 120 mm
- Paper weight: 40–250 gsm
- Loading capacity: 55 mm/station
- Output: Up to 9,500 sets/h
- Power: 230V/50Hz – 1.86 kW
- Dimensions: 842 x 652 x 1,961 mm
- Weight: 310 kg
Includes one stacker
Format: 500 x 350 mm
Equipment:
HORIZON stack lowering table / right-hand delivery, ST-20R
Collating tower VAC-100a
Technology: Touch & Work
Model: Suction and blower air collating tower
Number of stations: 10 per collating tower
Error prevention: Miss, double sheet, and jam detection
Job memory: 9 memory slots for repeat jobs
Expandability: Up to 6 towers (60 stations)
Stacking options: flat or offset piling
Annonse
Aalen
1 302 km
Bore- og dybelinnsettingsmaskin
GÖTZINGERPower Drill -300 Video -
Ring
Tilstand: ny, Bore diameter variable, mm
Number of horizontal drilling heads: 3 pcs
Number of vertical drilling heads: 4 pcs
Dimensions (L/W/H): 6100 x 1500 x 2300 mm
Weight: 950 kg
1 NEW Drilling and Milling Center Götzinger Power Drill 300
With the Götzinger PowerDrill, depending on type and configuration, you can:
- Drill end faces and longitudinal sides
- Dowel for front doors, setting timbers, transoms
- The drilling patterns are freely programmable
- You can: drill handle positions and corner bearings, with quick-change multi-spindle drilling heads
- You can: mill and drill lock cases, handle and profile cylinders, as well as 3D hinges
- The machine is equipped with both a horizontal and a vertical milling unit
- Simple control system allows you to create, save, and recall drilling and milling programs easily
Base frame built robustly, sheet metal clad
Table support: 1800 x 200 mm
Machining Unit:
X-axis – 500 mm usable travel
Y-axis – 0–120 mm
Z-axis – 0–105 mm (above table)
Horizontal Units:
1 horizontal drilling unit (left dowel drilling unit)
-----
Drill motor: 220 V, 1.1 kW
Collet chuck ER 25
Speed adjustable 4,000 – 11,000 rpm
1 horizontal milling unit for lock case
-----
Milling motor 2.2 kW
Speed adjustable 3,000 – 16,000 rpm
Lsdpfeif Az Uex Acvjhn
Collet ER 25
1 horizontal drilling unit (right dowel drilling unit)
-----
Drill motor 1100 W, continuously variable
4,000 – 11,000 rpm, ER 25 collet
Vertical Units:
1 vertical drilling unit
-----
Drill motor 1100 W, continuously variable
4,000 – 11,000 rpm, ER 25 collet
1 vertical drilling unit with quick-change drilling head system
-----
Drill motor 1.1 kW, 3,000 rpm
Includes:
1 Drilling head BKF 2/3, for corner bearing, quick-changeable
-----
For loose individual component, drill arrangement per customer fittings
1 Drilling head BKF 3, for handle (olive) incl. drill set, quick-changeable
-----
For loose individual component, 1 Kubo drill d=25, 2 x Dübo d=10 included
1 vertical milling unit for lock case
-----
Milling motor 2.2 kW
Speed adjustable 3,000 – 16,000 rpm
Collet ER 25
1 piece length stop right and left, usable length 2.7 m, NC controlled
Control: electro-pneumatic, three-axis NC positioning controller and integrated machine functions
Input via 10” color TFT display
Machine complete, CE compliant, incl. 1 set of drill tools, Dübo each 1 x d = 6, 8, 10, 12 + 2 roughing cutters d = 16, ready to connect
Loading dimensions:
Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg
Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg
-----
Total price for the above configuration, ex works: on request
Plus shipping and setup/instruction
(Technical specifications as per manufacturer, subject to change!)
Annonse
Velen
961 km
Svingbar bøyemaskin
HBM1270 x 2,0
Ring
Tilstand: ny, Plate width: 1270 mm
Sheet thickness: 2.0 mm
Frame width: 1300 mm
Opening width: 48 mm
Max. bending angle: 135°
Lhodpfx Acjupxcgevjn
Total power requirement: Manual operation
Machine weight: approx. 0.4 t
Space requirement: approx. 1.6 x 0.9 x 1.2 m
Segment bending machine
Segment widths:
25, 35, 40, 50, 75, 100, 125, 150, 250 mm.
Annonse
Ahaus
938 km
Platesaks - hydraulisk
EHTECOCUT 10-31
Ring
Tilstand: brukt, Byggeår: 1998, Plate width: 3050 mm
Plate thickness: 10.0 mm
Plate thickness for stainless steel: 6.0 - 8.0 mm
Hold-downs: 13 units
Frame clearance: 3070 mm
Cutting angle: 1.0 - 4.0°
Strokes: ~ 22 strokes/min
Control unit: ELGO P8721
Oil capacity: 240 l
Voltage: 400 V
Total power requirement: 17.0 kW
Weight: 8000 kg
Dimensions (L x W x H): 3550 x 2350 x 1900 mm
Good / well-maintained condition
With special accessories (!!)
Equipment:
- NC electro-hydraulic guillotine shear "GUIDED BY CAM"
- Heavy-duty / robust welded construction (machine frame)
- NC ELGO digital control unit "P8721"
- NC electro-motorised backgauge with ball screw drive
- Electro-hydraulic cutting angle adjustment
* Front analog cutting angle display
- 1x robust side gauge with T-slot and mm scale
Lodpfxsxacixs Acvehn
- 3x sturdy support arms with T-slot and mm scale
- Ball rollers in worktable incl. grip recesses
- Front finger guard – can be folded up at the front
- 1x movable foot switch
- 2x emergency stop buttons at the front
- Operating manual (PDF)
Special accessories included:
- Pneumatic plate support device for thin sheet metal cutting
* Movable – on rollers
- 1x used set of shear blades
Annonse
Aalen
1 302 km
Maskin for boring og innsetting av plugger
GÖTZINGERBLE - Video -
Ring
Tilstand: ny, Bore diameter variable mm
Number of horizontal drilling heads: 1 pc.
Number of vertical drilling heads: 0 pcs.
1 Götzinger Dowel Gluing and Insertion Machine BLE
With the BLE, workpieces are edge-glued and doweled. Optionally, the BLE can be upgraded with a drilling unit, counter-milling unit, and longitudinal stop. A 10" touch panel enables easy operation in manual or online mode.
Base frame: compact design, clad with sheet metal
Table support approx. 800 x 200 mm
Pos. 1
-----
1 glueing station
Full-jet valve
Glue quantity precisely adjustable
Glue gun for counter-hole gluing
Pos. 2
-----
1 stainless steel glue pump, high-pressure pump, and glue hose
Pos. 3
Lodpou Uu Uzofx Acvshn
-----
1 insertion station with dowel singling and pressing cylinder
Pos. 4
-----
1 vibratory feeder for dowels d 8 x 50 mm with feed hose to the insertion unit
Pos. 5
-----
1 processing unit with cross table, linear guide, and 3 NC axis motors
X = 200 mm processing width
Y = 120 mm processing height
Z = 50 mm insertion depth
Pos. 6
-----
1 positioning control
10" colour touch panel
Up to 500 drilling patterns can be created and saved, which can be easily called up when needed. (1 drilling pattern can have up to 16 dowel positions)
Software prepared for ONLINE connection
For online control, the data must be prepared by software for the controller. Our machine can then read and process this data.
-----
Total price in this configuration Pos. 1 to Pos. 6: on request!
Options with surcharges:
-----
Pos. 7
-----
1 horizontal drilling unit, drilling motor 1,000 W
Speed 4,000 - 8,000 rpm, collet chuck
Drilling feed pneumatic
Surcharge: EUR 4,305.00
Further accessories such as larger touch screen, additional dowel station for extra dowel sizes, or scanner for program selection, or also balustrade gluing on request!
Prices net plus statutory VAT, excluding packaging/shipping and commissioning.
(Technical data according to manufacturer – no liability assumed!)
Annonse
Velen
961 km
Plate skjær - mekanisk
OSTASORGM 1050 x 3
Ring
Tilstand: ny, Plate width: 1050 mm
Sheet thickness: 3 mm
Frame clearance: 1100 mm
Lhjdpfx Asfv H Dgscven
Backgauge – adjustable: 600 mm
Connected load: 3 kW
Machine weight approx.: 1.1 t
Dimensions (L x W x H): 1.7 x 2.1 x 1.3 m
The machine operates with low noise and is energy-efficient thanks to its geared motor with braking system.
Our machine is manufactured as a monoblock construction, welded from ST42 quality material.
The blades of the machine are made from 2379 quality material, with the brand name BOHLER.
These high-quality blades ensure precise cutting.
Emergency stop button, foot switch, and finger guard are part of the standard equipment.
(Documentation available only in English)
Tillitsmerke
Autoriserte forhandlere sertifisert av Machineseeker

Annonse
Ahaus
938 km
Svingbar bøyemaskin
HERASML 3020 x 4.0
Ring
Tilstand: brukt, Byggeår: 1997, Plate width: 3020 mm
Sheet thickness: 4.0 mm
Ljdjxacgkopfx Acvehn
Opening width / upper beam: 350 mm
Adjustable bending beam: 100 mm
Adjustable lower beam: 80.0 mm
Max. bending angle: 130°
Working height: 900 mm
Control: SIEMENS OP 7
Operating voltage: 400 V
Total power requirement: 9.5 kW
Weight: 5400 kg
Dimensions (LxWxH): 4300 x 2400 x 1780 mm
Features:
- Robust electrically powered folding machine
- SIEMENS NC - PLC control "OP 7"
* Bending process selectable as fully automatic or semi-automatic operating cycle
* Electronic preselection of bending angle 0-135°
- NC electrically powered, controlled backgauge
* with large rear plate support table
- Robust welded machine frame
- All drives on both sides via worm gears
- Motorized adjustment of the bending beam
- Large adjustment range of the beams
- Electro-hydraulic upper tool clamping
- Tooling / bending tools included
- Original operating manual
* Special accessories included:
- 1x used segmented gooseneck tool set .. H = 195 mm
- 1x used bending rail .. 10.0 mm
- 1x used bending rail .. 20.0 mm
Annonse
Aalen
1 302 km
Kjedelig og dowel sette maskinen
GÖTZINGERPowerDrill m. Duebeleintreiben
Ring
Tilstand: ny, Borediameter variable mm
Number of horizontal drilling heads: 3 pcs.
Number of vertical drilling heads: 4 pcs.
Götzinger Power Drill special edition with dowel gluing and pressing station
With the Götzinger PowerDrill, you can, depending on the type and configuration:
- Drill on the end face and longitudinal sides
- Dowel door leaves, extension rails, mullions
- Free programmable drilling patterns
- Drill for escutcheons and corner bearings with quick-change multi-spindle heads
- Mill and drill lock cases, lever sets, PZ and 3D-hinges
- The machine features both horizontal and vertical milling units
- Easy-to-use control system allows you to create, store, and recall drilling and milling programs
POWER DRILL – Drilling and Milling Machine
Universal drilling machine for drilling for escutcheons, corner bearings, dowel work
End face and longitudinal drilling, milling, lock cases, hinges, etc.
Base frame of heavy-duty construction, sheet metal covered
Support table 1800 x 200 mm
Processing unit:
X-axis – 500 mm usable travel
Y-axis – 100 mm
Z-axis – 105 mm
1 horizontal drilling unit (dowel drilling unit left)
Drill motor 380 V, 1,100 W
Collet chuck d=8/10 mm
4,000 – 11,000 rpm variable
1 vertical drilling unit from above – fixed installation
Drill motor 1.1 kW, 3,000 rpm
Quick-change drilling head system
1 Drilling Head BKF 2/3, quick-change, (corner bearing)
On loose single part, fittings according to customer specification incl. drill bit set
Control: electro-pneumatic with three-axis
NC positioning controller and integrated machine functions
Input via TFT display, 10” color
Machine complete, CE compliant, with 1 set of drill tools
Dowel bits, each 1x d=6, 8, 10, 14 mm + 2 roughing cutters d=16 mm,
1 cutter d=20 mm, ready to connect
1 Drilling Head BKF 3, quick-change for escutcheons incl. drill bit set
Fittings according to customer specification
2 drilling units
1 x horizontal for top drilling (for hinges)
1 x vertical for dowel work, right side
Drill motor 1,100 Watt, steplessly variable
4,000 – 11,000 rpm with collet chuck ER 20
2 milling units for lock case
1 x horizontal for hinges, lock cases
1 x vertical from above for PZ, handle sets, hinges
Milling motor 2.2 kW
Speed adjustable 3,000 – 16,000 rpm
Collet chuck ER 25
1 length stop right and left, usable length 2.8 m, NC controlled
When using the length stop, fixed stops are omitted.
Dimensions:
LxWxH = 2.50 x 1.50 x 2.20 m – weight machine 850 kg PowerDrill
LxWxH = 0.30 x 0.30 x 6.00 m – weight length stop 100 kg
1 dowel gluing and pressing station consisting of:
- Vibratory feeder for dowels with delivery
dowel pressing station
- High-pressure glue pump made of stainless steel with glue tank
- Full jet valve for precise, clean glue application
- Air blow-out nozzle
Surcharge for 1 dowel diameter
Lhsdsd Ih Hyjpfx Acvjn
The base machine is approx. 300 mm longer as a result
(Technical data per manufacturer’s info – without guarantee!)
Annonse
Ahaus
938 km
Platesaks - hydraulisk
HACOHSLX 4006
Ring
Tilstand: brukt, Byggeår: 2009, Plate width 4050 mm
Sheet thickness 6.50 mm
Sheet thickness for stainless steel 4.00 mm
Back gauge - adjustable 1000 mm
Strokes 6 - 11 strokes/min
Working height 880 mm
Control SC 70
Shear angle 0.5 - 3.0 °
Hold-down devices 23 pcs
Motor power 11.0 kW
Machine weight approx. 7500 kg
Dimensions L-W-H 4950 x 1950 x 1720 mm
Machine from a light metal production (aluminium)
Good condition
Incl. special accessories e.g. plate lifting device
- Checked condition - Machine video -
?v=pv7RRijDXJA
Features:
- Electro-hydraulic / guided guillotine shear
- HACO CNC control model SC 70, swiveling, front left
* Pre-selection of back gauge position
* Digital display of actual position
* Electro-hydraulic adjustment of shear angle
* Electro-hydraulic adjustment of blade gap
Ledpfexaccrsx Acvohn
* Programmable back gauge retraction
* Programmable cutting length limitation
* EMERGENCY stop switch
- Electro-hydraulic blade gap adjustment
- Electro-hydraulic shear angle adjustment
- Motorized back gauge with ball screw spindles
- Hydraulic hold-down devices
- Front finger guard
- Ball rollers in the support table
- 1x side gauge with mm scale
- 1x freely movable foot switch
- Rear safety guard
- Original operating manual incl. CE declaration
Special accessories included:
- Pneumatic sheet lifting device for thin sheet cutting
* For sheet thicknesses up to max 4.0 mm
* Optimal positioning of thin sheet metal
Annonse
Ahaus
938 km
Hakkemaskin
INDUMASCH200 H
Ring
Tilstand: brukt, Plate thickness 4.0 mm
Plate thickness for stainless steel 3.0 mm
Blade length 200 mm
Angle adjustable from 30° to 120°
Strokes 60 strokes/min
Oil capacity 60.0 ltr.
Table: 1000 x 800 mm
Total power requirement 2.62 kW
Lhjdpfxsxab N Re Acven
Weight 800 kg
Dimensions L-W-H: 1000 x 1500 x 1440 mm
Equipment:
- Robust hydraulic notching machine with adjustable angle
- Adjustment range 30° – 120°
* Adjustment using two front handwheels
- Hydraulic clamping and locking
- Cutting depth steplessly adjustable with digital display
- 2x precision stops with stop bars
- Scraper for sheet metal cutting
- Collection container for cuttings
- Freely movable foot pedal for stroke activation
Vi gjør det enklere for deg å søke: "pizzadeig sheeter"
Du får nye tilbud på e-post umiddelbart og gratis.
Du kan når som helst enkelt avslutte søkeoppdraget.
Brukt Pizzadeig Sheeter (333)
Søk nå gjennom hele Machineseeker med mer enn 200 000 brukte maskiner.Bla gjennom de mest populære maskinbetegnelsene:

Få informasjon nå
+44 20 806 810 84
+44 20 806 810 84
Legg inn annonse nå
*per annonse/måned
































































































































































































