Kjøp brukt Herkules (5)

Tilstand: brukt, Rullesett for profilbendemaskin, 3-ruller ringbendemaskin HERKULES WETZLAR. Rullene passer til en profilbendemaskin HERKULES WETZLAR type BO 238 N. Akseldiameter: 60 mm med 18 mm kilenot. 2 stk. ruller sett nr.1, rullediameter 110 mm, rullebredde = 180 mm. 2 stk. ruller sett nr.2, rullediameter 160 mm, rullebredde = 40 mm. 3 stk. ruller sett nr.3, rullediameter 150 mm, for rørdiameter Ø 33 mm, rullebredde 87 / 115 mm. - Rullesett nr. 3 med adapterring fra Ø 93 til Ø 60 mm uten kilenot. Lhodpfsglaq Iex Ap Djh Maskinen hadde 2 drevne ruller. Total vekt på alle rullene: 57 kg. God stand.

Tilstand: brukt, Herkules Siegen LAB250H rulle-sliper Modell: LAB250H Kapasitet: 20 tonn Enkelt slipeskive Svingdiameter: 1000 mm Avstand mellom sentre: 6500 mm Chuck: 900 mm Lodpsy U Hdfsfx Ap Dohh Motordrevet bakdokke Avfallsbånd

Tilstand: brukt, Byggeår: 2017, maskin-/kjøretøynummer: 117119, Lg.Nr. 25158 Tekniske data: Lhjdpfx Ajxay D Hop Djh - Luftmengde ca. 220 m³/t - Støvklasse M - Tilkoblingsstuss: 50 mm - Skuff - Pneumatisk tilkobling - Driftseffekt: 400 V / 1,3 kW - Plassbehov: B 1000 x H 1350 x D 500 mm - Vekt ca. 120 kg

Tilstand: brukt, Drei diameter over bed: 2400 mm Drei diameter over saddle: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Max. turning diameter over saddle: 2200 mm Max. swing diameter over bed: 2400 mm Max. turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm (up to 2050 mm with special jaws) Clamping diameter in tailstock face plate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive / Face Plate Face plate diameter: 2000 mm Ledpfjxddvnex Ap Dohh Infinitely variable face plate speeds, 4 ranges: 1.5 - 150 rpm Max. torque at nominal speed: 220,000 Nm Main motor power: 185 kW Flange centre point angle: 70° Saddles Travel of infeed slide: 500 mm Travel of planing slide: 1,400 mm Rapid traverse longitudinal: 2,000 mm/min Rapid traverse crosswise: 800 mm/min Stepless feed rates, longitudinal: 0.6 - 300 mm/min Stepless feed rates, cross: 0.3 - 120 mm/min Max. cutting force at saddle: 20,000 kg Tailstock Removable face plate diameter: 1650 mm Face plate clamping diameter: 1400 mm Flange centre point angle: 70° Rapid traverse: 1,250 mm/min Special Equipment Copying device for first saddle: - Copying length: 8,500 mm - Max. copying depth in one pass: 500 mm Boring device: - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1,000 mm - Max. boring depth in one pass: 2,700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev Max. chip cross-section: 30 mm² at an extension of 1,000 mm; with increasing boring depth the chip cross-section decreases accordingly Taper turning attachment: - Setting angle up to 8° and max. taper length (in one pass) of 2,000 mm, setting accuracy ± 5 minutes - Setting angle up to 15° and max. taper length (in one pass) of 1,000 mm, setting accuracy ± 5 minutes 125 kg auxiliary crane on headstock.

Tilstand: klar til bruk (brukt), Byggeår: 1976, Funksjonalitet: fullt funksjonell, svingelengde: 5 000 mm, svingediameter: 1 550 mm, Dreiemaks diameter: 1.550 mm Spissavstand: 7.000 mm Lhodpfx Apsx Sdqqs Doh Planskje: 0,63 til 63 o/min Maks. arbeidsstykkevekt: 50 tonn Maskinvekt: ca. 80 tonn