Kjøp brukt Gannomat Protec (55)

Tilstand: klar til bruk (brukt), Byggeår: 1996, Funksjonalitet: fullt funksjonell, Gannomat Mod. 260 Korpuspresse Innspenningsstørrelse 2500 x 1250 x 650 mm Arbeidstrykk 0–10 bar Sylinderslag 110 mm Plassbehov 3240 x 2120 x 770 mm Vekt 900 kg Årsmodell 2010 CE-godkjent Maskinen er under klargjøring, og flere bilder vil bli tilgjengelige snart. Ksdjrfbnbepfx Aa Nedi

Tilstand: ny, Byggeår: 2025, Funksjonalitet: fullt funksjonell, Gannomat Selekta dybelinnsettingsmaskin Årsmodell 2025 Dybelinnsettingsmaskin med pistol for samtidig liming og innsetting av dybler. For profesjonell og effektiv bearbeiding av dybler innen møbel- og rammekonstruksjon. • Konstant dybel-fremspring etter innsetting • Alltid konstant og korrekt limmengde Kedjvxgm Nepfx Aa Nodi • Takket være korrekt limmengde er etterfølgende rengjøring av emnene unødvendig • Enkel rengjøring av limsystemet via EasyClean, det automatiske rengjøringsprogrammet • Automatisk utkast av dybler med feil diameter og lengde med Auto-DL-Selekt • Dybler settes ikke til bunnen; dybel-fremspringet kan stilles uavhengig av boredybden • Rekylfri, ekstra lett og komfortabel lim- og dybelinnsettingspistol • Betydelig tidsbesparelse sammenlignet med bruk av limflaske og hammer

Tilstand: verkstedoverhalt (brukt), Byggeår: 2007, Tilkobling 220V, trykklufttilkobling 6 bar, vekt ca. 110 kg, mobil, dybelmating via vibrasjonsmater, automatisk kontroll av dybellengde og diameter, helautomatisk elektronikkstyring, skylling-liming-liming+innslag, velgerbryter for lim/vann til skylling, indikator for limrestmengde, rustfri beholder for lim, rustfri beholder for vann, 1x pistol for dybeldiameter 8 mm lengde 20-50 mm, bruksanvisning. Kdodpewrruqefx Aa Nei

Tilstand: brukt, Byggeår: 2018, 1 piece CNC-CONTROLLED BORING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel inserting station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traverse speed 78 m/min - Z-axis, position programmable over supporting table 5-40 mm with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option for NC-controlled Y-axis - Drilling depth 0-35 mm (with drill length TL 70 mm) is automatically set with the insertion projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity from 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each 1 stainless steel container for 5 kg glue and 5 l water - Control lamp for glue residue level indication in glue container - 1 pc. left side stop, 1 pc. right side stop and 1 pc. middle stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapter, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, drill spacings freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and workflow optimization, 4 work fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, error diagnostics in clear text OPTIONS: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 4 vertical inclined clamping cylinders 10° with holders, additional (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal boring unit, motor 1.5 kW, with multi-spindle boring head with 3 individually selectable drill spindles, 32 mm pitch in X-axis, tool speed 3000 rpm (standard working length not reduced) 1 Y-axis NC-controlled, with ball screw spindle and dynamic traverse speed of 300 mm/sec. Programmable via software: dowel insertion projection 7-30 mm and bore depth 0-42 mm (with drill length TL 77 mm) for vertical drilling unit drilling from ABOVE, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from ABOVE, motor 1.5 kW, with multi-spindle drilling head with 3 individually selectable drill spindles, 32 mm pitch in X-axis, tool speed 3000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) 1 NC-controlled Z-axis with ba... Kdjdpfx Aoxwaz Hea Nji

Tilstand: brukt, Byggeår: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal: clamping-drilling-unclamping, with electric skip cycle. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic borehole depth extension for end-face drilling. This eliminates the need to reset the drilling depth when switching from face to end drilling (+10 mm, e.g., for dowel length 35 mm, drilling depth face side 14 mm, and end drilling depth 24 mm). - 1 boring beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas springs. - 1 clamping carrier movable along the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. Kdedpfxsxnlfle Aa Nsi - Ideal stop system consisting of: - 1 stop rail (fence) 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, - with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for line boring in the 32 mm system. - Side stops and position settings, as well as drilling height positioning via mechanical digital counters on the support table. - Side stops can be easily swung away for shortest retooling times between case, frame, and line boring operations. - Clamping arms for clamping carrier for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drills comprising: - 5 carbide dowel drills, Ø 8x77 mm, right-hand - 4 carbide dowel drills, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal: clamping-drilling-unclamping, with electric skip cycle. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic borehole depth extension for end-face drilling. This eliminates the need to reset the drilling depth when switching from face to end drilling (+10 mm, e.g., for dowel length 35 mm, drilling depth face side 14 mm, and end drilling depth 24 mm). - 1 boring beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas springs. - 1 clamping carrier movable along the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for line boring in the 32 mm system. - Side stops and position settings, as well as drilling height positioning via mechanical digital counters on the support table. - Side stops can be easily swung away for shortest retooling times between case, frame, and line boring operations. - Clamping arms for clamping carrier for line boring positions up to max. 300 mm. - Ideal three-stage tool system. Extraction funnel, dust-tested, Ø 120 mm 1 pc set for line boring in the System