Kjøp brukt Dyp Tegning (1 352)

Tilstand: ny, Byggeår: 2025, pressekraft: 300 t, slagslengde: 800 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 100 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Metal Spinning) Press – 8-Guided Slides Pjdpfxex N Uhbs Aqtsgn General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, with a 300-ton main ram and a 100-ton cushion (pot) capacity, is designed for deep drawing and metal spinning applications requiring high tonnage. The machine body is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame type press with 8 guided slides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welds accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 Type: Steel construction, H-frame press with 8 guided slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Ton Capacity (Cushion): 100 Ton Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Cushion Table Advance Speed: 30 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Cushion Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Fast Advance Cylinders: 2 units Approximate Height of Press: 4400 mm Approximate Width of Press: 3250 mm Approximate Depth of Press: 2200 mm Height of Lower Table from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 800 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 000 mm, tilbaketrekkskraft: 270 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + cushion) operating principle for high-tonnage sheet metal forming, deep drawing, and stamping applications. The 8-gibbed H-frame construction ensures high rigidity, stable parallelism, and long die life even with large bolster dimensions during the entire pressing process. The CHSP 800/270 model, with 800 ton main ram and 270 ton cushion pressing capacity, is specifically developed for processes requiring controlled material flow, particularly in the automotive, white goods, defense industries, and heavy sheet metal forming applications. The vibration stress-relieved steel construction frame provides long-term, reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gibbed H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 gib liner bearings • WPQR and WPS approved welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Monitor oil temperature and system status of hydraulic unit via display • Offline filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-gibbed H-frame press body Frame Material: St52 – ERDEMİR Gib Liner: Bronze Zr14 Capacity (Ram): 800 Ton Capacity (Cushion): 270 Ton Moving Bolster Size: 1500 × 2000 mm Fixed Bolster Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 pcs) Cushion Cylinder: Ø370 mm – Ck45 Pgsdsx N Uh Uspfx Aqten Pre-fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 2 500 t, slagslengde: 1 000 mm, bordbredde: 1 800 mm, bordlengde: 2 600 mm, tilbaketrekkskraft: 800 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description Pgodpfx Ajx N Uk Aoqten The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications requiring extremely high tonnage, large bed dimensions, and precise blank holder force. The 8-guided H-frame press body ensures high rigidity during the pressing cycle, maintaining parallelism and perpendicularity tolerances over the entire stroke. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance with 2500 tons of main ram and 800 tons of blank holder capacity, making it ideal for large and deep draw dies. Its stress-relieved, welded steel construction is designed for long-lasting and reliable operation in heavy industrial environments. ⚙️ Standard Equipment • 8-guided H-frame welded steel body • Stress-relieved frame by vibration • Bronze Zr14 slide bearings • Welding applications approved by WPQR and WPS with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen control panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Display of hydraulic unit oil temperature and system diagnostics on screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Welded steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR grade steel Slide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 100 t, slagslengde: 600 mm, bordbredde: 800 mm, bordlengde: 800 mm, klaring mellom søylene: 800 mm, tilbaketrekkskraft: 40 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 100/40 Ton Column-Type Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton column-type hydraulic deep drawing press is an industrial press solution designed for metal forming, deep drawing, and precision pressing applications, featuring a four-column rigid frame. The St52 grade steel frame is subjected to stress relief via vibration methods. This structure ensures long-term retention of high parallelism and squareness tolerances. The ram and blank holder systems operate independently; stroke and pressure are precisely controlled via a touchscreen panel. Utilizing REXROTH or PARKER hydraulic components, energy-efficient IE3 motors, and a PLC-controlled system, the press offers superior efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. This model provides an ideal solution for medium-scale serial production, die trials, and precision forming applications. Key Advantages - Rigid 4-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High accuracy and repeatability - Low maintenance costs, long service life Fields of Application Pgodpfx Aqex N Ulyetsn - Metal forming operations - Deep drawing applications - Die trials and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m SQUARENESS TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BLANK HOLDER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO BOTTOM TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION MODE: Automatic (adjustable via panel) RAM / BLANK HOLDER STROKE AND TONNAGE ADJUSTMENT: Adjustable from panel SYSTEM & PRESS STATUS INFORMATION: Viewable from panel DIE MEMORY: Adjustable from panel LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 250 t, slagslengde: 800 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 80 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its 8-guided H-frame structure, the press ensures maximum rigidity during operation; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton bottom cushion (pot), is designed for medium to high tonnage deep drawing and forming operations. The frame construction is stress-relieved via vibration methods, aiming for long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 slideways - Vibration stress-relieved frame structure - Zr14 Bronze slideway bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 250/80 - Type: Steel construction, H-frame body with 8 slideways - Frame Material: St52 – ERDEMİR - Slideway Bushings: Zr14 Bronze - Capacity (Ram): 250 Tons - Capacity (Cushion/Pot): 80 Tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion/Pot): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relieving: Vibration stress relief - Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max Working Pressure: 250 Bar - Total Installed Motor Power: 37 kW – IE3 Pgodpsx N Uaqofx Aqten - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 4200 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 150 t, slagslengde: 600 mm, bordbredde: 800 mm, bordlengde: 800 mm, klaring mellom søylene: 800 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 150/50-ton four-column hydraulic drawing press is an industrial press solution developed for metal drawing, deep drawing, and precision pressing applications, featuring a rigid four-column frame design. The ST52-grade steel construction body undergoes stress relief via vibration method, ensuring the preservation of high parallelism and perpendicularity tolerances during extended operation. Ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely set via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC control, the press delivers high efficiency, reliability, and extended service life. The automatic lubrication system and electronic filter contamination alerts reduce maintenance requirements to a minimum. With its 150/50-ton capacity, this model is the ideal solution for mass production, die trials, and medium to high tonnage deep drawing applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Application Areas - Metal drawing operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 tons CAPACITY (CUSHION): 50 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 microns/meter PERPENDICULARITY TOLERANCE: 60 microns/meter STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm Pgedpfxex N Ul To Aqton MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELD STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3800 mm APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (adjustable from the screen) RAM / CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via the screen SYSTEM & PRESS STATUS INFO: Displayed on the screen DIE MEMORY: Adjustable via the screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 200 t, slagslengde: 800 mm, bordbredde: 1 000 mm, bordlengde: 1 000 mm, klaring mellom søylene: 1 000 mm, tilbaketrekkskraft: 70 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 200 / 70 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton column-type hydraulic deep drawing press is a high-rigidity four-column hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The steel frame, made from St52 grade material, undergoes stress-relief via vibration treatment, ensuring high parallelism and verticality tolerances are maintained during continuous operation. The ram and blank holder systems operate independently, with stroke and pressure settings finely adjustable via the touch panel. With REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled design, the press provides high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination warnings minimize maintenance needs. With its 200 / 70 ton capacity, this model is an ideal industrial press solution for medium and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Rigid 4-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Long service life and low maintenance costs Applications - Metal forming operations - Deep drawing applications - Die testing and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Ton CAPACITY (BLANK HOLDER): 70 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m. VERTICALITY TOLERANCE: 60 micron/m. STROKE (RAM): 800 mm STROKE (BLANK HOLDER): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm WELDING STRESS RELIEF: By vibration WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/s FORMING SPEED: 12 mm/s RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER INNER DIAMETER: Ø 320 mm – Ck45 Pgsdpfx Aqsx N Umqjtjn BLANK HOLDER CYLINDER INNER DIAMETER: Ø 190 mm – Ck45 AUXILIARY SPEED-UP CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 1 000 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 000 mm, tilbaketrekkskraft: 350 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and flow forming applications. The 8-guide H-frame construction provides high rigidity during pressing and ensures stable maintenance of parallelism and perpendicularity tolerances even with large bolster dimensions. The CHSP 1000/350 model, with a main ram capacity of 1000 tons and a blank holder capacity of 350 tons, is specifically designed for deep drawing processes requiring controlled material flow, particularly in the automotive, white goods, defense, and heavy industry sectors. The vibratory stress-relieved steel construction frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, H-frame body with 8 guides • Stress-relieved frame via vibration • Bronze Zr14 guide bushings • Welds applied in accordance with WPQR and WPS procedures approved by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen control panel (DELTA 7”) • Adjustable stroke control (ram and blank holder) • Adjustable tonnage (pressure) control (ram and blank holder) • Automatic lubrication system • Electronic contamination warning for filters • On-screen monitoring of hydraulic unit oil temperature and system status • Offline filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Pedpfx Aox N Uiloqtjgn Type: Steel construction, H-frame body with 8 guides Frame Material: St52 – ERDEMIR Guide Bearings: Bronze Zr14 Capacity (Ram): 1000 tons Capacity (Blank Holder): 350 tons Moving / Fixed Table Size: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 pcs) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: ny, Byggeår: 2025, pressekraft: 200 t, slagslengde: 800 mm, bordbredde: 1 000 mm, bordlengde: 1 200 mm, tilbaketrekkskraft: 70 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Metal Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP Series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal forming (spinning) applications. The 8-slide H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 200/70 model, with its 200-ton main ram and 70-ton cushion (pot) capacity, is designed for deep drawing and metal forming operations requiring medium-high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame type press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable stroke control for ram and cushion - Adjustable tonnage (pressure) control for ram and cushion - Automatic lubrication system - Electronically monitored filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Offline filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Pgodex N T U Tjpfx Aqten Capacity (Ram): 200 Ton Capacity (Cushion/Pot): 70 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relieving: Vibration method Welding Application: WPQR and WPS approved by TÜRK-AK EN ISO 15614-1/2017 (Welding applications inspected by certified “welding coordination engineers” in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø320 mm – Ck45 Cushion Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 3800 mm Approx. Width: 2950 mm Approx. Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Offline Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 500 t, slagslengde: 1 000 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, tilbaketrekkskraft: 175 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed based on a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming operations. The 8-slide H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 500/175 model, with a 500-ton main ram and 175-ton cushion (blankholder) capacity, is designed to provide full control over the die and workpiece for high-tonnage deep drawing and forming applications. The frame construction is stress-relieved by vibration methods to ensure long-lasting and reliable operation. Pjdpfex N Uhusx Aqtjgn ⚙️ Standard Equipment Steel construction, 8-slide H-frame press body type Vibration stress-relieved frame structure Bronze Zr14 slide bearings WPQR and WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) accredited by TÜRK-AK Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch screen panel (DELTA 7”) Adjustable ram and cushion stroke control Adjustable ram and cushion tonnage (pressure) control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Safety systems for operator protection SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearing: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/mt. Perpendicularity Tolerance: 60 micron/mt. Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø500 mm – Ck45 Cushion Cylinder Bore: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5800 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: ny, Byggeår: 2025, pressekraft: 1 200 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 000 mm, tilbaketrekkskraft: 400 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Hydroforming) Press – 8-Gib General Description Pedpfex N Uirsx Aqtegn The CRONOSSTECH CHSP series H-type hydraulic forming and deep drawing presses are engineered to provide maximum rigidity, precision, and process control in sheet metal forming applications that require high tonnage. The 8-gib H-frame body structure ensures stable maintenance of parallelism and perpendicularity tolerances even at large table sizes. The CHSP 1200/400 model, with a 1200-ton main ram and 400-ton cushion capacity, is designed for heavy industrial applications such as deep drawing, hydroforming, and processes requiring controlled material flow. The steel construction frame, stress-relieved by vibration, ensures long service life and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slideway bearings • WPQR and WPS approved welded assemblies by TÜRK-AK accredited certification (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Hydraulic unit oil temperature and system status monitoring on display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switching components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Cushion): 400 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Clearance (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Cushion Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 2 000 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 500 mm, tilbaketrekkskraft: 600 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and controlled blank holder pressure. With its 8-guided slide H-frame body structure, both ram and table movements are executed with high rigidity throughout the pressing operation; parallelism and perpendicularity tolerances are consistently maintained over the full stroke length. The CHSP 2000/600 model, featuring a 2000-ton main ram and 600-ton blank holder capacity, provides high control and repeatability for large-scale dies, deep drawing, and forming operations. The vibration stress-relieved steel welded frame ensures a long service life and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction H-frame with 8 guiding slides • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • Welding applications approved by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen operation panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Display of hydraulic unit oil temperature and system status on the screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, 8-guided slide H-frame press Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram / Blank Holder): 2000 / 600 Tons Moving / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Psdpjx N Ukvsfx Aqtegn Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 units) Blank Holder Cylinder: Ø390 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 300 t, slagslengde: 800 mm, bordbredde: 1 000 mm, bordlengde: 1 000 mm, klaring mellom søylene: 1 000 mm, tilbaketrekkskraft: 100 t, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH 300 / 100 TON COLUMN-TYPE HYDRAULIC DEEP DRAW PRESS General Description The CRONOSSTECH 300 / 100 ton column-type hydraulic deep draw press is a highly rigid four-column hydraulic press solution developed for metal spinning, deep drawing, and precision pressing applications. The St52 grade steel welded frame undergoes a stress-relief process through vibration. This ensures parallelism and perpendicularity tolerances remain stable over the entire stroke length during pressing operations. The ram and cushion systems operate independently; stroke and tonnage adjustments can be precisely controlled via the touch panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled architecture, the system provides high efficiency and reliable operation. An automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. With its 300 / 100-ton capacity, this model is the ideal industrial press solution for medium and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - 4-column, high-rigidity press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Durable design with low maintenance costs Fields of Application - Metal spinning applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Ton CAPACITY (CUSHION): 100 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 900 mm WELD STRESS RELIEVING: Vibration stress relief WELD PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER Psdpsx N Unzofx Aqtsgn MOVABLE TABLE RAPID DOWN SPEED: 150 mm/s DEEP DRAW SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 390 mm – Ck45 CUSHION CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm MAIN CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: brukt, 420 x 4 mm BKM ENKELGRAVS HØY-KARBON STÅL SLITTELINJE Produsent: BKM (Tyskland) Linjeretning: Høyre til venstre Linjens hastighetsområde: 0 - 200 m/min (656 fot/min) – trinnløst justerbart Båndbreddeområde: 15 - 420 mm (0,595 - 16,5") Materialtykkelse: 0,3 - 4 mm (0,01181 - 0,15748") Materialspesifikasjoner: Kaldvalset stål Strekkfasthet: >750 N/mm² Komplett linje med følgende komponenter: Innmatingsgrop med coilbil, type Entry Pit Maks coilvekt: 6 tonn Spoleavvikler med dor 40KW DC-drift Coil innvendig diameter: 500 mm (20") Coil utvendig diameter: 1950 mm (77") Maks coilvekt: 6 tonn Hydraulisk ekspansjon Hydraulisk klemarm Avtrekksbord (Peeler Table), NY 2024 (MGK-Maschinenbau, Tyskland) Inngående filtbrems, hydraulisk Inngående dobbelsidige kantstyringer, manuelt justerbare Slitthode 58KW DC-drift Hydraulisk åpne-/lukkesystem Høydejustering via elektrisk spindeldrift Shaft utvendig diameter: 100 mm (3,937") Verktøydiameter-område: 262,00 mm - 223,00 mm (10,315" - 8,778") Skrapruller ved utgang fra slitthode Skrapoppruller 1 sett avgradingsvalser - drevet / ikke-drevet Grop etter avgradingsvalser – 3 m dyp Pedpfxezad Tys Aqtegn Strekkbord med innmatingsrullebord, drevet avledningsrull, pneumatisk filtbrems og hydraulisk platesaks for kantklipp Oppruller 75KW DC-drift Maks coilvekt: 5,5 tonn 400 + 500 mm dor (15,748" – 19,685") Maks coil utvendig diameter: 1550 mm (61,023") Overarmsseparator Full hydraulisk trommel Avskyverplate Utmatings-coilbil, 2-armet dreieskivetype Maks coilvekt: 5,5 tonn Maskinen er installert og under strøm! Leveres komplett med hydraulikk, elektrisk utrustning, styring, tegninger og verktøy.

Tilstand: svært god (brukt), Byggeår: 2015, maskin-/kjøretøynummer: 03814V2200, Funksjonalitet: fullt funksjonell, driftstimer: 2 416 h, inngangsspenning: 380 V, type innstrømsstrøm: trefaset, vandring X-akse: 2 200 mm, vandring Y-aksen: 1 200 mm, bevegelsesavstand Z-akse: 280 mm, antall plasser i verktøymagasinet: 1, total høyde: 2 400 mm, total lengde: 3 000 mm, total bredde: 1 200 mm, totalvekt: 1 100 kg, bordlengde: 2 200 mm, bordbredde: 280 mm, kjølevæsketilførsel: 3 stang, matelengde X-akse: 2 200 mm, matinglengde Y-akse: 1 200 mm, matelengde Z-akse: 280 mm, mating X-akse: 7 m/min, matingshastighet Y-akse: 7 m/min, mating Z-akse: 6 m/min, spindelmotoreffekt: 4 500 W, antall spindler: 1, hurtigmating Z-akse: 6 m/min, hurtigmating X-akse: 7 m/min, hurtig tverrslag Y-akse: 7 m/min, rotasjonshastighet (maks.): 18 000 o/min, omdreiningstall (min.): 1 000 o/min, spindelhastighet (maks.): 18 000 o/min, spindelhastighet (min.): 1 000 o/min, bordhøyde: 1 200 mm, Utstyr: rotasjonshastighet trinnløst variabel, NUMERISK STYRT PANTOGRAF MED VERTIKALPLAN MODELL "VERTICAL 2200 OPEN" MED 3 INTERPOLERTE AKSER FOR BEARBEIDING AV MARMOR OG GRANITT grunnleggende oppsett: - arbeidsområde: x-akse = 2200 mm, y-akse = 1200 mm, z-akse = 300 mm; Pjdjygxc Aepfx Aqtogn - arbeidsflate L. 2500 x H. 1250 mm; - kraftig sveiset og maskinert stålkonstruksjon, lakkert; - Sideåpninger med løkker, både til venstre og høyre, for bearbeiding av overdimensjonerte blokker med støtteruller; - platestøtte og kapsling i rustfritt stål; - ekstra dyp arbeidsbenk laget av ekstrudert aluminiumprofil; - platelås med 2 stk. mekaniske tvinger; - trefase elektrospindel 5 1/2 hk med gass-tilkobling, perforert aksel og roterende kobling for vannkjøling av verktøy, både internt og eksternt, og frekvensomformer for opptil 18 000 o/min; - åpningsbar beskyttelse i polykarbonat for elektrospindel, med sikkerhetsbryter; - aksebevegelse via føringer og resirkulerende kulevogner; - beskyttelsestelt mot støv for total beskyttelse av alle bevegelige deler; - verktøyskjølesystem med sentralisert avløp, inkludert pumpe, sedimenteringstanker og låseelektroventil; - elektronisk panel med konsoll som inkluderer numerisk styring, pc og skjerm. Windows-basert programvare inkludert. ARTCAM INSIGNA: - utførelse av forhøyede og inngravert skrift ved bruk av alle "True Type"-fonter; - CAD for boring, kapping, gravering, fresing og intarsia; - import av de vanligste filtypene som dxf og dwg for å lage skrifter, tegninger og stempler, relieffer og inngravert logoer, dusjkar, vasker, buer og portaler; - automatisk boring for innfelling av bronsebokstaver; - enkelt- og flerskulpturarbeid i høy- og lavrelieff; - automatisk avstenging; 3D PLAN LASER kopisystem for import av produserte produkter og tredimensjonale figurer (høy- og lavrelieff) med grensesnitt og programvare for tilpasning til ønskede dimensjoner. Dersom du trenger ytterligere informasjon om maskinen, vennligst gi beskjed.

Tilstand: god (brukt), Løftemast, truckmast, gaffeltruckmast, løfteramme, bakløfter, friløftsmast - Produsent: Toyota, truckmast, friløftsmast fra frontgaffeltruck type E15Z-02 Pjdpfx Aqjzg T Ekjtogn - Løftekapasitet: 1500 kg - Løftehøyde: mm - Opptak/mål: se bilder / teknisk tegning - Transportmål: 2480/1040/H330 mm - Vekt: 504 kg

Tilstand: god (brukt), Løftemast, gaffeltruckmast, løfterigg, bakmontert truck, triplexmast Pedpfx Aqjzg Tu Ejtogn - Produsent: Still, triplexmast fra motvektstruck - Løftekapasitet: 1600 kg - Feste/dimensjoner: se bilder / teknisk tegning - Mål: 1940/1050/H350 mm - Vekt: 573 kg

Tilstand: god (brukt), Løftemast, truckmast, gaffeltruckmast, løfteramme, bakgafler, friløftsmast -Produsent: Toyota, truckmast, friløftsmast fra motvektstruck -Løftekapasitet: 2500 kg -Løftehøyde: 3300 mm -Opptak/mål: se bilder / teknisk tegning -Transportmål: 2070/1160/H590 mm -Vekt: 666 kg Pgjdpfjzg Turjx Aqten

Tilstand: god (brukt), Tekniske data for palle-reol: Reolsystem: Dexion Type: P 90 Tekniske data for oppstilling: Antall reolrader: 01 stk. Lengde per reolrad: ca. 37 170 mm Antall seksjoner per reolrad: 12 stk. á 3 000 mm Antall nivåer inkl. gulvnivå: 02 stk. Tekniske data for volum: Palleplasser per seksjon: 09 stk. Palleplasser per reolrad: 108 stk. Totalt antall palleplasser: 108 stk. Basert på følgende: Lastbærer: Europall EN 13698-1 Mål: 1 200 x 800 x 150 mm Totalhøyde inkl. pall: n/a Vekt per pall (maks.): 600 kg Leveringsomfang: 13x reolstendere, brukt Materialfarge: sendzimir-forsinket Type: M Profilmål: 90 x 70 x 1,80 mm Inkl. tverr- og diagonalstag, fotplater Stenderne er pre-montert (boltet fagverkskonstruksjon) 2 000 mm høy 1 100 mm dyp 48x pallereolbjelker, brukt Materialfarge: oransje I-profil: 120 x 50 mm Bjelketype: SLI 120 |14 S 350 Oppheng: 5 HK Lysåpning: 3 000 mm Maks. belastning per bjelkepar 1 800 kg, ved jevnt fordelt last. 96x sikringssplint, brukt Materialfarge: sendzimir-forsinket For sikring av langsgående bærere mot utilsiktet løfting 52x bolteanker, nye Produsent: Hilti Typebetegnelse: HST2 M12x105/10 Materiale: Karbonstål, forsinket Godkjent for: sprekt betong 26x utjevningsplate, brukt Utførelse: komplett forsinket For nivellering av reolstendere til bruk på ujevnt underlag 01x belastningsskilt med angivelse av seksjons- og faglast, produsent og ordrenummer Mål: 420 x 297 x 3 mm Dine kontaktpersoner hos oss: Pgedszgvxgjpfx Aqtjn Herr: Andre Evering Herr: Mario Klöver Herr: Falk Deutsch Generell informasjon om artikkelen: Denne artikkelen tilbys kun for henting. Ønskes transport eller forsendelse utover dette, tilkommer ekstra kostnader som kan forespørres hos oss avhengig av leveringssted og omfang.

Tilstand: god (brukt), Tekniske data for pallereolsystemet: Reolsystem: Dexion Type: P 90 Tekniske data for oppstillingen: Antall reolrekker: 01 stk. Lengde pr. reolrekke: ca. 15.540 mm Antall seksjoner pr. reolrekke: 05 stk. á 3.000 mm Antall nivåer inkl. gulvnivå: 02 stk. Tekniske data om volum: Pallplasser pr. seksjon: 09 stk. Pallplasser pr. reolrekke: 45 stk. Totalt antall pallplasser: 45 stk. Basert på: Lastehjelpemiddel: Europall EN 13698-1 Mål: 1.200 x 800 x 150 mm Totalhøyde inkl. pall: ikke definert Vekt pr. pall (maks.): 600 kg Leveringsomfang: 06x pallereolstendere, brukt Materialfarge: sendzimirforsinket Type: M Profilmål: 90 x 70 x 1,80 mm Inkl. tverr- og diagonalstag, fotplater Stenderne er prefabrikkerte (skrudd fagverk) 2.000 mm høye 1.100 mm dype 20x pallereolbjelker, brukt Materialfarge: sendzimirforsinket I-profil: 120 x 50 mm Bjelketype: SLI 120 |14 S 350 Krok: 5 HK Lysåpning: 3.000 mm Maks. belastning pr. bjelkepar: 1.800 kg, ved jevnt fordelt last. 40x sikringssplint, brukt Materialfarge: sendzimirforsinket For sikring av langbjelkene mot utilsiktet løfting 24x bolteanker, nye Produsent: Hilti Typebetegnelse: HST2 M12x105/10 Utførelse: karbonstål, galvanisert Pjdpszgt Ncjfx Aqtogn Godkjent for: oppsprukket betong 12x utjevningsplate, brukt Utførelse: helforsinket For nivellering av reolstendere som er plassert på ujevnt underlag 01x belastningsskilt med opplysninger om seksjons- og hyllebelastning, produsent og ordrenummer Mål: 420 x 297 x 3 mm Kontaktpersoner hos oss: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Generell informasjon om varen: Denne varen selges kun for henting. Eventuell ønsket transport eller forsendelse av denne varen vil påløpe ekstra kostnader, som kan innhentes hos oss avhengig av leveringssted og leveringsomfang.

Tilstand: god (brukt), Tekniske data for pallereol: Reolsystem: Dexion Type: P 90 Tekniske data for oppsett: Antall reolrader: 01 stk. Lengde per reolrad: ca. 15.540 mm Antall fag per reolrad: 05 stk. á 3.000 mm Antall nivåer inkl. bunnen: 02 stk. Tekniske data for volum: Palleplasser per fag: 09 stk. Palleplasser per reolrad: 45 stk. Totalt antall palleplasser: 45 stk. Basert på: Lastehjelpemiddel: Europall EN 13698-1 Mål: 1.200 x 800 x 150 mm Totalhøyde inkl. pall: n.a. Maks. vekt per pall: 600 kg Leveringsomfang: 06x pallereolstendere, brukt Materialfarge: sendzimirforsinket Type: M Profilmål: 90 x 70 x 1,80 mm Inkl. tverr- og diagonalstag, fotplater Stenderne er formontert (skrudd fagverk) 2.000 mm høy 1.100 mm dyp 20x pallereolbjelker, brukt Materialfarge: oransje I-profil: 120 x 50 mm Bjelketype: SLI 120 |14 S 350 Endeplate: 5 HK Fri bredde: 3.000 mm Maks. belastning pr. bjelkepar: 1.800 kg ved jevnt fordelt last. 40x sikringssplinter, brukt Pgsdpfxszgrwxj Aqten Materialfarge: sendzimirforsinket For sikring av langsgående bjelker mot utilsiktet løft 24x betonganker, nytt Produsent: Hilti Typebetegnelse: HST2 M12x105/10 Utførelse: Karbonstål, forsinket Godkjent for: sprukket betong 12x utjevningsplater, brukt Utførelse: komplett forsinket For nivellering av reolstendere som plasseres på ujevnt underlag 01x belastningsskilt med informasjon om felt- og seksjonslast, produsent og kommisjonsnummer Mål: 420 x 297 x 3 mm Dine kontaktpersoner hos oss: Herr Andre Evering Herr Mario Klöver Herr Falk Deutsch Generell informasjon om artikkelen: Denne artikkelen tilbys kun for avhenting. Ønskes ytterligere transport eller forsendelse av denne artikkelen, påløper ekstra kostnader som avklares separat og kan forespørres fra oss, avhengig av leveringssted og -omfang.

Tilstand: god (brukt), Rissprisme, kontrollprisme, prisme, vinkelprisme, oppspenningsvinkel, oppspenningsprisme, oppspenningskubus, prismeblokk Pjdpfx Aezfy Rkoqtsgn -Rissprisme: Prismeblokk for risseplate, oppspenningsplate, retteseng ... 7 stk -Prismebredde/mål: Se bilder / teknisk tegning -Salg/pris: samlet -Totale mål: 645/79/H80 mm -Totalt vekt: 24,6 kg

Tilstand: brukt, Brukt Winkworth modell ZX500-6 rustfritt stål, kappebelagt Z-blandings-/ekstruderingsmaskin. Omtrentlig arbeidkapasitet 500 liter, total kapasitet 778 liter (produktavhengig). Kammer i 304 rustfritt stål måler ca. 1 090 mm lang x 956 mm bred x 735 mm dyp. Enheten har buet hette/lokk med låseklemmer. 304 rustfritt stål ytre kappe. Hver Z-blad drives av 30 kW motor/girboks. Rustfritt stål skrueutmatning drevet av 22 kW motor/girboks. Medfølgende kontrollpanel. Inkluderer (1) brukt Tool Temp modell TT-14500 H og (1) brukt Tool Temp modell TT-508 X varme-/kjøleenheter. Inkluderer også (3) Hydac oljekjølere montert på felles ramme. Enheten har hovedkontrollenhet og lokale operatørkontroller. Pgedpfx Aeykn Tfoqton

Tilstand: god (brukt), Utskiftbare bakker, påleggsbakker, trebakkechuck, segmentbakker, spennbakker, trinnklossbakker, trinnpåleggsbakker, klossbakker, grunnbakker, 4-bakkesett -Påleggsbakker: Bakkesett for firbakkechuck, hard Psdpozfh Auofx Aqtjgn -Bakkebredde: 26 mm -Mål: se teknisk tegning på bilde -Totale dimensjoner: 125/105/H65 mm -Totalt vekt: 4,0 kg

Tilstand: god (brukt), Utskiftbare bakker, påsatsbakker, trebakkechuck, segmentbakker, spennbakker, trinnblokk-bakker, trinnpåsatsbakker, blokk-bakker, grunnbakker, 4-bakkesett Psdpfxozfgmrj Aqtogn -Påsatsbakker: Bakke-sett for trebakke dreiechuck -Bakkebredde: 22 mm -Mål: se teknisk tegning på bildet -Totale mål: 85/65/H55 mm -Totalt vekt: 2,2 kg